{"title":"Electrical, Lighting and Body \u003e Brackets, Flanges and Hangers","description":"\u003cp\u003eFog light and headlight brackets are the structural mounting points that hold your forward lighting in precise alignment. These stamped steel or reinforced plastic brackets bolt to the bumper fascia, crash bar, or frame rail and keep your lights aimed correctly — a bent or cracked bracket throws off beam angle, which affects both your visibility and oncoming drivers. Most brackets fail after front-end impacts (even low-speed parking lot bumps), prolonged road salt exposure, or aggressive off-road use that flexes the front fascia. They rarely need replacement on schedule; damage is almost always the trigger. When buying, verify the exact mounting hole pattern and light cutout shape for your specific trim level — fog light brackets in particular vary by package (e.g., Sport vs. base trim) even within the same model year. OEM brackets guarantee fit but often cost 2–3x more than quality aftermarket options from suppliers like TYC or Dorman, which are a practical choice for most street vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadlight or fog light sits visibly low, high, or angled\u003c\/strong\u003e — if the light housing looks misaligned with the bumper or grille opening and adjustment screws are maxed out, the bracket itself is likely bent or broken at a mounting tab.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight housing moves or rattles when you push on it\u003c\/strong\u003e — a bracket with a cracked weld, snapped tab, or corroded mounting point won't hold the housing rigid; road vibration will make it worse over time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible cracking, rust-through, or deformation on the bracket\u003c\/strong\u003e — surface rust is cosmetic, but rust that's eaten through the metal or any plastic bracket with stress cracks at the mounting holes needs replacement before the light becomes a road hazard.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight went dark after a minor collision\u003c\/strong\u003e — if the bulb and wiring check out but the light is cocked sideways or pushed back into the bumper, the bracket absorbed the impact and needs to be replaced before reinstalling the housing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBumper cover or fascia replacement on the agenda\u003c\/strong\u003e — if you're already pulling the front end apart, inspect the brackets while they're accessible; replacing a damaged one now costs far less in labor than revisiting the job later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo I need to match the bracket to my exact trim level, or will any bracket for my model year fit?\u003c\/strong\u003e\n  Trim level matters more than most buyers expect. Fog light brackets especially differ between base, mid, and sport trims on the same platform — the cutout shape and bolt pattern are often unique to each. Always cross-reference your trim code or OEM part number before ordering, and double-check the product fitment notes on each listing.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAre aftermarket fog light and headlight brackets as reliable as OEM?\u003c\/strong\u003e\n  For most daily drivers, yes. Aftermarket brackets from established suppliers like Dorman or TYC use comparable steel gauge and corrosion coatings to OEM. Where OEM pulls ahead is on plastic clip geometry and paint-match priming — worth the premium if you're doing a high-quality bumper respray or the vehicle is a late-model with tight panel gaps.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eCan I replace a headlight or fog light bracket myself, and what else should I inspect at the same time?\u003c\/strong\u003e\n  Most brackets are a straightforward DIY job — remove the bumper cover or access panel, unbolt the old bracket, transfer the light housing, and reinstall. Budget 1–2 hours depending on the platform. While you're in there, inspect the headlight adjusters, wiring harness connectors, and bumper mounting clips — all are easy to address with the fascia already off.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"dorman-1592231-headlight-bracket","title":"Dorman 1592231 Headlight Bracket - Right","description":"\u003ch2\u003eOE-Style Headlight Bracket for Right Side Repair\u003c\/h2\u003e\u003cp\u003eThis Dorman headlight bracket is built to match the fit and function of the original part on specified vehicles. It is made from quality materials for dependable performance and is a direct replacement for right-side headlight support on select Chevrolet and Pontiac models. Part number 1592231 is a practical choice when restoring proper headlamp alignment and mounting integrity.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement headlight bracket for the right side\u003c\/li\u003e\n\u003cli\u003eMatches original fit and function on specified vehicles\u003c\/li\u003e\n\u003cli\u003eConstructed from quality materials for reliable service\u003c\/li\u003e\n\u003cli\u003eDesigned for 2005-2010 Chevrolet Cobalt, right\u003c\/li\u003e\n\u003cli\u003eDesigned for 2007-2010 Pontiac G5, right\u003c\/li\u003e\n\u003cli\u003eDesigned for 2005-2006 Pontiac G4, right\u003c\/li\u003e\n\u003cli\u003eDesigned for 2005-2006 Pontiac Pursuit, right\u003c\/li\u003e\n\u003cli\u003ePart number 1592231 for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eDorman 1592231 is a right headlight bracket engineered as an OE-style replacement for vehicles that need a secure mounting point for the headlamp assembly. It is listed for 2005-2010 Chevrolet Cobalt, right; 2007-2010 Pontiac G5, right; 2005-2006 Pontiac G4, right; and 2005-2006 Pontiac Pursuit, right. This part cross-references Eagle Eye GM364-BRACKETR for the same application.\u003c\/p\u003e\u003cp\u003eUse this bracket when the original headlight support is cracked, bent, or no longer holding the lamp in the correct position. Accurate mounting helps maintain proper headlight alignment and a clean front-end repair on Chevrolet Cobalt and Pontiac G5 applications.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked right headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp housing at the front of the vehicle\u003c\/li\u003e\n\u003cli\u003eMisaligned headlight aim caused by damaged support points\u003c\/li\u003e\n\u003cli\u003eFront-end collision damage affecting lamp retention\u003c\/li\u003e\n\u003cli\u003eReplacement needs during body repair on Chevrolet Cobalt or Pontiac G5 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify vehicle year, make, model, and right-side application before installation. Compare the original bracket to the replacement part to confirm mounting points and lamp alignment. For best results, inspect adjacent headlight components and surrounding body panels for damage that could affect fitment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDorman manufactures this bracket to match original part fit and function using quality materials for dependable performance. Part number 1592231 is built for consistent replacement use on the listed Chevrolet and Pontiac applications.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":43607071522997,"sku":"DWRT-1592231","price":57.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_1592231_Fro.jpg?v=1774983007"},{"product_id":"depo-08-315-2022l-ud-fog-light-bracket","title":"Depo 08-315-2022L-UD Fog Light Bracket - Left","description":"\u003ch2\u003eLeft Fog Light Bracket for Nissan Altima\u003c\/h2\u003e\u003cp\u003eThis Depo fog light bracket is a direct-fit replacement for the left side on select 2007-2009 Nissan Altima models. It is built for vehicles that need a replacement mounting bracket for the fog lamp assembly, using the OE reference 26915JA00A and NI2602100 application notes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Depo\u003c\/li\u003e\n\u003cli\u003ePart number: 08-315-2022L-UD\u003c\/li\u003e\n\u003cli\u003eLeft-side fog light bracket\u003c\/li\u003e\n\u003cli\u003eFits 2007-2009 Nissan Altima, left\u003c\/li\u003e\n\u003cli\u003eOE reference: 26915JA00A\u003c\/li\u003e\n\u003cli\u003eCross-reference application: NI2602100\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eReplacement Mounting Support\u003c\/h2\u003e\u003cp\u003eUse this fog light bracket when servicing the front lighting assembly on a 2007, 2008, or 2009 Nissan Altima. The Depo 08-315-2022L-UD helps restore the correct mounting point for the left fog light, supporting proper alignment within the front bumper area. It is a practical replacement for damaged, missing, or worn bracket hardware on the Nissan Altima left side.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left fog light mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp positioning in the bumper opening\u003c\/li\u003e\n\u003cli\u003eImproper alignment after front-end repair\u003c\/li\u003e\n\u003cli\u003eReplacement need for a missing OE-style bracket\u003c\/li\u003e\n\u003cli\u003eFitment correction for left-side fog light service on a Nissan Altima\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 2007-2009 Nissan Altima before ordering. Confirm left-side placement and compare the OE reference 26915JA00A or NI2602100 to the original bracket before installation. Test-fit the fog light assembly and bumper opening to ensure the mounting points align correctly. Part number 08-315-2022L-UD should be matched to the left position only.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo replacement lighting components are cataloged for specific vehicle applications, and this bracket is listed for the confirmed Nissan Altima fitment shown above.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626487742645,"sku":"DGKS-08-315-2022L-UD","price":15.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_083152022LUD_Fro.jpg?v=1774986106"},{"product_id":"depo-08-315-2022r-ud-fog-light-bracket","title":"Depo 08-315-2022R-UD Fog Light Bracket - Right","description":"\u003ch2\u003eFog Light Bracket for Nissan Altima\u003c\/h2\u003e\u003cp\u003eThis Depo fog light bracket is a direct-fit replacement for the right side on select 2007-2009 Nissan Altima models. It is built for drivers replacing a damaged or missing fog lamp mounting bracket and restoring proper lamp alignment.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Depo\u003c\/li\u003e\n\u003cli\u003ePart number: 08-315-2022R-UD\u003c\/li\u003e\n\u003cli\u003eRight-side fog light bracket\u003c\/li\u003e\n\u003cli\u003eDirect replacement for OE reference 26910JA00A\u003c\/li\u003e\n\u003cli\u003eCross-reference: NI2603100\u003c\/li\u003e\n\u003cli\u003eFits 2007-2009 Nissan Altima, right\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eDepo 08-315-2022R-UD is a fog light bracket for the right side of the vehicle, made for 2007, 2008, and 2009 Nissan Altima applications. Use it when the original mounting bracket is cracked, bent, or no longer holds the fog lamp in the correct position. This part supports proper fog light placement for a clean OE-style repair on the Nissan Altima.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken fog light mounting points\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned fog lamp positioning\u003c\/li\u003e\n\u003cli\u003eDamage from front-end impact or road debris\u003c\/li\u003e\n\u003cli\u003eReplacement of a missing right-side bracket\u003c\/li\u003e\n\u003cli\u003eRestoration of factory-style fog light support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eFits 2007-2009 Nissan Altima, right. Verify the OE reference 26910JA00A and the NI2603100 cross-reference before ordering. Compare the existing bracket shape and mounting points to confirm correct side and application. Professional installation is recommended for accurate fog lamp alignment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo replacement lighting and body components are selected for OE-style fitment and application-specific use. Part number 08-315-2022R-UD is intended for the right-side fog light bracket location on the listed Nissan Altima models.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626487775413,"sku":"DGKS-08-315-2022R-UD","price":20.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_083152022RUD_Fro.jpg?v=1774986106"},{"product_id":"depo-312-2516l-ud-fog-light-bracket","title":"Depo 312-2516L-UD Fog Light Bracket - Left","description":"\u003ch2\u003eFog Light Bracket for Toyota Camry\u003c\/h2\u003e\u003cp\u003eThis Depo fog light bracket is a direct-fit replacement for the left side on select 2012-2014 Toyota Camry models. It is built for drivers replacing a damaged or missing mounting bracket and need a part that matches the original application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLeft-side fog light bracket for select Toyota Camry applications\u003c\/li\u003e\n\u003cli\u003eOE reference: 5212606320\u003c\/li\u003e\n\u003cli\u003eDirect replacement style for factory-style mounting\u003c\/li\u003e\n\u003cli\u003eDepo part number 312-2516L-UD\u003c\/li\u003e\n\u003cli\u003eFits 2012-2014 Toyota Camry, left\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eUse this fog light bracket to restore proper mounting support for the left fog lamp assembly on a 2012-2014 Toyota Camry. The bracket is identified for OE cross-reference TO2602100 and OEM number 5212606320, making it a practical choice when replacing a broken bracket after impact, wear, or front-end repair. Depo 312-2516L-UD is listed for the left position only and matches the confirmed vehicle fitment for Toyota Camry.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a cracked or broken fog light mounting bracket\u003c\/li\u003e\n\u003cli\u003eRestoring alignment after front bumper repair\u003c\/li\u003e\n\u003cli\u003eCorrecting loose or misaligned fog lamp positioning\u003c\/li\u003e\n\u003cli\u003eAddressing missing factory-style bracket support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify left-side fitment before ordering and compare the OE number 5212606320 against the original part. Confirm the bracket location and mounting points on the vehicle before installation. For best results, inspect the surrounding fog lamp housing and bumper area for damage that could affect alignment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo manufactures replacement lighting and body components for OE-style applications. This part cross-references TO2602100 and OEM 5212606320 for the same application.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626607411381,"sku":"DGKS-312-2516L-UD","price":19.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3122516LUD_Fro.jpg?v=1774986278"},{"product_id":"depo-312-2516r-ud-fog-light-bracket","title":"Depo 312-2516R-UD Fog Light Bracket - Right","description":"\u003ch2\u003eFog Light Bracket for Toyota Camry\u003c\/h2\u003e\u003cp\u003eThis Depo fog light bracket is a direct-fit lighting support component for the right side of select Toyota Camry models. It is built for 2012-2014 Toyota Camry applications and matches OE reference TO2603100 and OEM 5212506320.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2012-2014 Toyota Camry, right side\u003c\/li\u003e\n\u003cli\u003eDepo part number 312-2516R-UD\u003c\/li\u003e\n\u003cli\u003eFog light bracket for front lighting support\u003c\/li\u003e\n\u003cli\u003eOE reference: TO2603100\u003c\/li\u003e\n\u003cli\u003eOEM reference: 5212506320\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eUse this fog light bracket to restore proper mounting and alignment for the right-side fog lamp assembly on a Toyota Camry. The Depo 312-2516R-UD is specified for 2012, 2013, and 2014 Camry models and is intended for vehicles that use the listed OE and OEM references. For buyers searching for a 2012-2014 Toyota Camry right fog light bracket or Depo 312-2516R-UD replacement, this part provides the correct application match.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or missing right fog light mounting support\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp positioning at the front bumper area\u003c\/li\u003e\n\u003cli\u003eImproper alignment after front-end repair\u003c\/li\u003e\n\u003cli\u003eReplacement needs for damaged OE bracket TO2603100\u003c\/li\u003e\n\u003cli\u003eOEM bracket replacement for part number 5212506320\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 2012-2014 Toyota Camry and confirm the right-side location before installation. Compare the existing bracket to the OE reference TO2603100 and OEM 5212506320 to ensure correct match-up with the fog lamp assembly and surrounding bumper components. Depo 312-2516R-UD is a fitment-specific part, so checking the original mounting points before installation is recommended.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo manufactures OE-style replacement lighting and body components for direct application matching. This part cross-references OE reference TO2603100 and OEM 5212506320 for the same application.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626607444149,"sku":"DGKS-312-2516R-UD","price":19.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3122516RUD_Fro_ee1f6750-33a8-4187-b881-31f308c1a346.jpg?v=1774986279"},{"product_id":"depo-312-2517l-ud-fog-light-bracket","title":"Depo 312-2517L-UD Fog Light Bracket - Left","description":"\u003ch2\u003eFog Light Bracket for Toyota Camry\u003c\/h2\u003e\u003cp\u003eThis Depo fog light bracket is a direct-fit replacement for the left side on select 2012-2014 Toyota Camry models. It is built for drivers replacing a damaged or missing fog lamp mounting bracket and needing a part that matches the original application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Depo\u003c\/li\u003e\n\u003cli\u003ePart number: 312-2517L-UD\u003c\/li\u003e\n\u003cli\u003eFog light bracket for the left side\u003c\/li\u003e\n\u003cli\u003eCompatible with 2012-2014 Toyota Camry, left\u003c\/li\u003e\n\u003cli\u003eOE reference: 5212606200\u003c\/li\u003e\n\u003cli\u003eCross-reference: TO2602101\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Fitment and Function\u003c\/h2\u003e\u003cp\u003eDepo 312-2517L-UD is a fog light bracket for the left side of the 2012-2014 Toyota Camry. It supports proper fog lamp positioning and helps restore the original mounting point when the factory bracket is cracked, bent, or missing. This part is listed for Toyota Camry applications with OE reference 5212606200 and cross-reference TO2602101.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken fog light mounting bracket on the left side\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned fog lamp housing\u003c\/li\u003e\n\u003cli\u003eFog light that no longer sits in the correct factory position\u003c\/li\u003e\n\u003cli\u003eDamage from minor front-end impact or road debris\u003c\/li\u003e\n\u003cli\u003eNeed for a replacement bracket during fog light repair on a Toyota Camry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify left-side fitment against the vehicle’s existing bracket and OE number before installation. Compare the mounting points and fog lamp alignment to the original part to confirm proper placement on the 2012-2014 Toyota Camry. The part number 312-2517L-UD is intended for the left position only.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo is an aftermarket brand known for replacement lighting and body components. This bracket is cataloged to match the specified Toyota Camry application and OE reference for straightforward parts matching.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626607476917,"sku":"DGKS-312-2517L-UD","price":18.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3122517LUD_Fro.jpg?v=1774986279"},{"product_id":"depo-312-2517r-ud-fog-light-bracket","title":"Depo 312-2517R-UD Fog Light Bracket - Right","description":"\u003ch2\u003eFog Light Bracket for Toyota Camry\u003c\/h2\u003e\u003cp\u003eThis Depo fog light bracket is a direct-fit lighting support component for the right side of select Toyota Camry models. It is built for 2012-2014 Toyota Camry applications and references OE number 5212506200 for the listed position.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Depo\u003c\/li\u003e\n\u003cli\u003ePart number: 312-2517R-UD\u003c\/li\u003e\n\u003cli\u003eFog light bracket for the right side\u003c\/li\u003e\n\u003cli\u003eFits 2012-2014 Toyota Camry, right\u003c\/li\u003e\n\u003cli\u003eOE reference: 5212506200\u003c\/li\u003e\n\u003cli\u003eCross-reference: TO2603101\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cp\u003eCompatible with 2012-2014 Toyota Camry, right side. This part number, 312-2517R-UD, is listed for the passenger-side fog light bracket application on the Toyota Camry platform.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting points\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp alignment on the right side\u003c\/li\u003e\n\u003cli\u003eDamage from minor front-end impact\u003c\/li\u003e\n\u003cli\u003eMissing support for the fog light assembly\u003c\/li\u003e\n\u003cli\u003eImproper lamp positioning after bracket failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, make, model, and right-side mounting location before ordering. Compare the existing bracket to the OE reference and part number 312-2517R-UD to confirm the correct Toyota Camry fitment. Check surrounding lamp and bumper mounting points for damage before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo replacement lighting components are cataloged for direct-fit applications and OE-style fitment matching. This part cross-references TO2603101 for the same application.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43626607509685,"sku":"DGKS-312-2517R-UD","price":18.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3122517RUD_Fro.jpg?v=1774986279"},{"product_id":"depo-330-1705r-ud-fog-light-bracket","title":"Depo 330-1705R-UD Fog Light Bracket - Right","description":"\u003ch2\u003eFog Light Bracket for Ford F-150\u003c\/h2\u003e\u003cp\u003eThis Depo fog light bracket is a direct-fit replacement for the right side on select 2011-2014 Ford F-150 trucks. It is built for vehicles that use OEM reference BL3Z15266A and cross-reference FO2603102 for the same application. Part number 330-1705R-UD is a practical choice when restoring proper fog light mounting on the passenger side.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRight-side fog light bracket for select Ford F-150 applications\u003c\/li\u003e\n\u003cli\u003eFits 2011-2014 Ford F-150, right\u003c\/li\u003e\n\u003cli\u003eOE reference BL3Z15266A\u003c\/li\u003e\n\u003cli\u003eCross-reference: FO2603102\u003c\/li\u003e\n\u003cli\u003eDepo part number 330-1705R-UD\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eUse this fog light bracket to replace a damaged or missing mounting point on the right side of a 2011-2014 Ford F-150. Depo 330-1705R-UD is specified for the passenger-side position and follows the listed OE application, making it a straightforward option for body repair, front-end restoration, or fog lamp mounting service on the Ford F-150. If you are searching for a right fog light bracket for 2011-2014 Ford F-150, this part number 330-1705R-UD matches the confirmed fitment shown here.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp alignment on the right side\u003c\/li\u003e\n\u003cli\u003eMissing bracket after front-end repair\u003c\/li\u003e\n\u003cli\u003eImproper fog light support on the passenger side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s right-side fog light mounting location and compare the OE reference BL3Z15266A before installation. Confirm the bracket matches the existing lamp housing and bumper-side attachment points on your Ford F-150. Professional installation is recommended for body and lighting repairs to ensure correct alignment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo replacement lighting and body components are cataloged to match specific OE applications. This part is listed for the confirmed fitment shown above and is identified by part number 330-1705R-UD.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43629128351925,"sku":"DGKS-330-1705R-UD","price":37.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3301705RUD_Fro.jpg?v=1774986575"},{"product_id":"depo-334-1702l-ud-headlight-bracket","title":"Depo 334-1702L-UD Headlight Bracket - Left","description":"\u003ch2\u003eLeft Headlight Bracket for Ram Trucks\u003c\/h2\u003e\u003cp\u003eThis Depo headlight bracket is a left-side replacement for select Ram and Dodge Ram trucks with radiator support-mounted headlamp assemblies. It is built for direct replacement use on the listed applications, including Ram 1500 Classic, Ram 1500, Ram 2500, Ram 3500, and Dodge Ram 1500\/2500\/3500 models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Depo\u003c\/li\u003e\n\u003cli\u003ePart number: 334-1702L-UD\u003c\/li\u003e\n\u003cli\u003eLeft headlight bracket for radiator support-mounted applications\u003c\/li\u003e\n\u003cli\u003eDirect replacement for OEM reference 68222827AB on listed vehicles\u003c\/li\u003e\n\u003cli\u003eCross-reference: CH2508108 for the same application\u003c\/li\u003e\n\u003cli\u003eCompatible with Ram and Dodge Ram truck front lighting support locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cp\u003eFits 2021-2024 Ram 1500 Classic, left.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2020 Ram 1500 Classic, left.\u003c\/li\u003e\n\u003cli\u003eFits 2019 Ram 1500 Classic, left.\u003c\/li\u003e\n\u003cli\u003eFits 2011-2018 Ram 1500, left.\u003c\/li\u003e\n\u003cli\u003eFits 2011-2018 Ram 2500, left.\u003c\/li\u003e\n\u003cli\u003eFits 2011-2018 Ram 3500, left.\u003c\/li\u003e\n\u003cli\u003eFits 2009-2010 Dodge Ram 1500, left.\u003c\/li\u003e\n\u003cli\u003eFits 2010 Dodge Ram 2500, left.\u003c\/li\u003e\n\u003cli\u003eFits 2010 Dodge Ram 3500, left.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left headlight mounting points\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front-end repair\u003c\/li\u003e\n\u003cli\u003eDamaged radiator support-mounted lamp support on Ram trucks\u003c\/li\u003e\n\u003cli\u003eImproper headlight positioning caused by a failed bracket\u003c\/li\u003e\n\u003cli\u003eReplacement needs after collision-related front lighting damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s left-side mounting style and compare the OEM reference 68222827AB or CH2508108 before installation. Confirm the bracket location on the radiator support and inspect adjacent headlight and support components for damage that could affect alignment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo replacement lighting and body components are cataloged for application-specific fitment on the listed Ram and Dodge Ram trucks. Part number 334-1702L-UD is identified for the left side on the vehicles shown above.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43629359759541,"sku":"DGKS-334-1702L-UD","price":60.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3341702LUD_Fro.jpg?v=1774986748"},{"product_id":"depo-334-1702r-ud-headlight-bracket","title":"Depo 334-1702R-UD Headlight Bracket - Right","description":"\u003ch2\u003eRight Headlight Bracket for Ram Trucks\u003c\/h2\u003e\u003cp\u003eThis Depo right headlight bracket is a direct-fit lighting support component for select Ram and Dodge Ram trucks. It is built for the right side and matches OE reference 68222826AB on listed applications, making it a practical replacement for damaged or missing headlight mounting points.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Depo\u003c\/li\u003e\n\u003cli\u003ePart number: 334-1702R-UD\u003c\/li\u003e\n\u003cli\u003eRight-side headlight bracket\u003c\/li\u003e\n\u003cli\u003eRad support mounted on listed applications\u003c\/li\u003e\n\u003cli\u003eOE reference: 68222826AB\u003c\/li\u003e\n\u003cli\u003eCross-reference: CH2509108\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2021-2024 Ram 1500 Classic, right.\u003c\/li\u003e\n\u003cli\u003eFits 2020 Ram 1500 Classic, right.\u003c\/li\u003e\n\u003cli\u003eFits 2019 Ram 1500 Classic, right.\u003c\/li\u003e\n\u003cli\u003eFits 2011-2018 Ram 1500, right.\u003c\/li\u003e\n\u003cli\u003eFits 2011-2018 Ram 2500, right.\u003c\/li\u003e\n\u003cli\u003eFits 2011-2018 Ram 3500, right.\u003c\/li\u003e\n\u003cli\u003eFits 2009-2010 Dodge Ram 1500, right.\u003c\/li\u003e\n\u003cli\u003eFits 2010 Dodge Ram 2500, right.\u003c\/li\u003e\n\u003cli\u003eFits 2010 Dodge Ram 3500, right.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eDepo 334-1702R-UD is a right headlight bracket for Ram 1500 Classic, Ram 1500, Ram 2500, and Ram 3500 applications listed above. It is used on radiator support mounted configurations and follows the OE reference 68222826AB on those vehicles. For buyers searching for a right headlight bracket for Ram 1500 Classic or a headlight mounting bracket for 2011-2018 Ram 2500 and Ram 3500 trucks, this part number provides a direct replacement path.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked right headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front-end repair\u003c\/li\u003e\n\u003cli\u003eMissing radiator support headlight attachment point\u003c\/li\u003e\n\u003cli\u003eImproper headlight positioning on Ram truck front fascia repairs\u003c\/li\u003e\n\u003cli\u003eReplacement for OE bracket 68222826AB applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s year, model, and right-side radiator support mounting style before installation. Compare the existing bracket to part number 334-1702R-UD and OE reference 68222826AB to confirm match. Test-fit the headlamp assembly and check alignment before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo manufactures replacement lighting and body components for OE-style applications. This bracket is intended for the listed Ram and Dodge Ram fitments and follows the referenced factory mounting application.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":43629359857845,"sku":"DGKS-334-1702R-UD","price":60.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3341702RUD_Fro.jpg?v=1774986748"},{"product_id":"vaico-v30-1600-headlight-bracket","title":"Vaico V30-1600 Headlight Bracket - Front Left","description":"\u003ch2\u003eVaico V30-1600 Headlight Bracket for Mercedes-Benz E-Class\u003c\/h2\u003e\u003cp\u003eThe Vaico V30-1600 is a plastic headlight bracket for front-left applications on select Mercedes-Benz E-Class models. It is built to match the original mounting location and support the headlight assembly in the correct position.\u003c\/p\u003e\u003cp\u003eFor Mercedes-Benz E320, E350, E500, and E55 AMG applications, this headlight bracket supports a clean OE-style repair where the front-left lamp mounting point has been damaged or worn. VAICO product line parts are developed for precise vehicle-specific fitment, and this bracket follows that approach for the E-Class platform.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: V30-1600\u003c\/li\u003e\n\u003cli\u003eHeadlight bracket for front-left installation\u003c\/li\u003e\n\u003cli\u003ePlastic construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 260 mm length, 140 mm width, 42 mm height\u003c\/li\u003e\n\u003cli\u003eFits Mercedes-Benz E320, E350, E500, and E55 AMG applications listed below\u003c\/li\u003e\n\u003cli\u003eCross-reference: 211 820 13 14\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Vaico V30-1600 headlight bracket is a direct-fit body and lighting support component for select 2003-2006 Mercedes-Benz E-Class vehicles. It is sized at 260 mm long, 140 mm wide, and 42 mm high, with a lightweight plastic construction that matches the needs of front-end lamp mounting repair. This part number, V30-1600, is listed for front-left use on E320, E350, E500, and E55 AMG models where the original bracket has cracked, broken, or no longer holds the headlight assembly securely.\u003c\/p\u003e\u003cp\u003eFits 2003-2006 Mercedes-Benz E320, front left. Fits 2006 Mercedes-Benz E350, front left. Fits 2003-2006 Mercedes-Benz E500, front left. Fits 2003-2006 Mercedes-Benz E55 AMG, front left. This part cross-references 211 820 13 14 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked front-left headlight mounting point\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front-end service\u003c\/li\u003e\n\u003cli\u003eImproper lamp positioning after body repair\u003c\/li\u003e\n\u003cli\u003eReplacement of a damaged OE-style lighting support bracket\u003c\/li\u003e\n\u003cli\u003eRestoration of secure headlight attachment on Mercedes-Benz E-Class models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, model, and front-left position before ordering. Compare the original bracket shape and mounting points to the V30-1600 and confirm the listed interchange reference when matching parts. Because this is a vehicle-specific bracket, proper alignment during installation is important to maintain correct headlight positioning.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eVAICO parts are cataloged for application-specific fitment on European vehicles, including Mercedes-Benz E-Class models. Confirm the part number V30-1600 against the existing bracket and vehicle fitment details before installation.\u003c\/p\u003e","brand":"Vaico","offers":[{"title":"Default Title","offer_id":45216263602357,"sku":"CMTX-V30-1600","price":114.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/VC_V301600_Fro.jpg?v=1775136194"},{"product_id":"vaico-v30-1601-headlight-bracket","title":"Vaico V30-1601 Headlight Bracket - Front Right","description":"\u003ch2\u003eMercedes-Benz E-Class Headlight Bracket\u003c\/h2\u003e\u003cp\u003eThis Vaico headlight bracket is a front right replacement for select Mercedes-Benz E-Class models. Built from plastic and shaped to match OE-style mounting dimensions, it supports secure headlamp positioning on the passenger-side front corner.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Vaico \/ VAICO\u003c\/li\u003e\n\u003cli\u003ePart number: V30-1601\u003c\/li\u003e\n\u003cli\u003eHeadlight bracket for front right installation\u003c\/li\u003e\n\u003cli\u003ePlastic construction\u003c\/li\u003e\n\u003cli\u003eDimensions: 260 mm length, 140 mm width, 42 mm height\u003c\/li\u003e\n\u003cli\u003eWeight: 0.128 kg\u003c\/li\u003e\n\u003cli\u003eOE reference: 2118201414\u003c\/li\u003e\n\u003cli\u003eCross-reference: 211 820 14 14, A 211 820 14 14\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cp\u003eCompatible with Mercedes-Benz E300, front right, for 2008-2009 models. Compatible with Mercedes-Benz E320, front right, for 2003-2009 models. Compatible with Mercedes-Benz E350, front right, for 2006-2009 models. Compatible with Mercedes-Benz E550, front right, for 2007-2009 models. Compatible with Mercedes-Benz E63 AMG, front right, for 2007-2009 models. Compatible with Mercedes-Benz E280, front right, for 2007 models. Compatible with Mercedes-Benz E500, front right, for 2003-2006 models. Compatible with Mercedes-Benz E55 AMG, front right, for 2003-2006 models.\u003c\/p\u003e\u003cp\u003eVAICO parts are positioned as OE-style replacement components for European vehicles, with attention to fit, form, and application-specific dimensions. This V30-1601 bracket follows the original OE number 2118201414 and is listed for multiple Mercedes-Benz E-Class variants, including E320 and E350 front right applications.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment on the front right side\u003c\/li\u003e\n\u003cli\u003eDamage from front-end impact or bumper removal\u003c\/li\u003e\n\u003cli\u003eImproper headlight support after prior repair work\u003c\/li\u003e\n\u003cli\u003eRestoring secure OE-style lamp positioning on Mercedes-Benz E-Class models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the OE number and match the vehicle year, model, and front right position before installation. Compare the bracket dimensions to the original part to confirm alignment points and mounting shape. Inspect adjacent headlamp and body mounting surfaces for damage that could affect fitment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eVAICO replacement parts are cataloged for application-specific fitment on European vehicles. This part number, V30-1601, is referenced to OE number 2118201414 for the listed Mercedes-Benz E-Class applications.\u003c\/p\u003e","brand":"Vaico","offers":[{"title":"Default Title","offer_id":45216263667893,"sku":"CMTX-V30-1601","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/VC_V301601_Fro_269f41c9-2563-4a80-a657-71aa3d196afe.jpg?v=1775136195"},{"product_id":"eagle-eye-gm364-bracketl-headlight-bracket-left","title":"Eagle Eye GM364-BRACKETL Headlight Bracket - Left","description":"\u003ch2\u003eHeadlight Bracket for Chevrolet Cobalt and Pontiac G5\u003c\/h2\u003e\u003cp\u003eThe Eagle Eye GM364-BRACKETL is a left headlight bracket built for specific Chevrolet and Pontiac applications. It is a direct-fit lighting support component for 2005-2010 Chevrolet Cobalt and 2007-2009 Pontiac G5 models, with clear polycarbonate construction and a waterproof design.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLeft-side headlight bracket for OE-style lighting support\u003c\/li\u003e\n\u003cli\u003eFits 2005-2010 Chevrolet Cobalt, left\u003c\/li\u003e\n\u003cli\u003eFits 2007-2009 Pontiac G5, left\u003c\/li\u003e\n\u003cli\u003eClear polycarbonate lens material\u003c\/li\u003e\n\u003cli\u003eIncandescent light source type\u003c\/li\u003e\n\u003cli\u003e12-volt electrical specification\u003c\/li\u003e\n\u003cli\u003eWaterproof construction for exterior lighting use\u003c\/li\u003e\n\u003cli\u003ePart number GM364-BRACKETL for catalog and cross-reference lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis Eagle Eye headlight bracket is specified for the left side and is sized for the listed Chevrolet Cobalt and Pontiac G5 applications. The GM364-BRACKETL uses polycarbonate lens material and a clear lens color, with a 12-volt incandescent lighting setup and waterproof construction for dependable exterior use. For buyers searching by vehicle, this part number GM364-BRACKETL is a direct reference for 2005-2010 Chevrolet Cobalt left headlight bracket and 2007-2009 Pontiac G5 left headlight bracket applications. This part cross-references OE-style numbering such as GM2508106 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left headlight bracket mounting points\u003c\/li\u003e\n\u003cli\u003eLoose headlight alignment on the driver-side front end\u003c\/li\u003e\n\u003cli\u003eDamage from minor front-end impact or vibration\u003c\/li\u003e\n\u003cli\u003eWater intrusion concerns around exterior lighting support\u003c\/li\u003e\n\u003cli\u003eReplacement needs for Chevrolet Cobalt and Pontiac G5 headlight bracket service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify left-side placement before ordering and compare the existing bracket to the GM364-BRACKETL for match confirmation. Confirm the vehicle year, make, and model against the listed fitment: 2005-2010 Chevrolet Cobalt, left, and 2007-2009 Pontiac G5, left. Check surrounding headlight mounting points, connectors, and housing condition during installation so the replacement bracket seats correctly and supports proper lamp alignment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eEagle Eye manufactures this bracket with application-specific dimensions and waterproof construction for the listed vehicles. The part number GM364-BRACKETL and OE-style cross-reference GM2508106 provide a clear catalog match for ordering and verification.\u003c\/p\u003e","brand":"Eagle Eye","offers":[{"title":"Default Title","offer_id":51905649213621,"sku":"CFQK-GM364-BRACKETL","price":25.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7E_GM364BRACKETL_Fro.jpg?v=1774987138"},{"product_id":"eagle-eye-gm364-bracketr-headlight-bracket-right","title":"Eagle Eye GM364-BRACKETR Headlight Bracket - Right","description":"\u003ch2\u003eEagle Eye GM364-BRACKETR Headlight Bracket\u003c\/h2\u003e\u003cp\u003eThe Eagle Eye GM364-BRACKETR is a right-side headlight bracket for select Chevrolet Cobalt and Pontiac G5 applications. Built for 12-volt lighting systems, it supports secure headlight mounting and helps restore proper front-end alignment after damage or wear.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRight-side headlight bracket for headlight mounting support\u003c\/li\u003e\n\u003cli\u003eFits 2005-2010 Chevrolet Cobalt, right\u003c\/li\u003e\n\u003cli\u003eFits 2007-2009 Pontiac G5, right\u003c\/li\u003e\n\u003cli\u003eClear lens color specification listed for the application\u003c\/li\u003e\n\u003cli\u003eWaterproof construction\u003c\/li\u003e\n\u003cli\u003eDesigned for 12-volt vehicle electrical systems\u003c\/li\u003e\n\u003cli\u003eCross-reference part numbers: 16532520 and GM2509106\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis Eagle Eye GM364-BRACKETR headlight bracket is specified for the right side on 2005-2010 Chevrolet Cobalt and 2007-2009 Pontiac G5 models. The bracket is intended for headlight mounting support in front-end lighting assemblies, with waterproof construction and dimensions listed at 13.48 x 12.76 x 8.35 inches. At 3.69 pounds, it is sized for direct replacement use in the listed applications. The part number GM364-BRACKETR is also useful when cross-checking service records or ordering by reference.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or missing right headlight mounting support\u003c\/li\u003e\n\u003cli\u003eLoose headlight alignment after front-end impact\u003c\/li\u003e\n\u003cli\u003eImproper lamp positioning caused by damaged bracket points\u003c\/li\u003e\n\u003cli\u003eReplacement needs during headlight housing repair\u003c\/li\u003e\n\u003cli\u003eFitment matching for Chevrolet Cobalt and Pontiac G5 right-side repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, make, model, and right-side position before installation. Confirm the existing mounting points and headlight assembly match the listed application for 2005-2010 Chevrolet Cobalt and 2007-2009 Pontiac G5. Compare the original bracket shape and reference GM364-BRACKETR during parts lookup to ensure the correct replacement is selected.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eEagle Eye identifies this bracket for the listed vehicle applications and cross-reference numbers, supporting accurate parts matching for OE-style repair work. Use the confirmed fitment data and part references to validate selection before installation.\u003c\/p\u003e","brand":"Eagle Eye","offers":[{"title":"Default Title","offer_id":51905649246389,"sku":"CFQK-GM364-BRACKETR","price":25.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7E_GM364BRACKETR_Fro.jpg?v=1774987139"},{"product_id":"dorman-42446-parking-aid-sensor-bracket-front-or-rear","title":"Dorman 42446 Parking Aid Sensor Bracket - Front or Rear","description":"\u003ch2\u003eDorman 42446 Parking Aid Sensor Bracket\u003c\/h2\u003e\u003cp\u003eDorman 42446 is a specific-fit parking aid sensor bracket made from black plastic for selected Ram trucks. It is engineered to match the fit, function, and performance of the original bracket when the factory part is missing or damaged from impact or service removal.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific-fit parking aid sensor bracket for selected Ram applications\u003c\/li\u003e\n\u003cli\u003eBlack plastic construction\u003c\/li\u003e\n\u003cli\u003eClip-on attachment method\u003c\/li\u003e\n\u003cli\u003eDesigned for front and rear parking aid sensor locations\u003c\/li\u003e\n\u003cli\u003eDirect replacement for OE-style sensor bracket service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2021 Ram 1500, rear\u003c\/li\u003e\n\u003cli\u003eFits 2019 Ram 1500, rear\u003c\/li\u003e\n\u003cli\u003eFits 2016-2017 Ram 1500, rear\u003c\/li\u003e\n\u003cli\u003eFits 2014 Ram 1500, rear\u003c\/li\u003e\n\u003cli\u003eFits 2021 Ram 1500 Classic, front\u003c\/li\u003e\n\u003cli\u003eFits 2020 Ram 1500, front\u003c\/li\u003e\n\u003cli\u003eFits 2018 Ram 1500, front\u003c\/li\u003e\n\u003cli\u003eFits 2015 Ram 1500, front\u003c\/li\u003e\n\u003cli\u003eFits 2019-2020 Ram 1500 Classic, rear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow This Bracket Is Used\u003c\/h2\u003e\u003cp\u003eThis parking aid sensor bracket secures the sensor in the correct position within the bumper or trim opening so the parking assist system can retain proper alignment. It is a practical replacement for damaged, cracked, or missing sensor mounting points on Ram 1500 and Ram 1500 Classic models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBroken or missing parking sensor mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose sensor fitment after bumper repair\u003c\/li\u003e\n\u003cli\u003eSensor misalignment caused by impact damage\u003c\/li\u003e\n\u003cli\u003eService-related bracket removal that left the sensor unsupported\u003c\/li\u003e\n\u003cli\u003eParking aid trim opening that no longer holds the sensor securely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, model, and sensor position before installation. This part uses a clip-on attachment method and is designed for specified front or rear locations, so the replacement should be matched to the original bracket orientation on the vehicle. Compare the existing bracket shape and mounting points before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDorman designs this bracket as an OE-style replacement for the original parking aid sensor bracket on listed Ram applications. Part number 42446 is built to restore the original mounting function for the parking sensor assembly.\u003c\/p\u003e\u003cp\u003eThis part cross-references OE numbers 5LS52TZZAA and 5LT35ZZZAA for the same application.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":52118529310901,"sku":"BCZF-42446","price":27.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/MM_42446_Fro.jpg?v=1775162027"},{"product_id":"dorman-42448-parking-aid-sensor-bracket-rear","title":"Dorman 42448 Parking Aid Sensor Bracket - Rear","description":"\u003ch2\u003eParking Aid Sensor Bracket for Ford F-150\u003c\/h2\u003e\u003cp\u003eThis Dorman parking aid sensor bracket is a direct-fit replacement for specified Ford F-150 rear parking sensor locations. It restores the mounting point for the sensor when the original bracket is missing, cracked, or damaged during service.\u003c\/p\u003e\u003cp\u003eBuilt from black plastic and engineered for specific vehicle applications, Dorman 42448 is shaped to match the fit and function of the original bracket on the rear of the truck.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement parking aid sensor bracket for rear sensor mounting\u003c\/li\u003e\n\u003cli\u003eSpecific fit for 2015-2020 Ford F-150, rear\u003c\/li\u003e\n\u003cli\u003eBlack plastic construction\u003c\/li\u003e\n\u003cli\u003eClip-on attachment method\u003c\/li\u003e\n\u003cli\u003eDesigned to match original fit, function, and performance\u003c\/li\u003e\n\u003cli\u003eCompatible with rear left inner, rear left outer, rear right inner, and rear right outer locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eDorman 42448 is a parking aid sensor bracket engineered for the rear of the Ford F-150. It is designed to replace an original bracket that has been lost, damaged by impact, or removed during repair work. The bracket helps secure the parking sensor in the correct position so the system can maintain proper alignment at the rear bumper area. This part cross-references Ford OE numbers FL3Z15K861AA and FL3Z15K861AB for the same application.\u003c\/p\u003e\u003cp\u003eFits 2015-2020 Ford F-150, rear. Fits 2015-2020 Ford F-150, rear left inner. Fits 2015-2020 Ford F-150, rear left outer. Fits 2015-2020 Ford F-150, rear right inner. Fits 2015-2020 Ford F-150, rear right outer. Dorman 42448 is a practical replacement when you need a parking sensor bracket that matches the original mounting style and vehicle-specific dimensions.\u003c\/p\u003e\u003ch2\u003eCommon Problems It Can Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or missing rear parking sensor bracket\u003c\/li\u003e\n\u003cli\u003eLoose sensor mounting after bumper repair\u003c\/li\u003e\n\u003cli\u003eImproper sensor alignment caused by damaged bracket tabs\u003c\/li\u003e\n\u003cli\u003eReplacement after impact damage to the rear bumper area\u003c\/li\u003e\n\u003cli\u003eService-related removal of the original sensor bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the rear sensor location before installation and compare the bracket shape, clip style, and mounting dimensions to the original part. This bracket uses a clip-on attachment method and does not include mounting hardware. Confirm the vehicle position and sensor opening size before final assembly on the Ford F-150.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDorman designs this bracket as a vehicle-specific replacement that matches the original part’s fit, function, and performance for the listed Ford F-150 applications. Part number 42448 is built to support a clean, OE-style repair at the rear parking aid sensor mounting point.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":52118529376437,"sku":"BCZF-42448","price":29.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/MM_42448_Fro.jpg?v=1775162027"},{"product_id":"professional-parts-sweden-34438951-fog-light-bracket","title":"Professional Parts Sweden 34438951 Fog Light Bracket","description":"\u003ch2\u003eFog Light Bracket for Volvo XC90\u003c\/h2\u003e\u003cp\u003eThis fog light bracket from Professional Parts Sweden is made for vehicles with fog lights and fits Volvo XC90 models from 2007 to 2012. Use part number 34438951 when you need a direct replacement for the front fog lamp mounting point on the correct chassis range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFog light bracket for vehicles equipped with fog lamps\u003c\/li\u003e\n\u003cli\u003eFits Volvo XC90, 2007-2012\u003c\/li\u003e\n\u003cli\u003eBuilt for chassis numbers up to -628376\u003c\/li\u003e\n\u003cli\u003eOE-style replacement under Professional Parts Sweden part number 34438951\u003c\/li\u003e\n\u003cli\u003eCross-reference: 30678951\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eProfessional Parts Sweden 34438951 is a fog light bracket for the Volvo XC90, covering 2007-2012 applications with fog lamps and chassis numbers up to -628376. It is the correct type of mounting support when replacing a damaged or missing fog light bracket on the front lighting assembly. If you are searching for a Volvo XC90 fog light bracket 2007-2012 or a 34438951 replacement bracket, this part matches the listed vehicle equipment and fitment data.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting support\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp alignment after bracket damage\u003c\/li\u003e\n\u003cli\u003eMissing bracket from front-end repair work\u003c\/li\u003e\n\u003cli\u003eImproper fog light positioning in the bumper area\u003c\/li\u003e\n\u003cli\u003eRestoration of the fog lamp mounting point on a Volvo XC90\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the chassis number before ordering, since this part is listed for vehicles up to chassis no. -628376. Confirm that your Volvo XC90 is equipped with fog lights and compare the existing bracket to part number 34438951 before installation. Fitment is listed for 2007-2012 Volvo XC90 models with fog lamps.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eProfessional Parts Sweden supplies replacement components for automotive repair applications, and this bracket is cataloged with a direct interchange reference to 30678951 for the same application.\u003c\/p\u003e","brand":"Professional Parts Sweden","offers":[{"title":"Default Title","offer_id":52120650711221,"sku":"FNJW-34438951","price":102.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PS_34438951_Fro.jpg?v=1775162619"},{"product_id":"dorman-1592230-headlight-bracket-left","title":"Dorman 1592230 Headlight Bracket - Left","description":"\u003ch2\u003eHeadlight Bracket for Select GM Compact Cars\u003c\/h2\u003e\u003cp\u003eThis Dorman headlight bracket is built to match the fit and function of the original bracket on specified vehicles. It is made from quality materials for dependable performance and direct replacement use on the left side.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement headlight bracket for the left side\u003c\/li\u003e\n\u003cli\u003eMatches original fit and function on listed applications\u003c\/li\u003e\n\u003cli\u003eConstructed from quality materials for reliable service\u003c\/li\u003e\n\u003cli\u003eFits 2005-2010 Chevrolet Cobalt, left\u003c\/li\u003e\n\u003cli\u003eFits 2007-2010 Pontiac G5, left\u003c\/li\u003e\n\u003cli\u003eFits 2005-2006 Pontiac G4, left\u003c\/li\u003e\n\u003cli\u003eFits 2005-2006 Pontiac Pursuit, left\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Information\u003c\/h2\u003e\u003cp\u003eDorman 1592230 is a replacement headlight bracket for vehicles that use a left-side mounting point for the headlamp assembly. It is designed for Chevrolet Cobalt, Pontiac G5, Pontiac G4, and Pontiac Pursuit applications listed in the fitment data, helping restore proper headlight support and alignment. This part cross-references Eagle Eye GM364-BRACKETL for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp housing attachment\u003c\/li\u003e\n\u003cli\u003eMisaligned headlight assembly after front-end repair\u003c\/li\u003e\n\u003cli\u003eDamaged OE bracket from impact or vibration\u003c\/li\u003e\n\u003cli\u003eImproper headlight positioning on the driver side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify vehicle year, make, model, and left-side application before installation. Compare the original bracket to the replacement part and confirm mounting points and headlamp alignment before final assembly. For best results, inspect surrounding headlight components and body mounts for damage that could affect fit.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDorman 1592230 is engineered as an OE-style replacement using quality materials and fitment matched to the original part on specified vehicles. Interchanges include 1227-0160L and 15845985.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":52123081572533,"sku":"DWRT-1592230","price":51.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_1592230_Fro.jpg?v=1775162771"},{"product_id":"uro-2188800430-headlight-bracket-left-or-right","title":"URO 2188800430 Headlight Bracket - Left or Right","description":"\u003ch2\u003eMercedes-Benz Headlight Bracket Replacement\u003c\/h2\u003e\u003cp\u003eThis URO headlight bracket restores secure headlight mounting on select Mercedes-Benz models. It is built to OE dimensions for straightforward installation and correct factory headlight positioning.\u003c\/p\u003e\u003cp\u003eCompatible with Mercedes-Benz C-Class, CLS-Class, E-Class, and GLK-Class applications, this replacement bracket helps return damaged lighting assemblies to proper alignment. Part number 2188800430 is a direct-fit solution for left or right side applications listed below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOE-dimensioned replacement for factory headlight bracket fitment\u003c\/li\u003e\n\u003cli\u003eHeat- and weather-resistant materials for long-term service\u003c\/li\u003e\n\u003cli\u003eDirect replacement for damaged or broken original brackets\u003c\/li\u003e\n\u003cli\u003eSupports proper headlight positioning after repair\u003c\/li\u003e\n\u003cli\u003eURO part number 2188800430\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eURO 2188800430 is a headlight bracket made for Mercedes-Benz vehicles that need a replacement for a cracked, bent, or missing factory mounting point. By matching OE dimensions, it helps the headlamp assembly sit in the correct location so the front lighting system can be reassembled cleanly and securely. This part cross-references 218 880 0430 and 2048800130 for the same application.\u003c\/p\u003e\u003cp\u003eFits 2008-2014 Mercedes-Benz C300, left or right; 2008-2015 Mercedes-Benz C350, left or right; 2008-2015 Mercedes-Benz C63 AMG, left or right; 2010-2015 Mercedes-Benz E350, left or right; 2010-2015 Mercedes-Benz E550, left or right; 2010-2015 Mercedes-Benz E63 AMG, left or right; 2012-2015 Mercedes-Benz C250, left or right; 2012-2015 Mercedes-Benz CLS550, left or right; 2012-2014 Mercedes-Benz CLS63 AMG, left or right; 2013-2015 Mercedes-Benz E400, left or right; 2013-2015 Mercedes-Benz GLK250, left or right; 2010-2015 Mercedes-Benz GLK350, left or right.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken headlight mounting tab or bracket\u003c\/li\u003e\n\u003cli\u003eHeadlamp assembly sitting out of position\u003c\/li\u003e\n\u003cli\u003eLoose or unstable front lighting housing\u003c\/li\u003e\n\u003cli\u003eDamage from prior front-end repair\u003c\/li\u003e\n\u003cli\u003eMisalignment after headlight replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify side-specific placement before installation and compare the new bracket to the original part for alignment points. Confirm the headlight assembly seats correctly before final tightening so the lamp housing matches factory position on the vehicle.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eURO states this bracket is manufactured to OE dimensions and uses heat- and weather-resistant materials. It is backed by a 24-month unlimited mileage warranty.\u003c\/p\u003e","brand":"URO","offers":[{"title":"Default Title","offer_id":52130080882869,"sku":"DDWC-2188800430","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/UR_2188800430_Fro.jpg?v=1775163557"},{"product_id":"depo-330-1705l-ud-fog-light-bracket-left","title":"Depo 330-1705L-UD Fog Light Bracket - Left","description":"\u003ch2\u003eFord F-150 Left Fog Light Bracket\u003c\/h2\u003e\u003cp\u003eThis Depo fog light bracket is a direct-fit lighting support component for select 2011-2014 Ford F-150 models. It is built for the left side and matches OE reference FO2602102 and OEM BL3Z15266B for the listed application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2011-2014 Ford F-150, left\u003c\/li\u003e\n\u003cli\u003eDepo part number 330-1705L-UD\u003c\/li\u003e\n\u003cli\u003eFog light bracket for front lighting support\u003c\/li\u003e\n\u003cli\u003eOE reference: FO2602102\u003c\/li\u003e\n\u003cli\u003eOEM reference: BL3Z15266B\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eUse this fog light bracket to restore the mounting point for the left fog lamp on a 2011-2014 Ford F-150. Depo 330-1705L-UD is specified for the left position and cross-references the OE-style application identified by FO2602102 and BL3Z15266B. For Ford F-150 owners replacing a damaged front lighting bracket, this part provides the correct fitment reference for the listed years.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned left fog lamp\u003c\/li\u003e\n\u003cli\u003eMissing support after front-end repair\u003c\/li\u003e\n\u003cli\u003eImproper lamp positioning on the Ford F-150\u003c\/li\u003e\n\u003cli\u003eReplacement of a worn OE-style bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify left-side placement before installation and compare the existing bracket to the OE reference numbers listed above. Confirm the vehicle is a 2011-2014 Ford F-150 before ordering. Depo 330-1705L-UD is listed for the left position only.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo supplies replacement lighting and body components for OE-style applications, and this bracket is cataloged to match the listed Ford F-150 fitment and reference numbers.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":52142676639925,"sku":"DGKS-330-1705L-UD","price":32.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_3301705LUD_Fro.jpg?v=1775497212"},{"product_id":"techpro-bm2508103-headlight-bracket-left","title":"TechPro BM2508103 Headlight Bracket - Left","description":"\u003ch2\u003eBMW Left Headlight Bracket\u003c\/h2\u003e\u003cp\u003eRestore secure headlight mounting with this TechPro headlight bracket, part number BM2508103. It is engineered for sedan models and built for factory-style precision, helping maintain the original appearance and proper alignment on BMW 323i, 328i, 335d, and 335i applications.\u003c\/p\u003e\u003cp\u003eDesigned for direct replacement use, BM2508103 supports a clean installation without modifications. The bracket is made from high-quality materials for durability and long-term performance, making it a practical choice for BMW E90 and E91 left-side headlight repair.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngineered for sedan models for reliable compatibility\u003c\/li\u003e\n\u003cli\u003eFactory-style precision for accurate headlight positioning\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eMaintains a factory appearance after installation\u003c\/li\u003e\n\u003cli\u003eQuick, direct installation with no modifications required\u003c\/li\u003e\n\u003cli\u003eTechPro BM2508103 replacement part for left headlight mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro BM2508103 is a left headlight bracket for select BMW 3 Series sedan and wagon applications. It is built to match factory-style fitment for the left side and helps secure the headlight assembly in the correct position. This part cross-references OEM 51647138401 for the same application. For buyers searching for a BMW 328i left headlight bracket, BMW 335i headlight bracket replacement, or a BMW 323i left headlight support, BM2508103 provides a direct-fit solution focused on alignment, appearance, and dependable function.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left headlight mounting points\u003c\/li\u003e\n\u003cli\u003eLoose headlight alignment after front-end repair\u003c\/li\u003e\n\u003cli\u003eImproper lamp positioning that affects factory appearance\u003c\/li\u003e\n\u003cli\u003eReplacement needs for damaged BMW E90\/E91 headlight support hardware\u003c\/li\u003e\n\u003cli\u003eRestoration of secure headlight attachment on the left side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2009-2012 BMW 328i, left; Fits 2009-2011 BMW 323i, left; Fits 2009-2011 BMW 328i, left; Fits 2009-2011 BMW 335d, left; Fits 2009-2011 BMW 335i, left. Confirm the vehicle’s chassis and left-side headlight mounting points before installation. BM2508103 is intended for direct replacement use and installs with factory-style precision, so the original lamp position and surrounding body lines should be checked after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro manufactures this bracket with durable materials and OE-style fitment standards in mind. BM2508103 is built to support reliable function and long-term value while preserving a factory appearance on the vehicle.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52190881972405,"sku":"HYNX-BM2508103","price":46.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_BM2508103_Fro.jpg?v=1775593087"},{"product_id":"techpro-ch2602101-fog-light-bracket-left","title":"TechPro CH2602101 Fog Light Bracket - Left","description":"\u003ch2\u003eLeft Fog Light Bracket for Dodge Durango\u003c\/h2\u003e\u003cp\u003eRestore proper fog lamp mounting with this TechPro fog light bracket, part number CH2602101. It is built for factory-style precision and direct replacement performance on the left side of the vehicle.\u003c\/p\u003e\u003cp\u003eCompatible with 2011-2013 Dodge Durango, left, this bracket is made from high-quality materials for durable, long-term use and a clean OE-style appearance. TechPro CH2602101 installs quickly with no modifications required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit fog light bracket for the left side\u003c\/li\u003e\n\u003cli\u003eFactory-style precision for accurate alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality construction for lasting durability\u003c\/li\u003e\n\u003cli\u003eSupports reliable fog lamp mounting and stable fitment\u003c\/li\u003e\n\u003cli\u003eQuick installation with no modifications required\u003c\/li\u003e\n\u003cli\u003eOE cross-reference: 68089179AB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro CH2602101 is a left fog light bracket engineered for 2011-2013 Dodge Durango applications. It is designed to match factory mounting points and maintain the original appearance of the front lighting assembly. For buyers searching for a 2011 Dodge Durango left fog light bracket, a 2012 Dodge Durango fog lamp bracket, or a 2013 Dodge Durango OE replacement bracket, this part provides a direct-fit solution with consistent positioning and dependable support.\u003c\/p\u003e\u003cp\u003eThe bracket’s dimensions are 7.02 inches long, 4.29 inches wide, and 4.29 inches high, with a 1 lb weight. Those measurements support a precise replacement fit and help maintain proper fog light location on the vehicle. TechPro CH2602101 is also a practical match for drivers needing a Dodge Durango left fog light mounting bracket that installs cleanly and preserves factory appearance.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or missing left fog light mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp alignment at the front bumper\u003c\/li\u003e\n\u003cli\u003eImproper fit after collision or front-end repair\u003c\/li\u003e\n\u003cli\u003eFactory appearance issues around the fog light opening\u003c\/li\u003e\n\u003cli\u003eReplacement needs for OE part number 68089179AB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall TechPro CH2602101 on the left side of the 2011-2013 Dodge Durango using the factory-style mounting locations. No modifications are required. Verify the vehicle’s left-side fog light bracket application and compare the existing OE number 68089179AB before installation to confirm the correct match.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this fog light bracket with high-quality materials to support durable, long-term performance and a factory-style fit. The part is intended to deliver reliable function and consistent installation results for the specified Dodge Durango applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192029835445,"sku":"HYNX-CH2602101","price":37.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_CH2602101_Fro.jpg?v=1775593199"},{"product_id":"techpro-fo2508103-headlight-bracket-left","title":"TechPro FO2508103 Headlight Bracket - Left","description":"\u003ch2\u003eTechPro Headlight Bracket for Ford Escape\u003c\/h2\u003e\u003cp\u003eRestore secure headlight mounting on a 2013-2016 Ford Escape with this TechPro headlight bracket. Built for halogen and xenon applications, it is made to match factory-style fitment and appearance for the left side.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2013-2016 Ford Escape, left\u003c\/li\u003e\n\u003cli\u003eWorks with halogen and xenon headlamp setups\u003c\/li\u003e\n\u003cli\u003eFactory-style precision for accurate alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eQuick installation with no modifications required\u003c\/li\u003e\n\u003cli\u003eOE cross-reference: CJ5Z17C973A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Application\u003c\/h2\u003e\u003cp\u003eThis TechPro FO2508103 headlight bracket is made for the left side of the 2013, 2014, 2015, and 2016 Ford Escape. It supports halogen and xenon headlight configurations and helps maintain the original headlamp position and front-end appearance. If you are replacing a damaged Ford Escape headlight bracket, FO2508103 provides a direct-fit solution for the listed application.\u003c\/p\u003e\u003cp\u003eThis part cross-references CJ5Z17C973A for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems It Can Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left headlight mounting points\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front-end repair\u003c\/li\u003e\n\u003cli\u003eImproper headlight positioning on a Ford Escape\u003c\/li\u003e\n\u003cli\u003eLoss of factory appearance around the headlamp assembly\u003c\/li\u003e\n\u003cli\u003eFitment issues after replacing a damaged OE bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eInstall FO2508103 on the left side of the vehicle using factory-style mounting locations. The bracket is made for direct replacement and does not require modifications. Verify headlamp type and side before installation to confirm the correct application for your Ford Escape.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this headlight bracket with durable materials to support reliable function and lasting performance. FO2508103 is engineered for precise installation and a factory appearance on the 2013-2016 Ford Escape.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129614005,"sku":"HYNX-FO2508103","price":23.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2508103_Fro.jpg?v=1775593319"},{"product_id":"techpro-fo2508104-headlight-bracket-left","title":"TechPro FO2508104 Headlight Bracket - Left","description":"\u003ch2\u003eTechPro FO2508104 Headlight Bracket for Mustang\u003c\/h2\u003e\u003cp\u003eRestore proper headlight support and alignment with the TechPro FO2508104 headlight bracket. This left-side replacement is built for factory-style precision, durable performance, and a clean OE appearance on the vehicle.\u003c\/p\u003e\u003cp\u003eFits 2010-2014 Ford Mustang, left. This TechPro FO2508104 bracket is a direct-fit solution for owners searching for a left headlight bracket for Ford Mustang 2010-2014 models, with installation that does not require modifications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fitment for precise headlight mounting\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eMaintains a factory appearance after installation\u003c\/li\u003e\n\u003cli\u003eQuick, straightforward installation with no modifications required\u003c\/li\u003e\n\u003cli\u003eDirect replacement for OE part number AR3Z16153A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2508104 headlight bracket is made for the left side of 2010-2014 Ford Mustang applications. It supports accurate headlight positioning and helps maintain the original fit and finish expected from an OE-style replacement. For buyers comparing Ford Mustang left headlight bracket options, FO2508104 offers a direct replacement path with the correct mounting profile and dimensions for the application.\u003c\/p\u003e\u003cp\u003eMeasuring 2.73 inches high, 5.85 inches long, and 5.07 inches wide, this bracket is engineered for reliable function and long-term value. The compact 0.1 lb design helps keep the replacement lightweight while still providing the structural support needed for proper headlamp alignment. TechPro FO2508104 also cross-references OE part number AR3Z16153A for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front-end repair\u003c\/li\u003e\n\u003cli\u003eImproper headlight positioning on a Ford Mustang\u003c\/li\u003e\n\u003cli\u003eMissing OE-style support for the left headlight assembly\u003c\/li\u003e\n\u003cli\u003eVisible fitment mismatch after collision-related body work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 2010-2014 Ford Mustang and confirm left-side placement before installation. Compare the existing bracket to FO2508104 and OE reference AR3Z16153A to ensure the mounting points and shape match the original part. Because this bracket installs without modifications, it is suited for direct replacement during headlight or front-end repair work.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this headlight bracket with durable materials and factory-style precision to support dependable fit and long-term use. The part is intended to deliver consistent OE-style appearance and function for Mustang owners replacing a damaged left headlight bracket.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129646773,"sku":"HYNX-FO2508104","price":41.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2508104_Fro.jpg?v=1775593320"},{"product_id":"techpro-fo2509103-headlight-bracket-right","title":"TechPro FO2509103 Headlight Bracket - Right","description":"\u003ch2\u003eTechPro FO2509103 Headlight Bracket for Ford Escape\u003c\/h2\u003e\u003cp\u003eTechPro FO2509103 is a right headlight bracket for 2013-2016 Ford Escape models with halogen or xenon lighting. It is built for factory-style fitment, precise alignment, and a clean OE appearance on the vehicle front end.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2013-2016 Ford Escape, right\u003c\/li\u003e\n\u003cli\u003eWorks with halogen and xenon headlight setups\u003c\/li\u003e\n\u003cli\u003eFactory-style precision for accurate lamp positioning\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eQuick installation with no modifications required\u003c\/li\u003e\n\u003cli\u003eOE-style appearance for a proper front-end finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis TechPro headlight bracket, part number FO2509103, is made for the right side of the 2013-2016 Ford Escape. It supports secure headlamp mounting and helps maintain correct alignment for halogen and xenon applications. The bracket is designed to install with factory-style precision, making it a direct-fit solution for restoring the original look and function of the lighting assembly. This part cross-references Ford OEM CJ5Z17C972A for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked right headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eMisaligned headlamp after front-end damage\u003c\/li\u003e\n\u003cli\u003eLoose headlight assembly fitment\u003c\/li\u003e\n\u003cli\u003eRestoring OE-style headlight positioning on a Ford Escape\u003c\/li\u003e\n\u003cli\u003eReplacing a worn bracket during lighting repair work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2013-2016 Ford Escape, right. Verify halogen or xenon headlight configuration before installation. The bracket is designed for direct replacement and does not require modifications. Confirm the OE reference CJ5Z17C972A and compare the mounting points to the original part before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with materials selected for durability and lasting performance. The part is engineered to support reliable fitment and consistent function in everyday use.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129712309,"sku":"HYNX-FO2509103","price":15.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2509103_Fro.jpg?v=1775593320"},{"product_id":"techpro-fo2509104-headlight-bracket-right","title":"TechPro FO2509104 Headlight Bracket - Right","description":"\u003ch2\u003eFord Mustang Right Headlight Bracket\u003c\/h2\u003e\u003cp\u003eRestore secure headlight mounting with this TechPro headlight bracket for the right side of the 2010-2014 Ford Mustang. Built for factory-style precision, TechPro FO2509104 helps maintain proper alignment and a clean OE appearance while supporting reliable long-term function.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2010-2014 Ford Mustang, right\u003c\/li\u003e\n\u003cli\u003eFactory-style precision for accurate installation and alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eMaintains a factory appearance after replacement\u003c\/li\u003e\n\u003cli\u003eQuick, direct installation with no modifications required\u003c\/li\u003e\n\u003cli\u003eTechPro FO2509104 is sized at 2.73 in. H x 5.85 in. L x 5.07 in. W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro FO2509104 is a right headlight bracket made for the Ford Mustang from 2010 through 2014. It is engineered to match factory-style mounting points so the headlight assembly can be positioned correctly and secured with a clean, OE-like fit. For buyers searching for a 2010-2014 Ford Mustang right headlight bracket or a direct replacement for OEM AR3Z16152A, this part provides a straightforward solution for restoring proper front-end lighting support.\u003c\/p\u003e\u003cp\u003eThe bracket is built from durable materials to handle everyday use and help maintain stable headlight placement over time. Its direct-fit design supports a faster replacement process and helps reduce the need for adjustments during installation. TechPro FO2509104 also cross-references Ford OEM AR3Z16152A for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or damaged right headlight mounting support\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned headlight assembly positioning\u003c\/li\u003e\n\u003cli\u003eImproper fit after front-end repair work\u003c\/li\u003e\n\u003cli\u003eLoss of factory appearance around the headlamp area\u003c\/li\u003e\n\u003cli\u003eReplacement needs for a direct-fit Ford Mustang headlight bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2010-2014 Ford Mustang, right. Verify the original mounting points and compare the replacement bracket to the existing part before installation. Because this bracket is designed for factory-style precision, it installs without modifications when used on the listed application. Confirm the side and OEM reference AR3Z16152A before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro FO2509104 is built for dependable fit and lasting performance using high-quality materials. Its OE-style design supports consistent installation results and a factory appearance on the 2010-2014 Ford Mustang right-side headlight mounting location.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129745077,"sku":"HYNX-FO2509104","price":41.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2509104_Fro.jpg?v=1775593320"},{"product_id":"techpro-fo2509107-headlight-bracket-right","title":"TechPro FO2509107 Headlight Bracket - Right","description":"\u003ch2\u003eRight Headlight Bracket for Ford Explorer\u003c\/h2\u003e\u003cp\u003eRestore the front-end mounting point on your vehicle with this TechPro right headlight bracket. Built as a premium replacement for the Ford Explorer, it is made to match OEM fit and finish for a clean, factory-style result.\u003c\/p\u003e\u003cp\u003eFits 2016-2019 Ford Explorer, right. Part number FO2509107 is a direct-fit style solution for replacing a damaged or missing right headlamp bracket on Ford Explorer models with OEM reference FB5Z17C972A.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePremium replacement right headlamp bracket\u003c\/li\u003e\n\u003cli\u003eOEM-style fit and finish for the Ford Explorer\u003c\/li\u003e\n\u003cli\u003eFactory-style mounting support for the right side\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and long service life\u003c\/li\u003e\n\u003cli\u003eQuick installation with no modifications required\u003c\/li\u003e\n\u003cli\u003ePart number FO2509107 for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro FO2509107 is a right headlight bracket engineered for 2016-2019 Ford Explorer applications. It is built to restore proper headlamp mounting alignment and help return the front fascia to a seamless, factory-correct appearance. The bracket is tailored for mounting support and installs with factory-style precision, making it a practical replacement when the original bracket is cracked, broken, or no longer holds the lamp securely.\u003c\/p\u003e\u003cp\u003eThis part cross-references Ford OEM FB5Z17C972A for the same application. If you are searching for a 2016 Ford Explorer right headlight bracket, a 2017-2019 Ford Explorer headlamp mounting support, or FO2509107 replacement fitment, this part is built for that exact use case.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked right headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned headlamp assembly\u003c\/li\u003e\n\u003cli\u003eFront-end fitment issues after minor collision damage\u003c\/li\u003e\n\u003cli\u003eGaps or uneven alignment around the headlight area\u003c\/li\u003e\n\u003cli\u003eLoss of secure mounting support on the passenger-side front lamp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eInstall on the right side using factory-style mounting points. Verify the headlamp assembly and surrounding brackets are aligned before final tightening. No modifications are required for standard installation on listed Ford Explorer applications. Confirm vehicle year, model, and right-side placement before ordering FO2509107.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro manufactures this bracket as an OEM-style replacement with materials selected for durability and consistent fit. The design focuses on restoring proper mounting support and front-end appearance on the Ford Explorer while matching the original application reference.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129777845,"sku":"HYNX-FO2509107","price":32.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2509107_Fro.jpg?v=1775593321"},{"product_id":"techpro-fo2602104-fog-light-bracket-left","title":"TechPro FO2602104 Fog Light Bracket - Left","description":"\u003ch2\u003eTechPro Fog Light Bracket for Ford Fusion\u003c\/h2\u003e\u003cp\u003eRestore proper fog light mounting on your 2013-2016 Ford Fusion with this TechPro fog light bracket. Built for factory-style precision, it supports a clean OE appearance and direct-fit installation for the left side.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2013-2016 Ford Fusion, left\u003c\/li\u003e\n\u003cli\u003eDirect replacement for OEM part number DS7Z15266B\u003c\/li\u003e\n\u003cli\u003eInstalls with factory-style precision for accurate alignment\u003c\/li\u003e\n\u003cli\u003eMade from high-quality materials for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eSupports a factory appearance after repair or replacement\u003c\/li\u003e\n\u003cli\u003eQuick, no-modification installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eThe TechPro FO2602104 fog light bracket is engineered for the left side of the 2013-2016 Ford Fusion and cross-references OEM DS7Z15266B for the same application. It is designed to help secure the fog light assembly in the correct position, maintaining proper fit and a consistent front-end appearance. For buyers searching for a Ford Fusion left fog light bracket, FO2602104 provides a direct-fit replacement solution focused on alignment, durability, and dependable function.\u003c\/p\u003e\u003cp\u003eThis part is a practical choice when replacing a damaged or missing bracket on a Ford Fusion. The TechPro FO2602104 helps preserve the original mounting geometry so the fog light sits as intended and the vehicle retains a clean, factory-style look.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting points\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned fog light housing\u003c\/li\u003e\n\u003cli\u003eFront-end fitment issues after bumper repair\u003c\/li\u003e\n\u003cli\u003eLoss of factory appearance around the fog light area\u003c\/li\u003e\n\u003cli\u003eReplacement needs for a left-side Ford Fusion fog light bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall on the left side of 2013-2016 Ford Fusion models only. Verify bracket orientation and mounting points before final assembly. No modifications are required for proper fit when used on the listed application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket from high-quality materials to support lasting performance and reliable function. The FO2602104 is intended to deliver precise installation and a factory-style appearance for the specified Ford Fusion application.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129941685,"sku":"HYNX-FO2602104","price":27.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2602104_Fro.jpg?v=1775593322"},{"product_id":"techpro-fo2603100-fog-light-bracket-right","title":"TechPro FO2603100 Fog Light Bracket - Right","description":"\u003ch2\u003eRight Fog Light Bracket for Ford F-150\u003c\/h2\u003e\u003cp\u003eThis TechPro right fog light bracket is a premium replacement for restoring the front-end appearance and mounting support on a 2009-2010 Ford F-150. Built for factory-style precision, part number FO2603100 is made to match OEM fit and finish for a clean, direct replacement.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement right fog lamp bracket for Ford F-150 applications\u003c\/li\u003e\n\u003cli\u003eFactory-style fit and finish for accurate alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and long service life\u003c\/li\u003e\n\u003cli\u003eQuick, straightforward installation with no modifications required\u003c\/li\u003e\n\u003cli\u003eHelps restore the vehicle’s front-end appearance\u003c\/li\u003e\n\u003cli\u003eCross-reference: OEM 9L3Z15266A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro FO2603100 is a right fog light bracket engineered for 2009-2010 Ford F-150 models. It is built to match the original mounting profile and appearance, making it a practical choice when replacing a damaged or missing fog lamp bracket. The part number FO2603100 is intended for drivers who need a clean OE-style repair that supports proper lamp positioning and a seamless front fascia look.\u003c\/p\u003e\u003cp\u003eFits 2009-2010 Ford F-150, right. This fitment-specific replacement is suited for Ford F-150 front-end repairs where the original right fog lamp bracket has cracked, bent, or deteriorated.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked right fog light bracket\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned fog lamp mounting point\u003c\/li\u003e\n\u003cli\u003eFront bumper appearance issues after bracket damage\u003c\/li\u003e\n\u003cli\u003eImproper fog lamp positioning on a Ford F-150\u003c\/li\u003e\n\u003cli\u003eReplacement needs after collision or wear-related failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall FO2603100 in the factory right-side location on compatible 2009-2010 Ford F-150 models. The bracket is designed for direct replacement use and installs with factory-style precision, so no modifications are required. Verify the original part number and mounting location before installation to confirm the correct side.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro FO2603100 is built from high-quality materials to support durability and lasting performance. Its OE-style design focuses on fit, finish, and consistent replacement quality for Ford F-150 front-end repairs.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192129974453,"sku":"HYNX-FO2603100","price":34.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2603100_Fro.jpg?v=1775593322"},{"product_id":"techpro-fo2603104-fog-light-bracket-right","title":"TechPro FO2603104 Fog Light Bracket - Right","description":"\u003ch2\u003eFord Fusion Right Fog Light Bracket\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket is built for a precise factory-style fit on select Ford Fusion models. It supports reliable fog light mounting on the right side while helping maintain the original appearance of the front end.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style precision for accurate alignment\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eQuick, straightforward installation with no modifications required\u003c\/li\u003e\n\u003cli\u003eHelps restore proper fog light mounting and positioning\u003c\/li\u003e\n\u003cli\u003eMaintains a clean OEM appearance on the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eTechPro FO2603104 is a right fog light bracket for 2013-2016 Ford Fusion applications, including vehicles that use OEM reference DS7Z15266A. It is made to install with factory-style precision, helping the fog light assembly sit correctly and look original after replacement. This part cross-references Ford OE DS7Z15266A for the same application. FO2603104 is a practical choice when you need a direct-fit fog light bracket for a Ford Fusion right-side repair.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or damaged right fog light mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned fog light assembly\u003c\/li\u003e\n\u003cli\u003eRestoring factory-style front-end appearance\u003c\/li\u003e\n\u003cli\u003eReplacing a bracket affected by impact or wear\u003c\/li\u003e\n\u003cli\u003eCorrecting fitment issues after prior repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eCompatible with 2013-2016 Ford Fusion, right. Verify the OEM reference DS7Z15266A and match the vehicle side before installation. The bracket is engineered for direct replacement and does not require modifications.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro FO2603104 is manufactured with durable materials to support long-term performance and dependable fitment. Its factory-style construction helps deliver consistent installation and an OEM-like appearance.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52192130007221,"sku":"HYNX-FO2603104","price":29.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_FO2603104_Fro.jpg?v=1775593322"},{"product_id":"techpro-gm2508111-headlight-bracket-left","title":"TechPro GM2508111 Headlight Bracket - Left","description":"\u003ch2\u003eLeft Headlight Bracket for Chevrolet Sonic\u003c\/h2\u003e\u003cp\u003eTechPro GM2508111 is a left headlight bracket engineered for sedan models with bumper-mounted lighting support. Built for factory-style precision, it helps restore secure headlamp alignment on 2012-2016 Chevrolet Sonic applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2012-2016 Chevrolet Sonic, left\u003c\/li\u003e\n\u003cli\u003eBumper mounted design for the specified OE-style application\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality materials for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eFactory-style fitment supports accurate headlight positioning\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.42 lbs for straightforward handling during service\u003c\/li\u003e\n\u003cli\u003eDimensions: 19.11 in. length, 6.24 in. width, 4.68 in. height\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eThis TechPro headlight bracket, part number GM2508111, is made for the left side of the Chevrolet Sonic and matches the bumper-mounted configuration listed for OEM 95976852. It is intended for sedan models and is built to provide reliable support where the headlamp assembly needs stable mounting and consistent alignment. If you are replacing a damaged Chevrolet Sonic headlight bracket or restoring OE-style front-end fitment, GM2508111 offers a direct application for the listed vehicles.\u003c\/p\u003e\u003cp\u003eThis part cross-references OEM 95976852 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left headlight mounting support\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front bumper service\u003c\/li\u003e\n\u003cli\u003eImproper headlight positioning on a 2012-2016 Chevrolet Sonic\u003c\/li\u003e\n\u003cli\u003eReplacement for a damaged bumper-mounted bracket on the left side\u003c\/li\u003e\n\u003cli\u003eRestoration of factory-style front lighting support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 2012-2016 Chevrolet Sonic sedan with left-side, bumper-mounted headlight bracket requirements before installation. Compare the original bracket to GM2508111 and confirm OEM 95976852 interchange details for proper match-up. Test-fit the bracket and headlamp assembly before final tightening to ensure correct alignment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with high-quality materials to support durable, lasting service in the specified application. The part number GM2508111 is listed for direct replacement use on the confirmed Chevrolet Sonic fitment.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52194100969653,"sku":"HYNX-GM2508111","price":43.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_GM2508111_Fro.jpg?v=1775593536"},{"product_id":"techpro-gm2509117-headlight-bracket-right","title":"TechPro GM2509117 Headlight Bracket - Right","description":"\u003ch2\u003eOE-Style Right Headlight Bracket\u003c\/h2\u003e\u003cp\u003eThis TechPro headlight bracket is built for factory-style precision and reliable long-term function. It is a direct-fit right-side replacement for select Cadillac, Chevrolet, and GMC full-size SUVs and trucks, including applications such as the 2007-2014 Cadillac Escalade, 2007-2014 Chevrolet Tahoe, and 2007-2014 GMC Yukon.\u003c\/p\u003e\u003cp\u003ePart number GM2509117 is made with high-quality materials to support durable performance and consistent headlamp alignment. It is also cross-referenced to OEM 15874643 for the same application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fitment for the right headlight mounting location\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eSupports stable headlight positioning and secure mounting\u003c\/li\u003e\n\u003cli\u003eDirect replacement for vehicles using OEM reference 15874643\u003c\/li\u003e\n\u003cli\u003eTechPro GM2509117 for select Cadillac, Chevrolet, and GMC models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro GM2509117 is a right headlight bracket engineered for OE-style replacement on a wide range of GM vehicles. Compatible applications include the 2007-2014 Cadillac Escalade, 2007-2014 Cadillac Escalade ESV, 2007-2014 Chevrolet Suburban 1500, 2007-2014 Chevrolet Tahoe, 2007-2014 GMC Yukon, and 2007-2014 GMC Yukon XL 1500, along with 2007-2013 Cadillac Escalade EXT, 2007-2013 Chevrolet Avalanche, and 2007-2013 Chevrolet Suburban 2500. With dimensions of 12.48 inches long, 11.31 inches wide, and 7.8 inches high, this bracket is built to match the intended mounting geometry for proper headlight support.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked right headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front-end repair\u003c\/li\u003e\n\u003cli\u003eImproperly supported headlight assembly\u003c\/li\u003e\n\u003cli\u003eOEM bracket replacement needs on GM full-size SUVs and trucks\u003c\/li\u003e\n\u003cli\u003eFitment issues tied to damaged factory bracket hardware points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s right-side headlight bracket application before installation and compare the OEM reference 15874643 to confirm fitment. Check surrounding headlamp mounting points for damage before installing the replacement bracket. For best results, test-fit the bracket and headlight assembly before final assembly on the vehicle.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with factory-style precision and durable materials to support dependable performance over time. Part number GM2509117 is intended as a direct replacement for the listed GM applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52194101461173,"sku":"HYNX-GM2509117","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_GM2509117_Fro.jpg?v=1775593537"},{"product_id":"techpro-ho2509106-headlight-bracket-right","title":"TechPro HO2509106 Headlight Bracket - Right","description":"\u003ch2\u003eTechPro HO2509106 Headlight Bracket for Accord\u003c\/h2\u003e\u003cp\u003eTechPro HO2509106 is a right headlight bracket engineered for 2008-2012 Honda Accord sedan models. Built for factory-style precision, it supports reliable headlamp alignment and long-term durability in a direct replacement application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2008-2012 Honda Accord, right side lower headlight bracket application\u003c\/li\u003e\n\u003cli\u003eEngineered for sedan models for reliable compatibility\u003c\/li\u003e\n\u003cli\u003eInstalls with factory-style precision for accurate positioning\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003ePart number HO2509106 for easy identification and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis TechPro headlight bracket is built for the right lower mounting location on 2008-2012 Honda Accord sedan models. It helps restore secure headlamp support and proper alignment when the original bracket is damaged, cracked, or no longer holds the lamp assembly correctly. The HO2509106 replacement is designed to match factory-style fitment for a clean installation and dependable function. This part cross-references Honda OE number 06100TA0A11 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked right headlight mounting bracket on a Honda Accord\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front-end body repair\u003c\/li\u003e\n\u003cli\u003eImproper lamp positioning caused by damaged lower support points\u003c\/li\u003e\n\u003cli\u003eReplacement for worn OE bracket 06100TA0A11\u003c\/li\u003e\n\u003cli\u003eRestoring secure headlight attachment on 2008-2012 Accord sedan models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 2008-2012 Honda Accord sedan and confirm the right-side lower mounting location before installation. Compare the original bracket and mounting points to ensure the replacement matches the existing headlamp assembly. HO2509106 is intended for factory-style replacement use, so careful alignment during installation helps maintain proper lamp fit and panel spacing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro manufactures this bracket with durable materials and OE-style fitment standards to support consistent performance in daily use. The part number HO2509106 and OE cross-reference 06100TA0A11 help confirm application accuracy for the listed Honda Accord models.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52194225520821,"sku":"HYNX-HO2509106","price":26.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_HO2509106_Fro.jpg?v=1775593625"},{"product_id":"techpro-ho2603101-fog-light-bracket-right","title":"TechPro HO2603101 Fog Light Bracket - Right","description":"\u003ch2\u003eRight Fog Light Bracket for 2012 Honda Civic\u003c\/h2\u003e\u003cp\u003eReplace a damaged or missing fog light mounting point with this TechPro fog light bracket for the right side of the 2012 Honda Civic. Built for factory-style fitment, HO2603101 is made to support reliable alignment and long-term durability in a direct replacement application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngineered for sedan models for reliable compatibility\u003c\/li\u003e\n\u003cli\u003eFactory-style precision for consistent mounting alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the right-side fog light bracket\u003c\/li\u003e\n\u003cli\u003eCross-reference: 71116TR0A00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eTechPro HO2603101 is a right fog light bracket designed for the 2012 Honda Civic. It is built to match the original mounting location and support proper fog light positioning on the passenger-side front end. If you are searching for a 2012 Honda Civic right fog light bracket, Honda Civic fog light bracket replacement, or HO2603101 fog light bracket for Honda Civic, this part provides the fitment-focused solution needed for a clean repair.\u003c\/p\u003e\u003cp\u003eThis part cross-references 71116TR0A00 for the same application. The bracket is intended for direct replacement use where the original mounting tab or support has been damaged, bent, or worn.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose fog light housing on the right side\u003c\/li\u003e\n\u003cli\u003eMisaligned fog light after front-end repair\u003c\/li\u003e\n\u003cli\u003eMissing OEM-style support for the fog lamp assembly\u003c\/li\u003e\n\u003cli\u003eRestoring proper fit after bumper or fascia service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2012 Honda Civic, right. Verify the original part number and mounting location before installation. Compare the bracket to the existing fog light support to confirm alignment with the right-side assembly. For best results, inspect adjacent bumper and lamp mounting points for damage before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro HO2603101 is built with durable materials and factory-style precision to support dependable fit and function in the specified application. It is designed as a direct replacement for the OEM reference 71116TR0A00.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52194225553589,"sku":"HYNX-HO2603101","price":25.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_HO2603101_Fro.jpg?v=1775593625"},{"product_id":"techpro-in2508100-headlight-bracket-left","title":"TechPro IN2508100 Headlight Bracket - Left","description":"\u003ch2\u003eHeadlight Bracket for Infiniti G-Series Left Side\u003c\/h2\u003e\u003cp\u003eRestore secure headlamp mounting with this TechPro headlight bracket, engineered for sedan models and built for factory-style precision. It is made for reliable compatibility on select Infiniti G35, G25, and G37 applications, with durable materials chosen for long-term performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngineered for sedan models for reliable compatibility\u003c\/li\u003e\n\u003cli\u003eInstalls with factory-style precision\u003c\/li\u003e\n\u003cli\u003eBuilt with high-quality materials for durability\u003c\/li\u003e\n\u003cli\u003eSupports lasting performance and consistent headlight alignment\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for left-side applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Application\u003c\/h2\u003e\u003cp\u003eCompatible with 2009-2013 Infiniti G37, left; 2011-2012 Infiniti G25, left; and 2007-2008 Infiniti G35, left. This TechPro IN2508100 headlight bracket matches OEM reference 62561JK00A for the listed applications. This part cross-references 62561JK00A for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left headlight mounting points\u003c\/li\u003e\n\u003cli\u003eLoose headlamp positioning after front-end repair\u003c\/li\u003e\n\u003cli\u003eMisalignment that affects beam aim and panel fit\u003c\/li\u003e\n\u003cli\u003eReplacement needs after collision damage\u003c\/li\u003e\n\u003cli\u003eWear-related loss of secure headlight support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, model, and left-side application before installation. Compare the original bracket to the replacement part and confirm OEM reference 62561JK00A. For best results, test-fit the bracket and headlight assembly before final tightening to confirm proper alignment on the Infiniti G37, G25, or G35.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this IN2508100 bracket with high-quality materials to support durable, long-term service in the listed Infiniti applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52196233478325,"sku":"HYNX-IN2508100","price":52.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_IN2508100_Fro.jpg?v=1775593708"},{"product_id":"techpro-lx2602106-fog-light-bracket-left","title":"TechPro LX2602106 Fog Light Bracket - Left","description":"\u003ch2\u003eTechPro LX2602106 Fog Light Bracket\u003c\/h2\u003e\u003cp\u003eTechPro LX2602106 is a left fog light bracket built for factory-style precision and dependable fitment. It is made with high-quality materials for durability and long-term performance on select Lexus RX applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fit for accurate alignment\u003c\/li\u003e\n\u003cli\u003eDurable construction for lasting performance\u003c\/li\u003e\n\u003cli\u003eLeft-side fog light bracket application\u003c\/li\u003e\n\u003cli\u003eDesigned for reliable function and long-term value\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.9 in H x 12.87 in L x 9.36 in W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket, part number LX2602106, is a direct-fit body and lighting support component for the left side of select Lexus RX models. It is engineered to match factory-style mounting and positioning, helping restore proper fog light support on 2016-2019 Lexus RX350, 2018-2019 Lexus RX350L, and 2016-2019 Lexus RX450h applications. The part number LX2602106 also cross-references OEM 521260E041 for the same application.\u003c\/p\u003e\u003cp\u003eCompatible With 2016-2019 Lexus RX350, left; 2018-2019 Lexus RX350L, left; and 2016-2019 Lexus RX450h, left. This bracket supports a clean, secure installation point for the fog light assembly and helps maintain correct front-end component alignment on Lexus RX350 and Lexus RX450h vehicles.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left fog light bracket\u003c\/li\u003e\n\u003cli\u003eLoose fog light mounting point\u003c\/li\u003e\n\u003cli\u003eMisaligned fog light assembly after front-end repair\u003c\/li\u003e\n\u003cli\u003eReplacement needs for OEM 521260E041 applications\u003c\/li\u003e\n\u003cli\u003eRestoration of proper support on Lexus RX front lighting components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify vehicle year, model, and left-side fitment before installation. Compare the original bracket to TechPro LX2602106 to confirm mounting points and overall shape match the existing assembly. For best results, inspect surrounding lighting and body components for damage that could affect alignment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with high-quality materials and factory-style precision to support durable, long-term use. The design focuses on dependable fit and consistent performance for the specified Lexus RX applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52196244848821,"sku":"HYNX-LX2602106","price":34.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_LX2602106_Fro.jpg?v=1775593771"},{"product_id":"techpro-ni2509103-headlight-bracket-right","title":"TechPro NI2509103 Headlight Bracket - Right","description":"\u003ch2\u003eOE-Style Headlight Bracket for Nissan Frontier and Pathfinder\u003c\/h2\u003e\u003cp\u003eRestore secure headlight mounting with this TechPro headlight bracket, part number NI2509103. Built for factory-style precision and made from high-quality materials, it supports dependable fitment and long-term performance on the right side of the vehicle.\u003c\/p\u003e\u003cp\u003eCompatible with select Nissan Frontier and Nissan Pathfinder applications, NI2509103 is a direct-fit style replacement for lower headlight bracket service where the original mounting point has been damaged or worn.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style precision for accurate alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality material construction for durability\u003c\/li\u003e\n\u003cli\u003eRight-side lower headlight bracket application\u003c\/li\u003e\n\u003cli\u003eOE cross-reference: 26040ZL50A\u003c\/li\u003e\n\u003cli\u003eTechPro NI2509103 for targeted replacement fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro NI2509103 is a right lower headlight bracket engineered for select Nissan body and lighting repairs. It fits 2009-2021 Nissan Frontier, right lower, and 2009-2012 Nissan Pathfinder, right lower, from 4-09. This bracket helps restore the original headlamp mounting position so the assembly sits correctly and remains supported during normal driving conditions.\u003c\/p\u003e\u003cp\u003eWith dimensions of 6.7 inches high, 7.5 inches long, and 3.5 inches wide, this bracket is sized for the specified application and built to deliver reliable function. If you are searching for a Nissan Frontier right lower headlight bracket or a Nissan Pathfinder right lower headlight bracket, NI2509103 provides the OE-style replacement path for the listed vehicles.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked headlight mounting points\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned headlamp positioning\u003c\/li\u003e\n\u003cli\u003eImproper support after front-end body repair\u003c\/li\u003e\n\u003cli\u003eFitment issues caused by a damaged OE bracket\u003c\/li\u003e\n\u003cli\u003eRestoration of the right lower headlight attachment area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, model, and right-side lower mounting location before installation. Confirm the OE reference 26040ZL50A and compare the existing bracket shape and mounting points to the replacement part. For best results, inspect surrounding lighting and body components for damage that could affect alignment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with high-quality materials and factory-style precision to support durable, consistent performance in the specified Nissan Frontier and Pathfinder applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52198134481077,"sku":"HYNX-NI2509103","price":24.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2509103_Fro.jpg?v=1775593963"},{"product_id":"techpro-ni2602101-fog-light-bracket-left","title":"TechPro NI2602101 Fog Light Bracket - Left","description":"\u003ch2\u003eTechPro Fog Light Bracket for Nissan Sentra\u003c\/h2\u003e\u003cp\u003eRestore proper fog light mounting with this TechPro fog light bracket, part number NI2602101. It is built for factory-style precision and made from high-quality materials for durable, long-term performance on the road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fitment for accurate fog light bracket replacement\u003c\/li\u003e\n\u003cli\u003eHigh-quality construction for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eDirect replacement for OEM part number 26916ET80A\u003c\/li\u003e\n\u003cli\u003eFits 2007-2012 Nissan Sentra, left\u003c\/li\u003e\n\u003cli\u003eTechPro NI2602101 for service and repair applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro NI2602101 is a left fog light bracket for the 2007-2012 Nissan Sentra. It is engineered to match factory mounting points and support reliable fog light positioning, helping maintain proper alignment and secure attachment. For buyers searching for a Nissan Sentra left fog light bracket or an OEM replacement for 26916ET80A, this part provides a direct-fit solution with a focus on consistent fit and long-term value. This part cross-references OEM 26916ET80A for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light bracket mounting points\u003c\/li\u003e\n\u003cli\u003eLoose fog light alignment on the left side\u003c\/li\u003e\n\u003cli\u003eImproper lamp positioning after front-end repair\u003c\/li\u003e\n\u003cli\u003eReplacement needs for a damaged Nissan Sentra fog light bracket\u003c\/li\u003e\n\u003cli\u003eOEM bracket wear that affects secure lamp support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2007-2012 Nissan Sentra, left. Confirm the OEM reference 26916ET80A and verify left-side placement before installation. Compare the bracket to the original part to ensure the mounting shape and dimensions match the vehicle’s existing fog light location. Part number NI2602101 is intended for direct replacement use on the specified application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with materials selected for durability and dependable service life. The factory-style design supports accurate fitment on the Nissan Sentra platform and helps maintain consistent performance in routine repair work.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52198134710453,"sku":"HYNX-NI2602101","price":25.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602101_Fro.jpg?v=1775593963"},{"product_id":"techpro-to2602102-fog-light-bracket-left","title":"TechPro TO2602102 Fog Light Bracket - Left","description":"\u003ch2\u003eTechPro Fog Light Bracket for Toyota Sequoia\u003c\/h2\u003e\u003cp\u003eRestore secure fog light mounting on your Toyota Sequoia with this TechPro fog light bracket. Built for factory-style precision, part number TO2602102 is made to match the original mounting location and support dependable long-term performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fitment for accurate alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the left-side fog light bracket\u003c\/li\u003e\n\u003cli\u003eOE cross-reference: 521260C040\u003c\/li\u003e\n\u003cli\u003eTechPro TO2602102 for a precise replacement solution\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket is a direct-fit replacement for the left side on 2008-2017 Toyota Sequoia models. It is engineered to install with factory-style precision and maintain the correct position for the fog light assembly. The compact bracket measures 4.7 inches high, 7.8 inches long, and 4.7 inches wide, with a lightweight 0.31 lb design that supports straightforward handling during replacement. If you are searching for a Toyota Sequoia left fog light bracket or an OE-style replacement for part number TO2602102, this component matches the application and reference number 521260C040.\u003c\/p\u003e\u003cp\u003eTechPro TO2602102 is a practical choice for drivers and repair shops replacing a damaged or missing fog light bracket on the Toyota Sequoia. It supports proper lamp positioning and helps maintain the original front-end fit and finish.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left fog light bracket\u003c\/li\u003e\n\u003cli\u003eLoose fog light mounting on a Toyota Sequoia\u003c\/li\u003e\n\u003cli\u003eMisaligned fog lamp position after front-end repair\u003c\/li\u003e\n\u003cli\u003eReplacement needs for OE part number 521260C040\u003c\/li\u003e\n\u003cli\u003eRestoration of factory-style front lighting support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2008-2017 Toyota Sequoia, left. Confirm the left-side mounting location and compare the original bracket before installation. Verify alignment with the fog light housing and surrounding front-end components to ensure a proper factory-style fit. Part number TO2602102 is the reference to match when ordering or cross-checking the replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with high-quality materials and factory-style precision to support durability and lasting performance. This part cross-references OE application 521260C040 for the same Toyota Sequoia left-side use.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52203134484661,"sku":"HYNX-TO2602102","price":36.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_TO2602102_Fro.jpg?v=1775594191"},{"product_id":"techpro-ho2508106-headlight-bracket-left","title":"TechPro HO2508106 Headlight Bracket - Left","description":"\u003ch2\u003eTechPro HO2508106 Left Headlight Bracket for Accord\u003c\/h2\u003e\u003cp\u003eRestore the front-end mounting point on your vehicle with this TechPro left headlamp bracket. Built for 2008-2012 Honda Accord sedan applications, HO2508106 is made to match OEM fit and finish for a clean, factory-style repair.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePremium replacement left headlamp bracket for OEM-style alignment\u003c\/li\u003e\n\u003cli\u003eFits 2008-2012 Honda Accord, left lower position\u003c\/li\u003e\n\u003cli\u003eEngineered for sedan models for direct compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials support durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eFactory-style precision helps maintain proper headlight mounting and appearance\u003c\/li\u003e\n\u003cli\u003eQuick installation with no modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro HO2508106 is a replacement headlight bracket designed for the left side of 2008-2012 Honda Accord sedan models. It is tailored for the lower mounting location and built to replicate the original bracket’s fit and finish, helping restore secure headlamp support and a consistent front-end appearance. If you are replacing a damaged or missing bracket on a Honda Accord, HO2508106 provides a direct-fit solution for the left headlamp area.\u003c\/p\u003e\u003cp\u003eThis part cross-references Honda OEM 06150TA0A11 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked left headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned headlamp assembly\u003c\/li\u003e\n\u003cli\u003eFront-end fitment issues after minor collision repair\u003c\/li\u003e\n\u003cli\u003eGaps or uneven alignment around the headlight area\u003c\/li\u003e\n\u003cli\u003eLoss of factory appearance at the left front corner\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2008-2012 Honda Accord, left lower. Verify the original mounting points and headlamp position before installation. The bracket is designed for factory-style precision, so it installs without modifications when used on the listed application. Confirm the OEM reference 06150TA0A11 and the vehicle’s left-side lower bracket location before beginning the repair.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro HO2508106 is built with durable materials and manufactured to match OEM fit and finish for the listed Honda Accord applications. It is intended to support a clean, reliable repair that restores proper headlamp mounting and front-end appearance.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52207605088437,"sku":"HYNX-HO2508106","price":29.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_HO2508106_Fro.jpg?v=1775593625"},{"product_id":"depo-32-a34-1103r1ud-headlight-bracket-right","title":"Depo 32-A34-1103R1UD Headlight Bracket - Right","description":"\u003ch2\u003eRight Headlight Bracket for Ram 1500\u003c\/h2\u003e\u003cp\u003eThis Depo headlight bracket is a direct-fit lighting support component for the right side of the vehicle. It is listed for 2020-2024 Ram 1500 applications with OEM reference 68432394AA, making it a focused replacement for damaged or missing headlamp mounting support. Part number 32-A34-1103R1UD is a practical choice when restoring proper headlight alignment on a Ram 1500.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Depo\u003c\/li\u003e\n\u003cli\u003ePart number: 32-A34-1103R1UD\u003c\/li\u003e\n\u003cli\u003eHeadlight bracket for the right side\u003c\/li\u003e\n\u003cli\u003eFits 2020-2024 Ram 1500, right\u003c\/li\u003e\n\u003cli\u003eOEM reference: 68432394AA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eBuilt for the lighting and body bracket category, this headlight bracket supports the headlamp assembly on the passenger side of the Ram 1500. It is a fitment-based replacement for 2020, 2021, 2022, 2023, and 2024 Ram 1500 models and is identified by part number 32-A34-1103R1UD. If you are searching for a right headlight bracket for Ram 1500 2020-2024 or an OEM 68432394AA replacement, this part matches that application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked headlight mounting points\u003c\/li\u003e\n\u003cli\u003eLoose headlamp positioning on the right side\u003c\/li\u003e\n\u003cli\u003eMisalignment after front-end body repair\u003c\/li\u003e\n\u003cli\u003eMissing bracket support for the headlight assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the OEM reference and side before ordering. Compare the existing bracket to the replacement part to confirm mounting points and headlamp support shape. For best results, inspect adjacent lighting and body components for damage that could affect alignment after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDepo supplies replacement lighting and body components for vehicle-specific applications. Part number 32-A34-1103R1UD is cataloged for the right side on 2020-2024 Ram 1500 models and cross-references OEM 68432394AA for the same application.\u003c\/p\u003e","brand":"Depo","offers":[{"title":"Default Title","offer_id":52231096991925,"sku":"DGKS-32-A34-1103R1UD","price":73.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/7D_32A341103R1UD_Fro.jpg?v=1775666299"},{"product_id":"techpro-ni2508100-headlight-bracket-left","title":"TechPro NI2508100 Headlight Bracket - Left","description":"\u003ch2\u003eTechPro Headlight Bracket for Nissan Versa\u003c\/h2\u003e\u003cp\u003eRestore secure headlight mounting with this TechPro headlight bracket, part number NI2508100. It is engineered for sedan models and built for factory-style precision, making it a direct-fit solution for 2015-2017 Nissan Versa left lower applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2015-2017 Nissan Versa, left lower headlight mounting position\u003c\/li\u003e\n\u003cli\u003eFactory-style fitment supports accurate alignment during replacement\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eDesigned for reliable compatibility on sedan models\u003c\/li\u003e\n\u003cli\u003eTechPro NI2508100 supports long-term value in body repair work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe TechPro NI2508100 headlight bracket is a replacement body component for the left lower headlight mounting area on 2015-2017 Nissan Versa sedan models. It helps secure the headlamp assembly in the correct position so the front end can be reassembled with proper alignment and stable support. If you are replacing a damaged bracket after collision repair or addressing broken mounting points, this part provides a direct-fit option for the Nissan Versa.\u003c\/p\u003e\u003cp\u003eThis part cross-references OEM number 260929KK0A for the same application. TechPro NI2508100 is intended for repair jobs where accurate fit and dependable mounting matter, especially when working on a Nissan Versa left-side headlight assembly.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp alignment after front-end damage\u003c\/li\u003e\n\u003cli\u003eMissing support at the left lower headlight area\u003c\/li\u003e\n\u003cli\u003eImproper headlight positioning during body repair\u003c\/li\u003e\n\u003cli\u003eRestoring secure attachment on a 2015-2017 Nissan Versa\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, make, model, and left lower mounting location before installation. Compare the existing bracket and mounting points to the OEM reference 260929KK0A to confirm correct application. Test-fit the headlight assembly before final reassembly to ensure proper alignment on the Nissan Versa.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with durable materials and factory-style precision to support consistent fitment and dependable performance in body repair applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692511925,"sku":"HYNX-NI2508100","price":25.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2508100_Fro.jpg?v=1781716056"},{"product_id":"techpro-ni2508101-headlight-bracket-left","title":"TechPro NI2508101 Headlight Bracket - Left","description":"\u003ch2\u003eHeadlight Bracket for Nissan Frontier, Xterra, and Pathfinder\u003c\/h2\u003e\u003cp\u003eRestore secure headlamp mounting with this TechPro headlight bracket, part number NI2508101. Built for the left upper position, it matches the OE application used on select Nissan Frontier, Xterra, and Pathfinder models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTechPro headlight bracket for the left upper headlamp mounting point\u003c\/li\u003e\n\u003cli\u003eDimensions: 2.4 in. height, 3.9 in. length, 2.4 in. width\u003c\/li\u003e\n\u003cli\u003eLightweight design at 0.09 lbs for direct replacement use\u003c\/li\u003e\n\u003cli\u003eCross-reference part number: 26092EA000\u003c\/li\u003e\n\u003cli\u003ePart number NI2508101 for fitment verification and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2005-2021 Nissan Frontier, left upper.\u003c\/li\u003e\n\u003cli\u003eFits 2005-2015 Nissan Xterra, left upper.\u003c\/li\u003e\n\u003cli\u003eFits 2005-2012 Nissan Pathfinder, left upper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eTechPro NI2508101 is a headlight bracket engineered for the left upper mounting location on select Nissan vehicles. Its compact 2.4 x 3.9 x 2.4 inch profile supports proper headlamp alignment and secure attachment in applications where the original bracket has cracked, bent, or deteriorated. Use NI2508101 when replacing the OE-style bracket referenced by 26092EA000 on Nissan Frontier, Nissan Xterra, and Nissan Pathfinder models.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or missing left upper headlight mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose headlamp assembly caused by damaged support points\u003c\/li\u003e\n\u003cli\u003eMisaligned headlight housing after front-end repair\u003c\/li\u003e\n\u003cli\u003eReplacement for OE bracket 26092EA000 on listed Nissan applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, model, and left upper mounting position before installation. Compare the original bracket to NI2508101 to confirm shape, mounting points, and dimensions. Inspect surrounding headlamp tabs and support structure for damage before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro NI2508101 is cataloged as a direct-fit replacement headlight bracket for the specified Nissan applications. Confirm fitment against the OE reference 26092EA000 and the vehicle’s existing mounting location before installation.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692544693,"sku":"HYNX-NI2508101","price":20.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2508101_FRO.jpg?v=1781716063"},{"product_id":"techpro-ni2602102-fog-light-bracket-left","title":"TechPro NI2602102 Fog Light Bracket - Left","description":"\u003ch2\u003eFog Light Bracket for Nissan Rogue\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket is built for a factory-style fit on the left side of the vehicle. It is made for 2017-2020 Nissan Rogue applications with Japan Built\/Korea Built notes, and it supports reliable fog light mounting with durable construction and consistent alignment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2017-2020 Nissan Rogue, left\u003c\/li\u003e\n\u003cli\u003eOE-style replacement for Nissan Rogue fog light mounting\u003c\/li\u003e\n\u003cli\u003eFactory-style precision for proper bracket alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003ePart number NI2602102 for direct reference and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eTechPro NI2602102 is a left fog light bracket for the Nissan Rogue, engineered to match factory-style mounting requirements. With dimensions of 3.51 inches high, 10.34 inches long, and 3.9 inches wide, this bracket is sized for a precise fit in the front lighting assembly. It is a practical replacement for vehicles needing a stable fog lamp support on the left side, and it cross-references OEM part number 269156FP0A for the same application. Use NI2602102 when you need a replacement fog light bracket for a 2017-2020 Nissan Rogue, left side, with Japan Built\/Korea Built notes.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light bracket mounting points\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp alignment on the left side\u003c\/li\u003e\n\u003cli\u003eImproper fit after front-end repair work\u003c\/li\u003e\n\u003cli\u003eMissing or damaged OE-style support for the fog light assembly\u003c\/li\u003e\n\u003cli\u003eRestoring secure attachment on a Nissan Rogue fog light bracket replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle is a 2017-2020 Nissan Rogue with Japan Built\/Korea Built fitment before ordering. Verify left-side placement and compare the existing bracket to NI2602102 and OEM reference 269156FP0A before installation. Check surrounding lighting components and mounting points for damage so the replacement bracket seats correctly and supports proper fog light positioning.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this fog light bracket with high-quality materials and factory-style precision to support durable, long-term performance. The part is intended as a direct replacement for the specified Nissan Rogue application and is referenced to OEM part number 269156FP0A.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692675765,"sku":"HYNX-NI2602102","price":28.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602102_FRO.jpg?v=1781716091"},{"product_id":"techpro-ni2602104-fog-light-bracket-left","title":"TechPro NI2602104 Fog Light Bracket - Left","description":"\u003ch2\u003eFog Light Bracket for Nissan Juke\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket is built for factory-style precision and reliable long-term function. It is a direct-fit replacement for the left side on select Nissan Juke models, with dimensions and construction focused on consistent mounting and durability.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fitment for accurate alignment\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality materials for durability\u003c\/li\u003e\n\u003cli\u003eSupports dependable fog light mounting and stable positioning\u003c\/li\u003e\n\u003cli\u003eCompact design with a 5.5 in. height, 7.8 in. length, and 5.5 in. width\u003c\/li\u003e\n\u003cli\u003eLightweight construction at 0.5 lb for straightforward handling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eTechPro NI2602104 is a left fog light bracket made for 2011-2014 Nissan Juke applications. It cross-references Nissan 269151KA0A for the same application. For buyers searching for a 2011 Nissan Juke left fog light bracket, a 2014 Nissan Juke fog light bracket, or TechPro NI2602104 replacement fitment, this part provides an OE-style mounting solution that helps restore proper lamp support and alignment.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or damaged left fog light mounting points\u003c\/li\u003e\n\u003cli\u003eLoose or misaligned fog lamp positioning\u003c\/li\u003e\n\u003cli\u003eReplacement needs after front-end repair\u003c\/li\u003e\n\u003cli\u003eFitment issues caused by worn or missing bracket hardware locations\u003c\/li\u003e\n\u003cli\u003eRestoring proper support for the fog light assembly on a Nissan Juke\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall on the left side only and verify the vehicle matches the listed 2011-2014 Nissan Juke fitment before ordering. Compare the original bracket to the replacement part and confirm OEM reference 269151KA0A for application matching. Professional installation is recommended when front fascia components or lamp assemblies require removal for access.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with high-quality materials and factory-style precision to support durable, consistent performance. The part is engineered for reliable function and long-term value in OE-style replacement use.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692708533,"sku":"HYNX-NI2602104","price":33.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602104_FRO.jpg?v=1781716098"},{"product_id":"techpro-ni2602106-fog-light-bracket-left","title":"TechPro NI2602106 Fog Light Bracket - Left","description":"\u003ch2\u003eFog Light Bracket for Nissan Pathfinder\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket is built for a factory-style fit on the left side of the vehicle. It is made with high-quality materials for durable, long-term performance and reliable support in the front lighting assembly. Part number NI2602106 is a direct-fit solution for select Nissan Pathfinder models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style precision for accurate alignment\u003c\/li\u003e\n\u003cli\u003eDurable construction for lasting performance\u003c\/li\u003e\n\u003cli\u003eLeft-side fog light bracket application\u003c\/li\u003e\n\u003cli\u003eOE cross-reference: 269153JA0A\u003c\/li\u003e\n\u003cli\u003eTechPro part number NI2602106\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eTechPro NI2602106 is a fog light bracket for 2013-2016 Nissan Pathfinder, left. It is engineered to restore proper mounting support for the fog light assembly and help maintain correct positioning within the front body structure. For buyers searching for a 2013 Nissan Pathfinder left fog light bracket, a 2014-2016 Nissan Pathfinder fog light bracket, or an OE-style replacement for part number NI2602106, this component matches the listed application and OEM reference 269153JA0A.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Resolve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or missing fog light mounting support\u003c\/li\u003e\n\u003cli\u003eMisaligned fog light positioning on the left side\u003c\/li\u003e\n\u003cli\u003eLoose attachment points after front-end repair\u003c\/li\u003e\n\u003cli\u003eReplacement needs for damaged OE bracket 269153JA0A\u003c\/li\u003e\n\u003cli\u003eRestoration of proper fog light assembly fit on Nissan Pathfinder models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall on the left side only for the listed Pathfinder applications. Verify the OEM reference, mounting points, and bracket orientation before installation. Confirm the fog light assembly seats correctly after installation to ensure proper alignment with surrounding body panels and lighting components.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this bracket with materials selected for durability and consistent function. The factory-style design supports accurate fitment for the specified Nissan Pathfinder applications, and the OE cross-reference helps confirm application matching for part number NI2602106.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692741301,"sku":"HYNX-NI2602106","price":22.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602106_FRO.jpg?v=1781716105"},{"product_id":"techpro-ni2602107-fog-light-bracket-left","title":"TechPro NI2602107 Fog Light Bracket - Left","description":"\u003ch2\u003eTechPro Fog Light Bracket for Nissan Left Side\u003c\/h2\u003e\u003cp\u003eRestore secure fog lamp mounting with this TechPro fog light bracket, part number NI2602107. It is built for factory-style precision and direct replacement use on the left side of select Nissan crossover applications, including the Nissan Qashqai and Nissan Rogue Sport.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fitment for accurate alignment\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality materials for durability\u003c\/li\u003e\n\u003cli\u003eSupports reliable long-term performance\u003c\/li\u003e\n\u003cli\u003eDirect replacement for left-side fog light mounting\u003c\/li\u003e\n\u003cli\u003eCross-references OEM 269156MA0A for the same application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro NI2602107 is a left fog light bracket engineered for 2017-2019 Nissan Qashqai and 2017-2019 Nissan Rogue Sport applications. This bracket helps secure the fog lamp in the correct position so the assembly sits properly within the front fascia. For buyers searching for a 2017-2019 Nissan Rogue Sport left fog light bracket or a 2017-2019 Nissan Qashqai left fog lamp bracket, NI2602107 provides a direct-fit replacement option with OE-style dimensions and mounting precision.\u003c\/p\u003e\u003cp\u003eMeasured at 9 inches long, 5.9 inches wide, and 2.8 inches high, this TechPro bracket is designed to match the original mounting layout while keeping the fog light stable and properly located. The part number NI2602107 is also useful when cross-checking replacement needs against OEM reference 269156MA0A.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting points\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp positioning on the left side\u003c\/li\u003e\n\u003cli\u003eMisaligned front lighting after front-end repair\u003c\/li\u003e\n\u003cli\u003eImproper fog light fitment in the bumper opening\u003c\/li\u003e\n\u003cli\u003eReplacement needs for OEM 269156MA0A applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2017-2019 Nissan Qashqai, left. Fits 2017-2019 Nissan Rogue Sport, left. Verify the OEM reference and left-side mounting location before installation. Compare the bracket shape and dimensions to the original part to confirm proper alignment with the fog light housing and bumper opening.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this fog light bracket with high-quality materials and factory-style precision to support durable, lasting performance. Part number NI2602107 is intended for dependable replacement use on the listed Nissan applications.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692774069,"sku":"HYNX-NI2602107","price":41.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2602107_Fro.jpg?v=1781716112"},{"product_id":"techpro-ni2603101-fog-light-bracket-right","title":"TechPro NI2603101 Fog Light Bracket - Right","description":"\u003ch2\u003eTechPro Fog Light Bracket for Nissan Sentra\u003c\/h2\u003e\u003cp\u003eRestore secure fog light mounting with this TechPro fog light bracket, part number NI2603101. It is built for factory-style precision and direct replacement use on the right side of the vehicle, with fitment for 2007-2012 Nissan Sentra models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style precision for accurate fog light alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eRight-side application for 2007-2012 Nissan Sentra\u003c\/li\u003e\n\u003cli\u003eCompact bracket design with dimensions of 12.48 in. length, 7.02 in. width, and 5.46 in. height\u003c\/li\u003e\n\u003cli\u003eLightweight construction at 0.35 lbs for straightforward handling during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro NI2603101 is a replacement fog light bracket engineered for the right side of the Nissan Sentra. It supports proper fog lamp positioning and helps maintain the original mounting geometry expected in OE-style repairs. For drivers searching for a 2007-2012 Nissan Sentra right fog light bracket or a Nissan Sentra fog lamp bracket replacement, this part provides a direct-fit solution built around the original application. This part cross-references Nissan OE number 26911ET80A for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting bracket\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp alignment after front-end repair\u003c\/li\u003e\n\u003cli\u003eMissing or damaged right-side fog light support\u003c\/li\u003e\n\u003cli\u003eImproper lamp positioning caused by worn mounting points\u003c\/li\u003e\n\u003cli\u003eRestoring secure attachment after bumper or fascia service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 2007-2012 Nissan Sentra and confirm right-side placement before installation. Compare the original bracket to the replacement part number NI2603101 and OE reference 26911ET80A to ensure correct application. Test-fit the bracket and fog light assembly before final tightening so the lamp sits in the proper position.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this fog light bracket with high-quality materials and factory-style precision to support durable, long-term service. The part is intended as an OE-style replacement for Nissan Sentra fog light mounting repairs.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692806837,"sku":"HYNX-NI2603101","price":17.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2603101_Fro.jpg?v=1781716119"},{"product_id":"techpro-ni2603104-fog-light-bracket-right","title":"TechPro NI2603104 Fog Light Bracket - Right","description":"\u003ch2\u003eFog Light Bracket for Nissan Juke\u003c\/h2\u003e\u003cp\u003eRestore proper fog light mounting with this TechPro fog light bracket, part number NI2603104. Built for factory-style precision, it is made to support secure alignment and dependable long-term performance on the 2011-2014 Nissan Juke, right side.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style fitment for accurate fog light positioning\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality materials for durability\u003c\/li\u003e\n\u003cli\u003eSupports lasting performance in daily driving conditions\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the right-side application\u003c\/li\u003e\n\u003cli\u003ePart number NI2603104 for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eTechPro NI2603104 is a right fog light bracket engineered for the 2011-2014 Nissan Juke, right. It is designed to match factory-style mounting geometry so the fog lamp can sit in the correct location and maintain proper alignment with the surrounding body components. This bracket is a practical choice when replacing a damaged or missing support on a Nissan Juke fog light assembly. This part cross-references Nissan OEM 269101KA0A for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting support\u003c\/li\u003e\n\u003cli\u003eLoose fog lamp alignment on the right side\u003c\/li\u003e\n\u003cli\u003eReplacement after front-end body repair\u003c\/li\u003e\n\u003cli\u003eRestoring secure attachment for the fog light assembly\u003c\/li\u003e\n\u003cli\u003eCorrecting fitment issues caused by a damaged OE bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 2011-2014 Nissan Juke and confirm right-side placement before installation. Compare the original bracket and mounting points to ensure the replacement matches the OE-style layout. Part number NI2603104 is intended for direct replacement use on the right side, and fitment should be checked against the existing fog light assembly and surrounding trim before final installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro builds this fog light bracket with durable materials and factory-style precision to support reliable function and long-term value. The design focus is consistent fit and stable mounting performance for the Nissan Juke application.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692839605,"sku":"HYNX-NI2603104","price":33.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2603104_FRO.jpg?v=1781716126"},{"product_id":"techpro-ni2603106-fog-light-bracket-right","title":"TechPro NI2603106 Fog Light Bracket - Right","description":"\u003ch2\u003eFog Light Bracket for Nissan Pathfinder\u003c\/h2\u003e\u003cp\u003eThis TechPro fog light bracket is built for factory-style precision and dependable fitment on the right side of the vehicle. It is a direct replacement option for 2013-2016 Nissan Pathfinder models that need a secure mounting point for the fog light assembly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFactory-style precision for accurate alignment\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability and lasting performance\u003c\/li\u003e\n\u003cli\u003eRight-side fog light bracket application\u003c\/li\u003e\n\u003cli\u003eOE cross-reference: 269103JA0A\u003c\/li\u003e\n\u003cli\u003ePart number NI2603106 for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eTechPro NI2603106 is a fog light bracket made for the right side of 2013-2016 Nissan Pathfinder vehicles. It is engineered to restore proper fog light mounting location and support stable positioning of the lamp assembly. The bracket’s compact size and durable construction make it a practical replacement when the original mounting point is damaged, bent, or no longer holds the fog light securely. This part cross-references 269103JA0A for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroken or cracked fog light mounting brackets\u003c\/li\u003e\n\u003cli\u003eLoose fog light alignment on the right side\u003c\/li\u003e\n\u003cli\u003eImproper lamp positioning after front-end repair\u003c\/li\u003e\n\u003cli\u003eMissing or damaged OE-style mounting support\u003c\/li\u003e\n\u003cli\u003eFitment issues on 2013-2016 Nissan Pathfinder right-side fog light assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2013-2016 Nissan Pathfinder, right. Verify the original bracket location and compare the OE reference 269103JA0A before installation. Confirm the mounting points and lamp alignment during replacement so the fog light sits correctly in the bumper opening. Part number NI2603106 is intended for the right-side application only.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eTechPro focuses on OE-style replacement parts built for reliable function and long-term value. This fog light bracket is manufactured with materials selected to support consistent performance in everyday use.\u003c\/p\u003e","brand":"TechPro","offers":[{"title":"Default Title","offer_id":52278692872373,"sku":"HYNX-NI2603106","price":21.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/T2_NI2603106_FRO.jpg?v=1781716134"}],"url":"https:\/\/www.partcatalog.com\/collections\/brackets-flanges-and-hangers-7.oembed?page=6","provider":"PartCatalog","version":"1.0","type":"link"}