{"title":"HVAC \u003e Gaskets and Sealing Systems","description":"\u003cp\u003eA\/C and heater system gaskets, O-rings, and seals are what keep refrigerant and coolant where they belong — inside the lines, not leaking onto your driveway or evaporating into the atmosphere. These small rubber and neoprene components degrade over time from heat cycling, UV exposure, and chemical breakdown from refrigerant oil. Most fail gradually, but a full system evacuation and recharge is the perfect time to replace every O-ring and seal proactively — it's a fraction of the cost compared to a repeat labor charge. When shopping, confirm refrigerant compatibility: R-134a systems use different seal materials than R-1234yf systems, and mixing them causes premature failure. OEM kits guarantee exact dimensions and material grades, while quality aftermarket kits from brands like Four Seasons or UAC cover most domestic and import applications at lower cost. Always verify fitment by year, make, model, and engine — A\/C line routing and fitting sizes vary even within the same model generation.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOily residue or staining around A\/C line fittings or the compressor body\u003c\/strong\u003e — refrigerant oil migrates with escaping refrigerant and leaves a telltale greasy film at the leak point, often visible at service port caps, condenser fittings, or the evaporator inlet.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA\/C system loses charge repeatedly after being recharged\u003c\/strong\u003e — if the system drops pressure within a season despite no physical damage to lines or components, a weeping O-ring or degraded seal kit is the most common cause.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible dye residue under UV light at line connections or block fittings\u003c\/strong\u003e — if a previous technician injected UV dye, a blacklight will pinpoint exactly which seal is weeping before you start disassembly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant smell inside the cabin with no visible external leak\u003c\/strong\u003e — a failing heater hose O-ring or seal at the firewall can allow a slow seep that evaporates before pooling, showing up only as a sweet smell through the vents.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA\/C components being replaced or system opened for any reason\u003c\/strong\u003e — anytime a fitting is broken loose, the disturbed O-rings should be replaced rather than reused; reused seals are a leading cause of post-repair leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShould I replace all O-rings and seals every time I open the A\/C system?\u003c\/strong\u003e\n  Yes. Once a fitting is disconnected, the O-ring has been compressed in a new position and is more likely to leak when reassembled. Complete O-ring and gasket kits typically cost $10–$35, which is negligible against the labor already invested in opening the system. Replace everything you can access while it's apart.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eDoes it matter whether I use OEM seals or an aftermarket kit for R-1234yf systems?\u003c\/strong\u003e\n  It matters more than it does for older R-134a systems. R-1234yf operates at higher pressures and requires seals rated for the refrigerant and its PAG oil chemistry. Confirm any aftermarket kit is explicitly rated for R-1234yf service — not just \"universal\" — before installing. OEM or OEM-spec kits are the safer choice on newer vehicles under warranty.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eHow much does a full A\/C O-ring and seal kit replacement cost, and is it DIY-friendly?\u003c\/strong\u003e\n  Parts run $15–$60 for most domestic and import applications; a professional doing it alongside a compressor or evaporator swap may charge $20–$50 in added labor. As a standalone job, accessing every fitting can be time-consuming. Having the correct green-coded O-ring installation tool and clean PAG oil for lubrication before seating each O-ring makes a significant difference in leak-free results.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"aftermarket-3537501-a-c-line-o-ring","title":"Aftermarket 3537501 A\/C Line O-Ring","description":"\u003ch2\u003eReliable A\/C Line O-Ring for Volvo C30, C70, S40, and V50\u003c\/h2\u003e\u003cp\u003eThis Aftermarket A\/C Line O-Ring, part number 3537501, is designed specifically for select Volvo models including the C30, C70, S40, and V50. It provides a secure seal within the HVAC system to maintain optimal air conditioning performance and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo C30, C70, S40, and V50 models\u003c\/li\u003e\n\u003cli\u003eAftermarket quality A\/C line sealing component\u003c\/li\u003e\n\u003cli\u003ePart number 3537501 for precise identification\u003c\/li\u003e\n\u003cli\u003eEnsures tight sealing to prevent refrigerant loss\u003c\/li\u003e\n\u003cli\u003eDurable material suitable for HVAC system conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Application\u003c\/h2\u003e\u003cp\u003eThe Aftermarket A\/C Line O-Ring 3537501 is engineered to fit the HVAC sealing systems of Volvo vehicles, specifically the C30, C70, S40, and V50. This O-ring is a critical component that seals the connections in the air conditioning lines, helping to maintain system pressure and prevent leaks. Proper sealing is essential for the efficient operation of the vehicle’s air conditioning system, especially in models where OEM parts may be costly or unavailable.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in Volvo C30, C70, S40, and V50 A\/C lines\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling efficiency due to faulty seals\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to A\/C system pressure drops\u003c\/li\u003e\n\u003cli\u003eHelps avoid contamination entering the HVAC system\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged O-rings during A\/C line maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Aftermarket A\/C Line O-Ring 3537501, ensure the mating surfaces are clean and free of debris. Lubricate the O-ring lightly with the appropriate refrigerant oil to facilitate proper seating and prevent damage during installation. Verify compatibility with your specific Volvo model and inspect the A\/C lines for any additional wear or damage before assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThis Aftermarket A\/C Line O-Ring is manufactured to meet industry standards for HVAC sealing components. While no specific warranty information is provided, the part is designed to offer reliable sealing performance consistent with typical aftermarket replacement parts. Proper installation and maintenance will help ensure long-term functionality in Volvo C30, C70, S40, and V50 vehicles.\u003c\/p\u003e","brand":"Aftermarket","offers":[{"title":"Default Title","offer_id":43385542344885,"sku":"DFPG-3537501","price":9.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AQ_3537501_Top.jpg?v=1774704364"},{"product_id":"professional-parts-sweden-87435662-hvac-heater-hose-seal-kit","title":"Professional Parts Sweden 87435662 HVAC Heater Hose Seal Kit","description":"\u003ch2\u003eReliable HVAC Heater Hose Seal Kit for Volvo 850 and S70\u003c\/h2\u003e\u003cp\u003eThe Professional Parts Sweden HVAC Heater Hose Seal Kit (part number 87435662) is designed specifically for Volvo 850 and S70 models. This kit provides a precise sealing solution to maintain the integrity of your vehicle's heating and cooling system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo 850 and S70 models\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary seals for HVAC heater hose connections\u003c\/li\u003e\n\u003cli\u003eEnsures leak-free performance in heating and cooling systems\u003c\/li\u003e\n\u003cli\u003eManufactured by Professional Parts Sweden for consistent quality\u003c\/li\u003e\n\u003cli\u003ePart number 87435662 for accurate identification and fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the HVAC Heater Hose Seal Kit\u003c\/h2\u003e\u003cp\u003eThis HVAC Heater Hose Seal Kit from Professional Parts Sweden is engineered to meet the specific requirements of Volvo 850 and S70 vehicles. The kit contains seals designed to fit heater hose connections, preventing coolant leaks and maintaining proper system pressure. Using the correct seal kit helps avoid common HVAC issues such as coolant loss and inefficient heating. The part number 87435662 ensures compatibility and ease of ordering for these Volvo models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents coolant leaks in the HVAC heater hose connections\u003c\/li\u003e\n\u003cli\u003eMaintains proper pressure within the heating system\u003c\/li\u003e\n\u003cli\u003eReduces risk of overheating due to coolant loss\u003c\/li\u003e\n\u003cli\u003eEliminates air ingress that can cause heater core malfunction\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent cabin heating performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old seals and debris are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Volvo 850 and S70 models prior to installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damaging seals during fitting\u003c\/li\u003e\n\u003cli\u003eCheck for leaks after installation by running the heating system\u003c\/li\u003e\n\u003cli\u003eFollow vehicle manufacturer guidelines for HVAC system maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eProfessional Parts Sweden manufactures this HVAC Heater Hose Seal Kit to meet industry standards for durability and fitment. While specific warranty details may vary, the part number 87435662 is backed by the brand's commitment to quality and reliability for Volvo 850 and S70 applications.\u003c\/p\u003e","brand":"Professional Parts Sweden","offers":[{"title":"Default Title","offer_id":43589974589621,"sku":"FNJW-87435662","price":13.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PS_87435662_Fro.jpg?v=1774972421"},{"product_id":"rein-acr0005r-a-c-line-o-ring","title":"Rein ACR0005R A\/C Line O-Ring","description":"\u003ch2\u003eReliable A\/C Line O-Ring for Mercedes-Benz Models\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0005R A\/C line O-ring is designed specifically for a wide range of Mercedes-Benz vehicles, including popular models like the 300E, 500SL, and C43 AMG. This green, application-specific O-ring ensures a secure seal in your vehicle's HVAC system to maintain optimal air conditioning performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication-specific design for precise fitment on Mercedes-Benz models\u003c\/li\u003e\n\u003cli\u003eDurable green O-ring material engineered for A\/C line sealing\u003c\/li\u003e\n\u003cli\u003ePackaged in a bag containing 20 O-rings for multiple repairs\u003c\/li\u003e\n\u003cli\u003eOE quality standard from Rein, manufactured in Germany\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.2 lb per unit for easy handling and installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0005R A\/C line O-ring is crafted to meet original equipment standards, providing a reliable seal for the air conditioning lines in Mercedes-Benz vehicles. Its green color helps identify the part during installation and maintenance. This product is packaged in a bag containing 20 individual O-rings, making it suitable for professional shops or enthusiasts performing multiple HVAC repairs. Manufactured in Germany, the O-ring reflects Rein's commitment to quality and precision engineering.\u003c\/p\u003e\u003ch2\u003eCompatible Mercedes-Benz Models\u003c\/h2\u003e\u003cp\u003eThis A\/C line O-ring is compatible with a broad range of Mercedes-Benz vehicles, including but not limited to the 190E, 300CE, 300D, 300E, 300SD, 300SDL, 300SE, 300SEL, 300SL, 300TD, 300TE, 350SD, 350SDL, 380SE, 400SE, 420SEL, 500SEC, 500SEL, 500SL, 560SEC, 560SL, C32 AMG, C36 AMG, C43 AMG, C55 AMG, C220, C230, C240, C280, C320, C350, CL55 AMG, CLK55 AMG, CLK320, CLK350, CLK430, CLK500, E55 AMG, E300, E320, E420, E430, E500, S320, S350, S420, S500, S600, SL320, SL500, SL600, SLK230, and SLK320 models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing A\/C refrigerant lines to prevent leaks\u003c\/li\u003e\n\u003cli\u003eMaintaining system pressure for efficient air conditioning\u003c\/li\u003e\n\u003cli\u003eReplacing worn or damaged O-rings during HVAC repairs\u003c\/li\u003e\n\u003cli\u003ePreventing contamination and moisture ingress in A\/C lines\u003c\/li\u003e\n\u003cli\u003eEnsuring long-term durability in high-temperature environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Rein ACR0005R O-ring, ensure the mating surfaces are clean and free of debris. Lubricate the O-ring with the appropriate refrigerant oil to facilitate proper seating and prevent damage during installation. Verify the correct size and application-specific fitment for your Mercedes-Benz model before proceeding. Avoid over-tightening connections to maintain the integrity of the seal.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eRein manufactures the ACR0005R O-ring to meet OE quality standards, ensuring reliable performance and durability. Produced in Germany, this part undergoes strict quality control processes. While specific warranty details may vary, Rein products typically come with a limited warranty against manufacturing defects. Consult your supplier for exact warranty terms.\u003c\/p\u003e","brand":"Rein","offers":[{"title":"Default Title","offer_id":43756543246517,"sku":"DFBS-ACR0005R","price":9.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/C8_ACR0005R_Fro.jpg?v=1774994707"},{"product_id":"rein-acr0008r-a-c-line-o-ring","title":"Rein ACR0008R A\/C Line O-Ring","description":"\u003ch2\u003eReliable A\/C Line O-Ring for Mercedes-Benz Models\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0008R A\/C line O-ring is designed specifically for select Mercedes-Benz vehicles, ensuring a precise fit and dependable sealing performance. This green O-ring is engineered to maintain the integrity of your vehicle's HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication specific design for Mercedes-Benz models\u003c\/li\u003e\n\u003cli\u003eDurable green O-ring material for effective sealing\u003c\/li\u003e\n\u003cli\u003ePackaged in a bag containing 20 individual O-rings\u003c\/li\u003e\n\u003cli\u003eOE quality standard for reliable HVAC system performance\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.2 lb total weight for easy handling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0008R A\/C line O-ring is manufactured in the United States and meets original equipment quality standards. This product is application specific, tailored to fit a wide range of Mercedes-Benz vehicles including the 300CE, 300D, 300E, 300SL, 300TE, 400SE, 500SL, C36 AMG, C43 AMG, C220, C230, C280, CL55 AMG, CL65 AMG, CL500, CL600, CLK55 AMG, CLK320, CLK350, CLK430, CLK500, E55 AMG, E300, E320, E420, E430, E500, S55 AMG, S320, S350, S420, S430, S500, S600, SL320, SL500, and SL600. The green color coding helps with quick identification during installation or maintenance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing A\/C refrigerant lines to prevent leaks\u003c\/li\u003e\n\u003cli\u003eMaintaining proper pressure within the HVAC system\u003c\/li\u003e\n\u003cli\u003eReplacing worn or damaged O-rings in Mercedes-Benz A\/C lines\u003c\/li\u003e\n\u003cli\u003ePreventing contamination and moisture ingress in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEnsuring efficient cooling performance in Mercedes-Benz vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Rein ACR0008R O-ring, ensure the mating surfaces are clean and free of debris. Lubricate the O-ring with the appropriate refrigerant oil to prevent damage during assembly. Verify the correct size and color match for your specific Mercedes-Benz model before installation. Proper seating of the O-ring is critical to avoid leaks and maintain system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eRein A\/C line O-rings are manufactured to meet or exceed OEM standards, providing reliable sealing performance for your Mercedes-Benz HVAC system. This product is backed by Rein's quality assurance processes, ensuring consistent material properties and dimensional accuracy. Please refer to Rein's warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Rein","offers":[{"title":"Default Title","offer_id":43756543312053,"sku":"DFBS-ACR0008R","price":9.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/C8_ACR0008R_Fro.jpg?v=1774994707"},{"product_id":"rein-acr0013r-a-c-line-o-ring","title":"Rein ACR0013R A\/C Line O-Ring","description":"\u003ch2\u003eReliable A\/C Line O-Ring for Audi and Volkswagen Vehicles\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0013R A\/C line O-ring is designed specifically for select Audi and Volkswagen models, ensuring a precise fit and dependable sealing performance. This purple, application-specific O-ring helps maintain the integrity of your vehicle's HVAC system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication-specific design for Audi and Volkswagen models\u003c\/li\u003e\n\u003cli\u003eDurable purple O-ring material for effective sealing\u003c\/li\u003e\n\u003cli\u003ePackaged in quantities of 20 for convenience\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.02 lbs per piece\u003c\/li\u003e\n\u003cli\u003eManufactured in the USA to OE quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Construction and Precise Fit\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0013R A\/C line O-ring is engineered to meet original equipment quality, providing a reliable seal in the HVAC system of compatible vehicles. Its purple color distinguishes it for easy identification during installation. Manufactured in the USA, this O-ring is designed to withstand the pressures and temperatures typical of automotive air conditioning lines, helping to prevent refrigerant leaks and maintain system efficiency.\u003c\/p\u003e\u003ch2\u003eCompatible Audi and Volkswagen Models\u003c\/h2\u003e\u003cp\u003eThis A\/C line O-ring is compatible with a wide range of Audi and Volkswagen vehicles, including but not limited to the Audi A3, A4, A6, A8, Q3, Q7, TT, and Volkswagen Golf, Jetta, Passat, Tiguan, and Touareg models. It fits both standard and Quattro versions, ensuring versatility across many popular trims.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing refrigerant lines in HVAC systems\u003c\/li\u003e\n\u003cli\u003ePreventing refrigerant leaks and loss of cooling efficiency\u003c\/li\u003e\n\u003cli\u003eReplacing worn or damaged O-rings during A\/C system repairs\u003c\/li\u003e\n\u003cli\u003eMaintaining proper pressure within A\/C lines\u003c\/li\u003e\n\u003cli\u003eEnsuring long-term durability under thermal cycling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Rein ACR0013R O-ring, ensure the mating surfaces are clean and free of debris. Lubricate the O-ring with the appropriate refrigerant oil to prevent damage during assembly. Verify the correct size and color to match the original part. Proper installation helps avoid leaks and extends the service life of the HVAC system.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eRein products are manufactured to meet or exceed OE quality standards. The ACR0013R O-ring is produced in the USA, ensuring consistent material quality and manufacturing precision. While specific warranty details may vary, Rein typically backs its products with a limited warranty against defects in material and workmanship.\u003c\/p\u003e","brand":"Rein","offers":[{"title":"Default Title","offer_id":43756543344821,"sku":"DFBS-ACR0013R","price":5.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/C8_ACR0013R_Fro.jpg?v=1774994708"},{"product_id":"rein-acr0020r-a-c-line-o-ring","title":"Rein ACR0020R A\/C Line O-Ring","description":"\u003ch2\u003eReliable A\/C Line O-Ring for Porsche Models\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0020R A\/C line O-ring is designed specifically for Porsche vehicles, including the 911, 928, 968, and Boxster models. This green, application-specific O-ring ensures a secure seal within your vehicle's HVAC system to maintain optimal air conditioning performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication-specific design for Porsche 911, 928, 968, and Boxster\u003c\/li\u003e\n\u003cli\u003eDurable green O-ring material for reliable sealing\u003c\/li\u003e\n\u003cli\u003ePackaged in a bag containing 20 individual O-rings\u003c\/li\u003e\n\u003cli\u003eOE quality standard from Rein, made in the USA\u003c\/li\u003e\n\u003cli\u003eLightweight component, approximately 0.2 lbs per package\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0020R is an OEM-quality A\/C line O-ring engineered to meet the precise requirements of Porsche HVAC systems. Its green color helps with easy identification during installation or maintenance. Each package contains 20 O-rings, providing ample supply for multiple repairs or servicing needs. Manufactured in the United States, this part adheres to strict quality standards to ensure consistent performance and durability.\u003c\/p\u003e\u003ch2\u003eCompatible Porsche Models and Applications\u003c\/h2\u003e\u003cp\u003eThis A\/C line O-ring is compatible with the following Porsche models: 911, 928, 968, and Boxster. It is designed for application-specific use within the HVAC system, ensuring a proper fit and seal for these vehicles. The part number ACR0020R should be referenced when sourcing replacement O-rings for these Porsche models to guarantee compatibility.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in A\/C lines\u003c\/li\u003e\n\u003cli\u003eMaintains system pressure and efficiency\u003c\/li\u003e\n\u003cli\u003eEliminates air intrusion into the HVAC system\u003c\/li\u003e\n\u003cli\u003eHelps avoid costly compressor damage\u003c\/li\u003e\n\u003cli\u003eEnsures consistent cooling performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Rein ACR0020R O-ring, ensure the mating surfaces are clean and free of debris. Lubricate the O-ring with the appropriate refrigerant oil to prevent damage during installation and to improve sealing. Verify the correct size and color match for your Porsche model’s A\/C line connections. Replace any worn or damaged O-rings promptly to maintain system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eRein manufactures the ACR0020R O-ring to meet OE quality standards, providing reliable sealing performance for Porsche HVAC systems. Made in the USA, this product undergoes quality control inspections to ensure consistency. While specific warranty details are not provided, Rein products typically adhere to industry standards for durability and fitment.\u003c\/p\u003e","brand":"Rein","offers":[{"title":"Default Title","offer_id":43756543410357,"sku":"DFBS-ACR0020R","price":9.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/C8_ACR0020R_Fro.jpg?v=1774994708"},{"product_id":"rein-acr0021r-a-c-line-o-ring","title":"Rein ACR0021R A\/C Line O-Ring","description":"\u003ch2\u003eReliable A\/C Line O-Ring for Audi and Volkswagen Models\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0021R A\/C line O-ring is designed specifically for select Audi and Volkswagen vehicles, ensuring a precise fit and dependable sealing performance. This purple, application-specific O-ring helps maintain your HVAC system's integrity by preventing refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication-specific design for accurate fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Audi and Volkswagen models including A4, A5, A6, Q5, and Golf\u003c\/li\u003e\n\u003cli\u003eDurable purple O-ring material for effective sealing\u003c\/li\u003e\n\u003cli\u003ePackaged in quantities of 20 for convenience\u003c\/li\u003e\n\u003cli\u003eManufactured in the US to OE quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable and Precise O-Ring for HVAC Systems\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0021R is an OE quality A\/C line O-ring engineered to meet the exact specifications required by Audi and Volkswagen HVAC systems. Its purple color identifies it for specific application use, reducing the risk of incorrect installation. Weighing approximately 0.2 pounds per unit, this O-ring is designed to provide a secure seal in the A\/C lines, helping to maintain system pressure and prevent refrigerant loss. The product comes in a bulk package of 20 pieces, ideal for professional repair shops or multiple vehicle maintenance.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis A\/C line O-ring is compatible with a range of Audi and Volkswagen models, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAudi A4, A4 Quattro, A5, A5 Quattro, A6, A6 Quattro, A8 Quattro\u003c\/li\u003e\n\u003cli\u003eAudi Q5, Q7, R8, S4, S5, S6, Touareg\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf and Jetta\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUsing the Rein ACR0021R ensures proper sealing for these specific models' HVAC systems, helping maintain optimal air conditioning performance.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This O-Ring\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in A\/C lines\u003c\/li\u003e\n\u003cli\u003eEliminates loss of system pressure\u003c\/li\u003e\n\u003cli\u003eReduces risk of compressor damage due to low refrigerant\u003c\/li\u003e\n\u003cli\u003eHelps avoid moisture ingress into the HVAC system\u003c\/li\u003e\n\u003cli\u003eMaintains consistent cooling performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the O-ring groove and mating surfaces are clean before installation\u003c\/li\u003e\n\u003cli\u003eLubricate the O-ring with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify correct O-ring size and color match for your specific Audi or Volkswagen model\u003c\/li\u003e\n\u003cli\u003eReplace O-rings whenever A\/C lines are disconnected to maintain system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured in the United States, the Rein ACR0021R meets OE quality standards for durability and fitment. While specific warranty details may vary, Rein products typically come with a limited warranty against manufacturing defects. Using this O-ring helps ensure reliable HVAC system performance and longevity.\u003c\/p\u003e","brand":"Rein","offers":[{"title":"Default Title","offer_id":43756543475893,"sku":"DFBS-ACR0021R","price":9.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/C8_ACR0021R_Fro_34115dcb-c4a2-4c4b-afbb-1ccf48012fe3.jpg?v=1774994708"},{"product_id":"rein-acr0022r-a-c-line-o-ring","title":"Rein ACR0022R A\/C Line O-Ring","description":"\u003ch2\u003eReliable A\/C Line O-Ring for Mercedes-Benz Models\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0022R A\/C line O-ring is designed specifically for various Mercedes-Benz vehicles, ensuring a precise fit and dependable sealing performance. Manufactured in Germany, this green O-ring provides a secure seal for your vehicle's HVAC system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication specific design for Mercedes-Benz A\/C lines\u003c\/li\u003e\n\u003cli\u003eDurable green O-ring material for effective sealing\u003c\/li\u003e\n\u003cli\u003ePackaged in quantities of 20 for multiple repairs\u003c\/li\u003e\n\u003cli\u003eOE quality standard from Rein, a trusted automotive parts brand\u003c\/li\u003e\n\u003cli\u003eLightweight component weighing 0.2 lbs per unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0022R is an original equipment quality A\/C line O-ring engineered to meet the exact specifications required by Mercedes-Benz models such as the 190E, 300E, 500SL, C43 AMG, and many others. This green O-ring is application specific, ensuring compatibility and optimal sealing performance within the vehicle's HVAC system. Each unit weighs approximately 0.2 pounds and is packaged in a bag containing 20 pieces, making it suitable for multiple maintenance or repair jobs. Manufactured in Germany, the Rein ACR0022R maintains strict quality standards to provide reliable sealing and prevent refrigerant leaks.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing A\/C refrigerant lines to prevent leaks\u003c\/li\u003e\n\u003cli\u003eReplacing worn or damaged O-rings in Mercedes-Benz HVAC systems\u003c\/li\u003e\n\u003cli\u003eMaintaining system pressure and efficiency in models like the 300SL and E55 AMG\u003c\/li\u003e\n\u003cli\u003ePreventing contamination and moisture ingress in A\/C connections\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment in specific Mercedes-Benz models for reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Rein ACR0022R A\/C line O-ring, ensure the mating surfaces are clean and free of debris. Lubricate the O-ring with the appropriate refrigerant oil to facilitate installation and prevent damage. Verify the correct size and application for your specific Mercedes-Benz model before installation. Proper seating of the O-ring is critical to avoid leaks and maintain system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eRein parts are manufactured to meet or exceed OEM standards, with a focus on durability and fitment accuracy. The ACR0022R A\/C line O-ring is produced in Germany under strict quality controls. While specific warranty details may vary, Rein products typically come with a limited warranty against manufacturing defects, providing confidence in the part's reliability for Mercedes-Benz HVAC repairs.\u003c\/p\u003e","brand":"Rein","offers":[{"title":"Default Title","offer_id":43756543574197,"sku":"DFBS-ACR0022R","price":5.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/C8_ACR0022R_Fro_1ecf4277-1852-4831-9fad-51ecc89099cd.jpg?v=1774994709"},{"product_id":"rein-acr0023r-a-c-line-o-ring","title":"Rein ACR0023R A\/C Line O-Ring","description":"\u003ch2\u003eReliable A\/C Line O-Ring for BMW, Mini, and Rolls-Royce Models\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0023R A\/C Line O-Ring is designed specifically for select BMW, Mini, and Rolls-Royce vehicles. This green, application-specific o-ring ensures a secure seal within your vehicle's HVAC system, helping maintain optimal air conditioning performance.\u003c\/p\u003e\u003ch2\u003eKey Features of Rein ACR0023R A\/C Line O-Ring\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eApplication-specific design for precise fitment\u003c\/li\u003e\n\u003cli\u003eGreen color for easy identification during installation\u003c\/li\u003e\n\u003cli\u003ePackaged in a bag containing 20 individual o-rings\u003c\/li\u003e\n\u003cli\u003eOE quality standard for reliable sealing performance\u003c\/li\u003e\n\u003cli\u003eManufactured in the United States ensuring consistent quality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0023R is an original equipment quality A\/C line o-ring engineered to meet the exact specifications required by BMW, Mini, and Rolls-Royce models. Its green color coding helps technicians quickly identify the correct part during HVAC system repairs or maintenance. Each package contains 20 o-rings, providing ample supply for multiple repairs or servicing needs. Weighing approximately 0.2 pounds per unit, these o-rings are compact and easy to handle. Designed to maintain a tight seal in the A\/C lines, the Rein ACR0023R helps prevent refrigerant leaks and ensures efficient air conditioning system operation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMW 1 Series M, 128i, 135i, 228i, 318i, 320i, 323i, 325i, 328i, 330i, 335i, 428i, 435i, 525i, 528i, 530i, 535i, 540i, 545i, 550i, 640i, 645Ci, 650i, 740i, 745i, 750i, 760i, M2, M3, M4, M5, M6, X1, X3, X5, Z4, and others\u003c\/li\u003e\n\u003cli\u003eMini Cooper, Cooper Clubman, Cooper Countryman, Cooper Paceman\u003c\/li\u003e\n\u003cli\u003eRolls-Royce Dawn, Ghost, Phantom, Wraith\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by Rein ACR0023R O-Ring\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in A\/C lines\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling efficiency due to poor seals\u003c\/li\u003e\n\u003cli\u003eReduces risk of compressor damage from low refrigerant levels\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper system pressure and performance\u003c\/li\u003e\n\u003cli\u003ePrevents contamination entry into the HVAC system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the correct Rein ACR0023R o-ring is selected for your specific BMW, Mini, or Rolls-Royce model\u003c\/li\u003e\n\u003cli\u003eClean mating surfaces thoroughly before installation to ensure a proper seal\u003c\/li\u003e\n\u003cli\u003eLubricate the o-ring with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eInspect the o-ring for any defects or damage prior to installation\u003c\/li\u003e\n\u003cli\u003eReplace o-rings whenever A\/C lines are disconnected to maintain system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eRein manufactures the ACR0023R A\/C line o-ring to meet original equipment standards, ensuring reliable sealing performance and durability. Made in the USA, this product undergoes strict quality control processes. While specific warranty details may vary, Rein products typically come with a limited warranty against manufacturing defects. Always consult product documentation or your parts supplier for warranty terms.\u003c\/p\u003e","brand":"Rein","offers":[{"title":"Default Title","offer_id":43756543738037,"sku":"DFBS-ACR0023R","price":5.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/C8_ACR0023R_Fro.jpg?v=1774994709"},{"product_id":"rein-acr0025r-a-c-line-o-ring","title":"Rein ACR0025R A\/C Line O-Ring","description":"\u003ch2\u003eReliable Rein A\/C Line O-Ring for Volvo Vehicles\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0025R A\/C line O-ring is designed specifically for select Volvo models, ensuring a precise fit and dependable sealing performance. Manufactured in the USA, this yellow O-ring provides a secure seal for your vehicle's HVAC system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication specific design for Volvo models including 240, 740, 745, 760, 850, 940, 960, C70, S40, S60, S70, S80, S90, V40, V70, and V90\u003c\/li\u003e\n\u003cli\u003eDurable yellow O-ring material engineered for A\/C line sealing\u003c\/li\u003e\n\u003cli\u003ePackaged in quantities of 20 for efficient maintenance and repairs\u003c\/li\u003e\n\u003cli\u003eOE quality standard ensuring compatibility and reliability\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.2 lb per unit for easy handling and installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Rein ACR0025R is an original equipment quality A\/C line O-ring designed to maintain the integrity of your vehicle’s air conditioning system. Its application-specific design matches the exact requirements of various Volvo models, providing a tight seal to prevent refrigerant leaks. The yellow color aids in quick identification during service. Each O-ring is packaged in a bag containing 20 pieces, making it suitable for professional shops or DIY enthusiasts performing multiple repairs. Manufactured in the United States, this part meets stringent quality standards for durability and performance.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in Volvo A\/C lines\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged O-rings causing low A\/C pressure\u003c\/li\u003e\n\u003cli\u003eEliminates moisture ingress that can damage the HVAC system\u003c\/li\u003e\n\u003cli\u003eRestores proper sealing to improve A\/C system efficiency\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to A\/C line disconnections or repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Rein ACR0025R O-ring, ensure the mating surfaces are clean and free of debris. Lubricate the O-ring with the appropriate refrigerant oil to prevent damage during assembly. Verify the correct size and color match for your specific Volvo model before installation. Proper seating of the O-ring is critical to avoid leaks. Use caution to avoid twisting or pinching the O-ring during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eRein parts are manufactured to meet or exceed OEM specifications, providing reliable performance for your Volvo vehicle. The ACR0025R O-ring is backed by Rein’s quality assurance processes. While specific warranty details may vary, Rein products typically come with a limited warranty against defects in material and workmanship. For detailed warranty information, refer to Rein’s official documentation.\u003c\/p\u003e","brand":"Rein","offers":[{"title":"Default Title","offer_id":43756543934645,"sku":"DFBS-ACR0025R","price":9.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/C8_ACR0025R_Fro_a03a5b6d-2882-4c15-a838-b8a2b39e14e8.jpg?v=1774994709"},{"product_id":"global-parts-1311245-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311245 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Select GM and Isuzu Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311245 A\/C System O-Ring and Gasket Kit is designed specifically for a range of Buick, Cadillac, Chevrolet, GMC, Isuzu, Oldsmobile, and Pontiac models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and ensure efficient air conditioning performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for multiple GM and Isuzu models including Chevrolet Silverado, GMC Sierra, Buick LeSabre, and Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality O-rings and gaskets engineered for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1311245 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent refrigerant leaks and maintain system pressure\u003c\/li\u003e\n\u003cli\u003eDurable materials resistant to heat, pressure, and refrigerants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific vehicle applications, ensuring a precise fit and reliable sealing performance. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks, which can reduce cooling efficiency and potentially damage the compressor. Compatible with a wide range of models such as the Chevrolet Camaro, GMC Yukon, Buick Century, and Pontiac Firebird, this kit supports maintenance and repair tasks for HVAC systems in these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in A\/C system connections and fittings\u003c\/li\u003e\n\u003cli\u003eRestoring proper refrigerant pressure and preventing loss\u003c\/li\u003e\n\u003cli\u003eEliminating moisture intrusion that can cause system corrosion\u003c\/li\u003e\n\u003cli\u003eReducing compressor wear due to refrigerant loss\u003c\/li\u003e\n\u003cli\u003eImproving overall air conditioning system performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific vehicle make and model using part number 1311245\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris before installing new seals\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings and connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. The materials used are selected for durability and resistance to refrigerants and environmental conditions. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure customer confidence in product reliability.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803856044213,"sku":"BKNH-1311245","price":13.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311245_Fro.jpg?v=1774998843"},{"product_id":"global-parts-1311248-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311248 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eOverview of Global Parts A\/C System O-Ring and Gasket Kit\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311248 A\/C System O-Ring and Gasket Kit is designed specifically for select Buick and Ford vehicles. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring reliable performance and preventing refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Buick LeSabre and Ford Bronco, E-100, E-150, E-250, E-350 Econoline series, and F-150, F-250, F-350 models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1311248 ensures compatibility with designated vehicles\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper refrigerant pressure and prevent leaks\u003c\/li\u003e\n\u003cli\u003eDurable materials engineered for HVAC system longevity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts, part number 1311248, is tailored for specific Buick and Ford models, including the Ford Bronco, E-100 Econoline, E-150 Econoline, E-250 Econoline, E-350 Econoline, and F-Series trucks such as the F-150, F-250, and F-350, as well as the Buick LeSabre. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the vehicle's HVAC system. Proper sealing is critical to maintaining refrigerant pressure and preventing leaks that can reduce cooling efficiency or cause system failure.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in A\/C system connections\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling performance due to seal degradation\u003c\/li\u003e\n\u003cli\u003eAddresses compressor seal failures and line connection leaks\u003c\/li\u003e\n\u003cli\u003eHelps avoid contamination entering the HVAC system\u003c\/li\u003e\n\u003cli\u003eSupports maintenance and repair of factory HVAC seals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Buick or Ford model before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings\u003c\/li\u003e\n\u003cli\u003eInspect HVAC components for wear or damage during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM specifications for fit and function. The kit undergoes quality control to ensure durability and proper sealing performance. While specific warranty details are not provided, Global Parts products typically come with a limited warranty against defects in materials and workmanship. Consult product documentation or contact the manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803856765109,"sku":"BKNH-1311248","price":18.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311248_Fro.jpg?v=1774998843"},{"product_id":"global-parts-1311262-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311262 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Ford and Mercury Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311262 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford and Mercury models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford and Mercury models including Aerostar, Bronco, Mustang, and more\u003c\/li\u003e\n\u003cli\u003eComplete set of O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003eDurable materials engineered to withstand HVAC system pressures and temperatures\u003c\/li\u003e\n\u003cli\u003ePart number 1311262 ensures compatibility with designated vehicles\u003c\/li\u003e\n\u003cli\u003eHelps maintain optimal A\/C system performance and efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific Ford and Mercury vehicles such as the F-150, E-350 Econoline, Cougar, and Thunderbird. The kit includes all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to prevent refrigerant leaks, which can reduce cooling efficiency and cause system damage. Using part number 1311262 guarantees that you receive the correct components designed to fit the unique specifications of your vehicle’s A\/C system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling performance due to faulty seals\u003c\/li\u003e\n\u003cli\u003eResolves issues related to compressor seal failure\u003c\/li\u003e\n\u003cli\u003eHelps avoid contamination entering the HVAC system\u003c\/li\u003e\n\u003cli\u003eAddresses wear and tear from age or previous repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Ford or Mercury model using part number 1311262\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris prior to assembly\u003c\/li\u003e\n\u003cli\u003eTighten fittings to manufacturer torque specifications to avoid leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. While specific warranty details may vary, Global Parts typically offers coverage against defects in materials and workmanship. Using part number 1311262 ensures you receive a product engineered for durability and reliable sealing performance in your Ford or Mercury vehicle.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803857453237,"sku":"BKNH-1311262","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311262_Fro.jpg?v=1774998844"},{"product_id":"global-parts-1311302-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311302 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler, Dodge, Plymouth\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311302 A\/C System O-Ring and Gasket Kit is designed specifically for select Chrysler, Dodge, and Plymouth vehicles. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chrysler, Dodge, and Plymouth models including Caravan, Ram 1500 Van, and Neon\u003c\/li\u003e\n\u003cli\u003eComplete set of O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003eDurable materials engineered for HVAC system compatibility\u003c\/li\u003e\n\u003cli\u003ePart number 1311302 ensures precise replacement parts\u003c\/li\u003e\n\u003cli\u003eCompatible with models such as Dodge Dakota, Plymouth Sundance, and Chrysler Town \u0026amp; Country\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1311302 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific vehicle applications, ensuring a proper fit and reliable sealing performance. The kit includes all necessary O-rings and gaskets required for servicing the air conditioning system on various Chrysler, Dodge, and Plymouth models. By using this kit, technicians can effectively restore the sealing surfaces within the HVAC system, reducing the risk of refrigerant leaks and maintaining system efficiency. The part number 1311302 corresponds to a kit designed for models such as the Dodge Ramcharger, Plymouth Acclaim, and Chrysler Imperial, among others.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in A\/C system connections\u003c\/li\u003e\n\u003cli\u003eRestores proper sealing after component replacement or repair\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling performance due to worn seals\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to compressor and condenser connections\u003c\/li\u003e\n\u003cli\u003eHelps maintain system pressure and efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Chrysler, Dodge, or Plymouth model before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings\u003c\/li\u003e\n\u003cli\u003eInspect all sealing surfaces for damage prior to assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1311302 A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. Each component is tested for durability and compatibility with HVAC refrigerants. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure customer confidence in product reliability.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803857911989,"sku":"BKNH-1311302","price":8.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311302_Fro.jpg?v=1774998844"},{"product_id":"global-parts-1311335-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311335 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Select GM Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311335 A\/C System O-Ring and Gasket Kit is designed specifically for a range of General Motors vehicles including Buick, Cadillac, Chevrolet, GMC, Oldsmobile, and Pontiac models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for GM makes and models such as Chevrolet Blazer, Cadillac DeVille, Pontiac Grand Prix, and more\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1311335 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent refrigerant leaks and maintain system pressure\u003c\/li\u003e\n\u003cli\u003eCompatible with various models including Chevrolet C10, GMC Suburban, and Buick LeSabre\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific fitment across multiple GM vehicle lines. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks, which can reduce cooling efficiency and cause system damage. The kit is compatible with a wide range of models such as the Chevrolet Camaro, Pontiac Firebird, Cadillac Fleetwood, and GMC Sierra series, ensuring a precise fit and reliable performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to restore proper refrigerant pressure\u003c\/li\u003e\n\u003cli\u003eReplacing brittle or cracked O-rings and gaskets due to age or wear\u003c\/li\u003e\n\u003cli\u003ePreventing moisture intrusion that can damage A\/C components\u003c\/li\u003e\n\u003cli\u003eEliminating refrigerant loss that leads to reduced cooling efficiency\u003c\/li\u003e\n\u003cli\u003eMaintaining system integrity after component repairs or replacements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific vehicle make and model before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings to avoid leaks\u003c\/li\u003e\n\u003cli\u003eInspect A\/C system components for wear or damage during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts maintains strict quality control standards for their HVAC sealing systems. The 1311335 A\/C System O-Ring and Gasket Kit is manufactured to meet OEM specifications for fit and function. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure customer confidence in product reliability.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803858665653,"sku":"BKNH-1311335","price":9.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311335_Fro.jpg?v=1774998844"},{"product_id":"global-parts-1311336-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311336 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eOverview of Global Parts A\/C System O-Ring and Gasket Kit\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311336 A\/C System O-Ring and Gasket Kit is designed specifically for select Chevrolet, Oldsmobile, and Pontiac models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chevrolet Cutlass Supreme, Oldsmobile Cutlass Supreme, Pontiac Grand Prix, and Chevrolet Lumina\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1311336 for precise identification and compatibility\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain system pressure and prevent refrigerant leaks\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored to fit specific vehicle models, including the Chevrolet Cutlass Supreme, Oldsmobile Cutlass Supreme, Pontiac Grand Prix, and Chevrolet Lumina. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to maintaining refrigerant pressure and preventing leaks that can reduce cooling efficiency or cause system failure. Using part number 1311336 ensures you receive the correct components designed for these particular makes and models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling performance due to faulty seals\u003c\/li\u003e\n\u003cli\u003eAddresses compressor seal failures and connection leaks\u003c\/li\u003e\n\u003cli\u003eHelps maintain system pressure for optimal HVAC operation\u003c\/li\u003e\n\u003cli\u003eReplaces aged or brittle O-rings and gaskets prone to cracking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Chevrolet Cutlass Supreme, Oldsmobile Cutlass Supreme, Pontiac Grand Prix, or Chevrolet Lumina before installation\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris to ensure proper sealing\u003c\/li\u003e\n\u003cli\u003eTighten connections to manufacturer torque specifications to avoid leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Using part number 1311336 guarantees compatibility and quality consistent with OEM requirements for Chevrolet, Oldsmobile, and Pontiac vehicles.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803858993333,"sku":"BKNH-1311336","price":20.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311336_Fro.jpg?v=1774998845"},{"product_id":"global-parts-1311337-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311337 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Select GM Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311337 A\/C System O-Ring and Gasket Kit is designed specifically for a range of General Motors vehicles including Buick, Cadillac, Chevrolet, GMC, Oldsmobile, and Pontiac models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for GM makes and models such as Chevrolet Silverado, GMC Sierra, Cadillac Escalade, Buick LeSabre, and Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality O-rings and gaskets engineered for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1311337 ensures compatibility with designated vehicles\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent refrigerant leaks and maintain system pressure\u003c\/li\u003e\n\u003cli\u003eDurable materials resistant to heat, pressure, and refrigerant exposure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific GM vehicles, ensuring a precise fit and reliable sealing performance. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks, which can reduce cooling efficiency and cause system damage. Compatible with models such as the Chevrolet Tahoe, GMC Yukon XL 1500, Cadillac DeVille, Buick Century, and Pontiac Firebird, this kit supports a wide range of applications across multiple GM brands.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in A\/C compressor connections\u003c\/li\u003e\n\u003cli\u003ePreventing refrigerant loss from evaporator and condenser fittings\u003c\/li\u003e\n\u003cli\u003eReplacing brittle or cracked O-rings and gaskets due to age or heat exposure\u003c\/li\u003e\n\u003cli\u003eRestoring proper system pressure for efficient cooling\u003c\/li\u003e\n\u003cli\u003eEliminating moisture ingress that can damage A\/C components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify part number 1311337 matches your vehicle’s specific A\/C system requirements\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings to avoid leaks\u003c\/li\u003e\n\u003cli\u003eInspect related A\/C components for wear or damage during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. Each component is made from materials designed to withstand the thermal and chemical stresses of automotive air conditioning systems. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure product reliability and customer confidence.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803859124405,"sku":"BKNH-1311337","price":5.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311337_Fro.jpg?v=1774998845"},{"product_id":"global-parts-1311338-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311338 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Select GM Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311338 A\/C System O-Ring and Gasket Kit is designed specifically for various Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1311338 ensures compatibility with targeted vehicles\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper refrigerant pressure and prevent leaks\u003c\/li\u003e\n\u003cli\u003eDurable materials engineered for automotive HVAC applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311338 A\/C System O-Ring and Gasket Kit is tailored for specific GM vehicles including Buick models like the LeSabre and Park Avenue, Chevrolet trucks such as the C1500 and S10, GMC SUVs like the Yukon, and Pontiac models including the Grand Am and Sunbird. This kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to maintaining system pressure and preventing refrigerant loss, which can lead to reduced cooling performance and potential system damage.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in A\/C system connections\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling efficiency due to seal failure\u003c\/li\u003e\n\u003cli\u003eResolves issues related to compressor or condenser leaks\u003c\/li\u003e\n\u003cli\u003eHelps avoid contamination entering the HVAC system\u003c\/li\u003e\n\u003cli\u003eSupports maintenance and repair of factory-installed A\/C components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify correct part number 1311338 for your specific vehicle model\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling A\/C components\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1311338 A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. Each component is engineered for durability and resistance to refrigerants and automotive chemicals. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure customer confidence in product reliability.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803859517621,"sku":"BKNH-1311338","price":10.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311338_Fro.jpg?v=1774998845"},{"product_id":"global-parts-1311366-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311366 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Buick LeSabre\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311366 A\/C System O-Ring and Gasket Kit is designed specifically for the Buick LeSabre. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and ensure efficient air conditioning performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Buick LeSabre models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1311366 for precise identification\u003c\/li\u003e\n\u003cli\u003eCompatible with HVAC sealing system repairs\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered to meet the exact specifications required for the Buick LeSabre. The kit contains a selection of O-rings and gaskets designed to replace worn or damaged seals within the vehicle's HVAC system. Proper sealing is critical to prevent refrigerant leaks and maintain optimal air conditioning performance. Using part number 1311366 ensures you receive components tailored to the Buick LeSabre's system, avoiding compatibility issues common with universal kits.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to prevent refrigerant loss\u003c\/li\u003e\n\u003cli\u003eReplacing deteriorated or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eRestoring proper pressure and efficiency in the HVAC system\u003c\/li\u003e\n\u003cli\u003eEliminating moisture intrusion that can damage system components\u003c\/li\u003e\n\u003cli\u003eReducing the risk of compressor failure due to leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Global Parts 1311366 kit, ensure all old seals are completely removed and mating surfaces are clean. Lubricate O-rings with the appropriate refrigerant oil to prevent damage during assembly. Verify that each gasket and O-ring matches the original part in size and shape before installation. Proper torque specifications should be followed to avoid over-tightening, which can cause leaks or damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. While specific warranty details are not provided, Global Parts products typically undergo quality control to ensure reliable performance in HVAC sealing applications. Using part number 1311366 guarantees compatibility with Buick LeSabre models, supporting long-term system integrity.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803859681461,"sku":"BKNH-1311366","price":8.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311366_Fro.jpg?v=1774998847"},{"product_id":"global-parts-1311368-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1311368 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Buick LeSabre\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1311368 A\/C System O-Ring and Gasket Kit is designed specifically for the Buick LeSabre. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and ensure efficient air conditioning performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Buick LeSabre models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003eDurable materials designed to withstand HVAC system pressures and temperatures\u003c\/li\u003e\n\u003cli\u003ePart number 1311368 ensures correct replacement components\u003c\/li\u003e\n\u003cli\u003eCompatible with factory specifications for reliable sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1311368 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered to meet the exact specifications required for the Buick LeSabre. The kit contains a selection of O-rings and gaskets that are critical for preventing refrigerant leaks and maintaining system pressure. Each component is manufactured to provide a precise fit, ensuring the HVAC system operates efficiently without loss of refrigerant or air contamination. Using part number 1311368 guarantees compatibility and helps avoid common issues related to improper sealing.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates air contamination that reduces cooling efficiency\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged O-rings and gaskets in HVAC components\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper system pressure for consistent cooling\u003c\/li\u003e\n\u003cli\u003eAddresses common seal failures in Buick LeSabre A\/C systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify part number 1311368 matches your vehicle’s requirements before installation\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris to ensure proper sealing\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling HVAC components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for durability and performance. The kit is designed for specific fitment with Buick LeSabre models, ensuring reliable sealing and system integrity. While warranty details may vary, Global Parts typically offers coverage against manufacturing defects to provide confidence in product quality.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803861549237,"sku":"BKNH-1311368","price":8.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1311368_Fro.jpg?v=1774998847"},{"product_id":"global-parts-1321234-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321234 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler, Dodge, and Plymouth\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321234 A\/C System O-Ring and Gasket Kit is designed specifically for select Chrysler, Dodge, and Plymouth vehicles. This kit provides the necessary sealing components to maintain the integrity of your vehicle’s HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chrysler, Dodge, and Plymouth models including Acclaim, Aries, Dakota, and Ramcharger\u003c\/li\u003e\n\u003cli\u003eComplete set of O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003eDurable materials engineered to withstand HVAC system pressures and temperatures\u003c\/li\u003e\n\u003cli\u003ePart number 1321234 ensures exact replacement compatibility\u003c\/li\u003e\n\u003cli\u003eCompatible with models such as Dodge Dakota, Plymouth Sundance, and Chrysler LeBaron\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific vehicle applications, ensuring a precise fit and reliable sealing performance. The kit includes all necessary O-rings and gaskets required for servicing the HVAC system on Chrysler, Dodge, and Plymouth vehicles. By using part number 1321234, technicians can confidently replace worn or damaged seals to restore proper refrigerant containment and system efficiency. The kit supports a range of models including the Dodge Dakota, Plymouth Sundance, Chrysler LeBaron, and others, making it a practical choice for maintaining older and classic vehicles within these brands.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling performance due to seal failure\u003c\/li\u003e\n\u003cli\u003eStops moisture intrusion that can damage HVAC components\u003c\/li\u003e\n\u003cli\u003eReduces the risk of compressor damage caused by low refrigerant levels\u003c\/li\u003e\n\u003cli\u003eRestores proper system pressure and efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Chrysler, Dodge, or Plymouth model before installation\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris to ensure a proper seal\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling HVAC components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. The materials used are selected for durability under typical HVAC operating conditions. Part number 1321234 is backed by Global Parts’ quality assurance processes, providing confidence in the longevity and reliability of the seals. Warranty details are available through Global Parts and typically cover defects in material and workmanship.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803891007669,"sku":"BKNH-1321234","price":13.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321234_Fro.jpg?v=1774998863"},{"product_id":"global-parts-1321235-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321235 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321235 A\/C System O-Ring and Gasket Kit is designed specifically for Chrysler Dynasty, Imperial, and New Yorker models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fit for Chrysler Dynasty, Imperial, and New Yorker models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321235 ensures correct replacement parts\u003c\/li\u003e\n\u003cli\u003eCompatible with HVAC sealing systems to prevent leaks\u003c\/li\u003e\n\u003cli\u003eDurable materials designed for automotive HVAC applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321235 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored to fit specific Chrysler models, including the Dynasty, Imperial, and New Yorker. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to prevent refrigerant leaks and maintain system efficiency. Using part number 1321235 ensures compatibility and reliable performance in your vehicle's air conditioning system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to maintain refrigerant pressure\u003c\/li\u003e\n\u003cli\u003eReplacing aged or brittle O-rings and gaskets in Chrysler HVAC systems\u003c\/li\u003e\n\u003cli\u003ePreventing moisture and contaminants from entering the A\/C system\u003c\/li\u003e\n\u003cli\u003eRestoring proper function to the air conditioning system in Dynasty, Imperial, and New Yorker models\u003c\/li\u003e\n\u003cli\u003eReducing the risk of compressor damage due to leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify part number 1321235 matches your vehicle’s requirements before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling HVAC components\u003c\/li\u003e\n\u003cli\u003eInspect all sealing surfaces for damage or debris prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM specifications for Chrysler vehicles. The kit undergoes quality control to ensure proper fit and function. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Using part number 1321235 guarantees you receive components designed for the Chrysler Dynasty, Imperial, and New Yorker HVAC systems.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803891105973,"sku":"BKNH-1321235","price":16.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321235_Fro.jpg?v=1774998863"},{"product_id":"global-parts-1321236-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321236 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler, Dodge, and Plymouth\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321236 A\/C System O-Ring and Gasket Kit is designed specifically for select Chrysler, Dodge, and Plymouth models. This kit provides the necessary sealing components to maintain the integrity of your vehicle’s HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chrysler Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, and Voyager models\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality O-rings and gaskets tailored for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321236 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper refrigerant pressure and prevent leaks\u003c\/li\u003e\n\u003cli\u003eDurable materials resistant to heat, pressure, and refrigerants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific fitment on Chrysler, Dodge, and Plymouth vehicles including the Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, and Voyager. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to maintaining system pressure and preventing refrigerant loss, which can lead to reduced cooling performance and potential system damage. Using part number 1321236 ensures you receive the correct components designed to meet OEM specifications for these models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks caused by worn or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eEliminates A\/C system pressure loss leading to inefficient cooling\u003c\/li\u003e\n\u003cli\u003eHelps avoid contamination and moisture ingress into the HVAC system\u003c\/li\u003e\n\u003cli\u003eAddresses common sealing failures in Chrysler Caravan and Town \u0026amp; Country A\/C systems\u003c\/li\u003e\n\u003cli\u003eRestores proper sealing to maintain system longevity and performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify part number 1321236 matches your vehicle’s specific model and year\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris before installing new seals\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings to avoid leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for durability and performance. Each component is tested for material integrity and fitment accuracy. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure reliability and customer confidence in part number 1321236.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803891204277,"sku":"BKNH-1321236","price":13.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321236_Fro.jpg?v=1774998864"},{"product_id":"global-parts-1321237-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321237 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler, Dodge, and Plymouth\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321237 A\/C System O-Ring and Gasket Kit is designed specifically for select Chrysler, Dodge, and Plymouth models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chrysler Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, and Voyager models\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality O-rings and gaskets tailored for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321237 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper sealing under HVAC system pressure and temperature variations\u003c\/li\u003e\n\u003cli\u003eGTIN 00844434039867 for accurate product tracking and verification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific fitment on Chrysler, Dodge, and Plymouth vehicles including Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, and Voyager. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks, maintain system pressure, and ensure efficient HVAC operation. Using part number 1321237 guarantees that you receive the correct components designed to meet OEM specifications for these vehicle models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks caused by degraded or damaged O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eEliminates A\/C system pressure loss leading to reduced cooling performance\u003c\/li\u003e\n\u003cli\u003eResolves issues related to moisture ingress and contamination in the HVAC system\u003c\/li\u003e\n\u003cli\u003eHelps avoid costly compressor damage due to improper sealing\u003c\/li\u003e\n\u003cli\u003eRestores proper sealing after A\/C system repairs or component replacements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Chrysler, Dodge, or Plymouth model before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings to avoid leaks\u003c\/li\u003e\n\u003cli\u003eInspect all sealing surfaces for damage or debris prior to assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for durability and performance. The kit is produced with materials designed to withstand the temperature and pressure conditions typical of automotive HVAC systems. While specific warranty details may vary, Global Parts generally offers coverage against manufacturing defects to ensure customer confidence in product reliability.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803891499189,"sku":"BKNH-1321237","price":16.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321237_Fro_1a2338c4-b397-43bd-81d3-d5d1b07b6da5.jpg?v=1774998864"},{"product_id":"global-parts-1321238-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321238 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler and Dodge\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321238 A\/C System O-Ring and Gasket Kit is designed specifically for select Chrysler and Dodge models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chrysler 300M, Concorde, Intrepid, LHS, and Dodge Sebring\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321238 ensures compatibility and quality\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper HVAC system pressure and prevent refrigerant leaks\u003c\/li\u003e\n\u003cli\u003eDurable materials engineered for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321238 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific Chrysler and Dodge vehicles, including the 300M, Concorde, Intrepid, LHS, and Sebring models. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to maintaining system pressure and preventing refrigerant loss, which can lead to reduced cooling efficiency or system failure. Using part number 1321238 ensures you receive components that meet the exact specifications required for these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling performance due to faulty seals\u003c\/li\u003e\n\u003cli\u003eAddresses compressor seal failures and gasket wear\u003c\/li\u003e\n\u003cli\u003eHelps avoid contamination entering the HVAC system\u003c\/li\u003e\n\u003cli\u003eSupports maintenance and repair of factory-installed A\/C components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Chrysler 300M, Concorde, Intrepid, LHS, and Dodge Sebring models before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling A\/C components\u003c\/li\u003e\n\u003cli\u003eInspect all mating surfaces for damage or debris to ensure proper sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321238 A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. Each component undergoes quality checks to ensure durability and reliability in HVAC applications. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to provide confidence in the product's performance.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803893170357,"sku":"BKNH-1321238","price":15.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321238_Fro_14cfae79-b4ec-4e9a-ad47-296ab8acdbeb.jpg?v=1774998864"},{"product_id":"global-parts-1321239-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321239 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler, Dodge, Plymouth\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321239 A\/C System O-Ring and Gasket Kit is designed specifically for select Chrysler, Dodge, and Plymouth models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chrysler Breeze, Dodge Cirrus, Plymouth Sebring, and Dodge Stratus\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003eEnsures proper sealing to prevent refrigerant loss and system contamination\u003c\/li\u003e\n\u003cli\u003eDurable materials designed for automotive HVAC applications\u003c\/li\u003e\n\u003cli\u003ePart number 1321239 for easy identification and compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321239 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered to meet the exact specifications required by Chrysler, Dodge, and Plymouth vehicles, including the Breeze, Cirrus, Sebring, and Stratus models. The kit contains a selection of O-rings and gaskets tailored to the HVAC system's sealing points, ensuring a tight fit and reliable performance. Using the correct sealing components helps maintain system pressure and prevents leaks that can lead to decreased cooling efficiency or component damage. The part number 1321239 corresponds to this specific kit, making it easier to source the right parts for your vehicle's A\/C system maintenance or repair.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged A\/C system O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003ePrevention of refrigerant leaks in Chrysler Breeze, Dodge Cirrus, Plymouth Sebring, and Dodge Stratus\u003c\/li\u003e\n\u003cli\u003eRestoring proper sealing after A\/C system component replacement or service\u003c\/li\u003e\n\u003cli\u003eEliminating system contamination caused by compromised seals\u003c\/li\u003e\n\u003cli\u003eMaintaining optimal HVAC system performance and efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific vehicle model and year before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings and connections\u003c\/li\u003e\n\u003cli\u003eInspect all sealing surfaces for damage or debris prior to installing new components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for automotive HVAC sealing components. The kit is designed for durability and reliable performance in the specified Chrysler, Dodge, and Plymouth models. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure customer confidence in product quality.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803893268661,"sku":"BKNH-1321239","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321239_Fro.jpg?v=1774998865"},{"product_id":"global-parts-1321240-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321240 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler and Dodge\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321240 A\/C System O-Ring and Gasket Kit is designed specifically for select Chrysler and Dodge models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chrysler Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, and Voyager models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321240 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper HVAC system pressure and prevent refrigerant leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321240 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific Chrysler and Dodge vehicles, including the Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, and Voyager. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to maintaining refrigerant pressure and preventing leaks that can reduce cooling efficiency or cause system failure. Using part number 1321240 ensures you receive the correct components designed for your vehicle's A\/C system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling performance due to faulty seals\u003c\/li\u003e\n\u003cli\u003eAddresses compressor seal failures and gasket wear\u003c\/li\u003e\n\u003cli\u003eHelps maintain system pressure for optimal HVAC operation\u003c\/li\u003e\n\u003cli\u003eReduces risk of contamination entering the A\/C system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific Chrysler or Dodge model before installation\u003c\/li\u003e\n\u003cli\u003eClean all mating surfaces thoroughly before applying new O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eLubricate O-rings with appropriate refrigerant oil to prevent damage during installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings and connections\u003c\/li\u003e\n\u003cli\u003eInspect the entire A\/C system for additional wear or damage during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321240 A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Using this kit helps maintain the integrity of your vehicle’s HVAC system with components designed for precise fit on Chrysler Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, and Voyager models.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803893498037,"sku":"BKNH-1321240","price":12.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321240_Fro.jpg?v=1774998865"},{"product_id":"global-parts-1321241-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321241 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321241 A\/C System O-Ring and Gasket Kit is designed specifically for select Dodge models, ensuring a precise fit and effective sealing. This kit supports proper HVAC system function by preventing leaks and maintaining system pressure.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Dodge D250, D350, Dakota, Monaco, Ram 1500, Ram 2500, Ram 3500, Ramcharger, W250, and W350 models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321241 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality and durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321241 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered to meet the specific sealing requirements of various Dodge trucks and SUVs. The kit contains all necessary components to replace worn or damaged O-rings and gaskets within the HVAC system, helping to maintain refrigerant integrity and prevent leaks. Designed for specific fitment, this kit supports models including the Dodge Ram 1500, Ram 2500, Ram 3500, Dakota, and others, ensuring a precise match to factory specifications.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling efficiency due to worn seals\u003c\/li\u003e\n\u003cli\u003eReduces risk of compressor damage from low refrigerant levels\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper system pressure and performance\u003c\/li\u003e\n\u003cli\u003eAddresses HVAC system noise caused by faulty seals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Dodge model and year before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts maintains strict quality control standards for part number 1321241, ensuring reliable performance and durability. While specific warranty details may vary, this kit is manufactured to meet OEM standards for HVAC sealing components, providing confidence in its fit and function for Dodge D250, D350, Dakota, Monaco, Ram 1500, Ram 2500, Ram 3500, Ramcharger, W250, and W350 vehicles.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803893563573,"sku":"BKNH-1321241","price":12.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321241_Fro.jpg?v=1774998865"},{"product_id":"global-parts-1321242-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321242 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eOverview of Global Parts A\/C System O-Ring and Gasket Kit\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321242 A\/C System O-Ring and Gasket Kit is designed specifically for Dodge Durango models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring reliable performance and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Dodge Durango models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321242 for precise identification\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality\u003c\/li\u003e\n\u003cli\u003eCompatible with HVAC sealing system repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered to meet the exact specifications required for Dodge Durango vehicles. The kit contains a selection of O-rings and gaskets designed to replace worn or damaged seals within the HVAC system. Proper sealing is critical to prevent refrigerant leaks and maintain system efficiency. Using part number 1321242 ensures you receive components tailored to the Dodge Durango's A\/C system, avoiding compatibility issues common with universal kits.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates air infiltration that reduces cooling efficiency\u003c\/li\u003e\n\u003cli\u003eReplaces deteriorated or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper system pressure and performance\u003c\/li\u003e\n\u003cli\u003eSupports HVAC system repairs specific to Dodge Durango models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old seals are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify part number 1321242 matches your vehicle’s requirements\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris prior to assembly\u003c\/li\u003e\n\u003cli\u003eTighten fittings to manufacturer torque specifications to avoid leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Using part number 1321242 ensures compatibility and reliable sealing performance for Dodge Durango HVAC repairs.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803893629109,"sku":"BKNH-1321242","price":25.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321242_Fro.jpg?v=1774998866"},{"product_id":"global-parts-1321243-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321243 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321243 A\/C System O-Ring and Gasket Kit is designed specifically for select Dodge models, ensuring a precise fit and dependable sealing performance. This kit is tailored to maintain the integrity of your vehicle's HVAC system by preventing leaks and ensuring optimal air conditioning function.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Dodge D150, D250, D350, Ramcharger, W150, W250, and W350 models\u003c\/li\u003e\n\u003cli\u003eSpecific fitment ensures proper sealing and easy installation\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary O-rings and gaskets for A\/C system maintenance\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality and durability\u003c\/li\u003e\n\u003cli\u003ePart number 1321243 for accurate identification and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific Dodge trucks and SUVs, including the D150, D250, D350, Ramcharger, W150, W250, and W350. The kit contains a comprehensive set of seals designed to replace worn or damaged O-rings and gaskets within the air conditioning system. Using the correct part number 1321243 ensures compatibility and helps maintain the system’s pressure integrity, preventing refrigerant leaks and improving overall HVAC performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates air conditioning inefficiency caused by worn seals\u003c\/li\u003e\n\u003cli\u003eResolves issues related to compressor and condenser connections\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper system pressure and cooling performance\u003c\/li\u003e\n\u003cli\u003eAddresses leaks that cause environmental and performance concerns\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Dodge D150, D250, D350, Ramcharger, W150, W250, and W350 models before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings\u003c\/li\u003e\n\u003cli\u003eInspect the A\/C system for additional wear or damage during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321243 A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. This kit is designed to provide reliable sealing performance for specific Dodge models. While no explicit warranty details are provided, Global Parts products typically adhere to quality control processes to ensure customer satisfaction and part longevity.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803894939829,"sku":"BKNH-1321243","price":14.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321243_Fro.jpg?v=1774998866"},{"product_id":"global-parts-1321244-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321244 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eOverview of Global Parts A\/C System O-Ring and Gasket Kit\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321244 A\/C System O-Ring and Gasket Kit is designed specifically for select Dodge and Plymouth vans and trucks. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper air conditioning performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Dodge and Plymouth models including B150, B250, B350, B1500, B2500, B3500, PB150, PB250, PB350, Ram 1500 Van, Ram 2500 Van, and Ram 3500 Van\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321244 for precise identification and compatibility\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent refrigerant leaks and maintain system pressure\u003c\/li\u003e\n\u003cli\u003eCompatible with original equipment specifications for reliable performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific fitment on Dodge and Plymouth vehicles, including popular models such as the Ram 1500 Van and B3500. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to prevent refrigerant leaks, which can reduce cooling efficiency and cause system damage. Using part number 1321244 ensures you receive the correct components tailored to your vehicle's A\/C system design.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C compressor and condenser connections\u003c\/li\u003e\n\u003cli\u003ePreventing refrigerant loss due to degraded or brittle O-rings\u003c\/li\u003e\n\u003cli\u003eRestoring proper system pressure for efficient cooling\u003c\/li\u003e\n\u003cli\u003eEliminating moisture intrusion that can damage HVAC components\u003c\/li\u003e\n\u003cli\u003eReducing the risk of compressor failure caused by leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Dodge or Plymouth model using part number 1321244\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris before installing new seals\u003c\/li\u003e\n\u003cli\u003eTighten connections to manufacturer torque specifications to avoid leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Using part number 1321244 ensures you receive components designed for durability and reliable sealing performance in your Dodge or Plymouth vehicle.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803895005365,"sku":"BKNH-1321244","price":22.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321244_Fro.jpg?v=1774998866"},{"product_id":"global-parts-1321245-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321245 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Dodge and Plymouth\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321245 A\/C System O-Ring and Gasket Kit is designed specifically for select Dodge and Plymouth models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Dodge Caravan, Grand Caravan, Plymouth Grand Voyager, and Voyager models\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality O-rings and gaskets tailored for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321245 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain optimal HVAC system pressure and prevent refrigerant leaks\u003c\/li\u003e\n\u003cli\u003eDurable materials resistant to heat, pressure, and refrigerants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321245 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific fitment on Dodge Caravan, Grand Caravan, Plymouth Grand Voyager, and Voyager vehicles. The kit includes all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to maintaining system pressure and preventing refrigerant loss, which can lead to reduced cooling performance or system failure. Using part number 1321245 ensures you receive the correct components designed to meet OEM specifications for these models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks caused by degraded or damaged O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eRestores proper sealing in the A\/C system to maintain cooling efficiency\u003c\/li\u003e\n\u003cli\u003eEliminates moisture intrusion that can cause corrosion and system damage\u003c\/li\u003e\n\u003cli\u003eHelps avoid costly repairs related to A\/C system pressure loss\u003c\/li\u003e\n\u003cli\u003eSupports maintenance and rebuilds of HVAC components in specified Dodge and Plymouth vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Dodge Caravan, Grand Caravan, Plymouth Grand Voyager, or Voyager model year\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling A\/C components\u003c\/li\u003e\n\u003cli\u003eInspect all mating surfaces for damage or debris prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321245 A\/C System O-Ring and Gasket Kit to meet industry standards for durability and performance. Each component is tested to ensure proper fit and sealing capability. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Using this kit helps maintain the reliability of your Dodge or Plymouth HVAC system by providing OEM-quality sealing components.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803895431349,"sku":"BKNH-1321245","price":16.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321245_Fro.jpg?v=1774998867"},{"product_id":"global-parts-1321246-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321246 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler, Dodge, and Plymouth\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321246 A\/C System O-Ring and Gasket Kit is designed specifically for select Chrysler, Dodge, and Plymouth models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chrysler Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, and Voyager models\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality O-rings and gaskets tailored for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321246 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper sealing under HVAC system pressure and temperature variations\u003c\/li\u003e\n\u003cli\u003eGTIN 00844434039959 for accurate product tracking and verification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321246 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific fitment on Chrysler, Dodge, and Plymouth vehicles including the Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, and Voyager. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to prevent refrigerant leaks, which can reduce cooling efficiency and cause system damage. Using the correct part number 1321246 ensures that the components match OEM specifications for a precise fit and reliable performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling efficiency due to faulty seals\u003c\/li\u003e\n\u003cli\u003eAddresses compressor seal failures and gasket wear\u003c\/li\u003e\n\u003cli\u003eHelps maintain system pressure and prevents contamination ingress\u003c\/li\u003e\n\u003cli\u003eSupports HVAC system longevity by ensuring proper sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify vehicle compatibility with Chrysler Caravan, Grand Caravan, Grand Voyager, Town \u0026amp; Country, or Voyager before installation\u003c\/li\u003e\n\u003cli\u003eInspect all A\/C components for wear or damage prior to gasket and O-ring replacement\u003c\/li\u003e\n\u003cli\u003eUse appropriate lubricants recommended for A\/C O-rings to ensure proper sealing and prevent damage during installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling HVAC components\u003c\/li\u003e\n\u003cli\u003eTest the system for leaks after installation to confirm proper sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321246 A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Using this kit helps maintain the integrity of your vehicle’s HVAC system by providing OEM-quality sealing components designed for Chrysler, Dodge, and Plymouth models.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803896053941,"sku":"BKNH-1321246","price":15.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321246_Fro.jpg?v=1774998867"},{"product_id":"global-parts-1321247-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321247 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Dodge Neon\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321247 A\/C System O-Ring and Gasket Kit is designed specifically for Dodge Neon models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Dodge Neon vehicles\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321247 ensures correct replacement parts\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321247 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored to the specifications of Dodge Neon models, providing a precise fit that supports the vehicle’s HVAC system performance. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks and maintain system pressure, which directly affects cooling efficiency and system longevity.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to prevent refrigerant loss\u003c\/li\u003e\n\u003cli\u003eReplacing deteriorated or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eRestoring proper pressure and preventing moisture intrusion\u003c\/li\u003e\n\u003cli\u003eMaintaining HVAC system efficiency and performance\u003c\/li\u003e\n\u003cli\u003ePreventing contamination and corrosion within A\/C components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with Dodge Neon before installation\u003c\/li\u003e\n\u003cli\u003eClean all mating surfaces thoroughly to ensure proper sealing\u003c\/li\u003e\n\u003cli\u003eLubricate O-rings with appropriate refrigerant oil before installation\u003c\/li\u003e\n\u003cli\u003eReplace all components in the kit to avoid future leaks\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for fittings and connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321247 A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure customer confidence in product reliability. Using this kit helps maintain the integrity of your Dodge Neon’s HVAC system with parts designed for exact fit and function.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803896709301,"sku":"BKNH-1321247","price":14.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321247_Fro.jpg?v=1774998867"},{"product_id":"global-parts-1321248-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321248 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Chrysler, Dodge, and Plymouth\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321248 A\/C System O-Ring and Gasket Kit is designed specifically for select Chrysler, Dodge, and Plymouth models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Chrysler Acclaim, Dodge Daytona, Dynasty, LeBaron, Shadow, Spirit, and Plymouth Sundance\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality O-rings and gaskets tailored for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321248 ensures compatibility with designated vehicle models\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper sealing under HVAC system pressure and temperature variations\u003c\/li\u003e\n\u003cli\u003eGTIN 00844434039973 for easy identification and inventory management\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific fitment on Chrysler, Dodge, and Plymouth vehicles including the Acclaim, Daytona, Dynasty, LeBaron, Shadow, Spirit, and Sundance models. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks, maintain system pressure, and ensure efficient HVAC operation. Using part number 1321248 guarantees that the components match the original equipment specifications for these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks caused by degraded or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eEliminates A\/C system pressure loss leading to reduced cooling performance\u003c\/li\u003e\n\u003cli\u003eResolves issues related to moisture ingress and contamination in the HVAC system\u003c\/li\u003e\n\u003cli\u003eHelps avoid compressor damage due to improper sealing\u003c\/li\u003e\n\u003cli\u003eSupports restoration of factory-level A\/C system efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Chrysler, Dodge, or Plymouth model before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings to avoid leaks\u003c\/li\u003e\n\u003cli\u003eInspect all mating surfaces for damage or debris prior to sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. The kit undergoes quality control checks to ensure durability and proper sealing performance. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Using part number 1321248 ensures you receive components designed for reliable service in your Chrysler, Dodge, or Plymouth vehicle.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803898151093,"sku":"BKNH-1321248","price":15.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321248_Fro.jpg?v=1774998867"},{"product_id":"global-parts-1321249-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321249 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Ford, Lincoln, Mercury\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321249 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford, Lincoln, and Mercury vehicles. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford, Lincoln, and Mercury models including Aspire, Contour, Cougar, Crown Victoria, Grand Marquis, LTD, Marauder, Mystique, Probe, Thunderbird, and Town Car\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321249 ensures compatibility with designated vehicles\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality and fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered to meet the exact specifications required for proper sealing in the HVAC systems of specific Ford, Lincoln, and Mercury models. The kit includes a comprehensive set of O-rings and gaskets designed to replace worn or damaged seals that can cause refrigerant leaks and reduce system efficiency. By using part number 1321249, technicians and vehicle owners can be confident in the precise fit and function of these components, ensuring reliable performance and longevity of the air conditioning system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates compressor seal failures\u003c\/li\u003e\n\u003cli\u003eResolves low cooling performance due to seal degradation\u003c\/li\u003e\n\u003cli\u003eAddresses leaks at hose connections and fittings\u003c\/li\u003e\n\u003cli\u003eRestores proper system pressure and efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Global Parts 1321249 kit, ensure all old O-rings and gaskets are fully removed and mating surfaces are clean. Lubricate new O-rings with the appropriate refrigerant oil to prevent damage during assembly. Verify compatibility with your specific Ford, Lincoln, or Mercury model before installation. Proper torque specifications should be followed to avoid over-tightening and potential damage to the seals.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. While specific warranty details are not provided, Global Parts products typically undergo quality control processes to ensure reliable performance. Using part number 1321249 guarantees that you receive components designed for your vehicle’s HVAC system requirements.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803898642613,"sku":"BKNH-1321249","price":18.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321249_Fro_d331630f-4599-4133-b5bb-56008c5d698e.jpg?v=1774998868"},{"product_id":"global-parts-1321250-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321250 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Ford, Lincoln, Mercury\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321250 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford, Lincoln, and Mercury models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford Grand Marquis, Lincoln Town Car, and Mercury LTD models\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality O-rings and gaskets tailored for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321250 ensures compatibility with designated vehicles\u003c\/li\u003e\n\u003cli\u003eDurable materials designed to withstand HVAC system pressures and temperatures\u003c\/li\u003e\n\u003cli\u003eHelps maintain optimal air conditioning performance by preventing refrigerant leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific fitment on Ford Grand Marquis, Lincoln Town Car, and Mercury LTD vehicles. The kit includes all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to prevent refrigerant leaks, which can reduce cooling efficiency and potentially damage system components. Using part number 1321250 ensures you receive the correct parts designed to meet the original equipment specifications for these models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling performance due to faulty seals\u003c\/li\u003e\n\u003cli\u003eAddresses compressor seal failures and gasket wear\u003c\/li\u003e\n\u003cli\u003eHelps avoid moisture intrusion that can cause system corrosion\u003c\/li\u003e\n\u003cli\u003eSupports maintenance and repair of HVAC system components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Ford Grand Marquis, Lincoln Town Car, or Mercury LTD before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling components\u003c\/li\u003e\n\u003cli\u003eInspect surrounding HVAC components for wear or damage during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. The kit is designed to provide reliable sealing performance under typical operating conditions for the specified Ford, Lincoln, and Mercury models. While specific warranty details are not provided, Global Parts products generally adhere to quality control processes to ensure consistent part integrity and fit.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803898937525,"sku":"BKNH-1321250","price":12.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321250_Fro.jpg?v=1774998868"},{"product_id":"global-parts-1321251-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321251 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Ford and Mercury Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321251 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford and Mercury models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford Bronco II, Capri, Cougar, Escort, Lynx, Mustang, Ranger, and Tracer\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321251 ensures compatibility with designated models\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality and durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321251 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored to fit specific Ford and Mercury vehicles, including the Bronco II, Capri, Cougar, Escort, Lynx, Mustang, Ranger, and Tracer. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks and maintain system pressure, which directly affects cooling performance. Using the correct part number 1321251 ensures that each component matches OEM specifications for a precise fit and reliable operation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling efficiency due to faulty seals\u003c\/li\u003e\n\u003cli\u003eResolves issues related to compressor or condenser leaks\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper system pressure and performance\u003c\/li\u003e\n\u003cli\u003eReplaces deteriorated or brittle O-rings and gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old seals and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Ford or Mercury model using part number 1321251\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris to ensure a proper seal\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321251 A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. Each kit undergoes quality control to ensure all components meet specifications for reliable sealing performance. Warranty coverage details should be confirmed with the distributor or retailer, as terms may vary.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803899396277,"sku":"BKNH-1321251","price":17.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321251_Fro.jpg?v=1774998868"},{"product_id":"global-parts-1321252-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321252 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Ford and Jaguar\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321252 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford and Jaguar models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford Escort, Focus, and GT models\u003c\/li\u003e\n\u003cli\u003eCompatible with Jaguar XJ6, XJ8, XJ12, XJRS, and XJS models\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality O-rings and gaskets tailored for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321252 ensures exact replacement parts\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain optimal HVAC system performance and prevent refrigerant leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific fitment, matching the sealing requirements of Ford and Jaguar vehicles listed. The kit includes all necessary O-rings and gaskets to replace worn or damaged seals within the air conditioning system. Proper sealing is critical to prevent refrigerant loss and maintain system pressure, which directly impacts cooling efficiency. Using part number 1321252 guarantees compatibility with the HVAC components of Ford Escort, Focus, GT, and Jaguar XJ6, XJ8, XJ12, XJRS, and XJS models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks caused by degraded or cracked O-rings\u003c\/li\u003e\n\u003cli\u003eEliminates air intrusion that can reduce A\/C system efficiency\u003c\/li\u003e\n\u003cli\u003eResolves issues related to inconsistent cooling performance\u003c\/li\u003e\n\u003cli\u003eAddresses moisture contamination risks within the HVAC system\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper system pressure and prolong compressor life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify part number 1321252 matches your vehicle’s specific HVAC components\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris prior to assembly\u003c\/li\u003e\n\u003cli\u003eTighten fittings to manufacturer torque specifications to avoid leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. The kit undergoes quality control checks to ensure durability and proper sealing performance. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to provide confidence in product reliability.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803899691189,"sku":"BKNH-1321252","price":14.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321252_Fro.jpg?v=1774998869"},{"product_id":"global-parts-1321253-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321253 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Ford and Jaguar Models\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321253 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford, Jaguar, Lincoln, and Mercury vehicles. This kit provides the necessary sealing components to maintain the integrity of your vehicle’s HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford, Jaguar, Lincoln, and Mercury models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003eCompatible with models such as Continental, LS, Mark VI, Mark VII, Mark VIII, S-Type, Sable, Taurus, Tempo, Topaz, Vanden Plas, Versailles, XJ6, and XKR\u003c\/li\u003e\n\u003cli\u003ePart number 1321253 ensures precise replacement parts\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality and fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321253 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered for specific vehicle applications, including Ford Taurus, Lincoln Continental, Jaguar XJ6, and Mercury Sable among others. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks and maintain system pressure, which directly impacts cooling performance and system longevity. Using the correct part number 1321253 ensures compatibility and reduces the risk of installation issues.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Issues Addressed by This Kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to prevent refrigerant loss\u003c\/li\u003e\n\u003cli\u003eReplacing deteriorated or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eRestoring proper pressure and efficiency in the HVAC system\u003c\/li\u003e\n\u003cli\u003ePreventing moisture and contaminants from entering the A\/C system\u003c\/li\u003e\n\u003cli\u003eMaintaining optimal cooling performance in Ford, Jaguar, Lincoln, and Mercury vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific vehicle model and year before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings and connections\u003c\/li\u003e\n\u003cli\u003eInspect the A\/C system for additional wear or damage during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321253 A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. Each component is tested for durability and sealing performance to ensure reliable operation within the HVAC system. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to provide confidence in product quality.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803901460661,"sku":"BKNH-1321253","price":17.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321253_Fro.jpg?v=1774998869"},{"product_id":"global-parts-1321254-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321254 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Ford, Mercury, and Nissan\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321254 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford, Mercury, and Nissan models. This kit provides the necessary sealing components to maintain the integrity of your vehicle’s HVAC system and prevent refrigerant leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford Freestar, Mercury Villager, Nissan Quest, and Ford Windstar\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321254 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain proper refrigerant pressure and prevent leaks\u003c\/li\u003e\n\u003cli\u003eDurable materials engineered for automotive HVAC applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321254 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific vehicle models including the Ford Freestar, Mercury Villager, Nissan Quest, and Ford Windstar. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to maintaining refrigerant pressure and preventing leaks that can reduce cooling efficiency or cause system failure. The part number 1321254 corresponds to a kit engineered to meet the exact specifications required by these vehicles, ensuring a precise fit and reliable performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to restore proper refrigerant levels\u003c\/li\u003e\n\u003cli\u003eReplacing deteriorated or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003ePreventing moisture and contaminants from entering the HVAC system\u003c\/li\u003e\n\u003cli\u003eMaintaining system pressure for optimal cooling performance\u003c\/li\u003e\n\u003cli\u003eReducing the risk of compressor damage due to refrigerant loss\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Ford Freestar, Mercury Villager, Nissan Quest, or Ford Windstar before installation\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris to ensure a proper seal\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321254 A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. While specific warranty details may vary, Global Parts typically offers coverage against defects in materials and workmanship. Using this kit helps maintain the integrity of your vehicle’s HVAC system and supports long-term reliability.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803901657269,"sku":"BKNH-1321254","price":17.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321254_Fro.jpg?v=1774998869"},{"product_id":"global-parts-1321255-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321255 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Ford and Lincoln Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321255 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford, Lincoln, Mazda, and Mercury models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford, Lincoln, Mazda, and Mercury models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321255 ensures compatibility and easy identification\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain HVAC system pressure and prevent refrigerant leaks\u003c\/li\u003e\n\u003cli\u003eDurable materials engineered for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321255 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific vehicle applications, including Ford F-150, F-250, F-350, Expedition, Bronco, and Lincoln Navigator, among others. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to maintaining refrigerant pressure and preventing leaks that can reduce cooling efficiency or cause system failure. The part number 1321255 corresponds to a kit engineered to meet OEM specifications for the listed models, ensuring a precise fit and reliable performance.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFord F-150, F-150 Heritage, F-250, F-250 HD, F-250 Super Duty, F-350, F-350 Super Duty\u003c\/li\u003e\n\u003cli\u003eFord Expedition, Excursion, Bronco, Ranger, Escape, Tribute\u003c\/li\u003e\n\u003cli\u003eLincoln Navigator, Blackwood\u003c\/li\u003e\n\u003cli\u003eMazda Mariner\u003c\/li\u003e\n\u003cli\u003eMercury Mariner\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by This O-Ring and Gasket Kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRefrigerant leaks causing reduced A\/C cooling performance\u003c\/li\u003e\n\u003cli\u003eWorn or cracked O-rings leading to system pressure loss\u003c\/li\u003e\n\u003cli\u003eHVAC system contamination from failed seals\u003c\/li\u003e\n\u003cli\u003eNoise or vibration caused by improper sealing\u003c\/li\u003e\n\u003cli\u003ePreventative maintenance to avoid costly A\/C repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Global Parts 1321255 kit, ensure all old O-rings and gaskets are fully removed and surfaces are clean. Lubricate new O-rings with the appropriate refrigerant oil to prevent damage during assembly. Verify compatibility with your specific vehicle model before installation. Proper torque specifications should be followed to avoid overtightening, which can damage seals. It is recommended to perform a leak test after installation to confirm system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. The kit is engineered to OEM specifications for the listed Ford, Lincoln, Mazda, and Mercury models. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Refer to the product packaging or manufacturer documentation for exact warranty terms.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803902116021,"sku":"BKNH-1321255","price":17.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321255_Fro_dd709ae8-1b50-4dfc-a313-aaaef48900ec.jpg?v=1774998870"},{"product_id":"global-parts-1321256-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321256 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eOverview of Global Parts A\/C System O-Ring and Gasket Kit\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321256 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford, Mazda, and Mercury vehicles. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring reliable air conditioning performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford, Mazda, and Mercury models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321256 for precise identification\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Ranger, Explorer, Escape, and more\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent refrigerant leaks and maintain system pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321256 kit contains a comprehensive set of O-rings and gaskets tailored for the HVAC systems of specific Ford, Mazda, and Mercury vehicles. This kit is engineered to replace worn or damaged sealing components in the air conditioning system, helping to prevent refrigerant leaks and maintain optimal system pressure. It is compatible with models including the Ford B2300, B2500, B3000, B4000, Escape, Explorer, Explorer Sport, Explorer Sport Trac, Mariner, Mountaineer, Navajo, and Ranger. The specific fitment ensures that each gasket and O-ring matches the original equipment specifications, facilitating a proper seal and reliable performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to prevent refrigerant loss\u003c\/li\u003e\n\u003cli\u003eReplacing deteriorated or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eRestoring proper pressure and efficiency in the HVAC system\u003c\/li\u003e\n\u003cli\u003eEliminating moisture intrusion that can damage A\/C components\u003c\/li\u003e\n\u003cli\u003eEnsuring a tight seal during A\/C system repairs or maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your vehicle’s make and model before installation\u003c\/li\u003e\n\u003cli\u003eClean all mating surfaces thoroughly to ensure a proper seal\u003c\/li\u003e\n\u003cli\u003eLubricate O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eReplace all old sealing components to avoid future leaks\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when tightening fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. The kit undergoes quality control inspections to ensure durability and reliability in automotive HVAC applications. While specific warranty details are not provided, Global Parts products typically come with a limited warranty against defects in materials and workmanship. Consult the product packaging or Global Parts documentation for exact warranty terms.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803902738613,"sku":"BKNH-1321256","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321256_Fro_fc0d7b38-aa95-4a86-85f9-8268d7f719b9.jpg?v=1774998870"},{"product_id":"global-parts-1321257-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321257 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Ford Aerostar\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321257 A\/C System O-Ring and Gasket Kit is designed specifically for the Ford Aerostar. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring proper function and preventing leaks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford Aerostar models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321257 for easy identification\u003c\/li\u003e\n\u003cli\u003eCompatible with HVAC sealing system repairs\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Global Parts 1321257 Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored to fit the Ford Aerostar, providing a precise match for the vehicle’s HVAC sealing requirements. The kit includes a selection of O-rings and gaskets engineered to replace worn or damaged components within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks and maintain system pressure, which directly impacts cooling performance. The specific fitment attribute ensures that each part in the kit corresponds exactly to the Ford Aerostar’s specifications, reducing installation time and improving reliability.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to prevent refrigerant loss\u003c\/li\u003e\n\u003cli\u003eReplacing deteriorated or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eRestoring proper pressure and efficiency in the HVAC system\u003c\/li\u003e\n\u003cli\u003eEliminating moisture intrusion that can cause corrosion\u003c\/li\u003e\n\u003cli\u003eSupporting routine maintenance and HVAC system rebuilds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old seals and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with the Ford Aerostar model year before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings\u003c\/li\u003e\n\u003cli\u003eInspect the A\/C system for additional wear or damage during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321257 A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. Each component undergoes quality checks to ensure durability and proper sealing performance. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to provide confidence in the product’s reliability when installed in the Ford Aerostar HVAC system.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803902967989,"sku":"BKNH-1321257","price":16.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321257_Fro.jpg?v=1774998870"},{"product_id":"global-parts-1321258-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321258 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eOverview of Global Parts A\/C System O-Ring and Gasket Kit\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321258 A\/C System O-Ring and Gasket Kit is designed specifically for select Ford, Lincoln, and Mercury vehicles. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system, ensuring reliable air conditioning performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Ford, Lincoln, and Mercury models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321258 for precise identification\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Econoline, F-Series, and other models\u003c\/li\u003e\n\u003cli\u003eEngineered to meet OEM specifications for durability and fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321258 kit contains a comprehensive set of O-rings and gaskets tailored for the A\/C systems of specific Ford, Lincoln, and Mercury vehicles. This kit is not universal; it is designed for exact fitment on models such as the Ford F-150, F-250 Super Duty, E-150 Econoline, Lincoln Aviator, and Mercury Montego, among others. Using this kit helps maintain proper sealing in the HVAC system, preventing refrigerant leaks and ensuring optimal system pressure. The components are manufactured to meet or exceed OEM standards, providing reliable sealing performance and long service life.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFord F-150, F-250 Super Duty, F-350 Super Duty\u003c\/li\u003e\n\u003cli\u003eFord E-100, E-150, E-250, E-350 Econoline and Club Wagon variants\u003c\/li\u003e\n\u003cli\u003eLincoln Aviator\u003c\/li\u003e\n\u003cli\u003eMercury Montego, Ranger, Freestyle, and EcoSport\u003c\/li\u003e\n\u003cli\u003eFord Freestar and other listed models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by This Kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRefrigerant leaks due to worn or damaged O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003eLoss of A\/C system pressure affecting cooling efficiency\u003c\/li\u003e\n\u003cli\u003eHVAC system contamination from compromised seals\u003c\/li\u003e\n\u003cli\u003eNoise or vibration caused by improper sealing\u003c\/li\u003e\n\u003cli\u003ePreventative maintenance to avoid costly A\/C repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific vehicle make and model before installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings\u003c\/li\u003e\n\u003cli\u003eInspect A\/C system components for wear or damage during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321258 A\/C System O-Ring and Gasket Kit to meet OEM quality standards. Each component undergoes rigorous quality control to ensure proper fit and function. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Consult product documentation or your supplier for exact warranty terms.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803903918261,"sku":"BKNH-1321258","price":21.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321258_Fro_09e0ef59-42f9-4aa4-8773-675c11600621.jpg?v=1774998870"},{"product_id":"global-parts-1321259-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321259 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Saturn Models\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321259 A\/C System O-Ring and Gasket Kit is designed specifically for Saturn vehicles, including SC, SC1, SC2, SL, SL1, SL2, SW1, and SW2 models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system.\u003c\/p\u003e\u003ch2\u003eKey Features of the Global Parts 1321259 Kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Saturn SC, SC1, SC2, SL, SL1, SL2, SW1, and SW2 models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003eEnsures proper sealing to prevent refrigerant leaks\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality\u003c\/li\u003e\n\u003cli\u003ePart number 1321259 for accurate identification and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the A\/C System O-Ring and Gasket Kit\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered to meet the specific sealing requirements of Saturn vehicles. The kit contains a selection of O-rings and gaskets tailored to the HVAC system components, ensuring a precise fit and reliable sealing performance. Using the correct sealing components helps maintain system pressure and prevents refrigerant loss, which is critical for efficient air conditioning operation. The part number 1321259 corresponds to this exact kit, making it easier to source the right parts for your Saturn SC, SL, or SW series vehicle.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged A\/C system O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003ePrevention of refrigerant leaks in Saturn SC and SL models\u003c\/li\u003e\n\u003cli\u003eRestoring proper sealing after HVAC system repairs or maintenance\u003c\/li\u003e\n\u003cli\u003eEliminating A\/C system pressure loss due to seal degradation\u003c\/li\u003e\n\u003cli\u003eEnsuring optimal performance of the vehicle’s air conditioning system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify compatibility with your specific Saturn model before installation\u003c\/li\u003e\n\u003cli\u003eClean all mating surfaces thoroughly to ensure proper sealing\u003c\/li\u003e\n\u003cli\u003eLubricate O-rings with appropriate refrigerant oil to prevent damage during installation\u003c\/li\u003e\n\u003cli\u003eReplace all seals in the kit to maintain system integrity\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321259 A\/C System O-Ring and Gasket Kit to meet industry standards for durability and fitment. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure customer confidence in the product’s reliability. Using this kit helps maintain the HVAC system’s performance and longevity in Saturn SC, SL, and SW series vehicles.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803904409781,"sku":"BKNH-1321259","price":12.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321259_Fro.jpg?v=1774998871"},{"product_id":"global-parts-1321260-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321260 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Saturn Models\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321260 A\/C System O-Ring and Gasket Kit is designed specifically for Saturn vehicles, including Astra, Aura, Ion, Outlook, Sky, and Vue models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fit for Saturn Astra, Aura, Ion, Outlook, Sky, and Vue\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321260 ensures correct replacement parts\u003c\/li\u003e\n\u003cli\u003eCompatible with HVAC sealing system repairs\u003c\/li\u003e\n\u003cli\u003eDurable materials designed for automotive A\/C applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321260 A\/C System O-Ring and Gasket Kit is engineered to meet the exact specifications required for Saturn HVAC systems. This specific fit kit contains all necessary sealing components to prevent refrigerant leaks and maintain optimal air conditioning performance. Using the correct O-rings and gaskets is critical for preserving system pressure and preventing contamination. This kit is tailored for Saturn Astra, Aura, Ion, Outlook, Sky, and Vue models, ensuring compatibility and ease of installation.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to prevent refrigerant loss\u003c\/li\u003e\n\u003cli\u003eReplacing worn or damaged O-rings and gaskets during HVAC repairs\u003c\/li\u003e\n\u003cli\u003eRestoring proper pressure and efficiency in the air conditioning system\u003c\/li\u003e\n\u003cli\u003ePreventing moisture and debris ingress into the A\/C components\u003c\/li\u003e\n\u003cli\u003eMaintaining system integrity after component replacement or service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Global Parts 1321260 kit, ensure all old seals are fully removed and mating surfaces are clean. Lubricate O-rings with the appropriate refrigerant oil to avoid damage during assembly. Verify that each gasket and O-ring matches the original part in size and shape. Proper installation will help maintain system pressure and prevent leaks. Follow vehicle-specific service manuals for torque specifications and assembly procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts provides this A\/C System O-Ring and Gasket Kit with quality materials designed for durability and reliable sealing performance. The kit is manufactured to meet OEM standards for Saturn vehicles. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to ensure customer confidence in the product's reliability.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803904737461,"sku":"BKNH-1321260","price":22.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321260_Fro.jpg?v=1774998871"},{"product_id":"global-parts-1321261-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321261 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Saturn Models\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321261 A\/C System O-Ring and Gasket Kit is designed specifically for Saturn vehicles, including L100, L200, L300, LS, LS1, LS2, LW1, LW2, LW200, and LW300 models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Saturn L100, L200, L300, LS, LS1, LS2, LW1, LW2, LW200, and LW300\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321261 ensures correct replacement parts\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent refrigerant leaks and maintain system pressure\u003c\/li\u003e\n\u003cli\u003eCompatible with original equipment specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is engineered to meet the exact specifications required for Saturn models listed in the fitment. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the air conditioning system. Proper sealing is critical to prevent refrigerant leaks, which can reduce cooling efficiency and potentially damage the A\/C compressor. Using part number 1321261 ensures that you receive the correct components tailored for your Saturn vehicle’s HVAC system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSealing leaks in the A\/C system to restore proper refrigerant pressure\u003c\/li\u003e\n\u003cli\u003eReplacing deteriorated or cracked O-rings and gaskets\u003c\/li\u003e\n\u003cli\u003ePreventing moisture and contaminants from entering the A\/C system\u003c\/li\u003e\n\u003cli\u003eMaintaining optimal cooling performance in Saturn L100, L200, L300, LS, LS1, LS2, LW1, LW2, LW200, and LW300 models\u003c\/li\u003e\n\u003cli\u003eSupporting system longevity by ensuring airtight connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Saturn model using part number 1321261\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris before installing new seals\u003c\/li\u003e\n\u003cli\u003eTighten fittings to manufacturer torque specifications to avoid leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures this A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects. Using part number 1321261 guarantees that you are installing components designed for the precise requirements of Saturn L100, L200, L300, LS, LS1, LS2, LW1, LW2, LW200, and LW300 models, supporting reliable HVAC system performance.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803905163445,"sku":"BKNH-1321261","price":19.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321261_Fro.jpg?v=1774998871"},{"product_id":"global-parts-1321262-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321262 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eOverview of Global Parts A\/C System O-Ring and Gasket Kit\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321262 A\/C System O-Ring and Gasket Kit is designed specifically for select Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Buick Alero, Cadillac Seville, Chevrolet Corvette, Oldsmobile Cutlass, and Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321262 ensures compatibility with designated models\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent refrigerant leaks and maintain system pressure\u003c\/li\u003e\n\u003cli\u003eManufactured by Global Parts for consistent quality and fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts (part number 1321262) is engineered for specific vehicle applications, including Buick Alero and Century, Cadillac Seville and Aurora, Chevrolet Corvette and Lumina, Oldsmobile Cutlass Supreme and Intrigue, and Pontiac Grand Prix and Grand Prix. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system, ensuring a tight seal and preventing refrigerant leaks. Proper sealing is critical for maintaining optimal air conditioning performance and system longevity.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in A\/C lines and connections\u003c\/li\u003e\n\u003cli\u003eEliminates loss of system pressure due to worn seals\u003c\/li\u003e\n\u003cli\u003eReduces moisture intrusion that can cause system corrosion\u003c\/li\u003e\n\u003cli\u003eHelps restore proper A\/C system function and cooling efficiency\u003c\/li\u003e\n\u003cli\u003eAddresses common HVAC sealing failures in specified Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage during assembly\u003c\/li\u003e\n\u003cli\u003eVerify part number 1321262 matches your vehicle’s specific model and year\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris before installing new seals\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for all fittings to avoid leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts manufactures the 1321262 A\/C System O-Ring and Gasket Kit to meet OEM standards for fit and function. This kit undergoes quality control inspections to ensure reliable sealing performance. While specific warranty details may vary, Global Parts typically offers coverage against manufacturing defects to support product reliability and customer confidence.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803905622197,"sku":"BKNH-1321262","price":20.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321262_Fro.jpg?v=1774998872"},{"product_id":"global-parts-1321263-a-c-system-o-ring-and-gasket-kit","title":"Global Parts 1321263 A\/C System O-Ring and Gasket Kit","description":"\u003ch2\u003eReliable A\/C System O-Ring and Gasket Kit for Select GM Vehicles\u003c\/h2\u003e\u003cp\u003eThe Global Parts 1321263 A\/C System O-Ring and Gasket Kit is designed specifically for various Buick, Chevrolet, Oldsmobile, and Pontiac models. This kit provides the necessary sealing components to maintain the integrity of your vehicle's HVAC system and ensure efficient air conditioning performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecific fitment for Buick, Chevrolet, Oldsmobile, and Pontiac models\u003c\/li\u003e\n\u003cli\u003eIncludes essential O-rings and gaskets for A\/C system sealing\u003c\/li\u003e\n\u003cli\u003ePart number 1321263 ensures correct replacement components\u003c\/li\u003e\n\u003cli\u003eCompatible with models such as Camaro, Caprice, Cavalier, and Corvette\u003c\/li\u003e\n\u003cli\u003eDesigned to prevent refrigerant leaks and maintain system pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis A\/C System O-Ring and Gasket Kit from Global Parts is tailored for specific General Motors vehicles, including popular models like the Chevrolet Camaro, Buick Century, Pontiac Firebird, and Oldsmobile Cutlass Supreme. The kit contains all necessary sealing components to replace worn or damaged O-rings and gaskets within the HVAC system. Proper sealing is critical to prevent refrigerant leaks, which can reduce cooling efficiency and potentially damage the A\/C compressor. Using part number 1321263 ensures compatibility and reliable performance for your vehicle's air conditioning system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents refrigerant leaks in the A\/C system\u003c\/li\u003e\n\u003cli\u003eEliminates loss of cooling performance due to worn seals\u003c\/li\u003e\n\u003cli\u003eStops moisture intrusion that can cause system corrosion\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper system pressure and efficiency\u003c\/li\u003e\n\u003cli\u003eAddresses leaks around compressor, condenser, and evaporator connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all old O-rings and gaskets are fully removed before installation\u003c\/li\u003e\n\u003cli\u003eLubricate new O-rings with appropriate refrigerant oil to prevent damage\u003c\/li\u003e\n\u003cli\u003eVerify exact model fitment using the part number 1321263 before installation\u003c\/li\u003e\n\u003cli\u003eInspect mating surfaces for damage or debris to ensure proper sealing\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when reassembling components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eGlobal Parts provides this A\/C System O-Ring and Gasket Kit with a focus on precise fitment and material durability. While specific warranty details may vary, Global Parts products typically come with a limited warranty against defects in materials and workmanship. Using the correct part number 1321263 helps ensure you receive components that meet OEM standards for Buick, Chevrolet, Oldsmobile, and Pontiac vehicles.\u003c\/p\u003e","brand":"Global Parts","offers":[{"title":"Default Title","offer_id":43803907686581,"sku":"BKNH-1321263","price":11.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GP_1321263_Fro.jpg?v=1774998872"}],"url":"https:\/\/www.partcatalog.com\/collections\/gaskets-and-sealing-systems-13.oembed","provider":"PartCatalog","version":"1.0","type":"link"}