{"title":"Air and Fuel Delivery \u003e Fuel Pumps and Related Components","description":"\u003cp\u003eFuel pumps keep your engine fed — whether that's a drop-in electric pump inside the tank, a complete module assembly with integrated sender, or a high-pressure direct injection pump on the cam. Most modern vehicles use an in-tank electric fuel pump rated between 40–90 PSI depending on the system; DI applications run significantly higher, often 1,500–2,900 PSI. Electric pumps typically last 100,000–150,000 miles but can fail earlier from running a low tank frequently, degraded fuel, or a clogged strainer. When replacing, match the flow rate (GPH), operating pressure, and connector type to your application. Module assemblies are the smart buy for most in-tank repairs — they include the pump, sending unit, float, and strainer as a matched set, which eliminates the guesswork of mixing components and recalibrating the fuel gauge. OEM-spec units from brands like Delphi, Denso, Carter, and Bosch carry engineering validation that bare-minimum budget pumps often lack.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine cranks but won't start, or stalls immediately after starting.\u003c\/strong\u003e A pump that can't build pressure to the injectors will leave you with no-start conditions — check fuel rail pressure first before condemning other components; spec varies by vehicle but most port-injected engines need 40–65 PSI at idle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard start when the engine is hot, but starts fine when cold.\u003c\/strong\u003e Heat causes worn pump motors to draw excessive current or fail intermittently; if the pump driver module is involved, it may also throw a U-code or reduce pump speed incorrectly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFuel gauge reads erratically, stays on empty, or pegs full.\u003c\/strong\u003e The sending unit or float inside the module has failed — common on high-mileage vehicles and a sign the full module assembly should be replaced rather than just the pump.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhining, buzzing, or droning noise from the fuel tank under load or acceleration.\u003c\/strong\u003e A healthy fuel pump runs quietly; a high-pitched whine — especially at highway speeds or under load — indicates a worn motor or cavitation from a clogged strainer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine hesitates or surges under hard acceleration or at highway speed.\u003c\/strong\u003e Intermittent pressure drops caused by a weakening pump typically show up first under high fuel demand — a fuel pressure drop test at WOT will usually confirm it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDTC codes P0087, P0088, P0191, or P0230 in the ECU.\u003c\/strong\u003e These point directly to fuel system pressure faults or pump circuit failures and are strong indicators the pump, pump driver module, or associated wiring needs attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow long does a fuel pump last, and is there a scheduled replacement interval?\u003c\/strong\u003e\n  Fuel pumps don't have a fixed replacement interval like a timing belt — they're replaced on failure or symptoms. Most electric in-tank pumps last 100,000–150,000 miles under normal use. Running the tank below a quarter frequently shortens life, since fuel cools and lubricates the pump motor. Inspect at 100k if you're doing major in-tank work anyway.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eIs it worth buying an OEM fuel pump, or is aftermarket just as good?\u003c\/strong\u003e\n  For daily drivers, quality aftermarket brands — Delphi, Carter, Denso, Bosch, Walbro — are engineered to OEM spec and often used as OEM supplier parts anyway. Avoid no-name pumps; incorrect pressure ratings, weak motor windings, and premature strainer failure are common complaints. For turbocharged or modified engines, verify the pump's flow rate (GPH) exceeds your fuel system's demand.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat else should I replace when I pull the fuel pump module?\u003c\/strong\u003e\n  Always replace the fuel strainer\/sock and the tank O-ring or seal — both are inexpensive and inaccessible without dropping the tank again. If the sending unit shows any corrosion or the float arm is bent, replace the full module assembly rather than just the pump. On GDI engines, inspect the cam follower and push rod at the same time; these wear together with the high-pressure pump.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"airtex-e2313m-fuel-pump-module-assembly","title":"Airtex E2313M Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Taurus and Mercury Sable\u003c\/h2\u003e\u003cp\u003eThe Airtex E2313M fuel pump module assembly is a direct-fit, in-tank replacement built for specific vehicle applications. It is engineered to meet or exceed OEM fit and reliability, with a fuel sending unit, gasket\/seal, and strainer included for a complete service-focused repair.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSpecific-fit fuel pump module assembly for select Ford and Mercury applications\u003c\/li\u003e\n\u003cli\u003eIn-tank electric pump with 12V operation\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for fuel level signal restoration\u003c\/li\u003e\n\u003cli\u003eStrainer included with external strainer design\u003c\/li\u003e\n\u003cli\u003eGasket\/seal included for tank sealing\u003c\/li\u003e\n\u003cli\u003eQuick-connect outlet with one outlet port\u003c\/li\u003e\n\u003cli\u003e3\/8 inch inlet fitting thread size\u003c\/li\u003e\n\u003cli\u003eRound connector shape with pin terminals and male terminal gender\u003c\/li\u003e\n\u003cli\u003eNegative ground configuration\u003c\/li\u003e\n\u003cli\u003eFlow rate of 37 and minimum pressure of 45.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAirtex E2313M is a fuel pump module assembly designed for in-tank installation on 2002-2003 Ford Taurus and 2002-2003 Mercury Sable applications. It combines the pump, sending unit, and sealing components needed for a proper fuel system repair, helping restore fuel delivery and fuel level reporting in one service part. The module is built with fuel sensor materials intended to resist corrosive fuel blends and additives, and Airtex includes application-focused components such as a high-gradient density strainer on many modules.\u003c\/p\u003e\u003cp\u003eThis part cross-references Bosch 67238 and Delphi FG0966 for the same application. For buyers searching by part number, E2313M is the Airtex reference to verify against the vehicle listing before ordering.\u003c\/p\u003e\u003ch2\u003eWhat It Is Used For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring fuel pressure when the original pump is worn or failing\u003c\/li\u003e\n\u003cli\u003eCorrecting hard-start, no-start, or stalling conditions tied to fuel delivery\u003c\/li\u003e\n\u003cli\u003eReplacing an inaccurate or nonresponsive fuel sending unit\u003c\/li\u003e\n\u003cli\u003eAddressing fuel starvation caused by a restricted or damaged strainer\u003c\/li\u003e\n\u003cli\u003eRepairing leaks at the tank seal or module interface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle application before installation: Fits 2002-2003 Ford Taurus, N\/A and Fits 2002-2003 Mercury Sable, N\/A. This is an in-tank, specific-fit module, so the tank should be safely drained and the system depressurized before service. Inspect the tank opening, electrical connector, and fuel lines for wear or contamination before installing the new module. The part number E2313M should be matched to the vehicle’s original configuration, especially when replacing an existing module assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAirtex builds its fuel system components to meet or exceed OEM fit and reliability standards. The module is designed with fuel sensor materials that resist corrosive fuel blends and additives, supporting dependable operation in modern fuel environments.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384420040885,"sku":"HYVJ-E2313M","price":114.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E2313M_Fro_85307d6e-b4bb-481b-b1f7-801d746d61ee.jpg?v=1774702614"},{"product_id":"airtex-e2527m-fuel-pump-module-assembly","title":"Airtex E2527M Fuel Pump Module Assembly - Front","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford E-Series\u003c\/h2\u003e\u003cp\u003eThe Airtex E2527M fuel pump module assembly is built for specific-fit replacement in select Ford E-150, E-250, and E-350 Super Duty applications. It combines the fuel pump, sending unit, strainer, gasket, and internal module components needed to restore fuel delivery and tank level reporting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific-fit fuel pump module assembly for in-tank installation\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, strainer, and gasket\u003c\/li\u003e\n\u003cli\u003e12V electrical pump with 60 flow rating and 50 minimum pressure\u003c\/li\u003e\n\u003cli\u003e4-wire, 4-terminal design with white rectangular connector\u003c\/li\u003e\n\u003cli\u003eQuick-connect outlet and 3\/8 inch inlet fitting thread size\u003c\/li\u003e\n\u003cli\u003ePlastic housing with blade terminals and male connector\u003c\/li\u003e\n\u003cli\u003eBuilt for OE-style fit, form, and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eAirtex E2527M is a replacement fuel pump module assembly engineered for select Ford E-Series vans. It is designed for in-tank, internal mounting and includes the fuel sending unit for accurate fuel level signal output. The module uses a 12V electrical pump, a quick-connect outlet, and a 3\/8 inch inlet fitting thread size to match the specified vehicle application. Airtex also uses fuel sensor materials intended to resist corrosive fuel blends and additives, helping support reliable operation in modern fuel systems. This part cross-references Carter P76474M for the same application. For buyers searching for a Ford E-150 fuel pump module assembly, Ford E-250 fuel pump module, or Ford E-350 Super Duty fuel pump replacement, E2527M is the direct OE-style service part.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2009-2010 Ford E-150, front. Auxiliary fuel ports are not included in this fuel pump module assembly.\u003c\/li\u003e\n\u003cli\u003eFits 2009-2010 Ford E-150, N\/A. Auxiliary fuel ports are not included in this fuel pump module assembly.\u003c\/li\u003e\n\u003cli\u003eFits 2009-2010 Ford E-250, front. Auxiliary fuel ports are not included in this fuel pump module assembly.\u003c\/li\u003e\n\u003cli\u003eFits 2009-2010 Ford E-250, N\/A. Auxiliary fuel ports are not included in this fuel pump module assembly.\u003c\/li\u003e\n\u003cli\u003eFits 2009-2010 Ford E-350 Super Duty, front.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Replacement Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFuel pump failure causing hard start or no-start conditions\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings from a worn sending unit\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure that affects drivability and engine performance\u003c\/li\u003e\n\u003cli\u003eFuel delivery issues related to a damaged in-tank module\u003c\/li\u003e\n\u003cli\u003eNoise or inconsistent operation from an aging electric pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle’s exact year, model, and fuel system configuration before installation. This module is specific fit and is intended for in-tank use only. Verify connector style, outlet type, and inlet fitting size against the original part before removal. Auxiliary fuel ports are not included on the listed Ford E-Series applications, so compare the original tank setup carefully before ordering.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAirtex fuel pump modules are built to meet or exceed OEM fit and reliability targets, with application-specific coverage and components selected for fuel system durability. The E2527M follows that OE-style approach for select Ford E-Series vans and related interchange applications.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384424235189,"sku":"HYVJ-E2527M","price":209.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E2527M_Fro_7f780bf5-9d7a-4cb3-b8fb-4dc24f2cbf08.jpg?v=1774702616"},{"product_id":"airtex-e3506m-fuel-pump-module-assembly","title":"Airtex E3506M Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for GM Vans\u003c\/h2\u003e\u003cp\u003eThe Airtex E3506M fuel pump module assembly is built for specific fitment in select Chevrolet Astro and GMC Safari applications. It combines the in-tank electric pump, fuel sending unit, gasket, strainer, wiring harness, and fuel tank pressure sensor to support reliable fuel delivery and accurate fuel level reporting.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSpecific-fit fuel pump module assembly for 2004-2005 Chevrolet Astro and 2004-2005 GMC Safari\u003c\/li\u003e\n\u003cli\u003eIn-tank electric pump with 12V operation\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for level signal output\u003c\/li\u003e\n\u003cli\u003eFuel tank pressure sensor included\u003c\/li\u003e\n\u003cli\u003eStrainer and gasket included\u003c\/li\u003e\n\u003cli\u003eWhite male connector with 4 blade terminals and 4-wire configuration\u003c\/li\u003e\n\u003cli\u003eQuick-connect outlet with 3\/8 inch inlet fitting thread size and 5\/16 inch outlet fitting thread size\u003c\/li\u003e\n\u003cli\u003eBuilt for negative-ground electrical systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAirtex E3506M is a regular-grade fuel pump module assembly engineered for direct replacement in select GM vans. It is designed for in-tank installation and uses an internal electric pump layout with a 20.0 flow rate and 62.0 minimum pressure rating. The module includes the fuel sending unit, wiring harness, strainer, gasket, and fuel tank pressure sensor, helping restore fuel delivery and tank signal function in one service part. This part cross-references Bosch 67465 and Carter P76265M for the same application. Compatible with 2004-2005 Chevrolet Astro and 2004-2005 GMC Safari, this Airtex E3506M is a practical choice when servicing fuel system performance on these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring fuel pressure after pump wear or electrical failure\u003c\/li\u003e\n\u003cli\u003eCorrecting inaccurate fuel level readings from a failing sender\u003c\/li\u003e\n\u003cli\u003eAddressing hard-start or no-start conditions related to fuel delivery\u003c\/li\u003e\n\u003cli\u003eReplacing a leaking or restricted in-tank module assembly\u003c\/li\u003e\n\u003cli\u003eResolving fuel tank pressure sensor faults tied to the module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall this module in the fuel tank using the correct vehicle-specific service procedure. Verify connector style, outlet routing, and seal condition before installation. Because mounting hardware and lock ring are not included, reuse or replace those components as needed during service. Confirm the vehicle application by year, make, model, and the note for use without Robust Fuel System Sender before ordering.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAirtex fuel system components are built to meet or exceed OEM fit and reliability targets. The module design also uses fuel sensor materials intended to resist corrosive fuel blends and additives, supporting dependable operation in modern fuel environments.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384424497333,"sku":"HYVJ-E3506M","price":102.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E3506M_Fro_3d710de4-1cf8-49d0-b591-ec5fa089571c.jpg?v=1774702617"},{"product_id":"airtex-e7167m-fuel-pump-module-assembly","title":"Airtex E7167M Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module for Sebring and Stratus\u003c\/h2\u003e\u003cp\u003eThe Airtex E7167M fuel pump module assembly is a specific-fit in-tank replacement for select 2003 Chrysler Sebring and 2003 Dodge Stratus models. It is built to match OEM fit, form, and function while supporting reliable fuel delivery and sender operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific-fit fuel pump module assembly for in-tank use\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, gasket or seal, and strainer\u003c\/li\u003e\n\u003cli\u003e12V electric pump with 50.0 minimum pressure and 25 flow rating\u003c\/li\u003e\n\u003cli\u003e4-wire design with female oval connector and blade terminals\u003c\/li\u003e\n\u003cli\u003ePlastic housing with quick-connect outlet and port inlet\u003c\/li\u003e\n\u003cli\u003eFuel sensor design resists corrosive fuel blends and additives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for OE-Style Fuel Delivery\u003c\/h2\u003e\u003cp\u003eAirtex E7167M is engineered as a direct replacement fuel pump module for 2003 Chrysler Sebring and 2003 Dodge Stratus applications. The module includes the fuel sending unit and external strainer, and it uses a 4-wire electrical layout with a 300.0 wiring harness length, white connector, and 20-gauge wiring. The assembly is designed for in-tank installation and uses a quick-connect outlet for service-friendly fuel line connection. This part cross-references Bosch 67676 and Delphi FG0427 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eIncorrect fuel gauge readings from a worn sender\u003c\/li\u003e\n\u003cli\u003eFuel pump noise associated with a failing in-tank module\u003c\/li\u003e\n\u003cli\u003eDriveability issues tied to degraded pump performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle uses the listed specific-fit in-tank configuration before installation. Inspect the tank sealing surface, electrical connector, and fuel lines for wear or contamination before transferring the module into service. Because mounting hardware and lock ring are not included, reuse or source the required vehicle-specific retaining components as needed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAirtex fuel pump modules are built to meet or exceed OEM fit and reliability targets. The brand’s fuel system design emphasizes coverage, correct fitment, and resistance to modern fuel blends, making the E7167M a practical replacement for Chrysler Sebring and Dodge Stratus fuel system service.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384424988853,"sku":"HYVJ-E7167M","price":126.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E7167M_Fro_235a6123-e310-40b8-80ac-8370f592ee7f.jpg?v=1774702617"},{"product_id":"airtex-e7172m-fuel-pump-module-assembly","title":"Airtex E7172M Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Chrysler and Dodge\u003c\/h2\u003e\u003cp\u003eAirtex E7172M is an in-tank fuel pump module assembly built for specific vehicle applications in the Chrysler and Dodge lineup. It combines the fuel pump, sending unit, and sealing components needed to restore fuel delivery and tank level reporting in one OE-style assembly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSpecific-fit fuel pump module assembly for direct application matching\u003c\/li\u003e\n\u003cli\u003eIn-tank electric pump with 12V operation\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for fuel level signal restoration\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for tank sealing\u003c\/li\u003e\n\u003cli\u003eStrainer included with internal strainer design\u003c\/li\u003e\n\u003cli\u003eQuick-connect outlet and oval 4-terminal blade connector\u003c\/li\u003e\n\u003cli\u003eNegative ground electrical design\u003c\/li\u003e\n\u003cli\u003ePOM housing material for fuel system durability\u003c\/li\u003e\n\u003cli\u003eMinimum pressure rating of 58.0 and flow rate of 20\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Airtex E7172M fuel pump module assembly is engineered to meet or exceed OEM fit and reliability for specific Chrysler Town \u0026amp; Country, Chrysler Voyager, Dodge Caravan, and Dodge Grand Caravan applications. Airtex builds its fuel system components with attention to fit, form, and function, and this module includes the fuel sending unit, gasket or seal, and strainer needed for a complete in-tank service replacement. The design also uses fuel sensor materials selected to resist corrosive fuel blends and additives, helping maintain consistent fuel level readings over time. This part cross-references Spectra Premium SP7172M for the same application.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2005-2007 Chrysler Town \u0026amp; Country, N\/A, except Stow and Go Seats\u003c\/li\u003e\n\u003cli\u003eFits 2004 Chrysler Town \u0026amp; Country, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004-2007 Chrysler Voyager, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004-2007 Dodge Caravan, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2005-2007 Dodge Caravan, N\/A, except Stow and Go Seats\u003c\/li\u003e\n\u003cli\u003eFits 2004 Dodge Grand Caravan, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004 Dodge Grand Caravan, N\/A, without Rear Auxiliary Tank\u003c\/li\u003e\n\u003cli\u003eFits 2005-2007 Dodge Grand Caravan, N\/A, except Stow and Go Seats\u003c\/li\u003e\n\u003cli\u003eFits 2005 Dodge Grand Caravan, N\/A, except Export; except Stow and Go Seats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Helps Resolve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak or failing in-tank fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel gauge inaccuracies from a worn sending unit\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure conditions affecting engine performance\u003c\/li\u003e\n\u003cli\u003eIntermittent fuel pump operation from internal wear\u003c\/li\u003e\n\u003cli\u003eFuel tank service issues related to a damaged seal or strainer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s exact configuration before ordering, especially Stow and Go seat packages, export models, and the 2004 Grand Caravan without rear auxiliary tank note. Confirm connector style, outlet type, and tank access before installation. Clean the tank area thoroughly, inspect the fuel tank for contamination, and replace any damaged sealing surfaces during service.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAirtex Fuel Systems components are built for OE-style fit and reliability, with application-specific coverage and fuel sensor materials selected for resistance to corrosive fuel blends and additives. The E7172M is a specific-fit replacement for Chrysler and Dodge fuel system service.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384425611445,"sku":"HYVJ-E7172M","price":117.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E7172M_Fro_3fb3f7f3-6c0a-41df-bf83-ab54cbe2542a.jpg?v=1774702617"},{"product_id":"airtex-e8119-electric-fuel-pump","title":"Airtex E8119 Electric Fuel Pump - In-Tank","description":"\u003ch2\u003eElectric In-Tank Fuel Pump for Buick Park Avenue\u003c\/h2\u003e\u003cp\u003eThe Airtex E8119 is a specific-fit electric in-tank fuel pump for 1991-1995 Buick Park Avenue applications. It is built for 12V systems, negative-ground vehicles, and direct in-tank fuel delivery with OE-style fit, form, and function.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric in-tank fuel pump for specific applications\u003c\/li\u003e\n\u003cli\u003eFits 1991-1995 Buick Park Avenue, in-tank\u003c\/li\u003e\n\u003cli\u003e12V, negative-ground design with 2-wire blade terminals\u003c\/li\u003e\n\u003cli\u003ePort inlet with strainer-style inlet and 1 nipple outlet\u003c\/li\u003e\n\u003cli\u003eGasket included; fuel sending unit not included\u003c\/li\u003e\n\u003cli\u003eSquare connector shape with male connector and terminal ends\u003c\/li\u003e\n\u003cli\u003eMinimum pressure: 47.0; minimum flow rating: 21\u003c\/li\u003e\n\u003cli\u003eOutlet fitting thread size: 5\/16 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication Details\u003c\/h2\u003e\u003cp\u003eAirtex E8119 is an internal, in-tank electric fuel pump engineered for direct replacement use in the Buick Park Avenue. The pump is designed to meet or exceed OE specifications in fit, form, and function, with quiet operation and consistent fuel delivery for the 1991-1995 Buick Park Avenue, in-tank application. This part cross-references Carter P74224 and Delphi FE0486 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Fuel Delivery Issues\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stumble under load\u003c\/li\u003e\n\u003cli\u003eLoss of fuel delivery from a failing in-tank pump\u003c\/li\u003e\n\u003cli\u003eIntermittent drivability problems related to inconsistent pump output\u003c\/li\u003e\n\u003cli\u003eFuel pressure below specification on Buick Park Avenue models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses the correct in-tank configuration before installation. This pump uses a square male connector, 2 blade terminals, and a 5\/16 inch outlet fitting. The gasket is included, while the fuel sending unit, wiring harness, mounting hardware, strainer, and seal-and-lock ring are not included. Confirm hose, clamp, and tank seal requirements against the vehicle before assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAirtex enhanced electric in-tank fuel pumps are 100% quality tested before release. The E8119 is built to deliver quiet operation, durable service, and OE-level performance for Buick Park Avenue fuel system repair.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384426528949,"sku":"HYVJ-E8119","price":57.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E8119_Fro_ed45485c-e849-4d5d-9f89-5dc710aa1233.jpg?v=1774702619"},{"product_id":"airtex-e8368m-fuel-pump-module-assembly","title":"Airtex E8368M Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Audi and Volkswagen\u003c\/h2\u003e\u003cp\u003eThe Airtex E8368M fuel pump module assembly is a specific-fit, in-tank electric fuel delivery component for select Audi and Volkswagen applications. Built for 12V operation with a 32 flow rating, it includes a gasket\/seal and strainer to support reliable fuel delivery in the tank.\u003c\/p\u003e\u003cp\u003eFits 1998-2005 Volkswagen Passat, without flange. Fits 1998-2004 Audi A6, without flange. Fits 1998-2004 Audi A6 Quattro, without flange.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAirtex fuel pump module assembly, part number E8368M\u003c\/li\u003e\n\u003cli\u003eSpecific-fit design for select Audi A6, Audi A6 Quattro, and Volkswagen Passat applications\u003c\/li\u003e\n\u003cli\u003eIn-tank electric pump with 12V electrical operation\u003c\/li\u003e\n\u003cli\u003e32 flow rating for fuel delivery performance\u003c\/li\u003e\n\u003cli\u003eIncludes gasket\/seal and strainer\u003c\/li\u003e\n\u003cli\u003eMale connector with 2 terminals and pin-style terminal type\u003c\/li\u003e\n\u003cli\u003eHose connection outlet with 1.0 outlet outside diameter\u003c\/li\u003e\n\u003cli\u003eNegative ground configuration\u003c\/li\u003e\n\u003cli\u003eFuel sending unit, regulator, lock ring, mounting hardware, wiring harness, and filter not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAirtex E8368M is a fuel pump module assembly engineered for direct replacement in select Audi and Volkswagen fuel systems. It is built as an in-tank, internal electric pump module with specific fitment and OE-style form and function. The module uses a strainer inlet, hose connection outlet, and a male 2-terminal pin connector, with a gasket\/seal included for service replacement. Airtex designs these modules to meet or exceed OEM fit and reliability expectations, and the fuel sensor design is intended to resist corrosive fuel blends and additives.\u003c\/p\u003e\u003cp\u003eThis part cross-references Bosch 69361 and Carter P76029M for the same application. Search terms such as Audi A6 fuel pump module assembly, Volkswagen Passat in-tank fuel pump, and Airtex E8368M replacement fuel pump module are commonly used for this part.\u003c\/p\u003e\u003ch2\u003eWhat It Is Used For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring fuel delivery when the original in-tank pump is no longer maintaining pressure\u003c\/li\u003e\n\u003cli\u003eAddressing hard-start or no-start conditions related to fuel supply\u003c\/li\u003e\n\u003cli\u003eCorrecting fuel starvation under load or at higher demand\u003c\/li\u003e\n\u003cli\u003eReplacing a worn module in Audi A6, Audi A6 Quattro, or Volkswagen Passat fuel systems\u003c\/li\u003e\n\u003cli\u003eServicing a vehicle with a damaged or restricted pump strainer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s flange configuration before ordering, since this application is listed without flange. Confirm connector style, outlet routing, and tank access before installation. Replace the tank seal during service, and inspect the fuel tank for contamination that could shorten pump life. Because this module is specific fit, match the vehicle year, make, and model exactly to the listed applications.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAirtex positions this fuel pump module line as an OE-style replacement built for fit, form, and function. The module is designed for reliable operation in demanding fuel environments and uses materials intended to handle modern fuel blends and additives.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384427086005,"sku":"HYVJ-E8368M","price":75.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E8368M_Fro_7167404c-f669-4c88-9a4b-389c59858718.jpg?v=1774702620"},{"product_id":"airtex-e8389m-fuel-pump-module-assembly","title":"Airtex E8389M Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Mercedes-Benz ML320 and ML430\u003c\/h2\u003e\u003cp\u003eThe Airtex E8389M fuel pump module assembly is a specific-fit, in-tank electric replacement for select Mercedes-Benz ML320 and ML430 models. Built for OEM-style fit, form, and function, it includes a gasket and uses a quick-connect outlet for straightforward fuel system service.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSpecific-fit fuel pump module assembly for confirmed Mercedes-Benz applications\u003c\/li\u003e\n\u003cli\u003eIn-tank, internal electric pump design\u003c\/li\u003e\n\u003cli\u003eBlade terminal type with oval male connector\u003c\/li\u003e\n\u003cli\u003eQuick-connect outlet and 3\/8 inch inlet fitting thread size\u003c\/li\u003e\n\u003cli\u003e5\/16 inch outlet fitting thread size\u003c\/li\u003e\n\u003cli\u003eFlow rate of 27 and minimum pressure of 61.0\u003c\/li\u003e\n\u003cli\u003eGasket included; mounting hardware not included\u003c\/li\u003e\n\u003cli\u003eStrainer inlet type for fuel pickup support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAirtex E8389M is engineered as a fuel pump module assembly for vehicles that require a direct-fit in-tank replacement. Airtex builds its fuel system components to meet or exceed OEM fit and reliability, and this module follows that approach with a specific application design, electrical pump operation, and connector and terminal details matched to the vehicle platform. The fuel sensor design is intended to resist corrosive fuel blends and additives, helping maintain consistent fuel delivery performance in demanding service conditions. This part cross-references Delphi FG1162 for the same application.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1998-2001 Mercedes-Benz ML320, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1999-2001 Mercedes-Benz ML430, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Fuel System Issues It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel delivery\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent fuel pressure\u003c\/li\u003e\n\u003cli\u003eStalling related to a failing in-tank pump module\u003c\/li\u003e\n\u003cli\u003eFuel starvation symptoms under load\u003c\/li\u003e\n\u003cli\u003eFuel gauge or sender-related service needs when replacing the module assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the connector shape, terminal type, inlet and outlet sizes, and vehicle fitment before installation. Replace the tank seal during service, and inspect the fuel tank, lines, and electrical connector for wear or contamination before installing the new module. Because mounting hardware and wiring harness are not included, reuse or source the required vehicle-specific components as needed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAirtex fuel pump modules are built to meet or exceed OEM fit and reliability standards. The E8389M is designed for direct replacement service on the listed Mercedes-Benz ML320 and ML430 applications.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384427151541,"sku":"HYVJ-E8389M","price":124.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E8389M_Fro.jpg?v=1774702620"},{"product_id":"autobest-f1009a-fuel-pump-and-sender-assembly","title":"Autobest F1009A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ford and Mercury\u003c\/h2\u003e\u003cp\u003eThe Autobest F1009A is a fuel pump and sender assembly built for 1989-1997 Ford Thunderbird and 1989-1997 Mercury Cougar applications. It combines the pump and sending unit in one in-tank module for a direct replacement on vehicles that need accurate fuel delivery and fuel level reporting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine pump design with 12V operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 36 GPH and 80-100 PSI pressure range\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for level signal restoration\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet with 1 elliptic connector\u003c\/li\u003e\n\u003cli\u003eMale terminals, 4-pin PIN terminal type\u003c\/li\u003e\n\u003cli\u003eStrainer and tank seal included; NBR gasket material\u003c\/li\u003e\n\u003cli\u003eBuilt for ethanol-tolerant fuel systems\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eAutobest F1009A is a complete fuel pump and sender assembly for Ford Thunderbird and Mercury Cougar models listed in the fitment data. It is engineered as an in-tank performance-grade replacement with a turbine-style pump, external strainer, and integrated sending unit to support both fuel supply and fuel level feedback. The assembly uses top-grade components and is tested during manufacturing to help maintain consistent output and electrical performance. This part cross-references Airtex Fuel Pumps E2098S and Carter P74651S for the same application.\u003c\/p\u003e\u003cp\u003eFor shoppers searching for a 1989-1997 Ford Thunderbird fuel pump and sender assembly or a 1989-1997 Mercury Cougar fuel pump module, the F1009A provides the core components needed for a complete fuel system service. The unit is designed for modern fuel blends and includes the seal and strainer needed for installation in the tank.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eIncorrect fuel gauge readings from a worn sender\u003c\/li\u003e\n\u003cli\u003eFuel starvation from a failing in-tank pump\u003c\/li\u003e\n\u003cli\u003eNoise or drivability issues related to an aging fuel module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify connector style, outlet size, and sender resistance before installation. This assembly uses a 3\/8 in. quick-connect outlet, a male elliptic connector, and a 4-pin PIN terminal layout. Because it is an in-tank module, inspect the tank, wiring, and fuel lines before reassembly to help prevent repeat failures. Confirm fitment for your exact Ford Thunderbird or Mercury Cougar year before ordering.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest builds this fuel pump and sender assembly with top-quality materials and tests it throughout the manufacturing process. The F1009A is supplied with a 12 Month Unlimited Mileage Warranty and is intended for ethanol-tolerant fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784271029,"sku":"FKDT-F1009A","price":84.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1009A_Fro.jpg?v=1774704973"},{"product_id":"autobest-f1011-electric-fuel-pump","title":"Autobest F1011 Electric Fuel Pump","description":"\u003ch2\u003eAutobest F1011 Electric Fuel Pump Overview\u003c\/h2\u003e\u003cp\u003eThe Autobest F1011 electric fuel pump is a 12V external rollervane pump built for high-pressure fuel delivery in older Ford, Mercury, and Lincoln applications. It is supplied as a pump and kit for a complete installation, with the strainer sold separately, and it uses ethanol-tolerant materials for modern fuel blends.\u003c\/p\u003e\u003cp\u003eFor drivers servicing a Ford F-150 fuel system, a Mustang fuel pump replacement, or an external pump on an Econoline van, the Autobest F1011 is built around consistent flow, pressure, and electrical demand. This part number is also listed as a cross-reference to Airtex E2000 and Bosch 69100 for the same application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e12V electric fuel pump with a rollervane design\u003c\/li\u003e\n\u003cli\u003eExternal mounting style for in-line fuel system service\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 23.78 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range of 72.52 to 94.27 PSI\u003c\/li\u003e\n\u003cli\u003eAverage current draw of 4 amps\u003c\/li\u003e\n\u003cli\u003eTwo screw-style connectors and two threaded terminals\u003c\/li\u003e\n\u003cli\u003eBarb inlet and barb outlet for fuel line connection\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested during manufacturing\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for today’s fuel systems\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump line focuses on dependable fuel delivery for performance and service replacement needs. The F1011 is an external, high-pressure pump that supports a wide range of Ford truck, van, and car applications from the 1980s and early 1990s, including 1985-1989 Ford Bronco, 1985-1989 Ford F-150, 1987-1991 Ford E-350 Econoline, and 1983-1984 Mercury Cougar. It is also listed for 1984-1986 Ford LTD and 1983-1984 Lincoln Continental applications.\u003c\/p\u003e\u003cp\u003eWith a compact footprint and barb-style inlet and outlet, this pump is suited to fuel system repairs where stable pressure and ethanol resistance matter. The Autobest F1011 part number appears in interchange listings with several OE-style references, making it a practical choice when replacing an external high-pressure pump on classic Ford-based platforms.\u003c\/p\u003e\u003ch2\u003eCommon Fuel System Problems It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load or acceleration\u003c\/li\u003e\n\u003cli\u003eFailure of an aging external high-pressure pump\u003c\/li\u003e\n\u003cli\u003eService replacement for ethanol-exposed fuel systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment Tips\u003c\/h2\u003e\u003cp\u003eFits 1986-1991 Ford E-150 Econoline, N\/A. Fits 1986-1991 Ford E-150 Econoline Club Wagon, N\/A. Fits 1986-1991 Ford E-250 Econoline, N\/A. Fits 1987-1991 Ford E-250 Econoline Club Wagon, N\/A. Fits 1987-1991 Ford E-350 Econoline, N\/A. Fits 1987-1991 Ford E-350 Econoline Club Wagon, N\/A. Fits 1985-1989 Ford Bronco, N\/A. Fits 1985-1989 Ford F-150, N\/A. Fits 1985-1989 Ford F-250, N\/A. Fits 1987-1989 Ford F-350, N\/A. Fits 1986-1988 Ford Bronco II, N\/A. Fits 1985-1988 Ford Ranger, N\/A.\u003c\/p\u003e\u003cp\u003eAdditional fitments include 1987 Ford Aerostar, In-Line; 1986 Ford Aerostar, N\/A; 1985-1986 Ford F-350, In-Line; 1984-1986 Ford LTD, N\/A; 1984-1986 Mercury Marquis, N\/A; 1985 and 1983-1985 Ford Mustang, N\/A; 1985 Mercury Capri, N\/A; 1983-1984 Ford Thunderbird, N\/A; 1983-1984 Lincoln Continental, N\/A; 1984 Lincoln Mark VII, N\/A; 1983-1984 Mercury Capri, N\/A; and 1983-1984 Mercury Cougar, N\/A.\u003c\/p\u003e\u003cp\u003eBecause this application is externally mounted and some vehicles may require a second in-tank pump, verify the fuel system layout before installation. The strainer is sold separately, so confirm the correct filtration setup for your vehicle and fuel line routing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests pumps throughout the manufacturing process to help maintain consistent output and durability. The F1011 is backed by a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784303797,"sku":"FKDT-F1011","price":58.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1011_Fro.jpg?v=1774704973"},{"product_id":"autobest-f1012-electric-fuel-pump","title":"Autobest F1012 Electric Fuel Pump","description":"\u003ch2\u003eAutobest F1012 Electric Fuel Pump\u003c\/h2\u003e\u003cp\u003eThe Autobest F1012 is an in-tank electric fuel pump for 12V fuel systems that need steady pressure and consistent delivery. It uses a turbine-style pump design, supports performance-grade applications, and is built with ethanol-tolerant materials for modern fuel blends.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e12V electric fuel pump with a 6 amp average current draw\u003c\/li\u003e\n\u003cli\u003e110 GPH average flow rating for dependable fuel delivery\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design with one male tube\/barb outlet\u003c\/li\u003e\n\u003cli\u003eMale pin connector layout with 2 connectors and 2 terminals\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 123.25 PSI and minimum pump pressure of 79.8 PSI\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested throughout manufacturing\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for today’s fuel systems\u003c\/li\u003e\n\u003cli\u003eIncludes accessories needed for a complete installation; strainer sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest Electric Fuel Pump F1012 is a performance-grade replacement for a range of Ford and Mazda applications, including Ford Aerostar, Ford Ranger, Ford Taurus, Ford Explorer, Mazda B2300, Mazda B3000, and Mazda B4000. It is also listed for Mercury Grand Marquis and Mercury Topaz applications. This part cross-references Airtex Fuel Pumps E2001 and Carter P90094 for the same application.\u003c\/p\u003e\u003cp\u003eThe Autobest Electric Fuel Pump line focuses on quality materials and consistent manufacturing checks. The F1012 is supplied as an in-tank turbine pump with a filter-style inlet, external strainer arrangement, and no regulator or gasket\/seal included. Its compact size and 12V electrical setup make it a direct replacement choice for fuel delivery service on older Ford and Mazda platforms.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation under load from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel starvation in worn in-tank pump systems\u003c\/li\u003e\n\u003cli\u003eLoss of pressure that affects acceleration and drivability\u003c\/li\u003e\n\u003cli\u003eFuel pump failure on select Ford Ranger and Mazda B-series applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 1990-1997 Ford Aerostar, N\/A; 1990-1997 Ford Ranger, N\/A; 1994-1997 Mazda B2300, N\/A; 1997 Mazda B3000, In-Tank; 1994-1997 Mazda B4000, N\/A; 1994-1996 Mazda B3000, N\/A; 1989-1995 Ford Taurus, N\/A; 1991-1994 Ford Explorer, N\/A; 1990-1991 Ford LTD Crown Victoria, N\/A; 1988-1991 Ford Tempo, N\/A; 1990-1991 Mercury Grand Marquis, N\/A; 1988-1991 Mercury Topaz, N\/A; 1989 Ford Aerostar, N\/A.\u003c\/p\u003e\u003cp\u003eVerify tank configuration, connector style, and outlet routing before installation. A strainer is required for warranty validation on listed applications, and the tank seal requirement varies by vehicle notes. Confirm the vehicle’s fuel system specifications before replacing the pump.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests pumps throughout the manufacturing process to help maintain consistent output and durability. The F1012 is backed by a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784402101,"sku":"FKDT-F1012","price":36.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1012_Fro.jpg?v=1774704973"},{"product_id":"autobest-f1013-electric-fuel-pump","title":"Autobest F1013 Electric Fuel Pump","description":"\u003ch2\u003eElectric Fuel Pump for Ford and Mazda Applications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1013 is an in-tank electric fuel pump built for select Ford, Mazda, and Mercury applications from 1986-1997. It uses a gerotor design, 12V operation, and a performance-grade construction to support steady fuel delivery in older fuel systems, including Ford Ranger and Mazda B-Series trucks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank electric fuel pump with gerotor pump type\u003c\/li\u003e\n\u003cli\u003e12V operation with 6 amp average current draw\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 27.74 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range of 79.77 to 108.78 PSI\u003c\/li\u003e\n\u003cli\u003eMale pin-style connector with 2 terminals\u003c\/li\u003e\n\u003cli\u003eInternal strainer included; strainer sold separately in manufacturer notes for complete installation requirements\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested throughout manufacturing\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1013 is an electric fuel pump for select Ford Ranger, Mazda B2300, Mazda B3000, Mazda B4000, Mazda Navajo, Ford Escort, Ford Aerostar, and Mercury Lynx applications. It is an in-tank, performance-grade fuel pump with a filter-style inlet, male tube\/barb outlet, and male pin connector layout for direct replacement use in the listed vehicles. This part cross-references Airtex Fuel Pumps E2002 and Carter P90033 for the same application.\u003c\/p\u003e\u003cp\u003eFor buyers searching for a Ford Ranger fuel pump, Mazda B-Series electric fuel pump, or Ford Aerostar in-tank fuel pump, the F1013 provides a focused replacement option with ethanol-tolerant materials and a compact footprint. Part number F1013 is also a useful reference when matching fuel delivery components for 1986-1997 Ford and Mazda platforms.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation under load from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel starvation in aging in-tank pump assemblies\u003c\/li\u003e\n\u003cli\u003eLoss of pressure in Ford Ranger and Mazda B-Series fuel systems\u003c\/li\u003e\n\u003cli\u003ePoor drivability related to worn electric fuel pump components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify vehicle fitment by year, make, and model before ordering. This pump is designed for in-tank installation and uses a filter inlet with a male pin connector. The manufacturer notes that the strainer is required for warranty validation on listed applications, and some fitments also reference a tank seal. Confirm the correct fuel system configuration for your Ford Ranger, Mazda B2300, Mazda B3000, Mazda B4000, Mazda Navajo, Ford Escort, Ford Aerostar, or Mercury Lynx before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that only top-quality materials are used and that each pump is tested during manufacturing to help ensure consistent performance. The F1013 is backed by a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784434869,"sku":"FKDT-F1013","price":37.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1013_Fro_6cecb5cb-1963-4766-aab3-1eb6c409c0bd.jpg?v=1774704974"},{"product_id":"autobest-f1055-electric-fuel-pump","title":"Autobest F1055 Electric Fuel Pump","description":"\u003ch2\u003eAutobest F1055 Electric Fuel Pump Overview\u003c\/h2\u003e\u003cp\u003eThe Autobest F1055 is an in-tank electric fuel pump built for performance-focused fuel delivery in select Ford, Mercury, and Lincoln applications. It uses a turbine pump design, 12V operation, and ethanol-tolerant materials to support modern fuel systems, including long-running service in vehicles such as the Ford Thunderbird, Ford Windstar, and Mercury Cougar.\u003c\/p\u003e\u003cp\u003eAutobest Electric Fuel Pump products are built around top-grade components and tested throughout manufacturing for consistent output and fit. The F1055 includes the accessories needed for a complete installation, while the strainer is sold separately.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank electric fuel pump with turbine-style operation\u003c\/li\u003e\n\u003cli\u003e12V system with 8 amp average current draw\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 150 GPH for fuel delivery support\u003c\/li\u003e\n\u003cli\u003eOperating pressure range of 79.8 to 123.25 PSI\u003c\/li\u003e\n\u003cli\u003eMale connector and male terminal design with 2 connectors and 2 terminals\u003c\/li\u003e\n\u003cli\u003eInternal strainer included; external strainer not used\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for today’s fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1055 electric fuel pump is engineered for in-tank installation and direct fuel system service where stable pressure and consistent flow are required. With a barb outlet, filter-style inlet, and turbine pump construction, it supports dependable fuel transfer in applications that demand performance-grade delivery. This part number, F1055, is listed for 1985-1997 Ford Thunderbird, 1989-1997 Mercury Cougar, and 1995-1997 Ford Windstar applications, along with additional Ford, Mercury, and Lincoln fitments shown below.\u003c\/p\u003e\u003cp\u003eAutobest’s Electric Fuel Pump line focuses on quality materials and tested construction for fuel system replacement work. The F1055 cross-references Airtex E2044 and Carter P90023 for the same application. It is also listed with fitment for 1991-1994 Ford Tempo and Mercury Topaz, 1988-1992 Lincoln Mark VII, 1990-1992 Lincoln Town Car, and 1992 Ford Crown Victoria and Mercury Grand Marquis applications.\u003c\/p\u003e\u003ch2\u003eWhat This Fuel Pump Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load or at higher demand\u003c\/li\u003e\n\u003cli\u003ePoor drivability related to an aging in-tank pump\u003c\/li\u003e\n\u003cli\u003eFuel system service needs on select Ford, Mercury, and Lincoln models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1985-1997 Ford Thunderbird, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1997 Ford Windstar, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1989-1997 Mercury Cougar, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1985-1986 Mercury Cougar, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1995-1996 Ford Windstar, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1991-1994 Ford Tempo, In-Tank\u003c\/li\u003e\n\u003cli\u003eFits 1991-1994 Mercury Topaz, In-Tank\u003c\/li\u003e\n\u003cli\u003eFits 1992 Ford Crown Victoria, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1988-1992 Lincoln Mark VII, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1990-1992 Lincoln Town Car, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1992 Mercury Grand Marquis, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1986-1987 Lincoln Mark VII, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm tank configuration and vehicle build details before ordering, especially for Windstar applications with USA-built or Canadian-built notes. The manufacturer notes that a strainer is required to validate warranty coverage on certain applications, and the F1055 strainer is sold separately.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that only top-grade components are used in this fuel pump line, and each pump is tested throughout the manufacturing process. The F1055 is backed by a limited lifetime warranty and is built with ethanol-tolerant materials for modern fuel blends.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784631477,"sku":"FKDT-F1055","price":35.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1055_Fro.jpg?v=1774704975"},{"product_id":"autobest-f1060a-fuel-pump-and-strainer-set","title":"Autobest F1060A Fuel Pump and Strainer Set","description":"\u003ch2\u003eFuel Pump and Strainer Set for Ford Applications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1060A fuel pump and strainer set is built for in-tank fuel delivery on select Ford, Mercury, and related applications. It combines the pump and strainer components needed for a complete installation, with ethanol-tolerant materials suited to modern fuel blends.\u003c\/p\u003e\u003cp\u003eAutobest’s Fuel Pump and Strainer Set line focuses on top-grade components and manufacturing checks throughout production. This F1060A assembly is a performance-grade, 12V turbine-style pump with a 7 amp average current draw and a 135 GPH average flow rating.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAutobest F1060A fuel pump and strainer set for in-tank fuel delivery\u003c\/li\u003e\n\u003cli\u003ePerformance-grade turbine pump with 12V operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 135 GPH and average current draw of 7A\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for today’s fuel systems\u003c\/li\u003e\n\u003cli\u003eIncludes gasket\/seal with NBR material\u003c\/li\u003e\n\u003cli\u003eNegative-ground design with one outlet and metallic conduit outlet type\u003c\/li\u003e\n\u003cli\u003eHousing material: POM\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Strainer Set is engineered for direct fuel system service where an in-tank pump assembly is required. The F1060A is a turbine pump with a minimum pressure of 7.25 PSI and maximum pressure of 21.76 PSI, making it suitable for select Ford truck and SUV fuel delivery systems. It is commonly referenced for Ford F-150, Ford F-250, Ford F-350, Ford Bronco, Ford Explorer, and Mercury Mountaineer applications listed in the fitment data.\u003c\/p\u003e\u003cp\u003eThis part number, F1060A, is supplied as a pump and kit package with the strainer interface and seal needed for installation. It cross-references Bosch 67000 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load\u003c\/li\u003e\n\u003cli\u003eLoss of pump output in aging in-tank assemblies\u003c\/li\u003e\n\u003cli\u003eService replacement for worn pump and strainer components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1997 Ford F-250 HD, rear.\u003c\/li\u003e\n\u003cli\u003eFits 1990-1997 Ford F-350, rear plastic tank; includes fuel pump, fuel reservoir, fuel strainer, and tank seal; with 19 gallon tank.\u003c\/li\u003e\n\u003cli\u003eFits 1997 Mercury Mountaineer; includes fuel pump, fuel reservoir, fuel strainer, and tank seal; to 7\/29\/96.\u003c\/li\u003e\n\u003cli\u003eFits 1990-1996 Ford Bronco; includes fuel pump, fuel reservoir, fuel strainer, and tank seal.\u003c\/li\u003e\n\u003cli\u003eFits 1992-1996 Ford E-150 Econoline, 1992-1996 Ford E-150 Econoline Club Wagon, 1992-1996 Ford E-250 Econoline, 1992-1996 Ford E-350 Econoline, and 1992-1996 Ford E-350 Econoline Club Wagon; original Ford module must remain in the tank and plastic module height is approximately 6 inches.\u003c\/li\u003e\n\u003cli\u003eFits 1995-1996 Ford Explorer; single-tank applications only.\u003c\/li\u003e\n\u003cli\u003eFits 1990-1996 Ford F-150 and 1990-1996 Ford F-250, center tank or rear plastic tank with 19 gallon tank as listed in the fitment notes.\u003c\/li\u003e\n\u003cli\u003eVerify tank style, module height, and application notes before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests pumps throughout the manufacturing process to help maintain consistent product quality. The F1060A is backed by a Limited Lifetime Warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784664245,"sku":"FKDT-F1060A","price":61.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1060A_Fro.jpg?v=1774704975"},{"product_id":"autobest-f1072-electric-fuel-pump","title":"Autobest F1072 Electric Fuel Pump","description":"\u003ch2\u003eElectric Fuel Pump for Ford Mustang Applications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1072 is an in-tank electric fuel pump built for Ford Mustang and Mercury Capri applications that require stable fuel delivery and OE-style fitment. It uses a turbine pump design, 12V operation, and a male 2-pin connector layout for straightforward replacement in supported vehicles.\u003c\/p\u003e\u003cp\u003eAutobest builds this pump with top-grade components and tests it throughout manufacturing. It is rated for performance use, offers strong ethanol tolerance for modern fuel systems, and is supplied with the accessories needed for a complete installation, excluding the strainer.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAutobest F1072 electric fuel pump for in-tank applications\u003c\/li\u003e\n\u003cli\u003eTurbine-style pump design with 12V electrical operation\u003c\/li\u003e\n\u003cli\u003eAverage current draw: 6A\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 27.74 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 79.77 to 101.53 PSI\u003c\/li\u003e\n\u003cli\u003eMale connector with 2 terminals and pin-style connector shape\u003c\/li\u003e\n\u003cli\u003eMale tube outlet with 1 barb outlet type\u003c\/li\u003e\n\u003cli\u003eFilter inlet design with external strainer arrangement\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for today’s fuel systems\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1072 is an electric fuel pump for Ford Mustang and Mercury Capri fuel system service where an in-tank turbine pump is specified. It is engineered for steady fuel delivery, with a flow rating of 27.74 GPH and a pressure range that supports performance-oriented applications. The compact pump body measures 5.039 inches long, 1.445 inches wide, and 1.445 inches high, making it suitable for the listed OE-style installations.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex E2061 and Carter P74119 for the same application. It is also listed among replacement options for 1985-1997 Ford Mustang and 1985-1986 Mercury Capri fuel pump service, including 1996-1997 Ford Mustang, 1994-1997 Ford Mustang, and 1986-1993 Ford Mustang configurations shown in the fitment data.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load\u003c\/li\u003e\n\u003cli\u003eLoss of power from a failing in-tank pump\u003c\/li\u003e\n\u003cli\u003eDriveability issues tied to worn pump internals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible With 1996-1997 Ford Mustang, N\/A, w\/Spade Type Electrical Connector; Includes Tank Seal; Strainer required to validate the warranty: F212S\u003c\/li\u003e\n\u003cli\u003eCompatible With 1994-1997 Ford Mustang, N\/A, w\/brass pump outlet tube; Includes Tank Seal; Strainer required to validate the warranty: F212S\u003c\/li\u003e\n\u003cli\u003eCompatible With 1995 Ford Mustang, N\/A, w\/Spade Type Electrical Connectors; Includes Tank Seal; Strainer required to validate the warranty: F212S\u003c\/li\u003e\n\u003cli\u003eCompatible With 1986-1993 Ford Mustang, N\/A, Includes tank seal, strainer required to validate warranty: F212S\u003c\/li\u003e\n\u003cli\u003eCompatible With 1987-1992 Ford Mustang, N\/A, Standard Replacement Pump; Includes Tank Seal; Strainer required to validate the warranty: F212S\u003c\/li\u003e\n\u003cli\u003eCompatible With 1986 Mercury Capri, N\/A, Includes tank seal, strainer required to validate warranty: F212S\u003c\/li\u003e\n\u003cli\u003eCompatible With 1985 Ford Mustang, N\/A, From 11\/84; Includes Tank Seal; Strainer required to validate the warranty: F212S\u003c\/li\u003e\n\u003cli\u003eCompatible With 1985 Mercury Capri, N\/A, From 11\/84; Includes Tank Seal; Strainer required to validate the warranty: F212S\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eVerify connector style, outlet style, and tank configuration before installation. The pump uses a male connector and pin-style terminal layout, and the fitment notes call for the specified strainer to validate warranty coverage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests these fuel pumps throughout the manufacturing process to maintain consistent build quality. The F1072 includes a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784697013,"sku":"FKDT-F1072","price":41.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1072_Fro.jpg?v=1774704976"},{"product_id":"autobest-f1075a-fuel-pump-and-strainer-set","title":"Autobest F1075A Fuel Pump and Strainer Set","description":"\u003ch2\u003eFuel Pump and Strainer Set for Ford Trucks\u003c\/h2\u003e\u003cp\u003eThe Autobest F1075A fuel pump and strainer set is built for in-tank fuel delivery on select Ford F-150, F-250, F-250 HD, and F-350 applications. It includes the components needed for a complete installation and is engineered with ethanol-tolerant materials for modern fuel systems.\u003c\/p\u003e\u003cp\u003eAutobest’s Fuel Pump and Strainer Set line focuses on quality materials, tested performance, and direct-fit service parts for fuel system repair. The F1075A is a performance-grade, 12V turbine pump with an internal strainer and a sealed in-tank design.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAutobest part number F1075A\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine fuel pump design\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 135 GPH\u003c\/li\u003e\n\u003cli\u003eAverage current draw: 7A\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 7.25 to 21.76 PSI\u003c\/li\u003e\n\u003cli\u003e12V negative-ground electrical system\u003c\/li\u003e\n\u003cli\u003eInternal strainer included\u003c\/li\u003e\n\u003cli\u003eGasket\/seal included with NBR material\u003c\/li\u003e\n\u003cli\u003eHousing material: POM\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for fuel system use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1075A is a fuel pump and strainer set for rear-tank Ford truck applications that require an in-tank replacement. It is listed for 1990-1997 Ford F-150, 1990-1997 Ford F-250, 1990-1997 Ford F-350, and 1997 Ford F-250 HD, with fitment notes calling out rear steel tank configurations, fuel reservoir, fuel strainer, and tank seal requirements on the applicable models. This part cross-references Airtex E2064MN and Bosch 67003 for the same application.\u003c\/p\u003e\u003cp\u003eWith a turbine-style pump, metallic conduit outlet, and internal strainer, the F1075A is intended to restore fuel delivery performance in vehicles that rely on an in-tank pump assembly. The included seal and complete-kit packaging support a cleaner replacement process for Ford F-150, Ford F-250, and Ford F-350 fuel system service.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel delivery\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from low fuel pressure\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load\u003c\/li\u003e\n\u003cli\u003eIntermittent stalling related to pump wear\u003c\/li\u003e\n\u003cli\u003ePoor drivability from a restricted or failing in-tank pump assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eInstall in the tank only. Verify the vehicle uses the listed rear tank configuration before ordering, especially on 1990-1997 Ford F-150, F-250, and F-350 models. The pump is supplied without a wire harness, fuel filter, fuel sending unit, fuel tank pressure sensor, or regulator. Confirm electrical polarity, outlet routing, and seal placement during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-grade components and tests pumps throughout the manufacturing process to help maintain consistent quality. The F1075A is backed by a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784729781,"sku":"FKDT-F1075A","price":61.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1075A_Fro.jpg?v=1774704976"},{"product_id":"autobest-f1076-electric-fuel-pump","title":"Autobest F1076 Electric Fuel Pump","description":"\u003ch2\u003eElectric Fuel Pump for Ford and Mercury Applications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1076 electric fuel pump is an in-tank turbine-style replacement built for Ford Escort, Ford Tempo, Mercury Tracer, and Mercury Topaz applications. It is engineered for 12V systems, steady fuel delivery, and ethanol-blended fuels used in modern service conditions.\u003c\/p\u003e\u003cp\u003eAutobest Electric Fuel Pump line components are built with top-grade materials and tested throughout manufacturing for consistent performance. The F1076 is a direct-fit style option for select in-tank and tank-mounted applications where reliable pressure and flow are required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eElectric in-tank fuel pump for select Ford and Mercury vehicles\u003c\/li\u003e\n\u003cli\u003eTurbine pump design for consistent fuel delivery\u003c\/li\u003e\n\u003cli\u003e12V operation with 6 amp average current draw\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 110 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range of 79.8 to 123.25 PSI\u003c\/li\u003e\n\u003cli\u003eMale connector and male terminal configuration\u003c\/li\u003e\n\u003cli\u003eBuilt for improved ethanol tolerance in today’s fuel systems\u003c\/li\u003e\n\u003cli\u003eIncludes accessories needed for a complete installation; strainer sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1076 electric fuel pump is designed for fuel system service on 1988-1997 Ford Escort, 1988-1993 Ford Tempo, 1991-1993 Mercury Tracer, and 1988-1994 Mercury Topaz applications. It supports in-tank installation where stable pressure, dependable flow, and modern fuel compatibility matter. This part number, F1076, is a practical replacement choice for drivers and technicians servicing older Ford and Mercury fuel systems.\u003c\/p\u003e\u003cp\u003eThis part cross-references Carter P90041 and Delphi FE0109 for the same application. It is also listed among interchange references used across related OE-style fuel pump applications.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel delivery\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent pump pressure\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load\u003c\/li\u003e\n\u003cli\u003ePoor drivability related to aging in-tank pump components\u003c\/li\u003e\n\u003cli\u003eFuel system service needs on Ford Escort, Ford Tempo, Mercury Tracer, and Mercury Topaz models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible With 1994-1997 Ford Escort, in-tank service notes include tank seal and a required strainer for warranty validation: F241S.\u003c\/li\u003e\n\u003cli\u003eCompatible With 1994-1997 Mercury Tracer, in-tank service notes include tank seal and a required strainer for warranty validation: F241S.\u003c\/li\u003e\n\u003cli\u003eCompatible With 1994 Ford Tempo, with brass pump outlet tube; tank seal included in fitment notes; strainer required for warranty validation: F242S; to 6\/94.\u003c\/li\u003e\n\u003cli\u003eCompatible With 1994 Mercury Topaz, with brass pump outlet tube; tank seal included in fitment notes; strainer required for warranty validation: F242S; to 6\/94.\u003c\/li\u003e\n\u003cli\u003eCompatible With 1991-1993 Ford Escort, in-tank service notes include hose, clamps, isolator, and tank seal.\u003c\/li\u003e\n\u003cli\u003eCompatible With 1988-1993 Ford Tempo, with brass pump outlet tube; tank seal included in fitment notes; strainer required for warranty validation: F242S.\u003c\/li\u003e\n\u003cli\u003eCompatible With 1988-1993 Mercury Topaz, with brass pump outlet tube; tank seal included in fitment notes; strainer required for warranty validation: F242S.\u003c\/li\u003e\n\u003cli\u003eCompatible With 1991-1993 Mercury Tracer, in-tank service notes include hose, clamps, isolator, and tank seal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests pumps throughout the manufacturing process to support consistent build quality. The F1076 is backed by a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784795317,"sku":"FKDT-F1076","price":35.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1076_Fro_21e7ed18-3b1a-447f-8547-eab05ac6e643.jpg?v=1774704976"},{"product_id":"autobest-f1078-electric-fuel-pump","title":"Autobest F1078 Electric Fuel Pump","description":"\u003ch2\u003eElectric Fuel Pump for Nissan Quest and Mercury Villager\u003c\/h2\u003e\u003cp\u003eAutobest F1078 is an in-tank electric fuel pump built for 12V fuel systems that need steady delivery and high-pressure performance. It is a fitment-based replacement for select Nissan Quest and Mercury Villager applications, with ethanol-tolerant materials and a turbine pump design for modern fuel demands.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIn-tank electric fuel pump with turbine-style operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 110 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 79.8 to 123.25 PSI\u003c\/li\u003e\n\u003cli\u003e12V design with 6A average current draw\u003c\/li\u003e\n\u003cli\u003eMale connector with 2-pin PIN connector layout\u003c\/li\u003e\n\u003cli\u003eMale tube \/ 1 barb outlet and filter-style inlet\u003c\/li\u003e\n\u003cli\u003eWire harness included; strainer sold separately\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested during manufacturing\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Application and Fitment\u003c\/h2\u003e\u003cp\u003eAutobest F1078 is an electric fuel pump for select 1993-1998 Nissan Quest and 1993-1998 Mercury Villager models, with 1998 Mercury Villager coverage noted for builds to 3\/4\/98. It is also cross-referenced to Airtex E2067 and Bosch 69127 for the same application. This part number, F1078, is suited for drivers replacing a worn in-tank pump in Nissan Quest and Mercury Villager fuel systems where consistent pressure and ethanol resistance matter.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Pump Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by low fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stalling under load\u003c\/li\u003e\n\u003cli\u003eFuel delivery loss from a failing in-tank pump\u003c\/li\u003e\n\u003cli\u003ePressure drop that affects acceleration and drivability\u003c\/li\u003e\n\u003cli\u003ePump noise or intermittent operation from worn internal components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm vehicle year and build date before ordering, especially for 1998 Mercury Villager applications. The strainer is sold separately, and Autobest notes that strainer F212S is required to validate the warranty on listed applications. The pump includes a wire harness, but no gasket or seal is included. Verify connector style, inlet, outlet, and pressure requirements against the original unit before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that this fuel pump uses top-quality materials and is tested throughout the manufacturing process for consistent build quality. The pump is backed by a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784828085,"sku":"FKDT-F1078","price":33.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1078_Fro.jpg?v=1774704977"},{"product_id":"autobest-f1087a-fuel-pump-and-sender-assembly","title":"Autobest F1087A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ford and Dodge\u003c\/h2\u003e\u003cp\u003eThe Autobest F1087A fuel pump and sender assembly is built for direct replacement service in select Ford Taurus, Mercury Sable, and Dodge truck applications. It combines fuel delivery and fuel level sending functions in one in-tank unit, with ethanol-tolerant materials and a complete installation-focused package.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine-style fuel pump with integrated fuel sending unit\u003c\/li\u003e\n\u003cli\u003e36 GPH average flow rating and 80-100 PSI operating pressure range\u003c\/li\u003e\n\u003cli\u003e12V electrical system with 5 amp average current draw\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and single male elliptic connector\u003c\/li\u003e\n\u003cli\u003eExternal strainer and included NBR gasket\/seal\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested throughout manufacturing\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Autobest\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAutobest Fuel Pump and Sender Assembly F1087A is a performance-grade replacement for vehicles that need dependable fuel delivery and accurate fuel level reporting. The assembly includes the pump, sender, float, strainer, and tank seal for a complete service solution. It is engineered for superior ethanol tolerance, making it a practical choice for modern fuel blends and older vehicles that still need reliable in-tank fuel system service. This part cross-references Airtex E2076S and Delphi HP10151 for the same application.\u003c\/p\u003e\u003cp\u003eCompatible With select 1986-1995 Ford Taurus and Mercury Sable models with a 16-gallon tank, as well as 1974-1983 Dodge W150, W300, W350, B100, B200, B300, D100, D150, D200, D300, Ramcharger, W100, and W200 applications listed in the fitment data. The F1087A is a direct-fit fuel pump and sender assembly for these vehicle-specific in-tank systems.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings from a worn sender\u003c\/li\u003e\n\u003cli\u003eFuel starvation from a failing in-tank pump\u003c\/li\u003e\n\u003cli\u003eIntermittent drivability issues related to inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eService leaks at the tank seal or sender interface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify tank size before ordering, especially on Ford Taurus and Mercury Sable applications that require the 16-gallon tank configuration. Confirm connector style, outlet type, and sender resistance range during diagnosis to match the original system. Because this assembly is designed for in-tank use, inspect the tank, wiring, and fuel lines before installation to help ensure proper operation after replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests its fuel pumps at multiple stages of production to help maintain consistent performance. The F1087A is backed by a limited lifetime warranty and is supplied as a complete fuel pump and sender assembly for service-ready installation.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784926389,"sku":"FKDT-F1087A","price":85.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1087A_Fro.jpg?v=1774704977"},{"product_id":"autobest-f1109a-fuel-pump-module-assembly","title":"Autobest F1109A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for 1998 Taurus and Sable\u003c\/h2\u003e\u003cp\u003eThe Autobest F1109A fuel pump module assembly is built for direct replacement service in select 1998 Ford Taurus and Mercury Sable applications. It combines the pump, sending unit, strainer, gasket, and module components needed for a complete in-tank fuel delivery repair.\u003c\/p\u003e\u003cp\u003eWith a turbine-style pump, 12V operation, and ethanol-tolerant materials, this module is suited for modern fuel systems that need stable pressure and reliable fuel level reporting. The F1109A is a practical choice for restoring fuel delivery on the 1998 Ford Taurus and 1998 Mercury Sable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFuel pump module assembly for in-tank installation\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, strainer, and gasket\/seal\u003c\/li\u003e\n\u003cli\u003eTurbine pump design with 80-100 PSI operating range\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 29 GPH and 6A average current draw\u003c\/li\u003e\n\u003cli\u003e12V electrical system with 3\/8 in. quick-connect outlet\u003c\/li\u003e\n\u003cli\u003eBuilt with POM housing and NBR seal material\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for today’s fuel blends\u003c\/li\u003e\n\u003cli\u003eAutobest F1109A cross-references Airtex E2198M and Delphi FG0841\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1109A is a fuel pump module assembly engineered for select 1998 Ford Taurus and Mercury Sable vehicles. It is an in-tank, performance-grade replacement that includes the pump and module components needed to restore fuel delivery and fuel level signal function. The assembly uses a turbine pump, male\/female connectors, and a 10-terminal PIN layout for the specified application.\u003c\/p\u003e\u003cp\u003eThis part is built with top-grade components and tested throughout manufacturing to support consistent output and fit. The module is designed around a 3\/8 in. quick-connect outlet, external and internal strainer arrangement, and a fuel sending unit with 15 ohms empty and 160 ohms full resistance values. Part number F1109A is also listed with interchange references including Airtex E2198M and Delphi FG0841 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel delivery\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent pump output\u003c\/li\u003e\n\u003cli\u003eFuel gauge readings that no longer track tank level correctly\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure conditions in the tank-mounted system\u003c\/li\u003e\n\u003cli\u003eNoise or wear associated with an aging fuel pump module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 1998 Ford Taurus, N\/A. Fits 1998 Mercury Sable, N\/A. Confirm connector style, outlet type, and tank configuration before installation. Replace the tank seal during service and inspect the fuel lines, electrical terminals, and strainer area for contamination or wear. Because this is an in-tank module, access is typically through the fuel tank service opening or by lowering the tank, depending on vehicle configuration.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that this module uses quality materials and is tested at multiple stages of production. The F1109A includes a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385785024693,"sku":"FKDT-F1109A","price":100.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1109A_Fro.jpg?v=1774704978"},{"product_id":"autobest-f1112a-fuel-pump-and-sender-assembly","title":"Autobest F1112A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ford Tempo and Mercury Topaz\u003c\/h2\u003e\u003cp\u003eAutobest F1112A is a fuel pump and sender assembly built for direct replacement service in select Ford and Mercury applications. It combines the pump, sending unit, float, fuel strainer, and tank seal in one in-tank assembly for 1988-1993 Ford Tempo and Mercury Topaz models, plus 1994 vehicles built through 6\/94.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine pump with a 12V electrical design\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 38 GPH and average current draw of 7A\u003c\/li\u003e\n\u003cli\u003eOperating pressure range of 80-100 PSI\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level reporting\u003c\/li\u003e\n\u003cli\u003eStrainer and gasket\/seal included with the assembly\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and single elliptic male connector\u003c\/li\u003e\n\u003cli\u003ePerformance-grade construction with ethanol-tolerant materials\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty from Autobest\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1112A fuel pump and sender assembly is engineered for Ford Tempo and Mercury Topaz fuel system service where a complete in-tank replacement is needed. It uses top-grade components and a turbine-style pump design to support steady fuel delivery, while the included sender helps restore fuel level readings. This part cross-references Carter P74626H and Delphi HP10152 for the same application. It also matches OE-style applications for 1988-1993 Ford Tempo and 1988-1993 Mercury Topaz, with 1994 Tempo and Topaz coverage through 6\/94.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Help Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak or inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stalling from a failing in-tank pump\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings from a worn sender\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load from a restricted or aging pump assembly\u003c\/li\u003e\n\u003cli\u003eFuel system noise or poor performance from a deteriorated internal component\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 1988-1993 Ford Tempo, N\/A. Fits 1994 Ford Tempo, N\/A, to 6\/94. Fits 1988-1993 Mercury Topaz, N\/A. Fits 1994 Mercury Topaz, N\/A, to 6\/94. Verify tank condition, electrical connector style, outlet connection, and sender resistance before installation. The assembly is supplied with a strainer and tank seal; mounting hardware and wire harness are not included.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that each pump is tested throughout manufacturing and built from top-quality materials for consistent performance. The F1112A is backed by a Limited Lifetime Warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788235957,"sku":"FKDT-F1112A","price":93.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1112A_Fro.jpg?v=1774704979"},{"product_id":"autobest-f1114a-fuel-pump-and-sender-assembly","title":"Autobest F1114A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ford Trucks\u003c\/h2\u003e\u003cp\u003eAutobest F1114A is a fuel pump and sender assembly built for select 1987-1989 Ford F-150, F-250, and F-350 center tank applications. It combines fuel delivery and fuel level sending functions in one in-tank unit, with ethanol-tolerant materials and a complete installation package for the listed applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine pump design with 12V operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 46 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 2 to 10 PSI\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for level signal output\u003c\/li\u003e\n\u003cli\u003eStrainer and tank seal included\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and single male connector\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested throughout manufacturing\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly, part number F1114A, is a performance-grade replacement for center tank fuel systems in 1987-1989 Ford F-150, Ford F-250, and Ford F-350 trucks. It is designed as an in-tank turbine pump with a fuel sending unit, helping restore both fuel delivery and fuel level reporting in one service part. The assembly uses quality materials selected for fuel-system durability and ethanol compatibility, making it a practical choice for older Ford truck fuel systems that need dependable operation.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex E2103S and Carter P74518S for the same application. Autobest F1114A is listed for 1987-1989 Ford F-150, 1987-1989 Ford F-250, and 1987-1989 Ford F-350 center tank configurations, including notes for 19 gallon tank applications where specified.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Resolve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak or inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eErratic or inaccurate fuel gauge readings from a worn sender\u003c\/li\u003e\n\u003cli\u003eFuel starvation from a failing in-tank pump\u003c\/li\u003e\n\u003cli\u003eDriveability issues related to low fuel pressure\u003c\/li\u003e\n\u003cli\u003eService problems caused by a deteriorated tank seal or strainer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify tank configuration, connector style, outlet size, and sender resistance before installation. This assembly uses a male connector with four terminals, a 3\/8 in. quick-connect outlet, and an external strainer. The package includes the pump and sender assembly, fuel strainer, and gasket or seal; mounting hardware and wire harness are not included. For Ford F-150, Ford F-250, and Ford F-350 center tank applications, confirm whether the vehicle uses a single in-tank pump or a dual-pump arrangement before ordering.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that each fuel pump is built from top-grade components and tested at multiple stages during manufacturing. The F1114A is backed by a Limited Lifetime Warranty and is engineered with ethanol-tolerant materials for fuel-system durability.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788268725,"sku":"FKDT-F1114A","price":91.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1114A_Fro.jpg?v=1774704979"},{"product_id":"autobest-f1117a-fuel-pump-and-sender-assembly","title":"Autobest F1117A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ranger and Mazda B-Series\u003c\/h2\u003e\u003cp\u003eAutobest F1117A is a fuel pump and sender assembly built for direct replacement service in select Ford Ranger and Mazda B-Series trucks. It combines the pump, sending unit, float, fuel strainer, and tank seal in one assembly to support accurate fuel delivery and fuel level reporting.\u003c\/p\u003e\u003cp\u003eWith a turbine-style pump, 12V operation, and ethanol-tolerant materials, this assembly is built for modern fuel systems that need stable pressure and dependable sender performance. It is a practical choice for Ford Ranger and Mazda B2300, B3000, and B4000 applications that require a complete in-tank fuel pump and sender replacement.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAutobest F1117A fuel pump and sender assembly\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design for fuel delivery service\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 32 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 80 to 100 PSI\u003c\/li\u003e\n\u003cli\u003e12V electrical system with 6.5A average current draw\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, strainer, and gasket\/seal\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and single male connector\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for today’s fuel blends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1117A is engineered as a complete fuel pump and sender assembly for select 1990-1997 Ford Ranger and 1994-1997 Mazda B4000, B2300, and B3000 models. The assembly is designed for in-tank installation and uses a turbine pump layout to support consistent fuel supply and sender operation. The fuel level sender is included, making this a direct solution when both fuel delivery and gauge accuracy need attention. This part cross-references Airtex E2106S and Delphi HP10144 for the same application.\u003c\/p\u003e\u003cp\u003eThe assembly uses top-grade components and is tested throughout manufacturing to help maintain quality control. It features a male elliptic connector, 4-pin male terminal layout, external strainer, and NBR seal material. Part number F1117A is a strong match for drivers searching for a Ford Ranger fuel pump and sender assembly or a Mazda B-Series in-tank fuel pump replacement.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings from a worn sender\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load from a failing in-tank pump\u003c\/li\u003e\n\u003cli\u003eFuel system leaks at the tank seal area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConfirm vehicle fitment by year and model before ordering.\u003c\/li\u003e\n\u003cli\u003eReplace the tank seal during installation to help maintain a proper seal.\u003c\/li\u003e\n\u003cli\u003eInspect the fuel tank and lines for contamination before installing the new assembly.\u003c\/li\u003e\n\u003cli\u003eVerify connector style, outlet type, and sender resistance range during comparison with the original unit.\u003c\/li\u003e\n\u003cli\u003eUse clean fuel system practices to reduce the chance of premature pump wear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that this assembly uses top-quality materials and is tested during manufacturing to support consistent performance. F1117A is backed by a limited lifetime warranty and is supplied for service in fuel systems that require ethanol tolerance and dependable sender operation.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788301493,"sku":"FKDT-F1117A","price":89.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1117A_Fro.jpg?v=1774704979"},{"product_id":"autobest-f1122-electric-fuel-pump","title":"Autobest F1122 Electric Fuel Pump","description":"\u003ch2\u003eAutobest F1122 Electric Fuel Pump\u003c\/h2\u003e\u003cp\u003eThe Autobest F1122 is an in-tank electric fuel pump built for performance-focused fuel delivery in select Mazda, Ford, Geo, GMC, Chevrolet, and Suzuki applications. It uses a turbine pump design, 12V operation, and a 120 GPH average flow rating to support consistent fuel supply in older import and compact truck platforms.\u003c\/p\u003e\u003cp\u003eAutobest Electric Fuel Pump products are built with top-grade components and tested throughout manufacturing for consistent output and fit. This F1122 application also features strong ethanol tolerance for modern fuel blends, making it a practical replacement for aging fuel systems that need stable pressure and dependable operation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank electric fuel pump for select OE-style applications\u003c\/li\u003e\n\u003cli\u003e12V turbine pump design with male wire connectors\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 120 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range of 80 to 123 PSI\u003c\/li\u003e\n\u003cli\u003eAverage current draw of 5 amps\u003c\/li\u003e\n\u003cli\u003eIncludes wire harness for installation\u003c\/li\u003e\n\u003cli\u003eFilter inlet with one male tube \/ 1 barb outlet\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for today’s fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1122 is an electric fuel pump for in-tank use, engineered for direct replacement in vehicles such as the Mazda Miata, Ford Aspire, Geo Tracker, Suzuki Samurai, Suzuki Sidekick, Chevrolet Tracker, and GMC Tracker. It is also cross-referenced to Carter P90029 and Delphi FE0415 for the same application. The compact pump body measures 5.04 inches long by 1.44 inches wide and 1.44 inches high, with a filter-style inlet and a single outlet for fuel system integration.\u003c\/p\u003e\u003cp\u003eThis part number, F1122, is suited for drivers and technicians replacing a worn fuel pump in a Mazda Miata fuel pump application, a Ford Aspire electric fuel pump service, or a Geo Tracker in-tank fuel pump repair. The design focuses on stable fuel delivery, tested component quality, and compatibility with ethanol-blended fuels commonly found in current fuel systems.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load or during acceleration\u003c\/li\u003e\n\u003cli\u003ePoor idle quality related to pump wear\u003c\/li\u003e\n\u003cli\u003eFailure from aging in-tank pump components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm vehicle fitment by year, make, model, and fuel system configuration before installation. This pump is listed for in-tank applications only, and some vehicles require a specific strainer to validate the warranty, including Mazda Miata, Ford Aspire, Geo Tracker, Suzuki Samurai, Suzuki Sidekick, and GMC Tracker applications. The strainer is sold separately. Use the included wire harness and verify connector orientation, inlet style, and outlet connection before final assembly.\u003c\/p\u003e\u003cp\u003eFits 1999-2005 Mazda Miata, N\/A; 1994-1997 Ford Aspire, N\/A; 1996 Geo Tracker, In-Tank; 1989-1995 Geo Tracker, N\/A; 1990-1995 Suzuki Samurai, N\/A; 1995 Suzuki Sidekick, N\/A; 1991-1995 Suzuki Sidekick, N\/A; 1989-1991 Chevrolet Tracker, In-Tank; 1989-1991 GMC Tracker, N\/A.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests fuel pumps throughout the manufacturing process to help maintain consistent performance. The F1122 is backed by a limited lifetime warranty, and the manufacturer notes a 12-month unlimited mileage warranty on the product line description. For warranty validation on listed applications, use the specified strainer where required.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788498101,"sku":"FKDT-F1122","price":35.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1122_Fro.jpg?v=1774704980"},{"product_id":"autobest-f1155a-fuel-pump-and-sender-assembly","title":"Autobest F1155A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ford Explorer and Mazda Navajo\u003c\/h2\u003e\u003cp\u003eAutobest F1155A is a fuel pump and sender assembly built for 1991-1994 Ford Explorer and 1991-1994 Mazda Navajo applications. It combines the pump, sending unit, float, fuel strainer, and tank seal in one in-tank service part for a direct replacement approach.\u003c\/p\u003e\u003cp\u003eWith a turbine-style pump, 12V operation, and ethanol-tolerant materials, this assembly is suited for modern fuel blends and consistent fuel delivery. The Autobest fuel pump and sender assembly line focuses on complete replacement components for service work on Ford Explorer and Mazda Navajo fuel systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1991-1994 Ford Explorer and 1991-1994 Mazda Navajo\u003c\/li\u003e\n\u003cli\u003eAutobest part number F1155A\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 37 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 80-100 PSI\u003c\/li\u003e\n\u003cli\u003e12V electrical system\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included\u003c\/li\u003e\n\u003cli\u003eStrainer and NBR tank seal included\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet\u003c\/li\u003e\n\u003cli\u003eMale round connector with 4-pin terminal layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1155A is a fuel pump and sender assembly for Ford Explorer and Mazda Navajo vehicles that require an in-tank replacement with integrated fuel level sending capability. The assembly uses a turbine pump design and includes the sender, float, fuel strainer, and tank seal to support a complete fuel system service. It is built with top-grade components and tested throughout manufacturing for consistent quality control. This part cross-references Airtex E2144S for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel delivery\u003c\/li\u003e\n\u003cli\u003eErratic or inaccurate fuel level readings\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load or at higher demand\u003c\/li\u003e\n\u003cli\u003eNoisy or failing in-tank pump operation\u003c\/li\u003e\n\u003cli\u003eFuel system service needs on aging Explorer or Navajo assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify connector style, outlet size, and sender resistance before installation. This assembly uses a male round connector, a 3\/8 in. quick-connect outlet, and sender resistance values of 13 ohms empty and 162 ohms full. Because it is an in-tank unit, inspect the tank, wiring, and fuel lines during service and replace any worn sealing surfaces before reassembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses quality materials and tests pumps during manufacturing to help maintain consistent performance. F1155A is backed by a limited lifetime warranty and is supplied for available-to-order service replacement use.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788760245,"sku":"FKDT-F1155A","price":94.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1155A_Fro.jpg?v=1774704980"},{"product_id":"autobest-f1164a-fuel-pump-module-assembly","title":"Autobest F1164A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for 1996 Ford Taurus\u003c\/h2\u003e\u003cp\u003eAutobest F1164A is a fuel pump module assembly built for direct replacement service on select 1996 Ford Taurus and Mercury Sable applications. It includes the pump and module components needed for a complete installation, with ethanol-tolerant materials for modern fuel blends and a turbine-style pump design for steady fuel delivery.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel pump module assembly for in-tank mounting\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 45 GPH\u003c\/li\u003e\n\u003cli\u003eOperating range: 80 to 100 PSI\u003c\/li\u003e\n\u003cli\u003e12V electrical system with 9A average current draw\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for fuel level signal restoration\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet\u003c\/li\u003e\n\u003cli\u003eStrainer included; gasket\/seal included\u003c\/li\u003e\n\u003cli\u003ePerformance-grade construction with top-grade components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication Details\u003c\/h2\u003e\u003cp\u003eFits 1996 Ford Taurus, N\/A. Fits 1996 Mercury Sable, N\/A. This part cross-references Bosch (e.g., 67079) for the same application. The Autobest F1164A fuel pump module assembly is also listed under part number F1164A for buyers comparing OE-style replacement options.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel delivery\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent pump pressure\u003c\/li\u003e\n\u003cli\u003eFuel gauge readings that no longer track tank level correctly\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure conditions affecting drivability\u003c\/li\u003e\n\u003cli\u003eNoise or wear associated with an aging in-tank pump module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify connector style, outlet size, and tank opening details before installation. This module uses a male\/female connector layout with two connectors and a 10-terminal PIN configuration. The package includes the pump and module assembly, along with the fuel sending unit, strainer, and gasket\/seal; mounting hardware and wire harness are not included. Confirm vehicle-specific fitment for 1996 Ford Taurus and 1996 Mercury Sable before service.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest builds this fuel pump module with top-grade components and tests pumps throughout the manufacturing process. F1164A is backed by a limited lifetime warranty, and the manufacturer also notes superior ethanol tolerance for today’s fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788793013,"sku":"FKDT-F1164A","price":130.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1164A_Fro.jpg?v=1774704981"},{"product_id":"autobest-f1193-electric-fuel-pump","title":"Autobest F1193 Electric Fuel Pump","description":"\u003ch2\u003eAutobest F1193 Electric Fuel Pump\u003c\/h2\u003e\u003cp\u003eThe Autobest F1193 electric fuel pump is built for select Ford, Lincoln, and Mercury applications that require a 12V external rollervane pump with threaded male inlet and hose outlet connections. It delivers 90 GPH average flow and operates within a 72.5 to 116 PSI pressure range, making it a direct-fit option for fuel delivery service on classic EFI and carbureted-era systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e12V electric fuel pump with external mounting design\u003c\/li\u003e\n\u003cli\u003eRollervane pump type for steady fuel delivery\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 90 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 72.5 to 116 PSI\u003c\/li\u003e\n\u003cli\u003eAverage current draw: 4.5A\u003c\/li\u003e\n\u003cli\u003eFKM gasket\/seal material for fuel-system sealing\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eIncludes accessories needed for a complete installation; strainer sold separately\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAutobest Electric Fuel Pump F1193 is engineered with top-grade components and tested throughout manufacturing for consistent performance. The pump uses a threaded male 3\/4-16 UNF-2A inlet, a single hose-style outlet, and a two-terminal threaded connection. It is an external fuel pump with no regulator, no wire harness, and no strainer included. This part cross-references Airtex E2182 and Delphi FD0013 for the same application. For buyers searching for a Ford LTD Crown Victoria fuel pump, Lincoln Town Car fuel pump, or Mercury Grand Marquis fuel pump, the F1193 provides a focused replacement option for the listed applications.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1987-1991 Ford LTD Crown Victoria, N\/A. Includes Tank Seal; Strainer required to validate the warranty: F303S\u003c\/li\u003e\n\u003cli\u003eFits 1987-1991 Mercury Colony Park, N\/A. Includes Tank Seal; Strainer required to validate the warranty: F303S\u003c\/li\u003e\n\u003cli\u003eFits 1981-1989 Lincoln Town Car, N\/A. Includes Tank Seal; Strainer required to validate the warranty: F303S\u003c\/li\u003e\n\u003cli\u003eFits 1983-1989 Mercury Grand Marquis, N\/A. Includes Tank Seal; Strainer required to validate the warranty: F303S\u003c\/li\u003e\n\u003cli\u003eFits 1983-1986 Ford LTD, N\/A. Includes Tank Seal; Strainer required to validate the warranty: F303S\u003c\/li\u003e\n\u003cli\u003eFits 1981-1983 Lincoln Mark VI, N\/A. Includes Tank Seal; Strainer required to validate the warranty: F303S\u003c\/li\u003e\n\u003cli\u003eFits 1982 Lincoln Continental, In-Line. In-Line Pump; Electric Fuel Pump\u003c\/li\u003e\n\u003cli\u003eFits 1980 Lincoln Continental, N\/A. Includes Tank Seal; Strainer required to validate the warranty: F303S\u003c\/li\u003e\n\u003cli\u003eFits 1980 Lincoln Mark VI, N\/A. Quad 4 Eng.; From 2\/80; Includes Tank Seal; Strainer required to validate the warranty: F303S\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eConfirm the pump style, inlet thread, outlet connection, and mounting location before installation. This unit is specified as an external pump, so it should be matched to the vehicle’s fuel system layout and the listed fitment notes. A strainer is sold separately, and the fitment notes indicate that the warranty requires strainer F303S on applicable vehicles. Verify the tank seal requirement where noted and inspect fuel lines, terminals, and sealing surfaces during service.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests pumps at multiple stages of production to support consistent build quality. The F1193 is backed by a Limited Lifetime Warranty, and the manufacturer notes improved ethanol tolerance for today’s fuel systems. For classic Ford, Lincoln, and Mercury fuel system repair, this part number is a direct replacement choice for the listed applications.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788989621,"sku":"FKDT-F1193","price":60.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1193_Fro.jpg?v=1774704981"},{"product_id":"autobest-f1195a-fuel-pump-module-assembly","title":"Autobest F1195A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Taurus and Mercury Sable\u003c\/h2\u003e\u003cp\u003eAutobest F1195A is a fuel pump module assembly built for 1997 Ford Taurus and 1997 Mercury Sable applications. It includes the components needed for a complete in-tank fuel delivery service, with ethanol-tolerant materials and a turbine-style pump for consistent fuel supply.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank fuel pump module assembly for 12V systems\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 34 GPH with 80-100 PSI operating range\u003c\/li\u003e\n\u003cli\u003eAverage current draw of 7A\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for fuel level signal restoration\u003c\/li\u003e\n\u003cli\u003eQuick-connect 3\/8 in. outlet with 2 connectors and 10 terminals\u003c\/li\u003e\n\u003cli\u003eTop-quality materials with improved ethanol tolerance for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eStrainer and gasket\/seal included; fuel filter and regulator not included\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1195A fuel pump module assembly is a direct-fit in-tank service part for 1997 Ford Taurus and 1997 Mercury Sable models. It is built as a complete module with the pump, sending unit, float, fuel reservoir, fuel strainer, and tank seal, helping restore fuel delivery and fuel level reporting in one repair. The turbine pump design, 34 GPH flow rating, and 80-100 PSI pressure range support stable operation in the vehicle’s fuel system. This part cross-references Bosch 67094 and Delphi FG0839 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Is Used For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring fuel pressure after a weak or failing pump\u003c\/li\u003e\n\u003cli\u003eCorrecting hard-start, no-start, or stalling conditions tied to fuel delivery\u003c\/li\u003e\n\u003cli\u003eRepairing inaccurate or erratic fuel gauge readings through the included sending unit\u003c\/li\u003e\n\u003cli\u003eReplacing a noisy, worn, or intermittent in-tank pump module\u003c\/li\u003e\n\u003cli\u003eAddressing fuel starvation caused by a deteriorated strainer or module assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 1997 Ford Taurus, N\/A. Fits 1997 Mercury Sable, N\/A. Confirm connector style, outlet size, and tank configuration before installation. Replace the tank seal during service and inspect the fuel lines and electrical terminals for wear or corrosion. Because this is an in-tank module, proper sealing and clean tank conditions are important for reliable operation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that only top-grade components are used and that each fuel pump is tested throughout manufacturing. The F1195A is supplied with a limited lifetime warranty for added confidence in long-term service.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789022389,"sku":"FKDT-F1195A","price":89.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1195A_Fro.jpg?v=1774704981"},{"product_id":"autobest-f1201a-fuel-pump-module-assembly","title":"Autobest F1201A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module for Ford Windstar\u003c\/h2\u003e\u003cp\u003eRestore fuel delivery on 2001-2003 Ford Windstar models with the Autobest F1201A fuel pump module assembly. This in-tank module is built for performance applications and includes the pump, sending unit, strainer, and seal components needed for a complete replacement.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank fuel pump module assembly for Ford Windstar applications\u003c\/li\u003e\n\u003cli\u003eTurbine pump design with 34 GPH average flow rating\u003c\/li\u003e\n\u003cli\u003eOperates at 13.5V with 7A average current draw\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for accurate tank level reporting\u003c\/li\u003e\n\u003cli\u003eQuick-connect 3\/8 in. outlet and dual connector configuration\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eTop-grade components with testing throughout manufacturing\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Autobest\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1201A is a fuel pump module assembly engineered for 2001-2003 Ford Windstar service replacement. It uses an in-tank turbine pump with a 80-100 PSI operating range, a 3\/8 in. quick-connect outlet, and a strainer inlet to support consistent fuel delivery. The module also includes the fuel sending unit, gasket or seal, and strainer, helping simplify a full fuel tank service on the Ford Windstar.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex Fuel Pumps E2290M and Bosch 67168 for the same application. The F1201A is built with a POM housing, NBR seal material, and ethanol-tolerant construction for current fuel system demands. It is a direct-fit fuel pump module assembly for 2001, 2002, and 2003 Ford Windstar models.\u003c\/p\u003e\u003ch2\u003eCommon Problems It Can Help Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel gauge inaccuracies from a worn sending unit\u003c\/li\u003e\n\u003cli\u003eLoss of power under load due to pump wear\u003c\/li\u003e\n\u003cli\u003eNo-start conditions related to a failed in-tank pump module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2001-2003 Ford Windstar, N\/A. Verify connector style, outlet size, and tank configuration before installation. Replace the tank seal during service and inspect the fuel strainer area for contamination or debris. Because this is an in-tank module, access is typically through the fuel tank service opening or by lowering the tank, depending on vehicle setup.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that each fuel pump uses top-grade components and is tested at multiple stages during manufacturing. The F1201A is backed by a limited lifetime warranty and is supplied as a performance-grade fuel pump module assembly for dependable replacement service.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789087925,"sku":"FKDT-F1201A","price":105.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1201A_Fro.jpg?v=1774704982"},{"product_id":"autobest-f1202a-fuel-pump-module-assembly","title":"Autobest F1202A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Escape and Tribute\u003c\/h2\u003e\u003cp\u003eAutobest F1202A is a fuel pump module assembly built for 2001-2004 Ford Escape and 2001-2004 Mazda Tribute applications. It combines the pump and module components needed for a complete in-tank fuel delivery service, with ethanol-tolerant materials for modern fuel systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine-style fuel pump module assembly\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 34 GPH with 80-100 PSI operating range\u003c\/li\u003e\n\u003cli\u003e12V electrical system with 6.5A average current draw\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, gasket\/seal, and strainer\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and single round male connector\u003c\/li\u003e\n\u003cli\u003ePerformance-grade construction with POM housing and NBR seal material\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for today’s fuel blends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1202A fuel pump module assembly is engineered for direct replacement service on Ford Escape and Mazda Tribute models from 2001 through 2004. It is an in-tank unit with a turbine pump design, 3\/8 in. outlet, and a single round connector layout for straightforward integration into the vehicle’s fuel system. The module includes the fuel sending unit and strainer, and it is supplied with a gasket\/seal for installation. Autobest uses top-grade components and tests pumps throughout manufacturing to help maintain consistent output and fitment. This part cross-references Airtex E2291M and Bosch 67192 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Fuel System Issues It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation under load from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel gauge inaccuracies related to a failing sending unit\u003c\/li\u003e\n\u003cli\u003eLoss of power from a worn in-tank pump module\u003c\/li\u003e\n\u003cli\u003eFuel delivery problems in ethanol-blended fuel environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify connector style, outlet size, and tank configuration before installation. This module is designed for in-tank use and should be installed with care to avoid contamination inside the fuel tank. Confirm the vehicle’s original fuel system layout matches the listed Ford Escape and Mazda Tribute fitment, including the integrated sending unit and tank seal requirements.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest builds this fuel pump module assembly with top-quality materials and tests components during the manufacturing process. The F1202A is backed by a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789284533,"sku":"FKDT-F1202A","price":101.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1202A_Fro_313f9848-5727-4e16-99ef-87116fa669a8.jpg?v=1774704982"},{"product_id":"autobest-f1204a-fuel-pump-module-assembly","title":"Autobest F1204A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ranger and Mazda B-Series\u003c\/h2\u003e\u003cp\u003eThe Autobest F1204A fuel pump module assembly is built for direct replacement in select Ford Ranger and Mazda B-Series trucks. It combines the pump, sending unit, regulator, strainer, and seal components needed for a complete in-tank fuel system service.\u003c\/p\u003e\u003cp\u003eDesigned for 2001-2003 Ford Ranger, 2001-2003 Mazda B2300, 2001-2003 Mazda B3000, and 2001-2003 Mazda B4000 applications, this module supports consistent fuel delivery with ethanol-tolerant materials and OE-style electrical and fuel connections.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFuel pump module assembly for in-tank installation\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, regulator, strainer, and tank seal\u003c\/li\u003e\n\u003cli\u003eTurbine pump design with 12V operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 31 GPH and average current draw of 6A\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 68.2 PSI and minimum pump pressure of 62.3 PSI\u003c\/li\u003e\n\u003cli\u003eFemale round connector with 1 connector, 4-pin male terminals\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and 0.433 in. inlet size\u003c\/li\u003e\n\u003cli\u003eFKM gasket\/seal material for fuel-system durability\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1204A is a fuel pump module assembly engineered for direct-fit service on Ford Ranger and Mazda B-Series trucks from 2001 through 2003. It is an in-tank turbine-style module with a built-in fuel pressure regulator and fuel sending unit, making it a practical choice when replacing a worn pump assembly in the fuel tank. The module uses a 3\/8 in. quick-connect outlet, a round female connector, and a 4-pin male terminal layout for straightforward electrical and fuel line integration.\u003c\/p\u003e\u003cp\u003eAutobest builds this assembly with top-grade components and tests pumps throughout manufacturing to help maintain consistent output and reliability. The F1204A also uses materials selected for superior ethanol tolerance, which is important for vehicles running today’s fuel blends. This part cross-references Bosch 67177 and Delphi FG0873 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel gauge readings that are inaccurate due to a failing sending unit\u003c\/li\u003e\n\u003cli\u003eLoss of pressure from a worn internal regulator or pump\u003c\/li\u003e\n\u003cli\u003eNoise or drivability issues related to an aging in-tank fuel module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify tank access, connector style, outlet type, and fuel line routing before installation. This module is designed for in-tank use and includes the fuel pump, sending unit, float, fuel pressure regulator, fuel strainer, and tank seal for the listed Ford Ranger and Mazda B-Series applications. Confirm the vehicle’s year and model match the fitment details before service.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses quality materials and manufacturing checks to support consistent product performance. The F1204A fuel pump module assembly is backed by a Limited Lifetime Warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789317301,"sku":"FKDT-F1204A","price":115.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1204A_Fro.jpg?v=1774704982"},{"product_id":"autobest-f1205a-fuel-pump-module-assembly","title":"Autobest F1205A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for 2001 Taurus and Sable\u003c\/h2\u003e\u003cp\u003eThe Autobest F1205A fuel pump module assembly is built for direct replacement service on select 2001 Ford Taurus and Mercury Sable applications. It includes the pump, sending unit, float, fuel reservoir, fuel strainer, and tank seal for a complete in-tank fuel delivery repair.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine-style fuel pump module assembly\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 37 GPH with 8 amp average current draw\u003c\/li\u003e\n\u003cli\u003eOperating pressure range of 80 to 100 PSI\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and regulator\u003c\/li\u003e\n\u003cli\u003eQuick-connect 3\/8 in. outlet with two connectors and 10 terminals\u003c\/li\u003e\n\u003cli\u003eStrainer and gasket\/seal included for installation support\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Autobest\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1205A is a performance-grade fuel pump module assembly engineered for in-tank fuel system service. It uses top-grade components, a turbine pump design, and a POM housing with NBR sealing material to support consistent fuel delivery in ethanol-blended fuel environments. The module is configured with a male\/female connector layout, rectangle and round connector shapes, and a quick-connect outlet for straightforward replacement of the original assembly.\u003c\/p\u003e\u003cp\u003eFits 2001 Ford Taurus and 2001 Mercury Sable, with notes that the assembly includes the fuel pump, sending unit, float, fuel reservoir, fuel strainer, and tank seal. This part cross-references Airtex Fuel Pumps E2294M and Carter P76489M for the same application. The Autobest F1205A is a direct-fit option for drivers searching for a 2001 Taurus fuel pump module assembly or a 2001 Sable in-tank fuel pump replacement.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel gauge readings affected by a worn sending unit\u003c\/li\u003e\n\u003cli\u003eLoss of power under load from restricted pump output\u003c\/li\u003e\n\u003cli\u003eFuel system noise from a failing in-tank pump module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify tank access, connector style, outlet size, and sender resistance before installation. This module is designed for in-tank use and includes the strainer and seal, but it does not include mounting hardware or a wire harness. Clean the tank and inspect the fuel lines before installing the new assembly to help protect the pump and strainer.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that each fuel pump is tested throughout manufacturing to help maintain consistent quality. The F1205A is backed by a limited lifetime warranty and is built with materials selected for ethanol tolerance and long-term fuel system service.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789350069,"sku":"FKDT-F1205A","price":100.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1205A_Fro.jpg?v=1774704983"},{"product_id":"autobest-f1206a-fuel-pump-module-assembly","title":"Autobest F1206A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Ranger\u003c\/h2\u003e\u003cp\u003eThe Autobest F1206A fuel pump module assembly is built for 2001-2003 Ford Ranger applications with the fuel pump, sending unit, float, fuel pressure regulator, fuel strainer, and tank seal included in the fitment notes. It is an in-tank turbine-style module with a 12V electrical design, quick-connect outlet, and ethanol-tolerant materials for modern fuel systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2001-2003 Ford Ranger, N\/A\u003c\/li\u003e\n\u003cli\u003eAutobest F1206A fuel pump module assembly for in-tank installation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 37 GPH with 58-63.8 PSI operating pressure range\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for accurate tank level reporting\u003c\/li\u003e\n\u003cli\u003eRegulator included, with FKM gasket\/seal material for fuel-system durability\u003c\/li\u003e\n\u003cli\u003eFemale round connector with 4 male pin terminals\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and internal strainer design\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested throughout manufacturing\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1206A is a fuel pump module assembly engineered for Ford Ranger fuel system service. This in-tank module uses a turbine pump design, draws an average of 7 amps, and is configured with a single outlet and integrated regulator for stable fuel delivery. The module also includes the sending unit and strainer, helping restore fuel supply and fuel level signal performance in one service part. For shoppers searching for a Ford Ranger fuel pump module assembly, Ford Ranger fuel sending unit replacement, or Autobest F1206A fuel pump module, this part provides the core components needed for the listed application.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex Fuel Pumps E2295M and Carter P74997M for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Symptoms\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting or extended crank time\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eIncorrect or erratic fuel gauge readings\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure under load\u003c\/li\u003e\n\u003cli\u003eFuel pump noise from the tank area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify connector style, outlet type, and tank configuration before installation. Because this is an in-tank module, inspect the tank opening, seal surface, and electrical connector condition during service. Confirm the vehicle uses the listed Ford Ranger application and compare the original module layout to the F1206A before removal.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that only top-grade components are used and that each pump is tested during manufacturing. The F1206A is supplied with a limited lifetime warranty, and the manufacturer also notes improved ethanol tolerance for current fuel formulations.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789382837,"sku":"FKDT-F1206A","price":121.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1206A_Fro.jpg?v=1774704983"},{"product_id":"autobest-f1207a-fuel-pump-and-sender-assembly","title":"Autobest F1207A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Explorer and Mountaineer\u003c\/h2\u003e\u003cp\u003eThe Autobest F1207A fuel pump and sender assembly is a direct replacement for select Ford and Mercury applications that need a complete in-tank fuel delivery solution. It combines the pump, sending unit, regulator, strainer, and seal components needed for a full service replacement on compatible Explorer, Explorer Sport, Explorer Sport Trac, and Mountaineer models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine-style fuel pump with 12V operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 28 GPH for steady fuel delivery\u003c\/li\u003e\n\u003cli\u003eOperating pressure range of 62.4 to 68.2 PSI\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for accurate tank level reporting\u003c\/li\u003e\n\u003cli\u003eRegulator, strainer, and gasket\/seal included\u003c\/li\u003e\n\u003cli\u003eQuick-connect 3\/8 in. outlet with 0.433 in. inlet size\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eMale\/female connectors with 10-pin terminal layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAutobest Fuel Pump and Sender Assembly F1207A is built as a complete in-tank replacement for vehicles that require both fuel delivery and fuel level sensing in one unit. The assembly uses top-grade components and is tested throughout manufacturing to support consistent operation. It is a practical choice for Ford Explorer, Ford Explorer Sport, Ford Explorer Sport Trac, and Mercury Mountaineer service work where the original pump module has failed or fuel level readings have become inaccurate.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex Fuel Pumps E2296S and Carter P74879S for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Assembly Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak or failing fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eIncorrect or erratic fuel gauge readings\u003c\/li\u003e\n\u003cli\u003eFuel pump noise associated with worn internal components\u003c\/li\u003e\n\u003cli\u003eLoss of pressure in the in-tank fuel system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eCompatible With 1999-2001 Ford Explorer, 2001 Ford Explorer Sport, 2001 Ford Explorer Sport Trac, and 1999-2001 Mercury Mountaineer. The Explorer and Mountaineer applications include the fuel pump, sending unit, float, fuel pressure regulator, fuel strainer, and tank seal; the Explorer Sport Trac application is listed with one tube port and the same core components. Verify connector style, outlet type, and tank configuration before installation. No mounting hardware or wire harness is included.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests pumps during the manufacturing process to help maintain product consistency. Part number F1207A is backed by a limited lifetime warranty and is also supplied with a 12-month unlimited mileage warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789448373,"sku":"FKDT-F1207A","price":100.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1207A_Fro.jpg?v=1774704983"},{"product_id":"autobest-f1209a-fuel-pump-and-sender-assembly","title":"Autobest F1209A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender for Ford Expedition\u003c\/h2\u003e\u003cp\u003eAutobest F1209A is an in-tank fuel pump and sender assembly built for 1999-2002 Ford Expedition models with standard suspension. It combines the pump, sending unit, float, fuel strainer, and tank seal in one application-specific assembly for a direct replacement service.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine pump with a 34 GPH average flow rating\u003c\/li\u003e\n\u003cli\u003eOperates on 12V electrical systems with an average current draw of 6.5A\u003c\/li\u003e\n\u003cli\u003eFuel pressure range of 80-100 PSI\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level reporting\u003c\/li\u003e\n\u003cli\u003eStrainer and NBR tank seal included\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and dual connector layout\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Autobest\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1209A fuel pump and sender assembly is a performance-grade replacement for Ford Expedition fuel system service. It is engineered as an in-tank turbine-style unit with a male\/female connector arrangement, 10-pin terminal layout, and external strainer design. The assembly is intended for 1999-2002 Ford Expedition applications with standard suspension and is supplied with the fuel pump, sending unit, float, fuel strainer, and tank seal for a complete fuel tank service.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex Fuel Pumps E2298S and Carter P74875S for the same application. Autobest part number F1209A is also listed among common interchange references for this Ford Expedition fuel pump and sender assembly.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel gauge readings that no longer track tank level correctly\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent pump pressure\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure conditions in the tank-mounted fuel system\u003c\/li\u003e\n\u003cli\u003eFuel system service needs after pump or sender wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm vehicle fitment before installation: Fits 1999-2002 Ford Expedition, N\/A, with standard suspension. Verify the 3\/8 in. quick-connect outlet, connector style, and tank opening details before removing the original unit. Replace the tank seal during service and inspect the fuel tank for contamination before installing the new assembly. This part does not include a fuel filter, fuel tank pressure sensor, mounting hardware, regulator, or wire harness.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that each fuel pump is built from top-grade components and tested throughout manufacturing for consistent quality. The F1209A is backed by a limited lifetime warranty and is specified for ethanol-tolerant fuel system use.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789481141,"sku":"FKDT-F1209A","price":98.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1209A_Fro.jpg?v=1774704985"},{"product_id":"autobest-f1217a-fuel-pump-and-sender-assembly","title":"Autobest F1217A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ford Vans\u003c\/h2\u003e\u003cp\u003eAutobest F1217A is a fuel pump and sender assembly built for select Ford E-Series applications that require an in-tank, center-tank style replacement. It combines fuel delivery and fuel level sending functions in one unit, with ethanol-tolerant materials and a turbine pump design for modern fuel systems.\u003c\/p\u003e\u003cp\u003eCompatible With 1997-2003 Ford E-150 Econoline, 1997-2003 Ford E-150 Econoline Club Wagon, 1997-2003 Ford E-250 Econoline, 1997-2003 Ford E-350 Econoline Club Wagon, and 1999-2003 Ford E-350 Super Duty applications listed below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFuel pump and sender assembly for in-tank installation\u003c\/li\u003e\n\u003cli\u003eTurbine pump design with 12V operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 32 GPH and 80-100 PSI pressure range\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for fuel level reporting\u003c\/li\u003e\n\u003cli\u003eStrainer and tank seal included; gasket material is NBR\u003c\/li\u003e\n\u003cli\u003eMale round connector with 4-pin terminal layout\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for today’s fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Autobest\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly, part number F1217A, is engineered as a complete replacement for select Ford van fuel systems. It is an in-tank unit with one 3\/8 in. quick-connect outlet, a 0.433 in. inlet, and a single male round connector. The assembly draws an average of 6 amps and uses an external strainer to help support clean fuel delivery. Autobest states that each pump is assembled with top-grade components and tested throughout manufacturing for consistent quality.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex E2206S and Carter P74857S for the same application. For buyers searching Ford E-150 Econoline fuel pump and sender assembly, Ford E-250 Econoline fuel pump replacement, or Ford E-350 Super Duty in-tank fuel pump, F1217A is the direct part number to verify against the vehicle’s tank configuration and connector style.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Addresses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eFuel gauge readings that no longer track tank level correctly\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel pump noise or reduced output from a worn in-tank unit\u003c\/li\u003e\n\u003cli\u003eFuel system service needs on Ford E-Series vans with center tank layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify the vehicle’s tank position, tube-port configuration, and connector style before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm the outlet type is a 3\/8 in. quick connect and the electrical connector matches the existing harness.\u003c\/li\u003e\n\u003cli\u003eInspect the tank, lines, and sealing surfaces before installation to help prevent leaks.\u003c\/li\u003e\n\u003cli\u003eReplace the assembly only after confirming the sender resistance range matches the application.\u003c\/li\u003e\n\u003cli\u003eUse the included tank seal and strainer during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests pumps throughout the manufacturing process. This F1217A fuel pump and sender assembly is backed by a limited lifetime warranty, giving added confidence for Ford E-150 Econoline, Ford E-250 Econoline, and Ford E-350 Super Duty repairs.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789612213,"sku":"FKDT-F1217A","price":102.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1217A_Fro.jpg?v=1774704986"},{"product_id":"autobest-f1231a-fuel-pump-module-assembly","title":"Autobest F1231A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Econoline\u003c\/h2\u003e\u003cp\u003eAutobest F1231A is a fuel pump module assembly built for direct replacement in select Ford full-size vans. It combines the pump, sending unit, strainer, gasket, and wiring harness in one service-ready assembly for 1992-1996 Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, E-350 Econoline, and E-350 Econoline Club Wagon applications.\u003c\/p\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly line focuses on complete fuel delivery service parts with ethanol-tolerant materials and application-specific components. Part number F1231A is a practical choice for restoring fuel pressure and fuel level signal performance on center-tank Ford Econoline platforms.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete fuel pump module assembly for in-tank service\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, strainer, gasket\/seal, and wire harness\u003c\/li\u003e\n\u003cli\u003e12V turbine-style pump with 7A average current draw\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 33 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 80 to 100 PSI\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and round male connector\u003c\/li\u003e\n\u003cli\u003eEthanol-tolerant construction for modern fuel blends\u003c\/li\u003e\n\u003cli\u003ePerformance-grade design with POM housing and NBR seal material\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1231A is engineered as an in-tank fuel pump module assembly for Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, E-350 Econoline, and E-350 Econoline Club Wagon models from 1992-1996. It is specified for center-tank vehicles with 2 or 3 tube ports and is used in place of two- or three-port pump configurations. The assembly includes the pump, sending unit, float, fuel reservoir, fuel strainer, and tank seal to support a complete fuel system repair. Part number F1231A is also cross-referenced with Airtex E2220M for the same application.\u003c\/p\u003e\u003cp\u003eWith a turbine pump design, 33 GPH average flow, and 80-100 PSI pressure range, this module is built to restore consistent fuel delivery and fuel level reporting in aging Ford van fuel systems. The male 4-pin PIN terminal setup, round connector, and 3\/8 in. quick-connect outlet support a straightforward replacement on the listed Econoline platforms.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak or inconsistent fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stalling from inadequate fuel delivery\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings from a failing sending unit\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load in worn in-tank pump systems\u003c\/li\u003e\n\u003cli\u003eFuel leaks at the tank seal or module interface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify tank configuration, tube-port count, connector style, and outlet connection before installation. This module is for in-tank use and is listed for center-tank Ford Econoline applications only. Confirm the vehicle uses the specified 2- or 3-port setup and compare the original sender resistance range, connector shape, and outlet type before replacing the assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that only top-grade components are used and that each fuel pump is tested throughout manufacturing. The F1231A is backed by a limited lifetime warranty, and the manufacturer also notes superior ethanol tolerance for today’s fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789972661,"sku":"FKDT-F1231A","price":124.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1231A_Fro_82c0c894-9bf9-496d-874f-026673605205.jpg?v=1774704987"},{"product_id":"autobest-f1232a-fuel-pump-and-sender-assembly","title":"Autobest F1232A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ford Trucks\u003c\/h2\u003e\u003cp\u003eThe Autobest F1232A fuel pump and sender assembly is built for direct replacement service in select Ford truck applications. It combines fuel delivery and fuel level sending functions in one in-tank unit, with ethanol-tolerant materials and a turbine pump design for modern fuel systems.\u003c\/p\u003e\u003cp\u003eCompatible with 1997-2010 Ford F-150, 1997-2009 Ford F-250, and 2004 Ford F-150 Heritage applications, this assembly is a practical choice when replacing a worn fuel pump, inaccurate sender, or a unit with poor fuel pressure output.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAutobest Fuel Pump and Sender Assembly, part number F1232A\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design with 12V operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 29 GPH and average current draw of 5.5A\u003c\/li\u003e\n\u003cli\u003eFuel pressure range of 80 to 100 PSI\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, gasket\/seal, strainer, and pump \u0026amp; sender package contents\u003c\/li\u003e\n\u003cli\u003eMale round connector with 4-pin male terminals\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and 0.433 in. inlet size\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for today’s fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Autobest F1232A is a performance-grade in-tank fuel pump and sender assembly engineered for Ford F-150 and Ford F-250 fuel system service. It uses top-grade components and is tested throughout manufacturing to help maintain consistent fuel delivery and sender operation. The assembly is supplied with a fuel sending unit and seal, and it is designed for applications that require a complete pump-and-sender replacement rather than a pump-only repair.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex E2221S and Delphi HP10089 for the same application. If you are searching for a fuel pump and sender assembly for a 1997-2010 Ford F-150, 1997-2009 Ford F-250, or 2004 Ford F-150 Heritage, F1232A is the direct part number to compare.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by low fuel pressure\u003c\/li\u003e\n\u003cli\u003eFuel gauge readings that are inaccurate or intermittent\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stalling from weak fuel delivery\u003c\/li\u003e\n\u003cli\u003eNoise or wear from an aging in-tank pump\u003c\/li\u003e\n\u003cli\u003eFuel system service on Ford F-150 and Ford F-250 trucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eInstall this assembly in the fuel tank using the correct vehicle-specific procedure for the Ford F-150, Ford F-250, or Ford F-150 Heritage application. Verify connector style, outlet connection, and sender resistance before installation. The unit uses a male round connector and a 3\/8 in. quick-connect outlet, so matching the vehicle harness and fuel line connection is important for proper fitment.\u003c\/p\u003e\u003cp\u003eBecause this is an in-tank assembly, clean the tank and inspect the fuel lines before installation. Confirm the sender range and electrical connections match the original system to avoid gauge or drivability issues after replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest builds this fuel pump and sender assembly with top-quality materials and tests it during manufacturing to support consistent performance. The F1232A is backed by a limited lifetime warranty and is specified for ethanol-tolerant fuel system use.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790005429,"sku":"FKDT-F1232A","price":106.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1232A_Fro.jpg?v=1774704987"},{"product_id":"autobest-f1241a-fuel-pump-module-assembly","title":"Autobest F1241A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Super Duty\u003c\/h2\u003e\u003cp\u003eAutobest F1241A is a fuel pump module assembly built for direct replacement in select Ford Super Duty applications. It combines the pump, sending unit, strainer, and seal into one in-tank service part for 1999-2004 Ford F-250 Super Duty and F-350 Super Duty models with California emissions and a center tank.\u003c\/p\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly line focuses on complete fuel delivery service parts with ethanol-tolerant materials and tested components. This F1241A module is a practical choice when servicing a worn fuel pump, inaccurate fuel level readings, or a failing in-tank assembly on Ford F-250 Super Duty and Ford F-350 Super Duty trucks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAutobest F1241A fuel pump module assembly for in-tank installation\u003c\/li\u003e\n\u003cli\u003eFits 1999-2004 Ford F-250 Super Duty and 1999-2004 Ford F-350 Super Duty, center tank, California emissions\u003c\/li\u003e\n\u003cli\u003eIncludes fuel pump, sending unit, float, fuel reservoir, fuel strainer, and tank seal per fitment notes\u003c\/li\u003e\n\u003cli\u003eTurbine pump design with 37 GPH average flow rating\u003c\/li\u003e\n\u003cli\u003e8 amp average current draw and 80-100 PSI operating pressure range\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and dual connector configuration\u003c\/li\u003e\n\u003cli\u003eFuel level sender included; gasket or seal included\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested throughout manufacturing\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1241A is a performance-grade fuel pump module assembly engineered for select Ford Super Duty trucks. It uses an in-tank turbine pump with a male\/female connector layout, 10 terminals, and a quick-connect 3\/8 in. outlet for service-friendly replacement. The module is designed around ethanol-tolerant materials and quality-controlled components to support dependable fuel delivery in modern fuel systems.\u003c\/p\u003e\u003cp\u003eThis part cross-references Bosch 67178 and Delphi FG0360 for the same application. For buyers searching for a Ford F-250 Super Duty fuel pump module assembly or a Ford F-350 Super Duty fuel pump replacement, F1241A provides the pump and sender assembly needed for center-tank service on the listed California emissions trucks.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eIncorrect fuel gauge readings from a failing sending unit\u003c\/li\u003e\n\u003cli\u003eLoss of power under load from a worn in-tank pump\u003c\/li\u003e\n\u003cli\u003eFuel system service needs on center-tank Ford Super Duty trucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall this module in the tank location specified by the fitment data. Confirm California emissions configuration, center tank application, connector style, outlet size, and sender resistance before installation. Replace the tank seal during service and inspect the fuel lines, electrical terminals, and tank opening for wear or contamination before reassembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that only top-grade components are used and that each pump is tested during manufacturing. This fuel pump module assembly is supplied with a Limited Lifetime Warranty for added coverage after installation.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790038197,"sku":"FKDT-F1241A","price":126.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1241A_Fro.jpg?v=1774704988"},{"product_id":"autobest-f1246a-fuel-pump-module-assembly","title":"Autobest F1246A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Super Duty\u003c\/h2\u003e\u003cp\u003eAutobest F1246A is a fuel pump module assembly built for direct replacement in select Ford Super Duty applications. It combines the pump, sending unit, strainer, and seal in one in-tank module for a complete fuel system service on 1999-2004 Ford F-250 Super Duty and Ford F-350 Super Duty models with California emissions and center tank configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine-style fuel pump module assembly\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 34 GPH\u003c\/li\u003e\n\u003cli\u003eOperating current draw: 7.5 amps\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 100 PSI; minimum pump pressure: 80 PSI\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, strainer, and gasket\/seal\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet\u003c\/li\u003e\n\u003cli\u003e12V electrical system with 10-pin PIN terminals\u003c\/li\u003e\n\u003cli\u003ePerformance-grade construction with ethanol-tolerant materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eThis Autobest fuel pump module assembly is engineered for Ford F-250 Super Duty and Ford F-350 Super Duty trucks that require a center tank, California emissions configuration. Part number F1246A is built with top-grade components and a turbine pump design to support steady fuel delivery in modern ethanol-blended fuel systems. The module includes the fuel sending unit and seal, helping restore fuel level reporting and fuel supply performance in one serviceable assembly.\u003c\/p\u003e\u003cp\u003eFor buyers searching for a Ford F-250 Super Duty fuel pump module assembly or Ford F-350 Super Duty fuel pump module assembly, F1246A provides the key components needed for a complete in-tank replacement. This part cross-references Bosch 67226 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Addresses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak or inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eEngine stalling from low fuel pressure\u003c\/li\u003e\n\u003cli\u003eIncorrect fuel gauge readings from a worn sending unit\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load or during acceleration\u003c\/li\u003e\n\u003cli\u003eFuel pump noise or failure inside the tank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify vehicle fitment before installation: Fits 1999-2004 Ford F-250 Super Duty, N\/A, w\/Calif. Emissions; Center Tank; Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer and Tank Seal. Fits 1999-2004 Ford F-350 Super Duty, N\/A, w\/Calif. Emissions; Center Tank; Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer and Tank Seal. Confirm the connector style, outlet type, and tank configuration match the original module before removal. Replace the tank seal during service and inspect the fuel tank for contamination before installing the new module.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-quality materials and tests its fuel pumps throughout manufacturing to help ensure consistent performance. Part number F1246A is backed by a limited lifetime warranty and is supplied for long-term service in compatible Ford Super Duty fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790070965,"sku":"FKDT-F1246A","price":115.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1246A_Fro.jpg?v=1774704988"},{"product_id":"autobest-f1247-electric-fuel-pump","title":"Autobest F1247 Electric Fuel Pump","description":"\u003ch2\u003eElectric Fuel Pump for Ford Super Duty Applications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1247 electric fuel pump is built for select Ford truck and van applications that require a frame-mounted external fuel pump. It uses a rollervane design, 12V operation, and a 130 GPH average flow rating to support consistent fuel delivery in demanding systems. This Autobest fuel pump is a direct-fit style replacement for several 1998-2003 Ford E-Series and Super Duty applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExternal, frame-mounted electric fuel pump design\u003c\/li\u003e\n\u003cli\u003eRollervane pump type for steady fuel delivery\u003c\/li\u003e\n\u003cli\u003e12V operation with 7.5 amp average current draw\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 130 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 94.3 to 137.8 PSI\u003c\/li\u003e\n\u003cli\u003eThreaded male inlet with quick-connect outlet\u003c\/li\u003e\n\u003cli\u003eFKM gasket or seal included\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAutobest Electric Fuel Pump F1247 is engineered for fuel systems that need a reliable external pump with strong pressure capability and stable flow. The pump uses top-grade components and is tested throughout manufacturing to help maintain consistent performance. It includes the accessories needed for a complete installation, while the strainer is sold separately. This part cross-references Airtex E2236 and Bosch 69136 for the same application. Fits 1998-2003 Ford E-350 Econoline, 1998-2003 Ford E-350 Econoline Club Wagon, 1999-2003 Ford E-350 Super Duty, 2000-2003 Ford Excursion, 1999-2003 Ford F-250 Super Duty, 1999-2003 Ford F-350 Super Duty, and 2003 Ford E-350 Club Wagon. The Autobest F1247 is a practical replacement choice for Ford E-350 Super Duty fuel pump and Ford F-250 Super Duty fuel delivery service needs.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Pump Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load or at higher demand\u003c\/li\u003e\n\u003cli\u003eFailure of an aging frame-mounted electric fuel pump\u003c\/li\u003e\n\u003cli\u003ePoor drivability related to worn pump output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle uses a frame-mounted external pump before ordering. Match the inlet and outlet style, pressure requirements, and electrical connection type to the original setup. The strainer is not included, so verify whether the existing strainer can be reused or replaced separately. This pump is intended for 12V systems and does not include a wire harness or regulator.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses quality materials and tests pumps during manufacturing to help ensure dependable operation. The F1247 includes a limited lifetime warranty and is built with ethanol-tolerant construction for today’s fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790103733,"sku":"FKDT-F1247","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1247_Fro.jpg?v=1774704988"},{"product_id":"autobest-f1248a-fuel-pump-and-sender-assembly","title":"Autobest F1248A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ford Trucks\u003c\/h2\u003e\u003cp\u003eAutobest F1248A is a fuel pump and sender assembly for select Ford F-150 and Ford F-250 applications. It combines fuel delivery and fuel level sending functions in one in-tank unit, with ethanol-tolerant materials and a complete installation-focused design.\u003c\/p\u003e\u003cp\u003eBuilt for 12V systems, this Autobest fuel pump and sender assembly is a direct-fit option for Ford truck owners replacing a worn pump, inaccurate fuel gauge sender, or a failing in-tank module. The F1248A is engineered for consistent fuel delivery and dependable tank level reporting.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFuel pump and sender assembly for in-tank installation\u003c\/li\u003e\n\u003cli\u003ePerformance-grade turbine pump design\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 145 GPH\u003c\/li\u003e\n\u003cli\u003eOperating pressure range: 80 to 109 PSI\u003c\/li\u003e\n\u003cli\u003eAverage current draw: 5.8 A\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet with round male connector\u003c\/li\u003e\n\u003cli\u003eFuel sending unit, gasket\/seal, and strainer included\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1248A fuel pump and sender assembly is built for Ford F-150 and Ford F-250 trucks that require an in-tank fuel delivery module with integrated fuel level sensing. It uses a turbine-style pump and a single 3\/8 in. quick-connect outlet, along with a 0.433 in. inlet strainer and NBR seal material for service-ready replacement. The assembly is designed for 12V electrical systems and uses a male round connector with four male pin terminals.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex E2237S and Carter P74853S for the same application. It is a practical replacement choice for Ford F-150, Ford F-150 Heritage, and Ford F-250 fuel system service where the pump and sender are serviced together. Part number F1248A is also listed under interchange references used across multiple aftermarket catalogs.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1997-1998 Ford F-150, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1999-2003 Ford F-150, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004 Ford F-150 Heritage, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1997-1998 Ford F-250, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1999 Ford F-250, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2000-2009 Ford F-250, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores fuel delivery when the in-tank pump is weak or no longer primes\u003c\/li\u003e\n\u003cli\u003eAddresses inaccurate fuel level readings from a worn sender\u003c\/li\u003e\n\u003cli\u003eReplaces a noisy or inconsistent fuel pump module\u003c\/li\u003e\n\u003cli\u003eHelps correct hard-start or no-start conditions tied to fuel pressure loss\u003c\/li\u003e\n\u003cli\u003eSupports repair of fuel starvation under load in Ford truck applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall this assembly in the fuel tank and verify connector style, outlet size, and sender resistance before installation. The module uses a quick-connect outlet and a single male round connector, so matching the vehicle harness and fuel line connection is important. Replace the tank seal during service and inspect the tank interior for contamination before installing the new unit.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that only top-grade components are used and that each pump is tested throughout the manufacturing process. The F1248A is supplied with a limited lifetime warranty and is built with ethanol-tolerant materials for current fuel system demands.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790136501,"sku":"FKDT-F1248A","price":89.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1248A_Fro.jpg?v=1774704988"},{"product_id":"autobest-f1249a-fuel-pump-module-assembly","title":"Autobest F1249A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Super Duty\u003c\/h2\u003e\u003cp\u003eThe Autobest F1249A fuel pump module assembly is built for direct replacement in select Ford Super Duty applications. It combines the pump, sending unit, strainer, and seal in one assembly for a complete in-tank fuel system service.\u003c\/p\u003e\u003cp\u003eDesigned for 1999-2004 Ford F-250 Super Duty and Ford F-350 Super Duty models with a center tank and without California emissions, this module supports consistent fuel delivery with ethanol-tolerant materials and a turbine-style pump design.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank fuel pump module assembly for 12V systems\u003c\/li\u003e\n\u003cli\u003eTurbine pump design with 7A average current draw\u003c\/li\u003e\n\u003cli\u003e32 GPH average flow rating and 80-100 PSI operating range\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, strainer, and NBR seal\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet with 1 male round connector\u003c\/li\u003e\n\u003cli\u003ePerformance-grade construction with POM housing material\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest Fuel Pump Module Assembly F1249A is a direct-fit in-tank replacement for the fuel delivery system on 1999-2004 Ford F-250 Super Duty and Ford F-350 Super Duty trucks. It is specified for center tank applications without California emissions and includes the fuel pump, sending unit, float, fuel reservoir, fuel strainer, and tank seal for a complete service solution. The module uses a turbine pump, a 3\/8 in. quick-connect outlet, and a 4-pin male PIN terminal layout for straightforward integration with the vehicle’s fuel system.\u003c\/p\u003e\u003cp\u003eThis part cross-references Bosch 67175 and Carter P75035M for the same application. The F1249A is also listed among interchange references used for OE-style replacement searches, including Ford Super Duty fuel pump module assembly and Ford F-250 Super Duty fuel sending unit replacement.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eIncorrect fuel level readings from a worn sending unit\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load in center tank applications\u003c\/li\u003e\n\u003cli\u003eNoise or failure from an aging in-tank pump module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the truck’s tank configuration, emissions setup, and connector style before installation. This module is listed for center tank applications only, and the vehicle must match the confirmed fitment details for 1999-2004 Ford F-250 Super Duty and Ford F-350 Super Duty. Inspect the tank opening, electrical connector, and fuel line connection points before installing the new assembly.\u003c\/p\u003e\u003cp\u003eBecause this is an in-tank module, clean the tank area thoroughly and confirm the seal seats correctly before reassembly. The F1249A includes the pump module and related service components needed for the application, but mounting hardware and wire harness are not included.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-grade components and tests fuel pumps throughout the manufacturing process to help maintain consistent quality. The F1249A is backed by a Limited Lifetime Warranty and is built with materials selected for ethanol tolerance in today’s fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790202037,"sku":"FKDT-F1249A","price":123.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1249A_Fro.jpg?v=1774704989"},{"product_id":"autobest-f1254a-fuel-pump-module-assembly","title":"Autobest F1254A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for 1999 Taurus and Sable\u003c\/h2\u003e\u003cp\u003eThe Autobest F1254A fuel pump module assembly is built for direct replacement in select 1999 Ford Taurus and Mercury Sable applications. It includes the pump and module components needed for a complete in-tank fuel delivery service, with ethanol-tolerant materials for modern fuel blends.\u003c\/p\u003e\u003cp\u003eAutobest F1254A is a performance-grade, in-tank fuel pump module assembly with a turbine pump design, 12V operation, and a 3\/8 in. quick-connect outlet. It is engineered with top-grade components and tested throughout manufacturing to support consistent fuel delivery and sender operation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFuel pump module assembly for in-tank installation\u003c\/li\u003e\n\u003cli\u003eFits 1999 Ford Taurus and 1999 Mercury Sable\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, gasket or seal, and strainer\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet with 1 outlet\u003c\/li\u003e\n\u003cli\u003eTurbine pump design with 80-100 PSI operating range\u003c\/li\u003e\n\u003cli\u003e12V electrical system with 5.8A average current draw\u003c\/li\u003e\n\u003cli\u003eEthanol-tolerant construction for today’s fuel systems\u003c\/li\u003e\n\u003cli\u003eMale\/female connectors with 10 terminals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest Part Number F1254A is a fuel pump module assembly for 1999 Ford Taurus and Mercury Sable models listed in the fitment data. It is supplied as an in-tank module with the fuel sending unit, fuel strainer, and tank seal, making it a practical replacement for vehicles showing fuel delivery or fuel level reporting concerns. The module uses a turbine-style pump, POM housing, and NBR seal material, with a 29 GPH average flow rating and a maximum pump pressure of 100 PSI.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex E2243M and Carter P74951M for the same application. If you are searching for an Autobest F1254A fuel pump module assembly for a 1999 Ford Taurus or 1999 Mercury Sable, this unit matches the listed OE-style application details and connector layout.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel gauge readings that do not match tank level\u003c\/li\u003e\n\u003cli\u003eLoss of power under load from restricted pump output\u003c\/li\u003e\n\u003cli\u003eFuel starvation related to a worn in-tank module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall this module in the fuel tank and verify connector style, outlet type, and sender resistance before installation. The assembly uses a quick-connect outlet and male\/female electrical terminals, so matching the vehicle harness and fuel line connection is important. Replace the tank seal during service and inspect the tank opening, wiring, and fuel lines for wear or contamination before reassembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that this fuel pump module uses top-quality materials and is tested during manufacturing to help ensure consistent quality. Part number F1254A is backed by a limited lifetime warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790267573,"sku":"FKDT-F1254A","price":106.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1254A_Fro.jpg?v=1774704989"},{"product_id":"autobest-f1255a-fuel-pump-module-assembly","title":"Autobest F1255A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Mustang\u003c\/h2\u003e\u003cp\u003eThe Autobest F1255A fuel pump module assembly is built for 1999-2000 Ford Mustang applications and includes the pump, sending unit, fuel reservoir, fuel strainer, and tank seal for a complete in-tank fuel system service. It is a performance-grade replacement with ethanol-tolerant materials, a turbine pump design, and a 12V electrical setup for consistent fuel delivery.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1999-2000 Ford Mustang, in tank\u003c\/li\u003e\n\u003cli\u003eAutobest F1255A fuel pump module assembly for direct fuel system replacement\u003c\/li\u003e\n\u003cli\u003eTurbine pump design with 45 GPH average flow rating\u003c\/li\u003e\n\u003cli\u003eOperating range of 80-100 PSI with 9A average current draw\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, strainer, gasket\/seal, and pump module components\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade materials for ethanol tolerance in modern fuel blends\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet and dual connector configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1255A is a fuel pump module assembly for Ford Mustang models from 1999-2000. It is engineered as an in-tank replacement with a turbine-style pump, POM housing, NBR seal material, and a 12V electrical system. The module includes the fuel sending unit and strainer, and it uses a 3\/8 in. quick-connect outlet for service-friendly fuel line connection. For buyers searching for a 1999 Ford Mustang fuel pump module assembly or a 2000 Ford Mustang fuel pump replacement, this part number F1255A matches the listed application.\u003c\/p\u003e\u003cp\u003eThis part cross-references Bosch 67142 and Delphi FG0826 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Symptoms\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting or extended crank time\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eFuel level gauge readings that are inaccurate or intermittent\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure under load\u003c\/li\u003e\n\u003cli\u003eFuel pump noise from the tank area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall this module in the fuel tank and verify connector style, outlet size, and sender resistance before assembly. The module uses a male\/female connector arrangement with 10 pin terminals and a rectangle-plus-round connector shape. Confirm tank seal condition and inspect the fuel lines and electrical connections during replacement to help ensure proper operation after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that each fuel pump is tested throughout the manufacturing process and built from top-grade components. The F1255A is supplied with a limited lifetime warranty, and the manufacturer description also notes strong ethanol tolerance for today’s fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790365877,"sku":"FKDT-F1255A","price":114.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1255A_Fro.jpg?v=1774704990"},{"product_id":"autobest-f1256a-fuel-pump-module-assembly","title":"Autobest F1256A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Super Duty\u003c\/h2\u003e\u003cp\u003eThe Autobest F1256A fuel pump module assembly is built for direct replacement in select Ford truck applications. It combines the pump, sending unit, float, fuel reservoir, strainer, and tank seal into one service-ready assembly for a complete fuel delivery repair.\u003c\/p\u003e\u003cp\u003eCompatible with 1999-2004 Ford F-250 Super Duty and 1999-2004 Ford F-350 Super Duty center tank applications without California emissions, this module supports consistent fuel delivery for demanding truck use. The Autobest fuel pump module assembly line focuses on quality materials and ethanol-tolerant construction for modern fuel systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number F1256A fuel pump module assembly\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 34 GPH\u003c\/li\u003e\n\u003cli\u003eOperating range: 80 to 100 PSI\u003c\/li\u003e\n\u003cli\u003e12V electrical system with 7.5A average current draw\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included\u003c\/li\u003e\n\u003cli\u003eStrainer and tank seal included\u003c\/li\u003e\n\u003cli\u003e3\/8 in. quick-connect outlet\u003c\/li\u003e\n\u003cli\u003eMale connector with 1 round connector and 4-pin terminal layout\u003c\/li\u003e\n\u003cli\u003ePerformance-grade construction with ethanol-tolerant materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1256A is a fuel pump module assembly engineered for select Ford Super Duty and Ford F-250 applications. It is designed as an in-tank replacement with a turbine-style pump, POM housing, NBR seal material, and external\/internal strainer support. The module is built for 12V systems and uses a single 3\/8 in. quick-connect outlet for straightforward fuel line connection.\u003c\/p\u003e\u003cp\u003eThis part cross-references Airtex E2245M and Carter P75036M for the same application. It is a practical choice when servicing a Ford F-250 Super Duty fuel pump module assembly or replacing a Ford F-350 Super Duty center tank unit with the correct sending unit and reservoir components already integrated.\u003c\/p\u003e\u003ch2\u003eCommon Repair Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel pressure\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load or during acceleration\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel level readings from a worn sending unit\u003c\/li\u003e\n\u003cli\u003eIntermittent pump operation from internal wear\u003c\/li\u003e\n\u003cli\u003eFuel delivery issues in center tank Ford Super Duty setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses the center tank configuration and matches the listed emissions and model-year requirements before installation. Confirm connector style, outlet size, and sender resistance values during diagnosis to avoid repeat repairs. Because mounting hardware and wire harness are not included, reuse or source the required vehicle-specific components as needed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that each pump uses top-grade components and is tested throughout manufacturing to help ensure consistent quality. The F1256A is backed by a limited lifetime warranty, and the product line is also described as offering strong ethanol tolerance for today’s fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790398645,"sku":"FKDT-F1256A","price":110.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1256A_Fro.jpg?v=1774704990"},{"product_id":"autobest-f1257a-fuel-pump-module-assembly","title":"Autobest F1257A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Escort and Mercury Tracer\u003c\/h2\u003e\u003cp\u003eAutobest F1257A is a fuel pump module assembly built for direct replacement in select Ford Escort and Mercury Tracer applications. It combines the pump, sending unit, strainer, and tank seal in one in-tank module for a complete fuel delivery service solution.\u003c\/p\u003e\u003cp\u003eWith ethanol-tolerant materials, a turbine-style pump, and a 12V electrical design, this Autobest fuel pump module assembly is suited for 1997-2003 Ford Escort and 1999 Mercury Tracer applications. The F1257A is a practical choice when servicing a worn fuel pump module on these vehicles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAutobest Fuel Pump Module Assembly, part number F1257A\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design with 12V operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 34 GPH and average current draw of 8A\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit, strainer, and gasket\/seal\u003c\/li\u003e\n\u003cli\u003eQuick-connect 3\/8 in. outlet with one male connector\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for modern fuel systems\u003c\/li\u003e\n\u003cli\u003ePerformance-grade housing and tested through manufacturing checks\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty from Autobest\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1257A fuel pump module assembly is engineered for in-tank fuel delivery service on select Ford Escort and Mercury Tracer models. It uses a turbine pump design with a maximum pressure rating of 100 PSI and a minimum pressure rating of 80 PSI, helping maintain consistent fuel supply for the vehicle’s fuel system. The module includes the fuel sending unit and a tank seal, and it uses a strainer inlet to support clean fuel pickup. This part cross-references Delphi FG0836 and Carter P74955M for the same application.\u003c\/p\u003e\u003cp\u003eCompatible With: Fits 1997-1998 Ford Escort, Mexico; Fuel Pump Module Assembly. Fits 1999-2003 Ford Escort, N\/A. Fits 1999 Mercury Tracer, N\/A. The F1257A is a direct-fit option for drivers servicing a Ford Escort fuel pump module assembly or a Mercury Tracer fuel pump replacement.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part May Resolve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak or failing fuel delivery\u003c\/li\u003e\n\u003cli\u003eEngine stalling from inconsistent fuel pressure\u003c\/li\u003e\n\u003cli\u003eFuel gauge errors related to a worn sending unit\u003c\/li\u003e\n\u003cli\u003eLoss of power under load from reduced pump output\u003c\/li\u003e\n\u003cli\u003eFuel starvation from a damaged or clogged in-tank module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstall this module in the fuel tank and verify connector style, outlet size, and vehicle fitment before service. Because mounting hardware and wire harness are not included, reuse or source the required vehicle-specific components as needed. Always inspect the tank, lines, and electrical connector condition during replacement to help prevent repeat fuel system issues.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-grade components and tests fuel pumps throughout the manufacturing process to support consistent quality. The F1257A is supplied with a limited lifetime warranty and is built with materials selected for ethanol tolerance in today’s fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790464181,"sku":"FKDT-F1257A","price":113.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1257A_Fro.jpg?v=1774704990"},{"product_id":"autobest-f1259a-fuel-pump-module-assembly","title":"Autobest F1259A Fuel Pump Module Assembly","description":"\u003ch2\u003eFuel Pump Module Assembly for Ford Windstar\u003c\/h2\u003e\u003cp\u003eAutobest F1259A is a fuel pump module assembly built for direct replacement in select Ford Windstar applications. It combines the pump, sending unit, strainer, and seal components needed for a complete in-tank fuel delivery service, with ethanol-tolerant materials for modern fuel systems.\u003c\/p\u003e\u003cp\u003eCompatible With 1995-2003 Ford Windstar fuel pump module assembly applications, this Autobest unit is engineered for steady fuel delivery and accurate tank level reporting. The F1259A part number is also referenced in cross-application listings for the same vehicle coverage.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine pump design for OE-style fuel delivery\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 34 GPH\u003c\/li\u003e\n\u003cli\u003eOperating range of 80 to 100 PSI\u003c\/li\u003e\n\u003cli\u003e12V electrical system with 7A average current draw\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for level signal restoration\u003c\/li\u003e\n\u003cli\u003eStrainer and NBR gasket\/seal included\u003c\/li\u003e\n\u003cli\u003eQuick-connect 3\/8 in. outlet with dual connector configuration\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested throughout manufacturing\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for current fuel blends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAutobest Fuel Pump Module Assembly F1259A is a performance-grade, in-tank replacement for Ford Windstar fuel system service. It uses a turbine-style pump, POM housing, and a strainer setup designed for clean fuel pickup and stable operation. The module includes the fuel sending unit and seal, making it a practical choice when the original assembly has worn pump output, inaccurate fuel level readings, or fuel delivery inconsistency. This part cross-references Airtex Fuel Pumps E2248M and Carter P74952M for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by low fuel pressure\u003c\/li\u003e\n\u003cli\u003eEngine hesitation or stalling from weak pump output\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings from a failing sending unit\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load from restricted in-tank delivery\u003c\/li\u003e\n\u003cli\u003eNoise or intermittent operation from a worn module assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the connector style, outlet size, and tank configuration before installation. This module is designed for in-tank use and does not include mounting hardware or a wire harness. Replace the tank seal during service and inspect the fuel tank for contamination before installing the new assembly. Confirm fitment for 1995-1998 Ford Windstar, 1999-2000 Ford Windstar, and 2001-2003 Ford Windstar applications before ordering.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that each fuel pump is built from top-grade components and tested at multiple stages of production. The F1259A is supplied with a limited lifetime warranty, and the manufacturer also notes a 12-month unlimited mileage warranty.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790529717,"sku":"FKDT-F1259A","price":111.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1259A_Fro.jpg?v=1774704991"},{"product_id":"autobest-f1263a-fuel-pump-and-sender-assembly","title":"Autobest F1263A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eFuel Pump and Sender Assembly for Ford and Lincoln\u003c\/h2\u003e\u003cp\u003eAutobest F1263A is a fuel pump and sender assembly built for direct replacement in select Ford and Lincoln applications. It combines the pump, sending unit, float, strainer, and tank seal in one in-tank assembly for 1999-2002 Ford Expedition and 1999 Lincoln Navigator service needs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank turbine-style fuel pump with a 34 GPH average flow rating\u003c\/li\u003e\n\u003cli\u003eOperating range of 80-100 PSI with 12V electrical system support\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level reporting\u003c\/li\u003e\n\u003cli\u003eQuick-connect 3\/8 in. outlet and dual connector design\u003c\/li\u003e\n\u003cli\u003eExternal strainer included; fuel filter and regulator not included\u003c\/li\u003e\n\u003cli\u003eBuilt with ethanol-tolerant materials for modern fuel blends\u003c\/li\u003e\n\u003cli\u003eIncludes gasket\/seal material in NBR for tank sealing\u003c\/li\u003e\n\u003cli\u003eAutobest F1263A is backed by a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1263A is a complete fuel pump and sender assembly for Ford Expedition and Lincoln Navigator applications listed below. It is an in-tank turbine pump with a male\/female connector layout, 10-pin terminal design, and a 3\/8 in. quick-connect outlet, making it a practical replacement for vehicles that need both fuel delivery and fuel level sending in one unit. The assembly is engineered for performance use and is tested throughout manufacturing to help maintain consistent output and fit. This part cross-references Airtex Fuel Pumps E2252S and Delphi HP10131 for the same application.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1999-2002 Ford Expedition, N\/A, with Auto Adjustable Suspension; includes fuel pump, sending unit, float, fuel strainer, and tank seal.\u003c\/li\u003e\n\u003cli\u003eFits 1999 Lincoln Navigator, N\/A, fuel pump and sender assembly includes fuel pump, sending unit, float, fuel strainer, and tank seal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak or failing in-tank fuel delivery\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings from a worn sending unit\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load from reduced pump output\u003c\/li\u003e\n\u003cli\u003eIntermittent engine stalling related to inconsistent fuel pressure\u003c\/li\u003e\n\u003cli\u003eFuel system service needs when the pump, sender, and seal are replaced together\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm tank access, connector style, outlet size, and fitment notes before installation. This assembly is designed for in-tank use and includes a strainer and tank seal; mounting hardware and wire harness are not included. Verify the vehicle’s fuel system requirements and inspect the tank for contamination before installing the new assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest uses top-grade components and tests fuel pumps throughout the manufacturing process to help maintain consistent quality. F1263A is supplied with a limited lifetime warranty, and the manufacturer notes improved ethanol tolerance for today’s fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790562485,"sku":"FKDT-F1263A","price":109.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1263A_Fro.jpg?v=1774704991"},{"product_id":"autobest-f1265-electric-fuel-pump","title":"Autobest F1265 Electric Fuel Pump","description":"\u003ch2\u003eAutobest F1265 Electric Fuel Pump\u003c\/h2\u003e\u003cp\u003eThe Autobest F1265 is an in-tank electric fuel pump built for select Lincoln applications, including the 1999-2002 Lincoln Navigator and 2002 Lincoln Blackwood. It uses a turbine-style design with a 13.5V operating range, 205 GPH average flow rating, and ethanol-tolerant materials for modern fuel systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIn-tank electric fuel pump for fuel delivery service\u003c\/li\u003e\n\u003cli\u003eTurbine pump design with 205 GPH average flow rating\u003c\/li\u003e\n\u003cli\u003eOperates at 13.5V with an 8A average current draw\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 123.25 PSI and minimum pump pressure of 79.8 PSI\u003c\/li\u003e\n\u003cli\u003eMale pin-style electrical connection with 2 connectors and 2 terminals\u003c\/li\u003e\n\u003cli\u003eBuilt with top-grade components and tested throughout manufacturing\u003c\/li\u003e\n\u003cli\u003eSuperior ethanol tolerance for today’s fuel blends\u003c\/li\u003e\n\u003cli\u003eIncludes accessories needed for a complete installation; strainer sold separately\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAutobest F1265 is an electric fuel pump engineered for direct fuel delivery service in the tank. It is listed for 1999-2002 Lincoln Navigator and 2002 Lincoln Blackwood applications, making it a focused replacement choice for owners searching for a Lincoln Navigator fuel pump or a 2002 Lincoln Blackwood electric fuel pump. The pump is designed with a turbine-style internal layout, male pin connectors, and an external strainer arrangement, and it is built using materials selected for ethanol-blended fuel systems. Autobest F1265 cross-references Airtex E2254 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard starting caused by weak fuel delivery\u003c\/li\u003e\n\u003cli\u003eEngine hesitation from low fuel pressure\u003c\/li\u003e\n\u003cli\u003eStalling related to inconsistent pump output\u003c\/li\u003e\n\u003cli\u003eFuel starvation under load or acceleration\u003c\/li\u003e\n\u003cli\u003ePoor drivability from a failing in-tank pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm vehicle fitment before installation. This pump is specified for in-tank use and includes accessories needed for installation, while the strainer is sold separately. For warranty validation on listed applications, use the required strainer: F276S for 2002 Lincoln Blackwood and F299S for 1999-2002 Lincoln Navigator. Verify connector style, inlet and outlet configuration, and tank seal requirements before assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAutobest states that only top-grade components are used and that each pump is tested at multiple stages during manufacturing. The F1265 is backed by a limited lifetime warranty and is intended for buyers who want a tested replacement fuel pump for Lincoln Navigator and Lincoln Blackwood service.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790595253,"sku":"FKDT-F1265","price":39.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1265_Fro.jpg?v=1774704991"}],"url":"https:\/\/www.partcatalog.com\/collections\/fuel-pumps-and-related-components.oembed?page=150","provider":"PartCatalog","version":"1.0","type":"link"}