{"title":"Transmission \u003e Flexplate","description":"\u003cp\u003eThe flexplate connects your automatic transmission's torque converter to the engine's crankshaft, transferring rotational force while allowing for slight flex under load — hence the name. Unlike a manual transmission flywheel, a flexplate is a thin stamped-steel disc with a ring gear around the perimeter for the starter motor to engage. They rarely fail without warning, but cracks, a broken ring gear, or stripped starter teeth will sideline your vehicle fast. Most flexplates last the life of the engine, but high-mileage engines, hard launches, and improper torque converter installation accelerate wear. When buying, match the bolt pattern, tooth count (typically 164 or 168 teeth), and crankshaft pilot diameter to your specific engine and transmission pairing — these specs vary even within the same model year. OEM-spec aftermarket flexplates from brands like ATP, Pioneer, and Dorman are reliable alternatives to dealer parts at a fraction of the cost.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoud metallic clunking or ringing at startup\u003c\/strong\u003e — A cracked flexplate flexes and vibrates as the starter engages, producing a distinct clunk or ring that disappears once the engine is running. This is one of the most common and recognizable symptoms.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrinding or rattling noise at idle that changes with engine RPM\u003c\/strong\u003e — A crack that's propagated near the torque converter mounting flange causes a rhythmic rattle that tracks with engine speed, often mistaken for a bad torque converter or loose heat shield.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine cranks but won't start, or starter spins freely\u003c\/strong\u003e — Broken or severely worn ring gear teeth prevent the starter from catching, causing the starter motor to spin without engaging the engine.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVibration felt through the floorboard or drivetrain at low speeds\u003c\/strong\u003e — A warped or cracked flexplate introduces imbalance into the rotating assembly, producing a low-frequency vibration that's most noticeable at idle or during light acceleration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible cracks or stress fractures found during transmission removal\u003c\/strong\u003e — Flexplates are frequently inspected and replaced during major transmission service or torque converter replacement, since the labor cost to revisit the repair later far exceeds the cost of the part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow often does a flexplate need to be replaced?\u003c\/strong\u003e\n  There's no fixed interval — flexplates typically last 150,000–200,000+ miles under normal driving conditions. Replacement is usually triggered by a specific failure: cracking, ring gear damage, or warping. They're most commonly replaced during transmission removal, torque converter service, or rear main seal repair, since the flexplate is already accessible.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eIs an OEM flexplate worth the extra cost over aftermarket?\u003c\/strong\u003e\n  For most applications, a quality aftermarket flexplate from ATP, Pioneer, or Dorman meets OEM specifications and performs identically in normal use. OEM may be preferable for high-torque or performance applications where factory metallurgy matters. Confirm the aftermarket part matches your crankshaft bolt pattern, tooth count, and torque converter pilot diameter before ordering.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat else should I replace while the flexplate is out?\u003c\/strong\u003e\n  Always replace the rear main seal if it shows any seepage — it's a $10–$30 part and the labor is already paid for. Inspect the torque converter pilot and mounting studs, and consider a new torque converter if it has high miles. Flexplates typically cost $30–$90 for aftermarket; OEM parts run $80–$200 depending on application.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"atp-parts-z-105-automatic-transmission-flexplate","title":"ATP Parts Z-105 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-105 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-105 automatic transmission flexplate is engineered for reliable performance in select Ford, Lincoln, and Mercury vehicles. Designed with precise specifications, this flexplate supports smooth power transfer and durability for models like the Ford Mustang, Lincoln Continental, and Mercury Cougar.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.25 inches (336.55 mm)\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eWeight added: 28 ounces for balance\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Ford, Lincoln, and Mercury models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-105 flexplate features a 14.25-inch outside diameter and 164 teeth, designed to mesh precisely with the starter motor for efficient engine cranking. The mounting hole diameter of 11.5 mm ensures secure attachment to the crankshaft flange. This flexplate includes added weight of 28 ounces to maintain proper balance during operation, reducing vibration and wear on the transmission components. With a pitch of 12 flywheels, it is engineered to meet the specifications required by automatic transmissions in various Ford, Lincoln, and Mercury vehicles.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis automatic transmission flexplate is compatible with a range of Ford, Lincoln, and Mercury models, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Bronco, F-100, F-150, F-250, F-350\u003c\/li\u003e\n\u003cli\u003eLincoln Continental, Mark VI, Town Car, Versailles\u003c\/li\u003e\n\u003cli\u003eMercury Cougar, Capri, Colony Park, Monarch, Montego, Zephyr\u003c\/li\u003e\n\u003cli\u003eFord Econoline series: E-100, E-150, E-250, E-350 and their Club Wagon variants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the ATP Parts Z-105 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWorn or damaged flexplate teeth causing starter engagement problems\u003c\/li\u003e\n\u003cli\u003eImbalanced flexplate leading to transmission vibration and noise\u003c\/li\u003e\n\u003cli\u003eCracked or warped flexplate affecting torque converter alignment\u003c\/li\u003e\n\u003cli\u003eLoose mounting holes resulting in flexplate movement or failure\u003c\/li\u003e\n\u003cli\u003eCompatibility issues with OEM flexplates in specified Ford, Lincoln, and Mercury models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surface and crankshaft flange are clean and free of debris before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to prevent loosening\u003c\/li\u003e\n\u003cli\u003eVerify tooth alignment with the starter motor to avoid engagement issues\u003c\/li\u003e\n\u003cli\u003eInspect the torque converter and transmission input shaft for wear during installation\u003c\/li\u003e\n\u003cli\u003eUse thread locker on mounting bolts if recommended by vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-105 flexplate is manufactured to meet industry standards for durability and fitment. While this product is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible Ford, Lincoln, and Mercury vehicles. Warranty coverage details should be confirmed with the product distributor or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750192309,"sku":"BBFB-Z-105","price":62.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z105_Fro.jpg?v=1774704651"},{"product_id":"atp-parts-z-110-automatic-transmission-flexplate","title":"ATP Parts Z-110 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-110 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-110 automatic transmission flexplate is engineered for reliable performance in select Ford and Mercury vehicles. Designed with precision, this flexplate supports smooth power transfer and optimal engine operation for models like the Ford Mustang and Mercury Cougar.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.25 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.188 inches (30.18 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eWeight added: 28 ounces\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Ford and Mercury models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description and Specifications\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-110 flexplate features a 14.25-inch outside diameter and 164 teeth, ensuring proper engagement with the starter motor for reliable engine starts. The mounting hole diameter of 11.5 mm allows for secure attachment to the crankshaft flange. With a diameter of 1.188 inches (approximately 30.18 mm), this flexplate is designed to fit specific automatic transmission setups. The 12 pitch flywheels specification aligns with the tooth count to maintain consistent meshing and durability. Additionally, the flexplate includes 28 ounces of weight added to balance the rotating assembly, reducing vibrations and improving drivetrain smoothness.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis automatic transmission flexplate is compatible with a range of Ford and Mercury vehicles, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Bronco, F-100, F-150, F-250, F-250 HD, F-350\u003c\/li\u003e\n\u003cli\u003eFord E-100, E-150, E-250, E-350 Econoline and Club Wagon models\u003c\/li\u003e\n\u003cli\u003eMercury Cougar, Grand Marquis, LTD, Marquis, Montego, Mustang, Thunderbird\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIts design supports the specific transmission and engine configurations found in these models, making it a suitable replacement part for maintenance or repair.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the ATP Parts Z-110 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged flexplate teeth\u003c\/li\u003e\n\u003cli\u003eExcessive vibration caused by unbalanced flexplates\u003c\/li\u003e\n\u003cli\u003eCrankshaft mounting instability from damaged mounting holes\u003c\/li\u003e\n\u003cli\u003eTransmission noise related to flexplate misalignment\u003c\/li\u003e\n\u003cli\u003eFailure of the flexplate leading to drivetrain performance issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate tooth count and mounting hole diameter match your vehicle’s specifications\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid loosening or damage\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment to prevent transmission and engine vibration\u003c\/li\u003e\n\u003cli\u003eUse thread locker on mounting bolts if recommended by the vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-110 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide consistent performance in compatible Ford and Mercury vehicles. Warranty coverage details should be confirmed with the point of purchase or ATP Parts directly to ensure proper support.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750225077,"sku":"BBFB-Z-110","price":67.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z110_Fro.jpg?v=1774704652"},{"product_id":"atp-parts-z-111-automatic-transmission-flexplate","title":"ATP Parts Z-111 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-111 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-111 automatic transmission flexplate is engineered for reliable performance in a range of GM vehicles including Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models. Designed specifically for internally balanced engines with a two-piece crank seal, this flexplate ensures proper fitment and function in applications such as the Chevrolet Camaro, GMC Sierra, and Pontiac Firebird.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.49 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.25 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with internally balanced engines featuring a two-piece crank seal\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12 to 14\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-111 flexplate is designed to connect the engine’s crankshaft to the torque converter in automatic transmission systems. With a precise inside diameter of 2.49 inches and an outside diameter of 14.125 inches, it fits a variety of GM vehicles such as the Chevrolet C10 Suburban, Buick LeSabre, and Pontiac Grand Prix. The 168-tooth count ensures proper engagement with the starter motor, while the 11.25-inch mounting hole diameter provides secure attachment to the crankshaft. This flexplate is intended for use with internally balanced engines that utilize a two-piece crank seal, making it suitable for many classic and late-model GM trucks and cars.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with a wide range of GM makes and models, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuick models like Century, LeSabre, and Regal\u003c\/li\u003e\n\u003cli\u003eChevrolet trucks and cars such as C10, C1500, Camaro, and Impala\u003c\/li\u003e\n\u003cli\u003eGMC trucks including K10, K1500, and Sierra series\u003c\/li\u003e\n\u003cli\u003eOldsmobile and Pontiac vehicles including Cutlass, Firebird, and Grand Am\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by ATP Parts Z-111 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWorn or damaged flexplate teeth causing starter engagement problems\u003c\/li\u003e\n\u003cli\u003eFlexplate cracks or warping leading to transmission vibration\u003c\/li\u003e\n\u003cli\u003eImproper fitment on internally balanced engines with two-piece crank seals\u003c\/li\u003e\n\u003cli\u003eNoise or rattling from a loose or misaligned flexplate\u003c\/li\u003e\n\u003cli\u003eReplacement for OEM flexplates that no longer meet specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify engine balance type and crank seal configuration before installation\u003c\/li\u003e\n\u003cli\u003eEnsure the mounting hole diameter matches the crankshaft flange\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear teeth for proper engagement\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate damage\u003c\/li\u003e\n\u003cli\u003eCheck for any signs of flexplate warping or cracks during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-111 flexplate is manufactured to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible GM vehicles. ATP Parts offers a limited warranty against defects in materials and workmanship, ensuring confidence in your purchase.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750257845,"sku":"BBFB-Z-111","price":55.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z111_Fro.jpg?v=1774704652"},{"product_id":"atp-parts-z-112-automatic-transmission-flexplate","title":"ATP Parts Z-112 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-112 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-112 automatic transmission flexplate is engineered for reliable performance in a range of Buick, Chevrolet, and GMC vehicles. Designed specifically for externally balanced engines, this flexplate ensures proper fitment and function in models such as the Chevrolet Camaro, Impala, and GMC K1500.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eWeight added for balance\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-112 flexplate is designed to meet the specifications required for automatic transmissions in select Buick, Chevrolet, and GMC vehicles. With an outside diameter of 14.125 inches and 168 teeth, it provides the necessary engagement for the starter motor and smooth power transfer from the engine to the transmission. The mounting hole diameter of 11.5 inches ensures secure attachment to the crankshaft flange. This flexplate is intended for use with externally balanced engines, which require precise weight distribution to maintain engine balance and reduce vibration. The inclusion of added weight helps maintain this balance during operation. It is compatible with pitch flywheels ranging from 12 to 14 inches, making it suitable for a variety of classic and modern vehicle models including the Chevrolet Bel Air, Camaro, and GMC K2500 Suburban.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates in Buick, Chevrolet, and GMC automatic transmission vehicles\u003c\/li\u003e\n\u003cli\u003eAddresses issues with starter engagement due to missing or broken teeth\u003c\/li\u003e\n\u003cli\u003eHelps correct vibration problems caused by imbalanced flexplates in externally balanced engines\u003c\/li\u003e\n\u003cli\u003eEnsures proper mounting and alignment for smooth transmission operation\u003c\/li\u003e\n\u003cli\u003eSupports reliable torque transfer between engine and transmission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your vehicle’s make, model, and engine balance type before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear or damage prior to mounting the flexplate\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications when tightening mounting bolts to avoid warping\u003c\/li\u003e\n\u003cli\u003eEnsure the flexplate teeth align correctly with the starter motor gear for reliable starting\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-112 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is engineered to provide consistent performance in compatible Buick, Chevrolet, and GMC vehicles. Warranty coverage details should be confirmed with the original ATP Parts documentation or authorized distributors.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750290613,"sku":"BBFB-Z-112","price":56.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z112_Fro_68a40aac-43d6-4411-902d-0cc9078cf448.jpg?v=1774704652"},{"product_id":"atp-parts-z-114-automatic-transmission-flexplate","title":"ATP Parts Z-114 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-114 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-114 automatic transmission flexplate is designed for reliable performance in a range of GM vehicles. Engineered to fit popular models such as the Chevrolet Camaro, Buick LeSabre, and Pontiac Grand Prix, this flexplate supports smooth power transfer in automatic transmissions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 12.875 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 153 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 10.25 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with internally balanced engines featuring a 2-piece crank seal\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.073 inches (27.025 mm)\u003c\/li\u003e\n\u003cli\u003eDesigned for pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-114 flexplate is specifically manufactured for automatic transmissions in a variety of General Motors vehicles, including Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models. This flexplate features 153 teeth and an outside diameter of 12.875 inches, making it suitable for engines that require a flexplate with these precise dimensions. The mounting hole diameter of 10.25 inches ensures proper fitment on internally balanced engines equipped with a two-piece crank seal. The 1.073-inch diameter and compatibility with 12 to 14-inch pitch flywheels provide the necessary specifications for secure and efficient power transfer between the engine and transmission.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with a wide range of GM vehicles, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Camaro, Caprice, Impala, Monte Carlo, and Nova\u003c\/li\u003e\n\u003cli\u003eBuick LeSabre, Century, Regal, and Skylark\u003c\/li\u003e\n\u003cli\u003ePontiac Grand Prix, Firebird, and Grand Am\u003c\/li\u003e\n\u003cli\u003eOldsmobile Cutlass, Delta 88, and 88 models\u003c\/li\u003e\n\u003cli\u003eGMC C10 Suburban, K10 Suburban, and Jimmy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the ATP Parts Z-114 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWorn or damaged flexplate teeth causing starter engagement problems\u003c\/li\u003e\n\u003cli\u003eFlexplate cracks or warping leading to vibration and noise\u003c\/li\u003e\n\u003cli\u003eImproper fitment resulting in transmission misalignment\u003c\/li\u003e\n\u003cli\u003eFailure of original flexplate in internally balanced engines with two-piece crank seals\u003c\/li\u003e\n\u003cli\u003eReplacement for OEM flexplates with matching specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify engine balance type and crank seal configuration before installation\u003c\/li\u003e\n\u003cli\u003eEnsure the mounting hole diameter matches the crankshaft flange\u003c\/li\u003e\n\u003cli\u003eInspect the flexplate for any damage or defects prior to installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eCheck starter ring gear engagement after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-114 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is engineered to provide consistent performance in compatible GM vehicles. Warranty coverage details should be confirmed with the distributor or manufacturer at the time of purchase.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750323381,"sku":"BBFB-Z-114","price":49.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z114_Fro_677aa0ee-42be-428e-bfdb-07f506a63eb7.jpg?v=1774704652"},{"product_id":"atp-parts-z-121-automatic-transmission-flexplate","title":"ATP Parts Z-121 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-121 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-121 automatic transmission flexplate is engineered for reliable performance in a range of Chevrolet vehicles. Designed to meet specific dimensional requirements, this flexplate supports smooth power transfer in models such as the Chevrolet Camaro, Impala, and Suburban.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.482 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-121 flexplate is designed specifically for automatic transmissions in Chevrolet vehicles including the Bel Air, C10 and C20 Suburban, Camaro, Caprice, Corvette, El Camino, Impala, K10 Suburban, Malibu, Monte Carlo, Nova, P20, and P30 models. With 168 teeth and precise inside and outside diameters, this flexplate ensures proper engagement with the starter and transmission components. The mounting hole diameter of 11.5 mm allows for secure attachment to the crankshaft, while compatibility with 12 to 14 inch pitch flywheels makes it suitable for a variety of engine setups. This flexplate is not SFI approved, so it is intended for street and light-duty applications rather than racing environments.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates in Chevrolet automatic transmissions\u003c\/li\u003e\n\u003cli\u003eAddresses starter engagement issues caused by missing or damaged teeth\u003c\/li\u003e\n\u003cli\u003eCorrects vibration or noise problems related to flexplate imbalance or damage\u003c\/li\u003e\n\u003cli\u003eEnsures proper fitment for specific Chevrolet models requiring a 168-tooth flexplate\u003c\/li\u003e\n\u003cli\u003eSupports smooth torque transfer between engine and transmission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your Chevrolet model and transmission before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and mounting holes for damage prior to installation\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications when securing the flexplate to avoid warping\u003c\/li\u003e\n\u003cli\u003eCheck starter ring gear engagement after installation to ensure proper fit\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-121 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI certified, it is built to provide consistent performance in compatible Chevrolet automatic transmissions. Warranty coverage details should be confirmed through the ATP Parts official documentation or authorized distributors.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750388917,"sku":"BBFB-Z-121","price":79.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z121_Fro.jpg?v=1774704653"},{"product_id":"atp-parts-z-123-automatic-transmission-flexplate","title":"ATP Parts Z-123 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for Pontiac Vehicles\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-123 automatic transmission flexplate is engineered to meet the specific requirements of various Pontiac models. Designed with precise dimensions and tooth count, this flexplate ensures proper engagement and smooth operation in your vehicle's transmission system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.75 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 13.938 inches (348.175 mm)\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 166 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.25 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with flywheels having 12 to 14 pitch\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003cli\u003eSFI approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-123 flexplate is designed for automatic transmissions in select Pontiac models including Bonneville, Catalina, Firebird, Grand Am, Grand LeMans, Grand Prix, GTO, Laurentian, LeMans, Parisienne, and Tempest. With an outside diameter of 13.938 inches and 166 teeth, it matches the OEM specifications required for proper starter ring gear engagement and torque converter mounting. The mounting hole diameter of 11.25 inches ensures a secure fit to the crankshaft flange. This flexplate is compatible with flywheels featuring a pitch between 12 and 14, making it suitable for a range of Pontiac automatic transmission setups.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing starter engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses flexplate cracks or warping that lead to vibration or noise\u003c\/li\u003e\n\u003cli\u003eResolves improper torque converter alignment problems\u003c\/li\u003e\n\u003cli\u003eEliminates transmission slippage related to flexplate failure\u003c\/li\u003e\n\u003cli\u003ePrevents starter ring gear tooth damage affecting engine start-up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATP Parts Z-123 flexplate, ensure the mounting surface and crankshaft flange are clean and free of debris. Verify the tooth count and pitch compatibility with your vehicle’s flywheel before installation. Torque mounting bolts to manufacturer specifications to avoid flexplate distortion. It is recommended to inspect the torque converter and starter for wear during replacement to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-123 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is built to provide reliable service in compatible Pontiac automatic transmissions. ATP Parts offers a limited warranty against manufacturing defects; please refer to ATP Parts documentation for specific warranty terms.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750356149,"sku":"BBFB-Z-123","price":84.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z123_Fro_a8e5de74-32e2-46b1-a74a-d4dcd70ea3e5.jpg?v=1774704653"},{"product_id":"atp-parts-z-124-automatic-transmission-flexplate","title":"ATP Parts Z-124 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-124 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-124 automatic transmission flexplate is designed specifically for select Cadillac models, including the Commercial Chassis, DeVille, Eldorado, and Fleetwood. Engineered to meet precise specifications, this flexplate ensures reliable performance and proper fitment for your vehicle's automatic transmission system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 13.938 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 166 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.161 inches (348.175 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-124 flexplate is manufactured to match the exact dimensions required for Cadillac automatic transmissions in models such as the Commercial Chassis, DeVille, Eldorado, and Fleetwood. With an outside diameter of 13.938 inches and 166 teeth, this flexplate provides the necessary engagement with the starter motor for smooth engine starts. The mounting hole diameter of 11.5 mm ensures secure attachment to the crankshaft, while the diameter of 1.161 inches (348.175 mm) aligns with the transmission input shaft specifications. Designed for use with pitch flywheels ranging from 12 to 14 inches, this flexplate supports proper torque transfer and engine balance without added weight modifications.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis automatic transmission flexplate is compatible with the following Cadillac models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCadillac Commercial Chassis\u003c\/li\u003e\n\u003cli\u003eCadillac DeVille\u003c\/li\u003e\n\u003cli\u003eCadillac Eldorado\u003c\/li\u003e\n\u003cli\u003eCadillac Fleetwood\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCommon issues addressed by replacing the flexplate include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged teeth\u003c\/li\u003e\n\u003cli\u003eVibrations caused by flexplate imbalance or cracks\u003c\/li\u003e\n\u003cli\u003eTransmission input shaft misalignment\u003c\/li\u003e\n\u003cli\u003eNoise from flexplate damage or warping\u003c\/li\u003e\n\u003cli\u003eFailure to properly transfer engine torque to the transmission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate matches the vehicle’s exact make and model before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and mounting holes for damage or wear\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid loosening or warping\u003c\/li\u003e\n\u003cli\u003eCheck starter ring gear engagement after installation\u003c\/li\u003e\n\u003cli\u003eVerify pitch flywheel compatibility within the 12 to 14 inch range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-124 flexplate is manufactured to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is engineered to provide consistent performance for the specified Cadillac models. Warranty coverage details should be confirmed with the parts provider or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750421685,"sku":"BBFB-Z-124","price":106.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z124_Fro.jpg?v=1774704653"},{"product_id":"atp-parts-z-126-automatic-transmission-flexplate","title":"ATP Parts Z-126 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for Ford and Mercury Vehicles\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-126 automatic transmission flexplate is engineered to meet the specific requirements of select Ford and Mercury models, including the Mustang, Cougar, LTD, Monarch, and Montego. Designed with precision, this flexplate ensures proper engagement and smooth operation of your vehicle's automatic transmission system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter of 13.313 inches (338.175 mm) for exact fitment\u003c\/li\u003e\n\u003cli\u003e157 teeth for optimal starter engagement\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter of 10.5 mm for secure installation\u003c\/li\u003e\n\u003cli\u003eWeight added design with 28 ounces for balanced operation\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels ranging from 12 to 14\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-126 flexplate is manufactured to precise specifications, featuring a 13.313-inch outside diameter and 157 teeth to ensure reliable starter motor engagement. The mounting hole diameter of 10.5 mm allows for a secure and accurate fit on compatible automatic transmissions. This flexplate includes a weight addition of 28 ounces, which helps maintain balance and reduce vibration during operation. It is designed for use with pitch flywheels sized between 12 and 14, making it suitable for a range of Ford and Mercury vehicles such as the Mustang, Cougar, LTD, Monarch, and Montego.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing starter engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses vibration problems due to unbalanced or damaged flexplates\u003c\/li\u003e\n\u003cli\u003eSolves mounting alignment issues with precise hole diameter and tooth count\u003c\/li\u003e\n\u003cli\u003eRestores proper transmission function in affected Ford and Mercury automatic models\u003c\/li\u003e\n\u003cli\u003ePrevents transmission damage caused by faulty flexplate operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your vehicle’s make, model, and transmission type before installation\u003c\/li\u003e\n\u003cli\u003eInspect the flywheel and starter for wear or damage during replacement\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate warping\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment of the flexplate teeth with the starter motor ring gear\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools and follow safety procedures when working under the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-126 flexplate to meet industry standards for durability and performance. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible Ford and Mercury automatic transmission applications. ATP Parts offers a limited warranty against defects in materials and workmanship, ensuring confidence in your purchase.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750454453,"sku":"BBFB-Z-126","price":67.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z126_Fro_d006495d-f73d-4be4-ba4b-7ddb8a1f7725.jpg?v=1774704654"},{"product_id":"atp-parts-z-127-automatic-transmission-flexplate","title":"ATP Parts Z-127 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for Ford, Lincoln, and Mercury\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-127 automatic transmission flexplate is engineered to meet the specifications required for various Ford, Lincoln, and Mercury vehicles. Designed with precision, this flexplate ensures proper engagement between the engine and transmission for smooth power transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.25 inches (336.55 mm)\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.188 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Ford, Lincoln, and Mercury models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-127 flexplate features a 14.25-inch outside diameter and 164 teeth, designed to match the flywheel and starter gear requirements of select automatic transmissions. The mounting hole diameter of 11.5 mm ensures a secure fit to the crankshaft flange. This flexplate is compatible with a range of vehicles including Ford F-100, F-150, F-250, F-350, E-100 Econoline, E-250 Econoline Club Wagon, E-350 Econoline Club Wagon, Lincoln Continental, Lincoln Town Car, Mercury Cougar, and Mustang models. The 12 pitch flywheel design aligns with factory specifications for reliable operation.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis automatic transmission flexplate is used to connect the engine’s crankshaft to the torque converter in automatic transmissions. It is essential for proper engine starting and power transfer. This part can help address issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDamaged or worn flexplate teeth causing starter engagement problems\u003c\/li\u003e\n\u003cli\u003eCracked or warped flexplate leading to vibration or noise\u003c\/li\u003e\n\u003cli\u003eImproper fitment causing transmission misalignment\u003c\/li\u003e\n\u003cli\u003eFlexplate failure resulting in transmission or engine damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATP Parts Z-127 flexplate, ensure the mounting surface is clean and free of debris. Torque mounting bolts to manufacturer specifications to avoid warping. Verify tooth alignment with the starter motor gear to prevent engagement issues. It is recommended to inspect the torque converter and flywheel for wear during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-127 flexplate to meet OEM standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed for reliable performance in compatible Ford, Lincoln, and Mercury vehicles. Warranty coverage details should be confirmed with the parts provider.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750487221,"sku":"BBFB-Z-127","price":79.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z127_Fro.jpg?v=1774704654"},{"product_id":"atp-parts-z-128-automatic-transmission-flexplate","title":"ATP Parts Z-128 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-128 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-128 automatic transmission flexplate is engineered for reliable performance in a range of Chevrolet and GMC vehicles. Designed to meet specific fitment requirements, this flexplate ensures proper engagement between the engine and transmission for smooth power transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.483 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eWeight added for balanced operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-128 flexplate is designed specifically for automatic transmissions in Chevrolet and GMC models including the Bel Air, Blazer, C10 series, Caprice, Corvette, Impala, and various Suburban and pickup truck variants. With 168 teeth and precise mounting hole diameter of 11.5 mm, this flexplate provides accurate engagement with the starter motor and transmission input shaft. The 14.125-inch outside diameter and 2.483-inch inside diameter ensure compatibility with a range of flywheel sizes, particularly those between 12 and 14 inches. The added weight feature helps maintain balance during engine operation, reducing vibration and wear.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Bel Air, Blazer, C10, C20, C30, Caprice, Corvette, El Camino, Impala, Malibu, Monte Carlo\u003c\/li\u003e\n\u003cli\u003eGMC C1500, C2500, C3500, G20, G30, Jimmy, K5 Blazer, K10, K20, K30, K1500, K3500, P20, P30, P1500, P3500, R20, R30, R2500, R3500, V20, V30, V2500, V3500 Suburban models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged teeth\u003c\/li\u003e\n\u003cli\u003eTransmission input shaft misalignment\u003c\/li\u003e\n\u003cli\u003eExcessive vibration caused by unbalanced flexplates\u003c\/li\u003e\n\u003cli\u003eCracks or warping from heat and stress over time\u003c\/li\u003e\n\u003cli\u003eIncompatibility with specific flywheel sizes leading to improper fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify tooth count and mounting hole diameter match your vehicle’s specifications\u003c\/li\u003e\n\u003cli\u003eInspect the flywheel and starter motor for wear before installation\u003c\/li\u003e\n\u003cli\u003eEnsure proper torque settings on mounting bolts to avoid flexplate damage\u003c\/li\u003e\n\u003cli\u003eCheck for balance and alignment during installation to prevent vibration issues\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damaging the flexplate teeth or mounting holes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-128 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is constructed with quality materials and balanced weight to support reliable transmission operation. Warranty coverage details should be confirmed with the parts provider or manufacturer documentation.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750519989,"sku":"BBFB-Z-128","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z128_Fro.jpg?v=1774704654"},{"product_id":"atp-parts-z-135-automatic-transmission-flexplate","title":"ATP Parts Z-135 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-135 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-135 automatic transmission flexplate is engineered for reliable performance in a range of Chevrolet and GMC trucks and SUVs. Designed with precise specifications, this flexplate ensures proper engagement between the engine and transmission for smooth power transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 139 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.75 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 10\u003c\/li\u003e\n\u003cli\u003eWeight added for balance\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Chevrolet and GMC models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-135 flexplate is designed specifically for automatic transmissions in Chevrolet and GMC vehicles including Blazer, C10, C1500, K5 Blazer, Jimmy, and various Suburban and pickup truck models. With 139 teeth and a 14.125-inch outside diameter, this flexplate matches factory specifications to maintain proper starter engagement and torque converter alignment. The mounting hole diameter of 11.75 inches ensures a secure fit to the crankshaft flange. Additionally, the flexplate includes weight added for balance, which helps reduce vibration and wear during operation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with a wide range of Chevrolet and GMC trucks and SUVs, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Blazer, C10, C20, C30, C1500, C2500, C3500\u003c\/li\u003e\n\u003cli\u003eGMC Jimmy, K5 Blazer, K10, K20, K30, K1500, K2500, K3500\u003c\/li\u003e\n\u003cli\u003eSuburban models for C10, C20, C1500, C2500, K10, K20, K1500, K2500\u003c\/li\u003e\n\u003cli\u003eG20, G30 vans and R-series trucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged teeth\u003c\/li\u003e\n\u003cli\u003eTransmission vibration caused by unbalanced flexplates\u003c\/li\u003e\n\u003cli\u003eCrankshaft and torque converter misalignment\u003c\/li\u003e\n\u003cli\u003eFlexplate cracking or warping from heat and stress\u003c\/li\u003e\n\u003cli\u003eNoise and rough shifting related to flexplate failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surface and crankshaft flange are clean and free of debris\u003c\/li\u003e\n\u003cli\u003eVerify tooth count and diameter match the original flexplate\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid warping\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear for damage before installation\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment with the torque converter during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-135 flexplate is manufactured to meet OEM standards for durability and fitment. While this product is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible Chevrolet and GMC vehicles. Warranty coverage details should be confirmed with the parts provider or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750552757,"sku":"BBFB-Z-135","price":80.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z135_Fro.jpg?v=1774704655"},{"product_id":"atp-parts-z-136-automatic-transmission-flexplate","title":"ATP Parts Z-136 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for Chevrolet and GMC Vehicles\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-136 automatic transmission flexplate is engineered to meet the demands of various Chevrolet, GMC, and Hummer models. Designed with precision, this flexplate ensures proper engagement between the engine and the transmission for smooth power transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 139 teeth for accurate starter engagement\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm for secure fitment\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 10\u003c\/li\u003e\n\u003cli\u003eWeight added for balanced operation\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Chevrolet, GMC, and Hummer models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Design and Precise Specifications\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-136 flexplate is manufactured to exact specifications, featuring 139 teeth that provide reliable starter motor engagement. Its 14.125-inch outside diameter and 11.5 mm mounting hole diameter ensure compatibility with a wide range of automatic transmissions used in Chevrolet Blazer, C10, C1500, and Yukon models, as well as GMC Savana and Hummer H1 vehicles. The added weight balances the flexplate during operation, reducing vibration and wear. Although not SFI approved, this flexplate meets the necessary standards for everyday driving and moderate performance applications.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with numerous Chevrolet, GMC, and Hummer models, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Blazer, C10, C20, C1500, C2500, C3500, Tahoe, Yukon\u003c\/li\u003e\n\u003cli\u003eGMC Savana 2500, Savana 3500, Sierra 1500 series, and other full-size trucks and vans\u003c\/li\u003e\n\u003cli\u003eHummer H1 and related models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed for automatic transmissions requiring a 139-tooth flexplate with a 14.125-inch diameter, making it suitable for replacement or repair in these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the ATP Parts Z-136 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter motor engagement problems due to worn or damaged flexplate teeth\u003c\/li\u003e\n\u003cli\u003eVibration or imbalance caused by a damaged or improperly weighted flexplate\u003c\/li\u003e\n\u003cli\u003eTransmission noise or rough shifting linked to flexplate wear\u003c\/li\u003e\n\u003cli\u003eFlexplate cracks or warping from prolonged use or stress\u003c\/li\u003e\n\u003cli\u003eReplacement during engine or transmission rebuilds requiring precise fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATP Parts Z-136 flexplate, ensure the mounting surface is clean and free of debris. Torque mounting bolts to manufacturer specifications to avoid warping. Verify the tooth count and diameter match the vehicle’s requirements before installation. It is recommended to inspect the starter motor ring gear for wear during replacement. Professional installation is advised for optimal performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-136 flexplate with quality materials and precise engineering to meet OEM standards. While this flexplate is not SFI certified, it is designed for durability and reliable operation in compatible Chevrolet, GMC, and Hummer vehicles. Warranty coverage details should be confirmed with the distributor or ATP Parts directly.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750585525,"sku":"BBFB-Z-136","price":80.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z136_Fro.jpg?v=1774704655"},{"product_id":"atp-parts-z-156-automatic-transmission-flexplate","title":"ATP Parts Z-156 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-156 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-156 automatic transmission flexplate is engineered for reliable performance in a range of GM and Isuzu vehicles. Designed with precise specifications, this flexplate ensures proper engagement between the engine and the torque converter for smooth transmission operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 11.875 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 142 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 8.5 mm\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eDiameter: 0.990 inches (25.15 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Buick, Cadillac, Chevrolet, Isuzu, Oldsmobile, and Pontiac models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description and Specifications\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-156 flexplate features a 142-tooth design with an outside diameter of 11.875 inches, making it suitable for automatic transmissions requiring this specific configuration. The mounting hole diameter of 8.5 mm ensures secure attachment to the crankshaft. With a pitch flywheel count of 12, this flexplate matches the flywheel specifications of various GM and Isuzu vehicles. The diameter of 0.990 inches (approximately 25.15 mm) corresponds to the thickness or relevant dimension critical for proper fitment and function.\u003c\/p\u003e\u003cp\u003eThis flexplate is compatible with a wide range of vehicles including Buick models like the Century and Regal, Cadillac, Chevrolet models such as the Cavalier, Malibu, and Monte Carlo, as well as Isuzu Rodeo and Trooper, Oldsmobile Cutlass series, and Pontiac Grand Am and Sunfire. The part number Z-156 identifies this specific flexplate within the ATP Parts catalog, ensuring correct replacement and fitment.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged flexplates causing transmission engagement problems\u003c\/li\u003e\n\u003cli\u003eFixes issues related to starter ring gear tooth damage or missing teeth\u003c\/li\u003e\n\u003cli\u003eResolves vibration or noise caused by flexplate warping or cracks\u003c\/li\u003e\n\u003cli\u003eAddresses improper torque converter alignment due to flexplate defects\u003c\/li\u003e\n\u003cli\u003ePrevents transmission slippage linked to flexplate failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your vehicle’s make, model, and year before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and torque converter for wear or damage prior to mounting\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications when tightening mounting bolts to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eEnsure the flexplate teeth align correctly with the starter motor gear\u003c\/li\u003e\n\u003cli\u003eCheck for any signs of imbalance or damage after installation to prevent drivetrain issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-156 flexplate is manufactured to meet OEM specifications for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible automatic transmission systems. ATP Parts products typically come with a limited warranty against manufacturing defects; please refer to ATP Parts documentation for specific warranty terms.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750618293,"sku":"BBFB-Z-156","price":65.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z156_Fro_705348db-0cfa-40d0-b703-65b029f78cf9.jpg?v=1774704655"},{"product_id":"atp-parts-z-157-automatic-transmission-flexplate","title":"ATP Parts Z-157 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for Ford, Lincoln, and Mercury\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-157 automatic transmission flexplate is engineered to meet the specific requirements of various Ford, Lincoln, and Mercury vehicles. Designed with precision, this flexplate ensures proper engagement between the engine and transmission for smooth power transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.25 inches (336.55 mm)\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth for accurate starter engagement\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eWeight added: 50 ounces for balanced operation\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Ford, Lincoln, and Mercury models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Specifications and Features\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-157 flexplate features a 14.25-inch outside diameter and 164 teeth, designed to match the starter motor's ring gear for reliable engine starting. The mounting hole diameter of 11.5 mm ensures secure attachment to the crankshaft flange. This flexplate includes a 50-ounce weight added to maintain balance during rotation, reducing vibration and wear on the transmission components. With a pitch flywheel count of 12, it aligns precisely with the flywheel teeth for consistent performance. This part is not SFI approved and does not include an SFI certification sticker.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis automatic transmission flexplate is compatible with a wide range of Ford, Lincoln, and Mercury vehicles, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Bronco, F-100, F-150, F-250, Explorer, Mustang, Thunderbird\u003c\/li\u003e\n\u003cli\u003eLincoln Continental, Mark VI, Mark VII, Town Car, Grand Marquis\u003c\/li\u003e\n\u003cli\u003eMercury Capri, Colony Park, Cougar, Marquis, Monarch, Zephyr\u003c\/li\u003e\n\u003cli\u003eFord Econoline series: E-100, E-150, E-250, including Club Wagon variants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the ATP Parts Z-157 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged flexplate teeth\u003c\/li\u003e\n\u003cli\u003eVibration and imbalance caused by missing or damaged weights\u003c\/li\u003e\n\u003cli\u003eCrankshaft mounting issues from incorrect hole diameter or flexplate fit\u003c\/li\u003e\n\u003cli\u003eTransmission noise or rough shifting related to flexplate wear\u003c\/li\u003e\n\u003cli\u003eFlexplate cracks or warping from extended use or stress\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surface and crankshaft flange are clean and free of debris before installation\u003c\/li\u003e\n\u003cli\u003eVerify tooth count and mounting hole diameter match the vehicle specifications\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications when securing the flexplate to avoid distortion\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear for wear during installation\u003c\/li\u003e\n\u003cli\u003eBalance the flexplate assembly if weights are damaged or missing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-157 flexplate to meet OEM standards for fit and function. While this flexplate is not SFI certified, it undergoes quality control inspections to ensure durability and performance. Warranty coverage details should be confirmed with the parts distributor or manufacturer documentation.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750651061,"sku":"BBFB-Z-157","price":67.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z157_Fro.jpg?v=1774704656"},{"product_id":"atp-parts-z-158-automatic-transmission-flexplate","title":"ATP Parts Z-158 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-158 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-158 automatic transmission flexplate is designed for reliable performance in select Ford and Mercury vehicles. Engineered with precision, this flexplate supports smooth power transfer in models such as the Ford Mustang and Mercury Cougar.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 15.563 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 184 teeth\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.297 inches (395.288 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eMostly solid design with six small holes around the inner diameter\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford and Mercury models including F-100, F-150, F-250, F-350, LTD, Marauder, Marquis, Montego, Mustang, and Thunderbird\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-158 flexplate features a mostly solid construction with six small holes around the inner diameter, providing a balance of strength and weight. With an outside diameter of 15.563 inches and 184 teeth, it is designed to mesh precisely with the starter motor and flywheel assembly. The 1.297-inch diameter and 12 pitch flywheels ensure compatibility with specific automatic transmission setups found in various Ford and Mercury vehicles. This flexplate is engineered to maintain proper alignment and torque transfer between the engine and transmission, critical for smooth automatic shifting and drivetrain performance.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis flexplate is suitable for use in the following vehicles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord F-100, F-150, F-250, F-350 trucks\u003c\/li\u003e\n\u003cli\u003eFord Mustang and Thunderbird\u003c\/li\u003e\n\u003cli\u003eMercury Cougar, Marauder, Marquis, Montego, and LTD\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt addresses common issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWorn or damaged flexplate teeth causing starter engagement problems\u003c\/li\u003e\n\u003cli\u003eCracks or warping leading to vibration and drivetrain noise\u003c\/li\u003e\n\u003cli\u003eFlexplate failure resulting in transmission input shaft misalignment\u003c\/li\u003e\n\u003cli\u003eReplacement for flexplates with missing or damaged bolt holes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate matches the exact tooth count and diameter specifications for your vehicle model\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear before installation\u003c\/li\u003e\n\u003cli\u003eTighten flexplate bolts to manufacturer torque specifications to prevent loosening\u003c\/li\u003e\n\u003cli\u003eVerify proper alignment with the torque converter and transmission input shaft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-158 flexplate is manufactured to meet OEM standards for fit and function. While this part is not SFI approved and does not include an SFI certification sticker, it is designed for dependable service in compatible Ford and Mercury automatic transmissions. Warranty coverage details should be confirmed with the parts distributor or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750683829,"sku":"BBFB-Z-158","price":96.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z158_Fro.jpg?v=1774704656"},{"product_id":"atp-parts-z-161-automatic-transmission-flexplate","title":"ATP Parts Z-161 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-161 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-161 automatic transmission flexplate is engineered for reliable performance in select Ford vehicles. Designed with precise specifications, this flexplate supports smooth power transfer in models like the Ford E-250 Econoline and F-150.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.25 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.188 inches (30.18 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eWeight added for balance\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Ford Econoline and F-Series models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-161 flexplate is designed to meet the exacting requirements of automatic transmission systems in Ford vehicles such as the E-100 Econoline, E-250 Econoline Club Wagon, F-250 HD, and Thunderbird. With an outside diameter of 14.25 inches and 164 teeth, this flexplate ensures proper engagement with the starter motor and smooth torque transfer from the engine to the transmission. The mounting hole diameter of 11.5 mm allows for secure attachment, while the 12 pitch flywheels specification aligns with the flywheel design of compatible Ford models. Additionally, the flexplate includes weight added for improved balance and reduced vibration during operation.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates in Ford E-350 Econoline Club Wagon and F-350 models\u003c\/li\u003e\n\u003cli\u003eAddresses starter engagement issues caused by missing or broken teeth\u003c\/li\u003e\n\u003cli\u003eHelps eliminate transmission vibration related to unbalanced flexplates\u003c\/li\u003e\n\u003cli\u003eSupports smooth automatic transmission operation in Ford LTD and Thunderbird vehicles\u003c\/li\u003e\n\u003cli\u003eRestores proper torque transfer for improved drivability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific Ford model and transmission type before installation\u003c\/li\u003e\n\u003cli\u003eInspect the mounting surface and starter ring gear for wear or damage\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment to prevent starter engagement issues\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-161 flexplate to meet industry standards for durability and performance. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible Ford vehicles. Warranty coverage details should be confirmed through the product documentation or ATP Parts directly.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750782133,"sku":"BBFB-Z-161","price":72.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z161_Fro_28d27645-c401-45ae-ba0a-e3c32f9f9c96.jpg?v=1774704656"},{"product_id":"atp-parts-z-162-automatic-transmission-flexplate","title":"ATP Parts Z-162 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-162 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-162 automatic transmission flexplate is engineered for reliable performance in select Chevrolet and GMC models. Designed specifically for vehicles like the Chevrolet S10, S10 Blazer, GMC S15, S15 Jimmy, and Sonoma, this flexplate ensures proper transmission function and durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 12.375 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 148 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.75 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.031 inches (26.2 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eCompatible with automatic transmissions\u003c\/li\u003e\n\u003cli\u003ePart number: Z-162\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-162 flexplate is designed to connect the engine's crankshaft to the torque converter in automatic transmission systems. With an outside diameter of 12.375 inches and 148 teeth, it matches the specifications required for proper engagement and smooth operation. The mounting hole diameter of 9.75 inches ensures a secure fit to the crankshaft flange. This flexplate is compatible with Chevrolet S10, S10 Blazer, GMC S15, S15 Jimmy, and Sonoma models, providing a precise fit for these vehicles. The 12 pitch flywheels and 148 teeth configuration support consistent starter motor engagement and torque transfer.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged flexplates in Chevrolet S10 and GMC S15 models\u003c\/li\u003e\n\u003cli\u003eResolves issues with starter engagement due to missing or damaged teeth\u003c\/li\u003e\n\u003cli\u003eAddresses flexplate cracks or warping that cause vibration or transmission noise\u003c\/li\u003e\n\u003cli\u003ePrevents transmission slippage caused by improper flexplate fitment\u003c\/li\u003e\n\u003cli\u003eEnsures proper torque converter alignment and operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your vehicle’s make, model, and year before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and torque converter for wear or damage prior to installation\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications when tightening mounting bolts to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eEnsure the flexplate teeth align correctly with the starter motor gear\u003c\/li\u003e\n\u003cli\u003eCheck for any signs of imbalance or damage after installation to prevent drivetrain issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-162 flexplate is manufactured to meet OEM specifications for fit and function. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is built to provide reliable service in compatible Chevrolet and GMC vehicles. ATP Parts offers a limited warranty against defects in materials and workmanship, ensuring confidence in the product’s durability and performance.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750814901,"sku":"BBFB-Z-162","price":77.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z162_Fro.jpg?v=1774704656"},{"product_id":"atp-parts-z-165-automatic-transmission-flexplate","title":"ATP Parts Z-165 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-165 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-165 automatic transmission flexplate is engineered for reliable performance in select GM vehicles. Designed specifically for applications requiring a one-piece crank seal engine, this flexplate ensures proper fit and function in various Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 12.875 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 153 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 10.63 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.073 inches (327.025 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14\u003c\/li\u003e\n\u003cli\u003eWeight added for balanced operation\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-165 flexplate is designed to meet the specifications required for automatic transmission systems in a range of GM vehicles, including the Chevrolet Camaro, Corvette, Impala, and Monte Carlo, as well as Buick Bonneville and Cadillac Fleetwood. With 153 teeth and a 12.875-inch outside diameter, this flexplate provides the necessary engagement for the starter motor and smooth power transfer from the engine to the transmission.\u003c\/p\u003e\u003cp\u003eIts mounting hole diameter of 10.63 inches ensures a secure fit on the crankshaft flange, while the 1.073-inch thickness contributes to durability and resistance to flexing under load. The flexplate is intended for use with one-piece crank seal engines, making it suitable for specific engine configurations found in the listed vehicle models.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBuick Bonneville, Regal\u003c\/li\u003e\n\u003cli\u003eCadillac Brougham, Fleetwood, Roadmaster\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro, Caprice, Corvette, El Camino, Impala, Monte Carlo\u003c\/li\u003e\n\u003cli\u003eOldsmobile Cutlass, Cutlass Supreme, Custom Cruiser\u003c\/li\u003e\n\u003cli\u003ePontiac Firebird, Grand Prix, Parisienne\u003c\/li\u003e\n\u003cli\u003eCommercial Chassis models requiring a 153-tooth flexplate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by ATP Parts Z-165 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged flexplate teeth\u003c\/li\u003e\n\u003cli\u003eVibration or imbalance caused by flexplate weight inconsistencies\u003c\/li\u003e\n\u003cli\u003eImproper fitment on one-piece crank seal engines\u003c\/li\u003e\n\u003cli\u003eFlexplate cracking or warping under stress\u003c\/li\u003e\n\u003cli\u003eTransmission noise related to flexplate defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your vehicle’s make, model, and engine type before installation\u003c\/li\u003e\n\u003cli\u003eEnsure the crankshaft flange and mounting surfaces are clean and free of debris\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to prevent loosening or damage\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear teeth for proper engagement after installation\u003c\/li\u003e\n\u003cli\u003eCheck for any signs of flexplate damage or imbalance during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-165 flexplate to meet industry standards for durability and performance. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is engineered to provide reliable service in compatible GM vehicles. Warranty coverage details should be confirmed with the parts distributor or manufacturer documentation.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750847669,"sku":"BBFB-Z-165","price":58.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z165_Fro.jpg?v=1774704657"},{"product_id":"atp-parts-z-166-automatic-transmission-flexplate","title":"ATP Parts Z-166 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-166 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-166 automatic transmission flexplate is engineered for reliable performance in a range of GM vehicles. Designed specifically for use with one-piece crank seal engines, this flexplate supports smooth power transfer between the engine and transmission.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.0 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.25 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with one-piece crank seal engines\u003c\/li\u003e\n\u003cli\u003eWeight added for balance and durability\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12 to 14\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-166 flexplate features a 14.125-inch outside diameter and 2.0-inch inside diameter, making it suitable for a variety of automatic transmission applications. With 168 teeth, it ensures proper engagement with the starter motor for reliable engine starts. The mounting hole diameter of 11.25 inches allows for secure attachment to the crankshaft. This flexplate is designed for use with one-piece crank seal engines, commonly found in GM vehicles such as Chevrolet Silverado, GMC Sierra, and Cadillac Escalade. The added weight improves rotational balance, reducing vibration and wear during operation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with multiple GM makes and models, including Buick, Cadillac, Chevrolet, GMC, and Oldsmobile. It fits popular models such as the Chevrolet Blazer, Silverado, Suburban, Tahoe, and the GMC Jimmy, Sierra, and Yukon. The ATP Parts Z-166 is ideal for vehicles equipped with automatic transmissions requiring a 168-tooth flexplate and one-piece crank seal engine configuration.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged flexplate teeth\u003c\/li\u003e\n\u003cli\u003eVibration and imbalance caused by flexplate weight inconsistencies\u003c\/li\u003e\n\u003cli\u003eCrankshaft mounting issues from incorrect hole diameter or fitment\u003c\/li\u003e\n\u003cli\u003eFlexplate failure in one-piece crank seal engine setups\u003c\/li\u003e\n\u003cli\u003eTransmission noise related to flexplate misalignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is a one-piece crank seal type before installation\u003c\/li\u003e\n\u003cli\u003eVerify the tooth count and mounting hole diameter match your vehicle’s specifications\u003c\/li\u003e\n\u003cli\u003eInspect the starter motor ring gear for wear when replacing the flexplate\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate damage\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment to prevent transmission and engine issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-166 flexplate to meet OEM standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide consistent performance in compatible GM vehicles. ATP Parts offers a limited warranty against defects in materials and workmanship, ensuring confidence in your purchase.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750880437,"sku":"BBFB-Z-166","price":57.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z166_Fro.jpg?v=1774704657"},{"product_id":"atp-parts-z-167-automatic-transmission-flexplate","title":"ATP Parts Z-167 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-167 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-167 automatic transmission flexplate is engineered for reliable performance in select Chevrolet and GMC vehicles. Designed to meet specific dimensional requirements, this flexplate ensures proper fit and function for models such as the Chevrolet Tahoe and GMC Sierra series.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.0 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.63 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14\u003c\/li\u003e\n\u003cli\u003eWeight added for balanced operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-167 flexplate is designed specifically for automatic transmissions in Chevrolet and GMC trucks and SUVs, including models like the Blazer, C1500 Suburban, and Yukon. With 168 teeth and a 14.125-inch outside diameter, this flexplate matches the OEM specifications required for smooth starter engagement and torque transfer. The 2.0-inch inside diameter and 11.63-inch mounting hole diameter ensure precise alignment with the crankshaft and torque converter. Additionally, the flexplate is compatible with pitch flywheels ranging from 12 to 14, making it suitable for a range of factory configurations. The added weight feature helps maintain balance during operation, reducing vibration and wear.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates in Chevrolet and GMC automatic transmissions\u003c\/li\u003e\n\u003cli\u003eAddresses issues with starter engagement due to missing or damaged teeth\u003c\/li\u003e\n\u003cli\u003eCorrects vibration problems caused by unbalanced or warped flexplates\u003c\/li\u003e\n\u003cli\u003eRestores proper torque transfer between the engine and transmission\u003c\/li\u003e\n\u003cli\u003eEnsures compatibility with specific flywheel pitch sizes for reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify the flexplate tooth count and dimensions match your vehicle’s specifications before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and torque converter mounting surfaces for damage or debris\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications when tightening mounting bolts to avoid warping\u003c\/li\u003e\n\u003cli\u003eCheck starter alignment after installation to ensure proper engagement with the flexplate teeth\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-167 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is engineered to provide consistent performance in compatible Chevrolet and GMC models. Warranty coverage details should be confirmed through the ATP Parts official documentation or authorized distributors.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385750978741,"sku":"BBFB-Z-167","price":72.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z167_Fro_a0dd8201-eadf-436c-9640-c879a0b24b15.jpg?v=1774704657"},{"product_id":"atp-parts-z-189-automatic-transmission-flexplate","title":"ATP Parts Z-189 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-189 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-189 automatic transmission flexplate is designed for reliable performance in select Ford and Mazda vehicles. Engineered to meet specific fitment requirements, this flexplate supports smooth power transfer in automatic transmissions for models like the Ford Aerostar, B3000, and Ranger.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 11.313 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 135 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.25 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 0.943 inches (287.375 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14\u003c\/li\u003e\n\u003cli\u003eDesigned for automatic transmissions\u003c\/li\u003e\n\u003cli\u003ePart number: Z-189\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-189 flexplate features a precise 11.313-inch outside diameter and 135 teeth, ensuring proper engagement with the starter motor for efficient engine cranking. The mounting hole diameter of 9.25 inches allows for secure attachment to the crankshaft, while the 0.943-inch diameter dimension supports compatibility with specific transmission setups. This flexplate is engineered to work with pitch flywheels ranging from 12 to 14, making it suitable for various automatic transmission configurations found in Ford Aerostar, B3000, and Ranger models. The part number Z-189 identifies this component within ATP Parts' catalog, facilitating accurate replacement and maintenance.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis automatic transmission flexplate is compatible with the following vehicles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Aerostar\u003c\/li\u003e\n\u003cli\u003eFord B3000\u003c\/li\u003e\n\u003cli\u003eFord Ranger\u003c\/li\u003e\n\u003cli\u003eMazda models sharing the same transmission specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed to replace worn or damaged flexplates in these vehicles, ensuring proper transmission function and engine starting performance.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the Z-189 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged teeth\u003c\/li\u003e\n\u003cli\u003eVibrations caused by flexplate imbalance or cracks\u003c\/li\u003e\n\u003cli\u003eTransmission noise related to flexplate failure\u003c\/li\u003e\n\u003cli\u003eDifficulty in engine starting from flexplate misalignment\u003c\/li\u003e\n\u003cli\u003eReplacement of flexplates with incorrect dimensions or tooth count\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify the tooth count and mounting hole diameter match your vehicle’s specifications before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear or damage\u003c\/li\u003e\n\u003cli\u003eEnsure proper torque specifications are followed when securing the flexplate\u003c\/li\u003e\n\u003cli\u003eCheck for any signs of flexplate warping or cracks during installation\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-189 flexplate is manufactured to meet industry standards for durability and fitment accuracy. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible Ford and Mazda automatic transmissions. Warranty coverage details should be confirmed with the parts distributor or manufacturer documentation.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751011509,"sku":"BBFB-Z-189","price":78.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z189_Fro.jpg?v=1774704658"},{"product_id":"atp-parts-z-192-automatic-transmission-flexplate","title":"ATP Parts Z-192 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-192 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-192 automatic transmission flexplate is engineered for reliable performance in select Ford and Mazda vehicles. Designed to meet precise specifications, this flexplate ensures proper engagement between the engine and transmission for smooth operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 11.625 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 138 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.25 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 0.969 inches (24.62 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-192 flexplate is designed specifically for automatic transmissions in Ford and Mazda models such as the Aerostar, B4000, Bronco II, Explorer, Navajo, and Ranger. With an outside diameter of 11.625 inches and 138 teeth, this flexplate matches the exact tooth count required for proper starter engagement and torque converter mounting. The mounting hole diameter of 9.25 inches ensures a secure fit to the crankshaft flange. This flexplate is compatible with pitch flywheels ranging from 12 to 14 inches, making it suitable for a range of engine configurations within the specified vehicle models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing starter engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses vibration or noise related to flexplate imbalance or cracks\u003c\/li\u003e\n\u003cli\u003eResolves transmission shifting problems linked to flexplate misalignment\u003c\/li\u003e\n\u003cli\u003ePrevents torque converter slippage due to improper flexplate fit\u003c\/li\u003e\n\u003cli\u003eRestores proper engine-to-transmission connection for smooth power transfer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate tooth count (138) matches the starter and flywheel specifications\u003c\/li\u003e\n\u003cli\u003eVerify mounting hole diameter (9.25 inches) aligns with crankshaft flange\u003c\/li\u003e\n\u003cli\u003eInspect the flexplate for any damage or warping before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid loosening\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment with the torque converter during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-192 flexplate to meet OEM standards for fit and function. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is built to provide consistent performance in compatible Ford and Mazda vehicles. Warranty coverage details should be confirmed with the parts provider or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751044277,"sku":"BBFB-Z-192","price":78.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z192_Fro.jpg?v=1774704658"},{"product_id":"atp-parts-z-194-automatic-transmission-flexplate","title":"ATP Parts Z-194 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for Chrysler, Dodge, and Plymouth\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-194 automatic transmission flexplate is engineered to meet the specifications required for various Chrysler, Dodge, and Plymouth models. Designed with precision, this flexplate ensures proper engagement between the engine and transmission for smooth power transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 11.75 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 139 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 8.75 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 0.979 inches (24.9 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003cli\u003ePart number: Z-194\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-194 flexplate features a 139-tooth design with an 11.75-inch outside diameter, making it suitable for automatic transmissions in a range of Chrysler, Dodge, and Plymouth vehicles. The mounting hole diameter of 8.75 inches ensures a secure fit to the crankshaft flange. This flexplate is compatible with pitch flywheels ranging from 12 to 14 inches, providing versatility across multiple models including the Dodge Caravan, Chrysler Town \u0026amp; Country, Plymouth Acclaim, and Dodge Dakota.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with the following makes and models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChrysler: Town \u0026amp; Country, New Yorker, LeBaron, Sebring, Dynasty, Grand Voyager\u003c\/li\u003e\n\u003cli\u003eDodge: Caravan, Dakota, Charger, Daytona, Spirit, Sundance, Viper\u003c\/li\u003e\n\u003cli\u003ePlymouth: Acclaim, Aries, Reliant, Laser, Sundance, Voyager\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged flexplates causing transmission engagement problems\u003c\/li\u003e\n\u003cli\u003eFixes issues related to starter ring gear tooth damage\u003c\/li\u003e\n\u003cli\u003eResolves vibration or noise caused by flexplate imbalance or cracks\u003c\/li\u003e\n\u003cli\u003eAddresses improper fitment or mounting hole wear\u003c\/li\u003e\n\u003cli\u003eSupports smooth torque transfer in automatic transmission systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure proper alignment of mounting holes with crankshaft flange\u003c\/li\u003e\n\u003cli\u003eVerify tooth count and diameter match the original flexplate specifications\u003c\/li\u003e\n\u003cli\u003eInspect the flywheel and starter ring gear for wear before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate damage\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for transmission removal and installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-194 flexplate to meet OEM standards for fit and function. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed for reliable performance in compatible Chrysler, Dodge, and Plymouth automatic transmissions. Warranty coverage details should be confirmed with the ATP Parts documentation or distributor.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751109813,"sku":"BBFB-Z-194","price":60.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z194_Fro.jpg?v=1774704659"},{"product_id":"atp-parts-z-196-automatic-transmission-flexplate","title":"ATP Parts Z-196 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-196 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-196 automatic transmission flexplate is designed for reliable performance in select Chrysler, Dodge, and Plymouth vehicles. This flexplate features a 10.0-inch outside diameter and is engineered to meet the specific requirements of various models including the Dodge Ram 2500 Van and Plymouth Acclaim.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 10.0 inches (254 mm)\u003c\/li\u003e\n\u003cli\u003eZero tooth count, designed without ring gear teeth\u003c\/li\u003e\n\u003cli\u003eIncludes six small holes around the inside diameter and four edge holes for mounting\u003c\/li\u003e\n\u003cli\u003eDiameter of mounting holes: 0.833 inches (21.16 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Chrysler, Dodge, and Plymouth models\u003c\/li\u003e\n\u003cli\u003ePart number: Z-196\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-196 flexplate is a critical component in the automatic transmission system, connecting the engine's crankshaft to the torque converter. With an outside diameter of 10.0 inches and a precise hole pattern featuring six small holes around the inside diameter and four edge holes, this flexplate ensures proper alignment and secure mounting. The absence of teeth indicates it is designed for applications where a starter ring gear is not required or is integrated separately. The 0.833-inch diameter holes provide compatibility with specific transmission bolt patterns, making it suitable for a range of Chrysler, Dodge, and Plymouth vehicles such as the Dodge Charger, Plymouth Duster, and Chrysler LeBaron.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with various Chrysler, Dodge, and Plymouth models, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChrysler 300, LeBaron, Imperial, New Yorker\u003c\/li\u003e\n\u003cli\u003eDodge Charger, Dakota, Ram 2500 Van, Ramcharger\u003c\/li\u003e\n\u003cli\u003ePlymouth Acclaim, Aspen, B100 series, and Spirit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed for automatic transmission systems requiring a 10-inch flexplate without teeth, making it suitable for replacement or repair in these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the Z-196 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFlexplate cracks or warping due to engine stress or age\u003c\/li\u003e\n\u003cli\u003eImproper flexplate fit causing transmission misalignment\u003c\/li\u003e\n\u003cli\u003eFailure of flexplate mounting holes leading to vibration or noise\u003c\/li\u003e\n\u003cli\u003eReplacement of worn or damaged flexplates in automatic transmissions\u003c\/li\u003e\n\u003cli\u003eEnsuring proper torque converter engagement and smooth power transfer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify vehicle compatibility with the ATP Parts Z-196 part number before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and torque converter for wear or damage\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications for mounting bolts to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eEnsure the flexplate is properly aligned with the crankshaft and transmission input shaft\u003c\/li\u003e\n\u003cli\u003eCheck for any signs of imbalance or damage after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-196 flexplate is manufactured to meet industry standards for durability and fitment. While this part is not SFI approved and does not include an SFI certification sticker, it is engineered for reliable service in compatible Chrysler, Dodge, and Plymouth automatic transmissions. Warranty coverage details should be confirmed with the parts distributor or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751142581,"sku":"BBFB-Z-196","price":29.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z196_Fro.jpg?v=1774704659"},{"product_id":"atp-parts-z-231-automatic-transmission-flexplate","title":"ATP Parts Z-231 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-231 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-231 automatic transmission flexplate is engineered for reliable performance in select Chevrolet and GMC trucks and vans. Designed to meet precise specifications, this flexplate ensures proper engagement between the engine and transmission for smooth power transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eWeight added for balanced operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-231 flexplate features a 2.5-inch inside diameter and a 14.125-inch outside diameter, making it suitable for a range of Chevrolet and GMC vehicles including the C1500, C2500, C2500 Suburban, C3500, Express 3500, G30, K2500, K2500 Suburban, K3500, P30, P3500, R2500 Suburban, R3500, Savana 3500, and V3500 models. With 168 teeth, this flexplate is designed to mesh precisely with the starter motor for reliable engine starts. The mounting hole diameter of 11.5 inches ensures secure attachment to the crankshaft. Additionally, the flexplate is compatible with pitch flywheels ranging from 12 to 14 inches, providing versatility across multiple engine configurations. The added weight feature helps maintain balance during operation, reducing vibration and wear.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing starter engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses flexplate cracks or warping that lead to transmission noise\u003c\/li\u003e\n\u003cli\u003eSolves vibration problems related to imbalanced flexplates\u003c\/li\u003e\n\u003cli\u003eRestores proper tooth alignment for smooth engine starts\u003c\/li\u003e\n\u003cli\u003eSupports reliable power transfer in automatic transmission systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific Chevrolet or GMC model before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter motor for wear or damage\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to prevent loosening\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment of the flexplate teeth with the starter gear\u003c\/li\u003e\n\u003cli\u003eUse thread locker on mounting bolts if recommended by vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-231 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide consistent performance in compatible Chevrolet and GMC vehicles. Warranty coverage details should be confirmed with the ATP Parts documentation or authorized distributors.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751175349,"sku":"BBFB-Z-231","price":99.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z231_Fro_6d981d0c-4cfa-46e7-8471-e59aaa7ca86b.jpg?v=1774704659"},{"product_id":"atp-parts-z-243-automatic-transmission-flexplate","title":"ATP Parts Z-243 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-243 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-243 automatic transmission flexplate is engineered for reliable performance in select Ford, Lincoln, and Mercury vehicles. Designed with precise specifications, this flexplate ensures proper engagement between the engine and transmission for smooth operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.25 inches (336.55 mm)\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.188 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford, Lincoln, Mercury models\u003c\/li\u003e\n\u003cli\u003ePart number: Z-243\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-243 flexplate features a 14.25-inch outside diameter and 164 teeth, designed to match the flywheel and starter ring gear specifications of various Ford, Lincoln, and Mercury vehicles. The mounting hole diameter of 11.5 mm ensures secure attachment to the crankshaft, while the 12 pitch flywheel compatibility supports proper meshing with the starter motor. This flexplate is specifically engineered for automatic transmissions, providing a critical link between the engine’s crankshaft and the torque converter.\u003c\/p\u003e\u003cp\u003eCompatible with models such as the Ford Crown Victoria, Lincoln Town Car, Mercury Grand Marquis, Ford Thunderbird, Lincoln Continental, Mercury Cougar, and Lincoln Mark VIII, the Z-243 flexplate meets the exacting standards required for these vehicles’ drivetrains. The part number Z-243 identifies this specific flexplate within the ATP Parts catalog, facilitating accurate replacement and fitment.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing transmission engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses starter motor engagement problems due to incorrect tooth count or diameter\u003c\/li\u003e\n\u003cli\u003eSolves vibration or noise issues related to flexplate imbalance or damage\u003c\/li\u003e\n\u003cli\u003eRestores proper torque converter connection for smooth automatic transmission operation\u003c\/li\u003e\n\u003cli\u003ePrevents transmission slippage caused by flexplate failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting hole diameter matches the crankshaft specifications before installation\u003c\/li\u003e\n\u003cli\u003eVerify tooth count and outside diameter compatibility with the vehicle’s flywheel and starter\u003c\/li\u003e\n\u003cli\u003eInspect the torque converter and transmission input shaft for wear during replacement\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications when securing the flexplate to avoid warping\u003c\/li\u003e\n\u003cli\u003eCheck for any signs of flexplate damage or cracks before installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-243 flexplate is manufactured to meet OEM standards for fit and function. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible Ford, Lincoln, and Mercury automatic transmission applications. ATP Parts offers a limited warranty against defects in materials and workmanship, ensuring confidence in the product’s durability and performance.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751240885,"sku":"BBFB-Z-243","price":85.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z243_Fro.jpg?v=1774704660"},{"product_id":"atp-parts-z-269-automatic-transmission-flexplate","title":"ATP Parts Z-269 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-269 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-269 automatic transmission flexplate is engineered for reliable performance in a range of GM and related vehicles. Designed with precise dimensions and tooth count, this flexplate ensures proper engagement with the starter and smooth power transfer in automatic transmissions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.0 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.25 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-269 flexplate is designed to meet the specifications required for automatic transmissions in various Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, Pontiac, and Saab models. With 168 teeth, it provides the necessary engagement for the starter motor, ensuring reliable engine starts. The 14.125-inch outside diameter and 2.0-inch inside diameter accommodate a range of flywheel sizes, specifically those between 12 and 14 inches in pitch. The mounting hole diameter of 11.25 inches allows for secure attachment to the crankshaft flange. This flexplate is engineered without added weight, maintaining the balance and rotational integrity of the drivetrain.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with a wide variety of GM and related vehicles, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuick models\u003c\/li\u003e\n\u003cli\u003eCadillac Escalade, Escalade ESV, Escalade EXT\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro, Avalanche, Colorado, Corvette, Express 1500\/2500\/3500, Silverado 1500\/2500\/3500, Suburban 1500\/2500, Tahoe, Trailblazer, SSR\u003c\/li\u003e\n\u003cli\u003eGMC Canyon, Envoy, Sierra 1500\/2500\/3500, Yukon, Yukon XL 1500\/2500\u003c\/li\u003e\n\u003cli\u003eHummer H2, H3, H3T\u003c\/li\u003e\n\u003cli\u003eIsuzu Ascender, Rodeo\u003c\/li\u003e\n\u003cli\u003ePontiac G8, GTO, Firebird\u003c\/li\u003e\n\u003cli\u003eSaab 9-7x\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the ATP Parts Z-269 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged flexplate teeth\u003c\/li\u003e\n\u003cli\u003eVibrations caused by imbalanced or damaged flexplates\u003c\/li\u003e\n\u003cli\u003eTransmission noise related to flexplate wear or cracks\u003c\/li\u003e\n\u003cli\u003eDifficulty in engine starting from flexplate misalignment\u003c\/li\u003e\n\u003cli\u003eReplacement of flexplates damaged from previous transmission or engine repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate matches the exact tooth count and diameter specifications for your vehicle model\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate warping\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment with the torque converter and transmission input shaft\u003c\/li\u003e\n\u003cli\u003eUse thread locker on mounting bolts if recommended by the vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-269 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is built to OEM specifications for reliable service life. Warranty coverage details should be confirmed with the parts distributor or manufacturer documentation.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751273653,"sku":"BBFB-Z-269","price":95.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z269_Fro_252e843c-3cee-453c-9d55-bd566736a9ba.jpg?v=1774704660"},{"product_id":"atp-parts-z-270-automatic-transmission-flexplate","title":"ATP Parts Z-270 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-270 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-270 automatic transmission flexplate is engineered for reliable performance in select Chevrolet and GMC vehicles. Designed with precise dimensions and tooth count, this flexplate ensures proper crankshaft mounting and smooth transmission operation for models like the Silverado 1500 and Sierra 2500 HD.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 3.125 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14\u003c\/li\u003e\n\u003cli\u003eCrank mounting application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-270 flexplate is specifically designed for automatic transmissions in Chevrolet and GMC trucks and SUVs, including the Express 2500, Express 3500, Sierra 1500 HD Classic, Silverado 3500 Classic, Yukon XL 2500, and more. With 168 teeth, it matches the starter ring gear requirements for smooth engine starts and reliable torque transfer. The 3.125-inch inside diameter and 14.125-inch outside diameter provide a precise fit for crankshaft mounting, while the 11.5 mm mounting hole diameter ensures secure attachment. This flexplate is compatible with pitch flywheels ranging from 12 to 14 inches, making it suitable for a range of heavy-duty applications.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged flexplates causing starter engagement problems\u003c\/li\u003e\n\u003cli\u003eFixes vibration issues related to flexplate imbalance or cracks\u003c\/li\u003e\n\u003cli\u003eResolves transmission noise caused by flexplate wear\u003c\/li\u003e\n\u003cli\u003eAddresses improper torque transfer between engine and transmission\u003c\/li\u003e\n\u003cli\u003ePrevents failure due to mounting hole elongation or tooth damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific Chevrolet or GMC model before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear prior to mounting\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate damage\u003c\/li\u003e\n\u003cli\u003eCheck alignment carefully to prevent vibration and premature wear\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damaging the flexplate teeth during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-270 flexplate to meet OEM specifications for fit and function. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is built to provide consistent performance in compatible Chevrolet and GMC vehicles. Warranty coverage details should be confirmed with the parts distributor or manufacturer documentation.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751306421,"sku":"BBFB-Z-270","price":111.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z270_Fro.jpg?v=1774704661"},{"product_id":"atp-parts-z-271-automatic-transmission-flexplate","title":"ATP Parts Z-271 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for Chevrolet and GMC\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-271 automatic transmission flexplate is engineered to meet the demands of Chevrolet and GMC trucks and vans. Designed with precision, this flexplate ensures proper engagement between the engine and the transmission for smooth power transfer in vehicles like the Silverado 1500 and Express 2500.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003e168 teeth for accurate starter engagement\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.0 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels ranging from 12 to 14\u003c\/li\u003e\n\u003cli\u003eWeight added for balanced operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Design and Precise Fitment\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-271 flexplate is manufactured to exact specifications, featuring 168 teeth and a 14.125-inch outside diameter to match OEM requirements. Its mounting hole diameter of 11.0 mm ensures a secure fit on compatible Chevrolet and GMC models, including the Sierra 1500 Classic and Savana 1500. The flexplate’s design accommodates pitch flywheels between 12 and 14, providing versatility across multiple vehicle configurations. Weight added during manufacturing helps maintain balance and reduce vibration during operation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis automatic transmission flexplate is compatible with a range of Chevrolet and GMC trucks and vans, specifically:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Express 1500 and 2500\u003c\/li\u003e\n\u003cli\u003eGMC Savana 1500 and 2500\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 and 1500 Classic\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500 and 1500 Classic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged teeth\u003c\/li\u003e\n\u003cli\u003eTransmission vibration caused by unbalanced flexplates\u003c\/li\u003e\n\u003cli\u003eCracks or warping from engine torque stress\u003c\/li\u003e\n\u003cli\u003eImproper fitment leading to transmission misalignment\u003c\/li\u003e\n\u003cli\u003eNoise and rough shifting related to flexplate failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surface and bolt holes are clean and free of debris\u003c\/li\u003e\n\u003cli\u003eVerify the tooth count and diameter match the vehicle’s specifications\u003c\/li\u003e\n\u003cli\u003eUse proper torque settings on mounting bolts to avoid warping\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear for wear during installation\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for transmission removal and installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-271 flexplate is manufactured to meet industry standards for durability and fitment. While this product is not SFI approved and does not include an SFI certification sticker, it undergoes quality control to ensure reliable performance in compatible Chevrolet and GMC vehicles. Warranty coverage details should be confirmed with the parts provider or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751339189,"sku":"BBFB-Z-271","price":94.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z271_Fro.jpg?v=1774704661"},{"product_id":"atp-parts-z-272-automatic-transmission-flexplate","title":"ATP Parts Z-272 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-272 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-272 automatic transmission flexplate is designed specifically for select Ford and Mercury vehicles, including the Sable, Taurus, and Windstar models. Engineered to meet precise specifications, this flexplate ensures reliable performance in your vehicle's automatic transmission system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 11.813 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 135 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.0 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 0.984 inches (25 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eSFI approved: No\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-272 flexplate is manufactured to fit automatic transmissions in Ford and Mercury vehicles such as the Sable, Taurus, and Windstar. With an outside diameter of 11.813 inches and 135 teeth, this flexplate is designed to engage precisely with the starter motor and torque converter. The mounting hole diameter of 9.0 mm ensures secure attachment to the crankshaft, while the 0.984-inch diameter provides compatibility with the transmission input shaft. This flexplate is not SFI approved and does not include an SFI certification sticker, which is typical for standard OEM replacement parts. The absence of added weight means it maintains the original balance and performance characteristics of the vehicle.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged flexplates in Ford Sable, Taurus, and Mercury Windstar automatic transmissions\u003c\/li\u003e\n\u003cli\u003eResolves starter engagement problems caused by missing or broken teeth\u003c\/li\u003e\n\u003cli\u003eAddresses vibration or noise issues related to flexplate imbalance or cracks\u003c\/li\u003e\n\u003cli\u003ePrevents transmission slippage due to improper flexplate fitment\u003c\/li\u003e\n\u003cli\u003eSupports smooth torque converter operation and power transfer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate matches the vehicle’s make, model, and transmission type before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear or damage prior to mounting\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eVerify proper alignment with the torque converter to prevent transmission issues\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-272 flexplate to meet OEM standards for fit and function. While this part is not SFI certified, it is engineered for durability and reliable performance in compatible Ford and Mercury vehicles. Warranty coverage details should be confirmed with the parts provider or manufacturer, as they may vary based on purchase location and application.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751371957,"sku":"BBFB-Z-272","price":74.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z272_Fro.jpg?v=1774704661"},{"product_id":"atp-parts-z-273-automatic-transmission-flexplate","title":"ATP Parts Z-273 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-273 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-273 automatic transmission flexplate is engineered for reliable performance in select Ford vehicles. Designed to meet specific fitment requirements, this flexplate ensures proper engagement between the engine and transmission for smooth power transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.2 inches (336.55 mm)\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.188 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford E-150, E-150 Club Wagon, E-150 Econoline, E-150 Econoline Club Wagon, E-250, E-250 Econoline, F-150, F-150 Heritage, and Mustang models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-273 flexplate is designed to fit a range of Ford vehicles including the E-150 and E-250 Econoline series, as well as the F-150 and Mustang models. With an outside diameter of 14.2 inches and 164 teeth, this flexplate provides the necessary interface between the torque converter and the engine’s crankshaft. The mounting hole diameter of 11.5 mm ensures secure attachment, while the 12 pitch flywheels specification aligns with the transmission requirements of these vehicles. This flexplate is not SFI approved and does not include an SFI certification sticker, which is typical for standard OEM replacement parts.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing transmission engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses flexplate cracking or warping that leads to vibration or noise\u003c\/li\u003e\n\u003cli\u003eSolves problems related to improper tooth count affecting starter motor engagement\u003c\/li\u003e\n\u003cli\u003eRestores proper mounting fit to prevent loosening or misalignment\u003c\/li\u003e\n\u003cli\u003eEnsures smooth power transfer in Ford E-150, E-250, F-150, and Mustang automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify tooth count and mounting hole diameter match your vehicle’s specifications before installation\u003c\/li\u003e\n\u003cli\u003eInspect the torque converter and crankshaft flange for wear or damage during replacement\u003c\/li\u003e\n\u003cli\u003eUse proper torque settings on mounting bolts to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eEnsure alignment of the flexplate teeth with the starter motor gear for reliable starting\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures specific to Ford E-150, E-250, F-150, and Mustang models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-273 flexplate to meet OEM standards for fit and function. While this part is not SFI certified, it is designed to provide dependable service in compatible Ford automatic transmissions. Warranty coverage details should be confirmed with the parts distributor or manufacturer, as they may vary based on purchase location.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751404725,"sku":"BBFB-Z-273","price":88.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z273_Fro.jpg?v=1774704662"},{"product_id":"atp-parts-z-274-automatic-transmission-flexplate","title":"ATP Parts Z-274 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-274 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-274 automatic transmission flexplate is engineered for reliable performance in select Ford and Lincoln vehicles. Designed to meet OEM specifications, this flexplate ensures proper torque converter mounting and smooth power transfer for your automatic transmission system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.25 inches (336.55 mm)\u003c\/li\u003e\n\u003cli\u003eMounting hole quantity: 8\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.25 inches\u003c\/li\u003e\n\u003cli\u003eContains 12 bolt holes for torque converter attachment\u003c\/li\u003e\n\u003cli\u003eDiameter thickness: 1.188 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Ford and Lincoln models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-274 flexplate is a direct replacement part designed for automatic transmissions in various Ford and Lincoln vehicles, including the Ford F-150, F-250 Super Duty, E-350 Econoline, and Lincoln Navigator. With an outside diameter of 14.25 inches and 164 teeth, this flexplate provides the necessary engagement with the starter motor for reliable engine starting. The 8 mounting holes and 12 bolt holes for the torque converter ensure secure installation and proper alignment. The 1.188-inch thickness adds durability to withstand the stresses of transmission operation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with the following Ford and Lincoln models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord F-150 and F-150 Heritage\u003c\/li\u003e\n\u003cli\u003eFord F-250 and F-250 Super Duty\u003c\/li\u003e\n\u003cli\u003eFord F-350 Super Duty\u003c\/li\u003e\n\u003cli\u003eFord E-150 Econoline and Club Wagon\u003c\/li\u003e\n\u003cli\u003eFord E-250 and E-350 Econoline and Club Wagon\u003c\/li\u003e\n\u003cli\u003eFord Excursion and Expedition\u003c\/li\u003e\n\u003cli\u003eLincoln Blackwood and Navigator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged teeth\u003c\/li\u003e\n\u003cli\u003eVibration or noise caused by a warped or cracked flexplate\u003c\/li\u003e\n\u003cli\u003eTransmission torque converter misalignment\u003c\/li\u003e\n\u003cli\u003eFailure of the original flexplate mounting holes\u003c\/li\u003e\n\u003cli\u003eReplacement of a flexplate damaged by engine or transmission issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate matches the vehicle’s OEM specifications before installation\u003c\/li\u003e\n\u003cli\u003eCheck the torque converter bolt pattern and secure all bolts to manufacturer torque settings\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear teeth for wear or damage during installation\u003c\/li\u003e\n\u003cli\u003eUse proper alignment tools to avoid flexplate warping\u003c\/li\u003e\n\u003cli\u003eVerify that the flexplate is compatible with the vehicle’s transmission model\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-274 flexplate is manufactured to meet industry standards for durability and fitment. While this product is not SFI approved and does not include an SFI certification sticker, it is designed to meet OEM quality requirements. Warranty coverage details should be confirmed with the product provider or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751437493,"sku":"BBFB-Z-274","price":87.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z274_Fro.jpg?v=1774704662"},{"product_id":"atp-parts-z-275-automatic-transmission-flexplate","title":"ATP Parts Z-275 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-275 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-275 automatic transmission flexplate is designed specifically for select Ford and Mercury vehicles, including the Contour, Cougar, and Mystique models. Engineered to meet precise specifications, this flexplate ensures reliable performance in automatic transmission systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 11.75 inches\u003c\/li\u003e\n\u003cli\u003e138 teeth for starter engagement\u003c\/li\u003e\n\u003cli\u003e8 mounting holes with 9.0 mm diameter each\u003c\/li\u003e\n\u003cli\u003eDiameter of 0.979 inches (24.85 mm) for key fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with 12 pitch flywheels\u003c\/li\u003e\n\u003cli\u003eLine code: Atp4\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003cli\u003eSFI approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-275 flexplate is manufactured to match the exact dimensions required for proper fitment on Ford Contour, Mercury Cougar, and Mystique automatic transmissions. With an outside diameter of 11.75 inches and 138 teeth, it provides the necessary engagement for the starter motor. The 8 mounting holes, each measuring 9.0 mm in diameter, allow secure attachment to the torque converter and crankshaft. This flexplate is designed for use with 12 pitch flywheels and features a diameter of 0.979 inches, ensuring compatibility with the specified vehicle models. The absence of added weight and SFI certification indicates it is intended for standard street use rather than racing applications.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged flexplates on Ford Contour, Mercury Cougar, and Mystique automatic transmissions\u003c\/li\u003e\n\u003cli\u003eResolves issues related to starter engagement failure due to damaged teeth\u003c\/li\u003e\n\u003cli\u003eAddresses mounting instability caused by stripped or elongated mounting holes\u003c\/li\u003e\n\u003cli\u003ePrevents transmission vibration caused by flexplate imbalance or cracks\u003c\/li\u003e\n\u003cli\u003eEnsures proper torque converter alignment and secure attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your vehicle’s make, model, and transmission type before installation\u003c\/li\u003e\n\u003cli\u003eInspect the torque converter and crankshaft mounting surfaces for cleanliness and damage\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications for mounting bolts to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eCheck starter ring gear teeth for wear during installation\u003c\/li\u003e\n\u003cli\u003eEnsure the flexplate is properly aligned to prevent transmission vibration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-275 flexplate to meet OEM specifications for fit and function. While this flexplate is not SFI certified and does not include an SFI certification sticker, it is engineered for reliable performance in compatible Ford and Mercury automatic transmissions. Warranty coverage details should be confirmed with the parts provider or manufacturer, as they may vary based on purchase location and application.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751470261,"sku":"BBFB-Z-275","price":94.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z275_Fro.jpg?v=1774704662"},{"product_id":"atp-parts-z-333-automatic-transmission-flexplate","title":"ATP Parts Z-333 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-333 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-333 automatic transmission flexplate is engineered for reliable performance in Dodge heavy-duty trucks. Designed specifically for models like the Dodge D250, D350, Ram 2500, Ram 3500, W250, and W350, this flexplate ensures proper engagement between the engine and transmission.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 15.313 inches\u003c\/li\u003e\n\u003cli\u003eMounting hole quantity: 8\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 152\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.276 inches (388.975 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-333 flexplate is designed to meet the specifications required for automatic transmissions in select Dodge trucks. With an outside diameter of 15.313 inches and 8 mounting holes, it provides a secure connection to the engine’s crankshaft. The 152 teeth on the flexplate ensure proper engagement with the starter motor, facilitating smooth engine starts. Its diameter of 1.276 inches (388.975 mm) aligns with the pitch flywheels sized between 12 and 14, making it compatible with a range of factory setups. This flexplate is not SFI approved, which is typical for standard OEM replacement parts intended for street use rather than racing applications.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with the following Dodge models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDodge D250\u003c\/li\u003e\n\u003cli\u003eDodge D350\u003c\/li\u003e\n\u003cli\u003eDodge Ram 2500\u003c\/li\u003e\n\u003cli\u003eDodge Ram 3500\u003c\/li\u003e\n\u003cli\u003eDodge W250\u003c\/li\u003e\n\u003cli\u003eDodge W350\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed for use in automatic transmission systems, providing the necessary connection between the engine and transmission to transfer power efficiently.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the ATP Parts Z-333 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged flexplate teeth\u003c\/li\u003e\n\u003cli\u003eVibrations caused by flexplate imbalance or damage\u003c\/li\u003e\n\u003cli\u003eCracks or warping from heat and stress over time\u003c\/li\u003e\n\u003cli\u003eLoose mounting holes leading to transmission misalignment\u003c\/li\u003e\n\u003cli\u003eFailure of the flexplate causing transmission or engine damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate matches the exact specifications of your Dodge model and transmission type\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid loosening or damage\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment to prevent vibrations and premature wear\u003c\/li\u003e\n\u003cli\u003eUse thread locker on mounting bolts if recommended by the vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-333 flexplate to meet OEM standards for fit and function. While this part is not SFI certified, it is designed for reliable performance in compatible Dodge trucks. Warranty coverage details should be confirmed with the parts distributor or manufacturer, as they may vary based on purchase location and application.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751601333,"sku":"BBFB-Z-333","price":215.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z333_Fro.jpg?v=1774704664"},{"product_id":"atp-parts-z-336-automatic-transmission-flexplate","title":"ATP Parts Z-336 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-336 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-336 automatic transmission flexplate is designed specifically for Jeep vehicles, including the Grand Cherokee, TJ, and Wrangler models. Engineered to meet precise specifications, this flexplate ensures reliable performance and proper fitment for your transmission system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 13.813 inches\u003c\/li\u003e\n\u003cli\u003eMounting hole quantity: 6\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 10.0 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.151 inches (350.838 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-336 flexplate is manufactured to match the exact dimensions required for select Jeep models, including the Grand Cherokee, TJ, and Wrangler. With an outside diameter of 13.813 inches and 164 teeth, this flexplate provides the necessary interface between the engine’s crankshaft and the automatic transmission’s torque converter. The six mounting holes, each with a 10.0 mm diameter, ensure secure attachment and alignment. Designed for use with pitch flywheels ranging from 12 to 14, this flexplate supports smooth power transfer and consistent transmission operation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged flexplates causing transmission engagement issues\u003c\/li\u003e\n\u003cli\u003eFixes flexplate cracks or warping that lead to vibration or noise during operation\u003c\/li\u003e\n\u003cli\u003eResolves improper tooth count problems that affect starter motor engagement\u003c\/li\u003e\n\u003cli\u003eAddresses mounting hole damage that can cause misalignment or transmission damage\u003c\/li\u003e\n\u003cli\u003eSupports restoration of proper flexplate-to-flywheel fitment in Jeep Grand Cherokee, TJ, and Wrangler models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your specific Jeep model and transmission type before installation\u003c\/li\u003e\n\u003cli\u003eInspect the torque converter and flywheel for wear or damage during replacement\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications on mounting bolts to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eEnsure the flexplate teeth align correctly with the starter motor gear\u003c\/li\u003e\n\u003cli\u003eCheck for any signs of imbalance or vibration after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-336 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is engineered to provide reliable service in compatible Jeep models. Warranty coverage details should be confirmed with the parts distributor or manufacturer to ensure protection against defects.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751634101,"sku":"BBFB-Z-336","price":109.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z336_Fro.jpg?v=1774704664"},{"product_id":"atp-parts-z-338-automatic-transmission-flexplate","title":"ATP Parts Z-338 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-338 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-338 automatic transmission flexplate is designed specifically for Jeep Grand Cherokee and Wrangler models. Engineered to meet precise specifications, this flexplate ensures reliable performance and proper fitment for your vehicle's automatic transmission system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 13.813 inches\u003c\/li\u003e\n\u003cli\u003eMounting hole quantity: 6\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 10.0 mm\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.151 inches (350.838 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-338 flexplate is manufactured to match the exact dimensions required for Jeep Grand Cherokee and Wrangler automatic transmissions. With an outside diameter of 13.813 inches and six mounting holes each measuring 10.0 mm in diameter, this flexplate provides a secure connection between the engine and the torque converter. The 164 teeth on the flexplate ensure proper engagement with the starter motor, facilitating smooth engine starts. Its compatibility with pitch flywheels ranging from 12 to 14 inches makes it suitable for specific transmission setups in these Jeep models. Although this flexplate is not SFI approved, it meets the necessary standards for everyday driving and replacement needs.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged flexplates in Jeep Grand Cherokee and Wrangler automatic transmissions\u003c\/li\u003e\n\u003cli\u003eResolves issues related to starter engagement failure due to missing or damaged teeth\u003c\/li\u003e\n\u003cli\u003eAddresses vibration or noise caused by flexplate warping or cracking\u003c\/li\u003e\n\u003cli\u003eHelps restore proper torque converter alignment and transmission function\u003c\/li\u003e\n\u003cli\u003ePrevents transmission damage caused by loose or improperly mounted flexplates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate matches the exact part number Z-338 for compatibility with your Jeep model\u003c\/li\u003e\n\u003cli\u003eInspect the torque converter and mounting bolts for wear before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid loosening or damage\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment of the flexplate teeth with the starter motor ring gear\u003c\/li\u003e\n\u003cli\u003eUse thread locker on mounting bolts if recommended by the vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-338 flexplate with quality materials and precise engineering to meet OEM standards. While this flexplate is not SFI certified, it is designed for durability and reliable performance in Jeep Grand Cherokee and Wrangler automatic transmissions. Warranty coverage details should be confirmed with the parts distributor or manufacturer, as they may vary based on purchase location.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751666869,"sku":"BBFB-Z-338","price":138.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z338_Fro.jpg?v=1774704664"},{"product_id":"atp-parts-z-339-automatic-transmission-flexplate","title":"ATP Parts Z-339 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-339 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-339 automatic transmission flexplate is designed specifically for Jeep Cherokee, Comanche, and Grand Cherokee models. Engineered to meet precise specifications, this flexplate ensures reliable performance and proper fitment for your vehicle's automatic transmission system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 13.813 inches\u003c\/li\u003e\n\u003cli\u003eMounting hole quantity: 6\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.25 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.151 inches (350.838 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14\u003c\/li\u003e\n\u003cli\u003eWeight added for balance and durability\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-339 flexplate is manufactured to match the exact dimensions required for Jeep Cherokee, Comanche, and Grand Cherokee automatic transmissions. With an outside diameter of 13.813 inches and 164 teeth, it provides the necessary engagement with the starter motor for smooth engine starts. The six mounting holes, each with a diameter of 9.25 mm, ensure secure attachment to the crankshaft. This flexplate is designed for use with pitch flywheels ranging from 12 to 14, making it compatible with a range of factory configurations. The added weight feature helps maintain balance during operation, reducing vibration and wear.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates in Jeep Cherokee, Comanche, and Grand Cherokee automatic transmissions\u003c\/li\u003e\n\u003cli\u003eAddresses issues with starter engagement due to missing or damaged teeth\u003c\/li\u003e\n\u003cli\u003eCorrects mounting problems caused by bent or cracked flexplates\u003c\/li\u003e\n\u003cli\u003eHelps reduce transmission vibration and noise related to flexplate imbalance\u003c\/li\u003e\n\u003cli\u003eEnsures proper fitment for models requiring a 13.813-inch diameter flexplate with 164 teeth\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your Jeep model and transmission before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear or damage\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications when tightening mounting bolts to avoid warping\u003c\/li\u003e\n\u003cli\u003eCheck alignment carefully to prevent starter misengagement\u003c\/li\u003e\n\u003cli\u003eConsider replacing related components such as the starter or torque converter seal during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-339 flexplate to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is engineered to provide reliable service in compatible Jeep automatic transmissions. Warranty coverage details should be confirmed with the parts distributor or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751699637,"sku":"BBFB-Z-339","price":156.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z339_Fro.jpg?v=1774704665"},{"product_id":"atp-parts-z-344-automatic-transmission-flexplate","title":"ATP Parts Z-344 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-344 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-344 automatic transmission flexplate is engineered for reliable performance in select Ford vehicles. Designed specifically for models like the E-250 Econoline Club Wagon and F-350, this flexplate ensures proper engagement between the engine and transmission.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 15.719 inches\u003c\/li\u003e\n\u003cli\u003eMounting hole quantity: 9\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 155\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.310 inches (33.27 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12-14\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and does not include SFI certification sticker\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-344 flexplate is designed to meet the specifications required for automatic transmissions in Ford trucks and vans, including the E-250 Econoline Club Wagon, E-350 Econoline, and F-250 models. With an outside diameter of 15.719 inches and 9 mounting holes sized at 11.5 mm, it provides a secure fit to the crankshaft and torque converter. The 155 teeth on the flexplate ensure proper engagement with the starter motor for reliable engine starts. This flexplate is compatible with pitch flywheels ranging from 12 to 14, making it suitable for a range of Ford automatic transmission setups.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing starter engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses flexplate cracks or warping that lead to transmission vibration\u003c\/li\u003e\n\u003cli\u003eResolves improper torque converter alignment problems\u003c\/li\u003e\n\u003cli\u003eEliminates noise caused by damaged or missing teeth on the flexplate\u003c\/li\u003e\n\u003cli\u003ePrevents transmission slippage related to flexplate failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate mounting surface and crankshaft flange are clean and free of debris before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid warping\u003c\/li\u003e\n\u003cli\u003eVerify tooth alignment with the starter motor to prevent engagement issues\u003c\/li\u003e\n\u003cli\u003eInspect the torque converter pilot for proper fit during installation\u003c\/li\u003e\n\u003cli\u003eUse thread locker on mounting bolts if recommended by the vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-344 flexplate to meet OEM standards for fit and function. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is built to provide consistent performance in compatible Ford vehicles. Warranty coverage details should be confirmed with the parts distributor or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751732405,"sku":"BBFB-Z-344","price":137.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z344_Fro_0b0456fd-0a8c-485b-8126-be46598e3f56.jpg?v=1774704665"},{"product_id":"atp-parts-z-345-automatic-transmission-flexplate","title":"ATP Parts Z-345 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for Ford, Lincoln, and Mercury Vehicles\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-345 automatic transmission flexplate is engineered to meet the specific requirements of various Ford, Lincoln, and Mercury models. Designed with precision, this flexplate ensures proper engagement between the engine and transmission for smooth power transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.234 inches\u003c\/li\u003e\n\u003cli\u003eMounting hole quantity: 6\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.5 mm\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 164 teeth\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.186 inches (30.12 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eLine code: Atp4\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003cli\u003eSFI approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-345 flexplate features a 14.234-inch outside diameter and 164 teeth, designed to mesh accurately with compatible starter motors. The six mounting holes, each with an 11.5 mm diameter, provide secure attachment to the torque converter and crankshaft flange. This flexplate is suitable for use with pitch flywheels ranging from 12 to 14 inches, making it compatible with a range of automatic transmissions.\u003c\/p\u003e\u003cp\u003eThis flexplate is specifically compatible with Ford, Lincoln, and Mercury vehicles including models such as the Ford F-150, F-250, E-150 Econoline, Expedition, Mustang, and Lincoln Town Car, among others. The part number Z-345 ensures you receive the correct fitment for these applications.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing transmission engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses starter motor engagement problems due to missing or damaged teeth\u003c\/li\u003e\n\u003cli\u003eEliminates vibration or noise caused by flexplate imbalance or cracks\u003c\/li\u003e\n\u003cli\u003eRestores proper torque converter alignment for smooth shifting\u003c\/li\u003e\n\u003cli\u003ePrevents transmission damage from flexplate failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATP Parts Z-345 flexplate, ensure the mounting surface is clean and free of debris. Torque the mounting bolts to manufacturer specifications to avoid warping or loosening. Verify the tooth count and mounting hole alignment before final assembly. It is recommended to inspect the starter ring gear and replace if worn to ensure proper engagement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-345 flexplate to meet OEM standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed for reliable performance in compatible Ford, Lincoln, and Mercury automatic transmission applications. Warranty coverage details should be confirmed with the product documentation or supplier.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751765173,"sku":"BBFB-Z-345","price":95.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z345_Fro.jpg?v=1774704665"},{"product_id":"atp-parts-z-348-automatic-transmission-flexplate","title":"ATP Parts Z-348 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-348 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-348 automatic transmission flexplate is engineered for reliable performance in select Ford trucks and vans. Designed to meet the specific requirements of models like the Ford E-350 Econoline and F-250 Super Duty, this flexplate ensures proper engagement between the engine and transmission.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 15.625 inches\u003c\/li\u003e\n\u003cli\u003eMounting hole quantity: 10\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 155\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.302 inches (39.6875 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 10 to 12\u003c\/li\u003e\n\u003cli\u003eWeight added for balanced operation\u003c\/li\u003e\n\u003cli\u003eLine code: Atp4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-348 flexplate is designed specifically for automatic transmissions in Ford vehicles including the E-350 Club Wagon, E-350 Econoline, E-350 Super Duty, Excursion, F-250 HD, and F-350 Super Duty models. With an outside diameter of 15.625 inches and 10 mounting holes, it provides a secure connection to the crankshaft and torque converter. The 155 teeth on the flexplate ensure proper engagement with the starter motor for smooth engine starts. This flexplate is compatible with pitch flywheels ranging from 10 to 12, making it suitable for a range of Ford heavy-duty applications. The added weight feature helps maintain balance during operation, reducing vibration and wear.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing starter engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses flexplate cracks or warping that lead to transmission noise\u003c\/li\u003e\n\u003cli\u003eSolves vibration problems related to imbalanced flexplates\u003c\/li\u003e\n\u003cli\u003eRestores proper tooth count for reliable starter motor function\u003c\/li\u003e\n\u003cli\u003eEnsures correct fitment for Ford E-350 and F-250 Super Duty automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your specific Ford model and transmission type before installation\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter motor for wear or damage during replacement\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate distortion\u003c\/li\u003e\n\u003cli\u003eCheck alignment of the flexplate teeth with the starter motor ring gear\u003c\/li\u003e\n\u003cli\u003eUse proper tools to prevent damage to the flexplate or surrounding components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-348 flexplate is manufactured to meet industry standards for durability and fitment. While this product is not SFI approved and does not include an SFI certification sticker, it is designed to provide consistent performance in compatible Ford vehicles. ATP Parts offers a limited warranty against defects in materials and workmanship, ensuring confidence in your purchase.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751797941,"sku":"BBFB-Z-348","price":132.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z348_Fro.jpg?v=1774704665"},{"product_id":"atp-parts-z-349-automatic-transmission-flexplate","title":"ATP Parts Z-349 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-349 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-349 automatic transmission flexplate is engineered for reliable performance in select Ford, Mazda, and Mercury vehicles. Designed to meet precise specifications, this flexplate ensures proper engagement between the engine and transmission for smooth operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 11.688 inches\u003c\/li\u003e\n\u003cli\u003e138 teeth for starter engagement\u003c\/li\u003e\n\u003cli\u003e8 mounting holes with 9.37 mm diameter\u003c\/li\u003e\n\u003cli\u003eDiameter: 0.974 inches (24.74 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Aerostar, B4000, Explorer, Explorer Sport Trac, Mountaineer, and Ranger\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and no certification sticker included\u003c\/li\u003e\n\u003cli\u003ePart number: Z-349\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-349 flexplate is designed to connect the torque converter to the engine’s crankshaft in automatic transmission systems. With an outside diameter of 11.688 inches and 138 teeth, it provides the necessary interface for the starter motor to engage and start the engine. The 8 mounting holes, each measuring 9.37 mm in diameter, allow secure attachment to the crankshaft flange. This flexplate is compatible with several Ford, Mazda, and Mercury models including the Aerostar, B4000, Explorer, Explorer Sport Trac, Mountaineer, and Ranger, ensuring proper fitment and function.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing starter engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses flexplate cracks or warping that lead to vibration or noise\u003c\/li\u003e\n\u003cli\u003eResolves transmission input irregularities due to flexplate failure\u003c\/li\u003e\n\u003cli\u003eEliminates engine stalling related to flexplate misalignment\u003c\/li\u003e\n\u003cli\u003ePrevents damage to torque converter and transmission components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your vehicle’s make and model before installation\u003c\/li\u003e\n\u003cli\u003eEnsure mounting surfaces are clean and free of debris for proper fit\u003c\/li\u003e\n\u003cli\u003eTighten mounting bolts to manufacturer torque specifications\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear teeth for wear during installation\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-349 flexplate to meet industry standards for durability and performance. While this part is not SFI approved and does not include an SFI certification sticker, it is built to OEM specifications for reliable operation. Warranty coverage details should be confirmed with the parts provider or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751830709,"sku":"BBFB-Z-349","price":99.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z349_Fro.jpg?v=1774704666"},{"product_id":"atp-parts-z-429-automatic-transmission-flexplate","title":"ATP Parts Z-429 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-429 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-429 automatic transmission flexplate is designed specifically for Toyota vehicles including the 4Runner, Previa, T100, and Tacoma models. Engineered to meet precise specifications, this flexplate ensures reliable performance and proper fitment for your automatic transmission system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 11.625 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 115 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.25 inches\u003c\/li\u003e\n\u003cli\u003eDiameter: 0.969 inches (24.62 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 10\u003c\/li\u003e\n\u003cli\u003eWeight added for balance\u003c\/li\u003e\n\u003cli\u003eCompatible with Toyota 4Runner, Previa, T100, Tacoma\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-429 flexplate is a critical component in the automatic transmission system, connecting the engine's crankshaft to the torque converter. With an outside diameter of 11.625 inches and 115 teeth, it matches the specifications required for smooth engagement and reliable operation. The mounting hole diameter of 9.25 inches ensures secure attachment to the crankshaft flange. This flexplate includes weight added for balance, which helps reduce vibrations and contributes to drivetrain longevity. Designed for Toyota models such as the 4Runner, Previa, T100, and Tacoma, the Z-429 part number guarantees compatibility and proper fitment for these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged flexplates causing transmission engagement problems\u003c\/li\u003e\n\u003cli\u003eFixes issues related to flexplate cracking or warping under stress\u003c\/li\u003e\n\u003cli\u003eResolves abnormal vibrations or noise originating from the flexplate area\u003c\/li\u003e\n\u003cli\u003eAddresses improper torque converter alignment due to flexplate wear\u003c\/li\u003e\n\u003cli\u003eSupports smooth engine-to-transmission power transfer in Toyota 4Runner, Previa, T100, and Tacoma\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surface and bolt holes are clean and free of debris before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate damage\u003c\/li\u003e\n\u003cli\u003eInspect the torque converter and crankshaft flange for wear during installation\u003c\/li\u003e\n\u003cli\u003eVerify tooth engagement with the starter motor ring gear to prevent starting issues\u003c\/li\u003e\n\u003cli\u003eUse proper alignment tools if available to maintain balance and reduce vibration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-429 flexplate is manufactured to meet OEM standards for fit and function. While this product is not SFI approved and does not include an SFI certification sticker, it is engineered to provide reliable service in compatible Toyota models. ATP Parts offers a limited warranty against defects in materials and workmanship, ensuring confidence in the durability and performance of this transmission flexplate.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751961781,"sku":"BBFB-Z-429","price":143.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z429_Fro.jpg?v=1774704667"},{"product_id":"atp-parts-z-460-automatic-transmission-flexplate","title":"ATP Parts Z-460 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for GM Vehicles\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-460 automatic transmission flexplate is engineered for durability and precise fitment in a range of GM vehicles. Designed specifically for internally balanced engines with a two-piece crank seal, this flexplate ensures smooth power transfer and reliable performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.49 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003e168 teeth for accurate starter engagement\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.25 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with internally balanced engines featuring a two-piece crank seal\u003c\/li\u003e\n\u003cli\u003eFits popular GM models including Chevrolet C10, GMC Sierra, Pontiac Firebird, and Buick LeSabre\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12 to 14\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-460 flexplate is designed with a 14.125-inch outside diameter and a 2.49-inch inside diameter, making it suitable for a variety of GM automatic transmissions. With 168 teeth, it provides reliable engagement with the starter motor, reducing wear and ensuring consistent engine starts. The mounting hole diameter of 11.25 inches allows for secure installation on compatible crankshafts. This flexplate is intended for use with internally balanced engines that utilize a two-piece crank seal, a common configuration in many Chevrolet, Buick, GMC, Oldsmobile, and Pontiac models.\u003c\/p\u003e\u003ch2\u003eCompatible GM Makes and Models\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with a wide range of GM vehicles, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChevrolet C10, C20, C30, Camaro, Caprice, El Camino, Impala, Malibu, Monte Carlo, Nova\u003c\/li\u003e\n\u003cli\u003eGMC C1500, C2500, C3500, Jimmy, K5 Blazer, K10, K20, K30, Sierra\u003c\/li\u003e\n\u003cli\u003eBuick LeSabre, Century, Regal, Skylark\u003c\/li\u003e\n\u003cli\u003ePontiac Firebird, Grand Am, Grand Prix, Catalina, Parisienne\u003c\/li\u003e\n\u003cli\u003eOldsmobile Cutlass, Delta 88, 88, 98\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis flexplate addresses several transmission and engine interface issues, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacing worn or damaged flexplates to prevent starter engagement problems\u003c\/li\u003e\n\u003cli\u003eCorrect fitment for internally balanced engines with two-piece crank seals\u003c\/li\u003e\n\u003cli\u003eResolving vibration issues caused by flexplate imbalance\u003c\/li\u003e\n\u003cli\u003eEnsuring proper tooth count for starter compatibility\u003c\/li\u003e\n\u003cli\u003eMaintaining secure mounting to prevent transmission damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATP Parts Z-460 flexplate, ensure the engine is internally balanced and uses a two-piece crank seal as specified. Verify the tooth count and mounting hole diameter match your vehicle’s specifications. Use proper torque settings on mounting bolts to avoid warping or loosening. It is recommended to inspect the starter motor and ring gear for wear during installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATP Parts manufactures the Z-460 flexplate to meet OEM specifications for fit and function. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is built to provide reliable service in compatible GM vehicles. Warranty coverage details should be confirmed with the ATP Parts documentation or distributor.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385751994549,"sku":"BBFB-Z-460","price":79.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z460_Fro_5174f24f-52fb-4467-8a7c-def136cc4638.jpg?v=1774704667"},{"product_id":"atp-parts-z-463-automatic-transmission-flexplate","title":"ATP Parts Z-463 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-463 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-463 automatic transmission flexplate is engineered for reliable performance in a range of GM vehicles including Buick, Cadillac, Chevrolet, GMC, and Oldsmobile models. Designed specifically for one-piece crank seal engines, this flexplate ensures proper fitment and function in applications such as the Chevrolet Suburban, GMC Sierra, and Cadillac Escalade.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.0 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.25 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels sized 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eWeight added for balance and durability\u003c\/li\u003e\n\u003cli\u003eDesigned for one-piece crank seal engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-463 flexplate is a critical component in the automatic transmission system, connecting the engine's crankshaft to the torque converter. With an outside diameter of 14.125 inches and 168 teeth, it matches the specifications required for many GM trucks and SUVs, including the Chevrolet Blazer, GMC Jimmy, and Oldsmobile Bravada. The 2.0-inch inside diameter and 11.25-inch mounting hole diameter ensure precise alignment and secure installation. This flexplate is designed for use with one-piece crank seal engines, providing a reliable interface that supports smooth power transfer and engine operation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with a wide range of GM vehicles, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuick Roadmaster\u003c\/li\u003e\n\u003cli\u003eCadillac Brougham and Escalade\u003c\/li\u003e\n\u003cli\u003eChevrolet C10, C1500, Suburban, Tahoe, and S10 Blazer\u003c\/li\u003e\n\u003cli\u003eGMC Sierra series including K10, K1500, and Yukon\u003c\/li\u003e\n\u003cli\u003eOldsmobile models such as the Custom Cruiser and Bravada\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIts design supports pitch flywheels ranging from 12 to 14 inches, making it suitable for various engine and transmission combinations within these models.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the Z-463 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWorn or damaged flexplate teeth causing starter engagement problems\u003c\/li\u003e\n\u003cli\u003eFlexplate cracks or warping leading to vibration and noise\u003c\/li\u003e\n\u003cli\u003eImproper fitment with one-piece crank seal engines\u003c\/li\u003e\n\u003cli\u003eTransmission torque converter misalignment\u003c\/li\u003e\n\u003cli\u003eFailure due to imbalance or weight distribution issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine uses a one-piece crank seal before installation\u003c\/li\u003e\n\u003cli\u003eVerify tooth count and diameter match the vehicle’s specifications\u003c\/li\u003e\n\u003cli\u003eInspect mounting holes for proper alignment and torque to manufacturer specs\u003c\/li\u003e\n\u003cli\u003eCheck for any signs of flexplate damage or wear during installation\u003c\/li\u003e\n\u003cli\u003eBalance the flexplate if weight adjustments are necessary for smooth operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-463 flexplate is manufactured to meet OEM standards for durability and fitment. While this product is not SFI approved and does not include an SFI certification sticker, it is designed to maintain reliable performance under normal operating conditions. ATP Parts provides a limited warranty against defects in materials and workmanship, ensuring confidence in the product’s quality and longevity.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385752027317,"sku":"BBFB-Z-463","price":126.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z463_Fro.jpg?v=1774704667"},{"product_id":"atp-parts-z-484-automatic-transmission-flexplate","title":"ATP Parts Z-484 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-484 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-484 automatic transmission flexplate is designed for reliable performance in select Ford and Mercury vehicles. Engineered with precise specifications, this flexplate supports smooth power transfer in models like the Ford Explorer, Mustang, and Ranger.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 11.25 inches\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 135 teeth\u003c\/li\u003e\n\u003cli\u003eDiameter: 0.938 inches (285.75 mm)\u003c\/li\u003e\n\u003cli\u003ePitch flywheels: 12\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford and Mercury models including Explorer, Explorer Sport Trac, Mountaineer, Mustang, and Ranger\u003c\/li\u003e\n\u003cli\u003eLine code: Atp4\u003c\/li\u003e\n\u003cli\u003eNot SFI approved and no SFI certification sticker included\u003c\/li\u003e\n\u003cli\u003eNo additional weight added\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-484 flexplate is manufactured to meet the exacting dimensions required for proper fit and function in automatic transmission systems of specific Ford and Mercury vehicles. With an outside diameter of 11.25 inches and 135 teeth, it ensures accurate engagement with the starter motor for reliable engine starting. The 0.938-inch diameter and 12 pitch flywheel compatibility make it suitable for applications requiring precise alignment and balance. This flexplate is designed without added weight, maintaining the original balance characteristics of the drivetrain.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis automatic transmission flexplate is compatible with the following makes and models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Explorer\u003c\/li\u003e\n\u003cli\u003eFord Explorer Sport Trac\u003c\/li\u003e\n\u003cli\u003eMercury Mountaineer\u003c\/li\u003e\n\u003cli\u003eFord Mustang\u003c\/li\u003e\n\u003cli\u003eFord Ranger\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is intended for use in automatic transmission systems where the original flexplate has worn, cracked, or failed.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the Z-484 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged teeth\u003c\/li\u003e\n\u003cli\u003eVibrations caused by flexplate imbalance or cracks\u003c\/li\u003e\n\u003cli\u003eTransmission noise related to flexplate failure\u003c\/li\u003e\n\u003cli\u003eEngine starting difficulties linked to flexplate misalignment\u003c\/li\u003e\n\u003cli\u003eReplacement of original flexplate after mechanical damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate matches the vehicle’s original specifications, including tooth count and diameter\u003c\/li\u003e\n\u003cli\u003eInspect the crankshaft flange and starter ring gear for wear before installation\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid warping\u003c\/li\u003e\n\u003cli\u003eCheck for proper alignment to prevent starter engagement issues\u003c\/li\u003e\n\u003cli\u003eUse thread locker on bolts if recommended by the vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-484 flexplate is manufactured to meet industry standards for durability and fitment. While this part is not SFI approved and does not include an SFI certification sticker, it is engineered to provide consistent performance in compatible Ford and Mercury vehicles. Warranty coverage details should be confirmed with the parts distributor or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385752060085,"sku":"BBFB-Z-484","price":100.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z484_Fro.jpg?v=1774704668"},{"product_id":"atp-parts-z-600-automatic-transmission-flexplate","title":"ATP Parts Z-600 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of ATP Parts Z-600 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-600 automatic transmission flexplate is engineered for reliable performance in select Chevrolet and GMC trucks and vans. Designed with precision, this flexplate supports smooth torque transfer and optimal engine operation for vehicles like the Chevrolet Silverado and GMC Sierra series.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter: 14.125 inches (14.13\")\u003c\/li\u003e\n\u003cli\u003eTooth quantity: 168 teeth for accurate starter engagement\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.177 inches (358.775 mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels ranging from 12 to 14\u003c\/li\u003e\n\u003cli\u003eDesigned for automatic transmissions\u003c\/li\u003e\n\u003cli\u003eLine code: Atp4\u003c\/li\u003e\n\u003cli\u003eWeight added: No\u003c\/li\u003e\n\u003cli\u003eSFI approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-600 flexplate is manufactured to meet the specifications required for automatic transmission systems in Chevrolet and GMC vehicles. With an outside diameter of 14.125 inches and 168 teeth, it ensures proper meshing with the starter motor for reliable engine starts. The flexplate’s diameter of 1.177 inches (358.775 mm) and compatibility with pitch flywheels sized between 12 and 14 make it suitable for a range of heavy-duty applications. This part is designed specifically for models including the Chevrolet Express 1500, 2500, and 3500, as well as GMC Sierra 1500 HD, 2500 HD, and 3500 HD, among others.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis flexplate is compatible with the following Chevrolet and GMC models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Express 1500, 2500, 3500\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 HD, 2500, 2500 HD Classic, 3500, 3500 Classic\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 2500\u003c\/li\u003e\n\u003cli\u003eGMC Savana 1500, 2500, 3500\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500, 1500 HD, 2500, 2500 HD, 3500, 3500 Classic, 3500 HD\u003c\/li\u003e\n\u003cli\u003eGMC Yukon, Yukon XL 2500\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the Z-600 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged flexplate teeth\u003c\/li\u003e\n\u003cli\u003eTransmission vibration caused by a cracked or warped flexplate\u003c\/li\u003e\n\u003cli\u003eEngine misalignment affecting torque transfer efficiency\u003c\/li\u003e\n\u003cli\u003eFlexplate failure leading to transmission or engine damage\u003c\/li\u003e\n\u003cli\u003eReplacement for OEM flexplates showing signs of fatigue or wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the flexplate matches the tooth count and diameter specifications of the original part\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear and flywheel for wear before installation\u003c\/li\u003e\n\u003cli\u003eTorque all mounting bolts to manufacturer specifications to prevent loosening\u003c\/li\u003e\n\u003cli\u003eVerify proper alignment with the crankshaft and transmission input shaft\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATP Parts Z-600 flexplate is manufactured to meet industry standards for durability and fitment. While this flexplate is not SFI approved and does not include an SFI certification sticker, it is designed to provide consistent performance in compatible Chevrolet and GMC vehicles. Warranty coverage details should be confirmed with the parts provider or manufacturer.\u003c\/p\u003e","brand":"ATP Parts","offers":[{"title":"Default Title","offer_id":43385752092853,"sku":"BBFB-Z-600","price":87.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AT_Z600_Fro.jpg?v=1774704668"},{"product_id":"pioneer-cables-fra-100-automatic-transmission-flexplate","title":"Pioneer Cables FRA-100 Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for GM Vehicles\u003c\/h2\u003e\u003cp\u003eThe Pioneer Cables FRA-100 automatic transmission flexplate is engineered for durability and precise fitment. Designed specifically for a range of Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models, this flexplate ensures smooth power transfer and reliable engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.49 inches for accurate crankshaft fit\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches to match flywheel specifications\u003c\/li\u003e\n\u003cli\u003e168 teeth for proper engagement with the starter motor\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.25 inches for secure attachment\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels ranging from 12 to 14\u003c\/li\u003e\n\u003cli\u003eDiameter of 1.177 inches (358.775 mm) for balanced operation\u003c\/li\u003e\n\u003cli\u003eNon-SFI approved, no SFI certification sticker included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe FRA-100 flexplate from Pioneer Cables is designed to meet the exacting standards required for automatic transmissions in classic and modern GM vehicles. With 168 teeth and a 14.125-inch outside diameter, this flexplate provides reliable engagement with the starter motor, ensuring consistent engine starts. The 2.49-inch inside diameter and 11.25-inch mounting hole diameter allow for a precise fit on compatible crankshafts and flywheels. This flexplate supports pitch flywheels sized between 12 and 14, making it suitable for a wide range of models including Chevrolet C10, Camaro, and GMC Sierra trucks, as well as Buick LeSabre and Pontiac Firebird.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis automatic transmission flexplate is compatible with various GM makes and models, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuick LeSabre, Century, and Riviera\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro, Impala, C10, and Suburban series\u003c\/li\u003e\n\u003cli\u003eGMC Sierra, Jimmy, and K-series trucks\u003c\/li\u003e\n\u003cli\u003eOldsmobile Cutlass and Delta 88\u003c\/li\u003e\n\u003cli\u003ePontiac Firebird, Grand Prix, and Bonneville\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the FRA-100 Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter engagement problems due to worn or damaged flexplates\u003c\/li\u003e\n\u003cli\u003eVibration and imbalance caused by flexplate deformation\u003c\/li\u003e\n\u003cli\u003eTransmission noise related to flexplate misalignment\u003c\/li\u003e\n\u003cli\u003eCrankshaft and flywheel connection failures\u003c\/li\u003e\n\u003cli\u003eReplacement for cracked or broken flexplates in automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surface and crankshaft flange are clean and free of debris before installation\u003c\/li\u003e\n\u003cli\u003eVerify the tooth count and pitch flywheel compatibility prior to fitting\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications for mounting bolts to avoid warping\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear for wear during installation\u003c\/li\u003e\n\u003cli\u003eConsult vehicle-specific service manuals for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Pioneer Cables FRA-100 flexplate is manufactured to meet industry standards for durability and performance. While this product is not SFI approved and does not include an SFI certification sticker, it is built to provide reliable service in compatible GM automatic transmissions. Warranty coverage details should be confirmed with the distributor or manufacturer.\u003c\/p\u003e","brand":"Pioneer Cables","offers":[{"title":"Default Title","offer_id":43562037346485,"sku":"FRMH-FRA-100","price":64.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PC_FRA100_Fro_fd0d1684-ff70-4dd2-aa69-6871d4ca2b96.jpg?v=1774893275"},{"product_id":"pioneer-cables-fra-100hd-automatic-transmission-flexplate","title":"Pioneer Cables FRA-100HD Automatic Transmission Flexplate","description":"\u003ch2\u003eReliable Automatic Transmission Flexplate for GM Vehicles\u003c\/h2\u003e\u003cp\u003eThe Pioneer Cables FRA-100HD automatic transmission flexplate is engineered for durability and precise fitment. Designed specifically for a range of Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models, this flexplate ensures smooth power transfer and reliable engine performance.\u003c\/p\u003e\u003ch2\u003eKey Features of the FRA-100HD Flexplate\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInside diameter: 2.49 inches for accurate crankshaft fitment\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 14.125 inches to match OEM specifications\u003c\/li\u003e\n\u003cli\u003e168 teeth for proper engagement with the starter motor\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.25 inches for secure attachment\u003c\/li\u003e\n\u003cli\u003eCompatible with pitch flywheels ranging from 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eDiameter of 1.177 inches (358.775 mm) for balanced operation\u003c\/li\u003e\n\u003cli\u003eDesigned for automatic transmissions in select GM trucks and cars\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description and Compatibility\u003c\/h2\u003e\u003cp\u003eThe FRA-100HD flexplate by Pioneer Cables is built to meet the demands of various GM vehicles including Chevrolet C10, C1500, and Silverado series, Pontiac Firebird, Buick LeSabre, and GMC Suburban models. With 168 teeth and precise mounting hole dimensions, this flexplate ensures proper starter engagement and secure transmission connection. Its 14.125-inch outside diameter and 2.49-inch inside diameter provide a direct replacement for factory flexplates, maintaining engine balance and transmission alignment.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates causing starter engagement issues\u003c\/li\u003e\n\u003cli\u003eAddresses flexplate cracks or warping that lead to vibration or noise\u003c\/li\u003e\n\u003cli\u003eRestores proper transmission-to-engine connection for smooth shifting\u003c\/li\u003e\n\u003cli\u003eEliminates flexplate tooth damage that prevents engine starting\u003c\/li\u003e\n\u003cli\u003eSupports reliable torque transfer in automatic transmission setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your specific make and model before installation\u003c\/li\u003e\n\u003cli\u003eEnsure mounting surfaces are clean and free of debris for proper fit\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid flexplate damage\u003c\/li\u003e\n\u003cli\u003eInspect starter motor and flywheel condition during installation\u003c\/li\u003e\n\u003cli\u003eUse thread locker on mounting bolts if recommended by vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Pioneer Cables FRA-100HD flexplate is manufactured to meet industry standards for durability and fitment. While this product is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible GM vehicles. Warranty coverage details should be confirmed with the distributor or manufacturer.\u003c\/p\u003e","brand":"Pioneer Cables","offers":[{"title":"Default Title","offer_id":43562037805237,"sku":"FRMH-FRA-100HD","price":87.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PC_FRA100HD_Fro_694a11d5-3d5d-4100-83e3-e1b93dd52862.jpg?v=1774893275"},{"product_id":"pioneer-cables-fra-101-automatic-transmission-flexplate","title":"Pioneer Cables FRA-101 Automatic Transmission Flexplate","description":"\u003ch2\u003eOverview of Pioneer Cables FRA-101 Automatic Transmission Flexplate\u003c\/h2\u003e\u003cp\u003eThe Pioneer Cables FRA-101 is a precision-engineered automatic transmission flexplate designed for select Buick and Pontiac models. This flexplate features a 13.438-inch outside diameter and 160 teeth, ensuring reliable engagement with the starter and smooth power transfer in your vehicle's drivetrain.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutside Diameter: 13.438 inches (341.313 mm)\u003c\/li\u003e\n\u003cli\u003eTooth Quantity: 160 teeth for accurate starter engagement\u003c\/li\u003e\n\u003cli\u003eMounting Hole Diameter: 11.75 inches\u003c\/li\u003e\n\u003cli\u003ePitch Flywheels Compatibility: 12 to 14\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.120 inches\u003c\/li\u003e\n\u003cli\u003eCompatible with Buick and Pontiac models including Bonneville, Catalina, Century, Laurentian, LeSabre, Regal, Riviera, and Skylark\u003c\/li\u003e\n\u003cli\u003ePart Number: FRA-101\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe FRA-101 flexplate from Pioneer Cables is engineered to meet the specific requirements of automatic transmissions in classic and modern Buick and Pontiac vehicles. With a 160-tooth design and a 13.438-inch outside diameter, this flexplate ensures proper meshing with the starter motor, reducing wear and improving starting reliability. The 11.75-inch mounting hole diameter allows for secure attachment to the crankshaft, maintaining alignment and balance during operation. This flexplate is compatible with pitch flywheels ranging from 12 to 14, making it suitable for a range of engine configurations in the listed vehicle models.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged flexplates in Buick Bonneville and Pontiac Catalina automatic transmissions\u003c\/li\u003e\n\u003cli\u003eAddresses starter engagement issues caused by missing or damaged teeth\u003c\/li\u003e\n\u003cli\u003eCorrects vibration or imbalance problems due to flexplate warping or cracks\u003c\/li\u003e\n\u003cli\u003eRestores proper mounting alignment for smooth power transfer in Buick LeSabre and Pontiac Regal\u003c\/li\u003e\n\u003cli\u003eSupports reliable engine starting and transmission operation in Pontiac Skylark and Buick Century\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surface and crankshaft flange are clean and free of debris before installation\u003c\/li\u003e\n\u003cli\u003eVerify tooth count and diameter match the original flexplate specifications for your vehicle model\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications when securing the flexplate to avoid distortion\u003c\/li\u003e\n\u003cli\u003eInspect the starter ring gear for wear and replace if necessary to prevent starter engagement issues\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures specific to Buick and Pontiac models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Pioneer Cables FRA-101 flexplate is manufactured to meet industry standards for durability and performance. While this product is not SFI approved and does not include an SFI certification sticker, it is designed to provide reliable service in compatible Buick and Pontiac automatic transmissions. Please refer to Pioneer Cables' warranty policy for coverage details.\u003c\/p\u003e","brand":"Pioneer Cables","offers":[{"title":"Default Title","offer_id":43562038296757,"sku":"FRMH-FRA-101","price":61.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PC_FRA101_Fro_4532416b-8b62-4039-ad73-689686804b1d.jpg?v=1774893276"}],"url":"https:\/\/www.partcatalog.com\/collections\/flexplate.oembed?page=7","provider":"PartCatalog","version":"1.0","type":"link"}