{"title":"Air and Fuel Delivery \u003e Gaskets and Sealing Systems","description":"\u003cp\u003eAir and fuel delivery gaskets and seals keep your intake system airtight from the throttle body and plenum down to the fuel pump and injectors. A failed throttle body mounting gasket or plenum gasket introduces unmetered air, leaning out the mixture and triggering rough idle, hesitation, and stored lean codes. Fuel-side seals — injector O-rings, fuel pump gaskets, and tank sending unit seals — degrade from ethanol exposure and heat cycling, leading to fuel odor, pressure loss, or visible weeping. Most of these are maintenance items replaced during throttle body cleaning, injector service, or fuel pump replacement rather than on a fixed interval. When buying, confirm gasket thickness and material (rubber-coated steel vs. fiber vs. silicone) matches OEM spec — particularly on turbocharged and supercharged applications where boost pressure and heat cycles are hard on inferior materials. Always verify fitment by engine code, not just year\/make\/model.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRough idle or erratic RPM at idle\u003c\/strong\u003e — A cracked or compressed throttle body or plenum gasket allows unmetered air past the throttle plate, leaning out the idle mixture and causing hunting or surging that often worsens when the engine is cold.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLean fault codes (P0171, P0174) with no obvious vacuum leak\u003c\/strong\u003e — If smoke testing doesn't reveal a cracked hose, a failed throttle body mounting gasket or plenum gasket is often the culprit, particularly on high-mileage engines where the mating surfaces have corroded or warped slightly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFuel smell inside or under the vehicle\u003c\/strong\u003e — Degraded injector O-rings, fuel pump tank seals, or sending unit gaskets allow raw fuel or vapor to escape. Any persistent fuel odor warrants immediate inspection before driving.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFuel pressure drops after key-on or fails to hold\u003c\/strong\u003e — A leaking fuel pump O-ring or pressure regulator seal allows the fuel rail to bleed down, causing hard starts and longer crank times after the vehicle sits overnight.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOil or coolant seeping from turbocharger connections\u003c\/strong\u003e — Turbocharger oil line gaskets, coolant line O-rings, and drain gaskets deteriorate from sustained heat above 400°F. Visible weeping at the turbo oil feed or return fitting is a sign the seal has lost its crush.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHesitation or stumble on acceleration after throttle body service\u003c\/strong\u003e — Reusing the original throttle body gasket after removal is a common mistake. A gasket that's been compressed once rarely seals correctly a second time and should be replaced any time the throttle body is pulled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo I need to replace the throttle body gasket every time I clean the throttle body?\u003c\/strong\u003e Best practice is yes — once a paper or fiber gasket has been compressed and exposed to heat cycles, it won't reliably re-seal. Rubber-coated steel OEM-style gaskets can sometimes be reused if undamaged, but at $5–$15 per gasket, replacement is cheap insurance against a post-service vacuum leak.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAre aftermarket plenum and throttle body gaskets as good as OEM?\u003c\/strong\u003e For most naturally aspirated engines, quality aftermarket gaskets from brands like Fel-Pro or Victor Reinz match OEM performance and are often less expensive. On turbocharged and supercharged applications, stick to OEM or OEM-equivalent materials — boost pressure and sustained heat expose weaknesses in lower-grade fiber or composite gaskets that hold up fine at atmospheric pressure.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat else should I replace when swapping a fuel pump and its gasket?\u003c\/strong\u003e Replace the tank seal or O-ring, the sending unit gasket, and the fuel pump strainer as a set — they're accessible at the same time and share the same failure modes. Injector O-rings and the fuel pressure regulator O-ring are also worth doing if the rail is coming off, since labor is the bulk of the cost on most platforms. Budget $20–$60 for a complete fuel-side seal refresh.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"beck-arnley-037-4854-fuel-injection-plenum-gasket","title":"Beck Arnley 037-4854 Fuel Injection Plenum Gasket","description":"\u003ch2\u003eReliable Fuel Injection Plenum Gasket for Acura, Honda, and Isuzu\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 037-4854 fuel injection plenum gasket is designed to provide a precise seal for your vehicle's intake system. Compatible with select Acura, Honda, and Isuzu models, this gasket helps maintain optimal engine performance by preventing air and fuel leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura, Honda, and Isuzu vehicles including Amigo, Axiom, Passport, Rodeo, Rodeo Sport, SLX, Trooper, and VehiCROSS\u003c\/li\u003e\n\u003cli\u003ePart number 037-4854 ensures exact fit and reliable sealing\u003c\/li\u003e\n\u003cli\u003eConstructed to withstand high temperatures and pressure in the intake manifold\u003c\/li\u003e\n\u003cli\u003ePrevents vacuum leaks and maintains proper air-fuel mixture\u003c\/li\u003e\n\u003cli\u003eDurable material designed for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection plenum gasket from Beck Arnley is engineered to meet or exceed OEM specifications for a secure seal between the intake manifold and the cylinder head. The gasket is specifically compatible with Acura, Honda, and Isuzu models such as the Amigo, Axiom, Passport, Rodeo, Rodeo Sport, SLX, Trooper, and VehiCROSS. Using part number 037-4854 ensures you receive the correct gasket designed for your vehicle’s fuel injection system, helping to maintain engine efficiency and reduce emissions.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates vacuum leaks that cause rough idling or engine hesitation\u003c\/li\u003e\n\u003cli\u003ePrevents fuel and air mixture inconsistencies affecting engine performance\u003c\/li\u003e\n\u003cli\u003eStops coolant or oil leaks around the intake manifold area\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine misfires related to intake sealing issues\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper engine temperature by sealing coolant passages\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 037-4854 fuel injection plenum gasket, ensure the mating surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping the intake manifold or damaging the gasket. It is recommended to inspect the intake manifold and surrounding components for wear or damage during installation to ensure a complete and effective seal.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet strict quality standards, providing reliable performance and durability. The 037-4854 fuel injection plenum gasket undergoes rigorous testing to ensure it meets OEM fit and function requirements. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term vehicle operation.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388269985973,"sku":"BBGB-037-4854","price":26.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0374854_Oth.jpg?v=1774710098"},{"product_id":"beck-arnley-037-4856-fuel-injection-plenum-gasket","title":"Beck Arnley 037-4856 Fuel Injection Plenum Gasket","description":"\u003ch2\u003eReliable Fuel Injection Plenum Gasket for Mazda Miata\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 037-4856 fuel injection plenum gasket is designed specifically for Mazda Miata models. This gasket ensures a secure seal between the fuel injection plenum and the intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mazda Miata fuel injection systems\u003c\/li\u003e\n\u003cli\u003ePart number 037-4856 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand engine heat and pressure\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks in the intake manifold area\u003c\/li\u003e\n\u003cli\u003eEngineered to meet OEM specifications for fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 037-4856 fuel injection plenum gasket is manufactured to provide a reliable seal in the air and fuel delivery system of Mazda Miata vehicles. This gasket is critical in preventing vacuum leaks and ensuring the proper mixture of air and fuel reaches the engine cylinders. Its design and materials are selected to resist degradation from heat, fuel, and engine vibrations, contributing to consistent engine performance and reduced emissions.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates vacuum leaks causing rough idle or stalling\u003c\/li\u003e\n\u003cli\u003ePrevents fuel leaks that can lead to poor fuel economy\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel mixture for engine efficiency\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine misfires related to intake leaks\u003c\/li\u003e\n\u003cli\u003eSupports stable engine performance under various driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 037-4856 gasket on a Mazda Miata, ensure the mating surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid over-tightening, which can damage the gasket or cause leaks. It is recommended to inspect the intake manifold and plenum for any signs of wear or damage during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are engineered to meet or exceed OEM standards, providing reliable performance and durability. The 037-4856 fuel injection plenum gasket undergoes rigorous quality control to ensure proper fit and function. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support customer confidence in their products.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388270051509,"sku":"BBGB-037-4856","price":16.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0374856_Oth.jpg?v=1774710098"},{"product_id":"beck-arnley-037-4859-fuel-injection-plenum-gasket-set","title":"Beck Arnley 037-4859 Fuel Injection Plenum Gasket Set","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Plenum Gasket Set\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 037-4859 Fuel Injection Plenum Gasket Set is designed specifically for Mazda vehicles, including the Mazda 6 and Mazda Tribute models. This gasket set ensures a proper seal in the air and fuel delivery system, helping maintain engine performance and efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mazda 6 and Mazda Tribute models\u003c\/li\u003e\n\u003cli\u003ePart number 037-4859 for precise identification\u003c\/li\u003e\n\u003cli\u003eDesigned for fuel injection plenum sealing applications\u003c\/li\u003e\n\u003cli\u003eManufactured to meet OEM specifications\u003c\/li\u003e\n\u003cli\u003eDurable materials to withstand engine conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis fuel injection plenum gasket set from Beck Arnley is engineered to provide a reliable seal between the intake manifold and the cylinder head. The gasket set prevents air and fuel leaks that can affect engine performance. With part number 037-4859, this gasket set is tailored for use in Mazda 6 and Mazda Tribute vehicles, ensuring compatibility and proper fitment. The materials used in this gasket set are selected to resist heat and chemical exposure common in the engine environment, contributing to long-lasting durability.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks in the intake manifold\u003c\/li\u003e\n\u003cli\u003eEliminates fuel injection plenum air leaks\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel mixture for combustion\u003c\/li\u003e\n\u003cli\u003eReduces rough idling and engine hesitation\u003c\/li\u003e\n\u003cli\u003ePrevents check engine light triggers related to intake leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 037-4859 Fuel Injection Plenum Gasket Set, ensure the mating surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the intake manifold and related components for any signs of wear or damage during installation. Using the correct tools and following the vehicle manufacturer’s service manual will help achieve a secure and leak-free installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance for Mazda 6 and Mazda Tribute vehicles. The 037-4859 Fuel Injection Plenum Gasket Set undergoes strict quality control to ensure durability and fitment accuracy. While specific warranty details may vary, Beck Arnley typically offers a limited warranty against defects in materials and workmanship, supporting confidence in the product’s quality.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388270117045,"sku":"BBGB-037-4859","price":17.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0374859_Oth.jpg?v=1774710099"},{"product_id":"beck-arnley-037-4865-fuel-injection-plenum-gasket","title":"Beck Arnley 037-4865 Fuel Injection Plenum Gasket","description":"\u003ch2\u003eReliable Fuel Injection Plenum Gasket for Hyundai and Kia Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 037-4865 fuel injection plenum gasket is designed to provide a secure seal for the intake manifold in select Hyundai and Kia models. This gasket helps maintain proper air and fuel delivery, ensuring engine efficiency and performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Hyundai Amanti, Azera, Santa Fe, Veracruz\u003c\/li\u003e\n\u003cli\u003eCompatible with Kia Entourage, Sedona, Sorento\u003c\/li\u003e\n\u003cli\u003ePart number 037-4865 for precise fitment\u003c\/li\u003e\n\u003cli\u003eConstructed to withstand high temperatures and pressure\u003c\/li\u003e\n\u003cli\u003eEnsures airtight seal to prevent vacuum leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection plenum gasket from Beck Arnley is engineered to meet OEM specifications for a reliable seal between the intake manifold and cylinder head. It is compatible with a range of Hyundai and Kia vehicles, including the Hyundai Amanti, Azera, Santa Fe, and Veracruz, as well as the Kia Entourage, Sedona, and Sorento. The gasket is designed to resist heat and chemical exposure common in the engine environment, helping to maintain optimal air and fuel mixture delivery.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or engine hesitation\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks that may trigger check engine lights\u003c\/li\u003e\n\u003cli\u003eMaintains proper fuel injection system performance\u003c\/li\u003e\n\u003cli\u003eHelps avoid engine misfires related to intake manifold sealing\u003c\/li\u003e\n\u003cli\u003eReduces risk of coolant or oil leaks in gasket area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 037-4865 fuel injection plenum gasket, ensure the mating surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damage to the gasket. It is recommended to inspect the intake manifold and surrounding components for wear or damage during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 037-4865 fuel injection plenum gasket undergoes rigorous quality control to ensure proper fit and function. Warranty coverage details are available through Beck Arnley and may vary by region.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388270149813,"sku":"BBGB-037-4865","price":14.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0374865_Oth.jpg?v=1774710100"},{"product_id":"beck-arnley-037-4878-fuel-injection-plenum-gasket","title":"Beck Arnley 037-4878 Fuel Injection Plenum Gasket - Right Upper","description":"\u003ch2\u003eReliable Fuel Injection Plenum Gasket for Acura and Honda\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 037-4878 fuel injection plenum gasket is designed to provide a precise seal for your vehicle's intake system. Compatible with select Acura and Honda models, this gasket ensures proper air and fuel delivery by preventing leaks and maintaining engine efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura Accord and Honda Accord and CL models\u003c\/li\u003e\n\u003cli\u003ePart number 037-4878 for accurate identification\u003c\/li\u003e\n\u003cli\u003eConstructed to withstand high temperatures and pressure\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal between the fuel injection plenum and intake manifold\u003c\/li\u003e\n\u003cli\u003eHelps maintain optimal engine performance and fuel efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection plenum gasket from Beck Arnley is engineered to meet OEM specifications for Acura and Honda vehicles, specifically the Accord and CL models. The gasket plays a critical role in sealing the interface between the fuel injection plenum and the intake manifold, preventing air and fuel leaks that can lead to engine performance issues. Using part number 037-4878 guarantees compatibility and proper fitment for these vehicles, helping maintain the integrity of the air and fuel delivery system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel odor caused by gasket failure\u003c\/li\u003e\n\u003cli\u003eReduces engine misfires related to air\/fuel mixture inconsistencies\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers due to intake leaks\u003c\/li\u003e\n\u003cli\u003eMaintains proper engine vacuum for efficient operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 037-4878 fuel injection plenum gasket, ensure the mating surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid over-tightening, which can damage the gasket or cause leaks. It is recommended to inspect the fuel injection plenum and intake manifold for any signs of wear or damage during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 037-4878 fuel injection plenum gasket undergoes rigorous quality control to ensure a precise fit and long-lasting seal. Warranty coverage details can be obtained from the manufacturer or authorized distributors.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388270346421,"sku":"BBGB-037-4878","price":12.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0374878_Oth.jpg?v=1774710102"},{"product_id":"beck-arnley-037-4879-fuel-injection-plenum-gasket","title":"Beck Arnley 037-4879 Fuel Injection Plenum Gasket - Left Upper","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Plenum Gasket 037-4879\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 037-4879 fuel injection plenum gasket is designed for precise fitment on Acura and Honda vehicles, specifically the Accord and CL models. This gasket ensures a reliable seal between the fuel injection plenum and the intake manifold, helping maintain optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura Accord and Honda CL models\u003c\/li\u003e\n\u003cli\u003ePart number 037-4879 for accurate identification\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a secure seal for fuel injection plenums\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent air and fuel leaks in the intake system\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted automotive parts brand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley fuel injection plenum gasket 037-4879 is engineered to meet OEM specifications for Acura and Honda vehicles, including the Accord and CL. This gasket plays a critical role in sealing the interface between the fuel injection plenum and the intake manifold, preventing vacuum leaks and ensuring consistent air-fuel mixture delivery. Proper sealing helps maintain engine efficiency, reduces emissions, and supports smooth engine operation. The gasket material is selected for durability and resistance to heat and chemical exposure common in the engine bay.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel odor caused by leaks at the plenum seal\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel ratio for engine performance\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine misfires related to intake leaks\u003c\/li\u003e\n\u003cli\u003eSupports emission control by maintaining intake system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mating surfaces of the intake manifold and plenum are clean and free of old gasket material\u003c\/li\u003e\n\u003cli\u003eUse appropriate torque specifications when securing the plenum to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the gasket for any defects before installation\u003c\/li\u003e\n\u003cli\u003eReplace the gasket if any signs of wear or damage are present during maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts, including the 037-4879 fuel injection plenum gasket, are manufactured to meet or exceed OEM standards. This gasket undergoes rigorous quality control to ensure reliable performance and fitment on Acura Accord and Honda CL models. While specific warranty details may vary, Beck Arnley typically offers coverage against manufacturing defects to provide confidence in product durability and function.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388270543029,"sku":"BBGB-037-4879","price":27.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0374879_Oth_f12ee0ca-192e-4bb5-988c-bc3442dc90d6.jpg?v=1774710102"},{"product_id":"beck-arnley-037-4883-fuel-injection-plenum-gasket","title":"Beck Arnley 037-4883 Fuel Injection Plenum Gasket","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Plenum Gasket 037-4883\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley Fuel Injection Plenum Gasket 037-4883 is designed for precise sealing in Lexus GS430, LS430, and SC430 models. This gasket ensures a reliable seal between the fuel injection plenum and intake manifold, helping maintain optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus GS430, LS430, and SC430 models\u003c\/li\u003e\n\u003cli\u003ePart number 037-4883 for accurate identification\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a secure seal for fuel injection plenums\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks that can affect engine efficiency\u003c\/li\u003e\n\u003cli\u003eManufactured to meet OEM specifications for fit and durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 037-4883 Fuel Injection Plenum Gasket is engineered to fit specific Lexus vehicles, including the GS430, LS430, and SC430. This gasket plays a critical role in sealing the interface between the fuel injection plenum and the intake manifold, preventing vacuum leaks and ensuring consistent air-fuel mixture delivery. Proper sealing helps maintain engine performance, fuel efficiency, and emissions control. The gasket is manufactured to meet or exceed original equipment standards, providing a reliable replacement part for maintenance or repair.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates vacuum leaks causing rough idle or stalling\u003c\/li\u003e\n\u003cli\u003ePrevents fuel vapor leaks that can trigger check engine lights\u003c\/li\u003e\n\u003cli\u003eResolves poor engine performance related to intake manifold sealing\u003c\/li\u003e\n\u003cli\u003eHelps avoid decreased fuel efficiency due to air leaks\u003c\/li\u003e\n\u003cli\u003eAddresses potential engine misfires linked to gasket failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure mating surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications to avoid gasket damage or leaks\u003c\/li\u003e\n\u003cli\u003eInspect the fuel injection plenum and intake manifold for warping or damage\u003c\/li\u003e\n\u003cli\u003eReplace any damaged bolts or hardware during installation\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet strict quality standards, ensuring reliable fit and function. The 037-4883 Fuel Injection Plenum Gasket undergoes rigorous testing to comply with OEM specifications. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, providing confidence in the product's durability and performance.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388270674101,"sku":"BBGB-037-4883","price":10.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0374883_Oth.jpg?v=1774710102"},{"product_id":"beck-arnley-037-4890-fuel-injection-plenum-gasket-set","title":"Beck Arnley 037-4890 Fuel Injection Plenum Gasket Set","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Plenum Gasket Set 037-4890\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley Fuel Injection Plenum Gasket Set 037-4890 is designed for precise sealing in Acura and Honda vehicles. This gasket set is compatible with models such as the Accord, Odyssey, and TL, ensuring reliable performance in your fuel delivery system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura and Honda Accord, Odyssey, and TL models\u003c\/li\u003e\n\u003cli\u003ePart number 037-4890 for accurate identification\u003c\/li\u003e\n\u003cli\u003eDesigned for fuel injection plenum sealing applications\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary gaskets for a complete seal\u003c\/li\u003e\n\u003cli\u003eManufactured to meet OEM specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis fuel injection plenum gasket set from Beck Arnley provides a critical seal between the intake manifold and the cylinder head. Proper sealing prevents air and fuel leaks that can affect engine performance and fuel efficiency. The gasket set 037-4890 is engineered to fit Acura and Honda vehicles, including the Accord, Odyssey, and TL, ensuring compatibility and ease of installation. Each gasket is made from durable materials designed to withstand heat and pressure within the engine environment.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel injection plenum air leaks that reduce engine efficiency\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to intake leaks\u003c\/li\u003e\n\u003cli\u003eMaintains proper air-fuel mixture for optimal combustion\u003c\/li\u003e\n\u003cli\u003ePrevents coolant or oil contamination in the intake manifold area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley Fuel Injection Plenum Gasket Set 037-4890, ensure the mating surfaces are clean and free of old gasket material or debris. Use proper torque specifications for the intake manifold bolts to avoid warping or damage. It is recommended to replace all gaskets in the set simultaneously to maintain a consistent seal. Verify compatibility with your specific Acura or Honda model year before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures this gasket set to meet or exceed OEM standards, providing reliable sealing performance. The part number 037-4890 undergoes rigorous quality control to ensure durability and fitment accuracy. While specific warranty details may vary, Beck Arnley products typically include a limited warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388270772405,"sku":"BBGB-037-4890","price":44.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0374890_Oth.jpg?v=1774710103"},{"product_id":"beck-arnley-039-5003-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5003 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5003 fuel injection throttle body mounting gasket is designed for precise fitment on select Nissan and INFINITI vehicles. This gasket ensures a secure seal between the throttle body and intake manifold, maintaining optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan 200SX, 240SX, Altima, Sentra, and INFINITI G20 models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5003 for accurate identification and replacement\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a reliable seal for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003eResistant to heat and fuel exposure for durability\u003c\/li\u003e\n\u003cli\u003eOEM-quality fit and function for consistent engine operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet or exceed original equipment specifications. It is manufactured to provide a tight seal that prevents air and fuel leaks at the throttle body interface. The gasket material is selected to withstand the thermal and chemical stresses typical in fuel delivery systems. The 039-5003 gasket is specifically designed for use on Nissan 200SX, 240SX, Altima, Sentra, and INFINITI G20 models, ensuring compatibility and ease of installation.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks at the throttle body mounting point\u003c\/li\u003e\n\u003cli\u003eMaintains proper air-fuel mixture for engine efficiency\u003c\/li\u003e\n\u003cli\u003eReduces risk of throttle body contamination from external debris\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air intake leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and intake manifold surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse the Beck Arnley 039-5003 gasket to maintain proper sealing and avoid air or fuel leaks\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to prevent gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the gasket for any damage or defects prior to installation\u003c\/li\u003e\n\u003cli\u003eRecommended for professional installation or by experienced technicians\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet stringent quality standards, providing reliable performance and durability. The 039-5003 fuel injection throttle body mounting gasket undergoes rigorous testing to ensure proper fit and function on compatible Nissan and INFINITI models. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship. Consult product documentation or authorized sources for exact warranty terms.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388275687605,"sku":"BBGB-039-5003","price":11.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395003_Oth.jpg?v=1774710175"},{"product_id":"beck-arnley-039-5006-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5006 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5006 fuel injection throttle body mounting gasket is designed for precise fitment on Honda Accord and Prelude models. With a gasket thickness of 0.50mm, this component ensures a reliable seal between the throttle body and intake manifold, maintaining optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Accord and Prelude models\u003c\/li\u003e\n\u003cli\u003eGasket thickness of 0.50mm for accurate sealing\u003c\/li\u003e\n\u003cli\u003ePart number 039-5006 for easy identification\u003c\/li\u003e\n\u003cli\u003eConstructed to withstand fuel and air delivery system conditions\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent air and fuel leaks at the throttle body mounting point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley provides a critical seal in the air and fuel delivery system of Honda Accord and Prelude vehicles. The 0.50mm thickness is engineered to maintain the correct spacing and prevent leaks that could affect engine idle, fuel efficiency, and emissions. The gasket is manufactured to meet OEM specifications, ensuring compatibility and durability under typical operating conditions. Using part number 039-5006 guarantees that the gasket matches the exact requirements for the throttle body mounting surface.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel vapor leaks that can trigger check engine lights\u003c\/li\u003e\n\u003cli\u003eMaintains proper throttle body alignment and sealing\u003c\/li\u003e\n\u003cli\u003eHelps avoid air-fuel mixture inconsistencies affecting engine performance\u003c\/li\u003e\n\u003cli\u003eReduces risk of throttle body gasket deterioration over time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5006 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. The 0.50mm thickness requires careful alignment to maintain the correct seal and prevent leaks. It is recommended to inspect the throttle body and related components for wear during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance for Honda Accord and Prelude vehicles. The 039-5006 fuel injection throttle body mounting gasket undergoes quality control checks to ensure consistent thickness and material integrity. While specific warranty details may vary, Beck Arnley typically offers coverage against manufacturing defects to support long-term use.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388275720373,"sku":"BBGB-039-5006","price":10.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395006_Oth.jpg?v=1774710175"},{"product_id":"beck-arnley-039-5007-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5007 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Mitsubishi Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5007 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Mitsubishi 3000GT, Galant, Montero, and other compatible models. This gasket ensures proper air and fuel delivery by preventing leaks and maintaining optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mitsubishi 3000GT, Expo, Expo LRV, Galant, Mighty Max, Montero, and Montero Sport\u003c\/li\u003e\n\u003cli\u003ePart number 039-5007 for precise fit and easy identification\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive gaskets and sealing systems\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal between the throttle body and intake manifold\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand engine heat and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket is specifically engineered for Mitsubishi vehicles including the 3000GT, Expo, Expo LRV, Galant, Mighty Max, Montero, and Montero Sport. The gasket fits between the throttle body and intake manifold, preventing air and fuel leaks that can affect engine efficiency. Beck Arnley’s 039-5007 gasket is made from materials designed to endure the thermal and mechanical stresses typical in fuel delivery systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eMaintains proper air-fuel mixture for improved engine response\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air intake leaks\u003c\/li\u003e\n\u003cli\u003eSupports consistent throttle body performance and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5007 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and related components for wear or damage during installation to maintain optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, ensuring reliable fit and function. The 039-5007 fuel injection throttle body mounting gasket undergoes rigorous quality control to provide consistent sealing performance. Warranty coverage details can be obtained from Beck Arnley or authorized distributors, reflecting the brand’s commitment to product reliability.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388275753141,"sku":"BBGB-039-5007","price":10.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395007_Oth_96c50002-403a-4694-9e3c-c7929d02349a.jpg?v=1774710175"},{"product_id":"beck-arnley-039-5011-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5011 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5011 fuel injection throttle body mounting gasket is designed specifically for Infiniti Q45 models. This gasket ensures a secure seal between the throttle body and intake manifold, maintaining optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Infiniti Q45 vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 039-5011 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a reliable seal for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks that can affect engine operation\u003c\/li\u003e\n\u003cli\u003eDurable material designed to withstand engine heat and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet OEM specifications for the Infiniti Q45. The gasket fits perfectly to ensure a tight seal, preventing vacuum leaks and maintaining proper air-fuel mixture. Its durable construction resists degradation from heat and chemical exposure, which is critical for maintaining throttle body performance over time. The part number 039-5011 helps ensure compatibility and ease of replacement during maintenance or repair.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cp\u003eThis gasket is used to seal the throttle body to the intake manifold in Infiniti Q45 vehicles. It helps resolve several common issues, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVacuum leaks causing rough idle or engine hesitation\u003c\/li\u003e\n\u003cli\u003eFuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eReduced engine performance due to improper air-fuel mixture\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by throttle body seal failure\u003c\/li\u003e\n\u003cli\u003eIncreased emissions from air leaks in the intake system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5011 gasket, ensure the mating surfaces of the throttle body and intake manifold are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and surrounding components for wear or damage during installation to maintain optimal engine function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance for Infiniti Q45 vehicles. The 039-5011 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and fitment accuracy. While specific warranty details may vary, Beck Arnley typically offers coverage against manufacturing defects to support long-term use.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388275851445,"sku":"BBGB-039-5011","price":12.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395011_Oth.jpg?v=1774710176"},{"product_id":"beck-arnley-039-5026-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5026 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Nissan D21 Pickup\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5026 fuel injection throttle body mounting gasket is designed to provide a precise seal for your Nissan D21 Pickup. With a gasket thickness of 0.35mm, this part ensures proper fitment and optimal performance in your vehicle's air and fuel delivery system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGasket thickness of 0.35mm for accurate sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Nissan D21 and Pickup models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5026 for easy identification\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted brand in automotive gaskets and sealing systems\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for fuel injection throttle body mounting applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision and Compatibility Details\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet the exact specifications required for Nissan D21 and Pickup models. The 0.35mm thickness is critical to maintaining the correct spacing and sealing between the throttle body and intake manifold, preventing air or fuel leaks that could affect engine performance. Using the correct gasket thickness helps maintain engine efficiency and reduces the risk of vacuum leaks.\u003c\/p\u003e\u003ch2\u003eApplication and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis gasket is used to create a secure seal between the throttle body and the intake manifold in Nissan D21 and Pickup vehicles. It addresses several common issues:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents air leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eMaintains proper throttle body alignment and spacing\u003c\/li\u003e\n\u003cli\u003eReduces the risk of engine performance issues related to improper sealing\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air intake leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5026 gasket, ensure the mating surfaces of the throttle body and intake manifold are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. The 0.35mm thickness is designed to fit precisely, so avoid using additional sealants unless specified by the vehicle manufacturer.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, ensuring reliable performance and durability. The 039-5026 fuel injection throttle body mounting gasket undergoes strict quality control to provide consistent thickness and material integrity. While specific warranty details may vary, Beck Arnley typically offers coverage against manufacturing defects to support long-term vehicle maintenance.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388275884213,"sku":"BBGB-039-5026","price":11.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395026_Oth.jpg?v=1774710177"},{"product_id":"beck-arnley-039-5028-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5028 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Honda Civic\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5028 fuel injection throttle body mounting gasket is designed specifically for Honda Civic models. This gasket ensures a precise seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGasket thickness of 0.50mm for accurate fit and sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Honda Civic fuel injection systems\u003c\/li\u003e\n\u003cli\u003eDurable material engineered to withstand heat and pressure\u003c\/li\u003e\n\u003cli\u003ePart number 039-5028 for easy identification and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Gasket Designed for Precise Sealing\u003c\/h2\u003e\u003cp\u003eThe 0.50mm thickness of this Beck Arnley fuel injection throttle body mounting gasket provides a reliable seal that prevents air and fuel leaks. Proper sealing is critical to maintaining the correct air-fuel mixture and engine vacuum, which directly impacts engine performance and emissions. This gasket is manufactured to meet OEM specifications, ensuring compatibility and durability under typical operating conditions found in Honda Civic vehicles.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Common Uses\u003c\/h2\u003e\u003cp\u003eThis gasket is compatible with Honda Civic models requiring a fuel injection throttle body mounting gasket. It is used to address issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAir leaks causing rough idle or engine hesitation\u003c\/li\u003e\n\u003cli\u003eFuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eLoss of engine vacuum affecting performance\u003c\/li\u003e\n\u003cli\u003eThrottle body mounting surface sealing failures\u003c\/li\u003e\n\u003cli\u003eReplacement during throttle body service or intake manifold repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5028 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. Using the correct gasket thickness of 0.50mm helps maintain the intended sealing pressure and prevents leaks.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and fitment. The 039-5028 gasket undergoes quality control inspections to ensure consistency and durability. While specific warranty details may vary, Beck Arnley typically offers coverage against manufacturing defects to support long-term use in Honda Civic vehicles.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388275916981,"sku":"BBGB-039-5028","price":10.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395028_Oth.jpg?v=1774710178"},{"product_id":"beck-arnley-039-5036-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5036 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5036 fuel injection throttle body mounting gasket is designed to provide a precise seal for Acura and Honda vehicles. Engineered with a gasket thickness of 0.55mm, this part ensures proper fitment and optimal performance for models like the Accord, CL, and Odyssey.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGasket thickness of 0.55mm for accurate sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Acura and Honda Accord, CL, and Odyssey models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5036 for easy identification and replacement\u003c\/li\u003e\n\u003cli\u003eConstructed to maintain fuel injection system integrity\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent air and fuel leaks at the throttle body mounting point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Gasket Designed for Precise Fitment\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is manufactured to meet OEM specifications, ensuring a reliable seal between the throttle body and intake manifold. The 0.55mm thickness is critical for maintaining the correct spacing and preventing vacuum leaks that can affect engine performance. Compatible with Acura and Honda vehicles, including the Accord, CL, and Odyssey, this gasket supports consistent fuel delivery and throttle response.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel injection system leaks at the throttle body\u003c\/li\u003e\n\u003cli\u003eMaintains proper throttle body mounting alignment\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air intake leaks\u003c\/li\u003e\n\u003cli\u003eSupports efficient engine performance and fuel economy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5036 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. This gasket thickness of 0.55mm is designed to maintain the correct seal and spacing, so replacement with the exact part number is recommended for Acura and Honda Accord, CL, and Odyssey models.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 039-5036 fuel injection throttle body mounting gasket undergoes quality control inspections to ensure consistent thickness and material integrity. Warranty coverage details can be obtained from the manufacturer or authorized distributors.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388275949749,"sku":"BBGB-039-5036","price":11.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395036_Oth.jpg?v=1774710178"},{"product_id":"beck-arnley-039-5038-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5038 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5038 fuel injection throttle body mounting gasket is designed to provide a precise seal for your vehicle's throttle body assembly. Engineered with a gasket thickness of 0.35mm, this component ensures optimal fit and function for select Lexus and Toyota models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGasket thickness of 0.35mm for accurate sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Lexus Avalon, Toyota Camry, ES300, Sienna, and Solara\u003c\/li\u003e\n\u003cli\u003ePart number 039-5038 for easy identification and replacement\u003c\/li\u003e\n\u003cli\u003eConstructed to maintain proper air and fuel delivery system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is manufactured to meet OEM specifications, providing a reliable seal between the throttle body and intake manifold. The 0.35mm thickness is critical for maintaining the correct spacing and preventing air or fuel leaks that can affect engine performance. Compatible with popular Lexus and Toyota models such as the Avalon, Camry, ES300, Sienna, and Solara, this gasket supports consistent throttle response and efficient fuel delivery.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eMaintains proper air-fuel mixture for improved engine efficiency\u003c\/li\u003e\n\u003cli\u003eReduces the risk of check engine light triggers related to throttle body sealing\u003c\/li\u003e\n\u003cli\u003eHelps avoid throttle body mounting misalignment issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5038 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. The 0.35mm thickness requires careful alignment to maintain the correct seal and prevent leaks. It is recommended to inspect the throttle body and related components during installation for any signs of wear or damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are engineered to meet or exceed OEM standards, ensuring durability and reliable performance. The 039-5038 fuel injection throttle body mounting gasket undergoes rigorous quality control to provide consistent thickness and material integrity. While specific warranty details may vary, Beck Arnley typically offers coverage against manufacturing defects to support long-term vehicle operation.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388275982517,"sku":"BBGB-039-5038","price":12.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395038_Oth.jpg?v=1774710179"},{"product_id":"beck-arnley-039-5039-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5039 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5039 fuel injection throttle body mounting gasket is designed to provide a precise seal for Lexus and Toyota vehicles. Engineered with a gasket thickness of 0.35mm, this part ensures proper fitment and optimal performance for models like the Lexus GS300, Toyota SC300, and Supra.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGasket thickness of 0.35mm for accurate sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Lexus GS300, Toyota SC300, and Supra models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5039 for easy identification and replacement\u003c\/li\u003e\n\u003cli\u003eConstructed to maintain fuel injection system integrity\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent air and fuel leaks at the throttle body mounting point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Gasket Thickness for Effective Sealing\u003c\/h2\u003e\u003cp\u003eThe 0.35mm thickness of this Beck Arnley fuel injection throttle body mounting gasket is critical for maintaining the correct spacing and seal between the throttle body and intake manifold. This precise measurement helps prevent vacuum leaks and ensures consistent fuel delivery, which is essential for engine performance and efficiency. The gasket material is engineered to withstand the thermal and chemical stresses typical in fuel injection systems, contributing to long-term durability.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis gasket is specifically designed for use with Lexus GS300, Toyota SC300, and Toyota Supra models. Using the correct gasket thickness and part number 039-5039 ensures compatibility and helps avoid common issues such as air leaks or throttle body misalignment. It is an essential component when servicing or replacing the throttle body in these vehicles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel injection system air leaks that reduce engine efficiency\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper throttle body alignment and function\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to throttle response and engine hesitation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5039 gasket, ensure the mating surfaces of the throttle body and intake manifold are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid over-compression or damage to the gasket. Using the correct gasket thickness of 0.35mm is important to maintain the designed clearance and prevent leaks.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and fitment. The 039-5039 fuel injection throttle body mounting gasket undergoes quality control inspections to ensure consistency and durability. Warranty coverage details can be obtained from the manufacturer or authorized distributors.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276080821,"sku":"BBGB-039-5039","price":11.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395039_Oth.jpg?v=1774710179"},{"product_id":"beck-arnley-039-5053-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5053 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Suzuki Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5053 fuel injection throttle body mounting gasket is designed to provide a precise seal for Suzuki Esteem, Grand Vitara, Sidekick, and Vitara models. With a gasket thickness of 0.50mm, this part ensures proper fitment and optimal performance in your vehicle's air and fuel delivery system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGasket thickness: 0.50mm for accurate sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Suzuki Esteem, Grand Vitara, Sidekick, and Vitara\u003c\/li\u003e\n\u003cli\u003ePart number 039-5053 for easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned for fuel injection throttle body mounting applications\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive gaskets and sealing systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision and Compatibility for Suzuki Fuel Systems\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet the exact specifications required for Suzuki vehicles including the Esteem, Grand Vitara, Sidekick, and Vitara. The 0.50mm gasket thickness is critical for maintaining a secure seal between the throttle body and intake manifold, preventing air or fuel leaks that can affect engine performance. Using the correct gasket thickness helps ensure consistent throttle response and fuel delivery, which is essential for maintaining engine efficiency and drivability.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks in the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eEliminates fuel injection system leaks that can cause poor engine performance\u003c\/li\u003e\n\u003cli\u003eResolves rough idling or hesitation related to throttle body sealing\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel mixture for Suzuki Esteem, Grand Vitara, Sidekick, and Vitara\u003c\/li\u003e\n\u003cli\u003ePrevents contamination and damage to throttle body components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eVerify the gasket thickness matches the original specification (0.50mm) for proper sealing\u003c\/li\u003e\n\u003cli\u003eUse appropriate torque specifications for the throttle body bolts to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the throttle body and intake manifold for warping or damage prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures this fuel injection throttle body mounting gasket to meet or exceed OEM standards for fit, form, and function. The part number 039-5053 undergoes rigorous quality control to ensure durability and reliable sealing performance. While specific warranty details may vary, Beck Arnley products typically come with a limited warranty against defects in materials and workmanship, providing confidence in the longevity of this gasket for your Suzuki Esteem, Grand Vitara, Sidekick, or Vitara.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276113589,"sku":"BBGB-039-5053","price":11.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395053_Oth.jpg?v=1774710180"},{"product_id":"beck-arnley-039-5056-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5056 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Volvo Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5056 fuel injection throttle body mounting gasket is designed to provide a precise seal for Volvo models including the 850, 960, C70, S70, S90, V70, and V90. With a gasket thickness of 0.50mm, this part ensures proper fitment and optimal performance in your vehicle's air and fuel delivery system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGasket thickness of 0.50mm for accurate sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Volvo models: 850, 960, C70, S70, S90, V70, V90\u003c\/li\u003e\n\u003cli\u003ePart number 039-5056 for easy identification and replacement\u003c\/li\u003e\n\u003cli\u003eDesigned for fuel injection throttle body mounting applications\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive gaskets and sealing systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision and Compatibility for Volvo Fuel Systems\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet the exact specifications required by Volvo vehicles. The 0.50mm thickness provides a reliable seal between the throttle body and intake manifold, preventing air and fuel leaks that can affect engine performance. Compatible with a range of Volvo models such as the 850, 960, C70, S70, S90, V70, and V90, this gasket supports consistent fuel delivery and helps maintain engine efficiency.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSeals throttle body to intake manifold to prevent vacuum leaks\u003c\/li\u003e\n\u003cli\u003ePrevents fuel leakage in the fuel injection system\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel mixture for engine performance\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine hesitation or rough idling caused by gasket failure\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to throttle body mounting gasket wear or damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5056 gasket, ensure the mating surfaces of the throttle body and intake manifold are clean and free of old gasket material or debris. The 0.50mm thickness requires careful alignment to avoid leaks. Use appropriate torque specifications for the throttle body bolts to prevent gasket distortion. It is recommended to inspect the gasket during routine maintenance or throttle body service on compatible Volvo models.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures this fuel injection throttle body mounting gasket to meet or exceed OEM standards for durability and fitment. The part number 039-5056 undergoes rigorous quality control to ensure consistent thickness and material integrity. While specific warranty details may vary, Beck Arnley products typically come with a limited warranty against defects in materials and workmanship, providing confidence in the gasket's reliability for Volvo 850, 960, C70, S70, S90, V70, and V90 vehicles.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276146357,"sku":"BBGB-039-5056","price":11.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395056_Oth_8015842f-ff58-4e8f-9b7b-99e7b17b3a4c.jpg?v=1774710180"},{"product_id":"beck-arnley-039-5058-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5058 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Volvo\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5058 fuel injection throttle body mounting gasket is designed to provide a precise seal for Volvo models 240, 740, 760, and 940. With a gasket thickness of 0.40mm, this part ensures proper fitment and optimal performance in your vehicle's air and fuel delivery system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGasket thickness of 0.40mm for accurate sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with Volvo 240, 740, 760, and 940 models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5058 for easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned for fuel injection throttle body mounting applications\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted automotive parts brand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Beck Arnley 039-5058 Gasket\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to maintain a secure and leak-free connection between the throttle body and intake manifold. The 0.40mm thickness is critical for ensuring the correct spacing and sealing, preventing air or fuel leaks that could affect engine performance. Compatible specifically with Volvo 240, 740, 760, and 940 models, this gasket meets the precise specifications required for these vehicles.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eMaintains proper air-fuel mixture for efficient engine operation\u003c\/li\u003e\n\u003cli\u003eHelps avoid throttle response issues related to gasket failure\u003c\/li\u003e\n\u003cli\u003eSupports overall engine performance and emissions control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5058 gasket, ensure the mating surfaces of the throttle body and intake manifold are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. The 0.40mm thickness requires careful alignment to maintain the correct seal and prevent leaks.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. The 039-5058 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and performance. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276179125,"sku":"BBGB-039-5058","price":11.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395058_Oth.jpg?v=1774710180"},{"product_id":"beck-arnley-039-5067-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5067 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Land Rover\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5067 fuel injection throttle body mounting gasket is designed specifically for Land Rover Discovery and Range Rover models. This gasket ensures a secure seal between the throttle body and intake manifold, maintaining optimal engine performance and preventing air or fuel leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Land Rover Discovery and Range Rover vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 039-5067 for precise identification\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted automotive parts brand\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand engine heat and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5067 gasket is engineered to meet OEM specifications for Land Rover Discovery and Range Rover models. This fuel injection throttle body mounting gasket plays a critical role in sealing the throttle body to the intake manifold, preventing vacuum leaks and ensuring consistent air-fuel mixture delivery. Proper sealing helps maintain engine efficiency and reduces the risk of performance issues related to air or fuel leakage.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eMaintains proper throttle response and engine performance\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air intake leaks\u003c\/li\u003e\n\u003cli\u003eSupports overall engine reliability in Land Rover Discovery and Range Rover vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse the correct torque specifications for throttle body bolts to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the throttle body and intake manifold for warping or damage prior to gasket replacement\u003c\/li\u003e\n\u003cli\u003eReplace the gasket promptly if signs of wear or leakage are detected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. The 039-5067 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and performance. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term vehicle operation.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276244661,"sku":"BBGB-039-5067","price":13.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395067_Oth.jpg?v=1774710183"},{"product_id":"beck-arnley-039-5069-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5069 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Lexus and Toyota\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5069 fuel injection throttle body mounting gasket is designed to provide a secure seal for the throttle body assembly. Compatible with select Lexus and Toyota models, this gasket ensures proper air and fuel delivery system performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus CT200h and Toyota Prius, Prius Plug-In, and Prius V models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5069 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eManufactured to meet OEM specifications for durability and reliability\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal between the throttle body and intake manifold\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks that can affect engine performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to fit specific hybrid models including the Lexus CT200h and Toyota Prius series such as the Prius, Prius Plug-In, and Prius V. The gasket plays a critical role in maintaining the integrity of the air and fuel delivery system by sealing the throttle body to the intake manifold. Using part number 039-5069 guarantees compatibility and helps avoid installation issues related to improper fit.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates vacuum leaks caused by worn or damaged throttle body gaskets\u003c\/li\u003e\n\u003cli\u003ePrevents rough idling and engine hesitation linked to air intake leaks\u003c\/li\u003e\n\u003cli\u003eHelps maintain optimal fuel efficiency by ensuring proper air-fuel mixture\u003c\/li\u003e\n\u003cli\u003eReduces the risk of check engine light triggers related to throttle body seal failure\u003c\/li\u003e\n\u003cli\u003eSupports smooth throttle response and engine performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5069 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid gasket damage or leaks. It is recommended to inspect the throttle body and related components for wear during installation to maintain system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and fitment. The 039-5069 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and sealing effectiveness. Warranty coverage details can be obtained from the manufacturer or authorized distributors.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276277429,"sku":"BBGB-039-5069","price":14.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395069_Oth.jpg?v=1774710183"},{"product_id":"beck-arnley-039-5073-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5073 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Lexus and Toyota\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5073 Fuel Injection Throttle Body Mounting Gasket is designed to provide a secure seal between the throttle body and intake manifold. This gasket is compatible with various Lexus and Toyota models, ensuring proper fuel delivery and engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus and Toyota models including 4Runner, GS400, GS430, GX470, Land Cruiser, LS400, LS430, LX470, SC400, SC430, Sequoia, and Tundra\u003c\/li\u003e\n\u003cli\u003ePart number 039-5073 ensures precise fit and reliable sealing\u003c\/li\u003e\n\u003cli\u003eManufactured to meet OEM specifications for durability and performance\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining proper air and fuel delivery system integrity\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality materials to resist heat and chemical exposure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5073 Fuel Injection Throttle Body Mounting Gasket is engineered to fit a range of Lexus and Toyota vehicles, including popular models such as the Lexus GS430 and Toyota Tundra. This gasket plays a critical role in sealing the throttle body to the intake manifold, preventing air and fuel leaks that can affect engine efficiency. By maintaining a tight seal, it helps ensure consistent throttle response and optimal fuel injection performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel mixture for efficient combustion\u003c\/li\u003e\n\u003cli\u003eReduces the risk of engine hesitation or poor acceleration\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to throttle body gasket wear or damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and intake manifold surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse the Beck Arnley 039-5073 gasket to guarantee proper fit and sealing\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect surrounding components for wear or damage during installation\u003c\/li\u003e\n\u003cli\u003eRecommended for professional installation or by experienced technicians\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 039-5073 Fuel Injection Throttle Body Mounting Gasket undergoes strict quality control to ensure consistent fit and function. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, supporting long-term vehicle operation.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276310197,"sku":"BBGB-039-5073","price":23.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395073_Oth.jpg?v=1774710184"},{"product_id":"beck-arnley-039-5075-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5075 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Toyota and Scion\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5075 fuel injection throttle body mounting gasket is designed to provide a secure seal for your vehicle's throttle body assembly. Compatible with select Toyota and Scion models, this gasket ensures proper air and fuel delivery system performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Camry, Highlander, RAV4, Solara, and Scion tC models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5075 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive gaskets and sealing systems\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal between the throttle body and intake manifold\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand engine heat and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket is engineered to meet OEM specifications for a proper fit and reliable sealing performance. It is compatible with various Toyota models including the Camry, Highlander, RAV4, and Solara, as well as the Scion tC. The gasket helps maintain the integrity of the air and fuel delivery system by preventing vacuum leaks and ensuring consistent throttle response. Using part number 039-5075 guarantees you receive the correct gasket designed specifically for these applications.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or poor engine performance\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks that may trigger check engine lights related to fuel delivery\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper throttle body mounting to avoid throttle response issues\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine stalling or hesitation during acceleration\u003c\/li\u003e\n\u003cli\u003eAddresses potential fuel injection system inefficiencies caused by gasket failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5075 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and related components for wear or damage during installation to maintain optimal engine performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley products are manufactured to meet or exceed OEM standards, providing reliable sealing solutions for air and fuel delivery systems. The 039-5075 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and fitment accuracy. While specific warranty details may vary, Beck Arnley typically offers coverage against manufacturing defects to support long-term vehicle operation.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276342965,"sku":"BBGB-039-5075","price":17.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395075_Oth_d8d20461-3bf4-4788-9aa9-caea40293fa8.jpg?v=1774710185"},{"product_id":"beck-arnley-039-5076-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5076 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5076 fuel injection throttle body mounting gasket is designed for precise fitment on select Lexus and Toyota models. This gasket ensures a secure seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus and Toyota vehicles including Avalon, ES300, Highlander, RX300, and Sienna\u003c\/li\u003e\n\u003cli\u003ePart number 039-5076 for accurate identification and replacement\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a reliable seal for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks that can affect engine operation\u003c\/li\u003e\n\u003cli\u003eManufactured to meet OEM specifications for fit and durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to fit a range of Lexus and Toyota models, specifically the Avalon, ES300, Highlander, RX300, and Sienna. The gasket plays a critical role in sealing the throttle body to the intake manifold, preventing vacuum leaks and ensuring consistent air-fuel mixture delivery. Using part number 039-5076 guarantees compatibility and proper installation, reducing the risk of engine performance issues related to gasket failure.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates vacuum leaks causing rough idling or stalling\u003c\/li\u003e\n\u003cli\u003ePrevents fuel injection system leaks that reduce fuel efficiency\u003c\/li\u003e\n\u003cli\u003eAddresses throttle body mounting issues that lead to check engine light activation\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper engine air-fuel ratio for smooth acceleration\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged gaskets to restore engine performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5076 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and related components for wear or damage during installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. The 039-5076 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and performance. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term use.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276408501,"sku":"BBGB-039-5076","price":12.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395076_Oth.jpg?v=1774710185"},{"product_id":"beck-arnley-039-5078-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5078 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Toyota\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5078 fuel injection throttle body mounting gasket is designed specifically for Toyota Celica, Corolla, and Matrix models. This gasket ensures a secure seal between the throttle body and intake manifold, maintaining optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Celica, Corolla, and Matrix models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5078 for precise identification\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal to prevent air and fuel leaks\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive gaskets\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5078 fuel injection throttle body mounting gasket is engineered to meet OEM specifications for Toyota vehicles including the Celica, Corolla, and Matrix. This gasket plays a critical role in sealing the throttle body to the intake manifold, preventing vacuum leaks and ensuring proper air-fuel mixture delivery. Using the correct gasket helps maintain engine efficiency and reduces the risk of performance issues related to air or fuel leakage.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper throttle response and engine performance\u003c\/li\u003e\n\u003cli\u003eReduces the risk of check engine light triggers related to air intake issues\u003c\/li\u003e\n\u003cli\u003eSupports consistent fuel injection system operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5078 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and surrounding components for wear or damage during installation to ensure optimal sealing and performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 039-5078 gasket to meet or exceed OEM standards, providing reliable sealing performance for Toyota Celica, Corolla, and Matrix models. This part undergoes rigorous quality control to ensure durability and fitment accuracy. While specific warranty details may vary, Beck Arnley products typically come with a limited warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276474037,"sku":"BBGB-039-5078","price":12.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395078_Oth.jpg?v=1774710185"},{"product_id":"beck-arnley-039-5079-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5079 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Toyota Corolla\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5079 fuel injection throttle body mounting gasket is designed specifically for Toyota Corolla models. This gasket ensures a secure seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Corolla fuel injection systems\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting sealing\u003c\/li\u003e\n\u003cli\u003ePrecise fitment with part number 039-5079\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks at the throttle body mounting point\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted automotive parts brand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5079 gasket is engineered to meet OEM specifications for the Toyota Corolla. It provides a tight seal that prevents vacuum leaks and fuel vapor loss, which can affect engine idling and throttle response. This fuel injection throttle body mounting gasket is made from high-quality materials that resist heat and chemical degradation, ensuring consistent performance over time. Its exact fitment reduces installation time and potential for gasket failure.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis gasket is used to mount the throttle body securely to the intake manifold on Toyota Corolla vehicles. It addresses several common issues, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEliminating vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003ePreventing fuel vapor leaks that reduce fuel efficiency\u003c\/li\u003e\n\u003cli\u003eStopping air leaks that can trigger check engine lights\u003c\/li\u003e\n\u003cli\u003eMaintaining proper throttle response and engine performance\u003c\/li\u003e\n\u003cli\u003eReducing the risk of throttle body mounting surface damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5079 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body mounting area for any signs of wear or damage before installation. Using the correct part number 039-5079 guarantees compatibility with Toyota Corolla models.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 039-5079 fuel injection throttle body mounting gasket undergoes strict quality control to ensure proper fit and function. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, supporting long-term vehicle maintenance needs.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388276506805,"sku":"BBGB-039-5079","price":11.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395079_Oth.jpg?v=1774710186"},{"product_id":"beck-arnley-039-5080-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5080 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Toyota Prius C\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5080 fuel injection throttle body mounting gasket is designed specifically for Toyota Prius C models. This gasket ensures a secure seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Prius C fuel injection systems\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting sealing performance\u003c\/li\u003e\n\u003cli\u003ePrecise fitment with part number 039-5080 for easy installation\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks at the throttle body mounting point\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Application\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5080 gasket is engineered to meet OEM specifications for the Toyota Prius C. It provides a reliable seal that prevents vacuum leaks and fuel delivery issues caused by a compromised throttle body mounting surface. This gasket is essential for maintaining proper air-fuel mixture and engine idle stability. Its design ensures compatibility with the fuel injection throttle body, supporting consistent engine response and emissions control.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Gasket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003ePrevents fuel leaks at the throttle body mounting interface\u003c\/li\u003e\n\u003cli\u003eReduces the risk of check engine light triggers related to air intake\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper throttle response and engine performance\u003c\/li\u003e\n\u003cli\u003eSupports emission system integrity by ensuring a tight seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and intake manifold surfaces are clean and free of old gasket material\u003c\/li\u003e\n\u003cli\u003eUse the Beck Arnley 039-5080 gasket to replace any worn or damaged gasket during throttle body service\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect surrounding components for wear or damage during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance for Toyota Prius C vehicles. The 039-5080 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and proper fitment. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support customer confidence in their products.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278046901,"sku":"BBGB-039-5080","price":11.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395080_Oth.jpg?v=1774710186"},{"product_id":"beck-arnley-039-5082-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5082 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Toyota Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5082 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Toyota 4Runner, FJ Cruiser, Tacoma, and Tundra. This gasket ensures proper fuel and air delivery by preventing leaks and maintaining optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota 4Runner, FJ Cruiser, Tacoma, and Tundra models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5082 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eEngineered to maintain a tight seal between the throttle body and intake manifold\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand heat and pressure variations\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining fuel injection system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Application\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5082 fuel injection throttle body mounting gasket is a critical component in the air and fuel delivery system. It fits specific Toyota models including the 4Runner, FJ Cruiser, Tacoma, and Tundra, ensuring a proper seal between the throttle body and intake manifold. This gasket helps prevent air and fuel leaks that can lead to engine performance issues. By maintaining a secure connection, it supports efficient fuel injection and consistent engine operation.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Gasket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eReduces the risk of engine hesitation or poor acceleration\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air\/fuel mixture\u003c\/li\u003e\n\u003cli\u003eMaintains proper throttle response and fuel efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse the correct torque specifications for throttle body bolts to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the throttle body and intake manifold for warping or damage prior to gasket replacement\u003c\/li\u003e\n\u003cli\u003eReplace the gasket promptly if any signs of wear or leaks are detected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 039-5082 fuel injection throttle body mounting gasket undergoes strict quality control to ensure proper fit and function. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term use in Toyota 4Runner, FJ Cruiser, Tacoma, and Tundra vehicles.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278112437,"sku":"BBGB-039-5082","price":12.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395082_Oth.jpg?v=1774710186"},{"product_id":"beck-arnley-039-5083-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5083 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5083 fuel injection throttle body mounting gasket is designed specifically for Toyota Echo models. This gasket ensures a secure seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Echo vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 039-5083 for precise identification\u003c\/li\u003e\n\u003cli\u003eEnsures a reliable seal for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted automotive parts brand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket is engineered to meet OEM specifications for the Toyota Echo. It provides a tight seal that prevents air and fuel leaks, which can affect engine idling and overall performance. The gasket is made from durable materials designed to withstand heat and pressure within the engine bay, ensuring long-lasting service life. The part number 039-5083 corresponds directly to this gasket, making it easy to verify compatibility and replacement needs.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks at the throttle body mounting point\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel mixture for efficient combustion\u003c\/li\u003e\n\u003cli\u003eReduces engine hesitation during acceleration\u003c\/li\u003e\n\u003cli\u003eSupports consistent throttle response in Toyota Echo models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5083 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body mounting area for any signs of wear or damage before installation. Using the correct tools and following the vehicle manufacturer’s service manual will help achieve a proper seal and optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. The 039-5083 fuel injection throttle body mounting gasket undergoes quality control checks to ensure durability and performance. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, supporting confidence in the product’s longevity and reliability for Toyota Echo owners.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278145205,"sku":"BBGB-039-5083","price":13.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395083_Oth.jpg?v=1774710187"},{"product_id":"beck-arnley-039-5084-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5084 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Lexus GS300 and IS250\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5084 fuel injection throttle body mounting gasket is designed specifically for Lexus GS300 and IS250 models. This gasket ensures a secure seal between the throttle body and intake manifold, maintaining optimal engine performance and preventing air or fuel leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus GS300 and IS250 vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 039-5084 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a tight, leak-free seal\u003c\/li\u003e\n\u003cli\u003eDesigned for fuel injection throttle body mounting applications\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted automotive parts brand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Application\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket (part number 039-5084) is engineered to fit the throttle body assembly on Lexus GS300 and IS250 models. It plays a critical role in sealing the connection between the throttle body and intake manifold, preventing vacuum leaks that can affect engine idle, fuel efficiency, and overall drivability. The gasket is made from durable materials that withstand heat and chemical exposure common in engine compartments.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Gasket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks causing rough idle or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eMaintains proper air-fuel mixture for engine efficiency\u003c\/li\u003e\n\u003cli\u003eReduces potential for check engine light triggers related to air intake\u003c\/li\u003e\n\u003cli\u003eHelps avoid throttle body mounting surface damage due to improper sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and intake manifold surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse the Beck Arnley 039-5084 gasket to maintain factory specifications for sealing\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer-recommended settings to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the throttle body for any signs of wear or damage during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, ensuring reliable fit and function. The 039-5084 fuel injection throttle body mounting gasket undergoes strict quality control to provide consistent performance. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term use in Lexus GS300 and IS250 vehicles.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278177973,"sku":"BBGB-039-5084","price":15.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395084_Oth.jpg?v=1774710187"},{"product_id":"beck-arnley-039-5085-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5085 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Nissan Sentra\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5085 fuel injection throttle body mounting gasket is designed specifically for Nissan Sentra models. This gasket ensures a secure seal between the throttle body and intake manifold, preventing air and fuel leaks that can affect engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan Sentra vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 039-5085 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a tight, leak-free seal\u003c\/li\u003e\n\u003cli\u003eDurable material designed to withstand engine heat and pressure\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining proper air-fuel mixture and engine efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5085 is a fuel injection throttle body mounting gasket engineered to meet OEM specifications for Nissan Sentra models. This gasket plays a critical role in sealing the throttle body to the intake manifold, preventing vacuum leaks and ensuring consistent engine operation. Manufactured with materials that resist heat and chemical exposure, it maintains its integrity over time, reducing the risk of engine performance issues related to air or fuel leakage.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks that can trigger check engine lights\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper fuel injection system performance\u003c\/li\u003e\n\u003cli\u003eReduces risk of decreased fuel efficiency due to improper sealing\u003c\/li\u003e\n\u003cli\u003ePrevents throttle body mounting surface damage from leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5085 gasket on a Nissan Sentra, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body mounting area for any signs of wear or damage before installation to ensure a proper seal.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. The 039-5085 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and performance. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in material and workmanship to support long-term vehicle operation.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278210741,"sku":"BBGB-039-5085","price":10.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395085_Oth.jpg?v=1774710187"},{"product_id":"beck-arnley-039-5086-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5086 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Nissan Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5086 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Nissan Frontier, NV1500, NV2500, NV3500, Pathfinder, and Xterra models. This gasket ensures proper fuel delivery system performance by preventing leaks and maintaining optimal engine function.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan Frontier, NV1500, NV2500, NV3500, Pathfinder, and Xterra\u003c\/li\u003e\n\u003cli\u003ePart number 039-5086 for precise identification\u003c\/li\u003e\n\u003cli\u003eEngineered to maintain a tight seal between throttle body and intake manifold\u003c\/li\u003e\n\u003cli\u003eDurable material resists heat and fuel exposure\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining fuel injection system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Application\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5086 gasket is specifically designed for use in the air and fuel delivery system, serving as the mounting gasket for the fuel injection throttle body. This component plays a critical role in sealing the connection between the throttle body and intake manifold, preventing air and fuel leaks that can affect engine performance. Compatible with several Nissan models including the Frontier, NV1500, NV2500, NV3500, Pathfinder, and Xterra, this gasket meets OEM specifications to ensure proper fit and function.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Gasket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent throttle response and engine performance\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine misfires related to air\/fuel mixture imbalance\u003c\/li\u003e\n\u003cli\u003ePrevents contamination of the intake manifold from external debris\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and intake manifold surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse the correct torque specifications when tightening bolts to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the gasket for any defects prior to installation\u003c\/li\u003e\n\u003cli\u003eReplace the gasket whenever the throttle body is removed to maintain a proper seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, ensuring reliable performance and durability. The 039-5086 fuel injection throttle body mounting gasket undergoes rigorous quality control to provide a consistent seal and long service life. Warranty coverage details can be obtained from the product documentation or Beck Arnley directly.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278243509,"sku":"BBGB-039-5086","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395086_Oth.jpg?v=1774710188"},{"product_id":"beck-arnley-039-5087-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5087 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Nissan Versa\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5087 fuel injection throttle body mounting gasket is designed specifically for Nissan Versa models. This gasket ensures a secure seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan Versa vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 039-5087 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a tight, leak-free seal\u003c\/li\u003e\n\u003cli\u003eResistant to heat and fuel exposure\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining proper air and fuel delivery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet OEM specifications for the Nissan Versa. The gasket plays a critical role in sealing the throttle body to the intake manifold, preventing air and fuel leaks that can affect engine performance. Using part number 039-5087 ensures compatibility and proper fitment for your Nissan Versa, helping to avoid common issues related to throttle body installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent throttle response and engine power\u003c\/li\u003e\n\u003cli\u003eReduces risk of check engine light due to air intake issues\u003c\/li\u003e\n\u003cli\u003eSupports proper air-fuel mixture for efficient combustion\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5087 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and related components for wear or damage during installation to maintain optimal engine function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance for your Nissan Versa. The 039-5087 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and proper fit. Warranty coverage details can be obtained from Beck Arnley or authorized distributors, reflecting the brand's commitment to quality and customer satisfaction.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278276277,"sku":"BBGB-039-5087","price":10.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395087_Oth.jpg?v=1774710188"},{"product_id":"beck-arnley-039-5089-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5089 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Nissan and INFINITI\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5089 fuel injection throttle body mounting gasket is designed to provide a secure seal between the throttle body and intake manifold. This gasket is compatible with a range of Nissan and INFINITI models, ensuring proper fuel delivery and engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan and INFINITI vehicles including 350Z, Altima, FX35, FX45, G35, I35, M35, Maxima, Murano, Pathfinder, Q45, and QX4\u003c\/li\u003e\n\u003cli\u003ePart number 039-5089 ensures precise fit and reliable sealing\u003c\/li\u003e\n\u003cli\u003eConstructed to withstand fuel and air exposure in the throttle body area\u003c\/li\u003e\n\u003cli\u003ePrevents vacuum leaks and maintains optimal engine efficiency\u003c\/li\u003e\n\u003cli\u003eDurable material designed for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet OEM specifications for a proper seal on the throttle body mounting surface. It is specifically compatible with Nissan and INFINITI models such as the 350Z, Altima, FX35, FX45, G35, I35, M35, Maxima, Murano, Pathfinder, Q45, and QX4. Using part number 039-5089 ensures you receive the correct gasket designed to fit these vehicles, helping maintain proper air and fuel delivery to the engine.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents air leaks that can cause rough idling or engine hesitation\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper throttle response and engine performance\u003c\/li\u003e\n\u003cli\u003eReduces risk of vacuum leaks that affect fuel injection accuracy\u003c\/li\u003e\n\u003cli\u003eSupports consistent engine operation by maintaining a secure seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and intake manifold surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse the Beck Arnley 039-5089 gasket to guarantee proper fit and sealing\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the gasket for any damage before installation\u003c\/li\u003e\n\u003cli\u003eReplace the gasket whenever the throttle body is removed to maintain optimal sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 039-5089 fuel injection throttle body mounting gasket undergoes strict quality control to ensure proper fit and function. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term use.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278309045,"sku":"BBGB-039-5089","price":10.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395089_Oth.jpg?v=1774710188"},{"product_id":"beck-arnley-039-5090-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5090 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Mazda\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5090 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Mazda 3, 5, and 6 models. This gasket ensures proper fuel delivery system performance by preventing air and fuel leaks at the throttle body connection.\u003c\/p\u003e\u003ch2\u003eKey Features of Beck Arnley 039-5090 Gasket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mazda 3, Mazda 5, and Mazda 6 models\u003c\/li\u003e\n\u003cli\u003ePrecision-engineered for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003eDurable sealing material to withstand engine heat and pressure\u003c\/li\u003e\n\u003cli\u003eOEM-quality fit and function for reliable performance\u003c\/li\u003e\n\u003cli\u003ePart number 039-5090 for easy identification and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is specifically designed to fit Mazda vehicles including the 3, 5, and 6 models. The gasket creates a tight seal between the throttle body and intake manifold, preventing vacuum leaks and ensuring consistent fuel delivery. Manufactured with high-quality materials, the 039-5090 gasket resists heat and chemical exposure common in engine compartments. Its precise fit helps maintain engine efficiency and smooth throttle response, which is critical for optimal vehicle operation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents air leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks at the throttle body connection\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel mixture for engine performance\u003c\/li\u003e\n\u003cli\u003eReduces potential check engine light triggers related to intake leaks\u003c\/li\u003e\n\u003cli\u003eSupports consistent throttle response and acceleration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and mounting surfaces are clean and free of debris before installation\u003c\/li\u003e\n\u003cli\u003eUse the correct torque specifications when tightening bolts to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the old gasket for damage or wear to confirm replacement necessity\u003c\/li\u003e\n\u003cli\u003eReplace any damaged mounting hardware to ensure a secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, ensuring reliable fit and function. The 039-5090 fuel injection throttle body mounting gasket undergoes rigorous quality control to provide consistent performance. Warranty coverage details can be obtained from the product documentation or Beck Arnley directly, supporting confidence in your replacement part.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278341813,"sku":"BBGB-039-5090","price":20.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395090_Oth.jpg?v=1774710188"},{"product_id":"beck-arnley-039-5091-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5091 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5091 fuel injection throttle body mounting gasket is designed for precise fitment on select Mazda vehicles. This gasket ensures a secure seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mazda 3, Mazda 6, and Mazda CX-7 models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5091 for accurate identification\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a reliable seal for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks that can affect engine operation\u003c\/li\u003e\n\u003cli\u003eDurable material designed to withstand engine heat and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5091 gasket is engineered to meet OEM specifications for Mazda 3, Mazda 6, and Mazda CX-7 vehicles. It fits precisely between the throttle body and intake manifold, ensuring a tight seal that prevents vacuum leaks and fuel delivery issues. This gasket is critical for maintaining proper air-fuel mixture and throttle response. Its durable construction resists degradation from heat and chemical exposure common in engine compartments.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket is used to replace worn or damaged gaskets that can cause several engine performance problems. It is compatible with the following Mazda models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMazda 3\u003c\/li\u003e\n\u003cli\u003eMazda 6\u003c\/li\u003e\n\u003cli\u003eMazda CX-7\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCommon issues this gasket helps resolve include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVacuum leaks causing rough idle or stalling\u003c\/li\u003e\n\u003cli\u003eFuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eReduced engine performance due to improper air-fuel mixture\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by throttle body sensor errors\u003c\/li\u003e\n\u003cli\u003eThrottle response irregularities\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5091 gasket, ensure the mating surfaces of the throttle body and intake manifold are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and related components for wear or damage during installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 039-5091 fuel injection throttle body mounting gasket undergoes strict quality control to ensure proper fit and function. Warranty coverage details can be obtained from the manufacturer or authorized distributors, typically covering defects in material and workmanship.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278374581,"sku":"BBGB-039-5091","price":14.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395091_Oth.jpg?v=1774710189"},{"product_id":"beck-arnley-039-5092-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5092 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Mazda Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5092 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Mazda's throttle body assembly. Compatible with multiple Mazda models, this gasket ensures proper air and fuel delivery system performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mazda 3, 5, 6, CX-7, MX-5 Miata, and Tribute models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5092 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive gaskets and sealing systems\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal between the throttle body and intake manifold\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand engine heat and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet or exceed OEM specifications for Mazda vehicles including the 3, 5, 6, CX-7, MX-5 Miata, and Tribute. The gasket provides a reliable seal that prevents air and fuel leaks, which can affect engine performance and fuel efficiency. Using part number 039-5092 guarantees compatibility and proper fitment for these specific Mazda models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel injection system leaks that reduce engine efficiency\u003c\/li\u003e\n\u003cli\u003eResolves throttle body mounting issues related to gasket wear or damage\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel mixture for optimal engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents contamination and debris ingress at the throttle body interface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5092 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid gasket deformation or leaks. It is recommended to inspect the throttle body and related components for wear during installation to maintain system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley products are manufactured to meet stringent quality standards, ensuring durability and reliable performance. While specific warranty details for part number 039-5092 may vary, Beck Arnley typically offers coverage against manufacturing defects. Refer to the product documentation or manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278407349,"sku":"BBGB-039-5092","price":15.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395092_Oth.jpg?v=1774710189"},{"product_id":"beck-arnley-039-5093-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5093 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Mazda Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5093 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Mazda 626, MX-6, Protege, and Protege5 models. This gasket ensures proper fuel delivery system performance by preventing leaks and maintaining optimal throttle body function.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mazda 626, MX-6, Protege, and Protege5 models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5093 for precise identification\u003c\/li\u003e\n\u003cli\u003eEngineered to maintain a tight seal between throttle body and intake manifold\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand fuel and temperature exposure\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining fuel injection system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Application\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5093 fuel injection throttle body mounting gasket is a critical component in the air and fuel delivery system. It fits specifically on Mazda 626, MX-6, Protege, and Protege5 vehicles, ensuring a proper seal between the throttle body and intake manifold. This gasket prevents air and fuel leaks that can affect engine performance and fuel efficiency. By maintaining a secure connection, it supports consistent throttle response and helps avoid drivability issues related to vacuum leaks.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Gasket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks causing rough idle or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eReduces throttle response inconsistencies\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air\/fuel mixture\u003c\/li\u003e\n\u003cli\u003eMaintains proper air and fuel delivery for engine efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and intake manifold surfaces are clean and free of old gasket material\u003c\/li\u003e\n\u003cli\u003eUse the Beck Arnley 039-5093 gasket to guarantee proper fit and seal\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect surrounding components for wear or damage during installation\u003c\/li\u003e\n\u003cli\u003eReplace the gasket anytime the throttle body is removed to maintain sealing integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, ensuring reliable performance and durability. The 039-5093 fuel injection throttle body mounting gasket undergoes strict quality control to provide a precise fit for Mazda 626, MX-6, Protege, and Protege5 models. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term use.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278505653,"sku":"BBGB-039-5093","price":10.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395093_Oth.jpg?v=1774710189"},{"product_id":"beck-arnley-039-5094-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5094 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Mazda Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5094 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Mazda's throttle body assembly. Engineered to maintain optimal fuel delivery and prevent leaks, this gasket is compatible with a range of Mazda models including the Mazda 3, Mazda 6, CX-3, CX-5, CX-9, CX-30, CX-50, and MX-5 Miata.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrecision-engineered gasket for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Mazda models and years\u003c\/li\u003e\n\u003cli\u003eDurable material designed to withstand heat and pressure\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal to prevent air and fuel leaks\u003c\/li\u003e\n\u003cli\u003eOEM-quality fit and function for reliable performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5094 gasket is specifically designed for use in the air and fuel delivery system, ensuring a proper seal between the throttle body and intake manifold. This part is compatible with a variety of Mazda vehicles, including the Mazda 3 and Mazda 6 sedans, as well as popular crossover SUVs like the CX-3, CX-5, CX-9, CX-30, and CX-50. It also fits the MX-5 Miata sports car. Using the correct gasket helps maintain engine efficiency and prevents vacuum leaks that can affect performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eMaintains proper air-fuel mixture for efficient combustion\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air intake leaks\u003c\/li\u003e\n\u003cli\u003eSupports consistent throttle response and engine performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5094 fuel injection throttle body mounting gasket, ensure the mating surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping the throttle body or damaging the gasket. It is recommended to inspect the throttle body and intake manifold for any signs of wear or damage during installation. Replacement of this gasket is typically straightforward with basic hand tools and moderate mechanical experience.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. The 039-5094 gasket undergoes rigorous quality control to ensure durability under normal operating conditions. While specific warranty details may vary, Beck Arnley generally offers coverage against defects in materials and workmanship, supporting long-term vehicle performance.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278538421,"sku":"BBGB-039-5094","price":13.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395094_Oth.jpg?v=1774710190"},{"product_id":"beck-arnley-039-5095-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5095 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5095 fuel injection throttle body mounting gasket is designed specifically for Mazda 2 models. This gasket ensures a secure seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mazda 2 vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 039-5095 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a reliable seal for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003eResistant to heat and fuel exposure for durability\u003c\/li\u003e\n\u003cli\u003eOEM-quality fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5095 gasket is engineered to meet or exceed original equipment specifications for the Mazda 2. It is manufactured from materials that withstand the thermal and chemical stresses found in the throttle body area. This gasket plays a critical role in preventing air and fuel leaks that can affect engine idle, throttle response, and emissions. The precise fitment ensures proper alignment and sealing, reducing the risk of vacuum leaks and maintaining engine efficiency.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket is used to replace worn or damaged gaskets on Mazda 2 models. It addresses several common issues including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAir leaks causing rough idle or stalling\u003c\/li\u003e\n\u003cli\u003eFuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eReduced engine performance due to improper sealing\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by throttle body sensor errors\u003c\/li\u003e\n\u003cli\u003eIncreased emissions from vacuum leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5095 gasket on a Mazda 2, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and related components for wear or damage during installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet strict quality standards, providing reliable performance and durability. The 039-5095 fuel injection throttle body mounting gasket is backed by Beck Arnley’s commitment to quality, ensuring it meets OEM fit and function requirements. Warranty coverage details can be obtained from the product documentation or Beck Arnley directly.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278603957,"sku":"BBGB-039-5095","price":12.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395095_Oth.jpg?v=1774710190"},{"product_id":"beck-arnley-039-5096-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5096 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Honda Civic\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5096 fuel injection throttle body mounting gasket is designed specifically for Honda Civic models. This gasket ensures a secure seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Civic fuel injection systems\u003c\/li\u003e\n\u003cli\u003ePart number 039-5096 for precise fitment\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand engine heat and pressure\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks at the throttle body mounting point\u003c\/li\u003e\n\u003cli\u003eOEM-quality replacement part for reliable sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet or exceed OEM specifications for Honda Civic vehicles. The gasket provides a tight seal that prevents vacuum leaks and fuel vapor loss, which can affect engine idling and throttle response. Designed for direct replacement, part number 039-5096 fits the throttle body mounting flange precisely, ensuring proper alignment and sealing.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates vacuum leaks causing rough idle or stalling\u003c\/li\u003e\n\u003cli\u003ePrevents fuel vapor leaks that can trigger check engine lights\u003c\/li\u003e\n\u003cli\u003eMaintains proper air-fuel mixture for efficient combustion\u003c\/li\u003e\n\u003cli\u003eReduces throttle body mounting flange air leaks\u003c\/li\u003e\n\u003cli\u003eHelps avoid engine hesitation or poor acceleration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5096 gasket on a Honda Civic, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Use appropriate torque specifications to avoid over-tightening, which can damage the gasket or throttle body flange. It is recommended to inspect the throttle body and related components for wear or damage during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet strict quality standards, providing reliable performance and durability. The 039-5096 fuel injection throttle body mounting gasket undergoes rigorous testing to ensure proper fit and sealing capability. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term use.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278636725,"sku":"BBGB-039-5096","price":13.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395096_Oth.jpg?v=1774710190"},{"product_id":"beck-arnley-039-5098-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5098 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Honda Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5098 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Honda Accord, CR-V, and Element models. This gasket ensures proper fuel delivery system performance by preventing leaks and maintaining optimal engine efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Accord, CR-V, and Element models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5098 for precise identification\u003c\/li\u003e\n\u003cli\u003eDesigned for fuel injection throttle body mounting applications\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand engine heat and pressure\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal to prevent fuel and air leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Application\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet OEM specifications for Honda vehicles, including the Accord, CR-V, and Element. The gasket provides a reliable seal between the throttle body and intake manifold, which is critical for maintaining proper air and fuel mixture. Using part number 039-5098 guarantees compatibility and fitment accuracy, reducing the risk of installation issues or engine performance problems.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Gasket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper throttle response and engine performance\u003c\/li\u003e\n\u003cli\u003eReduces the risk of check engine light triggers related to air\/fuel mixture\u003c\/li\u003e\n\u003cli\u003ePrevents contamination of the intake manifold from external debris\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the mounting surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse the correct torque specifications for the throttle body bolts to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the throttle body and intake manifold for warping or damage prior to gasket replacement\u003c\/li\u003e\n\u003cli\u003eReplace the gasket promptly if any signs of wear or leaks are detected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, ensuring reliable performance and durability. The 039-5098 fuel injection throttle body mounting gasket undergoes strict quality control to provide a consistent seal and fit. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term use in Honda Accord, CR-V, and Element vehicles.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278735029,"sku":"BBGB-039-5098","price":12.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395098_Oth.jpg?v=1774710191"},{"product_id":"beck-arnley-039-5101-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5101 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Acura and Honda\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5101 fuel injection throttle body mounting gasket is designed to provide a secure seal for your vehicle's throttle body assembly. Compatible with various Acura and Honda models, this gasket ensures proper air and fuel delivery system performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura and Honda vehicles including Accord, Civic, CR-V, Fit, HR-V, and ILX\u003c\/li\u003e\n\u003cli\u003ePart number 039-5101 ensures precise fit and reliable sealing\u003c\/li\u003e\n\u003cli\u003eManufactured to meet OEM specifications for durability and performance\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining proper throttle body function and preventing air leaks\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality materials to withstand engine heat and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to fit a range of Acura and Honda models, including the Accord, Civic, CR-V, Fit, HR-V, and ILX. The gasket plays a critical role in sealing the throttle body to the intake manifold, preventing vacuum leaks that can affect engine performance. Using part number 039-5101 guarantees compatibility and helps maintain the integrity of your vehicle’s air and fuel delivery system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks that can trigger check engine lights\u003c\/li\u003e\n\u003cli\u003eMaintains proper throttle response and engine efficiency\u003c\/li\u003e\n\u003cli\u003eHelps avoid fuel delivery inconsistencies and poor acceleration\u003c\/li\u003e\n\u003cli\u003eProtects against contamination entering the intake manifold\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5101 gasket, ensure the throttle body and mounting surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and related components for wear or damage during installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures this fuel injection throttle body mounting gasket to meet or exceed OEM standards, providing reliable sealing and durability. While specific warranty details may vary, Beck Arnley products typically come with a limited warranty against defects in materials and workmanship, offering confidence in the part’s quality and longevity.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278767797,"sku":"BBGB-039-5101","price":14.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395101_Oth.jpg?v=1774710192"},{"product_id":"beck-arnley-039-5103-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5103 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Subaru\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5103 fuel injection throttle body mounting gasket is designed specifically for Subaru Legacy and Outback models. This gasket ensures a secure seal between the throttle body and intake manifold, maintaining optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Subaru Legacy and Outback vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 039-5103 for precise identification\u003c\/li\u003e\n\u003cli\u003eEngineered to provide a tight, leak-free seal\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand heat and pressure\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining proper air and fuel delivery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is manufactured to meet OEM specifications, ensuring a proper fit and reliable performance. It is designed to fit Subaru Legacy and Outback models, providing a critical seal that prevents air and fuel leaks at the throttle body mounting point. The gasket helps maintain the correct air-fuel mixture, which is vital for engine efficiency and emissions control. Using part number 039-5103 guarantees compatibility and ease of replacement during maintenance or repair.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent throttle response and engine performance\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine misfires related to air intake leaks\u003c\/li\u003e\n\u003cli\u003eSupports proper air and fuel delivery for Subaru Legacy and Outback engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5103 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid over-tightening, which can damage the gasket or throttle body. It is recommended to inspect the throttle body and related components for wear or damage during installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. The 039-5103 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and performance under typical operating conditions. While specific warranty details may vary, Beck Arnley generally offers coverage against manufacturing defects to support customer confidence in their products.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278800565,"sku":"BBGB-039-5103","price":13.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395103_Oth.jpg?v=1774710192"},{"product_id":"beck-arnley-039-5104-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5104 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eOverview of Beck Arnley Fuel Injection Throttle Body Mounting Gasket\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5104 fuel injection throttle body mounting gasket is designed specifically for Subaru Forester models. This gasket ensures a secure seal between the throttle body and intake manifold, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Subaru Forester vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 039-5104 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed to provide a reliable seal for fuel injection throttle body mounting\u003c\/li\u003e\n\u003cli\u003ePrevents air and fuel leaks that can affect engine operation\u003c\/li\u003e\n\u003cli\u003eDurable material designed to withstand engine heat and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5104 fuel injection throttle body mounting gasket is engineered to meet OEM specifications for Subaru Forester models. This gasket plays a critical role in sealing the throttle body to the intake manifold, preventing vacuum leaks and ensuring consistent air-fuel mixture delivery. Proper sealing helps maintain engine idle stability, throttle response, and overall drivability. The gasket material is selected to resist degradation from heat, fuel vapors, and engine contaminants, providing long-lasting performance in demanding conditions.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates vacuum leaks causing rough idle or stalling\u003c\/li\u003e\n\u003cli\u003ePrevents fuel injection system leaks that reduce efficiency\u003c\/li\u003e\n\u003cli\u003eResolves throttle response issues related to poor sealing\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air intake leaks\u003c\/li\u003e\n\u003cli\u003eMaintains proper engine performance and emissions control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure mating surfaces are clean and free of old gasket material before installation\u003c\/li\u003e\n\u003cli\u003eUse the correct torque specifications for throttle body bolts to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the throttle body and intake manifold for warping or damage prior to gasket replacement\u003c\/li\u003e\n\u003cli\u003eReplace the gasket promptly if any signs of wear or leakage are detected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, ensuring reliable fit and function. The 039-5104 fuel injection throttle body mounting gasket undergoes rigorous quality control to provide consistent sealing performance. Warranty coverage details are available through Beck Arnley and typically cover defects in material and workmanship under normal use conditions.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278866101,"sku":"BBGB-039-5104","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395104_Oth.jpg?v=1774710192"},{"product_id":"beck-arnley-039-5106-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5106 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Subaru Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5106 fuel injection throttle body mounting gasket is designed to provide a secure seal for the throttle body assembly on select Subaru models. This gasket ensures proper air and fuel delivery by preventing leaks and maintaining optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Subaru Crosstrek, Forester, Impreza, Legacy, Outback, and XV Crosstrek models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5106 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eManufactured to meet OEM specifications for reliable sealing\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand engine heat and pressure\u003c\/li\u003e\n\u003cli\u003eEssential component in the air and fuel delivery system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to fit a range of Subaru vehicles including the Crosstrek, Forester, Impreza, Legacy, Outback, and XV Crosstrek. The gasket plays a critical role in sealing the throttle body to the intake manifold, preventing air and fuel leaks that can affect engine efficiency. Using part number 039-5106 ensures compatibility and proper fitment, helping maintain the integrity of the fuel injection system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eMaintains proper air-fuel mixture for efficient combustion\u003c\/li\u003e\n\u003cli\u003eHelps avoid check engine light triggers related to air intake issues\u003c\/li\u003e\n\u003cli\u003eSupports consistent throttle response and engine performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5106 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and related components for wear or damage during installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 039-5106 fuel injection throttle body mounting gasket undergoes strict quality control to ensure a precise fit and long-lasting seal. Warranty coverage details can be obtained from the product documentation or manufacturer.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278898869,"sku":"BBGB-039-5106","price":17.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395106_Oth.jpg?v=1774710193"},{"product_id":"beck-arnley-039-5107-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5107 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Subaru\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5107 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Subaru Crosstrek, Forester, WRX, and XV Crosstrek models. This gasket ensures proper fuel delivery system performance by preventing leaks and maintaining optimal engine efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Subaru Crosstrek, Forester, WRX, and XV Crosstrek\u003c\/li\u003e\n\u003cli\u003ePart number 039-5107 for precise identification\u003c\/li\u003e\n\u003cli\u003eEngineered to maintain a tight seal in the throttle body assembly\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand fuel and temperature exposure\u003c\/li\u003e\n\u003cli\u003eEssential for maintaining fuel injection system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is specifically designed for use in Subaru vehicles including the Crosstrek, Forester, WRX, and XV Crosstrek. The gasket fits between the throttle body and intake manifold, creating a reliable seal that prevents air and fuel leaks. Using the correct gasket, such as part number 039-5107, helps maintain engine performance and fuel efficiency by ensuring the throttle body functions as intended.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks around the throttle body mounting area\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper air-fuel mixture for engine combustion\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine hesitation or poor throttle response\u003c\/li\u003e\n\u003cli\u003eSupports overall fuel injection system reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 039-5107 gasket, ensure the throttle body and intake manifold surfaces are clean and free of old gasket material or debris. Proper torque specifications should be followed to avoid warping or damaging the gasket. It is recommended to inspect the throttle body and related components for wear or damage during installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable fit and function. The 039-5107 fuel injection throttle body mounting gasket undergoes quality control testing to ensure durability and performance. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278931637,"sku":"BBGB-039-5107","price":14.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395107_Oth.jpg?v=1774710193"},{"product_id":"beck-arnley-039-5110-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5110 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Mitsubishi\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5110 fuel injection throttle body mounting gasket is designed to provide a secure seal for your vehicle's throttle body assembly. Compatible with several Mitsubishi models, this gasket ensures proper air and fuel delivery by preventing leaks and maintaining engine efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mitsubishi Eclipse, Galant, Lancer, and Outlander models\u003c\/li\u003e\n\u003cli\u003ePart number 039-5110 for precise identification and fit\u003c\/li\u003e\n\u003cli\u003eConstructed to withstand high temperatures and fuel exposure\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal between throttle body and intake manifold\u003c\/li\u003e\n\u003cli\u003eHelps maintain optimal engine performance and fuel efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Gasket Designed for Mitsubishi Fuel Systems\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to meet OEM specifications for Mitsubishi vehicles including the Eclipse, Galant, Lancer, and Outlander. The gasket provides a reliable seal that prevents air and fuel leaks at the throttle body mounting point, which is critical for maintaining proper engine operation. Using part number 039-5110 guarantees compatibility and helps avoid installation issues related to improper fitment.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates fuel leaks that may lead to poor fuel economy or engine performance\u003c\/li\u003e\n\u003cli\u003eReduces the risk of throttle body contamination from external debris\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent throttle response and engine power\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to worn or damaged throttle body gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and mounting surfaces are clean and free of old gasket material\u003c\/li\u003e\n\u003cli\u003eUse the correct torque specifications when securing the throttle body to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the gasket for any defects before installation\u003c\/li\u003e\n\u003cli\u003eReplace the gasket whenever the throttle body is removed to maintain a proper seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, ensuring reliable performance and durability. The 039-5110 fuel injection throttle body mounting gasket undergoes strict quality control to provide a consistent fit and seal. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to support long-term vehicle operation.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278964405,"sku":"BBGB-039-5110","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395110_Oth.jpg?v=1774710194"},{"product_id":"beck-arnley-039-5111-fuel-injection-throttle-body-mounting-gasket","title":"Beck Arnley 039-5111 Fuel Injection Throttle Body Mounting Gasket","description":"\u003ch2\u003eReliable Fuel Injection Throttle Body Mounting Gasket for Mitsubishi\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 039-5111 fuel injection throttle body mounting gasket is designed to provide a secure seal for your Mitsubishi vehicle's throttle body. Compatible with Mitsubishi Eclipse, Galant, Montero, and Montero Sport models, this gasket ensures proper air and fuel delivery system performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mitsubishi Eclipse, Galant, Montero, and Montero Sport\u003c\/li\u003e\n\u003cli\u003ePart number 039-5111 for precise identification\u003c\/li\u003e\n\u003cli\u003eDesigned for fuel injection throttle body mounting applications\u003c\/li\u003e\n\u003cli\u003eEnsures a tight seal to prevent air and fuel leaks\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive gaskets and sealing systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Application\u003c\/h2\u003e\u003cp\u003eThis fuel injection throttle body mounting gasket from Beck Arnley is engineered to maintain the integrity of the throttle body connection on select Mitsubishi vehicles. The gasket helps prevent vacuum leaks and maintains optimal air-fuel mixture by sealing the throttle body to the intake manifold. Proper sealing is critical for engine performance, fuel efficiency, and emissions control. The 039-5111 gasket is specifically designed to fit Mitsubishi Eclipse, Galant, Montero, and Montero Sport models, ensuring compatibility and reliable operation.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Gasket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents vacuum leaks that can cause rough idling or stalling\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks that affect fuel injection performance\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper throttle response and engine power\u003c\/li\u003e\n\u003cli\u003eReduces risk of check engine light due to air intake issues\u003c\/li\u003e\n\u003cli\u003ePrevents fuel odor and potential fuel leaks around the throttle body\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the throttle body and mounting surfaces are clean and free of old gasket material\u003c\/li\u003e\n\u003cli\u003eUse the Beck Arnley 039-5111 gasket to guarantee proper fit and seal\u003c\/li\u003e\n\u003cli\u003eTorque mounting bolts to manufacturer specifications to avoid gasket damage\u003c\/li\u003e\n\u003cli\u003eInspect the throttle body and intake manifold for damage before installation\u003c\/li\u003e\n\u003cli\u003eReplace the gasket immediately if any signs of wear or damage are present\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley is known for producing high-quality gaskets and sealing systems that meet or exceed OEM standards. The 039-5111 fuel injection throttle body mounting gasket undergoes rigorous quality control to ensure durability and reliable performance. While specific warranty details may vary, Beck Arnley products typically come with a limited warranty against defects in materials and workmanship, providing confidence in your purchase.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388278997173,"sku":"BBGB-039-5111","price":10.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0395111_Oth.jpg?v=1774710194"}],"url":"https:\/\/www.partcatalog.com\/collections\/gaskets-and-sealing-systems-1.oembed?page=37","provider":"PartCatalog","version":"1.0","type":"link"}