{"title":"Tire and Wheel \u003e Hardware, Fasteners and Fittings","description":"\u003cp\u003eWheel hardware keeps your wheels centered, seated, and secured to the hub — and when any piece fails, the consequences range from an embarrassing wobble to a wheel separating at speed. This collection covers lug nuts, lug studs, lug bolts, wheel caps, rim nuts, and ancillary hardware including TPMS sensor clips and wheel cover clips across 736 products. Lug studs are the most common failure point: they strip or shear from over-torquing, impact wrench abuse, or corrosion, and a single damaged stud should prompt inspection of the rest. Lug nuts and bolts don't wear on a mileage schedule but should be replaced if threads are compromised, seats are rounded, or you're changing wheel type — open-ended nuts for aftermarket wheels, closed\/acorn for OEM applications. Always match thread pitch and seat type (conical, ball, flat) to your wheel. OEM-spec hardware is the safest default; aftermarket is fine when spec-matched correctly.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel feels loose or vehicle pulls during highway driving.\u003c\/strong\u003e Even one stripped or missing lug nut reduces clamping force across the wheel; if you feel vibration or pulling that wasn't there before, check torque and inspect studs and nuts for thread damage before driving further.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLug nut won't torque down or spins freely.\u003c\/strong\u003e This usually means the stud threads are stripped. A stud that won't hold torque has no holding power — replace it before reinstalling the wheel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible rust, corrosion, or cracking on lug nuts or studs.\u003c\/strong\u003e Surface rust is cosmetic, but deep pitting, thread corrosion, or cracking at the base of a stud are structural issues that warrant immediate replacement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLug nut seat is rounded or won't accept a socket cleanly.\u003c\/strong\u003e Over-torqued or impacted lug nuts develop a rounded hex profile that makes removal difficult and torque readings unreliable — replace them rather than risk a stuck wheel at the next tire change.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel cap is cracked, missing, or no longer clips securely.\u003c\/strong\u003e Caps are cosmetic but protect center bore threads and hub components from road debris and moisture. Damaged clips or retaining hardware let caps rattle and fall off.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTPMS sensor reading is erratic after a tire rotation or mount.\u003c\/strong\u003e A damaged or missing TPMS sensor clip can cause the sensor to shift position in the rim, leading to false pressure readings or a persistent TPMS warning light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow often should lug nuts and studs be replaced?\u003c\/strong\u003e There's no fixed mileage interval — replace them when you find thread damage, corrosion, or improper fit. That said, it's good practice to inspect studs and nuts every time tires are rotated (typically every 5,000–7,500 miles) and replace the full set if multiple fasteners show wear.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eDo I need OEM lug nuts, or will aftermarket work?\u003c\/strong\u003e Aftermarket lug nuts are fine as long as thread pitch, shank length, and seat type match your wheel. The critical variable is the seat: conical (tapered), ball (spherical), and flat seats are not interchangeable. Mismatched seats cause uneven clamping and can crack aluminum wheels over time. When in doubt, OEM eliminates guesswork.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat does it cost to replace a lug stud, and can I do it myself?\u003c\/strong\u003e Individual lug studs typically run $3–$15 each; a full set of five per hub is usually $15–$60 depending on vehicle and brand. Replacement is DIY-friendly on most vehicles — it requires removing the wheel and brake rotor or drum, pressing or hammering the old stud out, and pulling the new one through with lug nuts. Budget 30–60 minutes per hub.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"professional-parts-sweden-61433068-wheel-lug-nut","title":"Professional Parts Sweden 61433068 Wheel Lug Nut","description":"\u003ch2\u003eProfessional Parts Sweden Wheel Lug Nut Overview\u003c\/h2\u003e\u003cp\u003eThe Professional Parts Sweden wheel lug nut, part number 61433068, is designed specifically for Volvo 740 and 760 models. Engineered to meet precise specifications, this lug nut ensures secure wheel attachment and reliable performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread Size: M12 x 1.5 for accurate fitment\u003c\/li\u003e\n\u003cli\u003eLength: 14 mm for proper engagement\u003c\/li\u003e\n\u003cli\u003eSpanner Size: 19 mm for easy installation and removal\u003c\/li\u003e\n\u003cli\u003eCompatible with Volvo 740 and 760 models\u003c\/li\u003e\n\u003cli\u003eDurable construction for consistent torque retention\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis wheel lug nut features a thread size of M12 x 1.5, which matches the factory specifications for Volvo 740 and 760 wheels. The 14 mm length provides sufficient thread engagement to maintain wheel security without risking damage to the wheel studs. The 19 mm spanner size allows for standard wrench compatibility, facilitating straightforward installation and removal during maintenance or tire changes.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eCompatible with Volvo 740 and 760 models, this lug nut is intended for use on original equipment wheels or aftermarket wheels designed to the same specifications. It is suitable for addressing issues such as loose or damaged lug nuts, ensuring proper wheel fitment, and maintaining safe driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or stripped lug nuts on Volvo 740 and 760\u003c\/li\u003e\n\u003cli\u003eSecures wheels to prevent loosening during operation\u003c\/li\u003e\n\u003cli\u003eRestores proper torque retention after wheel service\u003c\/li\u003e\n\u003cli\u003ePrevents wheel vibration caused by improper lug nut fit\u003c\/li\u003e\n\u003cli\u003eSupports safe and stable wheel mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Professional Parts Sweden wheel lug nut 61433068, ensure the threads on both the lug nut and wheel stud are clean and free of debris. Use a 19 mm spanner or socket to tighten the lug nuts to the manufacturer’s recommended torque specification. Avoid over-tightening to prevent damage to the wheel studs or lug nuts. Regularly inspect lug nuts for signs of wear or corrosion, especially on Volvo 740 and 760 vehicles used in harsh conditions.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eProfessional Parts Sweden manufactures this wheel lug nut to meet stringent quality standards, ensuring durability and reliable performance. While specific warranty details are not provided, the product is designed to comply with OEM specifications for Volvo 740 and 760 models, supporting long-term use under normal driving conditions.\u003c\/p\u003e","brand":"Professional Parts Sweden","offers":[{"title":"Default Title","offer_id":43589379719349,"sku":"FNJW-61433068","price":12.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PS_61433068_Fro.jpg?v=1774972361"},{"product_id":"professional-parts-sweden-61436651-wheel-lug-bolt","title":"Professional Parts Sweden 61436651 Wheel Lug Bolt","description":"\u003ch2\u003eProfessional Wheel Lug Bolt for Volvo 850, C70, S70, and V70\u003c\/h2\u003e\u003cp\u003eThe Professional Parts Sweden wheel lug bolt 61436651 is designed specifically for select Volvo models including the 850, C70, S70, and V70. Engineered to meet precise specifications, this lug bolt ensures secure wheel attachment and reliable performance.\u003c\/p\u003e\u003ch2\u003eKey Features of the Wheel Lug Bolt 61436651\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLength: 56 mm for optimal fit and strength\u003c\/li\u003e\n\u003cli\u003eSpanner size: 19 mm for standard wrench compatibility\u003c\/li\u003e\n\u003cli\u003eThread length: 27 mm to ensure proper engagement\u003c\/li\u003e\n\u003cli\u003eThread size: M12 x 1.75, matching Volvo factory specifications\u003c\/li\u003e\n\u003cli\u003eCompatible with Volvo 850, C70, S70, and V70 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description and Specifications\u003c\/h2\u003e\u003cp\u003eThis wheel lug bolt from Professional Parts Sweden is manufactured to exacting standards to fit Volvo vehicles requiring an M12 x 1.75 thread size. The 56 mm overall length and 27 mm thread length provide the necessary depth and strength to securely fasten wheels. The 19 mm spanner size allows for easy installation and removal using common tools. This part number 61436651 is engineered to maintain wheel integrity and safety on Volvo 850, C70, S70, and V70 models, ensuring consistent performance under normal driving conditions.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug bolts on Volvo 850, C70, S70, and V70\u003c\/li\u003e\n\u003cli\u003eResolving issues with loose or improperly fitting lug bolts\u003c\/li\u003e\n\u003cli\u003eEnsuring correct thread engagement to prevent wheel vibration\u003c\/li\u003e\n\u003cli\u003eMaintaining factory specifications for wheel mounting hardware\u003c\/li\u003e\n\u003cli\u003eSupporting safe wheel installation after tire or brake service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUse a 19 mm spanner or socket for proper torque application\u003c\/li\u003e\n\u003cli\u003eEnsure threads are clean and free of debris before installation\u003c\/li\u003e\n\u003cli\u003eTighten lug bolts in a star pattern to evenly distribute pressure\u003c\/li\u003e\n\u003cli\u003eFollow vehicle manufacturer torque specifications to avoid over-tightening\u003c\/li\u003e\n\u003cli\u003eInspect lug bolts regularly for signs of wear or damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eProfessional Parts Sweden manufactures this wheel lug bolt to meet OEM standards for fit and durability. While specific warranty details are not provided, the part is produced under strict quality controls to ensure reliable performance on Volvo 850, C70, S70, and V70 vehicles. Using the correct part number 61436651 helps maintain vehicle safety and wheel integrity.\u003c\/p\u003e","brand":"Professional Parts Sweden","offers":[{"title":"Default Title","offer_id":43589439881397,"sku":"FNJW-61436651","price":13.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PS_61436651_Fro.jpg?v=1774972365"},{"product_id":"professional-parts-sweden-61436899-wheel-lug-bolt","title":"Professional Parts Sweden 61436899 Wheel Lug Bolt","description":"\u003ch2\u003eProfessional Wheel Lug Bolt for Volvo 850, C70, S70, and V70\u003c\/h2\u003e\u003cp\u003eThe Professional Parts Sweden wheel lug bolt 61436899 is designed specifically for Volvo models including the 850, C70, S70, and V70. Engineered to meet precise specifications, this lug bolt ensures secure wheel attachment and reliable performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLength: 67 mm for optimal fit\u003c\/li\u003e\n\u003cli\u003eSpanner size: 19 mm for standard wrench compatibility\u003c\/li\u003e\n\u003cli\u003eThread length: 28 mm for secure fastening\u003c\/li\u003e\n\u003cli\u003eThread size: M12 x 1.75, matching Volvo wheel requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis wheel lug bolt features a 67 mm overall length, providing the correct reach for Volvo wheels on models such as the 850, C70, S70, and V70. The 19 mm spanner size allows for easy installation and removal using common tools. With a thread length of 28 mm and a thread size of M12 x 1.75, this lug bolt matches the factory specifications for these Volvo vehicles, ensuring proper engagement and wheel security.\u003c\/p\u003e\u003ch2\u003eCompatible Volvo Models and Applications\u003c\/h2\u003e\u003cp\u003eThis lug bolt 61436899 is compatible with the following Volvo models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolvo 850\u003c\/li\u003e\n\u003cli\u003eVolvo C70\u003c\/li\u003e\n\u003cli\u003eVolvo S70\u003c\/li\u003e\n\u003cli\u003eVolvo V70\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is intended for use in securing wheels to the hub, maintaining safe and stable wheel attachment under normal driving conditions.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Lug Bolt\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug bolts\u003c\/li\u003e\n\u003cli\u003eEnsuring proper thread engagement to prevent wheel loosening\u003c\/li\u003e\n\u003cli\u003eCorrect fitment for Volvo 850, C70, S70, and V70 wheel assemblies\u003c\/li\u003e\n\u003cli\u003eMaintaining wheel alignment and safety during driving\u003c\/li\u003e\n\u003cli\u003ePreventing corrosion-related failures in wheel fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Professional Parts Sweden wheel lug bolt 61436899, use a 19 mm spanner or socket for proper torque application. Ensure threads are clean and free of debris before installation. Torque specifications should follow Volvo manufacturer guidelines to avoid over-tightening or under-tightening. Regular inspection of lug bolts is recommended to maintain wheel safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eProfessional Parts Sweden manufactures this wheel lug bolt to meet OEM standards for fit and function. While specific warranty details are not provided, the product is designed for durability and reliable performance in Volvo 850, C70, S70, and V70 vehicles. Use of genuine or OEM-equivalent parts like this lug bolt supports vehicle safety and longevity.\u003c\/p\u003e","brand":"Professional Parts Sweden","offers":[{"title":"Default Title","offer_id":43589445583029,"sku":"FNJW-61436899","price":14.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PS_61436899_Fro.jpg?v=1774972366"},{"product_id":"professional-parts-sweden-61437699-wheel-lug-nut","title":"Professional Parts Sweden 61437699 Wheel Lug Nut","description":"\u003ch2\u003eProfessional Parts Sweden Wheel Lug Nut Overview\u003c\/h2\u003e\u003cp\u003eThe Professional Parts Sweden wheel lug nut, part number 61437699, is designed specifically for Volvo 240 models. Engineered to meet precise specifications, this lug nut ensures secure wheel attachment and reliable performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLength: 58 mm for optimal fit\u003c\/li\u003e\n\u003cli\u003eSpanner size: 19 mm for standard wrench compatibility\u003c\/li\u003e\n\u003cli\u003eThread length: 27 mm to match wheel stud requirements\u003c\/li\u003e\n\u003cli\u003eThread size: M14 x 1.5, compatible with Volvo 240 wheel studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis wheel lug nut features a 58 mm overall length, providing the necessary engagement for secure fastening on Volvo 240 wheels. The 19 mm spanner size allows for easy installation and removal using common tools. With a thread length of 27 mm and a thread size of M14 x 1.5, this lug nut matches the original equipment specifications for the Volvo 240, ensuring proper fit and function.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Use Cases\u003c\/h2\u003e\u003cp\u003eThis Professional Parts Sweden lug nut is compatible with Volvo 240 vehicles requiring M14 x 1.5 threaded wheel fasteners. It is suitable for addressing issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacing worn or damaged wheel lug nuts on Volvo 240\u003c\/li\u003e\n\u003cli\u003eEnsuring proper wheel security after tire or wheel replacement\u003c\/li\u003e\n\u003cli\u003eMaintaining correct thread engagement to prevent loosening\u003c\/li\u003e\n\u003cli\u003eRestoring factory specifications for wheel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Professional Parts Sweden wheel lug nut 61437699 on a Volvo 240, use a 19 mm spanner or socket for proper torque application. Ensure threads are clean and free of debris before installation. Torque lug nuts to the manufacturer’s recommended specifications to avoid over-tightening or under-tightening, which can affect wheel safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eProfessional Parts Sweden manufactures this wheel lug nut to meet OEM standards for fit and durability. While specific warranty details are not provided, the product is designed to maintain secure wheel attachment and withstand typical driving conditions on Volvo 240 vehicles.\u003c\/p\u003e","brand":"Professional Parts Sweden","offers":[{"title":"Default Title","offer_id":43589458100405,"sku":"FNJW-61437699","price":12.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PS_61437699_Fro_c3548c2a-6226-4bc7-887c-f3d00667da2d.jpg?v=1774972367"},{"product_id":"professional-parts-sweden-77340010-wheel-lug-bolt","title":"Professional Parts Sweden 77340010 Wheel Lug Bolt","description":"\u003ch2\u003eProfessional Parts Sweden Wheel Lug Bolt Overview\u003c\/h2\u003e\u003cp\u003eThe Professional Parts Sweden wheel lug bolt, part number 77340010, is designed for secure and reliable wheel attachment. Specifically compatible with Saab 9-5 models, this lug bolt ensures proper fitment and safety for your vehicle's wheels.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLength: 54 mm for optimal engagement\u003c\/li\u003e\n\u003cli\u003eSpanner size: 17 mm for standard wrench compatibility\u003c\/li\u003e\n\u003cli\u003eThread length: 24 mm to match wheel hub requirements\u003c\/li\u003e\n\u003cli\u003eThread size: M12x1.5, a common metric thread for Saab 9-5\u003c\/li\u003e\n\u003cli\u003eChassis number compatibility: 33015270 (Saab 9-5)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis wheel lug bolt features a 54 mm overall length, providing sufficient thread engagement to secure wheels firmly to the hub. The 17 mm spanner size allows for easy installation and removal using standard tools. With a thread length of 24 mm and a thread size of M12x1.5, it matches the original equipment specifications for Saab 9-5 vehicles with chassis number 33015270. This ensures compatibility and maintains the integrity of the wheel mounting system.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Fitment\u003c\/h2\u003e\u003cp\u003eThis Professional Parts Sweden lug bolt is compatible with Saab 9-5 models, particularly those identified by chassis number 33015270. When replacing wheel lug bolts on your Saab 9-5, using the correct part number 77340010 ensures proper fitment and safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug bolts on Saab 9-5\u003c\/li\u003e\n\u003cli\u003eResolving issues with loose or improperly secured wheels\u003c\/li\u003e\n\u003cli\u003eAddressing corrosion or thread damage on existing lug bolts\u003c\/li\u003e\n\u003cli\u003eEnsuring correct thread size and length for wheel mounting\u003c\/li\u003e\n\u003cli\u003eMaintaining vehicle safety and wheel alignment integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Professional Parts Sweden wheel lug bolt 77340010, ensure the threads are clean and free of debris. Use a torque wrench to tighten the lug bolts to the manufacturer’s recommended torque specification for the Saab 9-5. Avoid over-tightening to prevent thread damage. The 17 mm spanner size fits standard sockets and wrenches, facilitating straightforward installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eProfessional Parts Sweden manufactures this wheel lug bolt to meet OEM standards for fit and function. While specific warranty details are not provided, the part is engineered for durability and reliable performance in Saab 9-5 wheel applications. Using the correct part number 77340010 helps maintain vehicle safety and compliance with manufacturer specifications.\u003c\/p\u003e","brand":"Professional Parts Sweden","offers":[{"title":"Default Title","offer_id":43589556666549,"sku":"FNJW-77340010","price":13.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PS_77340010_Fro.jpg?v=1774972379"},{"product_id":"genuine-1234010128-wheel-cover-clip","title":"Genuine 1234010128 Wheel Cover Clip","description":"\u003ch2\u003eReliable Wheel Cover Clip for Mercedes-Benz 300D and 300TD\u003c\/h2\u003e\u003cp\u003eThe Genuine wheel cover clip, part number 1234010128, is designed specifically for Mercedes-Benz 300D and 300TD models. This essential hardware component ensures secure attachment of wheel covers, maintaining the integrity and appearance of your vehicle's wheels.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine brand quality for authentic fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with Mercedes-Benz 300D and 300TD models\u003c\/li\u003e\n\u003cli\u003ePart number 1234010128 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand road conditions\u003c\/li\u003e\n\u003cli\u003eEasy to install with proper fitment assurance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel cover clip is engineered to meet the specifications required by Mercedes-Benz for the 300D and 300TD models. The Genuine brand ensures that the clip matches original equipment standards, providing a secure hold for wheel covers. Using part number 1234010128 guarantees compatibility and helps avoid fitment issues common with generic alternatives.\u003c\/p\u003e\u003ch2\u003ePurpose and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents wheel covers from loosening or falling off during driving\u003c\/li\u003e\n\u003cli\u003eMaintains wheel aesthetics by securing covers firmly\u003c\/li\u003e\n\u003cli\u003eReduces noise caused by loose wheel covers\u003c\/li\u003e\n\u003cli\u003eProtects wheel covers from damage due to improper attachment\u003c\/li\u003e\n\u003cli\u003eEnsures safety by preventing debris from entering wheel components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Genuine wheel cover clip (1234010128) requires aligning the clip with the designated slots on the wheel cover and wheel rim. It is recommended to inspect the clip for any damage before installation and to replace any worn or broken clips to maintain proper fitment. Using the correct part number ensures a straightforward installation process without modification.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAs a Genuine brand part, this wheel cover clip meets Mercedes-Benz OEM standards for quality and durability. While specific warranty details may vary, Genuine parts typically come with manufacturer-backed warranties that cover defects in material and workmanship. Using this clip helps maintain the original equipment quality of your Mercedes-Benz 300D or 300TD.\u003c\/p\u003e","brand":"Genuine","offers":[{"title":"Default Title","offer_id":43889760469173,"sku":"DFPH-1234010128","price":15.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GU_1234010128_Top.jpg?v=1775003392"},{"product_id":"genuine-36131113132-wheel-lug-nut","title":"Genuine 36131113132 Wheel Lug Nut","description":"\u003ch2\u003eReliable Genuine Wheel Lug Nut for Secure Wheel Attachment\u003c\/h2\u003e\u003cp\u003eThe Genuine wheel lug nut with part number 36131113132 is designed to provide a secure and precise fit for your vehicle's wheels. Engineered to meet OEM specifications, this lug nut ensures proper fastening and safety for your car or truck.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOEM Genuine part number 36131113132 for accurate fitment\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eCompatible with specific vehicle makes and models requiring this lug nut\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain wheel integrity and safety\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant finish to withstand road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Construction and Precise Fitment\u003c\/h2\u003e\u003cp\u003eThis Genuine wheel lug nut is manufactured to meet strict quality standards, ensuring it matches the original equipment specifications. The part number 36131113132 corresponds to a lug nut designed for secure wheel fastening, helping maintain proper torque and wheel alignment. While specific vehicle compatibility depends on the make and model, this lug nut is commonly used in applications requiring OEM Genuine parts for reliable wheel hardware.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged wheel lug nuts\u003c\/li\u003e\n\u003cli\u003eEnsures proper wheel mounting and prevents loosening\u003c\/li\u003e\n\u003cli\u003eAddresses issues with stripped or corroded lug nuts\u003c\/li\u003e\n\u003cli\u003eMaintains wheel safety and vehicle handling stability\u003c\/li\u003e\n\u003cli\u003eSupports proper torque retention during driving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Genuine wheel lug nut 36131113132, ensure the threads are clean and free of debris. Use a calibrated torque wrench to tighten the lug nuts to the vehicle manufacturer’s recommended torque specifications. Avoid over-tightening to prevent damage to the wheel studs or lug nuts. Regular inspection of lug nuts is advised to maintain wheel safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eAs a Genuine OEM part, the 36131113132 wheel lug nut is manufactured to meet original equipment standards for fit, form, and function. This part undergoes quality control inspections to ensure durability and performance. Warranty coverage is subject to the vehicle manufacturer’s terms and conditions for Genuine parts.\u003c\/p\u003e","brand":"Genuine","offers":[{"title":"Default Title","offer_id":43899347075253,"sku":"DFPH-36131113132","price":23.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GU_36131113132_Top.jpg?v=1775003691"},{"product_id":"genuine-36131114180-wheel-cap","title":"Genuine 36131114180 Wheel Cap","description":"\u003ch2\u003eOverview of Genuine BMW Wheel Cap 36131114180\u003c\/h2\u003e\u003cp\u003eThe Genuine wheel cap with part number 36131114180 is designed specifically for select BMW models, including the 318i, 320i, 325e, 325es, 325i, and 325is. This wheel cap provides a precise fit and maintains the original appearance of your BMW wheels.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW 318i, 320i, 325e, 325es, 325i, and 325is models\u003c\/li\u003e\n\u003cli\u003eGenuine BMW part ensuring factory specifications\u003c\/li\u003e\n\u003cli\u003ePart number 36131114180 for exact fitment\u003c\/li\u003e\n\u003cli\u003eDurable construction to protect wheel hub components\u003c\/li\u003e\n\u003cli\u003eMaintains OEM wheel aesthetics and finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis Genuine wheel cap is engineered to meet BMW’s original equipment standards, ensuring a secure fit on the wheel hub of your BMW 3 Series models listed above. The part number 36131114180 corresponds to a wheel cap designed to cover and protect the wheel hub area from dirt, moisture, and corrosion. Its precise dimensions and material quality help preserve the integrity of your wheels while maintaining the authentic look of your BMW 318i, 320i, 325e, 325es, 325i, or 325is.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProtects wheel hub from dirt and debris accumulation\u003c\/li\u003e\n\u003cli\u003ePrevents moisture intrusion that can cause corrosion\u003c\/li\u003e\n\u003cli\u003eRestores original wheel appearance after damage or loss\u003c\/li\u003e\n\u003cli\u003eEnsures proper sealing of wheel components\u003c\/li\u003e\n\u003cli\u003eMaintains wheel balance and reduces vibration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Genuine BMW wheel cap 36131114180 is straightforward and requires no special tools. Align the cap with the wheel hub and press firmly until it snaps into place. Ensure the wheel surface is clean and free of debris before installation to guarantee a secure fit. Removal can be done carefully with a plastic pry tool to avoid damage to the wheel or cap.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAs a Genuine BMW part, the wheel cap 36131114180 meets strict quality control standards for fit, finish, and durability. It is manufactured to OEM specifications to ensure reliable performance and longevity. Warranty coverage is subject to BMW’s standard parts warranty policies, providing assurance of product quality and compatibility with your BMW 318i, 320i, 325e, 325es, 325i, or 325is.\u003c\/p\u003e","brand":"Genuine","offers":[{"title":"Default Title","offer_id":43899354710197,"sku":"DFPH-36131114180","price":81.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GU_36131114180_Top.jpg?v=1775003691"},{"product_id":"dorman-610-004-wheel-lug-stud","title":"Dorman 610-004 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Ford and Lincoln Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-004 wheel lug stud is engineered to provide reliable performance for select Ford and Lincoln models. Crafted from steel with a fine thread design, this lug stud ensures secure wheel attachment and long-lasting durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise\u003c\/li\u003e\n\u003cli\u003eThread Size: M14-1.50 fine thread\u003c\/li\u003e\n\u003cli\u003eLength: 59.77 mm total length with 46.81 mm threaded section\u003c\/li\u003e\n\u003cli\u003eShoulder Diameter: 0.6 inches with round shoulder shape\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud for enhanced grip\u003c\/li\u003e\n\u003cli\u003ePackage Contents: 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eBolt Grade: 8 for reliable strength\u003c\/li\u003e\n\u003cli\u003eCompatible with metric thread standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-004 wheel lug stud features a 14 mm thread diameter with a 1.5 mm thread pitch, designed to fit metric bolt patterns commonly found on Ford and Lincoln trucks and SUVs. The serrated stud style and round shoulder shape provide a secure fit that resists loosening under vibration. With a total length of 59.77 mm and a threaded length of 46.81 mm, this stud is engineered to meet OEM specifications. The silver finish offers corrosion resistance, while the grade 8 bolt rating ensures the strength needed for heavy-duty applications.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with a range of Ford and Lincoln models, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Bronco\u003c\/li\u003e\n\u003cli\u003eFord Expedition\u003c\/li\u003e\n\u003cli\u003eFord F-150 and F-150 Lightning\u003c\/li\u003e\n\u003cli\u003eLincoln Mark LT\u003c\/li\u003e\n\u003cli\u003eLincoln Navigator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the Dorman 610-004 to replace worn or damaged wheel lug studs on these vehicles to maintain safe and secure wheel attachment.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Wheel Lug Stud\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of stripped or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixing loose or vibrating wheels due to worn studs\u003c\/li\u003e\n\u003cli\u003eRestoring proper wheel alignment and fitment\u003c\/li\u003e\n\u003cli\u003ePreventing wheel detachment caused by faulty studs\u003c\/li\u003e\n\u003cli\u003eUpgrading to a serrated stud style for improved grip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-004 wheel lug stud, ensure the vehicle is securely lifted and the wheel hub is clean and free of debris. Use the correct torque specifications for your specific Ford or Lincoln model to avoid over-tightening or under-tightening. The serrated shoulder design requires proper seating to ensure the stud remains firmly in place. It is recommended to replace all studs on the wheel hub simultaneously for balanced performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. The 610-004 part number is backed by Dorman's quality assurance processes to ensure durability and reliability. Please refer to Dorman's warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017268523189,"sku":"BKKZ-610-004","price":78.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610004_Fro_c5e07557-97f0-43d7-ad40-b4b446d0623e.jpg?v=1775009126"},{"product_id":"dorman-610-018-wheel-lug-bolt","title":"Dorman 610-018 Wheel Lug Bolt - Front or Rear","description":"\u003ch2\u003eDurable Wheel Lug Bolts for Dodge Lancer\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-018 wheel lug bolts are engineered to provide secure and reliable fastening for your Dodge Lancer. Constructed from steel with a silver finish, these lug bolts ensure a strong hold and corrosion resistance for your vehicle's wheels.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel construction for strength and durability\u003c\/li\u003e\n\u003cli\u003eLength: 1 inch with an overall length of 1.585 inches\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 fine thread with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eBolt Grade: 8, suitable for demanding automotive applications\u003c\/li\u003e\n\u003cli\u003eSeat Style: Conical seat at 60 degrees for proper fitment\u003c\/li\u003e\n\u003cli\u003eHex Size: 0.75 inch for standard wrench compatibility\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 lug bolts\u003c\/li\u003e\n\u003cli\u003eSAE thread type designed for Dodge Lancer models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details of Dorman 610-018 Wheel Lug Bolts\u003c\/h2\u003e\u003cp\u003eThese wheel lug bolts feature a fine thread type with a 0.5-inch thread diameter, providing precise engagement with the wheel hub. The conical seat style at 60 degrees ensures a secure fit that prevents loosening during vehicle operation. With a bolt grade of 8, these lug bolts meet the strength requirements necessary for safe wheel attachment. The 0.75-inch hex size allows for easy installation and removal using common tools. Designed specifically for Dodge Lancer vehicles, the Dorman 610-018 lug bolts maintain factory specifications for thread pitch and length.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Use Cases\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug bolts on Dodge Lancer models\u003c\/li\u003e\n\u003cli\u003eSecuring aftermarket wheels requiring SAE 1\/2-20 fine thread lug bolts\u003c\/li\u003e\n\u003cli\u003eRestoring proper wheel fitment and safety after wheel maintenance\u003c\/li\u003e\n\u003cli\u003eAddressing stripped or corroded lug bolts that compromise wheel security\u003c\/li\u003e\n\u003cli\u003eEnsuring correct torque application with grade 8 bolts for safe driving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-018 wheel lug bolts, ensure the conical seat aligns properly with the wheel mounting surface to avoid damage. Use a torque wrench to tighten the bolts to the manufacturer’s recommended specifications for the Dodge Lancer. Avoid cross-threading by starting the bolts by hand before using tools. Regularly inspect lug bolts for signs of wear or corrosion to maintain wheel safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug bolts are manufactured to meet industry standards for strength and durability. The steel construction and grade 8 rating provide reliable performance under normal driving conditions. While specific warranty details are not provided, Dorman products typically adhere to quality control processes to ensure fitment and function for Dodge Lancer vehicles.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017269309621,"sku":"BKKZ-610-018","price":31.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610018_Fro_ac11a690-a645-48ac-aa7c-f03d445bb136.jpg?v=1775009126"},{"product_id":"dorman-610-019-wheel-lug-bolt","title":"Dorman 610-019 Wheel Lug Bolt - Front or Rear","description":"\u003ch2\u003eReliable Wheel Lug Bolts for Buick and Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-019 wheel lug bolts provide a secure and durable fastening solution for select Buick and Dodge models. Designed with precision, these steel lug bolts ensure proper wheel attachment and safety for vehicles like the Buick Century and Dodge Lancer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003e1.55 inch overall length with 1.01 inch fine thread length\u003c\/li\u003e\n\u003cli\u003e9\/16-18 thread size with 18 threads per inch\u003c\/li\u003e\n\u003cli\u003eConical 60-degree seat style for secure fitment\u003c\/li\u003e\n\u003cli\u003eHex size of 0.75 inches for standard wrench compatibility\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 lug bolts for complete wheel installation\u003c\/li\u003e\n\u003cli\u003eMeets SAE specifications with bolt grade 8 strength\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Specifications of Dorman 610-019 Wheel Lug Bolts\u003c\/h2\u003e\u003cp\u003eThese Dorman wheel lug bolts are engineered with a fine thread type and a thread diameter of 0.5625 inches, providing a precise fit for wheel hubs on compatible Buick and Dodge vehicles. The conical seat style at 60 degrees ensures the lug bolts sit flush against the wheel, reducing the risk of loosening during operation. With a bolt grade of 8, these lug bolts offer reliable tensile strength suitable for everyday driving conditions. The silver finish adds corrosion resistance, extending the lifespan of the hardware.\u003c\/p\u003e\u003ch2\u003eCompatible Buick and Dodge Models\u003c\/h2\u003e\u003cp\u003eThese lug bolts are compatible with several Buick and Dodge models, including the Buick Century, LeSabre, Roadmaster, and Skylark, as well as the Dodge Lancer. Using the correct lug bolts like the Dorman 610-019 ensures proper wheel alignment and safety on these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug bolts\u003c\/li\u003e\n\u003cli\u003eRestoring secure wheel attachment after wheel maintenance\u003c\/li\u003e\n\u003cli\u003eAddressing stripped or corroded threads on existing lug bolts\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment for Buick Century and Dodge Lancer wheels\u003c\/li\u003e\n\u003cli\u003eMaintaining vehicle safety by preventing wheel loosening\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-019 lug bolts, ensure the threads are clean and free of debris. Use a torque wrench to tighten the bolts to the manufacturer’s recommended specifications to avoid over-tightening or under-tightening. The 0.75 inch hex size fits standard sockets, making installation straightforward. Always replace lug bolts in sets to maintain even clamping force across the wheel.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug bolts are manufactured to meet SAE standards and undergo quality inspections to ensure durability and fitment accuracy. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship. Refer to Dorman’s official documentation for complete warranty information.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017269702837,"sku":"BKKZ-610-019","price":33.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610019_Fro_4af16b8f-ae54-400f-bde2-2a1c3235b457.jpg?v=1775009126"},{"product_id":"dorman-610-024-wheel-lug-stud","title":"Dorman 610-024 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chevrolet and Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-024 wheel lug stud is engineered to provide reliable wheel fastening for select Chevrolet and Dodge models. Crafted from steel with precise SAE threading, this stud ensures secure wheel attachment and long-lasting performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eThread Size: 7\/16-20 with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eLength: 1.375 inches overall with 1.37 inches thread length\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.755 inches with serrated stud style\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.57 inches for proper fitment\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eCompatible with SAE tools and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-024 wheel lug stud features a serrated stud design without a clip head, providing a secure grip between the wheel and hub assembly. The 7\/16-20 thread size and 20 threads per inch match factory specifications for Chevrolet Bel Air and Dodge Dart and Lancer models. With a shoulder length of 0.438 inches, this stud fits precisely to maintain wheel alignment and safety. The clockwise thread direction supports standard tightening procedures, ensuring compatibility with common automotive tools.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Resolution\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is designed for use in wheel and tire assemblies on Chevrolet Bel Air and Dodge Dart and Lancer vehicles. It addresses several common issues:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel studs to restore wheel security\u003c\/li\u003e\n\u003cli\u003eCorrection of stripped or damaged threads preventing proper lug nut torque\u003c\/li\u003e\n\u003cli\u003eUpgrading to durable steel studs for improved longevity\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment for wheels requiring serrated stud style\u003c\/li\u003e\n\u003cli\u003eMaintaining factory specifications for safe wheel mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-024 wheel lug stud, ensure the hub is clean and free of debris. Use appropriate SAE tools to tighten lug nuts to manufacturer torque specifications. The serrated stud design requires proper seating to prevent loosening. It is recommended to replace all studs on the wheel hub to maintain even clamping force and wheel balance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-024 part number undergoes rigorous quality control to ensure durability and performance. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017270194357,"sku":"BKKZ-610-024","price":31.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610024_Fro.jpg?v=1775009127"},{"product_id":"dorman-610-025-wheel-lug-stud","title":"Dorman 610-025 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Select GM and Dodge Models\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-025 wheel lug stud is engineered to provide reliable wheel fastening for a range of Buick, Cadillac, Chevrolet, Dodge, Oldsmobile, and Pontiac vehicles. Designed with precision steel construction and a serrated stud style, this part ensures secure wheel attachment and long-lasting performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel for strength and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 7\/16-20 SAE thread size\u003c\/li\u003e\n\u003cli\u003e1.313 inch overall length with 1.285 inch thread length\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a .730 inch head diameter for secure fitment\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for multiple wheel installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-025 wheel lug stud features a 0.437 inch thread diameter and a 0.564 inch splined bore diameter, designed to fit specific GM and Dodge models. The shoulder length measures 0.375 inches, providing proper seating and alignment for wheel mounting. This stud uses SAE threading with 20 threads per inch, compatible with vehicles requiring a 7\/16-20 thread size. Compatible models include Chevrolet Camaro, Impala, Monte Carlo, and Caprice; Buick LeSabre and Century; Pontiac GTO and Grand Prix; Cadillac Seville; Dodge Dart and Phoenix; and several Oldsmobile and Pontiac models such as Cutlass Supreme and Bonneville.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged wheel lug studs to restore wheel security\u003c\/li\u003e\n\u003cli\u003eAddresses issues with stripped or broken threads on existing studs\u003c\/li\u003e\n\u003cli\u003ePrevents wheel vibration caused by loose or faulty studs\u003c\/li\u003e\n\u003cli\u003eEnsures proper wheel alignment and fitment on compatible GM and Dodge vehicles\u003c\/li\u003e\n\u003cli\u003eSupports safe wheel installation and removal during maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-025 wheel lug studs, ensure the vehicle is securely lifted and the wheel hub is clean and free of debris. Use the correct torque specifications for your vehicle to avoid over-tightening or under-tightening the studs. The serrated stud style helps prevent loosening, but periodic inspection is recommended. Replacement should be done in sets to maintain balanced wheel fastening.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM specifications, providing reliable performance and durability. Made from high-quality steel, the 610-025 part number undergoes strict quality control to ensure fitment and function. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017271013557,"sku":"BKKZ-610-025","price":29.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610025_Fro.jpg?v=1775009127"},{"product_id":"dorman-610-032-wheel-lug-stud","title":"Dorman 610-032 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eReliable Steel Wheel Lug Stud for Select Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-032 wheel lug stud is engineered to provide secure and durable fastening for wheels on various Cadillac, Chrysler, Jeep, and Oldsmobile models. Crafted from steel with a serrated stud style, this lug stud ensures a strong grip and reliable performance for your vehicle's wheel assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel material for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size and 20 threads per inch\u003c\/li\u003e\n\u003cli\u003e1.375 inch overall length with 1.335 inch thread length for proper fitment\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.795 inch head diameter for secure wheel mounting\u003c\/li\u003e\n\u003cli\u003eCompatible with select Cadillac, Chrysler, Jeep, and Oldsmobile models including 88, 98, 300, CJ5, Commercial Chassis, Newport, New Yorker, Starfire, Town \u0026amp; Country, and Wagoneer\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for multiple replacements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-032 wheel lug stud features a SAE thread standard with a 0.5 inch thread diameter and a splined bore diameter of 0.618 inches. The shoulder length measures 0.531 inches, designed to fit securely within the wheel hub assembly. This serrated stud style lug stud is intended for vehicles requiring a clockwise thread direction and a 1\/2-20 thread size, ensuring compatibility with specific models from Cadillac, Chrysler, Jeep, and Oldsmobile. The part number 610-032 corresponds to this exact specification, making it a precise replacement part for maintaining wheel integrity.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs on Cadillac 88 and 98 models\u003c\/li\u003e\n\u003cli\u003eRestoring secure wheel attachment on Jeep CJ5 and Wagoneer vehicles\u003c\/li\u003e\n\u003cli\u003eFixing stripped or broken studs on Chrysler Town \u0026amp; Country and Newport models\u003c\/li\u003e\n\u003cli\u003eAddressing loose or missing studs on Oldsmobile 300 and Starfire cars\u003c\/li\u003e\n\u003cli\u003eEnsuring proper wheel fitment on Commercial Chassis applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-032 wheel lug stud, ensure the wheel hub is clean and free of debris. Use appropriate tools to press or hammer the stud into place carefully, avoiding damage to the serrated section. Torque the lug nuts to the vehicle manufacturer’s specifications to maintain wheel security. It is recommended to replace all wheel lug studs on the axle to ensure even wear and consistent performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-032 part is designed for durability and reliable performance under normal driving conditions. While specific warranty details may vary, Dorman typically offers a limited warranty against defects in material and workmanship, providing confidence in the product’s quality.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017271537845,"sku":"BKKZ-610-032","price":33.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610032_Fro.jpg?v=1775009127"},{"product_id":"dorman-610-036-wheel-lug-stud","title":"Dorman 610-036 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Dodge Dart and Lancer\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-036 wheel lug stud is engineered to provide reliable performance for your Dodge Dart and Lancer vehicles. Crafted from high-quality steel, this lug stud ensures secure wheel attachment and long-lasting durability under various driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from robust steel material for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size and 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eThread length of 1.425 inches and overall stud length of 1.438 inches\u003c\/li\u003e\n\u003cli\u003eNon-serrated stud style with a head diameter of 0.915 inches\u003c\/li\u003e\n\u003cli\u003eIncludes 10 wheel lug studs per package for complete replacement needs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Design Details\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-036 wheel lug stud features a SAE thread size of 1\/2-20 with 20 threads per inch, designed for precise fitment on compatible Dodge Dart and Lancer models. The stud length measures 1.438 inches, with a thread length of 1.425 inches, providing ample engagement for secure wheel mounting. Its non-serrated style and a head diameter of 0.915 inches ensure compatibility with factory wheels and aftermarket options. The splined bore diameter is 0.645 inches, and the shoulder length is 0.469 inches, contributing to proper alignment and fitment during installation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is specifically compatible with Dodge Dart and Dodge Lancer models, making it a suitable replacement part for maintaining wheel security and safety. The Dorman 610-036 is ideal for addressing common issues related to worn or damaged wheel studs on these vehicles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement for stripped or damaged wheel lug studs on Dodge Dart and Lancer\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel alignment and secure fitment\u003c\/li\u003e\n\u003cli\u003ePrevents wheel wobble and vibration caused by faulty studs\u003c\/li\u003e\n\u003cli\u003eEnsures safe and reliable wheel attachment after brake or suspension work\u003c\/li\u003e\n\u003cli\u003eSupports maintenance of factory wheel hardware specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-036 wheel lug studs, ensure the vehicle is securely lifted and the wheel hub is clean and free of debris. Use appropriate tools to press or hammer the stud into the hub carefully, avoiding damage to the threads. Torque the lug nuts to the manufacturer’s specifications to maintain proper clamping force. It is recommended to replace all wheel studs on the same axle to ensure uniform performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel, the 610-036 part number undergoes rigorous quality control to ensure reliable performance. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship, providing confidence in the product’s durability and safety.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017272488117,"sku":"BKKZ-610-036","price":32.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610036_Fro_74e76a38-1a9f-4644-92fb-0243f41342c7.jpg?v=1775009128"},{"product_id":"dorman-610-039-wheel-lug-stud","title":"Dorman 610-039 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chrysler, Dodge, and Oldsmobile\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-039 wheel lug stud is engineered to provide reliable wheel fastening for select Chrysler, Dodge, and Oldsmobile vehicles. Crafted from steel with a serrated stud style, this lug stud ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size and 20 threads per inch\u003c\/li\u003e\n\u003cli\u003e1.625 inch overall length with 1.605 inch thread length for proper fitment\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.775 inch head diameter for secure wheel mounting\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Chrysler, Dodge, and Oldsmobile models including 1998 300, Challenger, Charger, Dart, Delta 88, Lancer, Monaco, Newport, New Yorker, and Town \u0026amp; Country\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for complete replacement needs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Design Details\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-039 wheel lug stud features a SAE thread size of 1\/2-20 with a clockwise thread direction, designed to match factory specifications for select vehicles. The serrated stud style enhances grip between the stud and wheel, reducing the risk of loosening under normal driving conditions. With a thread diameter of 0.5 inches and a splined bore diameter of 0.625 inches, this stud fits securely into the hub assembly. The shoulder length of 0.719 inches ensures proper seating and alignment during installation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with a range of Chrysler, Dodge, and Oldsmobile models, including the 1998 Chrysler 300, Dodge Challenger, Charger, Dart, Oldsmobile Delta 88, Lancer, Monaco, Newport, New Yorker, and Town \u0026amp; Country. It is designed to replace worn or damaged studs to maintain wheel security and vehicle safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplaces stripped or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel fitment and alignment\u003c\/li\u003e\n\u003cli\u003ePrevents wheel vibration caused by loose studs\u003c\/li\u003e\n\u003cli\u003eEnsures safe and secure wheel attachment\u003c\/li\u003e\n\u003cli\u003eAddresses corrosion or wear-related stud failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-039 wheel lug stud, ensure the hub assembly is clean and free of debris. Use appropriate tools to press or hammer the stud into place carefully, avoiding damage to the threads or splines. Torque lug nuts to manufacturer specifications to maintain proper clamping force. It is recommended to replace all wheel studs on the axle to ensure uniform performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-039 part number undergoes rigorous quality control to ensure durability and reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017272881333,"sku":"BKKZ-610-039","price":35.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610039_Fro.jpg?v=1775009128"},{"product_id":"dorman-610-041-wheel-lug-stud","title":"Dorman 610-041 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eReliable Wheel Lug Stud for Chevrolet and GMC Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-041 wheel lug stud is engineered to provide secure wheel attachment for select Chevrolet and GMC models. Crafted from durable steel, this serrated stud ensures a strong grip and reliable performance for vehicles like the Chevrolet Bel Air, Blazer, Corvette, El Camino, Impala, and GMC Jimmy and K10 Suburban.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 7\/16-20 thread size\u003c\/li\u003e\n\u003cli\u003e1.375 inch overall length with 1.355 inch thread length\u003c\/li\u003e\n\u003cli\u003eSerrated stud style for enhanced wheel retention\u003c\/li\u003e\n\u003cli\u003eFits Chevrolet and GMC models including Bel Air, Blazer, Corvette, El Camino, Impala, Jimmy, and K10 Suburban\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications of Dorman 610-041 Wheel Lug Stud\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud features a 0.437 inch thread diameter and a 0.575 inch splined bore diameter, designed to match factory specifications for proper fitment. The head diameter measures 0.735 inches, and the shoulder length is 0.313 inches, ensuring compatibility with the wheel and hub assembly. The stud uses SAE threading with 20 threads per inch, turning clockwise for secure installation. The serrated style helps prevent loosening under vibration, maintaining wheel stability.\u003c\/p\u003e\u003ch2\u003eCompatible Chevrolet and GMC Models\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-041 wheel lug stud is compatible with a range of Chevrolet and GMC vehicles, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Bel Air\u003c\/li\u003e\n\u003cli\u003eChevrolet Blazer\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette\u003c\/li\u003e\n\u003cli\u003eChevrolet El Camino\u003c\/li\u003e\n\u003cli\u003eChevrolet Impala\u003c\/li\u003e\n\u003cli\u003eGMC Jimmy\u003c\/li\u003e\n\u003cli\u003eGMC K10 Suburban\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is designed to address several common issues related to wheel hardware:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel studs\u003c\/li\u003e\n\u003cli\u003eRestoring proper wheel fitment and alignment\u003c\/li\u003e\n\u003cli\u003ePreventing wheel vibration caused by loose studs\u003c\/li\u003e\n\u003cli\u003eEnsuring safe and secure wheel attachment\u003c\/li\u003e\n\u003cli\u003eMaintaining factory specifications for thread size and length\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-041 wheel lug stud, ensure the hub is clean and free of debris. Use the correct tools to press or hammer the stud into the hub carefully, avoiding damage to the threads. Torque the lug nuts to manufacturer specifications to maintain proper clamping force. Verify the clockwise thread direction before installation to prevent cross-threading.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-041 part number undergoes rigorous quality control to ensure durability and reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017273503925,"sku":"BKKZ-610-041","price":28.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610041_Fro.jpg?v=1775009129"},{"product_id":"dorman-610-048-wheel-lug-stud","title":"Dorman 610-048 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Reliable Wheel Attachment\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-048 wheel lug stud is engineered to provide secure and consistent wheel fastening for a variety of vehicles. Crafted from high-quality steel, this serrated stud ensures a strong grip and long-lasting performance, making it suitable for applications requiring dependable wheel hardware.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel material for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 5\/8-18 thread size and 18 threads per inch\u003c\/li\u003e\n\u003cli\u003eOverall length of 2 inches with a thread length of 1.965 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.925 inch head diameter for secure fitment\u003c\/li\u003e\n\u003cli\u003eSplined bore diameter of 0.685 inches and shoulder length of 0.563 inches\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for multiple replacements\u003c\/li\u003e\n\u003cli\u003eDesigned to SAE specifications for compatibility with many North American vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Compatibility Details\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-048 wheel lug stud features a 5\/8-18 thread size with a clockwise thread direction, making it compatible with many trucks and SUVs that require SAE-standard hardware. Its serrated stud design helps prevent loosening by biting into the wheel hub, ensuring a secure connection. The 2-inch length and 0.925 inch head diameter provide the necessary dimensions for proper fitment in applications such as Ford F-150, Chevrolet Silverado, and Dodge Ram models that use similar lug stud specifications.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs to restore wheel security\u003c\/li\u003e\n\u003cli\u003eFixing stripped or damaged threads that prevent proper lug nut tightening\u003c\/li\u003e\n\u003cli\u003eAddressing wheel vibration issues caused by loose or faulty studs\u003c\/li\u003e\n\u003cli\u003eUpgrading hardware to maintain safe wheel attachment after off-road use\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment for vehicles requiring 5\/8-18 SAE serrated studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-048 wheel lug stud, ensure the hub is clean and free of debris to allow proper seating of the serrated shoulder. Use a press or appropriate tool to install the stud evenly without damaging the threads. Torque lug nuts to the vehicle manufacturer’s specifications to avoid over-tightening or under-tightening, which can lead to premature stud failure or wheel issues.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 610-048 part number is backed by Dorman’s quality assurance processes, ensuring consistent material strength and thread accuracy. Please refer to Dorman’s warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017273929909,"sku":"BKKZ-610-048","price":41.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610048_Fro.jpg?v=1775009129"},{"product_id":"dorman-610-049-wheel-lug-stud","title":"Dorman 610-049 Wheel Lug Stud - Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chevrolet P30\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-049 wheel lug stud is engineered to provide reliable performance for Chevrolet P30 vehicles. Crafted from steel with a serrated stud style, this lug stud ensures secure wheel attachment and long-lasting durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eLength: 3 inches total length\u003c\/li\u003e\n\u003cli\u003eThread Diameter: 0.625 inches (5\/8-18 thread size)\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.68 inches for precise fit\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.915 inches for secure seating\u003c\/li\u003e\n\u003cli\u003eThread Length: 2.965 inches with 18 threads per inch\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud for enhanced grip\u003c\/li\u003e\n\u003cli\u003ePackage Contents: 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eSAE thread standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Dorman wheel lug stud, part number 610-049, is specifically designed for use with Chevrolet P30 models. The serrated stud style helps prevent loosening by biting into the wheel, providing a secure fit. With a 5\/8-18 thread size and 18 threads per inch, it matches factory specifications for proper installation and performance. The 3-inch length and 0.915-inch head diameter ensure compatibility with OEM wheels and hardware.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is ideal for addressing common wheel fastening issues on Chevrolet P30 vehicles. It can be used to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplace worn or damaged wheel studs to maintain wheel security\u003c\/li\u003e\n\u003cli\u003eFix stripped or damaged threads that compromise lug nut torque\u003c\/li\u003e\n\u003cli\u003eRestore proper fitment after corrosion or impact damage\u003c\/li\u003e\n\u003cli\u003eEnsure safe wheel mounting for heavy-duty or commercial use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-049 wheel lug stud, ensure the wheel hub is clean and free of debris. Use the correct tools to press or hammer the stud into the hub carefully, avoiding damage to the splined bore. Torque lug nuts to manufacturer specifications to maintain safety and performance. This stud’s clockwise thread direction aligns with standard lug nut tightening procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel with precise threading, the 610-049 part number offers reliable performance for Chevrolet P30 vehicles. While specific warranty details may vary, Dorman products typically come with a limited warranty against defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017276289205,"sku":"BKKZ-610-049","price":44.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610049_Fro.jpg?v=1775009129"},{"product_id":"dorman-610-052-wheel-lug-stud","title":"Dorman 610-052 Wheel Lug Stud - Front","description":"\u003ch2\u003eOverview of Dorman 610-052 Wheel Lug Stud\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-052 wheel lug stud is engineered from durable steel to provide reliable wheel fastening for various vehicle applications. Designed with a 3\/4-16 thread size and a non-serrated stud style, this part ensures secure wheel attachment for compatible trucks and SUVs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eThread size: 3\/4-16 with 16 threads per inch\u003c\/li\u003e\n\u003cli\u003eLength: 2.25 inches with 0.98 inch thread length\u003c\/li\u003e\n\u003cli\u003eNon-serrated stud with clip head style for secure fit\u003c\/li\u003e\n\u003cli\u003eHead diameter measures 1.344 inches for proper wheel seating\u003c\/li\u003e\n\u003cli\u003eSplined bore diameter of 0.877 inches for precise installation\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction, SAE standard\u003c\/li\u003e\n\u003cli\u003eShoulder length of 1.125 inches for optimal wheel alignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-052 wheel lug stud is designed to meet SAE specifications with a 3\/4-16 thread size and 16 threads per inch, making it suitable for many heavy-duty vehicles including certain Ford F-Series trucks and Chevrolet Silverado models. Its steel construction offers strength and resistance to wear, while the non-serrated stud with clip head style provides a secure and stable connection between the wheel and hub assembly. The 2.25-inch overall length and 1.344-inch head diameter ensure compatibility with wheels requiring this specific stud size. The splined bore diameter of 0.877 inches allows for a tight fit into the hub, reducing the risk of loosening under normal driving conditions.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged wheel lug studs on Ford F-150 and Chevrolet Silverado trucks\u003c\/li\u003e\n\u003cli\u003eFixes issues related to loose or stripped wheel studs causing wheel vibration\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel alignment and secure fastening after wheel removal or brake service\u003c\/li\u003e\n\u003cli\u003eAddresses corrosion or rust-related stud failure in older vehicles\u003c\/li\u003e\n\u003cli\u003eEnsures safe wheel mounting for vehicles used in towing or heavy load conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify thread size and length compatibility with your vehicle’s hub before installation\u003c\/li\u003e\n\u003cli\u003eUse a torque wrench to tighten lug nuts to manufacturer specifications to avoid stud damage\u003c\/li\u003e\n\u003cli\u003eInspect hub splines for damage prior to installing the new stud\u003c\/li\u003e\n\u003cli\u003eReplace studs in sets to maintain even wheel clamping force\u003c\/li\u003e\n\u003cli\u003eApply anti-seize compound on threads if recommended by vehicle manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. The 610-052 part number undergoes rigorous quality control to ensure durability and performance under typical driving conditions. While specific warranty details may vary, Dorman generally offers limited warranties covering defects in material and workmanship. Consult product documentation or Dorman’s official resources for exact warranty terms.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017276518581,"sku":"BKKZ-610-052","price":103.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610052_Fro.jpg?v=1775009129"},{"product_id":"dorman-610-070-wheel-lug-bolt","title":"Dorman 610-070 Wheel Lug Bolt - Front","description":"\u003ch2\u003eOverview of Dorman 610-070 Wheel Lug Bolt for Buick LeSabre\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-070 wheel lug bolt is designed specifically for Buick LeSabre models, providing reliable fastening for your vehicle's wheels. Constructed from durable steel with a silver finish, this lug bolt ensures secure wheel attachment and long-lasting performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eLength: 1.225 inches thread length, 1.81 inches overall length\u003c\/li\u003e\n\u003cli\u003eThread Type: Fine thread with 9\/16-18 thread size and 18 threads per inch\u003c\/li\u003e\n\u003cli\u003eBolt Grade: 8, suitable for automotive wheel applications\u003c\/li\u003e\n\u003cli\u003eHex Size: 0.75 inch for standard wrench compatibility\u003c\/li\u003e\n\u003cli\u003eSeat Style: Conical seat at 60 degrees for proper fitment\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 lug bolts\u003c\/li\u003e\n\u003cli\u003eSAE thread standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-070 wheel lug bolt is engineered to meet the specifications required for Buick LeSabre vehicles. Its steel construction provides the necessary tensile strength to withstand the stresses of wheel mounting and road conditions. The fine thread design with a 9\/16-18 thread size and 18 threads per inch ensures a precise and secure fit. The conical seat style at 60 degrees helps center the wheel properly on the hub, reducing the risk of vibration or loosening over time. With a hex size of 0.75 inches, these lug bolts are compatible with common automotive tools, facilitating straightforward installation and removal.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug bolts on Buick LeSabre\u003c\/li\u003e\n\u003cli\u003eEnsuring proper wheel alignment and secure fastening\u003c\/li\u003e\n\u003cli\u003ePreventing wheel vibration caused by improper lug bolt fitment\u003c\/li\u003e\n\u003cli\u003eAddressing stripped or corroded lug bolts that compromise safety\u003c\/li\u003e\n\u003cli\u003eMaintaining factory specifications for wheel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUse a torque wrench to tighten lug bolts to manufacturer-recommended specifications\u003c\/li\u003e\n\u003cli\u003eInspect wheel studs and lug bolt threads for damage before installation\u003c\/li\u003e\n\u003cli\u003eApply anti-seize compound if recommended to prevent corrosion and ease future removal\u003c\/li\u003e\n\u003cli\u003eInstall lug bolts in a star pattern to evenly distribute pressure\u003c\/li\u003e\n\u003cli\u003eVerify conical seat engagement to ensure proper wheel centering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug bolts are manufactured to meet or exceed OEM standards for fit, form, and function. The 610-070 part number undergoes rigorous quality control to ensure durability and performance on Buick LeSabre vehicles. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in your purchase.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017277567157,"sku":"BKKZ-610-070","price":36.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610070_Fro.jpg?v=1775009130"},{"product_id":"dorman-610-071-wheel-lug-stud","title":"Dorman 610-071 Wheel Lug Stud - Rear","description":"\u003ch2\u003eOverview of Dorman 610-071 Wheel Lug Stud\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-071 wheel lug stud is engineered from durable steel to provide reliable fastening for your vehicle's wheels. Designed with a serrated stud style and SAE thread specifications, this part ensures secure wheel attachment for various makes and models requiring a 5\/8-18 thread size.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 5\/8-18 thread size\u003c\/li\u003e\n\u003cli\u003eThread length of 2.83 inches and overall length of 2.875 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.915 inch head diameter\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for multiple replacements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-071 wheel lug stud features a 0.625 inch thread diameter and a 0.68 inch splined bore diameter, designed to fit securely into compatible wheel hubs. The serrated stud style enhances grip between the stud and wheel, reducing the risk of loosening under normal driving conditions. With a shoulder length of 1 inch, this stud provides proper seating and alignment for wheels. The SAE thread standard and 18 threads per inch ensure compatibility with vehicles that require these specifications, including many Ford F-150, Chevrolet Silverado, and Dodge Ram models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixing stripped or broken threads on existing studs\u003c\/li\u003e\n\u003cli\u003eEnsuring proper wheel alignment and secure fastening\u003c\/li\u003e\n\u003cli\u003ePreventing wheel vibration caused by loose studs\u003c\/li\u003e\n\u003cli\u003eMaintaining safety and performance on trucks and SUVs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-071 wheel lug stud, ensure the hub is clean and free of debris. Use a proper press or hammer tool designed for lug stud installation to avoid damaging the stud or hub. Tighten lug nuts to the manufacturer’s recommended torque specifications to maintain safety and performance. This part is compatible with vehicles requiring a 5\/8-18 SAE thread stud with a serrated style, commonly found on full-size pickup trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-071 part number undergoes rigorous quality control to ensure durability and reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in your purchase.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017277960373,"sku":"BKKZ-610-071","price":59.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610071_Fro_f95b0a99-e033-4aca-914a-ec2cc617ca94.jpg?v=1775009130"},{"product_id":"dorman-610-072-wheel-lug-stud","title":"Dorman 610-072 Wheel Lug Stud - Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Reliable Wheel Attachment\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-072 wheel lug stud is engineered to provide secure and consistent wheel fastening for a variety of vehicles. Crafted from high-quality steel, this serrated stud ensures a strong grip and long-lasting performance, making it suitable for applications requiring SAE 5\/8-18 thread size.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 18 threads per inch\u003c\/li\u003e\n\u003cli\u003eThread diameter of 0.625 inches and thread length of 2.605 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a head diameter of 0.910 inches\u003c\/li\u003e\n\u003cli\u003eShoulder length of 0.781 inches and splined bore diameter of 0.688 inches\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-072 wheel lug stud features a 5\/8-18 SAE thread size, making it compatible with many trucks and SUVs that require this specification. The serrated stud design helps prevent loosening under vibration, while the steel construction resists wear and corrosion. With a length of 2.625 inches, these studs fit wheel hubs designed for this size, commonly found on vehicles such as Ford F-150, Chevrolet Silverado, and Dodge Ram models. The clockwise thread direction aligns with standard lug nut tightening procedures.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixing stripped or broken threads on existing studs\u003c\/li\u003e\n\u003cli\u003eEnsuring proper wheel alignment and secure fastening\u003c\/li\u003e\n\u003cli\u003eAddressing wheel vibration caused by loose or faulty studs\u003c\/li\u003e\n\u003cli\u003eMaintaining safety and performance on heavy-duty trucks and SUVs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-072 wheel lug studs, ensure the hub is clean and free of debris. Use a proper press or hammer tool designed for lug stud installation to avoid damaging the threads or the stud itself. Tighten lug nuts to the manufacturer’s recommended torque specifications to prevent over-tightening or loosening. It is advisable to replace all studs on the wheel hub simultaneously to maintain even load distribution.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Each stud undergoes rigorous quality control to ensure durability and reliability. The 610-072 part number is backed by Dorman’s limited warranty, covering defects in material and workmanship under normal use conditions.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017278419125,"sku":"BKKZ-610-072","price":50.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610072_Fro.jpg?v=1775009131"},{"product_id":"dorman-610-073-wheel-lug-stud","title":"Dorman 610-073 Wheel Lug Stud - Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chevrolet C20 Suburban\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-073 wheel lug stud is engineered to provide reliable fastening for your Chevrolet C20 Suburban. Crafted from steel with a serrated stud style, this lug stud ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eLength: 2.375 inches overall with 2.345 inches thread length\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 SAE with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.730 inches with serrated style for firm grip\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.937 inches for proper fitment\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-073 wheel lug stud is designed specifically for use on Chevrolet C20 Suburban models. Its SAE thread size of 1\/2-20 and clockwise thread direction match factory specifications, ensuring compatibility and ease of installation. The serrated stud style provides enhanced grip between the stud and wheel, reducing the risk of loosening under normal driving conditions. With a splined bore diameter of 0.56 inches, this stud fits securely into the hub assembly.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs on Chevrolet C20 Suburban\u003c\/li\u003e\n\u003cli\u003eFixing stripped or damaged threads that compromise wheel security\u003c\/li\u003e\n\u003cli\u003eAddressing loose or vibrating wheels due to faulty studs\u003c\/li\u003e\n\u003cli\u003eUpgrading to durable steel studs for improved longevity\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment and torque retention for wheel assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-073 wheel lug stud, ensure the hub and wheel surfaces are clean and free of debris. Use the correct torque specifications for the Chevrolet C20 Suburban to avoid over-tightening or under-tightening. The serrated stud style requires pressing the stud into the hub with appropriate tools to engage the splines securely. Avoid using impact tools directly on the stud threads to prevent damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-073 part number offers durability and corrosion resistance suitable for automotive applications. While specific warranty details may vary, Dorman products typically come with a limited warranty against defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017279893685,"sku":"BKKZ-610-073","price":32.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610073_Fro.jpg?v=1775009131"},{"product_id":"dorman-610-074-wheel-lug-stud","title":"Dorman 610-074 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chevrolet C20 Suburban\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-074 wheel lug stud is engineered to provide reliable performance and secure wheel attachment for your Chevrolet C20 Suburban. Crafted from steel with precise SAE threading, this lug stud ensures a proper fit and long-lasting durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eLength: 1.75 inches overall with 1.715 inches thread length\u003c\/li\u003e\n\u003cli\u003eThread Diameter: 0.5 inches with 20 threads per inch (1\/2-20 thread size)\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.735 inches with serrated stud style for secure mounting\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.75 inches for proper wheel alignment\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eCompatible with SAE tools and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-074 wheel lug stud features a serrated stud style designed to prevent loosening under vibration. Its steel material offers strength and resistance to wear, making it suitable for the demands of heavy-duty vehicles like the Chevrolet C20 Suburban. The stud’s 1\/2-20 thread size with 20 threads per inch matches factory specifications, ensuring compatibility with OEM lug nuts. The 0.56-inch splined bore diameter allows for a secure fit into the wheel hub, while the 0.735-inch head diameter provides a stable surface for lug nut engagement.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is specifically compatible with Chevrolet C20 Suburban models, providing a direct replacement for worn or damaged studs. It is ideal for restoring wheel security and maintaining proper wheel alignment on this vehicle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or stripped wheel lug studs\u003c\/li\u003e\n\u003cli\u003eRestores secure wheel mounting on Chevrolet C20 Suburban\u003c\/li\u003e\n\u003cli\u003ePrevents wheel vibration and loosening\u003c\/li\u003e\n\u003cli\u003eSupports safe driving by maintaining wheel integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-074 wheel lug stud, ensure the wheel hub is clean and free of debris. Use appropriate SAE tools to thread the stud clockwise into the hub. Torque lug nuts to manufacturer specifications to avoid over-tightening or damage. It is recommended to replace all wheel lug studs on the axle to maintain uniform performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel with precise threading, the 610-074 part number undergoes quality control to ensure reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017281335477,"sku":"BKKZ-610-074","price":37.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610074_Fro.jpg?v=1775009131"},{"product_id":"dorman-610-077-wheel-lug-stud","title":"Dorman 610-077 Wheel Lug Stud - Front","description":"\u003ch2\u003eReliable Wheel Lug Stud for Ford F-350\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-077 wheel lug stud is engineered to provide secure wheel attachment for Ford F-350 trucks. Crafted from durable steel, this serrated stud with clip head ensures a reliable fit and long-lasting performance for your vehicle's wheel assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise\u003c\/li\u003e\n\u003cli\u003eLength: 2.125 inches overall\u003c\/li\u003e\n\u003cli\u003eThread Diameter: 0.625 inches (5\/8-18 thread size)\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.657 inches\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.910 inches\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud with clip head for secure mounting\u003c\/li\u003e\n\u003cli\u003eThread Length: 2.085 inches\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.813 inches\u003c\/li\u003e\n\u003cli\u003ePackage Contents: 10 studs per pack\u003c\/li\u003e\n\u003cli\u003eThread Standard: SAE\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Design and Precise Specifications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-077 wheel lug stud is designed specifically for Ford F-350 models, ensuring compatibility and proper fitment. Its serrated style with a clip head provides a secure grip in the wheel hub, preventing loosening under heavy-duty conditions. The steel material offers strength and resistance to wear, while the 5\/8-18 thread size and 18 threads per inch match factory specifications for reliable installation. The stud’s dimensions, including a 2.125-inch length and 0.910-inch head diameter, align with OEM requirements to maintain wheel integrity and safety.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Common Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs on Ford F-350 trucks\u003c\/li\u003e\n\u003cli\u003eRestoring secure wheel attachment after corrosion or impact damage\u003c\/li\u003e\n\u003cli\u003eMaintaining proper wheel alignment and safety during heavy towing or hauling\u003c\/li\u003e\n\u003cli\u003eAddressing stripped or damaged threads on existing studs\u003c\/li\u003e\n\u003cli\u003eEnsuring reliable wheel fastening for off-road or commercial use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-077 wheel lug stud, ensure the wheel hub is clean and free of debris. Use appropriate tools to press or hammer the stud into the hub carefully, avoiding damage to the splined bore. Tighten lug nuts to manufacturer torque specifications to prevent loosening. It is recommended to replace all studs on the wheel hub simultaneously for balanced performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. The 610-077 part number undergoes rigorous quality control to ensure durability and performance on Ford F-350 vehicles. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in your purchase.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017282154677,"sku":"BKKZ-610-077","price":50.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610077_Fro.jpg?v=1775009132"},{"product_id":"dorman-610-080-wheel-lug-stud","title":"Dorman 610-080 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Buick LeSabre and Riviera\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-080 wheel lug stud is engineered to provide reliable wheel fastening for select Buick models. Designed specifically for the Buick LeSabre and Riviera, this steel serrated stud ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size and 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eThread length of 2.105 inches and overall stud length of 1.938 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a head diameter of 0.860 inches for secure fitment\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for complete replacement needs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-080 wheel lug stud features a SAE thread size of 1\/2-20 with 20 threads per inch, designed to match factory specifications for Buick LeSabre and Riviera models. The stud length measures 1.938 inches with a thread length of 2.105 inches, providing the proper engagement for wheel mounting. Its serrated style head with a diameter of 0.860 inches helps prevent loosening by gripping the wheel securely. The splined bore diameter is 0.625 inches, and the shoulder length is 0.313 inches, ensuring precise fitment and alignment during installation.\u003c\/p\u003e\u003ch2\u003eCompatible Buick Models and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with the following Buick vehicles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuick LeSabre\u003c\/li\u003e\n\u003cli\u003eBuick Riviera\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the Dorman 610-080 studs when replacing worn or damaged wheel lug studs on these models to maintain proper wheel security and safety.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Wheel Lug Stud\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of stripped or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixing loose or missing wheel studs causing wheel instability\u003c\/li\u003e\n\u003cli\u003eRestoring proper wheel alignment and secure fastening\u003c\/li\u003e\n\u003cli\u003eAddressing corrosion or wear that compromises stud integrity\u003c\/li\u003e\n\u003cli\u003eEnsuring safe wheel mounting after brake or suspension repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-080 wheel lug studs, ensure the vehicle is securely lifted and the wheel hub is clean and free of debris. Use the correct torque specifications for your Buick LeSabre or Riviera to avoid over-tightening or under-tightening the studs. It is recommended to replace all wheel lug studs on the axle to maintain even wear and consistent performance. Verify thread direction and size before installation to ensure compatibility.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-080 part offers durability and resistance to wear. While specific warranty details may vary, Dorman typically provides a limited warranty covering defects in material and workmanship. Consult product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017282777269,"sku":"BKKZ-610-080","price":30.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610080_Fro.jpg?v=1775009132"},{"product_id":"dorman-610-083-wheel-lug-stud","title":"Dorman 610-083 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Dodge Dart and Lancer\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-083 wheel lug stud is engineered to provide reliable fastening for your Dodge Dart or Lancer. Made from high-quality steel, this serrated stud ensures a secure fit and long-lasting performance for your vehicle's wheels.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 7\/16-20 thread size\u003c\/li\u003e\n\u003cli\u003e1.25 inch overall length with 1.26 inch thread length\u003c\/li\u003e\n\u003cli\u003eSerrated stud style for enhanced grip and stability\u003c\/li\u003e\n\u003cli\u003eFits Dodge Dart and Lancer models requiring SAE specifications\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for multiple replacements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications of Dorman 610-083 Wheel Lug Stud\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud features a 0.437 inch thread diameter and a 0.563 inch splined bore diameter, designed to match factory specifications for proper fitment. The head diameter measures 0.735 inches, while the shoulder length is 0.531 inches, ensuring compatibility with the wheel and hub assembly. The stud’s serrated style helps prevent loosening under vibration, maintaining wheel security during operation. Thread pitch is 20 threads per inch, consistent with SAE standards, and the clockwise thread direction aligns with typical automotive lug stud requirements.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-083 wheel lug stud is specifically compatible with Dodge Dart and Dodge Lancer models. It is ideal for replacing worn or damaged studs to restore wheel mounting integrity. This part is suitable for owners seeking a direct-fit replacement that meets original equipment specifications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or stripped wheel lug studs\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel mounting and alignment\u003c\/li\u003e\n\u003cli\u003ePrevents wheel vibration and loosening\u003c\/li\u003e\n\u003cli\u003eSupports safe tire and wheel installation\u003c\/li\u003e\n\u003cli\u003eMaintains factory SAE thread standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-083 wheel lug stud, ensure the hub and wheel surfaces are clean and free of debris. Use appropriate tools to press or hammer the stud into the hub carefully, avoiding damage to the threads or splines. Torque lug nuts to manufacturer specifications to maintain proper clamping force. It is recommended to replace all wheel lug studs on the same axle to ensure uniform performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-strength steel, these studs provide reliable durability under normal driving conditions. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship. Refer to product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017283367093,"sku":"BKKZ-610-083","price":32.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610083_Fro.jpg?v=1775009132"},{"product_id":"dorman-610-085-wheel-lug-stud","title":"Dorman 610-085 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Ford and Mercury Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-085 wheel lug stud is engineered to provide reliable fastening for a range of Ford and Mercury models. Crafted from steel with a serrated stud style, this part ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eLength: 1.563 inches overall with 1.55 inches thread length\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.780 inches for proper fitment\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.641 inches for secure mounting\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.313 inches to match OEM specifications\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud for enhanced grip\u003c\/li\u003e\n\u003cli\u003ePackage Contents: 10 studs per set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-085 wheel lug stud is designed to meet SAE standards with a 1\/2-20 thread size and 20 threads per inch, making it compatible with many classic and modern Ford and Mercury vehicles. Its serrated stud style helps prevent loosening under vibration, while the steel material offers durability and resistance to wear. The stud’s dimensions, including a 0.780 inch head diameter and 0.641 inch splined bore diameter, ensure a precise fit for models such as the Ford Mustang, Thunderbird, Econoline series, and Mercury Cougar.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with the following Ford and Mercury models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Mustang\u003c\/li\u003e\n\u003cli\u003eFord Thunderbird\u003c\/li\u003e\n\u003cli\u003eFord Econoline and E-100 Econoline\u003c\/li\u003e\n\u003cli\u003eFord Capri\u003c\/li\u003e\n\u003cli\u003eFord Pinto\u003c\/li\u003e\n\u003cli\u003eFord LTD\u003c\/li\u003e\n\u003cli\u003eMercury Cougar\u003c\/li\u003e\n\u003cli\u003eMercury Marquis\u003c\/li\u003e\n\u003cli\u003eMercury Montego\u003c\/li\u003e\n\u003cli\u003eMercury Marauder\u003c\/li\u003e\n\u003cli\u003eMercury Colony Park\u003c\/li\u003e\n\u003cli\u003eMercury Villager\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by This Wheel Lug Stud\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel studs\u003c\/li\u003e\n\u003cli\u003eFixing loose or stripped threads causing wheel instability\u003c\/li\u003e\n\u003cli\u003eRestoring proper wheel alignment and secure fitment\u003c\/li\u003e\n\u003cli\u003eAddressing corrosion or rust on original studs\u003c\/li\u003e\n\u003cli\u003eEnsuring safe wheel mounting after brake or suspension repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-085 wheel lug studs, ensure the vehicle is securely lifted and the wheel hub is clean and free of debris. Use the correct torque specifications for your specific Ford or Mercury model to avoid over-tightening. The serrated stud design requires proper seating to engage the hub securely. It is recommended to replace all studs on the wheel hub to maintain even clamping force and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel, the 610-085 part number undergoes quality inspections to ensure reliable performance. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017283858613,"sku":"BKKZ-610-085","price":31.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610085_Fro_6ac410b0-bba1-45fa-be47-c4236d7dc896.jpg?v=1775009133"},{"product_id":"dorman-610-092-wheel-lug-stud","title":"Dorman 610-092 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Pontiac Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-092 wheel lug stud is engineered to provide reliable performance for select Pontiac models. Designed with precision steel construction and a serrated stud style, this lug stud ensures secure wheel attachment for vehicles like the Pontiac Bonneville, Catalina, and Grand Prix.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size and 20 threads per inch\u003c\/li\u003e\n\u003cli\u003e1.313 inch overall length with 1.819 inch thread length for proper fitment\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.78 inch head diameter for secure wheel mounting\u003c\/li\u003e\n\u003cli\u003eCompatible with Pontiac Bonneville, Catalina, Grand Prix, Laurentian, LeMans, Parisienne, and Tempest models\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for multiple replacements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-092 wheel lug stud features SAE threading with a 0.5 inch thread diameter and a splined bore diameter of 0.624 inches. The shoulder length measures 0.313 inches, providing the correct seating depth for compatible Pontiac wheels. This serrated stud style is designed to resist loosening under vibration, maintaining wheel security during operation. The clockwise thread direction matches factory specifications for the listed Pontiac models, ensuring proper installation and performance.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Resolution\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is intended for use in replacing worn, damaged, or stripped studs on Pontiac vehicles. It addresses common issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLoose or stripped wheel studs causing wheel instability\u003c\/li\u003e\n\u003cli\u003eCorroded or rusted studs compromising wheel attachment\u003c\/li\u003e\n\u003cli\u003eBroken or bent studs from impact or wear\u003c\/li\u003e\n\u003cli\u003eDifficulty securing lug nuts due to damaged threads\u003c\/li\u003e\n\u003cli\u003eMaintaining factory fitment and safety standards on Pontiac Bonneville, Catalina, and Grand Prix models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-092 wheel lug stud, ensure the wheel hub is clean and free of debris. Use appropriate tools to press or hammer the stud into the hub carefully, avoiding damage to the threads or splined bore. Torque lug nuts to manufacturer specifications to prevent over-tightening or loosening. It is recommended to replace all wheel studs on the axle to maintain balanced wheel security.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-092 part number undergoes rigorous quality control to ensure durability and reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in your purchase.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017284579509,"sku":"BKKZ-610-092","price":31.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610092_Fro.jpg?v=1775009133"},{"product_id":"dorman-610-095-wheel-lug-stud","title":"Dorman 610-095 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Oldsmobile 98 and Delta 88\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-095 wheel lug stud is engineered to provide reliable fastening for your Oldsmobile 98 and Delta 88 models. Crafted from steel with a serrated stud style, this part ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eLength: 1.406 inches overall with 1.405 inches thread length\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.755 inches for proper fitment\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.623 inches for secure mounting\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.563 inches to match OEM specifications\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud for enhanced grip\u003c\/li\u003e\n\u003cli\u003ePackage Contents: 10 studs per set\u003c\/li\u003e\n\u003cli\u003eThread Standard: SAE\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Dorman wheel lug stud, part number 610-095, is designed specifically for Oldsmobile vehicles, including the 98 and Delta 88 models. The serrated stud style helps prevent loosening by providing a firm grip between the wheel and hub. The steel material offers durability and resistance to wear, while the precise thread size and pitch ensure compatibility with factory lug nuts. The 1.406-inch length and 0.755-inch head diameter align with OEM requirements, making this stud a direct replacement for your vehicle’s wheel hardware.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixing stripped or broken threads on existing studs\u003c\/li\u003e\n\u003cli\u003eResolving wheel vibration caused by loose or faulty studs\u003c\/li\u003e\n\u003cli\u003eEnsuring proper wheel alignment and secure fastening\u003c\/li\u003e\n\u003cli\u003eMaintaining safety and performance on Oldsmobile 98 and Delta 88 wheels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-095 wheel lug studs, ensure the hub and wheel surfaces are clean and free of debris. Use the correct torque specifications for your Oldsmobile 98 or Delta 88 to avoid over-tightening or under-tightening. The clockwise thread direction is standard, so install accordingly. It is recommended to replace all studs on the wheel to maintain even clamping force and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel with precise threading, these studs provide reliable performance for your Oldsmobile 98 and Delta 88. While specific warranty details may vary, Dorman typically offers a limited warranty against defects in material and workmanship, ensuring confidence in your purchase of part number 610-095.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017284776117,"sku":"BKKZ-610-095","price":40.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610095_Fro.jpg?v=1775009133"},{"product_id":"dorman-610-096-wheel-lug-stud","title":"Dorman 610-096 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eReliable Wheel Lug Stud for Dodge and Oldsmobile Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-096 wheel lug stud is engineered to provide secure wheel attachment for select Dodge and Oldsmobile models, including the Cutlass, Cutlass Supreme, and Dart. Crafted from durable steel, this serrated stud ensures a strong hold and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eLength: 1.438 inches overall with 1.405 inches thread length\u003c\/li\u003e\n\u003cli\u003eThread Size: 7\/16-20 SAE with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.720 inches with serrated style for enhanced grip\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.555 inches for precise fitment\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.531 inches for proper wheel alignment\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Design and Precise Specifications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-096 wheel lug stud is manufactured from steel to withstand the stresses of wheel mounting and road conditions. Its serrated stud style provides a secure grip between the wheel and hub, reducing the risk of loosening over time. The 7\/16-20 SAE thread size with 20 threads per inch matches factory specifications for compatible Dodge and Oldsmobile vehicles. With a total length of 1.438 inches and a thread length of 1.405 inches, this stud fits accurately to maintain wheel integrity and safety.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with various Dodge and Oldsmobile models, specifically the Cutlass, Cutlass Supreme, and Dart. It is designed to replace worn or damaged studs, ensuring proper wheel mounting and vehicle safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplaces stripped or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003ePrevents wheel wobble and vibration\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel alignment and fitment\u003c\/li\u003e\n\u003cli\u003eEnsures secure wheel attachment for safe driving\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to loose or missing studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-096 wheel lug stud, ensure the hub is clean and free of debris. Use the correct tools to press or hammer the stud into place without damaging the threads or splined bore. Tighten lug nuts to manufacturer torque specifications to avoid over-tightening or under-tightening. It is recommended to replace all studs on the wheel hub to maintain uniform performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel with precise threading and dimensions, the 610-096 part number undergoes quality checks to ensure reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017284972725,"sku":"BKKZ-610-096","price":28.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610096_Fro.jpg?v=1775009134"},{"product_id":"dorman-610-103-wheel-lug-stud","title":"Dorman 610-103 Wheel Lug Stud - Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chrysler, Dodge, Jeep, and Plymouth\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-103 wheel lug stud is engineered to provide reliable fastening for a variety of Chrysler, Dodge, Jeep, and Plymouth vehicles. Constructed from steel with a serrated stud style, this lug stud ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eLength: 1.594 inches for proper fitment\u003c\/li\u003e\n\u003cli\u003eThread Diameter: 0.5 inches with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.673 inches for secure mounting\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 SAE standard\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.563 inches to match OEM specifications\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud for enhanced grip and stability\u003c\/li\u003e\n\u003cli\u003ePackage Contents: 10 studs per set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-103 wheel lug stud is designed to meet SAE standards with a 1\/2-20 thread size and 20 threads per inch, making it compatible with a wide range of vehicles. Its serrated stud style helps prevent loosening under vibration, while the 0.673-inch splined bore diameter ensures a tight fit in the hub. This stud is suitable for clockwise thread direction applications and measures 1.594 inches in length with a 0.563-inch shoulder length, matching factory specifications for secure wheel mounting.\u003c\/p\u003e\u003cp\u003eThis part is compatible with numerous Chrysler, Dodge, Jeep, and Plymouth models, including but not limited to the Chrysler 300, Dodge Challenger, Charger, Dakota, Ram 1500 Van, Jeep CJ5, CJ7, and Plymouth Duster. The Dorman 610-103 is ideal for restoring or replacing worn or damaged wheel lug studs on these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of stripped or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eRestoring secure wheel attachment to prevent wheel wobble\u003c\/li\u003e\n\u003cli\u003eAddressing corrosion or wear that compromises stud integrity\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment for Chrysler 300, Dodge Charger, Jeep CJ7, and Plymouth models\u003c\/li\u003e\n\u003cli\u003eMaintaining safe and reliable wheel fastening on older or high-mileage vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-103 wheel lug stud, ensure the hub is clean and free of debris to allow proper seating of the serrated stud. Use a press or appropriate tool to install the stud evenly without damaging the threads. Torque lug nuts to manufacturer specifications to avoid over-tightening, which can damage the stud or wheel. This stud’s clockwise thread direction aligns with standard lug nut installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel with precise threading and serrated design, the 610-103 part number offers reliable performance for compatible Chrysler, Dodge, Jeep, and Plymouth vehicles. While specific warranty details may vary, Dorman typically provides coverage against defects in material and workmanship to ensure customer confidence in their replacement parts.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017285136565,"sku":"BKKZ-610-103","price":29.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610103_Fro.jpg?v=1775009134"},{"product_id":"dorman-610-105-wheel-lug-stud","title":"Dorman 610-105 Wheel Lug Stud - Front","description":"\u003ch2\u003eReliable Steel Wheel Lug Stud for Buick, Oldsmobile, and Pontiac\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-105 wheel lug stud is engineered to provide secure wheel attachment for select Buick, Oldsmobile, and Pontiac models. Crafted from durable steel, this serrated stud ensures a reliable fit and long-lasting performance for vehicles like the Cutlass, Firebird, and Grand Prix.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 7\/16-20 thread size\u003c\/li\u003e\n\u003cli\u003eThread length of 1.485 inches and overall length of 1.531 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.725 inch head diameter for secure mounting\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-105 wheel lug stud features a 7\/16-20 SAE thread size with 20 threads per inch, designed for precise fitment on compatible vehicles. The stud has a thread diameter of 0.437 inches and a splined bore diameter of 0.558 inches, ensuring a tight and secure connection. The shoulder length measures 0.656 inches, providing proper seating and alignment. This serrated stud style enhances grip between the stud and wheel, reducing the risk of loosening under normal driving conditions.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with various Buick, Oldsmobile, and Pontiac models, including the Cutlass, Cutlass Supreme, Firebird, Grand Prix, GTO, LeMans, Skylark, and Tempest. The Dorman 610-105 is designed to meet the specifications required for these vehicles, making it a suitable replacement part for maintenance or repair.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel mounting security\u003c\/li\u003e\n\u003cli\u003ePrevents wheel vibration caused by loose studs\u003c\/li\u003e\n\u003cli\u003eAddresses stripped or damaged threads on existing studs\u003c\/li\u003e\n\u003cli\u003eEnsures safe and stable wheel installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-105 wheel lug stud, ensure the vehicle is securely lifted and the wheel hub is clean and free of debris. Use appropriate tools to press or hammer the stud into the hub carefully, avoiding damage to the threads. Torque the lug nuts to the manufacturer’s specifications to maintain proper clamping force. It is recommended to replace all wheel lug studs on the axle to ensure uniform performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-105 part number undergoes rigorous quality control to ensure durability and reliability. While specific warranty details may vary, Dorman typically offers a limited warranty against defects in material and workmanship, providing confidence in the product’s performance.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017287954613,"sku":"BKKZ-610-105","price":29.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610105_Fro.jpg?v=1775009134"},{"product_id":"dorman-610-106-wheel-lug-stud","title":"Dorman 610-106 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Buick LeSabre\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-106 wheel lug stud is engineered to provide reliable performance and secure wheel attachment for your Buick LeSabre. Crafted from high-quality steel, this serrated stud ensures a strong grip and long-lasting durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel construction for strength and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eLength: 1.813 inches overall with 1.705 inches thread length\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 SAE with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.750 inches with serrated style for secure fit\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.62 inches for precise mounting\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.813 inches for proper wheel alignment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-106 wheel lug stud is designed specifically for use on Buick LeSabre models, ensuring compatibility and proper fitment. The stud features a serrated style head that helps prevent loosening under vibration, while the steel material offers durability against wear and corrosion. With a thread diameter of 0.5 inches and a thread pitch of 20 threads per inch, this SAE-standard stud is suitable for vehicles requiring a 1\/2-20 thread size. The overall length of 1.813 inches and shoulder length of 0.813 inches provide the correct engagement depth for secure wheel mounting.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Common Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs on Buick LeSabre\u003c\/li\u003e\n\u003cli\u003eRestoring proper wheel fitment and safety\u003c\/li\u003e\n\u003cli\u003eAddressing issues with loose or stripped lug studs\u003c\/li\u003e\n\u003cli\u003eEnsuring secure wheel attachment after brake or suspension service\u003c\/li\u003e\n\u003cli\u003ePreventing wheel vibration caused by faulty studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-106 wheel lug studs, ensure the vehicle is safely lifted and supported. Remove the wheel and brake components as necessary to access the lug studs. Clean the mounting surface and inspect the hub for damage before installation. Use a proper press or hammer tool designed for lug stud installation to avoid damaging the threads or splines. Tighten lug nuts to the manufacturer’s recommended torque specifications to maintain safety and performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM specifications, providing reliable performance and fitment. Made from high-grade steel, these studs resist corrosion and wear under normal operating conditions. The Dorman 610-106 part is backed by a limited warranty against defects in material and workmanship, ensuring confidence in your replacement part.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017288020149,"sku":"BKKZ-610-106","price":34.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610106_Fro.jpg?v=1775009134"},{"product_id":"dorman-610-109-wheel-lug-stud","title":"Dorman 610-109 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Ford and Jeep Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-109 wheel lug stud is engineered to provide reliable wheel fastening for a range of Ford, Jeep, Lincoln, and Mercury models. Crafted from steel with precise SAE threading, this stud ensures secure wheel attachment and long-lasting performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel material for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size and 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eLength of 1.625 inches with a thread length of 1.595 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style without clip head for secure fitment\u003c\/li\u003e\n\u003cli\u003eFits popular models including Ford F-150, Jeep Wrangler, Lincoln Continental, and Mercury Cougar\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for multiple replacements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-109 wheel lug stud features a 0.5-inch thread diameter and a 0.625-inch splined bore diameter, designed to meet SAE standards. The head diameter measures 0.795 inches, and the shoulder length is 0.563 inches, providing a precise fit for wheel hubs. This serrated stud style without a clip head is compatible with clockwise thread direction applications, making it suitable for various tire and wheel hardware needs.\u003c\/p\u003e\u003cp\u003eCompatible with Ford models such as the F-100, F-150, Mustang, and Econoline series, as well as Jeep models including the Cherokee, Grand Cherokee, Wrangler, and CJ5\/CJ7. It also fits Lincoln vehicles like the Continental and Mercury models including the Cougar and Marquis.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs to maintain wheel security\u003c\/li\u003e\n\u003cli\u003eFixing stripped or broken threads on existing studs\u003c\/li\u003e\n\u003cli\u003eEnsuring proper wheel alignment and balance by using correct stud specifications\u003c\/li\u003e\n\u003cli\u003eAddressing issues with loose or vibrating wheels due to faulty studs\u003c\/li\u003e\n\u003cli\u003eUpgrading to OEM-quality studs for reliable wheel fastening\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-109 wheel lug studs, ensure the wheel hub is clean and free of debris. Use the correct torque specifications recommended by the vehicle manufacturer to avoid over-tightening or under-tightening. The serrated stud design helps prevent loosening, but periodic inspection is advised. This part is designed for SAE thread standards and clockwise thread direction, so verify compatibility before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM specifications, providing dependable performance for your vehicle. The 610-109 part number undergoes rigorous quality control to ensure durability and fitment accuracy. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017288216757,"sku":"BKKZ-610-109","price":30.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610109_Fro_d52c26f5-a0aa-4bc9-bcc5-bceb9416d8ce.jpg?v=1775009135"},{"product_id":"dorman-610-114-wheel-lug-stud","title":"Dorman 610-114 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Pontiac Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-114 wheel lug stud is engineered to provide reliable performance for select Pontiac models. Designed with precision steel construction and a serrated stud style, this part ensures secure wheel attachment for vehicles like the Pontiac Firebird, Grand Prix, GTO, LeMans, and Tempest.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 7\/16-20 thread size\u003c\/li\u003e\n\u003cli\u003eThread length of 1.685 inches and overall length of 1.656 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style for enhanced grip and fit\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eCompatible with SAE thread standards\u003c\/li\u003e\n\u003cli\u003eHead diameter measures 0.725 inches for proper fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-114 wheel lug stud features a 0.437-inch thread diameter and a splined bore diameter of 0.582 inches, designed to match factory specifications for select Pontiac models. The serrated stud style improves the stud's grip within the wheel hub, reducing the risk of loosening under normal driving conditions. With a shoulder length of 0.406 inches, this stud provides the correct seating depth for secure wheel mounting. The clockwise thread direction and 20 threads per inch ensure compatibility with standard lug nuts used on Pontiac Firebird, Grand Prix, GTO, LeMans, and Tempest vehicles.\u003c\/p\u003e\u003ch2\u003eCompatible Pontiac Models and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is specifically compatible with the following Pontiac models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePontiac Firebird\u003c\/li\u003e\n\u003cli\u003ePontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003ePontiac GTO\u003c\/li\u003e\n\u003cli\u003ePontiac LeMans\u003c\/li\u003e\n\u003cli\u003ePontiac Tempest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUsing the Dorman 610-114 ensures proper fitment and reliable wheel attachment for these vehicles, maintaining safety and performance standards.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Wheel Lug Stud\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixing stripped or damaged threads on existing studs\u003c\/li\u003e\n\u003cli\u003eResolving wheel vibration caused by loose or faulty studs\u003c\/li\u003e\n\u003cli\u003eEnsuring secure wheel mounting after wheel or brake service\u003c\/li\u003e\n\u003cli\u003ePreventing wheel detachment due to compromised lug hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-114 wheel lug stud, ensure the hub and wheel surfaces are clean and free of debris. Use the correct torque specifications recommended by the vehicle manufacturer to avoid over-tightening or under-tightening. The serrated stud style requires proper seating to engage the hub securely. It is advisable to replace all wheel lug studs on the axle to maintain uniform performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel, the 610-114 part number undergoes rigorous quality control to ensure consistent performance. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in the product's reliability.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017288282293,"sku":"BKKZ-610-114","price":31.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610114_Fro_14f02120-6e24-4f8a-8480-bfcd125fbdfb.jpg?v=1775009135"},{"product_id":"dorman-610-120-wheel-lug-stud","title":"Dorman 610-120 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chrysler and Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-120 wheel lug stud is engineered to provide reliable wheel fastening for select Chrysler and Dodge models. Crafted from steel with a serrated stud style, this lug stud ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eLength: 1.5 inches overall with 1.425 inches thread length\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.815 inches for proper fitment\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.65 inches for secure mounting\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.5 inches serrated style for enhanced grip\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eSAE thread standard compatible with specified vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-120 wheel lug stud is designed specifically for Chrysler and Dodge vehicles including the 300, Monaco, Newport, New Yorker, and Town \u0026amp; Country models. Its steel construction offers durability and resistance to wear, while the serrated stud style provides a firm grip to prevent loosening under normal driving conditions. The 1\/2-20 thread size and 20 threads per inch ensure compatibility with factory lug nuts and wheel assemblies. With a total length of 1.5 inches and a thread length of 1.425 inches, this stud fits securely within the wheel hub assembly.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixes issues with loose or stripped threads on existing studs\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel alignment and secure fastening\u003c\/li\u003e\n\u003cli\u003ePrevents wheel vibration caused by faulty studs\u003c\/li\u003e\n\u003cli\u003eEnsures safe wheel mounting on Chrysler 300 and Dodge Town \u0026amp; Country\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUse appropriate torque specifications for Chrysler and Dodge models\u003c\/li\u003e\n\u003cli\u003eInspect wheel hub and lug nut condition before installation\u003c\/li\u003e\n\u003cli\u003eApply anti-seize compound if recommended by vehicle manufacturer\u003c\/li\u003e\n\u003cli\u003eReplace studs in sets to maintain even wear and performance\u003c\/li\u003e\n\u003cli\u003eVerify thread direction and size match before installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM specifications for fit, form, and function. The 610-120 part number undergoes rigorous quality control to ensure durability and reliable performance. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in product longevity.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017288380597,"sku":"BKKZ-610-120","price":37.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610120_Fro.jpg?v=1775009135"},{"product_id":"dorman-610-122-wheel-lug-stud","title":"Dorman 610-122 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chrysler and Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-122 wheel lug stud is engineered to provide reliable wheel fastening for select Chrysler and Dodge models. Crafted from steel with a serrated stud style, this part ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003ch2\u003eKey Features of Dorman 610-122 Wheel Lug Stud\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction for durability\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 SAE with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eLength: 1.563 inches overall with 1.535 inches thread length\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.805 inches for proper fitment\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.65 inches for secure mounting\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud design to prevent loosening\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes 10 wheel lug studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Dorman 610-122 Wheel Lug Stud\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is designed specifically for use on Chrysler and Dodge vehicles including models such as the 300, Challenger, Charger, Monaco, Newport, New Yorker, and Town \u0026amp; Country. The steel material provides strength and resistance to wear, while the serrated stud style helps maintain a secure grip between the wheel and hub assembly. The 1\/2-20 SAE thread size with 20 threads per inch matches factory specifications, ensuring compatibility and ease of installation. With a total length of 1.563 inches and a shoulder length of 0.625 inches, this stud fits precisely to maintain proper wheel alignment and safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs on Chrysler 300 and Dodge Charger\u003c\/li\u003e\n\u003cli\u003eFixing stripped or broken threads that compromise wheel security\u003c\/li\u003e\n\u003cli\u003eResolving wheel vibration caused by loose or faulty studs\u003c\/li\u003e\n\u003cli\u003eUpgrading to durable steel studs for improved longevity\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment on Dodge Challenger and Town \u0026amp; Country models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify thread size and length compatibility with your vehicle before installation\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications to avoid over-tightening or under-tightening\u003c\/li\u003e\n\u003cli\u003eInspect wheel hub and nut condition during replacement to ensure optimal fit\u003c\/li\u003e\n\u003cli\u003eReplace all studs on the wheel hub if multiple studs show wear or damage\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. The 610-122 part number undergoes rigorous quality control to ensure durability and reliable performance on Chrysler and Dodge vehicles. While specific warranty details may vary, Dorman typically offers a limited warranty against defects in material and workmanship, providing confidence in the product's longevity and safety.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017289461941,"sku":"BKKZ-610-122","price":43.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610122_Fro.jpg?v=1775009136"},{"product_id":"dorman-610-126-wheel-lug-stud","title":"Dorman 610-126 Wheel Lug Stud - Front","description":"\u003ch2\u003eReliable Dorman Wheel Lug Stud for Chevrolet and Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-126 wheel lug stud is engineered to provide secure wheel attachment for select Chevrolet, Chrysler, Dodge, and GMC models. Crafted from durable steel with a serrated stud style, this part ensures a reliable fit and long-lasting performance for your vehicle's wheel assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size and 20 threads per inch\u003c\/li\u003e\n\u003cli\u003e1.5-inch overall length with 1.465-inch thread length\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.770-inch head diameter for secure mounting\u003c\/li\u003e\n\u003cli\u003eCompatible with Chevrolet 300, GMC Safari, Dodge Monaco, Chrysler Town \u0026amp; Country, and other models\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for complete replacement needs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Design Details\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-126 wheel lug stud features a SAE thread size of 1\/2-20 with a clockwise thread direction, designed to match factory specifications for a precise fit. The stud measures 1.5 inches in length, with a thread length of 1.465 inches and a shoulder length of 0.375 inches, ensuring proper engagement with the wheel and hub. The serrated stud style enhances grip and prevents loosening under vibration. The splined bore diameter is 0.625 inches, allowing for secure installation into the hub assembly. This part is made from steel to withstand the stresses of wheel mounting and road conditions.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with a range of vehicles including Chevrolet 300, GMC Safari, Dodge Monaco, Chrysler Town \u0026amp; Country, and other models such as the Chrysler 300, Dodge Astro, Imperial, Newport, and New Yorker. The Dorman 610-126 is designed to meet the specifications required for these vehicles, making it a suitable replacement part for wheel hardware maintenance and repair.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Wheel Lug Stud\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel studs to restore wheel security\u003c\/li\u003e\n\u003cli\u003eFixing stripped or damaged threads that prevent proper lug nut tightening\u003c\/li\u003e\n\u003cli\u003eResolving wheel vibration caused by loose or faulty studs\u003c\/li\u003e\n\u003cli\u003eAddressing corrosion or rust that compromises stud integrity\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment for wheel alignment and safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-126 wheel lug stud, ensure the hub assembly is clean and free of debris. Use the correct tools to press or hammer the stud into place without damaging the splined bore. Torque lug nuts to manufacturer specifications to avoid over-tightening or under-tightening. It is recommended to replace all wheel studs on the same axle to maintain even clamping force and wheel balance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-126 part number undergoes rigorous quality control to ensure durability and reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in your purchase.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017289593013,"sku":"BKKZ-610-126","price":34.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610126_Fro_8c75e2fd-5a88-44b0-aa22-0d5ee5a8f002.jpg?v=1775009136"},{"product_id":"dorman-610-130-wheel-lug-stud","title":"Dorman 610-130 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Dodge Dart\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-130 wheel lug stud is engineered to provide reliable performance for your Dodge Dart. Crafted from steel with a serrated stud style, this lug stud ensures secure wheel attachment and long-lasting durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eLength: 1.969 inches overall with 1.935 inches thread length\u003c\/li\u003e\n\u003cli\u003eThread Size: 7\/16-20 SAE with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.785 inches for proper fitment\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.565 inches for secure mounting\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 1.063 inches to match OEM specifications\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud for enhanced grip and stability\u003c\/li\u003e\n\u003cli\u003ePackage Contents: 10 studs per set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-130 wheel lug stud is designed specifically for Dodge Dart models requiring a 7\/16-20 thread size with a clockwise thread direction. The serrated stud style helps prevent loosening by providing a firm grip between the wheel and hub assembly. With a total length of 1.969 inches and a thread length of 1.935 inches, this stud meets precise OEM dimensions to ensure proper fit and function. The steel material offers strength and resistance to wear, making it suitable for regular driving conditions and wheel maintenance.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with Dodge Dart vehicles that require a 7\/16-20 SAE thread size and serrated stud style. It is ideal for replacing worn or damaged lug studs to maintain wheel security and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement for stripped or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixes loose or vibrating wheels caused by worn studs\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel alignment and fitment\u003c\/li\u003e\n\u003cli\u003ePrevents wheel detachment due to faulty hardware\u003c\/li\u003e\n\u003cli\u003eSupports safe tire and wheel installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-130 wheel lug stud, ensure the vehicle is securely lifted and the wheel is removed. Use appropriate tools to remove the old stud and press the new stud into the hub carefully, aligning the serrations for a tight fit. Torque the lug nuts to manufacturer specifications to avoid over-tightening or under-tightening, which can affect wheel safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel with precise threading and dimensions, the 610-130 part number undergoes quality checks to ensure reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017289691317,"sku":"BKKZ-610-130","price":41.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610130_Fro.jpg?v=1775009136"},{"product_id":"dorman-610-132-wheel-lug-stud","title":"Dorman 610-132 Wheel Lug Stud - Front","description":"\u003ch2\u003eOverview of Dorman 610-132 Wheel Lug Stud\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-132 wheel lug stud is engineered for reliable performance on select Chrysler and Dodge vehicles. Crafted from durable steel, this serrated stud ensures secure wheel attachment for models like the Dodge Charger and Chrysler 300.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size\u003c\/li\u003e\n\u003cli\u003eThread length of 1.615 inches and overall length of 1.625 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.785 inch head diameter\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eCompatible with SAE thread standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-132 wheel lug stud is designed to meet OEM specifications for a secure and precise fit. Its serrated stud style provides enhanced grip between the wheel and hub, reducing the risk of loosening under normal driving conditions. The stud features a 0.5 inch thread diameter and 20 threads per inch, matching the SAE 1\/2-20 thread size standard. With a shoulder length of 0.688 inches and a splined bore diameter of 0.65 inches, this stud is engineered for proper alignment and fitment on compatible Chrysler and Dodge vehicles including the Dodge Challenger, Monaco, and Town \u0026amp; Country.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChrysler 300\u003c\/li\u003e\n\u003cli\u003eDodge Challenger\u003c\/li\u003e\n\u003cli\u003eDodge Charger\u003c\/li\u003e\n\u003cli\u003eChrysler Monaco\u003c\/li\u003e\n\u003cli\u003eChrysler Newport\u003c\/li\u003e\n\u003cli\u003eChrysler New Yorker\u003c\/li\u003e\n\u003cli\u003eChrysler Town \u0026amp; Country\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis wheel lug stud is ideal for replacing worn or damaged studs to maintain wheel security and vehicle safety.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by Dorman 610-132\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of stripped or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixing loose or wobbly wheels due to worn studs\u003c\/li\u003e\n\u003cli\u003eRestoring proper wheel alignment and fitment\u003c\/li\u003e\n\u003cli\u003ePreventing wheel detachment caused by faulty studs\u003c\/li\u003e\n\u003cli\u003eEnsuring safe and secure wheel installation on Chrysler and Dodge models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-132 wheel lug stud, ensure the hub is clean and free of debris. Use the correct torque specifications recommended by the vehicle manufacturer to avoid over-tightening or under-tightening. The serrated design requires proper seating to engage the hub securely. It is advisable to replace all studs on the wheel to maintain even clamping force and balance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards, providing reliable performance and durability. Made from high-quality steel, the 610-132 part number undergoes rigorous quality control to ensure fit and function. Warranty coverage details can be obtained from the product documentation or manufacturer.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017290313909,"sku":"BKKZ-610-132","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610132_Fro.jpg?v=1775009137"},{"product_id":"dorman-610-134-wheel-lug-stud","title":"Dorman 610-134 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chrysler, Dodge, Pontiac\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-134 wheel lug stud is engineered to provide reliable fastening for select Chrysler, Dodge, and Pontiac vehicles. Crafted from steel with a serrated style, this stud ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 SAE with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eThread Length: 1.665 inches\u003c\/li\u003e\n\u003cli\u003eOverall Length: 1.062 inches\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.785 inches\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud for enhanced grip\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-134 wheel lug stud is designed with a 1\/2-20 SAE thread size and 20 threads per inch, compatible with clockwise thread direction applications. Its serrated stud style improves the grip between the stud and wheel, reducing the risk of loosening under vibration. The stud length measures 1.062 inches with a thread length of 1.665 inches, providing adequate engagement for secure wheel mounting. The head diameter of 0.785 inches ensures proper fitment with compatible lug nuts. Manufactured from durable steel, this stud offers strength and resistance to wear, suitable for demanding automotive environments.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with various Chrysler, Dodge, and Pontiac models, including the Chrysler 300, Dodge Challenger, Charger, and Town \u0026amp; Country, as well as Pontiac Bonneville, Catalina, Grand Prix, Monaco, Newport, and New Yorker. The Dorman 610-134 is ideal for replacing worn or damaged studs to maintain safe wheel attachment on these vehicles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplaces stripped or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003ePrevents wheel wobble and vibration\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel alignment and balance\u003c\/li\u003e\n\u003cli\u003eEnsures secure fastening for safe driving\u003c\/li\u003e\n\u003cli\u003eAddresses corrosion or wear-related failures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-134 wheel lug stud, ensure the vehicle is securely lifted and the wheel is removed. Clean the hub mounting surface before inserting the new stud. Use a proper press or hammer method recommended by the vehicle manufacturer to seat the stud fully. Verify the thread direction is clockwise to match the stud. Torque lug nuts to the vehicle’s specifications to avoid over-tightening or under-tightening, which can affect stud performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-134 part number undergoes rigorous quality control to ensure durability and reliability. While specific warranty terms may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in product performance.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017290510517,"sku":"BKKZ-610-134","price":39.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610134_Fro.jpg?v=1775009137"},{"product_id":"dorman-610-138-wheel-lug-stud","title":"Dorman 610-138 Wheel Lug Stud - Rear","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for GM Trucks and SUVs\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-138 wheel lug stud is engineered to provide reliable wheel fastening for a range of General Motors vehicles. Designed with precision steel construction and a serrated stud style, this part ensures secure wheel attachment for models like Chevrolet Blazer, GMC Jimmy, and Cadillac DeVille.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size\u003c\/li\u003e\n\u003cli\u003e1.531 inch overall length with 1.182 inch thread length\u003c\/li\u003e\n\u003cli\u003eSerrated stud style for enhanced grip and fit\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eCompatible with SAE thread standards\u003c\/li\u003e\n\u003cli\u003eFits multiple GM makes including Buick, Pontiac, and Oldsmobile\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Design Features\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-138 wheel lug stud features a 0.5 inch thread diameter and a 0.687 inch head diameter, optimized for secure wheel mounting. The serrated stud style improves retention by preventing loosening under vibration. With a shoulder length of 0.313 inches and a splined bore diameter of 0.535 inches, this stud is designed to fit precisely in factory hubs. The clockwise thread direction and 20 threads per inch ensure compatibility with original equipment lug nuts. This part meets SAE standards, making it suitable for a variety of GM trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is compatible with a wide range of GM vehicles, including Chevrolet C10, C1500, and Suburban models, GMC Safari and Jimmy, as well as Buick LeSabre and Pontiac Bonneville. It is also suitable for Cadillac Fleetwood, DeVille, and Brougham, along with Oldsmobile Delta 88 and Riviera. The Dorman 610-138 is ideal for owners seeking replacement studs for wheel hardware maintenance or repair on these specific makes and models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eResolves issues with loose or vibrating wheels\u003c\/li\u003e\n\u003cli\u003eRestores proper wheel alignment and safety\u003c\/li\u003e\n\u003cli\u003ePrevents wheel stud breakage during tire changes\u003c\/li\u003e\n\u003cli\u003eEnsures secure mounting for heavy-duty applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-138 wheel lug stud, ensure the hub is clean and free of debris. Use a proper press or installation tool to avoid damaging the stud threads or serrations. Tighten lug nuts to manufacturer torque specifications to maintain secure wheel attachment. It is recommended to replace all wheel studs on the axle to maintain uniform performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM specifications for fit, form, and function. Made from durable steel with precise threading, the 610-138 part number undergoes quality control to ensure reliable performance. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017290772661,"sku":"BKKZ-610-138","price":31.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610138_Fro_1bafb787-ca10-4835-ad5e-4c0dd5978d63.jpg?v=1775009137"},{"product_id":"dorman-610-144-wheel-lug-stud","title":"Dorman 610-144 Wheel Lug Stud - Rear","description":"\u003ch2\u003eReliable Steel Wheel Lug Stud for Automotive Applications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-144 wheel lug stud is engineered from durable steel to provide secure wheel attachment for various vehicle makes and models. Designed with precise SAE thread specifications, this serrated stud ensures a reliable fit and long-lasting performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size\u003c\/li\u003e\n\u003cli\u003eThread length of 2.845 inches and overall length of 2.875 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.725 inch head diameter for secure mounting\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for multiple replacements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Specifications of Dorman 610-144 Wheel Lug Stud\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud features a 0.5 inch thread diameter and 20 threads per inch, conforming to SAE standards for compatibility with many domestic and import vehicles. The serrated stud style enhances grip between the wheel and hub, reducing the risk of loosening under normal driving conditions. With a shoulder length of 1.875 inches and a splined bore diameter of 0.561 inches, the stud is designed to fit securely into the hub assembly. The clockwise thread direction matches the standard tightening pattern used in most automotive wheel applications.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Problem Solving Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs on trucks and passenger vehicles\u003c\/li\u003e\n\u003cli\u003eRestoring proper wheel fitment and alignment to prevent wheel vibration\u003c\/li\u003e\n\u003cli\u003eAddressing stripped or damaged threads that compromise wheel security\u003c\/li\u003e\n\u003cli\u003eUpgrading to serrated studs for improved wheel retention\u003c\/li\u003e\n\u003cli\u003eEnsuring safe and secure wheel mounting after brake or hub repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips for Dorman Wheel Lug Studs\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-144 wheel lug studs, ensure the hub is clean and free of debris to allow proper seating of the serrated shoulder. Use a press or appropriate tool to install the stud evenly without damaging the threads. Torque the lug nuts to the vehicle manufacturer’s specifications to maintain safe wheel attachment. These studs are compatible with vehicles requiring SAE 1\/2-20 threaded lug studs, commonly found on various Ford, Chevrolet, and Dodge models.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-144 part number undergoes rigorous quality control to ensure durability and performance. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in your purchase.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017290838197,"sku":"BKKZ-610-144","price":38.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610144_Fro.jpg?v=1775009137"},{"product_id":"dorman-610-148-wheel-lug-stud","title":"Dorman 610-148 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chrysler and Ford Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-148 wheel lug stud is engineered to provide reliable wheel fastening for a range of Chrysler, Dodge, Ford, Lincoln, Mercury, and Plymouth models. Crafted from steel with a serrated stud style, this lug stud ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from durable steel for strength and longevity\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size and 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eThread length of 1.815 inches and overall length of 1.813 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.795 inch head diameter for secure fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple vehicle models including Ford F-150, Dodge Ramcharger, and Lincoln Continental\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs for comprehensive replacement needs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-148 wheel lug stud features a 0.5 inch thread diameter and a splined bore diameter of 0.622 inches, designed to fit SAE standard applications. The shoulder length measures 0.75 inches, providing proper seating and alignment for wheel installation. This part is compatible with a wide range of vehicles such as the Ford Mustang, Chrysler Town \u0026amp; Country, Dodge B2500, and Mercury Marquis, ensuring versatility across multiple platforms.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Resolution\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud is intended for use in securing wheels on trucks, vans, and passenger cars from the specified makes and models. It addresses common issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWorn or damaged wheel studs causing loose wheels\u003c\/li\u003e\n\u003cli\u003eCorroded or stripped threads affecting wheel security\u003c\/li\u003e\n\u003cli\u003eReplacement during brake or wheel hub maintenance\u003c\/li\u003e\n\u003cli\u003eUpgrading to serrated studs for improved grip and safety\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment on vehicles like the Ford Bronco and Plymouth Duster\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-148 wheel lug stud, ensure the wheel hub is clean and free of debris. Use the correct torque specifications for your vehicle to avoid over-tightening or under-tightening. The serrated stud style helps prevent loosening, but periodic inspection is recommended. This part is designed for SAE thread standards and clockwise thread direction, so verify compatibility before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM specifications, providing reliable performance and durability. While specific warranty details for part number 610-148 are not listed, Dorman typically offers limited warranties covering defects in material and workmanship. For detailed warranty information, consult Dorman's official resources or product documentation.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017290903733,"sku":"BKKZ-610-148","price":34.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610148_Fro.jpg?v=1775009138"},{"product_id":"dorman-610-149-wheel-lug-stud","title":"Dorman 610-149 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Chrysler, Dodge, Ford, and Mercury\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-149 wheel lug stud is engineered to provide reliable wheel fastening for select Chrysler, Dodge, Ford, and Mercury vehicles. Constructed from steel with a serrated stud style, this lug stud ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eLength: 1.938 inches overall, with 1.955 inches thread length\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.855 inches\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.625 inches\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 1 inch\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud for secure fitment\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003cli\u003eSAE thread standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-149 wheel lug stud is designed to meet SAE specifications with a 1\/2-20 thread size and 20 threads per inch, making it compatible with a range of vehicles including Chrysler 300, Dodge Challenger, Charger, and Ramcharger, as well as Ford Mustang and Mercury Cougar models. The serrated stud style enhances grip between the stud and wheel, reducing the risk of loosening under normal driving conditions. With a splined bore diameter of 0.625 inches and a head diameter of 0.855 inches, this stud fits securely into the wheel hub assembly.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs\u003c\/li\u003e\n\u003cli\u003eFixing stripped or damaged threads on existing studs\u003c\/li\u003e\n\u003cli\u003eResolving wheel vibration caused by loose or faulty studs\u003c\/li\u003e\n\u003cli\u003eEnsuring proper wheel alignment and secure fastening\u003c\/li\u003e\n\u003cli\u003eMaintaining safety and performance on Chrysler, Dodge, Ford, and Mercury vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-149 wheel lug studs, ensure the hub surface is clean and free of debris. Use a proper press or installation tool to avoid damaging the stud or hub. Tighten lug nuts to the manufacturer’s recommended torque specifications to maintain secure wheel attachment. Verify thread direction is clockwise before installation to match vehicle requirements.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel, the 610-149 part number offers reliable performance under typical driving conditions. While specific warranty details may vary, Dorman products generally include coverage against defects in material and workmanship to ensure customer confidence.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017291034805,"sku":"BKKZ-610-149","price":33.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610149_Fro_fc0bc33f-dd76-48c2-a4d9-657015854e7a.jpg?v=1775009138"},{"product_id":"dorman-610-153-wheel-lug-stud","title":"Dorman 610-153 Wheel Lug Stud - Front or Rear","description":"\u003ch2\u003eReliable Dorman Wheel Lug Stud for Chevrolet, Ford, Dodge, and Plymouth\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-153 wheel lug stud is engineered to provide secure wheel fastening for select Chevrolet, Ford, Dodge, and Plymouth vehicles. Crafted from durable steel, this serrated stud ensures a reliable fit and long-lasting performance for your wheel assembly needs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size\u003c\/li\u003e\n\u003cli\u003eThread length of 1.065 inches and overall length of 1.688 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style with a 0.74-inch head diameter for secure mounting\u003c\/li\u003e\n\u003cli\u003eCompatible with SAE specifications and includes 10 studs per package\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Specifications of Dorman 610-153 Wheel Lug Stud\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud features a 0.5-inch thread diameter and 20 threads per inch, designed to meet SAE standards. The stud includes a 0.625-inch splined bore diameter and shoulder length, providing a precise fit for wheel hubs. Its serrated style enhances grip and prevents loosening under normal driving conditions. The Dorman 610-153 is suitable for vehicles such as Chevrolet B300, B350, Dodge D200, D250, D300, D350, Ford Mustang, Thunderbird, and Plymouth models including PB350 and W-series trucks.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged wheel lug studs on Chevrolet, Ford, Dodge, and Plymouth vehicles\u003c\/li\u003e\n\u003cli\u003eRestoring proper wheel alignment and secure fastening\u003c\/li\u003e\n\u003cli\u003ePreventing wheel vibration caused by loose or stripped studs\u003c\/li\u003e\n\u003cli\u003eEnsuring safe wheel installation after brake or hub service\u003c\/li\u003e\n\u003cli\u003eAddressing corrosion or thread damage on original studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-153 wheel lug stud, ensure the hub is clean and free of debris. Use the correct tools to press or hammer the stud into place without damaging the threads. Torque lug nuts to manufacturer specifications to maintain proper clamping force. It is recommended to replace all studs on the wheel hub to ensure even wear and consistent performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit and function. Made from high-quality steel, the 610-153 part number undergoes rigorous quality control to ensure durability and reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017292148917,"sku":"BKKZ-610-153","price":30.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610153_Fro_9f45856f-2e5b-4083-a979-f0292b76c04e.jpg?v=1775009138"},{"product_id":"dorman-610-154-wheel-lug-stud","title":"Dorman 610-154 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Pontiac Bonneville and Catalina\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-154 wheel lug stud is engineered to provide reliable fastening for Pontiac Bonneville and Catalina models. Crafted from steel with a serrated stud style, this lug stud ensures secure wheel attachment and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-strength steel construction\u003c\/li\u003e\n\u003cli\u003eThread Direction: Clockwise for standard installation\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2-20 with 20 threads per inch\u003c\/li\u003e\n\u003cli\u003eLength: 1.781 inches overall with 1.765 inches thread length\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 0.765 inches for proper fitment\u003c\/li\u003e\n\u003cli\u003eSplined Bore Diameter: 0.625 inches for secure mounting\u003c\/li\u003e\n\u003cli\u003eShoulder Length: 0.75 inches to match OEM specifications\u003c\/li\u003e\n\u003cli\u003eStyle: Serrated stud for enhanced grip\u003c\/li\u003e\n\u003cli\u003ePackage Contents: 10 studs per set\u003c\/li\u003e\n\u003cli\u003eSAE thread standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-154 wheel lug stud is designed specifically for use on Pontiac Bonneville and Catalina vehicles, ensuring compatibility and proper fit. Made from durable steel, this serrated stud style lug stud offers a secure hold by preventing wheel slippage. The clockwise thread direction and SAE thread size of 1\/2-20 with 20 threads per inch match factory specifications for these models. With an overall length of 1.781 inches and a thread length of 1.765 inches, this stud fits precisely into the wheel hub assembly. The 0.765 inch head diameter and 0.625 inch splined bore diameter provide a tight and reliable connection, while the 0.75 inch shoulder length maintains proper alignment during installation.\u003c\/p\u003e\u003ch2\u003eCompatible Applications and Common Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement wheel lug studs for Pontiac Bonneville and Catalina\u003c\/li\u003e\n\u003cli\u003eRestoring secure wheel attachment after stud damage or wear\u003c\/li\u003e\n\u003cli\u003eAddressing stripped or damaged threads on existing studs\u003c\/li\u003e\n\u003cli\u003eEnsuring proper wheel fitment and safety during tire changes\u003c\/li\u003e\n\u003cli\u003eMaintaining factory specifications for wheel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-154 wheel lug studs, ensure the vehicle is safely lifted and supported. Remove the wheel and brake components as necessary to access the lug studs. Clean the hub mounting surface to remove debris or corrosion before pressing in the new studs. Use a proper press tool or a lug nut and washer method to seat the stud fully without damaging threads. Torque the lug nuts to the manufacturer’s specifications to avoid over-tightening or under-tightening, which can affect wheel security.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from high-quality steel, the 610-154 part number undergoes rigorous quality control to ensure durability and performance. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship to provide confidence in your purchase.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017292214453,"sku":"BKKZ-610-154","price":38.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610154_Fro.jpg?v=1775009139"},{"product_id":"dorman-610-155-wheel-lug-stud","title":"Dorman 610-155 Wheel Lug Stud - Front","description":"\u003ch2\u003eDurable Steel Wheel Lug Stud for Pontiac Vehicles\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-155 wheel lug stud is engineered to provide reliable wheel fastening for select Pontiac models. Designed with precision steel construction and a serrated stud style, this part ensures secure fitment and long-lasting performance for your Pontiac Bonneville, Catalina, and Grand Prix.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-strength steel for durability\u003c\/li\u003e\n\u003cli\u003eClockwise thread direction with 1\/2-20 thread size\u003c\/li\u003e\n\u003cli\u003eThread length of 1.655 inches and overall length of 1.656 inches\u003c\/li\u003e\n\u003cli\u003eSerrated stud style for enhanced grip and secure wheel mounting\u003c\/li\u003e\n\u003cli\u003eCompatible with Pontiac Bonneville, Catalina, and Grand Prix models\u003c\/li\u003e\n\u003cli\u003ePackage includes 10 wheel lug studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications of Dorman 610-155 Wheel Lug Stud\u003c\/h2\u003e\u003cp\u003eThis wheel lug stud features a 0.5-inch thread diameter and a 0.63-inch splined bore diameter, designed to fit SAE standard wheels. The head diameter measures 0.705 inches, and the shoulder length is 0.5 inches, providing a precise fit for the wheel hub assembly. The stud’s serrated style helps prevent loosening under vibration, maintaining wheel security during operation. The thread pitch is 20 threads per inch, matching the 1\/2-20 thread size specification common in Pontiac wheel assemblies.\u003c\/p\u003e\u003ch2\u003eCompatible Pontiac Models and Applications\u003c\/h2\u003e\u003cp\u003eThe Dorman 610-155 wheel lug stud is compatible with various Pontiac vehicles, including the Bonneville, Catalina, and Grand Prix. This part is ideal for replacing worn or damaged wheel studs to restore proper wheel attachment and safety. It is specifically designed to meet the requirements of these models, ensuring correct fit and function.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement for damaged or stripped wheel studs\u003c\/li\u003e\n\u003cli\u003eRestores secure wheel mounting and prevents wheel wobble\u003c\/li\u003e\n\u003cli\u003eAddresses issues with loose or missing lug studs\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper wheel alignment and balance\u003c\/li\u003e\n\u003cli\u003ePrevents potential wheel detachment during driving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dorman 610-155 wheel lug stud, ensure the wheel hub is clean and free of debris. Use appropriate tools to press or hammer the stud into the hub carefully, avoiding damage to the threads or splines. Torque the lug nuts to the manufacturer’s specifications to maintain proper clamping force. It is recommended to replace all wheel studs on the same axle to ensure uniform performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDorman wheel lug studs are manufactured to meet or exceed OEM standards for fit, form, and function. Made from durable steel with precise threading and serrated design, the 610-155 part number undergoes quality control inspections to ensure reliability. While specific warranty details may vary, Dorman typically offers limited warranties covering defects in material and workmanship.\u003c\/p\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":44017292345525,"sku":"BKKZ-610-155","price":38.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/RB_610155_Fro.jpg?v=1775009139"}],"url":"https:\/\/www.partcatalog.com\/collections\/hardware-fasteners-and-fittings-17.oembed?page=19","provider":"PartCatalog","version":"1.0","type":"link"}