{"title":"Air and Fuel Delivery \u003e Fuel Pumps and Related Components","description":"\u003cp\u003eFuel pumps keep your engine fed — whether that's a drop-in electric pump inside the tank, a complete module assembly with integrated sender, or a high-pressure direct injection pump on the cam. Most modern vehicles use an in-tank electric fuel pump rated between 40–90 PSI depending on the system; DI applications run significantly higher, often 1,500–2,900 PSI. Electric pumps typically last 100,000–150,000 miles but can fail earlier from running a low tank frequently, degraded fuel, or a clogged strainer. When replacing, match the flow rate (GPH), operating pressure, and connector type to your application. Module assemblies are the smart buy for most in-tank repairs — they include the pump, sending unit, float, and strainer as a matched set, which eliminates the guesswork of mixing components and recalibrating the fuel gauge. OEM-spec units from brands like Delphi, Denso, Carter, and Bosch carry engineering validation that bare-minimum budget pumps often lack.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine cranks but won't start, or stalls immediately after starting.\u003c\/strong\u003e A pump that can't build pressure to the injectors will leave you with no-start conditions — check fuel rail pressure first before condemning other components; spec varies by vehicle but most port-injected engines need 40–65 PSI at idle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard start when the engine is hot, but starts fine when cold.\u003c\/strong\u003e Heat causes worn pump motors to draw excessive current or fail intermittently; if the pump driver module is involved, it may also throw a U-code or reduce pump speed incorrectly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFuel gauge reads erratically, stays on empty, or pegs full.\u003c\/strong\u003e The sending unit or float inside the module has failed — common on high-mileage vehicles and a sign the full module assembly should be replaced rather than just the pump.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhining, buzzing, or droning noise from the fuel tank under load or acceleration.\u003c\/strong\u003e A healthy fuel pump runs quietly; a high-pitched whine — especially at highway speeds or under load — indicates a worn motor or cavitation from a clogged strainer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine hesitates or surges under hard acceleration or at highway speed.\u003c\/strong\u003e Intermittent pressure drops caused by a weakening pump typically show up first under high fuel demand — a fuel pressure drop test at WOT will usually confirm it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDTC codes P0087, P0088, P0191, or P0230 in the ECU.\u003c\/strong\u003e These point directly to fuel system pressure faults or pump circuit failures and are strong indicators the pump, pump driver module, or associated wiring needs attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow long does a fuel pump last, and is there a scheduled replacement interval?\u003c\/strong\u003e\n  Fuel pumps don't have a fixed replacement interval like a timing belt — they're replaced on failure or symptoms. Most electric in-tank pumps last 100,000–150,000 miles under normal use. Running the tank below a quarter frequently shortens life, since fuel cools and lubricates the pump motor. Inspect at 100k if you're doing major in-tank work anyway.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eIs it worth buying an OEM fuel pump, or is aftermarket just as good?\u003c\/strong\u003e\n  For daily drivers, quality aftermarket brands — Delphi, Carter, Denso, Bosch, Walbro — are engineered to OEM spec and often used as OEM supplier parts anyway. Avoid no-name pumps; incorrect pressure ratings, weak motor windings, and premature strainer failure are common complaints. For turbocharged or modified engines, verify the pump's flow rate (GPH) exceeds your fuel system's demand.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat else should I replace when I pull the fuel pump module?\u003c\/strong\u003e\n  Always replace the fuel strainer\/sock and the tank O-ring or seal — both are inexpensive and inaccessible without dropping the tank again. If the sending unit shows any corrosion or the float arm is bent, replace the full module assembly rather than just the pump. On GDI engines, inspect the cam follower and push rod at the same time; these wear together with the high-pressure pump.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"airtex-e2434m-fuel-pump-module-assembly","title":"Airtex E2434M Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Airtex Fuel Pump Module Assembly E2434M\u003c\/h2\u003e\u003cp\u003eThe Airtex Fuel Pump Module Assembly E2434M is designed specifically for Ford F-150 models, providing reliable in-tank fuel delivery. This electric fuel pump module includes a fuel sending unit and is engineered to meet the exact specifications required for optimal performance in your vehicle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level readings\u003c\/li\u003e\n\u003cli\u003eNegative ground electrical system compatibility\u003c\/li\u003e\n\u003cli\u003eWhite rectangular male connector with four blade terminals\u003c\/li\u003e\n\u003cli\u003eIn-tank electric pump with external strainer inlet\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet fitting with 5\/16 inch thread size\u003c\/li\u003e\n\u003cli\u003eIncludes gasket for secure sealing\u003c\/li\u003e\n\u003cli\u003eMinimum flow rating of 30.0 gallons per hour and minimum pressure of 55 psi\u003c\/li\u003e\n\u003cli\u003eSpecific fitment for Ford F-150 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Airtex E2434M fuel pump module assembly is an electric pump designed for internal tank installation in Ford F-150 trucks. It features a fuel sending unit to provide accurate fuel level data to the vehicle’s gauge. The module uses a negative ground system and connects via a white rectangular male connector with four blade terminals, ensuring proper electrical connection. The pump’s inlet is equipped with an external strainer to prevent debris from entering the fuel system, while the outlet uses a quick connect fitting with a 5\/16 inch thread size for secure fuel line attachment. This assembly includes a gasket to maintain a tight seal and prevent leaks. The pump delivers a consistent flow rate of 30 gallons per hour and maintains a minimum pressure of 55 psi, supporting the fuel demands of the Ford F-150 engine.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Ford F-150 trucks\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate fuel level readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eFixes fuel delivery problems causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eAddresses fuel leaks by providing a new gasket seal\u003c\/li\u003e\n\u003cli\u003eImproves fuel system reliability in models requiring specific fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Airtex E2434M fuel pump module assembly requires removal of the fuel tank. Ensure the vehicle is safely supported and the fuel system is depressurized before beginning. The included gasket should be properly seated to prevent leaks. Verify the connector color and terminal type match the vehicle’s wiring harness. Since mounting hardware and lock ring are not included, reuse the original components or source replacements as needed. Confirm the negative ground system compatibility and secure all electrical connections to avoid operational issues.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eAirtex fuel pump modules are manufactured to meet OEM specifications for fit, form, and function. The E2434M part number undergoes rigorous testing to ensure consistent flow rate and pressure performance. This product includes a gasket for sealing integrity but does not include a regulator or fuel tank pressure sensor. Warranty coverage details should be confirmed with the distributor or retailer, as Airtex typically offers limited warranties covering defects in materials and workmanship.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384422138037,"sku":"HYVJ-E2434M","price":142.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E2434M_Fro_e0c60513-7398-4f17-8f22-e09a6dba910e.jpg?v=1774702615"},{"product_id":"airtex-e2527m-fuel-pump-module-assembly","title":"Airtex E2527M Fuel Pump Module Assembly - Front","description":"\u003ch2\u003eReliable Fuel Pump Module Assembly for Ford E-Series Vans\u003c\/h2\u003e\u003cp\u003eThe Airtex E2527M fuel pump module assembly is designed specifically for Ford E-150, E-250, and E-350 Super Duty models. This in-tank electrical fuel pump ensures consistent fuel delivery with a flow rate of 60 liters per hour, meeting the demands of your vehicle's fuel system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level readings\u003c\/li\u003e\n\u003cli\u003e300 mm wiring harness length with 20 gauge wire for reliable electrical connections\u003c\/li\u003e\n\u003cli\u003eWhite rectangular male connector with 4 blade terminals\u003c\/li\u003e\n\u003cli\u003ePlastic housing with a 152 mm top mount diameter for precise fitment\u003c\/li\u003e\n\u003cli\u003eIncludes strainer and gasket for proper filtration and sealing\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet port and 3\/8 inch inlet fitting thread size\u003c\/li\u003e\n\u003cli\u003eDesigned for specific fitment on Ford E-150, E-250, and E-350 Super Duty\u003c\/li\u003e\n\u003cli\u003eOperates on 12V electrical system with a minimum pressure rating of 50 psi\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Airtex E2527M fuel pump module assembly is engineered as an internal, in-tank electrical pump tailored for Ford E-Series vans including the E-150, E-250, and E-350 Super Duty. Featuring a 60 LPH flow rate and a minimum pressure of 50 psi, this module supports consistent fuel delivery to maintain engine performance. The assembly includes a fuel sending unit for accurate fuel gauge readings and a strainer to help prevent debris from entering the fuel system. The plastic housing and 152 mm top mount diameter ensure a secure and precise fit. The connector is a white, rectangular male type with four blade terminals, designed for compatibility with the vehicle’s wiring harness. The quick connect outlet and port inlet facilitate straightforward fuel line connections.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Ford E-150, E-250, and E-350 Super Duty\u003c\/li\u003e\n\u003cli\u003eResolves inconsistent fuel gauge readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eAddresses fuel delivery interruptions caused by clogged or damaged pump modules\u003c\/li\u003e\n\u003cli\u003eFixes low fuel pressure issues affecting engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents fuel system contamination with included strainer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with Ford E-150, E-250, or E-350 Super Duty before installation\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery and relieve fuel system pressure prior to removal\u003c\/li\u003e\n\u003cli\u003eHandle the fuel sending unit carefully to avoid damage\u003c\/li\u003e\n\u003cli\u003eVerify the 152 mm top mount diameter matches the vehicle’s fuel tank opening\u003c\/li\u003e\n\u003cli\u003eUse the included gasket to ensure a proper seal and prevent leaks\u003c\/li\u003e\n\u003cli\u003eCheck connector orientation and wiring gauge for secure electrical connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAirtex fuel pump modules are manufactured to meet OEM specifications for fit, form, and function. The E2527M part undergoes rigorous testing to ensure durability and reliable performance in Ford E-Series vans. This product includes a gasket and strainer to support long-term operation. Warranty coverage details should be confirmed with the product documentation or supplier.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384424235189,"sku":"HYVJ-E2527M","price":226.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E2527M_Fro_7f780bf5-9d7a-4cb3-b8fb-4dc24f2cbf08.jpg?v=1774702616"},{"product_id":"airtex-e3506m-fuel-pump-module-assembly","title":"Airtex E3506M Fuel Pump Module Assembly","description":"\u003ch2\u003eReliable Fuel Pump Module Assembly for Chevrolet and GMC\u003c\/h2\u003e\u003cp\u003eThe Airtex E3506M fuel pump module assembly is designed specifically for Chevrolet Astro and GMC Safari models. This in-tank electric fuel pump module ensures consistent fuel delivery with integrated components tailored to your vehicle's requirements.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level readings\u003c\/li\u003e\n\u003cli\u003eNegative ground electrical system compatibility\u003c\/li\u003e\n\u003cli\u003eWhite male connector with blade-type terminals (4 terminals)\u003c\/li\u003e\n\u003cli\u003eExternal strainer inlet with quick connect outlet fitting\u003c\/li\u003e\n\u003cli\u003eIncludes gasket\/seal and fuel tank pressure sensor\u003c\/li\u003e\n\u003cli\u003eMinimum flow rating of 20.0 and minimum pressure of 62.0 psi\u003c\/li\u003e\n\u003cli\u003eSpecific fit for Chevrolet Astro and GMC Safari\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Airtex E3506M fuel pump module assembly is an electric pump designed for in-tank installation, providing reliable fuel delivery for Chevrolet Astro and GMC Safari vehicles. It includes a fuel sending unit for precise fuel level monitoring and a fuel tank pressure sensor to maintain optimal system performance. The module features a white male connector with four blade terminals, ensuring secure electrical connections with a negative ground system. The inlet uses an external strainer to protect the pump from debris, while the outlet employs a quick connect fitting for efficient fuel flow. This assembly comes with a gasket\/seal to ensure a proper fit and prevent leaks. The pump delivers a minimum flow rate of 20.0 gallons per hour and maintains a minimum pressure of 62 psi, meeting the regular grade type requirements for these specific vehicle models.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Astro fuel pump replacement\u003c\/li\u003e\n\u003cli\u003eGMC Safari fuel pump module upgrade\u003c\/li\u003e\n\u003cli\u003eResolving fuel delivery issues in Chevrolet Astro\u003c\/li\u003e\n\u003cli\u003eReplacing faulty fuel sending unit in GMC Safari\u003c\/li\u003e\n\u003cli\u003eAddressing fuel tank pressure sensor malfunctions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Airtex E3506M fuel pump module assembly requires removal of the fuel tank for in-tank access. Ensure the vehicle's battery is disconnected before beginning work to prevent electrical hazards. The included gasket\/seal must be properly seated to avoid fuel leaks. Since mounting hardware and lock ring are not included, reuse existing components or source compatible parts. Verify connector polarity and terminal connections match the vehicle's wiring harness. It is recommended to inspect the fuel tank and lines for contamination before installation to prolong pump life.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eAirtex fuel pump modules are manufactured to meet OEM specifications for fit, form, and function. The E3506M part number undergoes rigorous testing to ensure durability and reliable performance in Chevrolet Astro and GMC Safari vehicles. This product includes a gasket\/seal and fuel tank pressure sensor to maintain system integrity. Warranty coverage details should be confirmed with the point of purchase or manufacturer documentation.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384424497333,"sku":"HYVJ-E3506M","price":110.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E3506M_Fro_3d710de4-1cf8-49d0-b591-ec5fa089571c.jpg?v=1774702617"},{"product_id":"airtex-e7167m-fuel-pump-module-assembly","title":"Airtex E7167M Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Airtex Fuel Pump Module Assembly E7167M\u003c\/h2\u003e\u003cp\u003eThe Airtex Fuel Pump Module Assembly E7167M is designed specifically for Chrysler Sebring and Dodge Stratus models. This in-tank electric fuel pump module includes a fuel sending unit and is engineered to meet the exact specifications required for these vehicles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level readings\u003c\/li\u003e\n\u003cli\u003eNegative ground compatible for proper electrical connection\u003c\/li\u003e\n\u003cli\u003eOutlet outside diameter of 9.7 mm with quick connect outlet type\u003c\/li\u003e\n\u003cli\u003e300 mm wiring harness length with 20 gauge wire for reliable power delivery\u003c\/li\u003e\n\u003cli\u003eWhite oval connector with four blade terminals (male terminals, female connector)\u003c\/li\u003e\n\u003cli\u003ePlastic housing material with included gasket or seal for secure installation\u003c\/li\u003e\n\u003cli\u003eExternal strainer included to protect the pump from debris\u003c\/li\u003e\n\u003cli\u003eTop mount diameter of 158 mm designed for specific fitment\u003c\/li\u003e\n\u003cli\u003eIn-tank installation with one inlet port and one outlet port\u003c\/li\u003e\n\u003cli\u003eRegular grade type pump with a minimum flow rating of 25\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Airtex E7167M fuel pump module assembly is an electric pump designed for in-tank installation in Chrysler Sebring and Dodge Stratus vehicles. It features a fuel sending unit to provide accurate fuel level data to the vehicle’s gauge. The module uses a negative ground electrical system and includes a 300 mm wiring harness with 20 gauge wire, ensuring consistent electrical performance. The connector is white and oval-shaped with four blade terminals, designed for a secure and specific fit. The plastic housing is durable and comes with a gasket or seal to prevent leaks during installation. An external strainer is included to filter out contaminants before fuel reaches the pump, helping maintain fuel system integrity. The outlet has a quick connect type fitting with a 9.7 mm outside diameter, facilitating straightforward connection to the fuel line. This module is intended for specific fitment applications, matching the top mount diameter of 158 mm for Chrysler Sebring and Dodge Stratus models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Chrysler Sebring and Dodge Stratus\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate fuel level readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eAddresses fuel delivery interruptions caused by clogged strainers or worn pump components\u003c\/li\u003e\n\u003cli\u003eEliminates electrical connection problems with proper negative ground and connector design\u003c\/li\u003e\n\u003cli\u003ePrevents fuel leaks with included gasket or seal during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with Chrysler Sebring and Dodge Stratus before installation\u003c\/li\u003e\n\u003cli\u003eHandle the fuel sending unit carefully to avoid damage to the float mechanism\u003c\/li\u003e\n\u003cli\u003eVerify the wiring harness length and connector type match the vehicle’s existing setup\u003c\/li\u003e\n\u003cli\u003eUse the included gasket or seal to prevent fuel leaks at the mounting surface\u003c\/li\u003e\n\u003cli\u003eCheck the external strainer for debris and replace if necessary during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Airtex E7167M fuel pump module assembly is manufactured to meet OEM specifications for Chrysler and Dodge vehicles. It undergoes rigorous testing to ensure reliable fuel delivery and accurate fuel level readings. While specific warranty details may vary, Airtex products typically include a limited warranty covering defects in materials and workmanship. Refer to the product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384424988853,"sku":"HYVJ-E7167M","price":137.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E7167M_Fro_235a6123-e310-40b8-80ac-8370f592ee7f.jpg?v=1774702617"},{"product_id":"airtex-e7172m-fuel-pump-module-assembly","title":"Airtex E7172M Fuel Pump Module Assembly","description":"\u003ch2\u003eReliable Fuel Pump Module Assembly for Chrysler and Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Airtex E7172M fuel pump module assembly is designed specifically for Chrysler and Dodge models including Town \u0026amp; Country, Voyager, Caravan, and Grand Caravan. This in-tank electric fuel pump module ensures consistent fuel delivery with a 12V power supply and a flow rate of 20 gallons per hour, meeting the demands of your vehicle's fuel system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level readings\u003c\/li\u003e\n\u003cli\u003eNegative ground compatible for proper electrical grounding\u003c\/li\u003e\n\u003cli\u003eBlade-type terminals with four male connectors and an oval connector shape\u003c\/li\u003e\n\u003cli\u003eInternal strainer inlet and quick connect outlet for efficient fuel flow\u003c\/li\u003e\n\u003cli\u003ePom housing material for durability and resistance to fuel corrosion\u003c\/li\u003e\n\u003cli\u003eIncludes gasket and strainer for secure installation and filtration\u003c\/li\u003e\n\u003cli\u003eDesigned as a specific fit for Chrysler and Dodge minivans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Airtex E7172M fuel pump module assembly is engineered as a direct replacement part for select Chrysler and Dodge minivans, including Town \u0026amp; Country, Voyager, Caravan, and Grand Caravan models. This electric fuel pump operates at 12 volts and provides a minimum flow rating of 20 gallons per hour with a minimum pressure of 58 psi, ensuring stable fuel delivery under various driving conditions. The module includes a fuel sending unit for accurate fuel gauge readings but does not include a regulator or wiring harness. The housing is made from durable Pom material, which offers resistance to fuel and environmental factors. The assembly features blade-type terminals with four male connectors and an oval connector shape, facilitating a secure electrical connection. The internal strainer inlet and quick connect outlet design help maintain fuel cleanliness and ease of installation. A gasket and strainer are included to ensure a proper seal and filtration within the fuel tank.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement fuel pump module for Chrysler Town \u0026amp; Country models\u003c\/li\u003e\n\u003cli\u003eFuel pump assembly for Dodge Voyager minivans\u003c\/li\u003e\n\u003cli\u003eSuitable for Dodge Caravan and Grand Caravan fuel system repairs\u003c\/li\u003e\n\u003cli\u003eAddresses fuel delivery issues such as inconsistent fuel pressure or engine stalling\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate fuel gauge readings due to faulty sending units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Airtex E7172M fuel pump module assembly requires removal of the fuel tank to access the in-tank pump. Ensure the vehicle's battery is disconnected before beginning work to prevent electrical hazards. Since mounting hardware and wiring harness are not included, retain original components or source compatible parts as needed. Verify the gasket is properly seated to prevent fuel leaks. The blade-type terminals and oval connector shape require careful alignment during electrical connection. It is recommended to inspect the fuel tank and lines for contamination or damage during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eAirtex fuel pump modules are manufactured to meet OEM specifications for fit, form, and function. The E7172M part number undergoes rigorous testing to ensure reliable performance and durability in demanding automotive environments. This product includes a gasket and strainer to maintain fuel system integrity. While specific warranty details may vary, Airtex typically offers a limited warranty covering defects in materials and workmanship. Consult product documentation or the manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384425611445,"sku":"HYVJ-E7172M","price":117.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E7172M_Fro_3fb3f7f3-6c0a-41df-bf83-ab54cbe2542a.jpg?v=1774702617"},{"product_id":"airtex-e8119-electric-fuel-pump","title":"Airtex E8119 Electric Fuel Pump - In-Tank","description":"\u003ch2\u003eOverview of Airtex Electric Fuel Pump E8119 for Buick Park Avenue\u003c\/h2\u003e\u003cp\u003eThe Airtex E8119 electric fuel pump is designed specifically for the Buick Park Avenue, providing reliable in-tank fuel delivery. This 12-volt pump features a port-style inlet and a nipple outlet, engineered to meet the precise fuel flow and pressure requirements of your vehicle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric fuel pump with 12V operation\u003c\/li\u003e\n\u003cli\u003eIn-tank installation for Buick Park Avenue\u003c\/li\u003e\n\u003cli\u003eFuel pump inlet type: port with strainer\u003c\/li\u003e\n\u003cli\u003eOutlet type: single nipple with 5\/16 inch thread size\u003c\/li\u003e\n\u003cli\u003eMinimum flow rating of 21 gallons per hour\u003c\/li\u003e\n\u003cli\u003eMinimum pressure rating of 47.0 psi\u003c\/li\u003e\n\u003cli\u003eBlade terminal type with two male terminals\u003c\/li\u003e\n\u003cli\u003eConnector shape: square male connector\u003c\/li\u003e\n\u003cli\u003eIncludes gasket for secure sealing\u003c\/li\u003e\n\u003cli\u003eNegative ground compatible\u003c\/li\u003e\n\u003cli\u003eSpecific fitment for Buick Park Avenue\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description and Specifications\u003c\/h2\u003e\u003cp\u003eThe Airtex E8119 electric fuel pump is an internal, in-tank pump designed to deliver consistent fuel pressure and flow for the Buick Park Avenue. It operates on a 12-volt electrical system and features a port-style inlet with an integrated strainer to prevent debris from entering the fuel system. The pump’s outlet is a single nipple fitting with a 5\/16 inch thread size, ensuring a secure connection to the fuel line. This pump includes a gasket to maintain a proper seal during installation, but does not come with a regulator, mounting hardware, or wiring harness.\u003c\/p\u003e\u003cp\u003eWith two blade-type terminals and a square male connector, the E8119 is engineered for straightforward electrical connections. The pump supports a minimum flow rating of 21 gallons per hour and maintains a minimum pressure of 47 psi, meeting the fuel delivery demands of the Buick Park Avenue’s engine management system. This specific fit pump is designed to replace the factory unit without modification.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel pressure in Buick Park Avenue models experiencing fuel delivery issues\u003c\/li\u003e\n\u003cli\u003eReplaces failing or noisy electric fuel pumps\u003c\/li\u003e\n\u003cli\u003eAddresses engine hesitation or stalling caused by inadequate fuel supply\u003c\/li\u003e\n\u003cli\u003eSolves fuel pump inlet clogging due to integrated strainer design\u003c\/li\u003e\n\u003cli\u003eEliminates electrical connection problems with blade terminal and square connector design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle battery is disconnected before installation to prevent electrical hazards\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Buick Park Avenue model year before installation\u003c\/li\u003e\n\u003cli\u003eUse the included gasket to prevent fuel leaks and ensure a tight seal\u003c\/li\u003e\n\u003cli\u003eCheck fuel lines and connectors for wear or damage during replacement\u003c\/li\u003e\n\u003cli\u003eDo not reuse mounting hardware; secure pump firmly in the in-tank location\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eAirtex fuel pumps are manufactured to meet OEM specifications for fit, form, and function. The E8119 pump undergoes rigorous testing to ensure consistent fuel flow and pressure performance. While specific warranty details may vary, Airtex typically offers a limited warranty covering defects in materials and workmanship. Refer to the product packaging or manufacturer documentation for exact warranty terms.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384426528949,"sku":"HYVJ-E8119","price":58.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E8119_Fro_ed45485c-e849-4d5d-9f89-5dc710aa1233.jpg?v=1774702619"},{"product_id":"airtex-e8368m-fuel-pump-module-assembly","title":"Airtex E8368M Fuel Pump Module Assembly","description":"\u003ch2\u003eReliable Fuel Pump Module Assembly for Volkswagen and Audi\u003c\/h2\u003e\u003cp\u003eThe Airtex E8368M fuel pump module assembly is designed specifically for select Volkswagen Passat and Audi A6, including A6 Quattro models. This electric in-tank fuel pump ensures consistent fuel delivery with a 12-volt power supply and a flow rate of 32 gallons per hour, meeting the demands of regular grade fuel systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volkswagen Passat and Audi A6, A6 Quattro\u003c\/li\u003e\n\u003cli\u003eElectric in-tank fuel pump module assembly\u003c\/li\u003e\n\u003cli\u003e12-volt operation with 32 GPH flow rate\u003c\/li\u003e\n\u003cli\u003eIncludes external strainer and gasket for secure installation\u003c\/li\u003e\n\u003cli\u003ePin-type terminals with male connector, 2-terminal configuration\u003c\/li\u003e\n\u003cli\u003eOutlet hose connection with 1.0 inch outside diameter\u003c\/li\u003e\n\u003cli\u003eNegative ground system compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Features\u003c\/h2\u003e\u003cp\u003eThe Airtex E8368M fuel pump module assembly is engineered for specific fitment, ensuring proper integration with the fuel system of Volkswagen Passat and Audi A6 models. It features an electric pump type with a minimum flow rating of 32 gallons per hour, suitable for regular grade fuel. The module includes an external strainer inlet type to protect the pump from debris, and a gasket is included to maintain a secure seal during installation. The outlet is designed for hose connection with a 1.0 inch outside diameter, and the terminal type is pin with two terminals and a male connector gender. This module is designed for negative ground electrical systems and operates at 12 volts. Mounting hardware, fuel sending unit, regulator, lock ring, wiring harness, and fuel tank pressure sensor are not included with this assembly.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces faulty or failing fuel pump modules in Volkswagen Passat and Audi A6 vehicles\u003c\/li\u003e\n\u003cli\u003eAddresses fuel delivery issues such as engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eResolves low fuel pressure problems affecting engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents fuel pump noise caused by clogged or damaged strainers\u003c\/li\u003e\n\u003cli\u003eRestores proper fuel flow rate for consistent engine operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Airtex E8368M fuel pump module assembly requires removal of the fuel tank to access the in-tank pump. Ensure the gasket included is properly seated to prevent fuel leaks. Verify the negative ground system compatibility and confirm the pin-type terminals match the vehicle’s wiring harness. Since mounting hardware and wiring harness are not included, reuse existing components or source compatible parts separately. Handle the external strainer carefully to avoid damage during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAirtex fuel pump modules are manufactured to meet OEM specifications for fit, form, and function. The E8368M part number undergoes rigorous quality control to ensure reliable operation in Volkswagen Passat and Audi A6 vehicles. This product includes a gasket for installation integrity. Warranty coverage details should be confirmed with the distributor or retailer, as it may vary by region.\u003c\/p\u003e","brand":"Airtex","offers":[{"title":"Default Title","offer_id":43384427086005,"sku":"HYVJ-E8368M","price":79.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AF_E8368M_Fro_7167404c-f669-4c88-9a4b-389c59858718.jpg?v=1774702620"},{"product_id":"autobest-f1009a-fuel-pump-and-sender-assembly","title":"Autobest F1009A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eOverview of Autobest F1009A Fuel Pump and Sender Assembly\u003c\/h2\u003e\u003cp\u003eThe Autobest F1009A fuel pump and sender assembly is designed for reliable fuel delivery in Ford Cougar and Mercury Thunderbird vehicles. This in-tank performance-grade fuel pump offers consistent flow and pressure to support your vehicle's fuel system needs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 7.5 amps\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 36 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIn-tank installation with external strainer\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level readings\u003c\/li\u003e\n\u003cli\u003eConnector: 1 male elliptic connector\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 100 PSI; minimum pump pressure: 80 PSI\u003c\/li\u003e\n\u003cli\u003eOutlet size: 3\/8 inch quick connect\u003c\/li\u003e\n\u003cli\u003eIncludes NBR gasket\/seal for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1009A fuel pump and sender assembly is engineered to meet the fuel delivery requirements of Ford Cougar and Mercury Thunderbird models. This unit operates with an average current draw of 7.5 amps and delivers a steady flow rate of 36 GPH, ensuring efficient fuel supply under various driving conditions. The pump is designed for in-tank installation and features an external strainer inlet type measuring 0.889 inches, which helps protect the fuel system from contaminants.\u003c\/p\u003e\u003cp\u003eThe assembly includes a fuel sending unit, providing accurate fuel level data to the vehicle’s gauge. The connector is a single male elliptic type, facilitating straightforward electrical connections. The outlet is a 3\/8 inch quick connect, compatible with standard fuel lines. Additionally, the package includes an NBR gasket to ensure a proper seal and prevent leaks during installation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFord Cougar fuel pump replacement\u003c\/li\u003e\n\u003cli\u003eMercury Thunderbird fuel pump and sender assembly\u003c\/li\u003e\n\u003cli\u003eResolving fuel delivery issues such as low fuel pressure or inconsistent flow\u003c\/li\u003e\n\u003cli\u003eReplacing faulty fuel sending units causing inaccurate fuel gauge readings\u003c\/li\u003e\n\u003cli\u003eAddressing fuel pump failures that result in engine stalling or poor performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1009A is designed for in-tank installation with no special mounting hardware included. Ensure the fuel tank is properly drained and cleaned before installation. The external strainer should be inspected for debris and replaced if necessary. The elliptic male connector and quick connect outlet simplify electrical and fuel line connections, but verify compatibility with your vehicle’s wiring and fuel system. No specific installation warnings are provided, but standard safety precautions when working with fuel systems should be followed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis fuel pump and sender assembly is manufactured to performance-grade standards and is available to order. While specific warranty details are not provided, Autobest products typically undergo quality control to meet OEM specifications. The inclusion of a gasket and fuel sending unit ensures a comprehensive replacement part for your Ford Cougar or Mercury Thunderbird fuel system needs.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784271029,"sku":"FKDT-F1009A","price":81.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1009A_Fro.jpg?v=1774704973"},{"product_id":"autobest-f1011-electric-fuel-pump","title":"Autobest F1011 Electric Fuel Pump","description":"\u003ch2\u003eOverview of the Autobest Electric Fuel Pump F1011\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1011 is designed for reliable fuel delivery in select Ford, Lincoln, and Mercury vehicles. This external rollervane pump offers consistent flow and pressure, making it suitable for various models including the Ford F-150 and Mustang.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage flow rating of 23.78 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 94.27 PSI and minimum pressure of 72.52 PSI\u003c\/li\u003e\n\u003cli\u003eExternal rollervane pump type with external strainer\u003c\/li\u003e\n\u003cli\u003eTwo screw-type connectors and two threaded terminals for secure electrical connections\u003c\/li\u003e\n\u003cli\u003eInlet and outlet barb fittings sized 0.524 inches and 0.43 inches respectively\u003c\/li\u003e\n\u003cli\u003ePerformance grade pump designed for external installation\u003c\/li\u003e\n\u003cli\u003eIncludes pump and installation kit (gasket or seal not included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the Autobest Electric Fuel Pump Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump line focuses on performance-grade fuel pumps engineered for external mounting applications. The F1011 model exemplifies this with its rollervane pump design, providing steady fuel flow and pressure suitable for a range of Ford, Lincoln, and Mercury vehicles. This product line emphasizes durability and compatibility with common fuel system configurations, supporting vehicles that require reliable external fuel delivery solutions.\u003c\/p\u003e\u003ch2\u003eTechnical Description and Specifications\u003c\/h2\u003e\u003cp\u003eThe F1011 electric fuel pump operates with an average current draw of 4 amps, ensuring efficient power consumption. Its rollervane pump mechanism delivers a consistent flow rate of 23.78 GPH, maintaining fuel pressure between 72.52 and 94.27 PSI. The pump features two screw-type connectors and threaded terminals for secure electrical connections. Both inlet and outlet use barb fittings, sized 0.524 inches and 0.43 inches respectively, facilitating straightforward hose attachment. The external strainer helps protect the pump from debris, extending its service life. This pump is designed for external installation and does not include a regulator or gasket.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFord F-150, F-250, F-350 trucks\u003c\/li\u003e\n\u003cli\u003eFord Mustang and Bronco models\u003c\/li\u003e\n\u003cli\u003eLincoln Continental, Mark VII, and Town Car\u003c\/li\u003e\n\u003cli\u003eMercury Cougar, Capri, and Marquis\u003c\/li\u003e\n\u003cli\u003eFord Econoline series including E-150, E-250, and E-350\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis pump is suitable for addressing issues such as inconsistent fuel delivery, low fuel pressure, engine stalling, and poor acceleration in these vehicles.\u003c\/p\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned for external mounting; ensure proper orientation and secure mounting\u003c\/li\u003e\n\u003cli\u003eUse compatible fuel lines with 0.524 inch inlet and 0.43 inch outlet barb fittings\u003c\/li\u003e\n\u003cli\u003eCheck electrical connections for secure screw-type connectors and threaded terminals\u003c\/li\u003e\n\u003cli\u003eInstallation kit included; gasket or seal must be sourced separately if needed\u003c\/li\u003e\n\u003cli\u003eNo specific installation warnings provided, but follow vehicle manufacturer guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1011 is manufactured to meet performance standards for external fuel pumps. It is available to order and backed by Autobest's quality control processes. Warranty details should be confirmed with the distributor or vehicle manufacturer, as they may vary by application.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784303797,"sku":"FKDT-F1011","price":56.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1011_Fro.jpg?v=1774704973"},{"product_id":"autobest-f1012-electric-fuel-pump","title":"Autobest F1012 Electric Fuel Pump","description":"\u003ch2\u003eOverview of the Autobest Electric Fuel Pump F1012\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1012 is designed for reliable fuel delivery in select Ford, Mazda, and Mercury vehicles. This in-tank turbine pump offers consistent flow and pressure to support engine performance in models like the Ford Explorer and Mazda B2300.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage flow rating of 110 GPH for steady fuel supply\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 123.25 PSI and minimum of 79.8 PSI\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design with external strainer\u003c\/li\u003e\n\u003cli\u003eTwo male pin connectors for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford, Mazda, and Mercury models including Aerostar, Ranger, and Grand Marquis\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1012 operates with an average current draw of 6 amps, ensuring efficient power consumption. Its turbine pump type supports a flow rating of 110 gallons per hour, suitable for performance-grade applications. The pump features a 0.89-inch inlet with a filter type and a 0.36-inch male tube outlet with one barb, facilitating proper fuel flow and connection. The external strainer helps protect the pump from debris, enhancing durability. This pump is designed for in-tank installation and includes two male pin connectors for reliable electrical interfacing.\u003c\/p\u003e\u003ch2\u003eAbout the Autobest Electric Fuel Pump Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump line focuses on performance-grade fuel delivery components engineered for specific vehicle applications. The F1012 model exemplifies this with its turbine pump design and precise flow and pressure ratings, making it suitable for various Ford, Mazda, and Mercury vehicles. This product line emphasizes compatibility and durability without including additional components like regulators or gaskets.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel pressure in Ford Explorer and Mazda B2300 models\u003c\/li\u003e\n\u003cli\u003eReplaces failing or noisy in-tank fuel pumps in Mercury Grand Marquis and Ford Ranger\u003c\/li\u003e\n\u003cli\u003eAddresses fuel delivery issues causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eSupports performance upgrades requiring consistent fuel flow\u003c\/li\u003e\n\u003cli\u003eSolves electrical connection problems with secure male pin connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1012 is designed for in-tank installation with no special installation warnings. Ensure the external strainer is properly positioned to prevent debris intake. Verify connector gender and quantity—two male pin connectors—to match vehicle wiring harnesses. No gasket or seal is included, so use existing or appropriate replacement seals during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis electric fuel pump is manufactured in China and is available to order with a performance-grade classification. While no regulator or gasket is included, the pump meets specified flow and pressure ratings for reliable operation. Warranty details should be confirmed with the distributor or manufacturer to ensure coverage.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784402101,"sku":"FKDT-F1012","price":34.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1012_Fro.jpg?v=1774704973"},{"product_id":"autobest-f1013-electric-fuel-pump","title":"Autobest F1013 Electric Fuel Pump","description":"\u003ch2\u003eReliable Electric Fuel Pump for Ford, Mazda, and Mercury Vehicles\u003c\/h2\u003e\u003cp\u003eThe Autobest F1013 electric fuel pump is designed to deliver consistent fuel flow and pressure for select Ford, Mazda, and Mercury models. Engineered as an in-tank gerotor pump, it supports efficient fuel delivery for vehicles like the Ford Ranger and Mazda B2300.\u003c\/p\u003e\u003ch2\u003eKey Features of the Autobest F1013 Fuel Pump\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAverage flow rating of 27.74 gallons per hour (GPH) for steady fuel supply\u003c\/li\u003e\n\u003cli\u003eOperates at an average current draw of 6 amps\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 108.78 PSI and minimum pressure of 79.77 PSI\u003c\/li\u003e\n\u003cli\u003eIn-tank installation with internal strainer and filter inlet for fuel cleanliness\u003c\/li\u003e\n\u003cli\u003eTwo male pin connectors for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eGerotor pump type designed for performance applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Aerostar, Ranger, Mazda B2300, B3000, B4000, and Mercury Lynx, Navajo, Escort models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1013 electric fuel pump is a performance-grade, in-tank fuel pump engineered to meet the fuel delivery demands of mid-size trucks and SUVs from Ford, Mazda, and Mercury. Its gerotor design ensures smooth and reliable fuel flow, maintaining an average flow rate of 27.74 GPH while operating efficiently at 6 amps. The pump features an internal strainer and a filter-type inlet sized at 0.89 inches, which helps prevent contaminants from entering the fuel system. The outlet is a single male tube barb with a 0.36-inch diameter, facilitating straightforward fuel line connections. This pump is compatible with models such as the Ford Ranger and Mazda B2300, making it a suitable replacement for maintaining optimal engine performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel pressure in Ford Ranger and Mazda B2300 fuel systems\u003c\/li\u003e\n\u003cli\u003eResolves fuel delivery interruptions caused by worn or failing pumps\u003c\/li\u003e\n\u003cli\u003eEliminates engine stalling or hesitation due to inconsistent fuel flow\u003c\/li\u003e\n\u003cli\u003ePrevents fuel starvation in Mercury Lynx and Ford Aerostar vehicles\u003c\/li\u003e\n\u003cli\u003eSupports performance upgrades requiring reliable fuel supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1013 is designed for in-tank installation and includes an internal strainer but does not come with a gasket or seal. Ensure the fuel tank is clean before installation to avoid contamination. The pump uses two male pin connectors, so verify connector compatibility with your vehicle’s wiring harness. No special installation warnings are noted, but following manufacturer guidelines for fuel system servicing is recommended.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1013 fuel pump is available to order and meets performance-grade standards. While no regulator or gasket is included, the pump’s design supports reliable operation within specified pressure ranges. Warranty details should be confirmed with the distributor or retailer at the time of purchase.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784434869,"sku":"FKDT-F1013","price":35.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1013_Fro_6cecb5cb-1963-4766-aab3-1eb6c409c0bd.jpg?v=1774704974"},{"product_id":"autobest-f1026-electric-fuel-pump","title":"Autobest F1026 Electric Fuel Pump","description":"\u003ch2\u003eReliable Electric Fuel Pump for Ford and Mercury Vehicles\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1026 is designed to provide consistent fuel delivery for select Ford and Mercury models. Engineered for in-tank installation, this pump supports efficient fuel flow and pressure to maintain optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage flow rating of 120 GPH for steady fuel supply\u003c\/li\u003e\n\u003cli\u003eOperates at an average current draw of 2.8 amps\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 36.25 PSI and minimum pressure of 10.15 PSI\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design with a 0.531-inch strainer inlet\u003c\/li\u003e\n\u003cli\u003eIncludes gasket or seal for secure installation\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Escort, Lynx, Sable, Taurus, Tempo, and Mercury Topaz\u003c\/li\u003e\n\u003cli\u003ePart number F1026 for precise identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Electric Fuel Pump Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump line focuses on delivering reliable fuel delivery components tailored for specific vehicle applications. The Electric Fuel Pump F1026 is part of this line, offering a turbine-style pump designed for in-tank use, ensuring efficient fuel flow and pressure regulation without the need for an integrated regulator. This product line emphasizes compatibility and durability for air and fuel delivery systems.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe F1026 electric fuel pump features a turbine pump type that operates within a pressure range of 10.15 to 36.25 PSI, suitable for maintaining proper fuel system pressure in compatible vehicles. It draws an average current of 2.8 amps, balancing power consumption and performance. The pump includes a strainer inlet sized at 0.531 inches to filter debris before fuel enters the pump. The outlet is a single hose type with a 5\/16-inch diameter, facilitating straightforward connection to the fuel line. This pump is designed for negative ground systems and comes with two male chip terminals for electrical connections. The package includes the pump and a gasket or seal to ensure a secure and leak-free installation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement fuel pump for Ford Escort and Lynx models\u003c\/li\u003e\n\u003cli\u003eSuitable for Mercury Sable and Taurus fuel system maintenance\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Tempo and Mercury Topaz fuel delivery repairs\u003c\/li\u003e\n\u003cli\u003eIdeal for resolving fuel delivery issues such as low fuel pressure or inconsistent engine performance\u003c\/li\u003e\n\u003cli\u003eUsed to restore proper fuel flow in vehicles experiencing pump failure or wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1026 is designed for in-tank installation, simplifying replacement without extensive modifications. No special installation warnings are noted, but it is recommended to verify vehicle compatibility before installation. The included gasket or seal should be properly seated to prevent leaks. Ensure electrical connections match the two male chip terminals provided. Proper grounding and secure hose connections are essential for optimal operation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Availability\u003c\/h2\u003e\u003cp\u003eThis electric fuel pump is manufactured in China and is currently available to order. While no specific warranty information is provided, Autobest products typically meet industry standards for quality and reliability. The pump is packaged securely with dimensions suitable for safe handling and storage.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784500405,"sku":"FKDT-F1026","price":38.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1026_Fro.jpg?v=1774704974"},{"product_id":"autobest-f1055-electric-fuel-pump","title":"Autobest F1055 Electric Fuel Pump","description":"\u003ch2\u003eOverview of the Autobest Electric Fuel Pump F1055\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1055 is designed for reliable fuel delivery in select Ford, Lincoln, and Mercury vehicles. This in-tank turbine pump offers consistent flow and pressure to support engine performance in models like the Crown Victoria, Town Car, and Thunderbird.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage flow rating of 150 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eAverage current draw of 8 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design with internal strainer included\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 123.25 PSI and minimum pressure of 79.8 PSI\u003c\/li\u003e\n\u003cli\u003eTwo male pin connectors for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Cougar, Lincoln Mark VII, Mercury Grand Marquis, and more\u003c\/li\u003e\n\u003cli\u003eInlet size of 0.89 inches with filter inlet type and 0.36-inch barb outlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Electric Fuel Pump Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump product line focuses on performance-grade fuel pumps engineered for durability and consistent fuel delivery. The F1055 model exemplifies this line by providing a turbine pump design that integrates an internal strainer to protect the fuel system. This product line is tailored for in-tank installation, ensuring compatibility with a range of Ford, Lincoln, and Mercury vehicles requiring reliable fuel supply under varying operating conditions.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1055 electric fuel pump is an in-tank turbine pump engineered to maintain steady fuel flow and pressure for optimal engine function. With an average flow rating of 150 GPH and a current draw of 8 amps, it balances performance and efficiency. The pump features two male pin connectors for secure electrical connections and includes an internal strainer to prevent contaminants from entering the fuel system. Its inlet size of 0.89 inches with a filter inlet type and a 0.36-inch barb outlet ensure proper fuel delivery. The pump operates within a pressure range of 79.8 to 123.25 PSI, suitable for various fuel system requirements in compatible vehicles.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement fuel pump for Ford Crown Victoria and Town Car models\u003c\/li\u003e\n\u003cli\u003eSuitable for Lincoln Mark VII and Mercury Grand Marquis fuel system maintenance\u003c\/li\u003e\n\u003cli\u003eUsed in Ford Thunderbird and Cougar for consistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eApplicable for Mercury Topaz and Ford Tempo fuel pump replacement\u003c\/li\u003e\n\u003cli\u003eSupports fuel system reliability in Ford Windstar and Lincoln Town Car\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1055 electric fuel pump is designed for in-tank installation with no special installation warnings. Ensure the electrical connectors match the male pin configuration and verify the inlet and outlet sizes for compatibility with your vehicle’s fuel lines. Since the pump does not include a gasket or seal, use the existing or appropriate replacement seals during installation to prevent leaks. Proper handling of the internal strainer is recommended to avoid damage during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis electric fuel pump is manufactured to meet performance-grade standards and is available to order with assured quality. While no specific warranty information is provided, Autobest products typically adhere to industry quality controls to ensure durability and reliable operation in compatible Ford, Lincoln, and Mercury vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784631477,"sku":"FKDT-F1055","price":32.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1055_Fro.jpg?v=1774704975"},{"product_id":"autobest-f1060a-fuel-pump-and-strainer-set","title":"Autobest F1060A Fuel Pump and Strainer Set","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Strainer Set F1060A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Strainer Set F1060A is designed for reliable fuel delivery in select Ford and Mercury vehicles. This in-tank turbine pump offers consistent flow and pressure to support engine performance in models like the Ford F-150 and Mercury Mountaineer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 7 amps\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 135 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 21.76 PSI\u003c\/li\u003e\n\u003cli\u003eMinimum pump pressure: 7.25 PSI\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump with strainer inlet type\u003c\/li\u003e\n\u003cli\u003eIncludes NBR gasket\/seal for secure installation\u003c\/li\u003e\n\u003cli\u003eHousing made from durable POM material\u003c\/li\u003e\n\u003cli\u003eNegative ground electrical system compatible\u003c\/li\u003e\n\u003cli\u003eOutlet size: 0.314 inches with metallic conduit\u003c\/li\u003e\n\u003cli\u003ePackage includes pump and installation kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Fuel Pump and Strainer Set Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Strainer Set product line focuses on performance-grade fuel delivery components designed to meet or exceed OEM specifications. This line emphasizes durability and consistent fuel flow, making it suitable for vehicles requiring reliable in-tank fuel pumps. The F1060A model is part of this line, engineered to provide steady pressure and flow rates for Ford and Mercury trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1060A fuel pump and strainer set from Autobest is engineered as an in-tank turbine pump, delivering an average flow of 135 GPH with a current draw of 7 amps. It operates within a pressure range of 7.25 to 21.76 PSI, ensuring stable fuel supply under various driving conditions. The pump housing is constructed from POM, a material known for its strength and resistance to fuel corrosion. The included NBR gasket or seal helps maintain a secure and leak-free installation. This pump features a single outlet with a metallic conduit and a 0.314-inch outlet size, designed for compatibility with the fuel systems of Ford Bronco, F-150, E-150 Econoline, and Mercury Mountaineer models among others.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFord Bronco and Bronco II\u003c\/li\u003e\n\u003cli\u003eFord E-150, E-250, and E-350 Econoline (including Club Wagon variants)\u003c\/li\u003e\n\u003cli\u003eFord Explorer, F-150, F-250, F-250 HD, and F-350\u003c\/li\u003e\n\u003cli\u003eMercury Mountaineer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis fuel pump and strainer set is typically used to address issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent or weak fuel delivery causing engine hesitation\u003c\/li\u003e\n\u003cli\u003eFuel pump failure resulting in no-start conditions\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure affecting engine performance\u003c\/li\u003e\n\u003cli\u003eFuel system contamination due to damaged or clogged strainers\u003c\/li\u003e\n\u003cli\u003eElectrical issues related to pump current draw or grounding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1060A is designed for in-tank installation and includes a gasket\/seal made from NBR material to ensure a proper seal. No additional fuel filter, sending unit, or pressure sensor is included, so verify compatibility with your vehicle’s existing components. The pump supports negative ground electrical systems and requires connection to a metallic conduit outlet. Installation should be performed with care to avoid damage to the strainer inlet and to ensure secure electrical connections. No specific installation warnings are noted for this part.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Strainer Set F1060A is manufactured to meet performance-grade standards and is available to order with quality assurance from the brand. While specific warranty details are not provided, Autobest products typically undergo rigorous testing to ensure durability and reliable operation in compatible Ford and Mercury vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784664245,"sku":"FKDT-F1060A","price":59.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1060A_Fro.jpg?v=1774704975"},{"product_id":"autobest-f1072-electric-fuel-pump","title":"Autobest F1072 Electric Fuel Pump","description":"\u003ch2\u003eReliable Electric Fuel Pump for Ford and Mercury Vehicles\u003c\/h2\u003e\u003cp\u003eThe Autobest F1072 electric fuel pump is designed to deliver consistent fuel flow and pressure for Ford Capri and Mustang models. Engineered as an in-tank turbine pump, it supports performance applications requiring steady fuel delivery.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage flow rating of 27.74 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eOperating current draw of 6 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 101.53 PSI and minimum pressure of 79.77 PSI\u003c\/li\u003e\n\u003cli\u003eMale pin connectors with two connection points for secure wiring\u003c\/li\u003e\n\u003cli\u003eExternal strainer with 0.89-inch inlet size featuring a filter type inlet\u003c\/li\u003e\n\u003cli\u003eSingle outlet with 0.36-inch male tube barb fitting\u003c\/li\u003e\n\u003cli\u003eCompact dimensions: 5.039 inches length, 1.445 inches width and height\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation without included gasket or seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Overview of the Autobest F1072 Fuel Pump\u003c\/h2\u003e\u003cp\u003eThe Autobest F1072 is a turbine-style electric fuel pump manufactured in China, optimized for performance-grade applications. Its design includes an external strainer to protect the pump from debris, ensuring longevity and consistent operation. The pump’s electrical connectors are male pin types, with two connectors to facilitate proper wiring. It operates at an average current draw of 6 amps, balancing power efficiency with reliable fuel delivery. The pump supports a flow rate of 27.74 GPH, suitable for the fuel demands of Ford Capri and Mustang engines. The pressure range between 79.77 PSI minimum and 101.53 PSI maximum ensures stable fuel supply under various driving conditions.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis electric fuel pump is compatible with select Ford and Mercury vehicles, specifically the Ford Capri and Mustang models. It is intended for use as a replacement or upgrade pump in these vehicles, particularly where a performance-grade in-tank pump is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eResolves fuel delivery issues such as inconsistent fuel pressure\u003c\/li\u003e\n\u003cli\u003eAddresses engine hesitation or stalling caused by fuel starvation\u003c\/li\u003e\n\u003cli\u003eReplaces worn or failing factory fuel pumps in Ford Capri and Mustang\u003c\/li\u003e\n\u003cli\u003eSupports performance upgrades requiring higher flow rates\u003c\/li\u003e\n\u003cli\u003eEliminates fuel pump noise associated with aging components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1072 pump is designed for in-tank installation and does not include a gasket or seal, so ensure proper sealing during installation. The pump features male pin connectors and a single outlet with a 0.36-inch barb fitting, compatible with standard fuel lines. No special installation warnings are noted, but it is recommended to verify electrical connections and fuel line fittings for secure attachment. Due to its external strainer design, ensure the strainer is properly positioned to prevent debris ingress.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eManufactured to meet performance-grade standards, the Autobest F1072 fuel pump is available to order and backed by quality control processes. While specific warranty details are not provided, Autobest products typically adhere to industry standards for durability and reliability. Confirm warranty coverage with the point of purchase or manufacturer documentation.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784697013,"sku":"FKDT-F1072","price":38.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1072_Fro.jpg?v=1774704976"},{"product_id":"autobest-f1075a-fuel-pump-and-strainer-set","title":"Autobest F1075A Fuel Pump and Strainer Set","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Strainer Set F1075A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Strainer Set F1075A is designed for reliable fuel delivery in Ford trucks, including the F-150, F-250, F-250 HD, and F-350 models. This in-tank turbine pump offers consistent flow and pressure to support engine performance under various driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 7 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 135 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 21.76 PSI and minimum pressure of 7.25 PSI\u003c\/li\u003e\n\u003cli\u003eIncludes a NBR gasket or seal for secure installation\u003c\/li\u003e\n\u003cli\u003eConstructed with a durable POM housing material\u003c\/li\u003e\n\u003cli\u003eInternal strainer inlet type with a 0.7-inch inlet size\u003c\/li\u003e\n\u003cli\u003eSingle outlet with a 0.311-inch metallic conduit\u003c\/li\u003e\n\u003cli\u003eNegative ground compatible\u003c\/li\u003e\n\u003cli\u003ePerformance grade pump type: turbine\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Fuel Pump and Strainer Set Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Strainer Set product line focuses on delivering performance-grade fuel pumps designed for in-tank installation. This line emphasizes durability and consistent fuel flow, making it suitable for demanding applications such as Ford trucks. The F1075A model includes both the pump and necessary gasket kit, ensuring a complete solution for fuel delivery system maintenance or upgrades.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1075A fuel pump and strainer set from Autobest is engineered to meet the fuel delivery requirements of Ford F-150, F-250, F-250 HD, and F-350 trucks. Featuring a turbine pump type, it provides a steady flow rate of 135 GPH with a pressure range between 7.25 and 21.76 PSI. The pump operates at an average current draw of 7 amps, balancing power consumption and performance. Its POM housing material offers resistance to fuel and environmental factors, while the internal strainer protects the pump from debris. The included NBR gasket ensures a proper seal during installation. This pump is designed for negative ground electrical systems and features a metallic conduit outlet for secure fuel line connection.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring fuel delivery in Ford F-150, F-250, F-250 HD, and F-350 trucks\u003c\/li\u003e\n\u003cli\u003eReplacing worn or failing in-tank fuel pumps causing low fuel pressure\u003c\/li\u003e\n\u003cli\u003eResolving inconsistent engine performance due to fuel starvation\u003c\/li\u003e\n\u003cli\u003eAddressing fuel pump noise or electrical issues related to current draw\u003c\/li\u003e\n\u003cli\u003eUpgrading to a performance-grade pump for improved fuel flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1075A fuel pump and strainer set is designed for in-tank installation with no special warnings. Ensure the fuel tank is properly drained and cleaned before installation. Use the included NBR gasket to achieve a secure seal and prevent leaks. Verify compatibility with your Ford truck model and follow manufacturer torque specifications when securing the pump assembly. Electrical connections should be checked for proper negative ground configuration.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis fuel pump and strainer set is manufactured to meet performance standards suitable for Ford trucks. The product is available to order and includes a gasket kit for installation. While specific warranty details are not provided, Autobest products typically adhere to industry quality controls to ensure reliability and durability in automotive fuel delivery systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784729781,"sku":"FKDT-F1075A","price":58.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1075A_Fro.jpg?v=1774704976"},{"product_id":"autobest-f1076-electric-fuel-pump","title":"Autobest F1076 Electric Fuel Pump","description":"\u003ch2\u003eOverview of the Autobest Electric Fuel Pump F1076\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1076 is designed for reliable fuel delivery in select Ford and Mercury vehicles. Engineered as an in-tank turbine pump, it supports consistent fuel flow and pressure for models like the Ford Escort, Tempo, Topaz, and Mercury Tracer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage flow rating of 110 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eAverage current draw of 6 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 123.25 PSI and minimum pressure of 79.8 PSI\u003c\/li\u003e\n\u003cli\u003eMale pin connectors with two connection points\u003c\/li\u003e\n\u003cli\u003eExternal strainer with a 0.89-inch inlet size and filter inlet type\u003c\/li\u003e\n\u003cli\u003eCompact dimensions: 5.04 inches length, 1.44 inches width and height\u003c\/li\u003e\n\u003cli\u003eDesigned as an in-tank turbine pump without included regulator or gasket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Electric Fuel Pump Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump line focuses on performance-grade fuel pumps engineered for durability and consistent fuel delivery. The F1076 model exemplifies this line by providing a turbine-style pump optimized for in-tank installation, ensuring steady fuel pressure and flow rates suitable for specific Ford and Mercury vehicles. This product line emphasizes compatibility and reliable operation under typical driving conditions.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1076 is a performance-grade, in-tank turbine pump designed to maintain optimal fuel delivery for Ford Escort, Tempo, Topaz, and Mercury Tracer models. It features a 110 GPH flow rating and operates at an average current draw of 6 amps, balancing power consumption and fuel supply efficiency. The pump’s pressure range from 79.8 PSI minimum to 123.25 PSI maximum ensures consistent fuel pressure to the engine. Equipped with male pin connectors and an external strainer, this pump supports clean fuel intake and secure electrical connections. Its compact size facilitates straightforward installation within the fuel tank without requiring additional gaskets or regulators.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel pressure in Ford Escort and Mercury Tracer vehicles\u003c\/li\u003e\n\u003cli\u003eResolves fuel delivery interruptions causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eReplaces worn or failing in-tank fuel pumps in Tempo and Topaz models\u003c\/li\u003e\n\u003cli\u003eImproves fuel flow consistency for smoother engine performance\u003c\/li\u003e\n\u003cli\u003eAddresses electrical connector compatibility with male pin terminals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe F1076 pump is designed for in-tank installation and includes male pin connectors with two connection points. No gasket or seal is included, so ensure the existing seal is inspected or replaced as needed. The external strainer should be checked for debris before installation to maintain fuel system cleanliness. No special installation warnings are noted, but proper handling of electrical connections and secure mounting within the fuel tank are recommended for optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1076 is manufactured to meet performance-grade standards and is available to order with consistent quality control. While no specific warranty details are provided, Autobest products typically adhere to industry standards for durability and reliability in automotive fuel delivery components.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784795317,"sku":"FKDT-F1076","price":33.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1076_Fro_21e7ed18-3b1a-447f-8547-eab05ac6e643.jpg?v=1774704976"},{"product_id":"autobest-f1078-electric-fuel-pump","title":"Autobest F1078 Electric Fuel Pump","description":"\u003ch2\u003eOverview of the Autobest F1078 Electric Fuel Pump\u003c\/h2\u003e\u003cp\u003eThe Autobest F1078 electric fuel pump is designed for reliable fuel delivery in select Mercury and Nissan vehicles. Engineered as an in-tank turbine pump, it supports consistent fuel flow and pressure for optimal engine performance in the Mercury Villager and Nissan Quest models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage flow rating of 110 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eAverage current draw of 6 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 123.25 PSI and minimum pressure of 79.8 PSI\u003c\/li\u003e\n\u003cli\u003eTwo male pin connectors for secure electrical connections\u003c\/li\u003e\n\u003cli\u003eExternal strainer with a 0.89-inch inlet size featuring a filter\u003c\/li\u003e\n\u003cli\u003eSingle male tube outlet with 0.36-inch barb size\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design for consistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eCompatible with Mercury Villager and Nissan Quest vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1078 electric fuel pump operates as a turbine-type pump installed inside the fuel tank. It features an external strainer to protect the pump from debris, ensuring longevity and steady fuel flow. The pump’s electrical connectors are male pins, with two connectors to maintain a stable power supply. Its average current draw is 6 amps, balancing power consumption and performance. The pump delivers fuel at an average flow rate of 110 GPH, maintaining pressures between 79.8 and 123.25 PSI, suitable for the fuel system requirements of the Mercury Villager and Nissan Quest.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis electric fuel pump is specifically compatible with the following vehicles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMercury Villager\u003c\/li\u003e\n\u003cli\u003eNissan Quest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed to replace the original in-tank fuel pump in these models, ensuring proper fuel delivery and engine operation.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the Autobest F1078 Fuel Pump\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFuel delivery interruptions causing engine stalling or hesitation\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure affecting engine performance\u003c\/li\u003e\n\u003cli\u003eElectrical connector failures leading to pump inoperability\u003c\/li\u003e\n\u003cli\u003eContaminant buildup causing pump strain or failure\u003c\/li\u003e\n\u003cli\u003eWear and tear from prolonged use in Mercury Villager and Nissan Quest vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1078 is an in-tank electric fuel pump designed for direct replacement. It does not include a gasket or seal, so ensure the existing seal is inspected or replaced during installation. The pump features male pin connectors and a single outlet barb, so verify compatibility with your vehicle’s fuel lines and wiring harness. No special installation warnings are noted, but standard safety precautions when working with fuel systems should be followed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest F1078 fuel pump is manufactured to meet performance standards suitable for Mercury Villager and Nissan Quest applications. It is currently available to order and backed by Autobest’s quality control processes. While no specific warranty details are provided, Autobest products typically come with manufacturer coverage; verify warranty terms at the point of purchase.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784828085,"sku":"FKDT-F1078","price":31.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1078_Fro.jpg?v=1774704977"},{"product_id":"autobest-f1087a-fuel-pump-and-sender-assembly","title":"Autobest F1087A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Sender Assembly F1087A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1087A is designed for reliable fuel delivery in select Dodge, Ford, and Mercury vehicles. This in-tank fuel pump assembly combines a fuel pump and sending unit to ensure accurate fuel level readings and consistent fuel flow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 5 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating: 36 gallons per hour (GPH) to meet performance demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eIn-tank design with external strainer inlet type (0.889 inch)\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet (3\/8 inch) with one elliptic male connector\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 100 PSI; minimum pump pressure: 80 PSI\u003c\/li\u003e\n\u003cli\u003eCompatible with Dodge B100, B200, B300, D100, D150, D200, D300, Ramcharger; Ford W100, W150, W200, W300, W350; Mercury Sable and Taurus models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Fuel Pump and Sender Assembly Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly product line integrates fuel delivery and fuel level sensing components into a single unit. This design simplifies installation and maintenance by combining the pump and sending unit, ensuring compatibility and reliable operation within the fuel tank. The F1087A model adheres to performance-grade standards, providing consistent fuel pressure and flow for the specified vehicle applications.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1087A fuel pump and sender assembly operates with an average current draw of 5 amps, delivering a steady fuel flow rate of 36 GPH. Its in-tank configuration includes an external strainer inlet sized at 0.889 inches, which helps protect the pump from debris. The assembly features a single elliptic male connector and a quick connect outlet of 3\/8 inch diameter, facilitating straightforward electrical and fuel line connections. The included fuel sending unit provides accurate fuel level readings, while the NBR gasket ensures a secure seal to prevent leaks. This assembly is engineered to maintain fuel pressure between 80 and 100 PSI, supporting optimal engine performance in compatible Dodge, Ford, and Mercury models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Dodge B-series trucks and Ramcharger\u003c\/li\u003e\n\u003cli\u003eRestores accurate fuel level readings in Ford W-series trucks and Mercury sedans\u003c\/li\u003e\n\u003cli\u003eResolves fuel delivery interruptions caused by clogged or damaged pump components\u003c\/li\u003e\n\u003cli\u003eAddresses fuel pressure inconsistencies affecting engine performance\u003c\/li\u003e\n\u003cli\u003eSuitable for vehicles experiencing fuel sender unit malfunctions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned for in-tank installation; ensure proper handling to avoid damage\u003c\/li\u003e\n\u003cli\u003eVerify connector compatibility with vehicle wiring harness (elliptic male connector)\u003c\/li\u003e\n\u003cli\u003eUse included NBR gasket to maintain a proper seal and prevent leaks\u003c\/li\u003e\n\u003cli\u003eNo mounting hardware included; reuse existing hardware or source separately\u003c\/li\u003e\n\u003cli\u003eFollow vehicle-specific service manual instructions for fuel system safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1087A is manufactured to meet performance-grade standards and is available to order with quality assurance from the brand. While specific warranty details are not provided, Autobest products typically undergo rigorous testing to ensure durability and reliable operation in compatible Dodge, Ford, and Mercury vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784926389,"sku":"FKDT-F1087A","price":82.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1087A_Fro.jpg?v=1774704977"},{"product_id":"autobest-f1108a-fuel-pump-module-assembly","title":"Autobest F1108A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1108A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1108A is designed specifically for Ford Escort and Mercury Tracer models. This in-tank fuel pump module ensures reliable fuel delivery with a performance-grade design tailored to meet the demands of these vehicles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 8 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 37 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eExternal and internal strainers for enhanced fuel filtration\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum of 80 PSI\u003c\/li\u003e\n\u003cli\u003eRectangular male\/female connectors with three connection points\u003c\/li\u003e\n\u003cli\u003eConstructed with durable POM housing material\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet with 3\/8 inch size for easy installation\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Escort and Mercury Tracer fuel systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1108A fuel pump module assembly is engineered as an in-tank unit, providing consistent fuel pressure between 80 and 100 PSI to support optimal engine performance. Its 37 GPH flow rating ensures sufficient fuel delivery for the Ford Escort and Mercury Tracer models it is compatible with. The module includes a fuel sending unit and a NBR gasket to maintain a secure seal and accurate fuel level readings. Featuring both internal and external strainers, this assembly helps protect the fuel system from contaminants. The pump’s POM housing material offers durability and resistance to fuel corrosion. The rectangular male\/female connectors with three connection points simplify electrical connections, while the quick connect 3\/8 inch outlet facilitates straightforward fuel line attachment.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces failing or noisy fuel pumps in Ford Escort and Mercury Tracer vehicles\u003c\/li\u003e\n\u003cli\u003eResolves inconsistent fuel pressure issues causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eAddresses inaccurate fuel level readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eEliminates fuel delivery interruptions caused by clogged or damaged strainers\u003c\/li\u003e\n\u003cli\u003eRestores proper fuel system operation after pump module wear or damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1108A fuel pump module assembly is designed for direct replacement in compatible Ford Escort and Mercury Tracer models. No special installation warnings are noted, but it is recommended to relieve fuel system pressure before removal. Ensure all electrical connectors are securely attached and the NBR gasket is properly seated to prevent leaks. Since mounting hardware is not included, reuse existing hardware or source appropriate fasteners. Verify fuel line connections with the quick connect outlet for a secure fit.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1108A fuel pump module assembly meets performance-grade standards for durability and reliability. The product is available to order and includes a fuel sending unit and gasket to support proper function. Warranty details should be confirmed with the distributor or retailer, as they may vary.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385784991925,"sku":"FKDT-F1108A","price":105.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1108A_Fro.jpg?v=1774704978"},{"product_id":"autobest-f1109a-fuel-pump-module-assembly","title":"Autobest F1109A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1109A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1109A is designed for reliable fuel delivery in Ford Taurus and Mercury Sable vehicles. This in-tank fuel pump module ensures consistent fuel flow and pressure to support engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 6 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 29 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Taurus and Mercury Sable models\u003c\/li\u003e\n\u003cli\u003eInlet strainer with both internal and external filtration\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum of 80 PSI\u003c\/li\u003e\n\u003cli\u003eConnector configuration: 2 connectors, male and female, with rectangle and round shapes\u003c\/li\u003e\n\u003cli\u003eOutlet quick connect fitting sized at 3\/8 inch\u003c\/li\u003e\n\u003cli\u003eDurable POM housing material for long-lasting use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1109A fuel pump module assembly is engineered as an in-tank unit, providing a steady fuel supply to the engine. It features a dual strainer system with both internal and external strainers to protect the fuel system from contaminants. The module includes a fuel sending unit for accurate fuel level readings and an NBR gasket to ensure a secure seal within the fuel tank. Designed with a POM housing, this module offers durability and resistance to fuel corrosion. The pump operates within a pressure range of 80 to 100 PSI, delivering a flow rate of 29 GPH while drawing an average current of 6 amps. The connector setup includes two connectors with male and female ends, shaped in rectangle and round forms for proper fitment. This assembly is compatible specifically with Ford Taurus and Mercury Sable models, making it a suitable replacement part for these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel delivery in Ford Taurus and Mercury Sable vehicles\u003c\/li\u003e\n\u003cli\u003eResolves fuel level sending unit malfunctions\u003c\/li\u003e\n\u003cli\u003eEliminates fuel pump pressure inconsistencies\u003c\/li\u003e\n\u003cli\u003ePrevents fuel contamination with dual strainer filtration\u003c\/li\u003e\n\u003cli\u003eAddresses fuel pump failure due to worn or damaged components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is designed for in-tank installation and does not include mounting hardware, so ensure existing hardware is in good condition or replaced as needed. No special installation warnings are noted, but it is recommended to relieve fuel system pressure before removal. The quick connect outlet fitting simplifies hose connections. Verify connector gender and shape compatibility with the vehicle wiring harness before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest F1109A fuel pump module assembly is manufactured to meet performance-grade standards. It includes a fuel sending unit and NBR gasket to maintain system integrity. This product is available to order and backed by Autobest's quality control processes. Warranty details should be confirmed with the distributor or installer.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385785024693,"sku":"FKDT-F1109A","price":98.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1109A_Fro.jpg?v=1774704978"},{"product_id":"autobest-f1112a-fuel-pump-and-sender-assembly","title":"Autobest F1112A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Sender Assembly F1112A\u003c\/h2\u003e\u003cp\u003eThe Autobest F1112A fuel pump and sender assembly is designed specifically for Ford Tempo and Mercury Topaz vehicles. This in-tank fuel pump offers reliable fuel delivery performance with a focus on compatibility and durability for these models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 7 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 38 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eElliptic male connector with one quick connect outlet\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum of 80 PSI\u003c\/li\u003e\n\u003cli\u003eExternal strainer inlet type with 0.889 inch inlet size\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation, compatible with Ford Tempo and Mercury Topaz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1112A fuel pump and sender assembly is engineered to meet the fuel delivery requirements of Ford Tempo and Mercury Topaz vehicles. This performance-grade pump operates with an average current draw of 7 amps and delivers a consistent flow rate of 38 GPH, ensuring steady fuel supply under various driving conditions. The assembly includes a fuel sending unit for accurate fuel level readings and a NBR gasket to maintain a secure seal within the fuel tank. Featuring an elliptic male connector and a single quick connect outlet sized at 3\/8 inch, this pump is designed for straightforward integration with the vehicle's fuel system. The external strainer inlet helps protect the pump from debris, contributing to longer service life. With a maximum pump pressure of 100 PSI and a minimum of 80 PSI, the F1112A maintains optimal fuel pressure for engine performance.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFord Tempo fuel pump replacement\u003c\/li\u003e\n\u003cli\u003eMercury Topaz fuel pump and sender assembly upgrade\u003c\/li\u003e\n\u003cli\u003eReplacement for in-tank fuel pump issues in Ford Tempo\u003c\/li\u003e\n\u003cli\u003eFuel delivery system repair for Mercury Topaz\u003c\/li\u003e\n\u003cli\u003eAddressing fuel sending unit malfunctions in compatible models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1112A is designed for in-tank installation and does not include mounting hardware, so ensure existing hardware is in good condition or replaced as needed. The elliptic male connector and quick connect outlet simplify electrical and fuel line connections. No special installation warnings are noted, but it is recommended to follow vehicle-specific service manuals for safe removal and installation procedures. Verify gasket seating to prevent fuel leaks and confirm proper orientation of the fuel sending unit for accurate fuel level readings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1112A fuel pump and sender assembly is classified as a performance-grade component. It is available to order and meets industry standards for fuel delivery components. The product includes a NBR gasket to ensure a reliable seal. Warranty details should be confirmed with the distributor or retailer, as they may vary by source.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788235957,"sku":"FKDT-F1112A","price":90.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1112A_Fro.jpg?v=1774704979"},{"product_id":"autobest-f1114a-fuel-pump-and-sender-assembly","title":"Autobest F1114A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Sender Assembly F1114A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1114A is designed for reliable fuel delivery in Ford trucks, including the F-150, F-250, and F-350 models. This in-tank fuel pump assembly combines a fuel pump and sending unit to ensure accurate fuel level readings and consistent fuel flow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 2.5 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 46 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for secure sealing\u003c\/li\u003e\n\u003cli\u003eElliptic male connector with one quick connect outlet\u003c\/li\u003e\n\u003cli\u003eIn-tank design with external strainer inlet type\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford F-150, F-250, and F-350 trucks\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 10 PSI and minimum of 2 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Fuel Pump and Sender Assembly Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly product line integrates both the fuel pump and fuel level sending unit into a single assembly. This design simplifies installation and ensures compatibility between components. The F1114A model is part of this performance-grade line, engineered to meet the fuel delivery demands of Ford trucks while maintaining accurate fuel level monitoring.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1114A fuel pump assembly operates with an average current draw of 2.5 amps and delivers a fuel flow rate of 46 GPH, suitable for maintaining optimal engine performance in Ford F-150, F-250, and F-350 vehicles. It features a male elliptic connector and a single quick connect outlet sized at 3\/8 inch for secure fuel line attachment. The pump is designed for in-tank installation and includes an external strainer inlet sized at 0.748 inches to filter debris before fuel enters the pump. The assembly comes with a NBR gasket to ensure a proper seal and prevent leaks. Note that the fuel filter and fuel tank pressure sensor are not included in this assembly.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of faulty or failing fuel pumps in Ford F-150, F-250, and F-350 trucks\u003c\/li\u003e\n\u003cli\u003eResolving inconsistent fuel level readings due to a malfunctioning sending unit\u003c\/li\u003e\n\u003cli\u003eAddressing low fuel pressure issues causing engine performance problems\u003c\/li\u003e\n\u003cli\u003eFixing fuel delivery interruptions caused by clogged or damaged strainers\u003c\/li\u003e\n\u003cli\u003eEliminating fuel leaks with the included NBR gasket seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe F1114A assembly is designed for in-tank installation and does not include mounting hardware, so ensure you have the necessary tools and parts before beginning. The elliptic male connector and quick connect outlet facilitate straightforward electrical and fuel line connections. No specific installation warnings are provided, but proper handling and adherence to vehicle service manuals are recommended to avoid damage during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis Autobest Fuel Pump and Sender Assembly is performance-grade and manufactured in China. It is available to order and includes a NBR gasket for sealing. While specific warranty details are not provided, Autobest products typically meet industry standards for durability and reliability. Verify warranty coverage with the supplier or manufacturer at the time of purchase.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788268725,"sku":"FKDT-F1114A","price":89.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1114A_Fro.jpg?v=1774704979"},{"product_id":"autobest-f1117a-fuel-pump-and-sender-assembly","title":"Autobest F1117A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eReliable Fuel Pump and Sender Assembly for Ford and Mazda Trucks\u003c\/h2\u003e\u003cp\u003eThe Autobest F1117A fuel pump and sender assembly is designed for in-tank installation, providing consistent fuel delivery for Ford Ranger and Mazda B-series trucks. Engineered to meet performance standards, this assembly supports efficient fuel flow and accurate fuel level readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 6.5 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 32 gallons per hour (GPH) to maintain optimal engine performance\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for secure sealing\u003c\/li\u003e\n\u003cli\u003eElliptic male connector with quick connect outlet for easy installation\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford B2300, B3000, B4000, and Ranger models\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum of 80 PSI for consistent fuel delivery\u003c\/li\u003e\n\u003cli\u003eExternal strainer inlet type with 0.889-inch inlet size\u003c\/li\u003e\n\u003cli\u003eIn-tank design for direct fuel supply and reduced noise\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1117A fuel pump and sender assembly is manufactured in China and designed for performance-grade applications. It features a single elliptic male connector and a quick connect outlet sized at 3\/8 inch, facilitating straightforward electrical and fuel line connections. The assembly includes a fuel sending unit for accurate fuel level monitoring and an NBR gasket to ensure a tight seal within the fuel tank. The external strainer inlet helps filter debris before fuel enters the pump, protecting the fuel system components. With a flow rating of 32 GPH and operating pressures between 80 and 100 PSI, this pump supports steady fuel delivery for reliable engine operation in Ford and Mazda trucks.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis fuel pump and sender assembly is compatible with the following vehicles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Ranger (various model years)\u003c\/li\u003e\n\u003cli\u003eMazda B2300\u003c\/li\u003e\n\u003cli\u003eMazda B3000\u003c\/li\u003e\n\u003cli\u003eMazda B4000\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed to replace original equipment in these models, ensuring proper fit and function for fuel delivery and fuel level sensing.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Fuel Pump Assembly\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntermittent or no fuel delivery causing engine stalling or failure to start\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings due to faulty sending unit\u003c\/li\u003e\n\u003cli\u003eFuel pump noise or vibration indicating wear or damage\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure affecting engine performance and fuel efficiency\u003c\/li\u003e\n\u003cli\u003eLeaks or poor sealing within the fuel tank assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1117A is an in-tank fuel pump assembly designed for direct replacement. No mounting hardware is included, so retain original components during removal. The elliptic male connector and quick connect outlet simplify electrical and fuel line connections. Ensure the NBR gasket is properly seated to prevent leaks. No special installation warnings are noted, but standard safety precautions for fuel system work should be followed, including depressurizing the fuel system and working in a well-ventilated area.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAutobest provides this fuel pump and sender assembly with a performance-grade rating, suitable for maintaining reliable fuel delivery in Ford and Mazda trucks. The product is available to order and meets industry standards for fit and function. Warranty details should be confirmed at the point of purchase, as coverage may vary.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788301493,"sku":"FKDT-F1117A","price":87.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1117A_Fro.jpg?v=1774704979"},{"product_id":"autobest-f1122-electric-fuel-pump","title":"Autobest F1122 Electric Fuel Pump","description":"\u003ch2\u003eOverview of the Autobest Electric Fuel Pump F1122\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1122 is designed for reliable fuel delivery in select Chevrolet, Ford, Geo, GMC, Mazda, and Suzuki vehicles. This in-tank turbine pump offers consistent flow and pressure to support engine performance in models like the Chevrolet Tracker, Ford Aspire, and Mazda Miata.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage flow rating of 120 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eOperating current draw of 5 amps\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 123 PSI and minimum pressure of 80 PSI\u003c\/li\u003e\n\u003cli\u003eIn-tank turbine pump design with external strainer\u003c\/li\u003e\n\u003cli\u003eMale wire connectors, two in quantity\u003c\/li\u003e\n\u003cli\u003eCompatible with Chevrolet, Ford, Geo, GMC, Mazda, and Suzuki models\u003c\/li\u003e\n\u003cli\u003ePart number F1122 for precise identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1122 belongs to the Electric Fuel Pump brand line, which focuses on performance-grade fuel delivery components. This pump is engineered as an in-tank turbine type, providing efficient fuel flow with an average rating of 120 GPH. It operates at an average current draw of 5 amps, balancing power consumption and performance. The pump features an external strainer inlet with a 0.433-inch size and a single outlet with a 0.36-inch male tube barb connection. Two male wire connectors ensure secure electrical connections without the need for additional seals or gaskets. The pump maintains fuel pressure between 80 and 123 PSI, suitable for a range of fuel delivery requirements in compatible vehicles.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis electric fuel pump is compatible with various models from Chevrolet, Ford, Geo, GMC, Mazda, and Suzuki. It is specifically designed to work with vehicles such as the Chevrolet Tracker, Ford Aspire, Geo Sidekick, Mazda Miata, and Suzuki Samurai. The part number F1122 ensures proper fitment and function in these models, making it a suitable replacement for maintaining optimal fuel system performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel pressure and flow in aging or failing pumps\u003c\/li\u003e\n\u003cli\u003eResolves engine hesitation or stalling caused by fuel delivery issues\u003c\/li\u003e\n\u003cli\u003eAddresses fuel pump electrical failures with reliable male wire connectors\u003c\/li\u003e\n\u003cli\u003eImproves fuel system efficiency in performance applications\u003c\/li\u003e\n\u003cli\u003eSupports consistent engine operation in compatible Chevrolet, Ford, Geo, GMC, Mazda, and Suzuki vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1122 is designed for in-tank installation and does not include a gasket or seal, so ensure the existing seal is inspected or replaced during installation. The pump’s male wire connectors require proper matching with the vehicle’s wiring harness. No special installation warnings are noted, but standard safety precautions for fuel system work should be followed. The external strainer should be checked for debris before installation to prevent clogging.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Availability\u003c\/h2\u003e\u003cp\u003eThe F1122 electric fuel pump is available to order and meets performance-grade standards within the Autobest Electric Fuel Pump line. Manufactured in China, this pump is built to maintain consistent fuel delivery pressures and flow rates. While no specific warranty information is provided, the product is intended for professional automotive use and replacement in compatible Chevrolet, Ford, Geo, GMC, Mazda, and Suzuki vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788498101,"sku":"FKDT-F1122","price":33.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1122_Fro.jpg?v=1774704980"},{"product_id":"autobest-f1155a-fuel-pump-and-sender-assembly","title":"Autobest F1155A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Sender Assembly F1155A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1155A is designed for reliable fuel delivery in Ford Explorer and Mazda Navajo vehicles. This in-tank fuel pump assembly combines a fuel pump and sending unit to ensure accurate fuel level readings and consistent fuel flow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 7 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 37 gallons per hour (GPH) to meet performance demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eIn-tank design with external strainer inlet type for effective fuel filtration\u003c\/li\u003e\n\u003cli\u003eConnector: single male round connector for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 100 PSI; minimum pump pressure: 80 PSI\u003c\/li\u003e\n\u003cli\u003eOutlet size: 3\/8 inch quick connect for easy installation\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Explorer and Mazda Navajo models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Fuel Pump and Sender Assembly Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly product line integrates both the fuel pump and fuel sending unit into a single assembly. This design simplifies replacement and ensures compatibility between components, providing consistent fuel delivery and accurate fuel level monitoring. The F1155A model is part of this line, offering performance-grade specifications suitable for in-tank installation.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1155A fuel pump and sender assembly is engineered to deliver a steady fuel flow of 37 GPH while maintaining a current draw of 7 amps, balancing performance and efficiency. Its in-tank configuration includes an external strainer inlet sized at 0.433 inches, which helps prevent debris from entering the fuel system. The assembly features a single male round connector and a 3\/8 inch quick connect outlet, facilitating straightforward electrical and fuel line connections. The included NBR gasket ensures a proper seal to prevent leaks. Designed for Ford Explorer and Mazda Navajo vehicles, this assembly supports pump pressures ranging from 80 to 100 PSI, meeting the fuel system requirements of these models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of failing or noisy fuel pumps in Ford Explorer and Mazda Navajo\u003c\/li\u003e\n\u003cli\u003eRestoring accurate fuel level readings with the integrated sending unit\u003c\/li\u003e\n\u003cli\u003eResolving fuel delivery problems causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eAddressing fuel leaks by replacing worn gaskets or seals\u003c\/li\u003e\n\u003cli\u003eUpgrading to a performance-grade pump for consistent fuel pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe F1155A assembly is designed for in-tank installation and includes the fuel sending unit and gasket but does not come with mounting hardware or a fuel filter. Ensure the fuel tank is properly drained and cleaned before installation. The external strainer should be inspected for debris during replacement. The single male round connector and quick connect outlet simplify electrical and fuel line connections; verify secure fittings to avoid leaks or electrical issues. No special installation warnings are noted for this part.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAutobest provides this Fuel Pump and Sender Assembly as a performance-grade component manufactured in China. The part is available to order and meets specified pressure and flow ratings for Ford Explorer and Mazda Navajo vehicles. While specific warranty details are not provided, Autobest products typically adhere to industry standards for durability and reliability.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788760245,"sku":"FKDT-F1155A","price":91.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1155A_Fro.jpg?v=1774704980"},{"product_id":"autobest-f1164a-fuel-pump-module-assembly","title":"Autobest F1164A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1164A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1164A is designed for reliable fuel delivery in Ford Taurus and Mercury Sable vehicles. This in-tank fuel pump module offers consistent performance with a focus on durability and compatibility.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 9 Amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating: 45 gallons per hour (GPH) to meet engine demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eConnector configuration: 2 connectors with male and female genders, rectangular and round shapes\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 100 PSI, minimum pressure: 80 PSI for stable fuel supply\u003c\/li\u003e\n\u003cli\u003eInlet size: 0.433 inches with external and internal strainers\u003c\/li\u003e\n\u003cli\u003eOutlet: single quick connect, 3\/8 inch size\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation, compatible with Ford Taurus and Mercury Sable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Autobest F1164A fuel pump module assembly is engineered to fit specific Ford and Mercury models, including the Taurus and Sable. This module features both internal and external strainers to ensure clean fuel delivery and protect the fuel system. The included fuel sending unit provides accurate fuel level readings, while the NBR gasket ensures a secure seal to prevent leaks. The pump operates within a pressure range of 80 to 100 PSI, supporting consistent engine performance under various driving conditions.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Resolution\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is used to replace faulty or worn fuel pumps in compatible vehicles. It addresses several common fuel system issues:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent or no fuel delivery causing engine stalling or failure to start\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel level readings due to a malfunctioning sending unit\u003c\/li\u003e\n\u003cli\u003eFuel leaks from degraded seals or gaskets\u003c\/li\u003e\n\u003cli\u003eReduced fuel pressure affecting engine performance\u003c\/li\u003e\n\u003cli\u003eContaminated fuel supply due to damaged or missing strainers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Autobest F1164A fuel pump module assembly requires removal of the fuel tank for in-tank mounting. No special mounting hardware is included, so retain original components if possible. The module features quick connect outlets and dual connectors with male and female ends, simplifying electrical connections. Ensure the NBR gasket is properly seated to prevent leaks. No specific installation warnings are noted, but standard safety precautions when working with fuel systems should be followed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1164A meets performance-grade standards for fuel pump modules. It is available to order and includes a fuel sending unit and gasket for a complete assembly. While specific warranty details are not provided, Autobest products typically adhere to industry quality controls to ensure reliable operation in Ford Taurus and Mercury Sable vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788793013,"sku":"FKDT-F1164A","price":128.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1164A_Fro.jpg?v=1774704981"},{"product_id":"autobest-f1193-electric-fuel-pump","title":"Autobest F1193 Electric Fuel Pump","description":"\u003ch2\u003eOverview of the Autobest Electric Fuel Pump F1193\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1193 is designed for reliable fuel delivery in select Ford, Lincoln, and Mercury vehicles. This external rollervane pump offers consistent flow and pressure, making it suitable for models like the Ford Crown Victoria LTD and Lincoln Town Car.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 4.5 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFlow rating of 90 gallons per hour (GPH) to meet fuel demands\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 116 PSI and minimum pressure of 72.5 PSI\u003c\/li\u003e\n\u003cli\u003eExternal pump with threaded male inlet (3\/4-16 unf-2a) and hose outlet (0.322 inch)\u003c\/li\u003e\n\u003cli\u003eIncludes FKM gasket\/seal for secure installation\u003c\/li\u003e\n\u003cli\u003eTwo male threaded terminals for electrical connection\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford, Lincoln, and Mercury full-size sedans including Colony Park, Continental, Grand Marquis, LTD, LTD Crown Victoria, Mark VI, and Town Car\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Electric Fuel Pump Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump line focuses on delivering dependable fuel pumps engineered for external mounting applications. The F1193 model features a rollervane pump type, which provides steady fuel flow and pressure control without an integrated regulator. This product line emphasizes compatibility with classic and full-size vehicles, ensuring proper fitment and performance for specific Ford, Lincoln, and Mercury models.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1193 electric fuel pump by Autobest is an external rollervane pump designed to maintain consistent fuel delivery with an average flow rating of 90 GPH. It operates at an average current draw of 4.5 amps, balancing power consumption and performance. The pump supports a pressure range from 72.5 PSI minimum to 116 PSI maximum, suitable for fuel systems requiring stable pressure. The inlet features a 3\/4-16 unf-2a threaded male connection, while the outlet is a 0.322-inch hose type, facilitating straightforward integration into existing fuel lines. The included FKM gasket ensures a reliable seal to prevent leaks. This pump is compatible with several Ford, Lincoln, and Mercury models, including the Crown Victoria LTD and Lincoln Town Car, making it a practical replacement part for these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel pressure in Ford LTD Crown Victoria and Lincoln Town Car\u003c\/li\u003e\n\u003cli\u003eReplaces failing or noisy external fuel pumps in Mercury Grand Marquis and Ford Colony Park\u003c\/li\u003e\n\u003cli\u003eSolves fuel delivery interruptions causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eAddresses fuel pump electrical issues with reliable male threaded terminals\u003c\/li\u003e\n\u003cli\u003ePrevents fuel leaks with included FKM gasket for secure sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned for external mounting; verify compatibility with your vehicle’s fuel system\u003c\/li\u003e\n\u003cli\u003eNo special installation warnings; standard safety precautions recommended\u003c\/li\u003e\n\u003cli\u003eEnsure proper connection of the two male threaded terminals for electrical supply\u003c\/li\u003e\n\u003cli\u003eUse the included FKM gasket to prevent fuel leaks at the inlet connection\u003c\/li\u003e\n\u003cli\u003eCheck inlet and outlet sizes (3\/4-16 unf-2a inlet, 0.322 hose outlet) for fitment with existing fuel lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1193 is manufactured to meet OEM specifications and is available to order with assured quality. While specific warranty details are not provided, Autobest products typically adhere to industry standards for durability and performance. The pump’s design and included components, such as the FKM gasket, contribute to reliable operation in compatible Ford, Lincoln, and Mercury vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385788989621,"sku":"FKDT-F1193","price":58.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1193_Fro.jpg?v=1774704981"},{"product_id":"autobest-f1195a-fuel-pump-module-assembly","title":"Autobest F1195A Fuel Pump Module Assembly","description":"\u003ch2\u003eReliable Fuel Pump Module Assembly for Ford Taurus and Mercury Sable\u003c\/h2\u003e\u003cp\u003eThe Autobest F1195A fuel pump module assembly is engineered to provide consistent fuel delivery for Ford Taurus and Mercury Sable vehicles. Designed as an in-tank unit, this module ensures efficient fuel flow and accurate fuel level readings to maintain optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 7 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 34 gallons per hour (GPH) to meet performance demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for precise fuel level monitoring and sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Taurus and Mercury Sable models requiring part number F1195A\u003c\/li\u003e\n\u003cli\u003eFeatures both internal and external strainers for enhanced fuel filtration\u003c\/li\u003e\n\u003cli\u003eConstructed with durable POM housing material for long-lasting operation\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet with 3\/8 inch size for straightforward installation\u003c\/li\u003e\n\u003cli\u003ePerformance grade type designed to maintain fuel pressure between 80 and 100 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Construction\u003c\/h2\u003e\u003cp\u003eThe Autobest F1195A fuel pump module assembly is manufactured in China and built to meet performance standards for fuel delivery systems. The module is designed as an in-tank pump with a 0.433 inch strainer inlet, providing both internal and external filtration to protect the fuel system. The housing is made from POM, a durable polymer that withstands fuel exposure and heat. The included fuel sending unit allows for accurate fuel level readings, while the NBR gasket ensures a secure seal to prevent leaks. The module features two connectors with male and female genders in rectangular and round shapes, facilitating proper electrical connections.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is compatible with select Ford Taurus and Mercury Sable models. It is intended for vehicles that require part number F1195A and need a reliable in-tank fuel pump solution. The module supports fuel system pressures ranging from 80 to 100 PSI, suitable for maintaining consistent fuel delivery under various driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eResolves fuel delivery issues such as engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eAddresses inaccurate fuel gauge readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged fuel pump modules to restore proper fuel pressure\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks by providing a new NBR gasket seal\u003c\/li\u003e\n\u003cli\u003eImproves fuel filtration with integrated internal and external strainers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1195A fuel pump module assembly is designed for direct replacement in compatible Ford Taurus and Mercury Sable vehicles. No special installation warnings are noted, but it is recommended to follow manufacturer guidelines for fuel system servicing. Ensure all electrical connectors are securely attached, and verify the gasket is properly seated to prevent leaks. Since mounting hardware is not included, reuse existing components or acquire appropriate hardware as needed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAutobest provides this fuel pump module assembly with a focus on performance and durability. The product is available to order and meets quality standards for automotive fuel delivery components. While specific warranty details are not provided, Autobest products typically come with manufacturer-backed coverage to ensure reliability and customer satisfaction.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789022389,"sku":"FKDT-F1195A","price":87.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1195A_Fro.jpg?v=1774704981"},{"product_id":"autobest-f1201a-fuel-pump-module-assembly","title":"Autobest F1201A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1201A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1201A is designed specifically for Ford Windstar vehicles, providing reliable in-tank fuel delivery. Engineered to meet performance standards, this fuel pump module ensures consistent fuel flow and pressure for optimal engine operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 7 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 34 gallons per hour (GPH) to support engine demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for accurate fuel level readings and secure sealing\u003c\/li\u003e\n\u003cli\u003eConstructed with durable POM housing material for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eFeatures both internal and external strainers with a 0.433-inch inlet size\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet with 3\/8-inch size for easy installation\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation with malefemale rectangular and round connectors\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum of 80 PSI for consistent fuel delivery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1201A fuel pump module assembly is engineered to provide dependable fuel delivery for Ford Windstar models. This in-tank fuel pump features a robust POM housing and includes a fuel sending unit, allowing for precise fuel level monitoring. The module is equipped with both internal and external strainers to protect the fuel system from contaminants. Its malefemale connectors with rectangular and round shapes ensure secure electrical connections. The fuel pump operates within a pressure range of 80 to 100 PSI, maintaining steady fuel flow rated at 34 GPH, which supports the engine’s performance requirements while drawing an average current of 7 amps.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Ford Windstar vehicles\u003c\/li\u003e\n\u003cli\u003eResolves inconsistent fuel pressure causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eFixes inaccurate fuel level readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eEliminates fuel delivery interruptions caused by clogged strainers\u003c\/li\u003e\n\u003cli\u003eAddresses fuel leaks by providing a new NBR gasket seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1201A fuel pump module assembly is designed for direct in-tank installation with no special mounting hardware included. Ensure the fuel tank is properly drained and depressurized before removal. The module’s quick connect outlet and malefemale connectors simplify electrical and fuel line connections. Verify connector orientation and secure the NBR gasket to prevent leaks. No specific installation warnings are noted, but following manufacturer guidelines for fuel system service is recommended.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1201A fuel pump module assembly meets performance-grade standards for durability and reliability. The product is available to order and includes a fuel sending unit and gasket for comprehensive replacement. While specific warranty details are not provided, Autobest products typically adhere to industry quality controls to ensure consistent operation in Ford Windstar applications.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789087925,"sku":"FKDT-F1201A","price":103.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1201A_Fro.jpg?v=1774704982"},{"product_id":"autobest-f1202a-fuel-pump-module-assembly","title":"Autobest F1202A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1202A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1202A is designed for reliable fuel delivery in Ford Escape and Mazda Tribute vehicles. This in-tank fuel pump module offers consistent performance with a focus on durability and compatibility.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 6.5 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 34 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eInlet size of 0.433 inches with external and internal strainers\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet with 3\/8 inch size and single male round connector\u003c\/li\u003e\n\u003cli\u003ePerformance grade with POM housing material\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum of 80 PSI\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Ford Escape and Mazda Tribute models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1202A fuel pump module assembly is engineered as an in-tank solution, ensuring optimal fuel delivery and pressure regulation for Ford Escape and Mazda Tribute vehicles. Featuring a durable POM housing and a performance-grade design, this module maintains fuel pressures between 80 and 100 PSI. The unit includes both external and internal strainers to protect the fuel system from contaminants, while the included fuel sending unit provides accurate fuel level readings. The module’s single male round connector and quick connect outlet simplify installation and ensure secure connections. The NBR gasket included helps maintain a proper seal within the fuel tank, preventing leaks and maintaining system integrity.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is compatible with the following vehicles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Escape\u003c\/li\u003e\n\u003cli\u003eMazda Tribute\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed to replace original equipment fuel pump modules in these models, addressing issues related to fuel delivery and fuel level sensing.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Fuel Pump Module\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntermittent or no fuel delivery causing engine stalling or failure to start\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings due to faulty sending unit\u003c\/li\u003e\n\u003cli\u003eFuel pressure fluctuations affecting engine performance\u003c\/li\u003e\n\u003cli\u003eFuel contamination leading to clogged strainers and reduced flow\u003c\/li\u003e\n\u003cli\u003eLeaks caused by worn or damaged gaskets or seals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1202A is designed for direct replacement in compatible Ford Escape and Mazda Tribute models. No special installation warnings are noted, but it is recommended to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsure the fuel tank is properly depressurized before removal\u003c\/li\u003e\n\u003cli\u003eVerify connector orientation and secure the male round connector firmly\u003c\/li\u003e\n\u003cli\u003eInspect and replace the gasket if necessary to prevent leaks\u003c\/li\u003e\n\u003cli\u003eCheck fuel lines and quick connect outlet for proper fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1202A fuel pump module assembly meets performance-grade standards with quality materials such as POM housing and NBR gasket. The product is available to order and includes a fuel sending unit for accurate fuel level monitoring. Warranty details should be confirmed with the distributor or retailer, as they may vary.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789284533,"sku":"FKDT-F1202A","price":99.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1202A_Fro_313f9848-5727-4e16-99ef-87116fa669a8.jpg?v=1774704982"},{"product_id":"autobest-f1204a-fuel-pump-module-assembly","title":"Autobest F1204A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1204A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1204A is designed for reliable fuel delivery in select Ford and Mazda trucks. Engineered to meet the specific requirements of Ford Ranger and Mazda B-series models, this in-tank fuel pump module ensures consistent fuel flow and pressure for optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 6 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 31 gallons per hour (GPH) to support engine demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and FKM gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eFemale round connector with one outlet and quick connect outlet type\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 68.2 PSI and minimum pressure of 62.3 PSI\u003c\/li\u003e\n\u003cli\u003eInternal strainer inlet type with 0.433 inch inlet size\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Ranger and Mazda B2300, B3000, B4000 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe F1204A fuel pump module assembly is an in-tank design that integrates the fuel pump and sending unit into a single module. It features a female round connector with one connection point, facilitating straightforward electrical hookup. The pump operates with an average current draw of 6 amps and delivers a steady fuel flow rated at 31 GPH, suitable for regular grade fuel systems. The internal strainer inlet prevents debris from entering the fuel system, while the included FKM gasket ensures a secure seal to prevent leaks. The outlet is a quick connect type with a 3\/8 inch size, simplifying fuel line attachment. This module does not include a fuel filter or tank pressure sensor but comes with the necessary gasket or seal for installation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is compatible with the following vehicles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Ranger (various model years)\u003c\/li\u003e\n\u003cli\u003eMazda B2300\u003c\/li\u003e\n\u003cli\u003eMazda B3000\u003c\/li\u003e\n\u003cli\u003eMazda B4000\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed to replace the original fuel pump module in these trucks, ensuring proper fuel delivery and accurate fuel level readings through the included sending unit.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Fuel Pump Module\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntermittent or complete fuel delivery failure\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings due to faulty sending unit\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure causing engine performance issues\u003c\/li\u003e\n\u003cli\u003eFuel pump noise or overheating from worn components\u003c\/li\u003e\n\u003cli\u003eLeaks caused by degraded or missing gasket seals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1204A fuel pump module assembly is designed for in-tank installation and includes the necessary FKM gasket for sealing. No mounting hardware is included, so reusing original hardware or sourcing compatible fasteners is recommended. The module features a female round connector and quick connect outlet for ease of installation. No special installation warnings are noted, but care should be taken to avoid contamination of the fuel system during replacement. Ensure the electrical connector is securely attached and the gasket is properly seated to prevent leaks.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1204A fuel pump module assembly meets regular grade standards for fuel delivery components. It is available to order and backed by Autobest's quality control processes. While specific warranty details are not provided, Autobest products typically come with a limited warranty covering defects in materials and workmanship. Buyers should verify warranty terms with the distributor or installer.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789317301,"sku":"FKDT-F1204A","price":113.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1204A_Fro.jpg?v=1774704982"},{"product_id":"autobest-f1205a-fuel-pump-module-assembly","title":"Autobest F1205A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1205A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1205A is designed specifically for Ford Taurus and Mercury Sable models. This in-tank fuel pump module ensures reliable fuel delivery with a performance-grade design tailored to meet the demands of these vehicles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 8 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 37 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eInlet size of 0.433 inches with both internal and external strainers\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet with 3\/8 inch size for secure fuel line attachment\u003c\/li\u003e\n\u003cli\u003eConstructed with durable POM housing material\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Taurus and Mercury Sable fuel systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Features\u003c\/h2\u003e\u003cp\u003eThe F1205A fuel pump module assembly operates within a pressure range of 80 to 100 PSI, providing consistent fuel pressure for optimal engine performance. It features two connectors with male and female genders in rectangular and round shapes, ensuring proper electrical connections. The module is designed for in-tank installation and includes a fuel sending unit to accurately measure fuel levels. Although it does not include a fuel filter or tank pressure sensor, the external and internal strainers help protect the fuel system from contaminants. The included NBR gasket ensures a reliable seal to prevent leaks.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is compatible with select Ford Taurus and Mercury Sable models. It is intended for use in vehicles requiring a performance-grade in-tank fuel pump module that maintains steady fuel flow and pressure. The part number F1205A should be referenced to confirm fitment with your specific vehicle year and engine configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eResolves fuel delivery issues such as engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eAddresses low fuel pressure problems affecting engine performance\u003c\/li\u003e\n\u003cli\u003eReplaces faulty fuel sending units causing inaccurate fuel gauge readings\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks by providing a new NBR gasket seal\u003c\/li\u003e\n\u003cli\u003eImproves fuel system reliability in Ford Taurus and Mercury Sable vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1205A fuel pump module assembly is designed for direct in-tank replacement with no special installation warnings. Ensure the vehicle’s battery is disconnected before beginning installation to avoid electrical hazards. Verify connector types and shapes match the vehicle’s wiring harness for proper connection. Since mounting hardware is not included, reuse existing hardware or source compatible fasteners. Properly seat the NBR gasket to prevent fuel leaks during operation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1205A fuel pump module assembly meets performance-grade standards for durability and reliability. The product is available to order and backed by Autobest’s quality control processes. Please consult the warranty information provided by the distributor or manufacturer for coverage details.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789350069,"sku":"FKDT-F1205A","price":98.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1205A_Fro.jpg?v=1774704983"},{"product_id":"autobest-f1206a-fuel-pump-module-assembly","title":"Autobest F1206A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1206A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1206A is designed specifically for Ford Ranger models, providing reliable fuel delivery performance. This in-tank fuel pump module ensures consistent fuel flow and pressure to support your vehicle's engine needs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 7 Amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating: 37 gallons per hour (GPH) to maintain optimal engine performance\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and FKM gasket for accurate fuel level readings and secure sealing\u003c\/li\u003e\n\u003cli\u003eConnector: single female round connector for straightforward electrical connection\u003c\/li\u003e\n\u003cli\u003eInlet type: internal strainer with 0.433 inch inlet size to filter fuel before pumping\u003c\/li\u003e\n\u003cli\u003eOutlet: one quick connect outlet with 3\/8 inch size for easy fuel line attachment\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 63.8 PSI, minimum pump pressure: 58 PSI for stable fuel delivery\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation, compatible with Ford Ranger fuel systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1206A fuel pump module assembly is engineered to meet the fuel delivery requirements of Ford Ranger vehicles. Featuring an internal strainer inlet and a quick connect outlet, this module facilitates clean fuel flow and simple installation. The included fuel sending unit provides accurate fuel level data to the vehicle’s gauge, while the FKM gasket ensures a durable seal to prevent leaks. Operating at an average current draw of 7 amps and delivering 37 GPH, this fuel pump module maintains consistent pressure between 58 and 63.8 PSI, supporting engine efficiency and performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces faulty or failing fuel pump modules in Ford Ranger models\u003c\/li\u003e\n\u003cli\u003eResolves issues with inconsistent fuel pressure or flow\u003c\/li\u003e\n\u003cli\u003eFixes inaccurate fuel level readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eAddresses fuel leaks by providing a reliable FKM gasket seal\u003c\/li\u003e\n\u003cli\u003eImproves engine performance by ensuring steady fuel delivery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is designed for in-tank installation and includes the pump and module components. No mounting hardware is included, so ensure compatibility with your existing setup. The single female round connector and quick connect outlet simplify electrical and fuel line connections. No special installation warnings are noted, but it is recommended to follow vehicle-specific service manual instructions for safe and proper installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured by Autobest, this fuel pump module assembly is made in China and meets regular grade standards. The product is available to order and includes a fuel sending unit and FKM gasket for quality and durability. While specific warranty details are not provided, Autobest products typically adhere to industry standards for replacement parts, ensuring dependable performance for Ford Ranger fuel systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789382837,"sku":"FKDT-F1206A","price":118.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1206A_Fro.jpg?v=1774704983"},{"product_id":"autobest-f1207a-fuel-pump-and-sender-assembly","title":"Autobest F1207A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Sender Assembly F1207A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1207A is designed for reliable fuel delivery in Ford and Mercury vehicles. Specifically compatible with Ford Explorer, Explorer Sport, Explorer Sport Trac, and Mercury Mountaineer models, this in-tank fuel pump assembly ensures consistent performance and accurate fuel level readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 6 Amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating: 28 gallons per hour (GPH) to meet engine demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eConnector configuration: two connectors with male and female ends, rectangular and round shapes\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 68.2 PSI; minimum pump pressure: 62.4 PSI\u003c\/li\u003e\n\u003cli\u003eExternal strainer inlet type with 0.433 inch inlet size\u003c\/li\u003e\n\u003cli\u003eOutlet: single quick connect, 3\/8 inch size\u003c\/li\u003e\n\u003cli\u003eIn-tank installation type for direct fuel delivery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Fuel Pump and Sender Assembly Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly product line combines fuel pump and fuel level sending unit into a single assembly. This integration simplifies replacement and ensures compatibility between components. The F1207A model maintains performance standards suitable for Ford and Mercury vehicles requiring precise fuel flow and accurate fuel level monitoring.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1207A fuel pump and sender assembly is engineered to provide consistent fuel delivery with an average flow rating of 28 GPH, supporting engine performance under various driving conditions. Its in-tank design includes an external strainer inlet to filter fuel before it reaches the pump, helping to protect the fuel system. The assembly features a durable NBR gasket to prevent leaks and maintain proper sealing within the fuel tank. Electrical connections include two connectors with male and female ends, shaped rectangular and round, ensuring secure and correct installation. The pump operates within a pressure range of 62.4 to 68.2 PSI, suitable for the fuel system requirements of compatible Ford Explorer and Mercury Mountaineer models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel delivery in Ford Explorer and Mercury Mountaineer vehicles\u003c\/li\u003e\n\u003cli\u003eResolves fuel level gauge inaccuracies by replacing the sending unit\u003c\/li\u003e\n\u003cli\u003eEliminates engine performance issues caused by weak or failing fuel pumps\u003c\/li\u003e\n\u003cli\u003ePrevents fuel leaks with included NBR gasket for secure sealing\u003c\/li\u003e\n\u003cli\u003eAddresses fuel system pressure inconsistencies within specified PSI range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThis assembly is designed for in-tank installation and does not include mounting hardware, so ensure existing hardware is in good condition or replaced as needed. No special installation warnings are noted, but proper handling of electrical connectors and fuel lines is recommended. The external strainer should be inspected during installation to confirm it is free of debris. Compatibility with Ford Explorer, Explorer Sport, Explorer Sport Trac, and Mercury Mountaineer models should be verified before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1207A is manufactured to meet performance and durability standards for automotive fuel delivery components. It is available to order and includes a fuel sending unit and NBR gasket to ensure proper function and sealing. Warranty details should be confirmed with the distributor or retailer, as they may vary.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789448373,"sku":"FKDT-F1207A","price":98.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1207A_Fro.jpg?v=1774704983"},{"product_id":"autobest-f1209a-fuel-pump-and-sender-assembly","title":"Autobest F1209A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eReliable Fuel Pump and Sender Assembly for Ford Expedition\u003c\/h2\u003e\u003cp\u003eThe Autobest F1209A fuel pump and sender assembly is designed specifically for Ford Expedition models, providing consistent fuel delivery and accurate fuel level readings. Engineered for in-tank installation, this performance-grade unit supports optimal engine operation with precise flow and pressure specifications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 6.5 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 34 gallons per hour (GPH) to meet performance demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for secure sealing\u003c\/li\u003e\n\u003cli\u003eExternal strainer inlet type with 0.433-inch size for effective fuel filtration\u003c\/li\u003e\n\u003cli\u003eQuick connect 3\/8-inch outlet for straightforward installation\u003c\/li\u003e\n\u003cli\u003eConnector configuration: two connectors with male and female rectangle plus round shapes\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank mounting with a maximum pump pressure of 100 PSI and minimum of 80 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1209A fuel pump and sender assembly is manufactured in China and built to meet performance-grade standards. It features an external strainer inlet that helps protect the pump from debris, ensuring longevity and reliable operation. The unit operates within a pressure range of 80 to 100 PSI, suitable for maintaining consistent fuel delivery in Ford Expedition vehicles. The assembly includes a fuel sending unit for accurate fuel level monitoring and an NBR gasket to prevent leaks. The connector design includes two connectors with male and female ends, shaped as rectangle plus round, facilitating compatibility with factory wiring harnesses.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Problem Resolution\u003c\/h2\u003e\u003cp\u003eThis fuel pump and sender assembly is compatible with Ford Expedition models requiring part number F1209A. It is intended for in-tank installation and addresses several common fuel system issues, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent or no fuel delivery causing engine stalling or failure to start\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel gauge readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eFuel pump noise or vibration indicating wear or damage\u003c\/li\u003e\n\u003cli\u003eLow fuel pressure affecting engine performance and fuel efficiency\u003c\/li\u003e\n\u003cli\u003eLeaks caused by deteriorated gaskets or seals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1209A assembly is designed for direct replacement in compatible Ford Expedition models. No special installation warnings are noted, but it is recommended to verify connector orientation and ensure the NBR gasket is properly seated to prevent leaks. The quick connect outlet simplifies fuel line attachment. Mounting hardware is not included, so retain original components or source compatible hardware as needed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAutobest provides this fuel pump and sender assembly with a focus on durability and performance. The product is available to order and meets industry standards for fuel delivery components. While specific warranty details are not provided, Autobest products typically come with manufacturer-backed coverage to protect against defects in materials and workmanship.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789481141,"sku":"FKDT-F1209A","price":96.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1209A_Fro.jpg?v=1774704985"},{"product_id":"autobest-f1217a-fuel-pump-and-sender-assembly","title":"Autobest F1217A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Sender Assembly F1217A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1217A is designed for reliable fuel delivery in select Ford E-Series vehicles. This in-tank fuel pump and sender unit provides consistent flow and pressure to support engine performance in Ford E-150, E-250, and E-350 models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 6 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 32 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for accurate fuel level readings\u003c\/li\u003e\n\u003cli\u003eIn-tank installation with external strainer inlet type\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 100 PSI; minimum pump pressure: 80 PSI\u003c\/li\u003e\n\u003cli\u003eConnector: 1 male round connector for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eOutlet: single 3\/8 inch quick connect fitting\u003c\/li\u003e\n\u003cli\u003eIncludes NBR gasket\/seal for proper sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Fuel Pump and Sender Assembly Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly line focuses on performance-grade fuel delivery components designed to meet or exceed OEM specifications. This product line integrates both the fuel pump and sending unit into a single assembly, simplifying replacement and ensuring compatibility with the vehicle’s fuel system. The F1217A model is engineered for Ford E-Series vans, providing a balance of flow rate and pressure suitable for these applications.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1217A fuel pump and sender assembly is an in-tank unit manufactured in China, featuring a durable external strainer inlet to protect the pump from debris. It operates with an average current draw of 6 amps and delivers a steady flow of 32 GPH, maintaining fuel pressure between 80 and 100 PSI. The assembly includes a fuel sending unit for accurate fuel level monitoring and an NBR gasket to ensure a secure seal during installation. The electrical connector is a single male round type, and the outlet uses a 3\/8 inch quick connect fitting for straightforward fuel line attachment. This assembly does not include a fuel filter or mounting hardware.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement fuel pump and sender for Ford E-150, E-150 Club Wagon, and E-150 Econoline models\u003c\/li\u003e\n\u003cli\u003eSuitable for Ford E-250 and E-250 Econoline vans\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford E-350, E-350 Club Wagon, E-350 Econoline, and E-350 Super Duty vehicles\u003c\/li\u003e\n\u003cli\u003eAddresses issues such as low fuel pressure, inaccurate fuel gauge readings, and fuel delivery interruptions\u003c\/li\u003e\n\u003cli\u003eIdeal for restoring fuel system performance in aging or malfunctioning Ford E-Series vans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned for in-tank installation; ensure proper handling to avoid damage to the fuel sending unit\u003c\/li\u003e\n\u003cli\u003eVerify connector type and fuel line fittings match vehicle specifications before installation\u003c\/li\u003e\n\u003cli\u003eUse the included NBR gasket to prevent leaks and ensure a tight seal\u003c\/li\u003e\n\u003cli\u003eNo mounting hardware included; reuse existing hardware or source separately as needed\u003c\/li\u003e\n\u003cli\u003eFollow vehicle manufacturer guidelines for fuel system servicing and safety precautions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1217A is a performance-grade component built to meet OEM standards for fit and function. It is available to order and backed by Autobest’s quality control processes. Warranty details should be confirmed with the distributor or retailer at the time of purchase.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789612213,"sku":"FKDT-F1217A","price":100.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1217A_Fro.jpg?v=1774704986"},{"product_id":"autobest-f1229a-fuel-pump-module-assembly","title":"Autobest F1229A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1229A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1229A is designed specifically for Ford Mustang models, providing reliable in-tank fuel delivery. Engineered to meet performance standards, this fuel pump module ensures consistent fuel flow and pressure for optimal engine operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 5.8 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 29 gallons per hour (GPH) to support performance demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eExternal strainer inlet type with 0.433-inch inlet size\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet with 3\/8-inch size for secure fuel line attachment\u003c\/li\u003e\n\u003cli\u003eConnector configuration includes two connectors with male and female genders in rectangle and round shapes\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation with a maximum pump pressure of 100 PSI and minimum of 80 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1229A fuel pump module assembly is a performance-grade component manufactured in China, tailored for Ford Mustang vehicles. This module integrates a fuel pump and sending unit, eliminating the need for separate parts. The external strainer inlet helps protect the pump from debris, while the included NBR gasket ensures a tight seal to prevent leaks. With a fuel flow rating of 29 GPH and operating pressure between 80 and 100 PSI, this module supports consistent fuel delivery under various driving conditions. The dual connector setup with male and female terminals in both rectangular and round shapes facilitates straightforward electrical connections. The quick connect outlet simplifies fuel line installation, enhancing serviceability.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Ford Mustang models\u003c\/li\u003e\n\u003cli\u003eResolves inconsistent fuel pressure issues affecting engine performance\u003c\/li\u003e\n\u003cli\u003eAddresses fuel sending unit malfunctions causing inaccurate fuel gauge readings\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks by providing a reliable NBR gasket seal\u003c\/li\u003e\n\u003cli\u003eImproves fuel delivery reliability in performance driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is designed for in-tank installation and does not include mounting hardware, so ensure existing hardware is compatible or sourced separately. No special installation warnings are noted, but proper handling of electrical connectors and fuel lines is recommended. The external strainer should be inspected during installation to confirm it is free of debris. Verify connector orientation using the male and female terminals to avoid misconnection.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest F1229A fuel pump module assembly is performance grade and available to order with quality control measures in place. It includes a fuel sending unit and NBR gasket to meet OEM standards. Warranty details should be confirmed with the distributor or retailer, as they may vary. This product is engineered to maintain consistent fuel pressure and flow, supporting the operational reliability of Ford Mustang vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789677749,"sku":"FKDT-F1229A","price":122.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1229A_Fro.jpg?v=1774704986"},{"product_id":"autobest-f1231a-fuel-pump-module-assembly","title":"Autobest F1231A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1231A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1231A is designed for reliable fuel delivery in select Ford Econoline models. Engineered to meet performance standards, this in-tank fuel pump module ensures consistent fuel flow and pressure for optimal engine operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 7 Amps\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 33 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket\/seal\u003c\/li\u003e\n\u003cli\u003eIn-tank design with both internal and external strainers\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 100 PSI; minimum pump pressure: 80 PSI\u003c\/li\u003e\n\u003cli\u003eSingle male round connector and quick connect outlet (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003eHousing made of durable POM material\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Fuel Pump Module Assembly Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly line focuses on performance-grade fuel delivery components. This product line integrates essential features such as fuel sending units and quality sealing materials to maintain fuel system integrity. The F1231A model exemplifies this approach by combining efficient flow rates with robust construction suitable for demanding applications.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1231A fuel pump module assembly is an in-tank unit designed specifically for Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, E-350 Econoline, and E-350 Econoline Club Wagon models. It operates with an average current draw of 7 amps and delivers a steady flow rate of 33 GPH, supporting engine performance under various driving conditions. The module includes a fuel sending unit for accurate fuel level readings and a NBR gasket to ensure a secure seal within the fuel tank. Both internal and external strainers are incorporated to filter contaminants effectively, protecting the fuel system. The pump maintains pressure between 80 and 100 PSI, suitable for the specified vehicle applications. The single male round connector and quick connect outlet simplify electrical and fuel line connections during installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Ford Econoline vans\u003c\/li\u003e\n\u003cli\u003eRestores proper fuel pressure and flow to prevent engine hesitation\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate fuel level readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eEliminates fuel delivery interruptions caused by clogged strainers\u003c\/li\u003e\n\u003cli\u003eAddresses fuel leaks by providing a reliable gasket seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe F1231A fuel pump module assembly is designed for direct replacement in compatible Ford Econoline models. No special installation warnings are noted, but it is recommended to handle the unit carefully to avoid damage to the fuel sending unit and connectors. Ensure all electrical and fuel line connections are secure and leak-free. Since mounting hardware is not included, reuse existing hardware or source appropriate fasteners as needed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is manufactured with performance-grade materials, including a POM housing and NBR gasket, to ensure durability and reliable operation. The product is available to order and meets OEM specifications for the listed Ford Econoline models. Warranty details should be confirmed with the distributor or manufacturer at the time of purchase.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385789972661,"sku":"FKDT-F1231A","price":121.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1231A_Fro_82c0c894-9bf9-496d-874f-026673605205.jpg?v=1774704987"},{"product_id":"autobest-f1232a-fuel-pump-and-sender-assembly","title":"Autobest F1232A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Sender Assembly F1232A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1232A is designed for reliable fuel delivery in Ford trucks, including the F-150, F-150 Heritage, and F-250 models. This in-tank fuel pump assembly combines a fuel pump and sending unit to ensure accurate fuel level readings and consistent fuel flow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 5.5 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 29 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for secure sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford F-150, F-150 Heritage, and F-250 trucks\u003c\/li\u003e\n\u003cli\u003eIn-tank design with external strainer inlet type\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum of 80 PSI\u003c\/li\u003e\n\u003cli\u003eSingle male round connector with quick connect outlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Fuel Pump and Sender Assembly Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly product line integrates both the fuel pump and fuel sending unit into a single assembly. This design simplifies installation and ensures compatibility between components, providing consistent fuel delivery and accurate fuel level monitoring. The F1232A model is engineered for performance-grade applications, meeting the demands of Ford truck owners who require dependable fuel system components.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1232A fuel pump assembly features an average flow rating of 29 GPH, suitable for maintaining optimal engine performance in Ford F-150, F-150 Heritage, and F-250 vehicles. Its in-tank configuration includes an external strainer inlet sized at 0.433 inches, which helps protect the pump from debris. The assembly operates within a pressure range of 80 to 100 PSI, ensuring consistent fuel delivery under various driving conditions. The single male round connector and quick connect outlet simplify electrical and fuel line connections. Additionally, the included NBR gasket provides a reliable seal to prevent leaks.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel delivery in Ford F-150 and F-250 trucks experiencing fuel starvation\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate fuel gauge readings by replacing faulty sending units\u003c\/li\u003e\n\u003cli\u003eEliminates engine stalling or hesitation caused by weak or failing fuel pumps\u003c\/li\u003e\n\u003cli\u003eAddresses fuel pressure inconsistencies affecting engine performance\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged in-tank fuel pump assemblies for improved reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1232A assembly is designed for in-tank installation with no special mounting hardware included. It features a single male round connector and quick connect outlet for straightforward electrical and fuel line connections. No specific installation warnings are noted, but it is recommended to verify compatibility with your Ford F-150, F-150 Heritage, or F-250 model before installation. Ensure the gasket is properly seated to prevent fuel leaks.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis fuel pump and sender assembly is manufactured to performance-grade standards and is available to order. While specific warranty details are not provided, Autobest products typically undergo quality control to meet OEM specifications. Confirm warranty coverage with the supplier or manufacturer at the time of purchase.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790005429,"sku":"FKDT-F1232A","price":104.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1232A_Fro.jpg?v=1774704987"},{"product_id":"autobest-f1241a-fuel-pump-module-assembly","title":"Autobest F1241A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1241A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1241A is engineered for reliable fuel delivery in Ford F-250 Super Duty and F-350 Super Duty trucks. Designed as an in-tank unit, this assembly ensures consistent fuel flow and pressure to support engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 8 Amps\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 37 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket\u003c\/li\u003e\n\u003cli\u003eConnector type: 2 connectors, male and female, rectangular and round shapes\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 100 PSI; minimum pump pressure: 80 PSI\u003c\/li\u003e\n\u003cli\u003eHousing material: POM (Polyoxymethylene)\u003c\/li\u003e\n\u003cli\u003eExternal and internal strainers included\u003c\/li\u003e\n\u003cli\u003eOutlet: single quick connect, 3\/8 inch size\u003c\/li\u003e\n\u003cli\u003eInlet size: 0.433 inch with strainer type\u003c\/li\u003e\n\u003cli\u003eGrade type: Performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Fuel Pump Module Assembly from Autobest is part of the Fuel Pump Module Assembly product line, which focuses on delivering performance-grade fuel delivery components. The assembly is designed for in-tank installation, combining the pump and module into one unit for streamlined replacement. It features both internal and external strainers to protect the fuel system from contaminants. The included fuel sending unit provides accurate fuel level readings, while the NBR gasket ensures a secure seal to prevent leaks. The pump operates within a pressure range of 80 to 100 PSI, suitable for maintaining optimal fuel pressure in Ford F-250 Super Duty and F-350 Super Duty models. The connectors are designed with both male and female ends in rectangular and round shapes, facilitating proper electrical connections.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFord F-250 Super Duty\u003c\/li\u003e\n\u003cli\u003eFord F-350 Super Duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis fuel pump module assembly is specifically compatible with these Ford Super Duty trucks, ensuring proper fitment and function.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Fuel Pump Module Assembly\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntermittent or complete fuel delivery failure\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel level readings due to faulty sending unit\u003c\/li\u003e\n\u003cli\u003eFuel pressure fluctuations affecting engine performance\u003c\/li\u003e\n\u003cli\u003eFuel pump noise or overheating from worn components\u003c\/li\u003e\n\u003cli\u003eFuel leaks caused by degraded gaskets or seals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1241A Fuel Pump Module Assembly is designed for direct replacement without the need for additional mounting hardware. It installs inside the fuel tank and includes a NBR gasket for sealing. Ensure all electrical connectors match the male and female rectangular and round shapes provided. No special installation warnings are noted, but proper safety precautions when working with fuel systems should be followed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is manufactured to performance-grade standards with durable POM housing material and includes both internal and external strainers for extended service life. The product is available to order and backed by Autobest's quality control processes. Warranty details should be confirmed with the distributor or manufacturer.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790038197,"sku":"FKDT-F1241A","price":124.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1241A_Fro.jpg?v=1774704988"},{"product_id":"autobest-f1246a-fuel-pump-module-assembly","title":"Autobest F1246A Fuel Pump Module Assembly","description":"\u003ch2\u003eReliable Fuel Pump Module Assembly for Ford Super Duty Trucks\u003c\/h2\u003e\u003cp\u003eThe Autobest F1246A fuel pump module assembly is designed specifically for Ford F-250 Super Duty and F-350 Super Duty models. Engineered to deliver consistent fuel flow and pressure, this in-tank fuel pump module supports optimal engine performance and reliability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 7.5 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 34 gallons per hour (GPH) to meet performance demands\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for accurate fuel level readings and secure sealing\u003c\/li\u003e\n\u003cli\u003eConstructed with durable POM housing material for long-lasting operation\u003c\/li\u003e\n\u003cli\u003eCompatible with external and internal strainers for enhanced fuel filtration\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet with 3\/8 inch size for straightforward installation\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation with rectangular and round male\/female connectors\u003c\/li\u003e\n\u003cli\u003eMaintains fuel pressure between 80 and 100 PSI for consistent engine fuel delivery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1246A fuel pump module assembly is a performance-grade component manufactured in China. It features a dual-connector design with both male and female rectangular and round connectors, ensuring compatibility with factory wiring harnesses on Ford F-250 Super Duty and F-350 Super Duty trucks. The module includes a fuel sending unit for precise fuel level monitoring and an NBR gasket to prevent leaks. Its POM housing material offers resistance to fuel corrosion and mechanical wear. The pump operates within a pressure range of 80 to 100 PSI and delivers an average flow rate of 34 GPH, supporting the fuel demands of heavy-duty engines. Both internal and external strainers are incorporated to protect the fuel system from contaminants.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Ford F-250 Super Duty and F-350 Super Duty trucks\u003c\/li\u003e\n\u003cli\u003eResolves inconsistent fuel pressure causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eAddresses inaccurate fuel gauge readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003ePrevents fuel leaks with included NBR gasket for secure sealing\u003c\/li\u003e\n\u003cli\u003eImproves fuel delivery reliability in trucks experiencing performance drops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1246A fuel pump module assembly is designed for in-tank installation and does not include mounting hardware. Ensure the fuel tank is properly drained and depressurized before removal. The module features quick connect outlets and dual connectors for straightforward wiring connections. No special installation warnings are noted, but following manufacturer guidelines for fuel system service is recommended. Verify connector orientation and gasket placement to avoid leaks.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is performance-grade and available to order for immediate replacement needs. It includes a fuel sending unit and gasket to meet OEM specifications. While specific warranty details are not provided, Autobest products typically undergo quality control to ensure durability and fitment accuracy for Ford F-250 Super Duty and F-350 Super Duty vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790070965,"sku":"FKDT-F1246A","price":113.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1246A_Fro.jpg?v=1774704988"},{"product_id":"autobest-f1247-electric-fuel-pump","title":"Autobest F1247 Electric Fuel Pump","description":"\u003ch2\u003eOverview of the Autobest Electric Fuel Pump F1247\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1247 is designed for reliable fuel delivery in select Ford vehicles. Engineered as an external rollervane pump, it provides consistent flow and pressure to support engine performance in models like the Ford E-350 Econoline and F-250 Super Duty.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 7.5 amps for efficient power use\u003c\/li\u003e\n\u003cli\u003eFlow rating: 130 gallons per hour (GPH) to meet fuel demand\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 137.8 PSI, minimum pressure: 94.3 PSI\u003c\/li\u003e\n\u003cli\u003eExternal pump with threaded male inlet (3\/4-16 unf-2a) and quick connect outlet (0.311 inch)\u003c\/li\u003e\n\u003cli\u003eIncludes FKM gasket\/seal for secure installation\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford E-350 Club Wagon, Excursion, F-350 Super Duty, and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Electric Fuel Pump Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump line focuses on delivering dependable fuel pumps designed for external mounting applications. This product line emphasizes durability and consistent fuel flow, using rollervane pump technology to maintain stable pressure and efficient operation. The F1247 model fits within this line, offering a balance of performance and compatibility for various Ford truck and van models.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1247 electric fuel pump by Autobest is an external rollervane pump engineered to provide steady fuel flow and pressure for medium to heavy-duty Ford vehicles. With an average flow rating of 130 GPH and operating pressures ranging from 94.3 to 137.8 PSI, it supports the fuel system requirements of vehicles such as the Ford E-350 Super Duty and F-250 Super Duty. The pump features a threaded male inlet sized 3\/4-16 unf-2a and a quick connect outlet measuring 0.311 inches, facilitating straightforward integration into existing fuel lines. The included FKM gasket ensures a reliable seal, reducing the risk of leaks. The pump operates at an average current draw of 7.5 amps, balancing power consumption with performance. This model does not include a regulator or strainer but comes with a complete pump and installation kit.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or weak fuel pumps in Ford E-350 Econoline and Club Wagon models\u003c\/li\u003e\n\u003cli\u003eRestores proper fuel pressure in Ford F-250 and F-350 Super Duty trucks\u003c\/li\u003e\n\u003cli\u003eSolves fuel delivery interruptions causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eAddresses fuel pump noise or inconsistent flow problems\u003c\/li\u003e\n\u003cli\u003eSupports fuel system maintenance for Ford Excursion vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned for external mounting; verify compatibility with your vehicle’s fuel system layout\u003c\/li\u003e\n\u003cli\u003eIncludes FKM gasket for sealing; ensure proper gasket placement during installation\u003c\/li\u003e\n\u003cli\u003eThreaded male inlet and quick connect outlet require matching fuel line fittings\u003c\/li\u003e\n\u003cli\u003eNo special installation warnings; standard electrical and fuel safety precautions apply\u003c\/li\u003e\n\u003cli\u003eCheck electrical connections for secure male terminals (2 terminals, thread type)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest Electric Fuel Pump F1247 is manufactured to meet OEM specifications and is available to order with assured quality standards. While specific warranty details are not provided, Autobest products typically undergo rigorous testing to ensure durability and performance in demanding automotive applications.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790103733,"sku":"FKDT-F1247","price":60.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1247_Fro.jpg?v=1774704988"},{"product_id":"autobest-f1248a-fuel-pump-and-sender-assembly","title":"Autobest F1248A Fuel Pump and Sender Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump and Sender Assembly F1248A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly F1248A is designed for reliable fuel delivery in Ford trucks, including the F-150, F-150 Heritage, and F-250 models. This in-tank fuel pump assembly combines a fuel pump and sending unit to ensure accurate fuel level readings and consistent fuel flow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 5.8 amps\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 145 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eConnector: 1 male round connector\u003c\/li\u003e\n\u003cli\u003eFuel sending unit included for precise fuel level monitoring\u003c\/li\u003e\n\u003cli\u003eGasket included, made from NBR material for durability\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 109 PSI; minimum pump pressure: 80 PSI\u003c\/li\u003e\n\u003cli\u003eInlet size: 0.433 inches with an external strainer\u003c\/li\u003e\n\u003cli\u003eOutlet size: 3\/8 inch quick connect\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Fuel Pump and Sender Assembly Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump and Sender Assembly product line integrates both the fuel pump and sending unit into a single assembly, streamlining installation and ensuring compatibility. This line focuses on performance-grade components suitable for maintaining proper fuel delivery and accurate fuel level readings in compatible vehicles. The F1248A model exemplifies this approach by combining essential fuel system parts into one unit designed for Ford trucks.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1248A fuel pump and sender assembly is engineered to provide consistent fuel flow with an average rating of 145 GPH, supporting engine performance in Ford F-150, F-150 Heritage, and F-250 trucks. Operating at an average current draw of 5.8 amps, it maintains fuel pressure between 80 and 109 PSI. The assembly features a single male round connector and includes a fuel sending unit for accurate fuel level measurement. The external strainer inlet helps protect the pump from debris, while the included NBR gasket ensures a secure seal during installation. The outlet uses a 3\/8 inch quick connect fitting for straightforward fuel line attachment.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or weak fuel pumps causing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eResolving inaccurate fuel gauge readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eAddressing fuel delivery problems in Ford F-150, F-150 Heritage, and F-250 trucks\u003c\/li\u003e\n\u003cli\u003eFixing low fuel pressure issues that affect engine performance\u003c\/li\u003e\n\u003cli\u003eUpgrading to a performance-grade fuel pump assembly for consistent operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThis fuel pump and sender assembly is designed for in-tank installation and does not include mounting hardware. The included NBR gasket should be used to ensure a proper seal. No special installation warnings are noted, but it is recommended to follow vehicle-specific service manuals for safe removal and installation. The external strainer should be checked for debris during installation to maintain optimal fuel flow.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest F1248A fuel pump and sender assembly is performance-grade and available to order. While specific warranty details are not provided, Autobest products typically meet industry standards for durability and reliability. The inclusion of a fuel sending unit and gasket reflects attention to comprehensive fuel system maintenance.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790136501,"sku":"FKDT-F1248A","price":87.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1248A_Fro.jpg?v=1774704988"},{"product_id":"autobest-f1249a-fuel-pump-module-assembly","title":"Autobest F1249A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1249A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1249A is designed specifically for Ford F-250 Super Duty and F-350 Super Duty models. This in-tank fuel pump module ensures reliable fuel delivery with a performance-grade design tailored to meet the demands of heavy-duty trucks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 7 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 32 gallons per hour (GPH) to support engine performance\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for accurate fuel level readings and secure sealing\u003c\/li\u003e\n\u003cli\u003eConstructed with POM housing material for durability and resistance to fuel corrosion\u003c\/li\u003e\n\u003cli\u003eFeatures both internal and external strainers for enhanced fuel filtration\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford F-250 Super Duty and F-350 Super Duty models\u003c\/li\u003e\n\u003cli\u003eConnector: single male round connector with quick connect outlet (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003eOperates within a pump pressure range of 80 to 100 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Fuel Pump Module Assembly Line\u003c\/h2\u003e\u003cp\u003eThe Fuel Pump Module Assembly line by Autobest focuses on delivering integrated fuel pump solutions that combine the pump, sending unit, and sealing components into a single module. This approach simplifies installation and ensures compatibility with specific vehicle models. The F1249A model exemplifies this by including a fuel sending unit and NBR gasket, providing a complete assembly designed for performance and reliability in Ford Super Duty trucks.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Autobest F1249A fuel pump module assembly is engineered as an in-tank unit, which helps maintain consistent fuel pressure and flow to the engine. With an average flow rating of 32 GPH and a pressure range between 80 and 100 PSI, it supports the fuel demands of Ford F-250 and F-350 Super Duty trucks. The module features a durable POM housing and includes both internal and external strainers to protect the fuel system from contaminants. The single male round connector and quick connect outlet ensure straightforward electrical and fuel line connections. Additionally, the included fuel sending unit provides accurate fuel level data to the vehicle’s gauge cluster.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Ford F-250 and F-350 Super Duty trucks\u003c\/li\u003e\n\u003cli\u003eRestores proper fuel pressure and flow to prevent engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate fuel gauge readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eEliminates fuel delivery interruptions caused by clogged or damaged strainers\u003c\/li\u003e\n\u003cli\u003eAddresses fuel leaks by providing a new NBR gasket seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe F1249A fuel pump module assembly is designed for direct replacement in compatible Ford Super Duty models. No special installation warnings are noted, but it is recommended to relieve fuel system pressure before removal. Ensure all electrical and fuel line connections are secure, and replace any mounting hardware if necessary, as it is not included with this assembly. Proper sealing with the included NBR gasket is essential to prevent leaks.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAutobest provides this Fuel Pump Module Assembly as a performance-grade component manufactured to meet OEM specifications. The product is available to order and undergoes quality checks to ensure reliability. While specific warranty details are not provided, Autobest parts typically come with a limited warranty covering defects in materials and workmanship.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790202037,"sku":"FKDT-F1249A","price":120.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1249A_Fro.jpg?v=1774704989"},{"product_id":"autobest-f1254a-fuel-pump-module-assembly","title":"Autobest F1254A Fuel Pump Module Assembly","description":"\u003ch2\u003eReliable Fuel Pump Module Assembly for Ford Taurus and Mercury Sable\u003c\/h2\u003e\u003cp\u003eThe Autobest F1254A fuel pump module assembly is engineered to provide consistent fuel delivery for Ford Taurus and Mercury Sable models. Designed as an in-tank unit, this performance-grade fuel pump module ensures efficient operation with integrated components for a streamlined installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 5.8 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eAverage flow rating of 29 gallons per hour (GPH) to meet fuel demand\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for accurate fuel level readings and secure sealing\u003c\/li\u003e\n\u003cli\u003eFeatures both external and internal strainers with a 0.433-inch inlet size for effective fuel filtration\u003c\/li\u003e\n\u003cli\u003eConnector configuration includes two connectors with male and female genders in rectangle and round shapes\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum pressure of 80 PSI for stable fuel system performance\u003c\/li\u003e\n\u003cli\u003eConstructed with POM housing material for durability in an in-tank environment\u003c\/li\u003e\n\u003cli\u003eQuick connect 3\/8-inch outlet for straightforward fuel line attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Overview of the Autobest F1254A Fuel Pump Module\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is designed specifically for Ford Taurus and Mercury Sable vehicles, providing a reliable fuel supply with a performance-grade design. The unit operates with an average current draw of 5.8 amps and delivers a steady flow rate of 29 GPH, suitable for maintaining optimal engine performance. The inclusion of both internal and external strainers helps protect the fuel system from contaminants, while the integrated fuel sending unit allows for accurate fuel level monitoring. The module’s POM housing material offers resistance to fuel and heat, ensuring longevity within the fuel tank. The quick connect outlet and dual connector setup simplify installation and electrical connections.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces failing or noisy fuel pumps in Ford Taurus and Mercury Sable models\u003c\/li\u003e\n\u003cli\u003eAddresses inconsistent fuel pressure or flow issues causing engine hesitation\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate fuel gauge readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks by providing a new NBR gasket seal\u003c\/li\u003e\n\u003cli\u003eImproves fuel system reliability in vehicles experiencing stalling or poor acceleration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1254A is an in-tank fuel pump module assembly designed for direct replacement in compatible Ford Taurus and Mercury Sable vehicles. No special installation warnings are noted, but it is recommended to relieve fuel system pressure before removal. Ensure connectors match the male and female rectangle and round shapes for proper electrical connection. The included NBR gasket should be installed to prevent leaks. Mounting hardware is not included, so reuse existing hardware or source appropriate fasteners. Verify fuel line quick connect fittings are secure after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1254A fuel pump module assembly meets performance-grade standards for durability and function. The product is available to order and includes a fuel sending unit and gasket for comprehensive replacement. While specific warranty details are not provided, Autobest products typically adhere to industry quality controls to ensure reliable operation within specified parameters.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790267573,"sku":"FKDT-F1254A","price":103.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1254A_Fro.jpg?v=1774704989"},{"product_id":"autobest-f1255a-fuel-pump-module-assembly","title":"Autobest F1255A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1255A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1255A is designed specifically for Ford Mustang models, providing reliable in-tank fuel delivery. Engineered for performance applications, this fuel pump module ensures consistent fuel flow and pressure to support your vehicle's engine demands.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 9 amps for efficient power consumption\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 45 gallons per hour (GPH) suitable for performance needs\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eConstructed with durable POM housing material\u003c\/li\u003e\n\u003cli\u003eFeatures both internal and external strainers for fuel filtration\u003c\/li\u003e\n\u003cli\u003eConnector configuration includes two connectors with male and female genders in rectangle and round shapes\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum pressure of 80 PSI\u003c\/li\u003e\n\u003cli\u003eInlet size of 0.433 inches with strainer type inlet and quick connect outlet of 3\/8 inch\u003c\/li\u003e\n\u003cli\u003eDesigned as an in-tank fuel pump module assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Autobest F1255A fuel pump module assembly is built with a POM housing that offers durability and resistance to fuel corrosion. It operates with an average current draw of 9 amps, balancing power efficiency and performance. The module includes a fuel sending unit, allowing accurate fuel level readings, and comes with an NBR gasket to ensure a secure seal within the fuel tank. Both internal and external strainers are integrated to protect the fuel system from contaminants. The fuel pump delivers a flow rate of 45 GPH, maintaining fuel pressure between 80 and 100 PSI, which is critical for consistent engine performance in Ford Mustang vehicles.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is compatible with Ford Mustang models requiring part number F1255A. It is designed for in-tank installation and supports performance-grade fuel delivery systems. The module is suitable for addressing common fuel system issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent or weak fuel delivery causing engine hesitation\u003c\/li\u003e\n\u003cli\u003eInaccurate fuel level readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eFuel leaks or pressure loss from worn gaskets or seals\u003c\/li\u003e\n\u003cli\u003eFuel contamination affecting pump operation\u003c\/li\u003e\n\u003cli\u003eFailure of original equipment fuel pump modules in performance applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe Autobest F1255A fuel pump module assembly is designed for straightforward in-tank installation with no special warnings. It includes the pump and module but does not come with mounting hardware, so ensure existing hardware is in good condition or replaced as needed. The connectors feature male and female genders with rectangle and round shapes, requiring proper alignment during installation. The quick connect outlet simplifies fuel line attachment. Always verify compatibility with your specific Ford Mustang model before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured in China, the Autobest F1255A fuel pump module assembly meets performance-grade standards for durability and reliability. The product is available to order and includes a gasket or seal made from NBR material to maintain fuel system integrity. While specific warranty details are not provided, Autobest products typically adhere to industry quality controls to ensure consistent operation in automotive fuel delivery systems.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790365877,"sku":"FKDT-F1255A","price":111.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1255A_Fro.jpg?v=1774704990"},{"product_id":"autobest-f1256a-fuel-pump-module-assembly","title":"Autobest F1256A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1256A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1256A is designed specifically for Ford F-250, F-250 Super Duty, and F-350 Super Duty models. This in-tank fuel pump module ensures reliable fuel delivery with a performance-grade design tailored to meet the demands of these heavy-duty trucks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 7.5 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 34 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eConstructed with durable POM housing material\u003c\/li\u003e\n\u003cli\u003eFeatures both internal and external strainers for fuel filtration\u003c\/li\u003e\n\u003cli\u003eCompatible with quick connect 3\/8 inch outlet and 0.433 inch strainer inlet\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation with a round, male connector\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum of 80 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Fuel Pump Module Assembly Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly product line focuses on delivering performance-grade fuel delivery components. This line integrates essential parts such as the fuel pump and sending unit into a single module, simplifying installation and ensuring compatibility with specific vehicle models. The F1256A model exemplifies this approach by combining reliable fuel flow and pressure control with durable materials and precise fitment for Ford Super Duty trucks.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1256A fuel pump module assembly is engineered for in-tank installation, providing consistent fuel pressure between 80 and 100 PSI to support engine performance in Ford F-250 and F-350 Super Duty trucks. Its 7.5 amp average current draw balances power consumption and efficiency, while the 34 GPH flow rating meets the fuel demands of heavy-duty applications. The module includes a fuel sending unit for accurate fuel level readings and a NBR gasket to ensure a secure seal within the fuel tank. The housing is made from POM, a durable polymer that withstands harsh fuel environments. Both internal and external strainers help protect the fuel system from contaminants, and the quick connect outlet simplifies hose attachment during installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fuel delivery in Ford F-250 and F-350 Super Duty trucks\u003c\/li\u003e\n\u003cli\u003eResolves fuel pressure inconsistencies causing engine performance issues\u003c\/li\u003e\n\u003cli\u003eReplaces faulty fuel sending units affecting fuel gauge accuracy\u003c\/li\u003e\n\u003cli\u003eAddresses fuel pump failures leading to engine stalling or no-start conditions\u003c\/li\u003e\n\u003cli\u003eEliminates fuel contamination problems with integrated strainers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe F1256A module is designed for direct replacement in compatible Ford Super Duty models. It features a single male round connector and quick connect outlet for straightforward electrical and fuel line connections. No mounting hardware is included, so retain original components during removal. The included NBR gasket should be inspected and replaced to ensure a proper seal. No special installation warnings are noted, but standard safety precautions when working with fuel systems should be followed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is manufactured to meet performance-grade standards and is available to order with consistent quality. While specific warranty details are not provided, Autobest products typically adhere to industry quality controls to ensure reliable operation in Ford F-250, F-250 Super Duty, and F-350 Super Duty trucks.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790398645,"sku":"FKDT-F1256A","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1256A_Fro.jpg?v=1774704990"},{"product_id":"autobest-f1257a-fuel-pump-module-assembly","title":"Autobest F1257A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1257A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1257A is engineered for reliable fuel delivery in Ford Escort and Mercury Tracer vehicles. Designed as an in-tank fuel pump module, it ensures consistent fuel flow and pressure to support engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw: 8 Amps\u003c\/li\u003e\n\u003cli\u003eAverage flow rating: 34 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket\/seal\u003c\/li\u003e\n\u003cli\u003eConnector: 1 male rectangular connector\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure: 100 PSI; minimum pump pressure: 80 PSI\u003c\/li\u003e\n\u003cli\u003eHousing made of durable POM material\u003c\/li\u003e\n\u003cli\u003eExternal and internal strainers for fuel filtration\u003c\/li\u003e\n\u003cli\u003eOutlet: single 3\/8 inch quick connect\u003c\/li\u003e\n\u003cli\u003eInlet size: 0.433 inch with strainer type\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Autobest Fuel Pump Module Assembly Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly product line focuses on performance-grade fuel delivery components. This line integrates essential features such as fuel sending units and high-quality seals to maintain fuel system integrity. The F1257A model exemplifies this approach by combining efficient flow rates with durable materials suitable for in-tank applications.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1257A fuel pump module assembly is specifically designed for Ford Escort and Mercury Tracer models, providing a reliable fuel supply with an average flow rating of 34 GPH and operating between 80 to 100 PSI pump pressure. Its POM housing material offers resistance to fuel corrosion, while the included NBR gasket ensures a secure seal within the fuel tank. The module features both internal and external strainers to protect the fuel system from contaminants. The single male rectangular connector simplifies electrical connections, and the quick connect outlet facilitates straightforward fuel line attachment. This assembly does not include a fuel filter or tank pressure sensor but comes with the necessary fuel sending unit for accurate fuel level readings.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Ford Escort and Mercury Tracer\u003c\/li\u003e\n\u003cli\u003eRestores proper fuel pressure and flow to improve engine performance\u003c\/li\u003e\n\u003cli\u003eAddresses fuel level sending unit malfunctions for accurate gauge readings\u003c\/li\u003e\n\u003cli\u003eEliminates fuel delivery interruptions caused by clogged strainers\u003c\/li\u003e\n\u003cli\u003eSeals fuel tank openings to prevent leaks and vapor loss\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThe F1257A is designed for in-tank installation with no special mounting hardware included. Ensure the fuel tank is properly drained and depressurized before removal. The included NBR gasket should be inspected and replaced if damaged during installation to maintain a proper seal. Electrical connections use a single male rectangular connector; verify compatibility with vehicle wiring harness. No specific installation warnings are noted, but following manufacturer service guidelines is recommended.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is manufactured to meet performance-grade standards and is available to order. It includes a fuel sending unit and gasket to ensure system integrity. While specific warranty details are not provided, Autobest products typically adhere to industry quality controls to support reliable operation in Ford Escort and Mercury Tracer vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790464181,"sku":"FKDT-F1257A","price":110.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1257A_Fro.jpg?v=1774704990"},{"product_id":"autobest-f1259a-fuel-pump-module-assembly","title":"Autobest F1259A Fuel Pump Module Assembly","description":"\u003ch2\u003eOverview of Autobest Fuel Pump Module Assembly F1259A\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1259A is designed specifically for Ford Windstar vehicles, providing reliable fuel delivery performance. This in-tank fuel pump module ensures consistent fuel flow and pressure to support your vehicle's engine needs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAverage current draw of 7 amps for efficient operation\u003c\/li\u003e\n\u003cli\u003eFuel flow rating of 34 gallons per hour (GPH)\u003c\/li\u003e\n\u003cli\u003eIncludes fuel sending unit and NBR gasket for proper sealing\u003c\/li\u003e\n\u003cli\u003eFeatures both external and internal strainers for fuel filtration\u003c\/li\u003e\n\u003cli\u003eConnector configuration: 2 connectors with male and female genders, rectangle and round shapes\u003c\/li\u003e\n\u003cli\u003eMaximum pump pressure of 100 PSI and minimum pressure of 80 PSI\u003c\/li\u003e\n\u003cli\u003eConstructed with durable POM housing material\u003c\/li\u003e\n\u003cli\u003eQuick connect outlet with 3\/8 inch size for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Fuel Pump Module Assembly Product Line\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly product line focuses on performance-grade fuel delivery components designed to meet or exceed OEM specifications. This line integrates the fuel pump, sending unit, and necessary seals into a single module, simplifying replacement and ensuring compatibility with specific vehicle models such as the Ford Windstar. The F1259A model exemplifies this approach by combining essential features like dual strainers and a reliable fuel sending unit to maintain accurate fuel level readings and consistent fuel pressure.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe F1259A fuel pump module assembly is engineered for in-tank installation, providing a compact and efficient solution for fuel delivery in the Ford Windstar. It operates with an average current draw of 7 amps and delivers a steady fuel flow of 34 GPH, supporting engine performance under various driving conditions. The module includes both internal and external strainers to protect the fuel system from contaminants, although it does not include a fuel filter. The included fuel sending unit allows for accurate fuel level monitoring, while the NBR gasket ensures a secure seal to prevent leaks. The housing is made from POM material, known for its durability and resistance to fuel exposure. Connectors are designed with both male and female ends in rectangle and round shapes, facilitating proper electrical connections. The quick connect outlet with a 3\/8 inch size simplifies fuel line attachment.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for failing or noisy fuel pumps in Ford Windstar models\u003c\/li\u003e\n\u003cli\u003eRestores proper fuel pressure when experiencing engine hesitation or stalling\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate fuel gauge readings due to faulty sending units\u003c\/li\u003e\n\u003cli\u003eEliminates fuel delivery interruptions caused by clogged or damaged strainers\u003c\/li\u003e\n\u003cli\u003ePrevents fuel leaks with included NBR gasket for secure sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThis fuel pump module assembly is designed for direct replacement in the Ford Windstar fuel tank. No special installation warnings are noted, but it is recommended to handle the module carefully to avoid damage to the connectors and strainers. Ensure the gasket is properly seated to prevent leaks. Since mounting hardware is not included, reuse existing hardware or acquire compatible fasteners as needed. Verify electrical connections match the male and female connectors to ensure proper function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Autobest Fuel Pump Module Assembly F1259A is manufactured to meet performance-grade standards, ensuring reliable operation within specified pressure and flow ratings. The product is available to order and includes a gasket for installation. While specific warranty details are not provided, Autobest products typically adhere to industry quality controls to support durability and fitment accuracy for Ford Windstar vehicles.\u003c\/p\u003e","brand":"Autobest","offers":[{"title":"Default Title","offer_id":43385790529717,"sku":"FKDT-F1259A","price":109.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A0_F1259A_Fro.jpg?v=1774704991"}],"url":"https:\/\/www.partcatalog.com\/collections\/fuel-pumps-and-related-components.oembed?page=72","provider":"PartCatalog","version":"1.0","type":"link"}