{"title":"Electrical, Lighting and Body \u003e Brackets, Flanges and Hangers","description":"\u003cp\u003eFog light and headlight brackets are the structural mounting points that hold your forward lighting in precise alignment. These stamped steel or reinforced plastic brackets bolt to the bumper fascia, crash bar, or frame rail and keep your lights aimed correctly — a bent or cracked bracket throws off beam angle, which affects both your visibility and oncoming drivers. Most brackets fail after front-end impacts (even low-speed parking lot bumps), prolonged road salt exposure, or aggressive off-road use that flexes the front fascia. They rarely need replacement on schedule; damage is almost always the trigger. When buying, verify the exact mounting hole pattern and light cutout shape for your specific trim level — fog light brackets in particular vary by package (e.g., Sport vs. base trim) even within the same model year. OEM brackets guarantee fit but often cost 2–3x more than quality aftermarket options from suppliers like TYC or Dorman, which are a practical choice for most street vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadlight or fog light sits visibly low, high, or angled\u003c\/strong\u003e — if the light housing looks misaligned with the bumper or grille opening and adjustment screws are maxed out, the bracket itself is likely bent or broken at a mounting tab.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight housing moves or rattles when you push on it\u003c\/strong\u003e — a bracket with a cracked weld, snapped tab, or corroded mounting point won't hold the housing rigid; road vibration will make it worse over time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible cracking, rust-through, or deformation on the bracket\u003c\/strong\u003e — surface rust is cosmetic, but rust that's eaten through the metal or any plastic bracket with stress cracks at the mounting holes needs replacement before the light becomes a road hazard.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight went dark after a minor collision\u003c\/strong\u003e — if the bulb and wiring check out but the light is cocked sideways or pushed back into the bumper, the bracket absorbed the impact and needs to be replaced before reinstalling the housing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBumper cover or fascia replacement on the agenda\u003c\/strong\u003e — if you're already pulling the front end apart, inspect the brackets while they're accessible; replacing a damaged one now costs far less in labor than revisiting the job later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo I need to match the bracket to my exact trim level, or will any bracket for my model year fit?\u003c\/strong\u003e\n  Trim level matters more than most buyers expect. Fog light brackets especially differ between base, mid, and sport trims on the same platform — the cutout shape and bolt pattern are often unique to each. Always cross-reference your trim code or OEM part number before ordering, and double-check the product fitment notes on each listing.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAre aftermarket fog light and headlight brackets as reliable as OEM?\u003c\/strong\u003e\n  For most daily drivers, yes. Aftermarket brackets from established suppliers like Dorman or TYC use comparable steel gauge and corrosion coatings to OEM. Where OEM pulls ahead is on plastic clip geometry and paint-match priming — worth the premium if you're doing a high-quality bumper respray or the vehicle is a late-model with tight panel gaps.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eCan I replace a headlight or fog light bracket myself, and what else should I inspect at the same time?\u003c\/strong\u003e\n  Most brackets are a straightforward DIY job — remove the bumper cover or access panel, unbolt the old bracket, transfer the light housing, and reinstall. Budget 1–2 hours depending on the platform. While you're in there, inspect the headlight adjusters, wiring harness connectors, and bumper mounting clips — all are easy to address with the fascia already off.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"dorman-1592231-headlight-bracket","title":"Dorman 1592231 Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Chevrolet and Pontiac Models\u003c\/h2\u003e\u003cp\u003eThe Dorman 1592231 headlight bracket is designed to provide secure mounting for your vehicle's headlight assembly. Specifically compatible with Chevrolet Cobalt, Pontiac G4, G5, and Pursuit models, this bracket ensures proper alignment and stability for your headlights.\u003c\/p\u003e\u003ch2\u003eKey Features of the Dorman 1592231 Headlight Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eCompatible with Chevrolet Cobalt, Pontiac G4, G5, and Pursuit vehicles\u003c\/li\u003e\n\u003cli\u003eIncludes one headlight bracket per package\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper headlight alignment\u003c\/li\u003e\n\u003cli\u003eOEM-quality fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Dorman 1592231 headlight bracket is engineered to replace worn or damaged brackets on select Chevrolet and Pontiac models. This part is essential for maintaining the correct positioning of the headlight assembly, which is critical for optimal lighting performance and road safety. Manufactured to meet or exceed original equipment specifications, the bracket offers a precise fit that helps prevent headlight misalignment and vibration. The package contains one headlight bracket, making it a straightforward replacement part for your vehicle's lighting system.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Headlight Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoose or misaligned headlights causing poor illumination\u003c\/li\u003e\n\u003cli\u003eDamaged or broken mounting points from collisions or wear\u003c\/li\u003e\n\u003cli\u003eHeadlight vibration or rattling during vehicle operation\u003c\/li\u003e\n\u003cli\u003eDifficulty maintaining headlight beam adjustment\u003c\/li\u003e\n\u003cli\u003eCorrosion or deterioration of original bracket components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is parked on a level surface before installation\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery to prevent electrical issues during replacement\u003c\/li\u003e\n\u003cli\u003eRemove the headlight assembly carefully to access the bracket\u003c\/li\u003e\n\u003cli\u003eCompare the new bracket with the old one to confirm correct part number 1592231\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damaging mounting points\u003c\/li\u003e\n\u003cli\u003eAfter installation, verify headlight alignment and secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman parts are manufactured to meet strict quality standards, ensuring reliable performance and durability. The 1592231 headlight bracket undergoes rigorous testing to confirm fitment and function for Chevrolet Cobalt, Pontiac G4, G5, and Pursuit models. While specific warranty details may vary, Dorman typically offers a limited warranty covering defects in material and workmanship. Refer to the product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":43607071522997,"sku":"DWRT-1592231","price":56.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_1592231_Fro.jpg?v=1774983007"},{"product_id":"depo-08-315-2022l-ud-fog-light-bracket","title":"Depo 08-315-2022L-UD Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Nissan Altima\u003c\/h2\u003e\u003cp\u003eThe Depo 08-315-2022L-UD fog light bracket is designed specifically for Nissan Altima models, providing a secure and precise mounting solution. This part ensures your fog lights remain properly aligned and stable under various driving conditions.\u003c\/p\u003e\u003ch2\u003eKey Features of Depo Fog Light Bracket 08-315-2022L-UD\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan Altima fog light assemblies\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003eExact fitment to maintain factory alignment\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials for extended service life\u003c\/li\u003e\n\u003cli\u003eOEM-quality replacement part number 08-315-2022L-UD\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Fog Light Bracket\u003c\/h2\u003e\u003cp\u003eThis fog light bracket from Depo is engineered to meet the specific mounting requirements of Nissan Altima fog lights. The bracket provides a stable platform that prevents vibration and misalignment, which can affect fog light performance. Manufactured with corrosion-resistant materials, it withstands exposure to road debris and weather elements. The part number 08-315-2022L-UD corresponds to a direct replacement bracket, ensuring compatibility and ease of installation without modification.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Fog Light Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoose or misaligned fog lights causing reduced visibility\u003c\/li\u003e\n\u003cli\u003eDamaged or broken mounting points from minor collisions\u003c\/li\u003e\n\u003cli\u003eCorrosion or wear leading to bracket failure\u003c\/li\u003e\n\u003cli\u003eVibration-induced fog light flickering or noise\u003c\/li\u003e\n\u003cli\u003eReplacement of missing or lost fog light brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your Nissan Altima model year before installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damaging mounting points\u003c\/li\u003e\n\u003cli\u003eInspect fog light assembly and wiring during installation\u003c\/li\u003e\n\u003cli\u003eEnsure bracket is securely fastened to prevent movement\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for torque specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDepo manufactures this fog light bracket to meet industry standards for fit and durability. While specific warranty details may vary, Depo parts typically come with a limited warranty against defects in materials and workmanship. Using the correct part number 08-315-2022L-UD ensures you receive a component designed for Nissan Altima fog light systems.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626487742645,"sku":"DGKS-08-315-2022L-UD","price":12.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_083152022LUD_Fro.jpg?v=1774986106"},{"product_id":"depo-08-315-2022r-ud-fog-light-bracket","title":"Depo 08-315-2022R-UD Fog Light Bracket - Right","description":"\u003ch2\u003eReliable Fog Light Bracket for Nissan Altima\u003c\/h2\u003e\u003cp\u003eThe Depo 08-315-2022R-UD fog light bracket is designed specifically for Nissan Altima models, providing a secure mounting solution for your vehicle's fog lights. This replacement part ensures proper alignment and stability, maintaining the integrity of your lighting system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan Altima fog light assemblies\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003eExact fitment with OEM specifications\u003c\/li\u003e\n\u003cli\u003ePart number 08-315-2022R-UD for easy identification\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials to withstand road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fog light bracket by Depo is engineered to meet the precise requirements of Nissan Altima vehicles. The bracket holds the fog light securely in place, preventing vibrations and misalignment that can affect light performance. With part number 08-315-2022R-UD, this component matches the original equipment manufacturer’s design, ensuring a seamless replacement process. It is categorized under Electrical, Lighting and Body \u0026gt; Brackets, Flanges and Hangers, emphasizing its role in the vehicle’s lighting assembly.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces broken or damaged fog light brackets on Nissan Altima\u003c\/li\u003e\n\u003cli\u003ePrevents fog light misalignment and poor illumination\u003c\/li\u003e\n\u003cli\u003eEliminates rattling or loose fog light issues\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light mounting after collision repairs\u003c\/li\u003e\n\u003cli\u003eSupports fog light stability in harsh driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Depo 08-315-2022R-UD fog light bracket requires basic hand tools and moderate mechanical skill. It is recommended to disconnect the vehicle battery before starting to avoid electrical issues. Align the bracket carefully with the fog light assembly and mounting points on the Nissan Altima to ensure a secure fit. Tighten all fasteners to the manufacturer’s torque specifications to prevent loosening during operation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDepo manufactures this fog light bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, Depo parts typically undergo quality control inspections to ensure reliable performance. Using this OEM-style bracket helps maintain the safety and functionality of your Nissan Altima’s lighting system.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626487775413,"sku":"DGKS-08-315-2022R-UD","price":17.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_083152022RUD_Fro.jpg?v=1774986106"},{"product_id":"depo-312-2516l-ud-fog-light-bracket","title":"Depo 312-2516L-UD Fog Light Bracket - Left","description":"\u003ch2\u003eOverview of Depo Fog Light Bracket for Toyota Camry\u003c\/h2\u003e\u003cp\u003eThe Depo 312-2516L-UD fog light bracket is designed specifically for Toyota Camry models, providing a secure mounting solution for your vehicle's fog lights. This bracket ensures proper alignment and stability, essential for optimal fog light performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Camry fog light assemblies\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003eExact fitment with part number 312-2516L-UD\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials to withstand environmental exposure\u003c\/li\u003e\n\u003cli\u003eFacilitates proper fog light positioning and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Depo fog light bracket 312-2516L-UD is engineered to meet OEM standards for the Toyota Camry. It provides a reliable mounting point for the fog light assembly, ensuring that the light remains securely attached to the vehicle’s body. The bracket is manufactured from corrosion-resistant materials to maintain structural integrity over time, even under harsh weather conditions. This part is essential for maintaining the correct fog light angle, which is critical for visibility and safety during adverse weather.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis fog light bracket is used to replace damaged or missing mounting hardware on Toyota Camry fog light assemblies. It addresses several common issues:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLoose or misaligned fog lights causing poor illumination\u003c\/li\u003e\n\u003cli\u003eBroken or cracked brackets from minor collisions or wear\u003c\/li\u003e\n\u003cli\u003eCorrosion or rust compromising bracket strength\u003c\/li\u003e\n\u003cli\u003eDifficulty securing fog light assemblies properly\u003c\/li\u003e\n\u003cli\u003eReplacement part for restoring factory fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Depo 312-2516L-UD fog light bracket requires basic automotive tools and moderate mechanical skill. It is recommended to remove the fog light assembly carefully to avoid damage. Align the bracket precisely with the mounting points on the Toyota Camry to ensure proper fitment. Tighten all fasteners securely but avoid over-torquing to prevent damage. Verify fog light alignment after installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDepo manufactures this fog light bracket to meet or exceed OEM quality standards for the Toyota Camry. While specific warranty details are not provided, Depo parts typically come with a limited warranty against defects in materials and workmanship. Using this bracket helps maintain the integrity and safety of your vehicle’s lighting system.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626607411381,"sku":"DGKS-312-2516L-UD","price":16.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3122516LUD_Fro.jpg?v=1774986278"},{"product_id":"depo-312-2516r-ud-fog-light-bracket","title":"Depo 312-2516R-UD Fog Light Bracket - Right","description":"\u003ch2\u003eReliable Fog Light Bracket for Toyota Camry\u003c\/h2\u003e\u003cp\u003eThe Depo 312-2516R-UD fog light bracket is designed specifically for Toyota Camry models, providing a secure and precise mounting solution. This part ensures proper alignment and stability of your vehicle's fog light assembly.\u003c\/p\u003e\u003ch2\u003eKey Features of Depo 312-2516R-UD Fog Light Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Camry models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eExact fitment to maintain factory specifications\u003c\/li\u003e\n\u003cli\u003eSupports proper fog light alignment and stability\u003c\/li\u003e\n\u003cli\u003eOEM-quality replacement part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Fog Light Bracket\u003c\/h2\u003e\u003cp\u003eThe Depo 312-2516R-UD fog light bracket is engineered to meet the precise requirements of Toyota Camry vehicles. It serves as a mounting point for the fog light assembly, ensuring that the light remains securely attached to the vehicle’s body. This bracket is manufactured with durable materials to withstand road vibrations and environmental conditions, maintaining the integrity of the fog light system. Using this bracket helps preserve the original positioning and function of the fog lights, which is essential for optimal visibility in adverse weather conditions.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Fog Light Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoose or misaligned fog lights causing reduced visibility\u003c\/li\u003e\n\u003cli\u003eDamaged or broken mounting points from minor collisions\u003c\/li\u003e\n\u003cli\u003eVibration-induced wear leading to fog light instability\u003c\/li\u003e\n\u003cli\u003eReplacement of worn or corroded brackets to restore proper fit\u003c\/li\u003e\n\u003cli\u003eEnsuring compliance with vehicle safety standards for lighting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Camry models; verify year and trim for exact fit\u003c\/li\u003e\n\u003cli\u003eRemove the damaged bracket carefully to avoid fog light or bumper damage\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to secure the bracket firmly in place\u003c\/li\u003e\n\u003cli\u003eCheck fog light alignment after installation to ensure proper beam direction\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for torque specifications and detailed procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDepo manufactures the 312-2516R-UD fog light bracket to meet industry standards for fit and durability. While specific warranty details may vary, Depo parts typically come with a limited warranty against manufacturing defects. This bracket is designed to provide reliable service when installed according to manufacturer guidelines, supporting the longevity of your Toyota Camry’s lighting system.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626607444149,"sku":"DGKS-312-2516R-UD","price":16.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3122516RUD_Fro_ee1f6750-33a8-4187-b881-31f308c1a346.jpg?v=1774986279"},{"product_id":"depo-312-2517l-ud-fog-light-bracket","title":"Depo 312-2517L-UD Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Toyota Camry\u003c\/h2\u003e\u003cp\u003eThe Depo 312-2517L-UD fog light bracket is designed specifically for Toyota Camry models, providing a secure and precise mounting solution. This bracket ensures proper alignment and stability for your vehicle's fog light assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Camry fog light assemblies\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003eExact fitment with part number 312-2517L-UD\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials for extended use\u003c\/li\u003e\n\u003cli\u003eMaintains proper fog light positioning and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fog light bracket by Depo is engineered to meet the specifications required for Toyota Camry vehicles. The part number 312-2517L-UD corresponds to a left-side bracket designed to hold the fog light securely in place. Its robust design helps prevent vibrations and misalignment that can affect fog light performance. Compatible with various model years of the Toyota Camry, this bracket supports the electrical and lighting system by providing a stable mounting point.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces broken or damaged fog light brackets on Toyota Camry\u003c\/li\u003e\n\u003cli\u003eCorrects fog light misalignment issues\u003c\/li\u003e\n\u003cli\u003ePrevents fog light rattling or movement during driving\u003c\/li\u003e\n\u003cli\u003eSupports fog light assembly after minor collision repairs\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light mounting after wear and tear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Depo 312-2517L-UD fog light bracket requires basic automotive tools and moderate mechanical skill. Ensure the vehicle is parked on a level surface and the fog light assembly is removed carefully before bracket replacement. Align the bracket precisely with the mounting points on the Toyota Camry to avoid misalignment. Tighten all fasteners securely but avoid over-torquing to prevent damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDepo manufactures this fog light bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, Depo products typically undergo quality control to ensure reliable performance. Using the correct part number 312-2517L-UD guarantees compatibility and helps maintain the integrity of your Toyota Camry's lighting system.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626607476917,"sku":"DGKS-312-2517L-UD","price":16.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3122517LUD_Fro.jpg?v=1774986279"},{"product_id":"depo-312-2517r-ud-fog-light-bracket","title":"Depo 312-2517R-UD Fog Light Bracket - Right","description":"\u003ch2\u003eReliable Fog Light Bracket for Toyota Camry\u003c\/h2\u003e\u003cp\u003eThe Depo 312-2517R-UD fog light bracket is designed specifically for Toyota Camry models, providing a secure and precise mounting solution. This bracket ensures proper alignment and stability of your vehicle's fog light assembly.\u003c\/p\u003e\u003ch2\u003eKey Features of Depo 312-2517R-UD Fog Light Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Camry fog light assemblies\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003eExact fitment to maintain factory alignment\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials for extended service life\u003c\/li\u003e\n\u003cli\u003eOEM-quality replacement part number 312-2517R-UD\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Fog Light Bracket\u003c\/h2\u003e\u003cp\u003eThis fog light bracket from Depo is engineered to meet the specifications required for Toyota Camry vehicles. The part number 312-2517R-UD corresponds to a bracket that holds the fog light securely in place, preventing vibrations and misalignment that can affect lighting performance. Its robust design and corrosion-resistant finish help maintain the integrity of the mounting point under various driving conditions.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Fog Light Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoose or misaligned fog lights causing reduced visibility\u003c\/li\u003e\n\u003cli\u003eDamaged or broken mounting points from minor collisions\u003c\/li\u003e\n\u003cli\u003eCorrosion or wear leading to fog light instability\u003c\/li\u003e\n\u003cli\u003eReplacement of missing or worn brackets during fog light repairs\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fog light positioning for safety compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your Toyota Camry model year before installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damaging mounting points\u003c\/li\u003e\n\u003cli\u003eInspect fog light assembly and wiring during bracket replacement\u003c\/li\u003e\n\u003cli\u003eFollow vehicle manufacturer torque specifications for fasteners\u003c\/li\u003e\n\u003cli\u003eTest fog light alignment after installation to ensure proper function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDepo manufactures this fog light bracket to meet industry standards for fit and durability. While specific warranty details for part number 312-2517R-UD may vary, Depo parts typically come with a limited warranty against defects in materials and workmanship. Always consult the warranty documentation provided with the part for exact coverage terms.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626607509685,"sku":"DGKS-312-2517R-UD","price":16.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3122517RUD_Fro.jpg?v=1774986279"},{"product_id":"depo-330-1705r-ud-fog-light-bracket","title":"Depo 330-1705R-UD Fog Light Bracket - Right","description":"\u003ch2\u003eOverview of Depo Fog Light Bracket for Ford F-150\u003c\/h2\u003e\u003cp\u003eThe Depo 330-1705R-UD fog light bracket is designed specifically for Ford F-150 models, providing a reliable mounting solution for your vehicle's fog lights. This bracket ensures proper alignment and secure attachment, maintaining the integrity of your lighting system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford F-150 models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting use\u003c\/li\u003e\n\u003cli\u003ePrecise fitment with OEM specifications\u003c\/li\u003e\n\u003cli\u003ePart number 330-1705R-UD for easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned to support fog light assembly securely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Depo fog light bracket 330-1705R-UD is engineered to meet the exact requirements of Ford F-150 vehicles. This bracket provides a stable mounting point for the fog light assembly, helping to maintain proper positioning and preventing vibration or misalignment. Manufactured with quality materials, it offers durability and resistance to environmental factors such as moisture and road debris. The bracket’s design aligns with factory specifications, ensuring a straightforward installation process and compatibility with existing fog light components.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken fog light brackets on Ford F-150\u003c\/li\u003e\n\u003cli\u003eCorrects misaligned fog lights causing poor illumination\u003c\/li\u003e\n\u003cli\u003eSecures loose fog light assemblies to prevent rattling\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light positioning after collision repairs\u003c\/li\u003e\n\u003cli\u003eSupports fog light stability in off-road or rough driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Depo 330-1705R-UD fog light bracket is designed to be straightforward for technicians familiar with Ford F-150 lighting components. It is recommended to verify the bracket’s alignment before final tightening to ensure optimal fog light positioning. Use appropriate tools to avoid damage to mounting points and check for secure attachment after installation. Refer to the vehicle’s service manual for specific torque specifications and safety precautions.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDepo manufactures this fog light bracket to meet industry standards for fit and function. While specific warranty details are not provided, Depo products typically undergo quality control inspections to ensure reliability. For warranty information, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43629128351925,"sku":"DGKS-330-1705R-UD","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3301705RUD_Fro.jpg?v=1774986575"},{"product_id":"depo-334-1702l-ud-headlight-bracket","title":"Depo 334-1702L-UD Headlight Bracket - Left","description":"\u003ch2\u003eReliable Headlight Bracket for Dodge Ram Trucks\u003c\/h2\u003e\u003cp\u003eThe Depo 334-1702L-UD headlight bracket is designed to provide secure mounting for your vehicle's headlight assembly. Engineered for compatibility with various Dodge Ram models, this bracket ensures proper alignment and stability for your headlights.\u003c\/p\u003e\u003ch2\u003eKey Features of Depo 334-1702L-UD Headlight Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Dodge Ram 1500, 1500 Classic, 2500, 3500, Ram 1500, Ram 2500, and Ram 3500 models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003ePrecise fitment to maintain headlight alignment\u003c\/li\u003e\n\u003cli\u003eOEM-quality replacement part number 334-1702L-UD\u003c\/li\u003e\n\u003cli\u003eDesigned for electrical, lighting, and body mounting applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Headlight Bracket\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from Depo is specifically manufactured to fit a range of Dodge Ram trucks, including the 1500, 1500 Classic, 2500, and 3500 series. The bracket provides a stable mounting point for the headlight assembly, helping to maintain proper positioning and prevent vibration or misalignment. Its robust design supports the headlight securely, contributing to consistent lighting performance and vehicle safety. The part number 334-1702L-UD corresponds to this exact bracket, ensuring compatibility and ease of replacement.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of damaged or broken headlight brackets on Dodge Ram trucks\u003c\/li\u003e\n\u003cli\u003eCorrecting headlight misalignment caused by worn or bent brackets\u003c\/li\u003e\n\u003cli\u003eRestoring secure headlight mounting after collision repairs\u003c\/li\u003e\n\u003cli\u003ePreventing headlight vibration and movement during vehicle operation\u003c\/li\u003e\n\u003cli\u003eMaintaining proper headlight beam direction for safe night driving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle compatibility with Dodge Ram 1500, 1500 Classic, 2500, or 3500 models before installation\u003c\/li\u003e\n\u003cli\u003eRemove the damaged bracket carefully to avoid damaging the headlight assembly\u003c\/li\u003e\n\u003cli\u003eAlign the new Depo 334-1702L-UD bracket precisely to maintain headlight positioning\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to secure the bracket firmly without over-tightening\u003c\/li\u003e\n\u003cli\u003eTest headlight alignment and adjust if necessary after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDepo manufactures this headlight bracket to meet industry standards for durability and fitment. While specific warranty details may vary, Depo parts typically come with a limited warranty against defects in materials and workmanship. Using the correct part number 334-1702L-UD ensures you receive a component designed for your Dodge Ram 1500, 1500 Classic, 2500, or 3500 model, supporting reliable vehicle operation.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43629359759541,"sku":"DGKS-334-1702L-UD","price":57.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3341702LUD_Fro.jpg?v=1774986748"},{"product_id":"depo-334-1702r-ud-headlight-bracket","title":"Depo 334-1702R-UD Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Dodge Ram Models\u003c\/h2\u003e\u003cp\u003eThe Depo 334-1702R-UD headlight bracket is designed to provide secure mounting for your vehicle's headlight assembly. Engineered specifically for Dodge Ram trucks, this bracket ensures proper alignment and stability for optimal lighting performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Dodge Ram 1500, 1500 Classic, 2500, 3500, Ram 1500, Ram 2500, and Ram 3500 models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003eDirect replacement part number 334-1702R-UD for easy identification\u003c\/li\u003e\n\u003cli\u003eEnsures proper headlight alignment and fitment\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials for extended service life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from Depo is tailored to fit a range of Dodge Ram trucks, including the 1500, 1500 Classic, 2500, and 3500 series. The part number 334-1702R-UD corresponds to a precise replacement component that maintains the original equipment specifications. By using this bracket, you can restore the headlight assembly's secure positioning, which is critical for maintaining proper beam direction and vehicle safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for broken or damaged headlight brackets\u003c\/li\u003e\n\u003cli\u003eCorrects misaligned headlights causing poor visibility\u003c\/li\u003e\n\u003cli\u003eResolves rattling or loose headlight assemblies\u003c\/li\u003e\n\u003cli\u003ePrevents water intrusion by maintaining proper headlight seal\u003c\/li\u003e\n\u003cli\u003eSupports headlight stability after collision repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Depo 334-1702R-UD headlight bracket requires basic hand tools and moderate mechanical skill. It is recommended to disconnect the vehicle battery before beginning work to avoid electrical issues. Align the bracket carefully to ensure the headlight assembly fits securely and the beam pattern is correct. Refer to the vehicle’s service manual for torque specifications and detailed installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDepo manufactures this headlight bracket to meet or exceed OEM standards, ensuring reliable fit and function. While specific warranty details may vary, Depo typically offers coverage against manufacturing defects. Using this genuine replacement part helps maintain the integrity of your Dodge Ram’s lighting system.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43629359857845,"sku":"DGKS-334-1702R-UD","price":57.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3341702RUD_Fro.jpg?v=1774986748"},{"product_id":"vaico-v30-1600-headlight-bracket","title":"Vaico V30-1600 Headlight Bracket - Front Left","description":"\u003ch2\u003eOverview of the VAICO Headlight Bracket V30-1600\u003c\/h2\u003e\u003cp\u003eThe VAICO V30-1600 headlight bracket is designed specifically for select Mercedes-Benz models, including the E55 AMG, E320, E350, and E500 up to the 2006 model year. This durable plastic bracket ensures proper headlight alignment and secure mounting, maintaining the integrity of your vehicle's lighting system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz E55 AMG, E320, E350, and E500 (up to 2006)\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality plastic for durability and lightweight performance\u003c\/li\u003e\n\u003cli\u003eDimensions: 260 mm length, 140 mm width, 42 mm height\u003c\/li\u003e\n\u003cli\u003ePart number: V30-1600 for precise identification\u003c\/li\u003e\n\u003cli\u003eCompact packaging size: 26 cm depth, 14 cm width, 4.2 cm height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.128 kg for easy handling and installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVAICO Brand Line and Product Quality\u003c\/h2\u003e\u003cp\u003eThe VAICO brand line is known for providing reliable automotive replacement parts that meet OEM standards. This headlight bracket from VAICO is engineered to offer a precise fit and consistent performance for Mercedes-Benz vehicles. The focus on quality materials and exact specifications ensures compatibility and longevity in demanding automotive environments.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe VAICO V30-1600 headlight bracket is molded from durable plastic, offering a balance of strength and lightweight construction. Measuring 260 mm in length, 140 mm in width, and 42 mm in height, this bracket is designed to securely hold the headlight assembly in place, preventing misalignment or vibration. Its compatibility with Mercedes-Benz E55 AMG, E320, E350, and E500 models up to 2006 ensures a direct replacement without modification. The part's compact packaging and low weight facilitate easy shipping and handling.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of broken or cracked headlight brackets\u003c\/li\u003e\n\u003cli\u003eCorrection of headlight misalignment or instability\u003c\/li\u003e\n\u003cli\u003eRestoration of proper headlight mounting after collision repairs\u003c\/li\u003e\n\u003cli\u003ePrevention of headlight vibration and noise during vehicle operation\u003c\/li\u003e\n\u003cli\u003eMaintaining OEM fitment and appearance for Mercedes-Benz E-Class models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle compatibility with Mercedes-Benz E55 AMG, E320, E350, or E500 up to 2006 before installation\u003c\/li\u003e\n\u003cli\u003eHandle the plastic bracket carefully to avoid damage during installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to remove the old bracket and secure the new one firmly\u003c\/li\u003e\n\u003cli\u003eCheck headlight alignment after installation to confirm proper fitment\u003c\/li\u003e\n\u003cli\u003eConsult the vehicle’s service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe VAICO V30-1600 headlight bracket is manufactured to meet strict quality standards, ensuring reliable performance and durability. While specific warranty details may vary, VAICO parts typically come with a limited warranty against manufacturing defects. This part is designed to provide a dependable replacement solution for Mercedes-Benz E-Class vehicles requiring headlight bracket repair or replacement.\u003c\/p\u003e","brand":"Vaico","offers":[{"title":"Default Title","offer_id":45216263602357,"sku":"CMTX-V30-1600","price":114.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/VC_V301600_Fro.jpg?v=1775136194"},{"product_id":"vaico-v30-1601-headlight-bracket","title":"Vaico V30-1601 Headlight Bracket - Front Right","description":"\u003ch2\u003eOverview of the VAICO Headlight Bracket V30-1601\u003c\/h2\u003e\u003cp\u003eThe VAICO headlight bracket V30-1601 is designed for secure and precise mounting of headlights on select Mercedes-Benz models. Engineered from durable plastic, this bracket ensures proper alignment and stability for your vehicle's lighting system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz E55 AMG, E63 AMG, E280, E300, E320, E350, E500, and E550 models\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality plastic material for durability\u003c\/li\u003e\n\u003cli\u003eDimensions: 260 mm length, 140 mm width, 42 mm height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.128 kg for easy handling\u003c\/li\u003e\n\u003cli\u003ePart number V30-1601 for accurate identification and fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from VAICO is specifically designed to fit Mercedes-Benz vehicles up to the 2006 model year, including popular E-Class variants such as the E55 AMG and E350. The bracket measures 260 mm in length, 140 mm in width, and 42 mm in height, providing a precise fit for the headlight assembly. Made from robust plastic, it offers resistance to wear and environmental factors while maintaining a lightweight profile of just 0.128 kg. The part number V30-1601 ensures compatibility and ease of ordering for maintenance or repair tasks.\u003c\/p\u003e\u003cp\u003eThe VAICO brand line is known for delivering reliable automotive components that meet OEM standards. This headlight bracket is part of VAICO's electrical, lighting, and body category, focusing on brackets, flanges, and hangers that support vehicle lighting systems. Using VAICO parts helps maintain the structural integrity and alignment of your vehicle's headlights.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of damaged or broken headlight brackets on Mercedes-Benz E-Class models\u003c\/li\u003e\n\u003cli\u003eCorrecting misaligned headlights due to bracket wear or impact\u003c\/li\u003e\n\u003cli\u003eRestoring secure headlight mounting after collision repairs\u003c\/li\u003e\n\u003cli\u003ePreventing headlight vibration and movement during driving\u003c\/li\u003e\n\u003cli\u003eEnsuring proper headlight positioning for optimal road illumination\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your specific Mercedes-Benz model and year before installation\u003c\/li\u003e\n\u003cli\u003eHandle the plastic bracket carefully to avoid damage during fitting\u003c\/li\u003e\n\u003cli\u003eEnsure all mounting points are clean and free of debris for secure attachment\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid over-tightening and potential bracket cracking\u003c\/li\u003e\n\u003cli\u003eCheck headlight alignment after installation to confirm proper positioning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eVAICO parts are manufactured to meet or exceed OEM specifications, ensuring reliable performance and fitment. The V30-1601 headlight bracket undergoes quality control inspections to maintain consistency and durability. While specific warranty details may vary, VAICO typically offers coverage against manufacturing defects to provide confidence in your purchase.\u003c\/p\u003e","brand":"Vaico","offers":[{"title":"Default Title","offer_id":45216263667893,"sku":"CMTX-V30-1601","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/VC_V301601_Fro_269f41c9-2563-4a80-a657-71aa3d196afe.jpg?v=1775136195"},{"product_id":"eagle-eye-gm364-bracketr-headlight-bracket-right","title":"Eagle Eye GM364-BRACKETR Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Chevrolet Cobalt and Pontiac G5\u003c\/h2\u003e\u003cp\u003eThe Eagle Eye GM364-BRACKETR headlight bracket is designed to provide secure and precise mounting for the right headlight assembly on select Chevrolet and Pontiac models. Engineered to meet OEM specifications, this bracket ensures proper alignment and stability for your vehicle's lighting system.\u003c\/p\u003e\u003ch2\u003eKey Features of the Eagle Eye GM364-BRACKETR Headlight Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet Cobalt and Pontiac G5 right headlight assemblies\u003c\/li\u003e\n\u003cli\u003eDurable construction with dimensions of 13.48 x 12.76 x 8.35 inches\u003c\/li\u003e\n\u003cli\u003eLightweight design weighing approximately 3.69 pounds\u003c\/li\u003e\n\u003cli\u003eClear lens color compatibility for optimal light transmission\u003c\/li\u003e\n\u003cli\u003eOperates on standard 12-volt electrical systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from Eagle Eye is specifically designed for the right side of Chevrolet Cobalt and Pontiac G5 vehicles. With precise dimensions of 13.48 x 12.76 x 8.35 inches, it fits securely to maintain the correct positioning of the headlight assembly. The bracket supports clear lens headlights and is compatible with 12-volt systems, ensuring seamless integration with your vehicle's electrical setup. Weighing just under 4 pounds, it offers a balance of strength and ease of handling during installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or broken right headlight brackets on Chevrolet Cobalt and Pontiac G5\u003c\/li\u003e\n\u003cli\u003eCorrects misaligned headlights caused by worn or bent mounting brackets\u003c\/li\u003e\n\u003cli\u003eRestores proper headlight positioning to improve road visibility and safety\u003c\/li\u003e\n\u003cli\u003eSupports clear lens headlights for consistent light output\u003c\/li\u003e\n\u003cli\u003eEnsures stable mounting to prevent headlight vibration or movement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Eagle Eye GM364-BRACKETR headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is disconnected from the power source. Align the bracket carefully with existing mounting points on the right side of the vehicle. Use appropriate tools to secure the bracket firmly without over-tightening to avoid damage. Verify headlight alignment after installation to maintain optimal lighting performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eEagle Eye manufactures this headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, the product is designed to offer reliable service when installed according to manufacturer guidelines. For best results, use this bracket as a direct replacement part for Chevrolet Cobalt and Pontiac G5 right headlight assemblies.\u003c\/p\u003e","brand":"Eagle Eye","offers":[{"title":"Default Title","offer_id":51905649246389,"sku":"CFQK-GM364-BRACKETR","price":22.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7E_GM364BRACKETR_Fro.jpg?v=1774987139"},{"product_id":"dorman-42446-parking-aid-sensor-bracket-front-or-rear","title":"Dorman 42446 Parking Aid Sensor Bracket - Front or Rear","description":"\u003ch2\u003eReliable Parking Aid Sensor Bracket for Ram 1500 Models\u003c\/h2\u003e\u003cp\u003eThe Dorman 42446 Parking Aid Sensor Bracket is designed specifically for Ram 1500 and 1500 Classic trucks. Crafted from durable black plastic, this bracket ensures secure mounting of parking sensors to maintain optimal sensor performance and vehicle safety.\u003c\/p\u003e\u003ch2\u003eKey Features of Dorman 42446 Parking Aid Sensor Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConstructed from sturdy black plastic for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSpecific fitment for Ram 1500 and 1500 Classic models\u003c\/li\u003e\n\u003cli\u003eDimensions: 33.4 mm width, 31 mm height, and 1.2 mm material thickness\u003c\/li\u003e\n\u003cli\u003eClip-on attachment method for straightforward sensor installation\u003c\/li\u003e\n\u003cli\u003eIncludes five sensor bezels for proper sensor alignment\u003c\/li\u003e\n\u003cli\u003ePrecise mounting hole configuration: one hole on Axis 1 and two holes each on Axis 2 and Axis 3\u003c\/li\u003e\n\u003cli\u003eInside diameter of 0.67 inches and outside diameter of 1.2 inches for sensor compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Dorman 42446 Sensor Bracket\u003c\/h2\u003e\u003cp\u003eThis parking aid sensor bracket by Dorman is engineered to provide a secure and exact fit for parking sensors on Ram 1500 and 1500 Classic trucks. The black plastic construction offers resistance to environmental factors, helping maintain sensor integrity over time. The bracket’s clip-on attachment method simplifies installation without the need for additional mounting hardware. Its specific dimensions and mounting hole layout ensure proper alignment and stability of the parking sensors, which is critical for accurate obstacle detection and parking assistance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of damaged or broken parking aid sensor brackets on Ram 1500 and 1500 Classic\u003c\/li\u003e\n\u003cli\u003eRestoring proper sensor alignment to improve parking sensor accuracy\u003c\/li\u003e\n\u003cli\u003eSecuring loose or rattling parking sensors caused by worn or missing brackets\u003c\/li\u003e\n\u003cli\u003eMaintaining sensor functionality after minor collision repairs\u003c\/li\u003e\n\u003cli\u003eEnsuring compatibility with factory sensor bezels for seamless integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned for clip-on installation; no mounting hardware included or required\u003c\/li\u003e\n\u003cli\u003eVerify sensor bezel alignment before finalizing installation to ensure accurate sensor readings\u003c\/li\u003e\n\u003cli\u003eHandle the plastic bracket carefully to avoid damage during installation\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for sensor removal and reinstallation procedures specific to Ram 1500 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman parts are manufactured to meet or exceed OEM standards for fit, form, and function. The 42446 Parking Aid Sensor Bracket undergoes quality checks to ensure durability and reliable performance. Please refer to Dorman’s warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":52118529310901,"sku":"BCZF-42446","price":25.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/MM_42446_Fro.jpg?v=1775162027"},{"product_id":"dorman-42448-parking-aid-sensor-bracket-rear","title":"Dorman 42448 Parking Aid Sensor Bracket - Rear","description":"\u003ch2\u003eReliable Parking Aid Sensor Bracket for Ford F-150\u003c\/h2\u003e\u003cp\u003eThe Dorman 42448 Parking Aid Sensor Bracket is designed specifically for Ford F-150 models, providing a secure and precise mounting solution for your vehicle's parking sensors. Crafted from durable black plastic, this bracket ensures consistent sensor alignment and reliable performance.\u003c\/p\u003e\u003ch2\u003eKey Features of Dorman 42448 Parking Aid Sensor Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConstructed from sturdy black plastic for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eExact fitment for Ford F-150 parking aid sensors, ensuring proper sensor placement\u003c\/li\u003e\n\u003cli\u003eDimensions: approximately 30 mm length, 27.4 mm width, and 27.4 mm height for precise compatibility\u003c\/li\u003e\n\u003cli\u003eClip-on attachment method for straightforward installation without additional hardware\u003c\/li\u003e\n\u003cli\u003eIncludes four sensor bezels for complete sensor mounting support\u003c\/li\u003e\n\u003cli\u003eMultiple mounting holes (one on Axis 1, two each on Axis 2 and Axis 3) for secure sensor positioning\u003c\/li\u003e\n\u003cli\u003eInside diameter of 22.28 mm and outside diameter of 25.59 mm to accommodate sensor size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Dorman 42448 Sensor Bracket\u003c\/h2\u003e\u003cp\u003eThis parking aid sensor bracket from Dorman is engineered to meet the specific requirements of Ford F-150 vehicles. Made from high-quality plastic, it offers a balance of strength and lightweight design. The bracket’s dimensions and mounting hole configuration are tailored to hold parking sensors firmly in place, preventing sensor misalignment or damage during vehicle operation. The clip-on attachment method simplifies installation, allowing for a secure fit without the need for mounting hardware. The included four sensor bezels provide additional support and protection for the sensors, ensuring optimal functionality.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of damaged or broken parking aid sensor brackets on Ford F-150 models\u003c\/li\u003e\n\u003cli\u003eRestoring proper sensor alignment to improve parking aid system accuracy\u003c\/li\u003e\n\u003cli\u003eSecuring loose or rattling parking sensors caused by worn or missing brackets\u003c\/li\u003e\n\u003cli\u003eMaintaining sensor protection from road debris and environmental exposure\u003c\/li\u003e\n\u003cli\u003eEnsuring consistent sensor performance for safe parking assistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Dorman 42448 bracket is designed for clip-on installation, which allows for a straightforward replacement process. No mounting hardware is included, so retain original fasteners if possible. Carefully align the bracket with the sensor and mounting points on the Ford F-150 to ensure a secure fit. Verify sensor positioning after installation to maintain accurate parking aid system operation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. While specific warranty details for part number 42448 are not provided, Dorman typically offers limited warranties covering defects in material and workmanship. Using this bracket helps maintain the integrity of your Ford F-150’s parking aid system with a quality replacement component.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":52118529376437,"sku":"BCZF-42448","price":27.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/MM_42448_Fro.jpg?v=1775162027"},{"product_id":"professional-parts-sweden-34438951-fog-light-bracket","title":"Professional Parts Sweden 34438951 Fog Light Bracket","description":"\u003ch2\u003eReliable Fog Light Bracket for Volvo XC90\u003c\/h2\u003e\u003cp\u003eThe Professional Parts Sweden fog light bracket, part number 34438951, is designed specifically for Volvo XC90 models equipped with fog lights. This bracket ensures secure mounting and proper alignment of your vehicle's fog lights to maintain optimal lighting performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo XC90 vehicles featuring factory-installed fog lights\u003c\/li\u003e\n\u003cli\u003eDirect replacement part matching chassis number -628376\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003ePrecision fit to maintain correct fog light positioning\u003c\/li\u003e\n\u003cli\u003ePart number 34438951 for easy identification and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis fog light bracket from Professional Parts Sweden is engineered to meet the exact specifications required for Volvo XC90 models with fog lights. The bracket mounts securely to the chassis, referenced by chassis number -628376, providing a stable base for the fog light assembly. Its robust design helps prevent vibrations and misalignment, which can affect fog light effectiveness and safety. The part number 34438951 corresponds to this specific bracket, ensuring compatibility and ease of replacement.\u003c\/p\u003e\u003ch2\u003eIntended Use and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or corroded fog light brackets on Volvo XC90\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light alignment and stability\u003c\/li\u003e\n\u003cli\u003ePrevents fog light movement caused by road vibrations\u003c\/li\u003e\n\u003cli\u003eSupports vehicles with factory-installed fog light equipment\u003c\/li\u003e\n\u003cli\u003eHelps maintain vehicle lighting compliance and safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the fog light bracket 34438951, ensure the vehicle chassis number matches -628376 for proper fitment. Use appropriate tools to avoid damaging mounting points. Align the bracket carefully to maintain correct fog light positioning. It is recommended to inspect the fog light assembly and wiring during installation to confirm full functionality.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eProfessional Parts Sweden manufactures this fog light bracket to meet OEM standards for fit and durability. While specific warranty details are not provided, the part is produced under strict quality controls to ensure reliable performance on Volvo XC90 vehicles equipped with fog lights.\u003c\/p\u003e","brand":"Professional Parts Sweden","offers":[{"title":"Default Title","offer_id":52120650711221,"sku":"FNJW-34438951","price":100.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PS_34438951_Fro.jpg?v=1775162619"},{"product_id":"dorman-1592230-headlight-bracket-left","title":"Dorman 1592230 Headlight Bracket - Left","description":"\u003ch2\u003eReliable Headlight Bracket for Chevrolet and Pontiac Models\u003c\/h2\u003e\u003cp\u003eThe Dorman 1592230 headlight bracket is designed to provide secure and stable mounting for your vehicle's headlight assembly. Engineered specifically for select Chevrolet and Pontiac models, this bracket ensures proper alignment and support for optimal lighting performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003eCompatible with Chevrolet Cobalt, Pontiac G4, G5, and Pursuit models\u003c\/li\u003e\n\u003cli\u003eDirect replacement part number 1592230 for easy identification\u003c\/li\u003e\n\u003cli\u003eEnsures proper headlight alignment and stability\u003c\/li\u003e\n\u003cli\u003ePackage contains one headlight bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from Dorman is a direct replacement designed to fit Chevrolet Cobalt, Pontiac G4, G5, and Pursuit vehicles. The part number 1592230 corresponds to a bracket that secures the headlight assembly firmly in place, preventing misalignment and vibration. Proper fitment is critical to maintain the integrity of your vehicle’s lighting system and to ensure safety on the road.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for broken or cracked headlight brackets\u003c\/li\u003e\n\u003cli\u003eFixes headlight misalignment issues causing poor illumination\u003c\/li\u003e\n\u003cli\u003eEliminates rattling or movement of the headlight assembly\u003c\/li\u003e\n\u003cli\u003eRestores proper headlight positioning after collision damage\u003c\/li\u003e\n\u003cli\u003eSupports headlight housing to prevent premature wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 1592230 headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is properly supported during removal. Align the bracket carefully to the mounting points on the Chevrolet Cobalt or Pontiac G4, G5, or Pursuit to avoid stress on the headlight housing. Tighten all fasteners securely but avoid over-torquing to prevent damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 1592230 headlight bracket undergoes quality checks to ensure fit and function. Please refer to Dorman’s warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":52123081572533,"sku":"DWRT-1592230","price":50.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_1592230_Fro.jpg?v=1775162771"},{"product_id":"uro-2188800430-headlight-bracket-left-or-right","title":"URO 2188800430 Headlight Bracket - Left or Right","description":"\u003ch2\u003eReliable Headlight Bracket for Select Mercedes-Benz Models\u003c\/h2\u003e\u003cp\u003eThe URO headlight bracket 2188800430 is designed to provide secure and precise mounting for headlights on various Mercedes-Benz vehicles. Engineered to meet OEM specifications, this bracket ensures proper alignment and stability for your vehicle's lighting system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz C63 AMG, C250, C300, C350, CLS63 AMG, CLS550, E63 AMG, E350, E400, E550, GLK250, and GLK350 models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eExact fitment to maintain headlight positioning and alignment\u003c\/li\u003e\n\u003cli\u003eOEM-quality replacement part with part number 2188800430\u003c\/li\u003e\n\u003cli\u003eDesigned to support electrical and lighting components securely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis URO headlight bracket (part number 2188800430) is specifically engineered for a range of Mercedes-Benz vehicles, including popular models such as the C63 AMG, CLS550, and E63 AMG. The bracket is part of the Electrical, Lighting and Body category, focusing on brackets, flanges, and hangers that support headlight assemblies. Its precise design ensures that headlights remain properly aligned, which is critical for optimal road illumination and safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces broken or damaged headlight mounting brackets\u003c\/li\u003e\n\u003cli\u003eCorrects misaligned headlights causing poor beam focus\u003c\/li\u003e\n\u003cli\u003eEliminates rattling or movement of headlight assemblies\u003c\/li\u003e\n\u003cli\u003eRestores structural support for headlight electrical components\u003c\/li\u003e\n\u003cli\u003ePrevents water ingress by maintaining proper headlight seal alignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the URO headlight bracket 2188800430, ensure the vehicle is parked on a level surface and the headlight assembly is carefully removed to avoid damage. Align the bracket precisely with factory mounting points on the Mercedes-Benz model to maintain correct headlight positioning. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause deformation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eURO parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. While specific warranty details for part number 2188800430 are not provided, URO products typically come with a limited warranty against defects in materials and workmanship. For best results, verify compatibility with your Mercedes-Benz model before installation.\u003c\/p\u003e","brand":"URO","offers":[{"title":"Default Title","offer_id":52130080882869,"sku":"DDWC-2188800430","price":20.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/UR_2188800430_Fro.jpg?v=1775163557"},{"product_id":"depo-330-1705l-ud-fog-light-bracket-left","title":"Depo 330-1705L-UD Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Ford F-150\u003c\/h2\u003e\u003cp\u003eThe Depo 330-1705L-UD fog light bracket is designed specifically for Ford F-150 models, providing a secure and precise mounting solution. This bracket ensures proper alignment and stability for your vehicle's fog light assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford F-150 fog light assemblies\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003eExact fitment with part number 330-1705L-UD\u003c\/li\u003e\n\u003cli\u003eMaintains proper fog light positioning and alignment\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials for extended service life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Depo fog light bracket 330-1705L-UD is engineered to meet the specifications required for Ford F-150 vehicles. It serves as a mounting point for the fog light, ensuring it remains securely attached to the vehicle’s body. This bracket is manufactured with materials that resist corrosion and wear, helping maintain the integrity of the fog light assembly over time. The precise fitment reduces the risk of vibration or misalignment, which can affect fog light performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken fog light brackets on Ford F-150\u003c\/li\u003e\n\u003cli\u003ePrevents fog light misalignment caused by worn mounting points\u003c\/li\u003e\n\u003cli\u003eEliminates rattling or loose fog light assemblies\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light positioning for optimal visibility\u003c\/li\u003e\n\u003cli\u003eSupports fog light stability after minor front-end impacts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Depo 330-1705L-UD fog light bracket, ensure the vehicle is parked on a level surface and the fog light assembly is handled carefully to avoid damage. Align the bracket with the existing mounting points on the Ford F-150 and secure it firmly. Double-check the fog light alignment after installation to confirm proper positioning. No additional modifications are typically required for a direct fit.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDepo manufactures this fog light bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, Depo products generally undergo quality control to ensure reliable performance. Using the correct part number 330-1705L-UD guarantees compatibility with Ford F-150 models, supporting consistent fog light operation.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":52142676639925,"sku":"DGKS-330-1705L-UD","price":29.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3301705LUD_Fro.jpg?v=1775497212"},{"product_id":"techpro-bm2508103-headlight-bracket-left","title":"TechPro BM2508103 Headlight Bracket - Left","description":"\u003ch2\u003eOverview of TechPro Headlight Bracket BM2508103\u003c\/h2\u003e\u003cp\u003eThe TechPro headlight bracket BM2508103 is designed specifically for BMW 323i, 328i, 335d, and 335i models. This durable bracket ensures proper alignment and secure mounting of your vehicle's headlight assembly, maintaining optimal lighting performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW 323i, 328i, 335d, and 335i models\u003c\/li\u003e\n\u003cli\u003eDimensions: 25.35 inches length, 10.92 inches width, 5.07 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 1 lb for easy handling\u003c\/li\u003e\n\u003cli\u003eConstructed for reliable headlight support and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Design Details\u003c\/h2\u003e\u003cp\u003eThe BM2508103 headlight bracket measures 25.35 inches in length, 10.92 inches in width, and 5.07 inches in height, providing a precise fit for the specified BMW models. Weighing just 1 pound, this bracket offers a balance of strength and lightweight construction, which helps maintain the integrity of the headlight assembly without adding unnecessary weight. The bracket is engineered to hold the headlight securely in place, preventing misalignment caused by vibrations or minor impacts.\u003c\/p\u003e\u003ch2\u003eApplication and Common Use Cases\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of damaged or worn headlight brackets on BMW 323i, 328i, 335d, and 335i\u003c\/li\u003e\n\u003cli\u003eRestoring proper headlight alignment to improve nighttime visibility\u003c\/li\u003e\n\u003cli\u003eSecuring headlight assemblies after collision repairs\u003c\/li\u003e\n\u003cli\u003ePreventing headlight movement that can cause uneven beam patterns\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro BM2508103 headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is clean and free of debris. Align the bracket carefully with the mounting points on the BMW 323i, 328i, 335d, or 335i to avoid stress on the headlight housing. Use appropriate tools to tighten mounting bolts securely but avoid over-tightening, which could damage the bracket or headlight components.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the BM2508103 headlight bracket to meet OEM standards for fit and durability. While specific warranty details are not provided, TechPro products typically undergo quality control inspections to ensure reliable performance. For peace of mind, verify warranty coverage with the point of purchase or manufacturer documentation.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52190881972405,"sku":"HYNX-BM2508103","price":43.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_BM2508103_Fro.jpg?v=1775593087"},{"product_id":"techpro-ch2602101-fog-light-bracket-left","title":"TechPro CH2602101 Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Dodge Durango\u003c\/h2\u003e\u003cp\u003eThe TechPro CH2602101 fog light bracket is designed specifically for Dodge Durango models, providing a secure and precise mounting solution. Engineered to maintain proper alignment and support of your vehicle's fog lights, this bracket ensures consistent lighting performance.\u003c\/p\u003e\u003ch2\u003eKey Features of TechPro CH2602101 Fog Light Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 7.02 inches length, 4.29 inches width, and 4.29 inches height for exact fitment\u003c\/li\u003e\n\u003cli\u003eLightweight design at 1 lb for easy handling and installation\u003c\/li\u003e\n\u003cli\u003eDurable construction tailored for Dodge Durango fog light mounting\u003c\/li\u003e\n\u003cli\u003ePart number CH2602101 ensures compatibility and easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis fog light bracket from TechPro is crafted to meet the specific mounting requirements of Dodge Durango vehicles. With precise dimensions of 7.02 inches in length, 4.29 inches in both width and height, and weighing just 1 pound, it offers a balanced combination of strength and lightweight design. The bracket supports the fog light assembly securely, helping maintain proper alignment and preventing vibrations or misplacement during vehicle operation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or broken fog light brackets on Dodge Durango\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light alignment to improve visibility in adverse weather\u003c\/li\u003e\n\u003cli\u003ePrevents fog light movement caused by worn or missing mounting hardware\u003c\/li\u003e\n\u003cli\u003eSupports fog light stability after minor front-end impacts\u003c\/li\u003e\n\u003cli\u003eEnsures secure mounting for aftermarket or OEM fog light assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro CH2602101 fog light bracket, verify the bracket dimensions against your existing mounting points to ensure compatibility. The lightweight design facilitates handling during installation. Use appropriate tools to secure the bracket firmly without over-tightening to avoid damage. This bracket is designed specifically for Dodge Durango models, so confirm vehicle fitment before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures this fog light bracket to meet industry standards for durability and fitment. While no specific warranty information is provided, TechPro products typically undergo quality control to ensure reliable performance. Using the correct part number CH2602101 helps guarantee compatibility with your Dodge Durango fog light system.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192029835445,"sku":"HYNX-CH2602101","price":34.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_CH2602101_Fro.jpg?v=1775593199"},{"product_id":"techpro-fo2508103-headlight-bracket-left","title":"TechPro FO2508103 Headlight Bracket - Left","description":"\u003ch2\u003eReliable Headlight Bracket for Ford Escape\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2508103 headlight bracket is designed specifically for Ford Escape models, providing a precise fit and durable support for your vehicle's headlight assembly. Engineered to maintain proper headlight alignment, this bracket ensures consistent lighting performance and vehicle safety.\u003c\/p\u003e\u003ch2\u003eKey Features of TechPro FO2508103 Headlight Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Escape models\u003c\/li\u003e\n\u003cli\u003eDimensions: 14.6 inches length, 5.9 inches height, 2.4 inches width\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.34 lbs for easy handling\u003c\/li\u003e\n\u003cli\u003eConstructed for secure headlight mounting and stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2508103 headlight bracket measures 14.6 inches in length, 5.9 inches in height, and 2.4 inches in width, making it an ideal replacement part for the Ford Escape. Weighing just 0.34 pounds, this bracket offers a balance of strength and lightweight construction, which helps maintain the integrity of the headlight assembly without adding unnecessary weight. Designed to meet OEM specifications, it supports the headlight securely, preventing misalignment and vibration during vehicle operation.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or broken headlight brackets on Ford Escape\u003c\/li\u003e\n\u003cli\u003eCorrects headlight misalignment caused by bracket wear or impact\u003c\/li\u003e\n\u003cli\u003ePrevents headlight vibration and rattling during driving\u003c\/li\u003e\n\u003cli\u003eSupports proper headlight positioning for optimal road illumination\u003c\/li\u003e\n\u003cli\u003eRestores structural integrity to the headlight mounting system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro FO2508103 headlight bracket on your Ford Escape, ensure the mounting points are clean and free of debris. Align the bracket carefully to maintain proper headlight positioning. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Refer to the vehicle’s service manual for torque specifications and detailed installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the FO2508103 headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control to ensure reliable performance. For additional warranty information, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129614005,"sku":"HYNX-FO2508103","price":21.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2508103_Fro.jpg?v=1775593319"},{"product_id":"techpro-fo2508104-headlight-bracket-left","title":"TechPro FO2508104 Headlight Bracket - Left","description":"\u003ch2\u003eReliable Headlight Bracket for Ford Mustang\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2508104 headlight bracket is designed specifically for Ford Mustang models, providing a precise fit and secure mounting for your vehicle's headlight assembly. Engineered to maintain proper alignment, this bracket ensures consistent lighting performance and durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Mustang vehicles\u003c\/li\u003e\n\u003cli\u003eDimensions: 5.85 inches length, 5.07 inches width, 2.73 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.1 lbs for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003ePart number FO2508104 for accurate identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Design Details\u003c\/h2\u003e\u003cp\u003eThe FO2508104 headlight bracket measures 5.85 inches in length, 5.07 inches in width, and 2.73 inches in height, making it a compact yet sturdy component for the Ford Mustang's lighting system. Weighing only 0.1 pounds, this bracket offers a balance of strength and lightweight design, minimizing added weight to the vehicle. Its precise dimensions ensure a secure fit that maintains the headlight's position and alignment, which is critical for optimal road illumination and safety.\u003c\/p\u003e\u003ch2\u003ePurpose and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken headlight brackets on Ford Mustang models\u003c\/li\u003e\n\u003cli\u003eRestores proper headlight alignment and stability\u003c\/li\u003e\n\u003cli\u003ePrevents headlight vibration and movement during driving\u003c\/li\u003e\n\u003cli\u003eSupports headlight assembly after collision repairs\u003c\/li\u003e\n\u003cli\u003eMaintains factory specifications for lighting components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro FO2508104 headlight bracket, ensure the mounting points on the Ford Mustang are clean and free of debris. Align the bracket carefully to maintain headlight positioning and avoid misalignment. Use appropriate tools to secure the bracket firmly without over-tightening, which could damage the component or mounting surfaces. Refer to the vehicle’s service manual for torque specifications and detailed installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the FO2508104 headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control inspections to ensure reliable performance. For additional warranty information, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129646773,"sku":"HYNX-FO2508104","price":39.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2508104_Fro.jpg?v=1775593320"},{"product_id":"techpro-fo2509103-headlight-bracket-right","title":"TechPro FO2509103 Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Ford Escape\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2509103 headlight bracket is designed specifically for Ford Escape models, providing a secure and precise fit. Engineered to maintain proper headlight alignment, this bracket ensures consistent lighting performance and vehicle safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 14.6 inches length, 5.9 inches height, 2.4 inches width\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.34 lbs for easy handling and installation\u003c\/li\u003e\n\u003cli\u003eDurable construction tailored for Ford Escape headlight mounting\u003c\/li\u003e\n\u003cli\u003ePart number FO2509103 for accurate identification and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from TechPro measures 14.6 inches in length, 5.9 inches in height, and 2.4 inches in width, making it a precise fit for the Ford Escape. Weighing only 0.34 pounds, it offers a balance of strength and lightweight design to support the headlight assembly without adding unnecessary bulk. The bracket is engineered to maintain the correct positioning of the headlight, which is critical for optimal beam alignment and road visibility.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis headlight bracket is compatible with Ford Escape models, ensuring a direct fit replacement for the original part. It is ideal for addressing issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLoose or misaligned headlights causing poor illumination\u003c\/li\u003e\n\u003cli\u003eDamaged or broken headlight mounting points\u003c\/li\u003e\n\u003cli\u003eVibration-related headlight instability\u003c\/li\u003e\n\u003cli\u003eCorrosion or wear affecting headlight bracket integrity\u003c\/li\u003e\n\u003cli\u003eRestoration of factory headlight positioning after collision repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro FO2509103 headlight bracket, ensure the mounting surfaces are clean and free of debris. Align the bracket carefully to maintain proper headlight orientation. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Refer to the Ford Escape service manual for torque specifications and detailed installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures this headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control to ensure reliable performance. For additional warranty information, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129712309,"sku":"HYNX-FO2509103","price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2509103_Fro.jpg?v=1775593320"},{"product_id":"techpro-fo2509104-headlight-bracket-right","title":"TechPro FO2509104 Headlight Bracket - Right","description":"\u003ch2\u003eOverview of TechPro FO2509104 Headlight Bracket for Ford Mustang\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2509104 headlight bracket is designed specifically for Ford Mustang models, providing a precise fit and reliable support for your vehicle's headlight assembly. Engineered to maintain proper headlight alignment, this bracket ensures consistent lighting performance and vehicle safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Mustang models\u003c\/li\u003e\n\u003cli\u003eDimensions: 5.85 inches length, 5.07 inches width, 2.73 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.1 lbs for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction to support headlight assembly securely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description and Specifications\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2509104 headlight bracket measures 5.85 inches in length, 5.07 inches in width, and 2.73 inches in height, making it a compact yet sturdy component for the Ford Mustang. Weighing only 0.1 pounds, this bracket offers a balance of strength and lightweight design, which helps maintain the structural integrity of the headlight assembly without adding unnecessary weight. Its precise dimensions ensure a secure fit, reducing the risk of headlight misalignment or vibration during vehicle operation.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or broken headlight brackets on Ford Mustang vehicles\u003c\/li\u003e\n\u003cli\u003eCorrects headlight misalignment caused by worn or bent brackets\u003c\/li\u003e\n\u003cli\u003eSupports headlight assembly to prevent excessive movement or rattling\u003c\/li\u003e\n\u003cli\u003eRestores proper headlight positioning after minor front-end impacts\u003c\/li\u003e\n\u003cli\u003eMaintains headlight stability for improved nighttime visibility and safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro FO2509104 headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is accessible. Carefully remove the damaged bracket and compare it with the replacement to confirm matching dimensions. Align the new bracket according to the original mounting points on the Ford Mustang, and secure it firmly to avoid any movement. It is recommended to check headlight alignment after installation to ensure optimal lighting performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the FO2509104 headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control inspections to ensure reliable performance. For additional warranty information, please refer to TechPro's official documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129745077,"sku":"HYNX-FO2509104","price":39.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2509104_Fro.jpg?v=1775593320"},{"product_id":"techpro-fo2509107-headlight-bracket-right","title":"TechPro FO2509107 Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Ford Explorer\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2509107 headlight bracket is designed specifically for Ford Explorer models, providing a secure and precise fit. Engineered to maintain proper headlight alignment, this bracket ensures consistent lighting performance and vehicle safety.\u003c\/p\u003e\u003ch2\u003eKey Features of the TechPro FO2509107 Headlight Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 16.58 inches in length, 6.63 inches in width, and 3.9 inches in height\u003c\/li\u003e\n\u003cli\u003eWeight: 4 pounds for durable and stable support\u003c\/li\u003e\n\u003cli\u003eConstructed to fit Ford Explorer headlight assemblies accurately\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper headlight positioning and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the FO2509107 Headlight Bracket\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from TechPro is built with precise measurements to match the Ford Explorer's headlight mounting points. With a length of 16.58 inches, width of 6.63 inches, and height of 3.9 inches, it offers a robust structure weighing 4 pounds. The bracket supports the headlight assembly firmly, preventing misalignment caused by vibrations or impacts. Its design ensures that the headlight remains securely mounted, contributing to consistent beam direction and improved nighttime visibility.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of damaged or broken headlight brackets on Ford Explorer vehicles\u003c\/li\u003e\n\u003cli\u003eCorrection of headlight misalignment due to bracket wear or impact\u003c\/li\u003e\n\u003cli\u003eRestoration of headlight stability after collision repairs\u003c\/li\u003e\n\u003cli\u003ePrevention of headlight movement that can affect beam accuracy\u003c\/li\u003e\n\u003cli\u003eSupport for aftermarket or OEM headlight assemblies requiring precise mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro FO2509107 headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is properly supported. Align the bracket carefully with the existing mounting points on the Ford Explorer to avoid stress on the headlight housing. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Verify headlight alignment after installation to confirm proper positioning.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the FO2509107 headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control to ensure reliable performance in Ford Explorer vehicles. For optimal results, use this bracket as a direct replacement part to maintain vehicle safety and lighting effectiveness.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129777845,"sku":"HYNX-FO2509107","price":30.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2509107_Fro.jpg?v=1775593321"},{"product_id":"techpro-fo2602100-fog-light-bracket-left","title":"TechPro FO2602100 Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Ford F-150\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2602100 fog light bracket is designed specifically for Ford F-150 models, providing a secure and precise mounting solution. Engineered to meet exact fitment requirements, this bracket ensures proper alignment and stability for your vehicle's fog lights.\u003c\/p\u003e\u003ch2\u003eKey Features of TechPro FO2602100 Fog Light Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford F-150 models\u003c\/li\u003e\n\u003cli\u003eDimensions: 11.46 inches length, 9.21 inches width, 5.44 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 1 lb for easy handling and installation\u003c\/li\u003e\n\u003cli\u003eDurable construction to maintain fog light positioning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2602100 fog light bracket is crafted to fit the Ford F-150, ensuring a precise and secure fit. Measuring 11.46 inches in length, 9.21 inches in width, and 5.44 inches in height, this bracket offers the necessary support and alignment for your vehicle’s fog lights. Weighing just 1 pound, it is easy to handle during installation without compromising strength or durability. This part is essential for maintaining the correct positioning of fog lights, which is critical for optimal lighting performance and road safety.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken fog light brackets on Ford F-150\u003c\/li\u003e\n\u003cli\u003eCorrects misaligned fog lights to improve visibility in adverse weather\u003c\/li\u003e\n\u003cli\u003ePrevents fog light vibration and movement while driving\u003c\/li\u003e\n\u003cli\u003eSupports fog light assembly for consistent lighting output\u003c\/li\u003e\n\u003cli\u003eRestores factory fitment and appearance of fog light components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro FO2602100 fog light bracket, ensure the vehicle is parked on a level surface and the fog light assembly is properly supported. Align the bracket according to the original mounting points on the Ford F-150 to maintain correct fog light positioning. Use appropriate tools to secure the bracket firmly without over-tightening to avoid damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the FO2602100 fog light bracket to meet industry standards for durability and fitment. While no specific warranty information is provided, TechPro parts are designed to offer reliable performance and long service life when installed correctly on compatible Ford F-150 models.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129908917,"sku":"HYNX-FO2602100","price":27.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2602100_Fro.jpg?v=1775593322"},{"product_id":"techpro-fo2602104-fog-light-bracket-left","title":"TechPro FO2602104 Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Ford Fusion\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2602104 fog light bracket is designed specifically for Ford Fusion models, providing a secure and precise mounting solution. With exact dimensions tailored to fit your vehicle, this bracket ensures proper alignment and stability for your fog lights.\u003c\/p\u003e\u003ch2\u003eKey Features of TechPro FO2602104 Fog Light Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Fusion models\u003c\/li\u003e\n\u003cli\u003eDimensions: 14.24 inches length, 11.7 inches width, 6.63 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 1 lb for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Fog Light Bracket\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2602104 fog light bracket measures 14.24 inches in length, 11.7 inches in width, and 6.63 inches in height, making it an ideal fit for the Ford Fusion. Weighing just 1 pound, this bracket offers a balance of strength and lightweight design, ensuring it holds your fog lights securely without adding unnecessary weight. Its precise dimensions help maintain proper fog light positioning, which is critical for optimal lighting performance and road safety.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or broken fog light brackets on Ford Fusion vehicles\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light alignment and stability\u003c\/li\u003e\n\u003cli\u003ePrevents fog light vibrations and rattling during driving\u003c\/li\u003e\n\u003cli\u003eSupports fog light housing to avoid water ingress and electrical issues\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle lighting standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro FO2602104 fog light bracket, ensure the mounting points on your Ford Fusion are clean and free of debris. Align the bracket carefully according to the vehicle’s original mounting locations to maintain proper fog light orientation. Use appropriate tools to secure the bracket firmly without over-tightening, which could damage the mounting points or bracket.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the FO2602104 fog light bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control to ensure reliable performance on Ford Fusion vehicles.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129941685,"sku":"HYNX-FO2602104","price":24.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2602104_Fro.jpg?v=1775593322"},{"product_id":"techpro-fo2603100-fog-light-bracket-right","title":"TechPro FO2603100 Fog Light Bracket - Right","description":"\u003ch2\u003eReliable Fog Light Bracket for Ford F-150\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2603100 fog light bracket is designed specifically for Ford F-150 models, providing a secure and precise mounting solution. Engineered to meet exact fitment requirements, this bracket ensures proper alignment and stability for your vehicle's fog lights.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford F-150 models\u003c\/li\u003e\n\u003cli\u003eDimensions: 11.46 inches length, 9.21 inches width, 5.44 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 2 lbs for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003ePart number FO2603100 for accurate identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2603100 fog light bracket measures 11.46 inches in length, 9.21 inches in width, and 5.44 inches in height, making it a precise fit for the Ford F-150. Weighing only 2 pounds, this bracket offers a balance of strength and manageable weight, facilitating installation and maintaining vehicle integrity. Its design supports the proper positioning of fog lights, which is critical for optimal lighting performance and safety during adverse weather conditions.\u003c\/p\u003e\u003ch2\u003ePurpose and Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSecures fog lights firmly to the Ford F-150\u003c\/li\u003e\n\u003cli\u003eMaintains correct fog light alignment to improve visibility\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or worn fog light brackets\u003c\/li\u003e\n\u003cli\u003ePrevents fog light vibration and misalignment\u003c\/li\u003e\n\u003cli\u003eSupports aftermarket fog light upgrades on Ford F-150\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro FO2603100 fog light bracket, ensure the mounting points on your Ford F-150 are clean and free of debris. Align the bracket carefully to avoid misplacement of the fog lights. Due to its lightweight design, handling during installation is straightforward, but use appropriate tools to secure the bracket firmly. Verify fog light alignment after installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the FO2603100 fog light bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control to ensure reliable performance on Ford F-150 vehicles. For additional warranty information, consult TechPro or authorized distributors.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129974453,"sku":"HYNX-FO2603100","price":31.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2603100_Fro.jpg?v=1775593322"},{"product_id":"techpro-fo2603104-fog-light-bracket-right","title":"TechPro FO2603104 Fog Light Bracket - Right","description":"\u003ch2\u003eOverview of TechPro Fog Light Bracket FO2603104\u003c\/h2\u003e\u003cp\u003eThe TechPro Fog Light Bracket FO2603104 is designed specifically for Ford Fusion models, providing a reliable mounting solution for your vehicle's fog lights. With precise dimensions and a lightweight design, this bracket ensures proper fitment and stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Fusion models\u003c\/li\u003e\n\u003cli\u003eDimensions: 14.24 inches length, 11.7 inches width, 6.63 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight construction at 1 lb for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable design to support fog light assembly securely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis fog light bracket from TechPro offers a precise fit for Ford Fusion vehicles, ensuring your fog lights are mounted securely and aligned correctly. Measuring 14.24 inches in length, 11.7 inches in width, and 6.63 inches in height, the bracket provides a stable platform that maintains the integrity of your vehicle’s lighting system. Weighing just 1 pound, it is easy to handle during installation without compromising strength or durability. The FO2603104 part number identifies this specific bracket designed to meet the exact specifications required for Ford Fusion fog light assemblies.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken fog light brackets on Ford Fusion models\u003c\/li\u003e\n\u003cli\u003eCorrects misaligned fog lights caused by faulty or worn brackets\u003c\/li\u003e\n\u003cli\u003eProvides a secure mounting point to prevent fog light vibration or movement\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light positioning for improved visibility in adverse weather\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro FO2603104 fog light bracket, ensure the mounting points on the Ford Fusion are clean and free of debris. Align the bracket carefully to maintain proper fog light orientation. Due to its lightweight design, handling during installation is straightforward, but verify all fasteners are tightened to manufacturer specifications to avoid loosening over time.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the FO2603104 fog light bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control to ensure reliable performance on Ford Fusion vehicles. For additional warranty information, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192130007221,"sku":"HYNX-FO2603104","price":26.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2603104_Fro.jpg?v=1775593322"},{"product_id":"techpro-gm2508111-headlight-bracket-left","title":"TechPro GM2508111 Headlight Bracket - Left","description":"\u003ch2\u003eReliable Headlight Bracket for Chevrolet Sonic\u003c\/h2\u003e\u003cp\u003eThe TechPro GM2508111 headlight bracket is designed specifically for Chevrolet Sonic models, providing a precise fit and durable support for your vehicle's headlight assembly. Engineered to maintain proper headlight alignment, this bracket ensures consistent lighting performance and vehicle safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet Sonic models\u003c\/li\u003e\n\u003cli\u003eDimensions: 19.11 inches length, 6.24 inches width, 4.68 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.42 lbs for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction to support headlight assembly securely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe TechPro GM2508111 headlight bracket measures 19.11 inches in length, 6.24 inches in width, and 4.68 inches in height, making it an exact replacement part for the Chevrolet Sonic. Weighing just 0.42 pounds, this bracket offers a balance of strength and lightweight design, which helps maintain the integrity of the headlight mounting without adding unnecessary weight. Its precise dimensions ensure proper alignment and fitment, which is critical for headlight performance and vehicle safety.\u003c\/p\u003e\u003ch2\u003ePurpose and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken headlight brackets on Chevrolet Sonic vehicles\u003c\/li\u003e\n\u003cli\u003eRestores proper headlight alignment and stability\u003c\/li\u003e\n\u003cli\u003ePrevents headlight vibration and misalignment during driving\u003c\/li\u003e\n\u003cli\u003eSupports headlight assembly after collision repairs\u003c\/li\u003e\n\u003cli\u003eMaintains vehicle lighting system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro GM2508111 headlight bracket, ensure the mounting points on the Chevrolet Sonic are clean and free of debris. Align the bracket carefully to avoid misalignment of the headlight assembly. Use appropriate tools to secure the bracket firmly without over-tightening, which could damage the part or mounting surfaces. Refer to the vehicle’s service manual for torque specifications and installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the GM2508111 headlight bracket to meet OEM standards for fit and function. While specific warranty details are not provided, TechPro products typically undergo quality control inspections to ensure durability and reliability. For additional warranty information, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52194100969653,"sku":"HYNX-GM2508111","price":41.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_GM2508111_Fro.jpg?v=1775593536"},{"product_id":"techpro-gm2509111-headlight-bracket-right","title":"TechPro GM2509111 Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Chevrolet Sonic\u003c\/h2\u003e\u003cp\u003eThe TechPro GM2509111 headlight bracket is designed specifically for Chevrolet Sonic models, providing a secure and precise fit. Engineered to maintain proper headlight alignment, this bracket ensures your vehicle's lighting system functions effectively.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 19.11 inches length, 6.24 inches width, 4.68 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.42 lbs for easy handling and installation\u003c\/li\u003e\n\u003cli\u003eDurable construction tailored for Chevrolet Sonic headlight assembly\u003c\/li\u003e\n\u003cli\u003ePart number GM2509111 for accurate identification and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe TechPro GM2509111 headlight bracket measures 19.11 inches in length, 6.24 inches in width, and 4.68 inches in height, making it an ideal replacement part for the Chevrolet Sonic. Weighing just 0.42 pounds, this bracket offers a balance of strength and lightweight design, which helps maintain the integrity of the headlight assembly without adding unnecessary weight. This part is engineered to provide a secure mounting point for the headlight, ensuring proper alignment and stability during vehicle operation.\u003c\/p\u003e\u003ch2\u003eCompatible Chevrolet Sonic Headlight Bracket Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or worn headlight brackets on Chevrolet Sonic models\u003c\/li\u003e\n\u003cli\u003eResolves headlight misalignment issues caused by bracket failure\u003c\/li\u003e\n\u003cli\u003eAddresses rattling or loose headlights due to broken mounting points\u003c\/li\u003e\n\u003cli\u003eSupports restoration of proper headlight positioning after collision repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro GM2509111 headlight bracket, ensure the mounting surfaces are clean and free of debris. Align the bracket carefully with the headlight assembly and vehicle frame to maintain correct headlight aim. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Refer to the Chevrolet Sonic service manual for torque specifications and detailed installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the GM2509111 headlight bracket to meet OEM standards for fit and function on Chevrolet Sonic vehicles. While specific warranty details are not provided, TechPro parts typically undergo quality control inspections to ensure durability and reliability in automotive applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52194101428405,"sku":"HYNX-GM2509111","price":39.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_GM2509111_Fro.jpg?v=1775593536"},{"product_id":"techpro-ho2509106-headlight-bracket-right","title":"TechPro HO2509106 Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Honda Accord\u003c\/h2\u003e\u003cp\u003eThe TechPro HO2509106 headlight bracket is designed specifically for Honda Accord models, providing a secure and precise fit. With its durable construction and exact dimensions, this bracket ensures proper headlight alignment and stability.\u003c\/p\u003e\u003ch2\u003eKey Features of the TechPro HO2509106 Headlight Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 13.5 inches length, 6 inches width, and 4 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 1 pound for easy handling\u003c\/li\u003e\n\u003cli\u003eEngineered for Honda Accord compatibility\u003c\/li\u003e\n\u003cli\u003eConstructed to maintain headlight positioning and reduce vibration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from TechPro is crafted to meet the specific requirements of Honda Accord vehicles. Measuring 13.5 inches in length, 6 inches in width, and 4 inches in height, it offers a precise fit that supports the headlight assembly securely. Weighing just 1 pound, the bracket balances strength and ease of installation. The part number HO2509106 identifies this component within TechPro's range, ensuring you receive the correct bracket for your Accord. Its robust design helps maintain headlight alignment, which is critical for safe nighttime driving and compliance with vehicle standards.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of damaged or broken headlight brackets on Honda Accord models\u003c\/li\u003e\n\u003cli\u003eCorrection of misaligned headlights due to bracket wear or impact\u003c\/li\u003e\n\u003cli\u003eRestoration of headlight stability to prevent vibration and rattling\u003c\/li\u003e\n\u003cli\u003eSupport for headlight assembly after collision repairs\u003c\/li\u003e\n\u003cli\u003eEnsuring proper headlight positioning for optimal road illumination\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro HO2509106 headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is properly supported. Align the bracket according to the factory mounting points on the Honda Accord. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Verify headlight alignment after installation to confirm correct positioning.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the HO2509106 headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality checks to ensure reliable performance on Honda Accord vehicles. For additional warranty information, refer to TechPro's official documentation or contact authorized distributors.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52194225520821,"sku":"HYNX-HO2509106","price":24.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_HO2509106_Fro.jpg?v=1775593625"},{"product_id":"techpro-ho2603101-fog-light-bracket-right","title":"TechPro HO2603101 Fog Light Bracket - Right","description":"\u003ch2\u003eReliable Fog Light Bracket for Honda Civic\u003c\/h2\u003e\u003cp\u003eThe TechPro HO2603101 fog light bracket is designed specifically for Honda Civic models, providing a secure and precise mounting solution. Engineered to meet exact fitment requirements, this bracket ensures proper alignment and stability for your vehicle's fog lights.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Civic models\u003c\/li\u003e\n\u003cli\u003eDimensions: 18.33 inches length, 5.46 inches width, 4.29 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 1 lb for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis fog light bracket from TechPro measures 18.33 inches in length, 5.46 inches in width, and 4.29 inches in height, making it an ideal fit for the Honda Civic's lighting assembly. Weighing just 1 pound, it offers a balance of strength and lightweight design, which helps maintain vehicle efficiency without compromising durability. The bracket is crafted to provide a stable mounting point, reducing vibrations and ensuring consistent fog light positioning.\u003c\/p\u003e\u003ch2\u003ePurpose and Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSecures fog lights firmly to the Honda Civic body\u003c\/li\u003e\n\u003cli\u003ePrevents misalignment and movement of fog lights during driving\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or worn-out fog light brackets\u003c\/li\u003e\n\u003cli\u003eSupports proper fog light function for improved visibility in adverse weather\u003c\/li\u003e\n\u003cli\u003eMaintains factory fit and finish for Honda Civic lighting components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro HO2603101 fog light bracket, ensure the mounting points on your Honda Civic are clean and free of debris. Align the bracket carefully to avoid stress on the fog light assembly. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Refer to your vehicle’s service manual for specific torque specifications and installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures this fog light bracket to meet industry standards for fit and durability. While no specific warranty information is provided, TechPro products typically undergo quality control checks to ensure reliable performance. For additional warranty details, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52194225553589,"sku":"HYNX-HO2603101","price":23.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_HO2603101_Fro.jpg?v=1775593625"},{"product_id":"techpro-in2508100-headlight-bracket-left","title":"TechPro IN2508100 Headlight Bracket - Left","description":"\u003ch2\u003eReliable Headlight Bracket for Infiniti G25, G35, and G37\u003c\/h2\u003e\u003cp\u003eThe TechPro IN2508100 headlight bracket is designed specifically for Infiniti G25, G35, and G37 models. This replacement part ensures proper alignment and secure mounting of your vehicle's headlight assembly, maintaining optimal lighting performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Infiniti G25, G35, and G37 models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003ePrecise fitment with OEM specifications\u003c\/li\u003e\n\u003cli\u003ePart number IN2508100 for easy identification\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining headlight alignment and stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe TechPro IN2508100 headlight bracket is engineered to meet the exact requirements of Infiniti G25, G35, and G37 vehicles. This bracket provides a secure mounting point for the headlight assembly, preventing misalignment and vibration that can affect lighting performance. Manufactured with durable materials, it withstands road conditions and environmental factors to maintain the integrity of your vehicle’s lighting system. Using the correct bracket like the IN2508100 helps ensure your headlights remain properly positioned for safe driving.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or broken headlight brackets on Infiniti G25, G35, and G37\u003c\/li\u003e\n\u003cli\u003eCorrects headlight misalignment issues caused by worn or bent brackets\u003c\/li\u003e\n\u003cli\u003ePrevents headlight vibration and rattling during vehicle operation\u003c\/li\u003e\n\u003cli\u003eRestores secure mounting after collision repairs or part removal\u003c\/li\u003e\n\u003cli\u003eMaintains proper headlight positioning for optimal road illumination\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro IN2508100 headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is properly supported. Align the bracket carefully to the mounting points on the Infiniti G25, G35, or G37 to avoid misalignment. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Refer to the vehicle’s service manual for torque specifications and detailed installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the IN2508100 headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control to ensure reliable performance. Using this bracket helps maintain the structural integrity of your Infiniti G25, G35, or G37 headlight assembly, contributing to vehicle safety and compliance.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52196233478325,"sku":"HYNX-IN2508100","price":49.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_IN2508100_Fro.jpg?v=1775593708"},{"product_id":"techpro-in2509100-headlight-bracket-right","title":"TechPro IN2509100 Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Infiniti G25, G35, and G37\u003c\/h2\u003e\u003cp\u003eThe TechPro IN2509100 headlight bracket is designed specifically for Infiniti G25, G35, and G37 models. This replacement part ensures proper alignment and secure mounting of your vehicle's headlight assembly, maintaining optimal lighting performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Infiniti G25, G35, and G37 models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003ePrecise fitment to maintain headlight alignment\u003c\/li\u003e\n\u003cli\u003eOEM-quality replacement part number IN2509100\u003c\/li\u003e\n\u003cli\u003eDesigned for electrical, lighting, and body applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe TechPro IN2509100 headlight bracket is engineered to meet the exact specifications required for Infiniti G25, G35, and G37 vehicles. This bracket plays a critical role in securing the headlight assembly to the vehicle’s body, ensuring that the headlights remain properly positioned during normal driving conditions. Manufactured with durable materials, this bracket withstands vibrations and impacts that can otherwise cause misalignment or damage to the headlight unit.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for broken or cracked headlight brackets\u003c\/li\u003e\n\u003cli\u003eCorrects headlight misalignment issues\u003c\/li\u003e\n\u003cli\u003ePrevents headlight assembly movement or rattling\u003c\/li\u003e\n\u003cli\u003eRestores proper headlight mounting after collision repairs\u003c\/li\u003e\n\u003cli\u003eSupports electrical and lighting system stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro IN2509100 headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is properly supported. Align the bracket carefully to the mounting points on the Infiniti G25, G35, or G37 to avoid stress on the headlight housing. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Refer to the vehicle’s service manual for torque specifications and detailed installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the IN2509100 headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro parts typically undergo quality control inspections to ensure reliable performance. Using this bracket helps maintain the integrity of your Infiniti G25, G35, or G37’s lighting system and supports safe driving conditions.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52196233511093,"sku":"HYNX-IN2509100","price":56.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_IN2509100_Fro.jpg?v=1775593708"},{"product_id":"techpro-lx2602106-fog-light-bracket-left","title":"TechPro LX2602106 Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Lexus RX350 and RX450h\u003c\/h2\u003e\u003cp\u003eThe TechPro LX2602106 fog light bracket is designed to provide secure mounting for fog lights on Lexus RX350, RX350L, and RX450h models. Engineered with precise dimensions, this bracket ensures a proper fit and stable support for your vehicle's lighting system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus RX350, RX350L, and RX450h models\u003c\/li\u003e\n\u003cli\u003eDimensions: 12.87 inches length, 9.36 inches width, 3.9 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 1 lb for easy handling and installation\u003c\/li\u003e\n\u003cli\u003eDurable construction to maintain fog light positioning\u003c\/li\u003e\n\u003cli\u003ePart number LX2602106 for accurate identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Design Details\u003c\/h2\u003e\u003cp\u003eThe TechPro LX2602106 fog light bracket measures 12.87 inches in length, 9.36 inches in width, and 3.9 inches in height, providing a precise fit for the fog light assembly on compatible Lexus vehicles. Weighing just 1 pound, this bracket offers a balance of strength and lightweight design, minimizing added weight to the vehicle while maintaining structural integrity. The bracket is engineered to hold fog lights securely in place, reducing vibration and potential misalignment during driving conditions.\u003c\/p\u003e\u003ch2\u003ePurpose and Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSecures fog lights to the front assembly of Lexus RX350, RX350L, and RX450h\u003c\/li\u003e\n\u003cli\u003ePrevents fog light misalignment caused by road vibrations or impacts\u003c\/li\u003e\n\u003cli\u003eSupports proper fog light positioning for optimal illumination\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or worn fog light brackets to restore lighting stability\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle lighting specifications for safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro LX2602106 fog light bracket, ensure the bracket aligns with the existing mounting points on the Lexus RX350, RX350L, or RX450h. Verify that the fog light assembly fits securely within the bracket dimensions of 12.87 inches length, 9.36 inches width, and 3.9 inches height. Use appropriate tools to tighten mounting hardware without over-torquing to avoid damage. Inspect the fog light alignment after installation to confirm proper positioning and function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the LX2602106 fog light bracket to meet industry standards for durability and fitment accuracy. While specific warranty details are not provided, TechPro products typically undergo quality control to ensure reliable performance on Lexus RX350, RX350L, and RX450h vehicles. For further warranty information, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52196244848821,"sku":"HYNX-LX2602106","price":32.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_LX2602106_Fro.jpg?v=1775593771"},{"product_id":"techpro-ni2509103-headlight-bracket-right","title":"TechPro NI2509103 Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Nissan Frontier and Pathfinder\u003c\/h2\u003e\u003cp\u003eThe TechPro NI2509103 headlight bracket is designed to provide secure mounting for your Nissan Frontier or Pathfinder headlights. With precise dimensions and lightweight construction, this bracket ensures proper alignment and stability for your vehicle's lighting system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan Frontier and Nissan Pathfinder models\u003c\/li\u003e\n\u003cli\u003eDimensions: 7.5 inches length, 6.7 inches height, 3.5 inches width\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.1 lbs for easy handling and installation\u003c\/li\u003e\n\u003cli\u003eDurable construction to maintain headlight positioning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Product Details\u003c\/h2\u003e\u003cp\u003eThe TechPro NI2509103 headlight bracket measures 7.5 inches in length, 6.7 inches in height, and 3.5 inches in width, making it a precise fit for the headlight assembly of Nissan Frontier and Pathfinder vehicles. Weighing only 0.1 pounds, this bracket offers a balance of strength and lightweight design, which helps maintain the integrity of your vehicle’s lighting system without adding unnecessary bulk. The bracket is engineered to hold the headlight securely in place, preventing misalignment caused by vibrations or minor impacts.\u003c\/p\u003e\u003ch2\u003ePurpose and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken headlight brackets on Nissan Frontier and Pathfinder\u003c\/li\u003e\n\u003cli\u003eRestores proper headlight alignment and stability\u003c\/li\u003e\n\u003cli\u003ePrevents headlight movement that can cause uneven lighting or damage\u003c\/li\u003e\n\u003cli\u003eSupports headlight assembly after minor collisions or wear\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle lighting safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro NI2509103 headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is accessible. Carefully remove the damaged bracket and align the new bracket according to the original mounting points. The lightweight design facilitates handling during installation, but verify all fasteners are securely tightened to prevent movement. Consult your vehicle’s service manual for torque specifications and detailed installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the NI2509103 headlight bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control to ensure reliable performance on Nissan Frontier and Pathfinder vehicles. For additional warranty information, refer to TechPro’s official documentation or contact authorized distributors.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52198134481077,"sku":"HYNX-NI2509103","price":21.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2509103_Fro.jpg?v=1775593963"},{"product_id":"techpro-ni2602101-fog-light-bracket-left","title":"TechPro NI2602101 Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Nissan Sentra\u003c\/h2\u003e\u003cp\u003eThe TechPro NI2602101 fog light bracket is designed specifically for Nissan Sentra models, providing a secure and precise mounting solution. Engineered to maintain proper fog light alignment, this bracket ensures consistent lighting performance under various driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan Sentra vehicles\u003c\/li\u003e\n\u003cli\u003eDimensions: 12.48 inches length, 7.02 inches width, 5.46 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.35 lbs for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003ePart number NI2602101 for accurate identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis fog light bracket from TechPro measures 12.48 inches in length, 7.02 inches in width, and 5.46 inches in height, making it an ideal fit for the Nissan Sentra. Weighing only 0.35 pounds, the bracket offers a balance of strength and lightweight design, which helps maintain the vehicle's original handling characteristics. The bracket is engineered to hold the fog light securely in place, preventing misalignment or vibration that can affect lighting performance.\u003c\/p\u003e\u003ch2\u003ePurpose and Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken fog light brackets on Nissan Sentra models\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light alignment for improved visibility\u003c\/li\u003e\n\u003cli\u003ePrevents fog light movement caused by road vibrations\u003c\/li\u003e\n\u003cli\u003eSupports fog light assembly to maintain vehicle safety standards\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with original equipment mounting specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro NI2602101 fog light bracket, ensure the mounting points on the Nissan Sentra are clean and free of debris. Align the bracket carefully to avoid misalignment of the fog light assembly. Use appropriate tools to secure the bracket firmly without over-tightening, which could damage the mounting points. Refer to the vehicle’s service manual for torque specifications and installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures this fog light bracket to meet industry standards for durability and fitment. While no specific warranty information is provided, TechPro products typically undergo quality control checks to ensure reliable performance. Using the correct part number NI2602101 guarantees compatibility with Nissan Sentra models, supporting consistent vehicle maintenance and repair.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52198134710453,"sku":"HYNX-NI2602101","price":23.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602101_Fro.jpg?v=1775593963"},{"product_id":"techpro-su2602100-fog-light-bracket-left","title":"TechPro SU2602100 Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Subaru XV Crosstrek\u003c\/h2\u003e\u003cp\u003eThe TechPro SU2602100 fog light bracket is designed specifically for the Subaru XV Crosstrek, providing a secure and precise mounting solution. Engineered to maintain proper fog light alignment, this bracket ensures consistent lighting performance under various driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Subaru XV Crosstrek models\u003c\/li\u003e\n\u003cli\u003eDimensions: 7.8 inches length, 5.46 inches width, 3.51 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.4 lbs for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003ePart number SU2602100 for accurate identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe TechPro SU2602100 fog light bracket measures 7.8 inches in length, 5.46 inches in width, and 3.51 inches in height, making it a precise fit for the Subaru XV Crosstrek. Weighing only 0.4 pounds, this bracket offers a balance of strength and lightweight design, minimizing added weight to the vehicle's front assembly. Its dimensions ensure proper positioning and stability of the fog light assembly, which is critical for maintaining optimal beam direction and road visibility.\u003c\/p\u003e\u003ch2\u003ePurpose and Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSecures fog light assemblies to the vehicle body\u003c\/li\u003e\n\u003cli\u003ePrevents fog light misalignment caused by vibrations or impacts\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or worn fog light brackets on Subaru XV Crosstrek\u003c\/li\u003e\n\u003cli\u003eSupports consistent fog light performance in adverse weather conditions\u003c\/li\u003e\n\u003cli\u003eMaintains proper fog light positioning for safety and compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro SU2602100 fog light bracket, ensure the mounting points on the Subaru XV Crosstrek are clean and free of debris. Align the bracket carefully to avoid misalignment of the fog light assembly. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Refer to the vehicle’s service manual for torque specifications and installation procedures specific to the fog light assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the SU2602100 fog light bracket to meet industry standards for durability and fitment accuracy. While no specific warranty information is provided, TechPro products are generally designed to offer reliable performance and long service life when installed correctly. For additional warranty details, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52198147326133,"sku":"HYNX-SU2602100","price":20.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_SU2602100_FRO.jpg?v=1775594002"},{"product_id":"techpro-to2602102-fog-light-bracket-left","title":"TechPro TO2602102 Fog Light Bracket - Left","description":"\u003ch2\u003eReliable Fog Light Bracket for Toyota Sequoia\u003c\/h2\u003e\u003cp\u003eThe TechPro TO2602102 fog light bracket is designed specifically for Toyota Sequoia models, providing a secure and precise mounting solution. Engineered to maintain proper fog light alignment, this bracket ensures consistent lighting performance under various driving conditions.\u003c\/p\u003e\u003ch2\u003eKey Features of TechPro TO2602102 Fog Light Bracket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 7.8 inches length, 4.7 inches width, and 4.7 inches height for accurate fitment\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.31 lbs to reduce added weight on the vehicle\u003c\/li\u003e\n\u003cli\u003eDurable construction tailored for Toyota Sequoia fog light assemblies\u003c\/li\u003e\n\u003cli\u003ePart number TO2602102 ensures compatibility and easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Fog Light Bracket\u003c\/h2\u003e\u003cp\u003eThis fog light bracket from TechPro is crafted to meet the exact specifications required for Toyota Sequoia vehicles. With a length of 7.8 inches and a balanced width and height of 4.7 inches each, it provides a stable mounting platform that maintains fog light positioning. Weighing just 0.31 pounds, the bracket offers strength without unnecessary bulk, contributing to overall vehicle efficiency. The part number TO2602102 corresponds to this specific bracket, ensuring that it matches the original equipment manufacturer (OEM) standards for fit and function.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or corroded fog light brackets on Toyota Sequoia\u003c\/li\u003e\n\u003cli\u003eRestores proper fog light alignment to improve visibility in adverse weather\u003c\/li\u003e\n\u003cli\u003ePrevents fog light vibration and movement caused by worn mounting points\u003c\/li\u003e\n\u003cli\u003eSupports fog light assembly stability after minor front-end impacts\u003c\/li\u003e\n\u003cli\u003eEnsures secure attachment to maintain electrical and lighting system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro TO2602102 fog light bracket, verify the bracket dimensions against the existing mounting points on your Toyota Sequoia. Proper alignment is critical to maintain fog light beam direction and avoid misalignment. Use appropriate tools to secure the bracket firmly without over-tightening, which could damage the mounting hardware or bracket. Consult the vehicle’s service manual for torque specifications and installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the TO2602102 fog light bracket to meet industry standards for durability and fitment. While specific warranty details are not provided, TechPro products typically undergo quality control inspections to ensure reliable performance. For additional warranty information, refer to TechPro’s official documentation or contact authorized distributors.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52203134484661,"sku":"HYNX-TO2602102","price":34.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_TO2602102_Fro.jpg?v=1775594191"},{"product_id":"techpro-vw2508102-headlight-bracket-left","title":"TechPro VW2508102 Headlight Bracket - Left","description":"\u003ch2\u003eOverview of TechPro VW2508102 Headlight Bracket\u003c\/h2\u003e\u003cp\u003eThe TechPro VW2508102 headlight bracket is designed specifically for Volkswagen Beetle models, providing a reliable mounting solution for your vehicle's headlight assembly. Engineered to precise dimensions, this bracket ensures proper alignment and secure fitment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volkswagen Beetle models\u003c\/li\u003e\n\u003cli\u003eDimensions: 14.43 inches length, 11.9 inches width, 5.07 inches height\u003c\/li\u003e\n\u003cli\u003eLightweight design at 1 lb for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction for stable headlight support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from TechPro is crafted to meet the exact specifications required for Volkswagen Beetle vehicles. Measuring 14.43 inches in length, 11.9 inches in width, and 5.07 inches in height, it offers a precise fit that maintains the integrity of the headlight assembly. Weighing just 1 pound, the bracket is easy to handle during installation without compromising strength or durability. The bracket’s design supports the headlight securely, helping to prevent misalignment or vibration that can affect lighting performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken headlight brackets on Volkswagen Beetle models\u003c\/li\u003e\n\u003cli\u003eCorrects headlight misalignment issues caused by worn or bent brackets\u003c\/li\u003e\n\u003cli\u003eProvides stable mounting to reduce headlight vibration while driving\u003c\/li\u003e\n\u003cli\u003eRestores proper headlight positioning after minor front-end impacts\u003c\/li\u003e\n\u003cli\u003eSupports headlight assembly for improved lighting consistency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro VW2508102 headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is removed carefully to avoid damage. Align the bracket according to the original mounting points on the Volkswagen Beetle. Use appropriate tools to secure the bracket firmly, checking for proper headlight alignment before finalizing installation. Refer to the vehicle’s service manual for torque specifications and detailed installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures the VW2508102 headlight bracket to meet industry standards for fit and durability. While specific warranty details are not provided, TechPro products typically undergo quality control inspections to ensure reliable performance. For additional warranty information, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52203141857461,"sku":"HYNX-VW2508102","price":69.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_VW2508102_Fro.jpg?v=1775594244"},{"product_id":"techpro-ho2508106-headlight-bracket-left","title":"TechPro HO2508106 Headlight Bracket - Left","description":"\u003ch2\u003eOverview of TechPro Headlight Bracket HO2508106\u003c\/h2\u003e\u003cp\u003eThe TechPro Headlight Bracket HO2508106 is designed specifically for Honda Accord models, providing a reliable mounting solution for your vehicle's headlight assembly. With precise dimensions and lightweight construction, this bracket ensures proper alignment and secure fitment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Accord models\u003c\/li\u003e\n\u003cli\u003eDimensions: 5.3 inches length, 3.9 inches height, 3.1 inches width\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.1 lbs for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable construction for stable headlight support\u003c\/li\u003e\n\u003cli\u003ePart number HO2508106 for accurate identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis headlight bracket from TechPro measures 5.3 inches in length, 3.9 inches in height, and 3.1 inches in width, making it a precise fit for the Honda Accord. Weighing only 0.1 pounds, it offers a balance of strength and lightweight design, which helps maintain the integrity of the headlight assembly without adding unnecessary bulk. The bracket is engineered to hold the headlight securely in place, preventing misalignment and vibration during vehicle operation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces damaged or broken headlight brackets on Honda Accord vehicles\u003c\/li\u003e\n\u003cli\u003eCorrects headlight misalignment issues caused by worn or bent brackets\u003c\/li\u003e\n\u003cli\u003eProvides stable support to prevent headlight vibration and movement\u003c\/li\u003e\n\u003cli\u003eRestores proper headlight positioning for optimal road illumination\u003c\/li\u003e\n\u003cli\u003eSupports headlight assembly after minor collision repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the TechPro HO2508106 headlight bracket, ensure the mounting points on the Honda Accord are clean and free of debris. Align the bracket carefully to maintain proper headlight positioning. Use appropriate tools to secure the bracket firmly without over-tightening, which could cause damage. Refer to the vehicle’s service manual for torque specifications and installation procedures specific to the Honda Accord.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eTechPro manufactures this headlight bracket to meet OEM standards for fit and function on Honda Accord models. While specific warranty details are not provided, TechPro products typically undergo quality control inspections to ensure durability and performance. For additional warranty information, consult the product documentation or contact the manufacturer directly.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52207605088437,"sku":"HYNX-HO2508106","price":27.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_HO2508106_Fro.jpg?v=1775593625"},{"product_id":"depo-32-a34-1103r1ud-headlight-bracket-right","title":"Depo 32-A34-1103R1UD Headlight Bracket - Right","description":"\u003ch2\u003eReliable Headlight Bracket for Ram 1500\u003c\/h2\u003e\u003cp\u003eThe Depo 32-A34-1103R1UD headlight bracket is designed specifically for Ram 1500 models, providing a secure and precise fit. This replacement part ensures your vehicle's headlight assembly remains properly aligned and stable.\u003c\/p\u003e\u003ch2\u003eKey Features of Depo Headlight Bracket 32-A34-1103R1UD\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ram 1500 models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting support\u003c\/li\u003e\n\u003cli\u003eExact fitment to maintain headlight alignment\u003c\/li\u003e\n\u003cli\u003eOEM-quality replacement part\u003c\/li\u003e\n\u003cli\u003ePart number 32-A34-1103R1UD for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Depo headlight bracket 32-A34-1103R1UD is engineered to meet the specifications of Ram 1500 trucks, ensuring a proper fit and reliable performance. This bracket supports the headlight assembly, preventing movement or misalignment caused by road vibrations or minor impacts. Manufactured with durable materials, it maintains the structural integrity of the lighting system and helps preserve the vehicle's original appearance. Using the correct bracket like the 32-A34-1103R1UD is essential for maintaining headlight functionality and safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of broken or cracked headlight brackets on Ram 1500\u003c\/li\u003e\n\u003cli\u003eCorrecting misaligned headlights due to damaged mounting points\u003c\/li\u003e\n\u003cli\u003eRestoring headlight stability after minor collisions\u003c\/li\u003e\n\u003cli\u003ePreventing headlight assembly rattling or movement\u003c\/li\u003e\n\u003cli\u003eMaintaining proper headlight beam direction for safe driving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Depo 32-A34-1103R1UD headlight bracket, ensure the vehicle is parked on a level surface and the headlight assembly is carefully removed to avoid damage. Align the bracket precisely with the mounting points on the Ram 1500 to guarantee a secure fit. Use appropriate tools to tighten fasteners without over-torquing, which could cause damage. Refer to the vehicle’s service manual for detailed instructions specific to the Ram 1500 model year.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDepo manufactures the 32-A34-1103R1UD headlight bracket to meet industry standards for fit and durability. While specific warranty details are not provided, Depo parts typically undergo quality control processes to ensure reliable performance. Using this bracket helps maintain the safety and functionality of your Ram 1500’s lighting system.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":52231096991925,"sku":"DGKS-32-A34-1103R1UD","price":73.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_32A341103R1UD_Fro.jpg?v=1775666299"},{"product_id":"techpro-ni2508100-headlight-bracket-left","title":"TechPro NI2508100 Headlight Bracket - Left","description":"\u003ch2\u003eTechPro Headlight Bracket for Nissan Versa\u003c\/h2\u003e\u003cp\u003eRestore secure headlight mounting with this TechPro headlight bracket, part number NI2508100. It is engineered for sedan models and built for factory-style precision, making it a direct-fit solution for 2015-2017 Nissan Versa left lower applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2015-2017 Nissan Versa, left lower headlight mounting position\u003c\/li\u003e\n\u003cli\u003eFactory-style fitment supports accurate alignment during replacement\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eDesigned for reliable compatibility on sedan models\u003c\/li\u003e\n\u003cli\u003eTechPro NI2508100 supports long-term value in body repair work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe TechPro NI2508100 headlight bracket is a replacement body component for the left lower headlight mounting area on 2015-2017 Nissan Versa sedan models. It helps secure the headlamp assembly in the correct position so the front end can be reassembled with proper alignment and stable support. If you are replacing a damaged bracket after collision repair or addressing broken mounting points, this part provides a direct-fit option for the Nissan Versa.\u003c\/p\u003e\u003cp\u003eThis part cross-references OEM number 260929KK0A for the same application. TechPro NI2508100 is intended for repair jobs where accurate fit and dependable mounting matter, especially when working on a Nissan Versa left-side headlight assembly.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front-end damage\u003c\/li\u003e\n\u003cli\u003eMissing support at the left lower headlight area\u003c\/li\u003e\n\u003cli\u003eImproper headlight positioning during body repair\u003c\/li\u003e\n\u003cli\u003eRestoring secure attachment on a 2015-2017 Nissan Versa\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, make, model, and left lower mounting location before installation. Compare the existing bracket and mounting points to the OEM reference 260929KK0A to confirm correct application. Test-fit the headlight assembly before final reassembly to ensure proper alignment on the Nissan Versa.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with durable materials and factory-style precision to support consistent fitment and dependable performance in body repair applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692511925,"sku":"HYNX-NI2508100","price":26.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2508100_Fro.jpg?v=1781716056"},{"product_id":"techpro-ni2508101-headlight-bracket-left","title":"TechPro NI2508101 Headlight Bracket - Left","description":"\u003ch2\u003eHeadlight Bracket for Nissan Frontier, Xterra, and Pathfinder\u003c\/h2\u003e\u003cp\u003eRestore secure headlamp mounting with this TechPro headlight bracket, part number NI2508101. Built for the left upper position, it matches the OE application used on select Nissan Frontier, Xterra, and Pathfinder models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTechPro headlight bracket for the left upper headlamp mounting point\u003c\/li\u003e\n\u003cli\u003eDimensions: 2.4 in. height, 3.9 in. length, 2.4 in. width\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.09 lbs for direct replacement use\u003c\/li\u003e\n\u003cli\u003eCross-reference part number: 26092EA000\u003c\/li\u003e\n\u003cli\u003ePart number NI2508101 for fitment verification and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2005-2021 Nissan Frontier, left upper.\u003c\/li\u003e\n\u003cli\u003eFits 2005-2015 Nissan Xterra, left upper.\u003c\/li\u003e\n\u003cli\u003eFits 2005-2012 Nissan Pathfinder, left upper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eTechPro NI2508101 is a headlight bracket engineered for the left upper mounting location on select Nissan vehicles. Its compact 2.4 x 3.9 x 2.4 inch profile supports proper headlamp alignment and secure attachment in applications where the original bracket has cracked, bent, or deteriorated. Use NI2508101 when replacing the OE-style bracket referenced by 26092EA000 on Nissan Frontier, Nissan Xterra, and Nissan Pathfinder models.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or missing left upper headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp assembly caused by damaged support points\u003c\/li\u003e\n\u003cli\u003eMisaligned headlight housing after front-end repair\u003c\/li\u003e\n\u003cli\u003eReplacement for OE bracket 26092EA000 on listed Nissan applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, model, and left upper mounting position before installation. Compare the original bracket to NI2508101 to confirm shape, mounting points, and dimensions. Inspect surrounding headlamp tabs and support structure for damage before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro NI2508101 is cataloged as a direct-fit replacement headlight bracket for the specified Nissan applications. Confirm fitment against the OE reference 26092EA000 and the vehicle’s existing mounting location before installation.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692544693,"sku":"HYNX-NI2508101","price":20.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2508101_FRO.jpg?v=1781716063"},{"product_id":"techpro-ni2602102-fog-light-bracket-left","title":"TechPro NI2602102 Fog Light Bracket - Left","description":"\u003ch2\u003eFog Light Bracket for Nissan Rogue\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket is built for a factory-style fit on the left side of the vehicle. It is made for 2017-2020 Nissan Rogue applications with Japan Built\/Korea Built notes, and it supports reliable fog light mounting with durable construction and consistent alignment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2017-2020 Nissan Rogue, left\u003c\/li\u003e\n\u003cli\u003eOE-style replacement for Nissan Rogue fog light mounting\u003c\/li\u003e\n\u003cli\u003eFactory-style precision for proper bracket alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003ePart number NI2602102 for direct reference and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eTechPro NI2602102 is a left fog light bracket for the Nissan Rogue, engineered to match factory-style mounting requirements. With dimensions of 3.51 inches high, 10.34 inches long, and 3.9 inches wide, this bracket is sized for a precise fit in the front lighting assembly. It is a practical replacement for vehicles needing a stable fog lamp support on the left side, and it cross-references OEM part number 269156FP0A for the same application. Use NI2602102 when you need a replacement fog light bracket for a 2017-2020 Nissan Rogue, left side, with Japan Built\/Korea Built notes.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light bracket mounting points\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp alignment on the left side\u003c\/li\u003e\n\u003cli\u003eImproper fit after front-end repair work\u003c\/li\u003e\n\u003cli\u003eMissing or damaged OE-style support for the fog light assembly\u003c\/li\u003e\n\u003cli\u003eRestoring secure attachment on a Nissan Rogue fog light bracket replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle is a 2017-2020 Nissan Rogue with Japan Built\/Korea Built fitment before ordering. Verify left-side placement and compare the existing bracket to NI2602102 and OEM reference 269156FP0A before installation. Check surrounding lighting components and mounting points for damage so the replacement bracket seats correctly and supports proper fog light positioning.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this fog light bracket with high-quality materials and factory-style precision to support durable, long-term performance. The part is intended as a direct replacement for the specified Nissan Rogue application and is referenced to OEM part number 269156FP0A.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692675765,"sku":"HYNX-NI2602102","price":30.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602102_FRO.jpg?v=1781716091"},{"product_id":"techpro-ni2602104-fog-light-bracket-left","title":"TechPro NI2602104 Fog Light Bracket - Left","description":"\u003ch2\u003eFog Light Bracket for Nissan Juke\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket is built for factory-style precision and reliable long-term function. It is a direct-fit replacement for the left side on select Nissan Juke models, with dimensions and construction focused on consistent mounting and durability.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fitment for accurate alignment\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality materials for durability\u003c\/li\u003e\n\u003cli\u003eSupports dependable fog light mounting and stable positioning\u003c\/li\u003e\n\u003cli\u003eCompact design with a 5.5 in. height, 7.8 in. length, and 5.5 in. width\u003c\/li\u003e\n\u003cli\u003eLightweight construction at 0.5 lb for straightforward handling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eTechPro NI2602104 is a left fog light bracket made for 2011-2014 Nissan Juke applications. It cross-references Nissan 269151KA0A for the same application. For buyers searching for a 2011 Nissan Juke left fog light bracket, a 2014 Nissan Juke fog light bracket, or TechPro NI2602104 replacement fitment, this part provides an OE-style mounting solution that helps restore proper lamp support and alignment.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or damaged left fog light mounting points\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned fog lamp positioning\u003c\/li\u003e\n\u003cli\u003eReplacement needs after front-end repair\u003c\/li\u003e\n\u003cli\u003eFitment issues caused by worn or missing bracket hardware locations\u003c\/li\u003e\n\u003cli\u003eRestoring proper support for the fog light assembly on a Nissan Juke\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall on the left side only and verify the vehicle matches the listed 2011-2014 Nissan Juke fitment before ordering. Compare the original bracket to the replacement part and confirm OEM reference 269151KA0A for application matching. Professional installation is recommended when front fascia components or lamp assemblies require removal for access.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with high-quality materials and factory-style precision to support durable, consistent performance. The part is engineered for reliable function and long-term value in OE-style replacement use.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692708533,"sku":"HYNX-NI2602104","price":35.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602104_FRO.jpg?v=1781716098"},{"product_id":"techpro-ni2602106-fog-light-bracket-left","title":"TechPro NI2602106 Fog Light Bracket - Left","description":"\u003ch2\u003eFog Light Bracket for Nissan Pathfinder\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket is built for a factory-style fit on the left side of the vehicle. It is made with high-quality materials for durable, long-term performance and reliable support in the front lighting assembly. Part number NI2602106 is a direct-fit solution for select Nissan Pathfinder models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style precision for accurate alignment\u003c\/li\u003e\n\u003cli\u003eDurable construction for lasting performance\u003c\/li\u003e\n\u003cli\u003eLeft-side fog light bracket application\u003c\/li\u003e\n\u003cli\u003eOE cross-reference: 269153JA0A\u003c\/li\u003e\n\u003cli\u003eTechPro part number NI2602106\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eTechPro NI2602106 is a fog light bracket for 2013-2016 Nissan Pathfinder, left. It is engineered to restore proper mounting support for the fog light assembly and help maintain correct positioning within the front body structure. For buyers searching for a 2013 Nissan Pathfinder left fog light bracket, a 2014-2016 Nissan Pathfinder fog light bracket, or an OE-style replacement for part number NI2602106, this component matches the listed application and OEM reference 269153JA0A.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Resolve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or missing fog light mounting support\u003c\/li\u003e\n\u003cli\u003eMisaligned fog light positioning on the left side\u003c\/li\u003e\n\u003cli\u003eLoose attachment points after front-end repair\u003c\/li\u003e\n\u003cli\u003eReplacement needs for damaged OE bracket 269153JA0A\u003c\/li\u003e\n\u003cli\u003eRestoration of proper fog light assembly fit on Nissan Pathfinder models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall on the left side only for the listed Pathfinder applications. Verify the OEM reference, mounting points, and bracket orientation before installation. Confirm the fog light assembly seats correctly after installation to ensure proper alignment with surrounding body panels and lighting components.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with materials selected for durability and consistent function. The factory-style design supports accurate fitment for the specified Nissan Pathfinder applications, and the OE cross-reference helps confirm application matching for part number NI2602106.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692741301,"sku":"HYNX-NI2602106","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602106_FRO.jpg?v=1781716105"},{"product_id":"techpro-ni2602107-fog-light-bracket-left","title":"TechPro NI2602107 Fog Light Bracket - Left","description":"\u003ch2\u003eTechPro Fog Light Bracket for Nissan Left Side\u003c\/h2\u003e\u003cp\u003eRestore secure fog lamp mounting with this TechPro fog light bracket, part number NI2602107. It is built for factory-style precision and direct replacement use on the left side of select Nissan crossover applications, including the Nissan Qashqai and Nissan Rogue Sport.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fitment for accurate alignment\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality materials for durability\u003c\/li\u003e\n\u003cli\u003eSupports reliable long-term performance\u003c\/li\u003e\n\u003cli\u003eDirect replacement for left-side fog light mounting\u003c\/li\u003e\n\u003cli\u003eCross-references OEM 269156MA0A for the same application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro NI2602107 is a left fog light bracket engineered for 2017-2019 Nissan Qashqai and 2017-2019 Nissan Rogue Sport applications. This bracket helps secure the fog lamp in the correct position so the assembly sits properly within the front fascia. For buyers searching for a 2017-2019 Nissan Rogue Sport left fog light bracket or a 2017-2019 Nissan Qashqai left fog lamp bracket, NI2602107 provides a direct-fit replacement option with OE-style dimensions and mounting precision.\u003c\/p\u003e\u003cp\u003eMeasured at 9 inches long, 5.9 inches wide, and 2.8 inches high, this TechPro bracket is designed to match the original mounting layout while keeping the fog light stable and properly located. The part number NI2602107 is also useful when cross-checking replacement needs against OEM reference 269156MA0A.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting points\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp positioning on the left side\u003c\/li\u003e\n\u003cli\u003eMisaligned front lighting after front-end repair\u003c\/li\u003e\n\u003cli\u003eImproper fog light fitment in the bumper opening\u003c\/li\u003e\n\u003cli\u003eReplacement needs for OEM 269156MA0A applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2017-2019 Nissan Qashqai, left. Fits 2017-2019 Nissan Rogue Sport, left. Verify the OEM reference and left-side mounting location before installation. Compare the bracket shape and dimensions to the original part to confirm proper alignment with the fog light housing and bumper opening.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this fog light bracket with high-quality materials and factory-style precision to support durable, lasting performance. Part number NI2602107 is intended for dependable replacement use on the listed Nissan applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692774069,"sku":"HYNX-NI2602107","price":45.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602107_Fro.jpg?v=1781716112"}],"url":"https:\/\/www.partcatalog.com\/collections\/brackets-flanges-and-hangers-7.oembed?page=2","provider":"PartCatalog","version":"1.0","type":"link"}