Brake Hydraulic Booster Fluids

Important: To get started, click the blue "Filter Options" button to select your vehicle and then use the filters to narrow your options.

Important: To get started, select your vehicle on the left and then use the filters to narrow your options.

What is a brake hydraulic booster fluid?

Brake hydraulic booster fluid is a type of hydraulic fluid used in vehicles with power brakes. It helps with the transfer of pressure from the brake pedal to the brakes, allowing for smoother, more efficient braking.

What is the purpose of brake hydraulic booster fluid?

The purpose of brake hydraulic booster fluid is to provide the proper pressure to the brakes, allowing for smooth and efficient braking. It also helps to reduce brake fade, which is when the brakes become less effective over time due to heat build-up.

How do I know if my brake hydraulic booster fluid is faulty?

If your vehicle's brakes are not responding properly, it may be due to a faulty brake hydraulic booster fluid. If the brake pedal is hard to press, or if it feels spongy, then your brake hydraulic booster fluid may be at fault.

Can a faulty brake hydraulic booster fluid cause damage?

Yes, a faulty brake hydraulic booster fluid can cause damage to the brake system. If not replaced, it can cause worn brake pads, calipers, and rotors, as well as reduce the effectiveness of the brakes.

How do I replace my brake hydraulic booster fluid?

Replacing the brake hydraulic booster fluid requires the following steps:

  1. First, locate the brake fluid reservoir and remove the cap.
  2. Use a turkey baster or similar suction device to remove the old fluid from the reservoir.
  3. Refill the reservoir with the new brake hydraulic booster fluid.
  4. Replace the cap on the reservoir.
  5. Once the fluid is at the proper level, test the brakes to ensure they are working properly.


How often should I inspect my brake hydraulic booster fluid?

It is recommended to inspect your brake hydraulic booster fluid every 6 months or 6,000 miles, whichever comes first. This will help to ensure that your brakes are working properly and that the fluid is not contaminated or low.