{"title":"Brake \u003e Hoses and Pipes","description":"\u003cp\u003eBrake hoses and lines are the hydraulic and vacuum pathways that make your braking system work. Rubber brake hydraulic hoses flex with suspension movement and transmit pedal pressure to the calipers and wheel cylinders, while hard lines carry fluid through the chassis. Vacuum hoses and power brake booster lines sustain the engine vacuum that gives your power brake booster its assist. Rubber hoses degrade from the inside out — the inner liner can crack and delaminate, creating a one-way valve effect that causes caliper drag or a spongy pedal even with no visible leak. Most manufacturers recommend inspecting hydraulic hoses every 30,000 miles and replacing them by 100,000 miles or 6–8 years, whichever comes first. When buying, confirm the end fitting type (banjo, bubble flare, or inverted flare), overall length, and routing — even within the same model year, trim levels and brake package options can mean different hose configurations.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrake pedal feels soft, spongy, or slowly sinks to the floor\u003c\/strong\u003e — this often points to a delaminated hydraulic hose creating internal blockage or a failing booster vacuum line allowing air into the assist circuit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible cracking, swelling, or bulging on the rubber hose body\u003c\/strong\u003e — a hose that balloons under pressure is structurally compromised and can burst without warning; replace it immediately.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrake fluid weeping or wet spots at hose fittings or along the line\u003c\/strong\u003e — even a minor seep at a banjo bolt or flare fitting means the hose or line is no longer holding system pressure reliably.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne caliper dragging or a wheel that runs noticeably hotter than the others\u003c\/strong\u003e — a collapsed inner hose liner can trap pressure at a single caliper, causing uneven pad wear and heat buildup on that corner.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard brake pedal with no loss of fluid\u003c\/strong\u003e — this points specifically to a cracked or collapsed power brake booster vacuum hose or booster line, cutting off manifold vacuum to the booster diaphragm.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eABS or brake warning light after recent suspension or caliper work\u003c\/strong\u003e — disturbing an old hose during other repairs can crack brittle rubber or loosen a fitting that was marginal beforehand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow often should brake hoses be replaced, and do they need to be replaced in axle pairs?\u003c\/strong\u003e\n  Most OEM rubber hydraulic hoses have a practical service life of 6–10 years or 100,000 miles regardless of visible condition. Replacing in axle pairs (both fronts or both rears together) is strongly recommended — if one hose is failing due to age and heat cycling, its mate almost certainly is too.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAre stainless steel braided brake hoses worth it over OEM rubber replacements?\u003c\/strong\u003e\n  Braided stainless hoses with PTFE liners resist expansion under pressure, which can sharpen pedal feel noticeably on performance or track vehicles. For daily drivers, a quality OEM-spec rubber replacement (EPDM construction, DOT-compliant) performs identically to factory and costs significantly less — typically $15–$40 per hose versus $40–$90 for braided.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat else should I replace when doing brake hoses, and what does the job typically cost?\u003c\/strong\u003e\n  Replace the copper crush washers on banjo fittings and any flare nuts that show corrosion — they're inexpensive and re-using them risks a post-job leak. A full four-corner hydraulic hose replacement runs roughly $120–$300 in parts depending on vehicle; shop labor adds $80–$200 since the system must be bled afterward. DIY difficulty is moderate — straightforward on most cars, but seized fittings on high-mileage or rust-belt vehicles can significantly extend the job.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"ate-330324-brake-hydraulic-hose","title":"ATE 330324 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Porsche 911\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330324 is designed specifically for Porsche 911 models, ensuring precise fitment and dependable brake fluid transfer. This brake hydraulic hose is engineered to meet the rigorous demands of your vehicle's braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Porsche 911 brake systems\u003c\/li\u003e\n\u003cli\u003ePart number 330324 for exact replacement\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003cli\u003eBracket not included\u003c\/li\u003e\n\u003cli\u003eDurable construction for consistent brake fluid flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose product line focuses on delivering high-quality brake hoses that meet OEM specifications. This line is tailored to provide reliable hydraulic fluid transfer within the braking system, ensuring safety and performance. The 330324 hose is part of this line, designed to maintain the integrity of the brake system in Porsche 911 vehicles.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330324 is manufactured to fit Porsche 911 models, providing a direct replacement for the original brake hydraulic hose. It does not include mounting hardware or brackets, so these components must be sourced separately if needed. The hose is constructed to withstand the pressures and temperatures typical in brake systems, ensuring consistent performance and safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged brake hydraulic hoses on Porsche 911\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eAddressing brake system pressure loss due to hose failure\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity for safe vehicle operation\u003c\/li\u003e\n\u003cli\u003ePreventing contamination of brake fluid through compromised hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 330324, ensure that the brake system is properly depressurized and drained to avoid fluid spills. Since mounting hardware and brackets are not included, verify that existing components are in good condition or replace them as necessary. Proper torque specifications should be followed to avoid leaks or damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 330324 to meet strict quality standards, ensuring compatibility and durability for Porsche 911 brake systems. While specific warranty details are not provided, ATE products typically adhere to industry standards for reliability and performance.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384327012533,"sku":"CNJW-330324","price":49.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_330324_Generic_c93c6095-0412-450b-9850-0084221363eb.jpg?v=1774702559"},{"product_id":"ate-330341-brake-hydraulic-hose","title":"ATE 330341 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Porsche 928\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330341 is designed specifically for Porsche 928 models, ensuring precise fitment and dependable brake fluid transfer. This brake hydraulic hose is engineered to meet the rigorous demands of your vehicle's braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Original Brake Hydraulic Hose 330341\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Porsche 928 brake systems\u003c\/li\u003e\n\u003cli\u003ePart number 330341 for exact replacement\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003cli\u003eBracket not included\u003c\/li\u003e\n\u003cli\u003eDurable construction for consistent brake fluid flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake hoses that meet OEM specifications. This product line emphasizes durability and precise fitment, ensuring that each hose integrates seamlessly with the vehicle's braking components. The 330341 hose is part of this line, providing Porsche 928 owners with a reliable replacement option that maintains the integrity of the brake system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330341 is engineered to provide a secure and leak-free connection within the brake hydraulic system of the Porsche 928. It is manufactured to withstand the pressures and temperatures typical of brake fluid operation. While this hose does not include mounting hardware or brackets, it is designed to fit directly into the existing brake system setup, making it suitable for professional installation or experienced DIY mechanics.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hoses\u003c\/li\u003e\n\u003cli\u003eElimination of brake fluid leaks in the hydraulic system\u003c\/li\u003e\n\u003cli\u003eRestoration of proper brake fluid pressure and flow\u003c\/li\u003e\n\u003cli\u003eCorrection of brake pedal softness due to hose failure\u003c\/li\u003e\n\u003cli\u003ePrevention of brake system contamination from damaged hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the vehicle is securely lifted and supported before installation\u003c\/li\u003e\n\u003cli\u003eInspect existing brake lines and fittings for wear or damage\u003c\/li\u003e\n\u003cli\u003eUse appropriate brake fluid compatible with Porsche 928 specifications\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after hose replacement to remove air\u003c\/li\u003e\n\u003cli\u003eVerify hose routing matches original configuration to avoid kinks or interference\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 330341 to meet strict quality standards, ensuring reliable performance and safety. While specific warranty details are not provided, ATE products typically adhere to industry standards for durability and fitment. It is recommended to consult the product documentation or supplier for warranty information related to this part.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384327209141,"sku":"CNJW-330341","price":64.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_330341_Fro_8e7e6a32-dd14-4800-a4ab-cb169575f1e2.jpg?v=1774702559"},{"product_id":"ate-330454-brake-hydraulic-hose","title":"ATE 330454 Brake Hydraulic Hose - Rear","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Porsche 911\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330454 is designed specifically for Porsche 911 models, ensuring precise fitment and dependable brake fluid transfer. This brake hydraulic hose is engineered to meet the rigorous demands of your vehicle's braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Brake Hydraulic Hose 330454\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Porsche 911 brake systems\u003c\/li\u003e\n\u003cli\u003ePart number 330454 for exact replacement\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003cli\u003eBracket not included\u003c\/li\u003e\n\u003cli\u003eDurable construction for consistent brake fluid flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake hoses that meet original equipment specifications. This product line emphasizes durability and precise fitment, ensuring that each hose performs reliably within the brake system. The 330454 hose is part of this line, providing Porsche 911 owners with a component designed to maintain the integrity of their vehicle's hydraulic braking system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330454 is engineered to provide a secure and leak-free connection within the brake system of Porsche 911 vehicles. It facilitates the transfer of brake fluid from the master cylinder to the brake calipers, ensuring responsive braking performance. This hose is manufactured to meet strict quality standards, although it does not include mounting hardware or brackets, so these components must be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks in the hydraulic system\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid pressure and flow\u003c\/li\u003e\n\u003cli\u003eEliminating spongy or unresponsive brake pedal feel\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system safety and reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 330454 on a Porsche 911, ensure that the brake system is properly depressurized before removal. Since mounting hardware and brackets are not included, verify that existing components are in good condition or obtain replacements as necessary. After installation, bleed the brake system thoroughly to remove any air and confirm proper brake pedal feel and function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 330454 to meet stringent quality standards consistent with original equipment requirements. While specific warranty details are not provided, ATE products typically adhere to industry standards for durability and performance, supporting safe and reliable brake system operation.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384327504053,"sku":"CNJW-330454","price":38.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_330454_Generic_c5afa183-ffe2-4bf7-92fd-3403f6e90065.jpg?v=1774702560"},{"product_id":"ate-330459-brake-hydraulic-hose","title":"ATE 330459 Brake Hydraulic Hose","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Precise Stopping Power\u003c\/h2\u003e\u003cp\u003eThe ATE 330459 brake hydraulic hose is engineered to maintain consistent brake fluid pressure and ensure safe braking performance. Designed for compatibility with various vehicle makes and models, this hose supports the integrity of your braking system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDurable construction to withstand high pressure and temperature variations\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple vehicle makes and models requiring brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003ePart number 330459 ensures exact replacement fit\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials for extended service life\u003c\/li\u003e\n\u003cli\u003eMeets industry standards for brake system components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe ATE 330459 brake hydraulic hose is manufactured to meet strict quality and safety standards. This hose is designed to transfer brake fluid from the master cylinder to the brake calipers or wheel cylinders, enabling effective hydraulic pressure transmission. Its robust design resists expansion under pressure, maintaining consistent braking response. The hose's materials are selected to resist wear, corrosion, and environmental damage, ensuring reliable operation over time. While the product line information is not specified, ATE is known for producing brake components that adhere to rigorous testing and quality control.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose is used in hydraulic brake systems to maintain fluid integrity and pressure. It addresses several common issues:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents brake fluid leaks caused by cracked or worn hoses\u003c\/li\u003e\n\u003cli\u003eEliminates spongy brake pedal feel due to hose expansion\u003c\/li\u003e\n\u003cli\u003eResolves brake failure risks from deteriorated or damaged hoses\u003c\/li\u003e\n\u003cli\u003eMaintains consistent brake pressure for safe stopping distances\u003c\/li\u003e\n\u003cli\u003eReplaces hoses compromised by corrosion or environmental exposure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your vehicle’s make and model before installation\u003c\/li\u003e\n\u003cli\u003eInspect brake lines and fittings for damage or corrosion during replacement\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damaging hose fittings or brake components\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after installation to remove air pockets\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for fittings to prevent leaks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATE brake hydraulic hoses are manufactured under strict quality control processes to meet or exceed industry standards. While specific warranty details for part number 330459 are not provided, ATE products typically come with a limited warranty covering defects in materials and workmanship. For precise warranty terms, consult the product documentation or authorized sources.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384327700661,"sku":"CNJW-330459","price":18.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_330459_Fro.jpg?v=1774702560"},{"product_id":"ate-330558-brake-hydraulic-hose","title":"ATE 330558 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eOverview of ATE Original Brake Hydraulic Hose 330558\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330558 is designed specifically for Jaguar models including Vanden Plas, XJ6, XJR, XJ12, and XJRS. This brake hydraulic hose ensures reliable fluid transfer within the braking system, maintaining consistent brake performance under various driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Jaguar Vanden Plas, XJ6, XJR, XJ12, and XJRS\u003c\/li\u003e\n\u003cli\u003ePart number 330558 for precise identification\u003c\/li\u003e\n\u003cli\u003eBrake hydraulic hose category for fluid transfer in braking systems\u003c\/li\u003e\n\u003cli\u003eNo mounting hardware included\u003c\/li\u003e\n\u003cli\u003eNo bracket included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails About the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose product line focuses on delivering components that meet original equipment specifications for brake hydraulic systems. This ensures that the hose maintains proper pressure and fluid integrity, which is critical for the braking performance of Jaguar vehicles. The 330558 hose is engineered to match the exact fit and function required by the specified Jaguar models.\u003c\/p\u003e\u003ch2\u003eProduct Description and Attributes\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330558 is a direct replacement part designed to maintain the integrity of the brake hydraulic system. It does not include mounting hardware or brackets, so these components must be reused or sourced separately. This hose is manufactured to meet stringent quality standards, ensuring durability and resistance to brake fluid and environmental factors. Its compatibility with Jaguar Vanden Plas, XJ6, XJR, XJ12, and XJRS models makes it a reliable choice for maintaining factory brake system performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks in Jaguar Vanden Plas, XJ6, XJR, XJ12, and XJRS\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid pressure and pedal feel\u003c\/li\u003e\n\u003cli\u003eAddressing brake system maintenance during routine servicing\u003c\/li\u003e\n\u003cli\u003ePreventing brake failure due to hose degradation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 330558, ensure that the brake system is properly depressurized and drained to avoid fluid loss. Since mounting hardware and brackets are not included, verify the condition of existing components and replace if necessary. Use appropriate brake fluid compatible with Jaguar specifications and bleed the brake system thoroughly after installation to remove air and ensure optimal brake performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 330558 to meet or exceed OEM standards for Jaguar vehicles. While specific warranty details are not provided, ATE products typically undergo rigorous testing to ensure durability and reliability in brake system applications.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384327831733,"sku":"CNJW-330558","price":38.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_330558_Fro_987676bc-731a-4a81-9cdc-daa62d11677b.jpg?v=1774702560"},{"product_id":"ate-330621-brake-hydraulic-hose","title":"ATE 330621 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volvo S60, V70, and S80\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330621 is designed specifically for Volvo models including the S60, V70, and S80. This brake hydraulic hose ensures consistent brake fluid transfer, maintaining the integrity of your vehicle's braking system without the need for additional mounting hardware or brackets.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo S60, V70, and S80 models\u003c\/li\u003e\n\u003cli\u003ePart number 330621 for precise identification\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003cli\u003eNo bracket included, designed for direct replacement\u003c\/li\u003e\n\u003cli\u003eManufactured under the ATE Original Brake Hydraulic Hose product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: ATE Original Brake Hydraulic Hose\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering components that meet strict OEM standards for brake system reliability and safety. This product line is engineered to provide a direct fit replacement for brake hydraulic hoses, ensuring compatibility and performance for specific vehicle makes and models, such as the Volvo S60, V70, and S80. The 330621 hose maintains the quality and durability expected from ATE, supporting consistent brake fluid flow without requiring additional mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330621 is a critical component in the brake system of Volvo vehicles, facilitating the transfer of brake fluid from the master cylinder to the brake calipers. This hose is designed to withstand high pressure and temperature variations typical in braking applications. It is supplied without mounting hardware or brackets, which means it is intended for use with existing vehicle fittings. The absence of included brackets or hardware simplifies the replacement process for technicians familiar with Volvo brake systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses on Volvo S60, V70, and S80\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eAddressing brake system pressure loss due to hose damage\u003c\/li\u003e\n\u003cli\u003ePreventing brake failure from compromised hydraulic lines\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity during routine maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 330621, ensure the vehicle is securely lifted and the brake system is depressurized. Since mounting hardware and brackets are not included, retain and reuse the original components unless replacement is necessary. Properly torque fittings to manufacturer specifications to avoid leaks. After installation, bleed the brake system thoroughly to remove air and verify proper brake function before driving.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 330621 to meet stringent quality standards consistent with OEM requirements. While specific warranty details are not provided, ATE products typically undergo rigorous testing to ensure durability and performance in demanding automotive environments. Using this hose supports maintaining the safety and reliability of your Volvo's braking system.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384328323253,"sku":"CNJW-330621","price":35.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_330621_Fro_0a6d3bd1-c0e1-430f-b9ef-3b8b0ab1cd91.jpg?v=1774702561"},{"product_id":"ate-330664-brake-hydraulic-hose","title":"ATE 330664 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Jaguar X-Type\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330664 is designed specifically for Jaguar X-Type models, ensuring precise fitment and dependable brake fluid transfer. This brake hydraulic hose is engineered to meet the rigorous demands of your vehicle's braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Brake Hydraulic Hose 330664\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Jaguar X-Type brake systems\u003c\/li\u003e\n\u003cli\u003ePart number 330664 for exact replacement\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003cli\u003eNo bracket included, designed for direct hose replacement\u003c\/li\u003e\n\u003cli\u003eManufactured under the ATE Original Brake Hydraulic Hose product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering components that meet original equipment specifications. This product line ensures that each brake hydraulic hose, including part number 330664, maintains the integrity and performance expected from factory-installed parts. The hoses are designed to provide consistent brake fluid flow and withstand the pressures within the braking system of vehicles like the Jaguar X-Type.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330664 is a direct replacement part tailored for the Jaguar X-Type. It facilitates the transfer of brake fluid between the master cylinder and brake calipers, playing a critical role in the vehicle’s braking performance. This hose does not come with mounting hardware or brackets, so it is intended for use with existing components or separately sourced fittings. The absence of included brackets means installation requires careful attention to the original mounting points on the Jaguar X-Type.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks due to worn or damaged hoses\u003c\/li\u003e\n\u003cli\u003eReduced braking efficiency caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eSwollen or cracked brake hoses affecting brake response\u003c\/li\u003e\n\u003cli\u003eReplacement of aged or corroded brake hydraulic lines\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid pressure in Jaguar X-Type models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 330664 on a Jaguar X-Type, ensure the brake system is fully depressurized before removal. Since mounting hardware and brackets are not included, retain original fittings or source compatible hardware separately. Inspect all connections for leaks after installation and bleed the brake system to remove air pockets for optimal brake performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 330664 to meet strict quality standards consistent with original equipment. While specific warranty details are not provided, ATE products typically adhere to industry standards for durability and reliability in brake system components.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384330584245,"sku":"CNJW-330664","price":35.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_330664_Fro_cc0a0203-e166-4d70-a575-7641239ce740.jpg?v=1774702561"},{"product_id":"ate-330733-brake-hydraulic-hose","title":"ATE 330733 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volvo 240\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330733 is designed specifically for the Volvo 240, ensuring precise fitment and dependable brake fluid transfer. This brake hydraulic hose is engineered to meet the demands of your vehicle's braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Brake Hydraulic Hose 330733\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo 240 models\u003c\/li\u003e\n\u003cli\u003ePart number 330733 for exact identification\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003cli\u003eNo bracket included with this hose\u003c\/li\u003e\n\u003cli\u003eDesigned for brake fluid transfer in hydraulic brake systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering components that meet original equipment specifications for brake hydraulic systems. This product line emphasizes precise fitment and reliable performance, making it suitable for vehicles like the Volvo 240. The 330733 hose is part of this line, ensuring compatibility and quality consistent with ATE's standards.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330733 is engineered to provide a secure and leak-free connection within the brake hydraulic system of the Volvo 240. It is manufactured to withstand the pressures and temperatures typical of brake fluid operation. Note that this hose does not come with mounting hardware or brackets, so these components must be sourced separately if needed. The part number 330733 ensures you receive the correct hose designed for your vehicle's specific brake system requirements.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks in the hydraulic system\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid pressure and flow\u003c\/li\u003e\n\u003cli\u003eEliminating soft or spongy brake pedal feel due to hose failure\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity for Volvo 240 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 330733, ensure the brake system is fully depressurized and fluid is drained to prevent spills. Since mounting hardware and brackets are not included, verify that existing components are in good condition or replace them as necessary. Properly torque fittings to manufacturer specifications to avoid leaks. Bleed the brake system thoroughly after installation to remove air and restore braking performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 330733 to meet strict quality standards consistent with original equipment requirements. While specific warranty details are not provided, ATE products typically adhere to industry standards for durability and reliability. Using this hose helps maintain the safety and functionality of the Volvo 240 brake system.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384331272373,"sku":"CNJW-330733","price":29.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_330733_Fro_6291be45-0ddc-4fd1-8c3c-98a936bff885.jpg?v=1774702561"},{"product_id":"ate-330986-brake-hydraulic-hose","title":"ATE 330986 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volvo XC70 and V70\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330986 is designed specifically for Volvo XC70 and V70 models, ensuring precise fitment and dependable brake performance. This brake hydraulic hose is engineered to meet the rigorous demands of your vehicle's braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo XC70 and V70 models\u003c\/li\u003e\n\u003cli\u003ePart number 330986 for exact replacement\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003cli\u003eNo bracket included with this hose\u003c\/li\u003e\n\u003cli\u003eCategory: Brake Hydraulic Hose for reliable fluid transfer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake components that meet OEM specifications. This product line emphasizes durability and precise engineering to maintain the integrity of the brake system. The 330986 hose is part of this line, providing a direct replacement solution for Volvo vehicles requiring dependable brake fluid transfer without additional mounting components.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 330986 is manufactured to ensure consistent brake fluid flow and pressure resistance. Designed for Volvo XC70 and V70 models, this hose supports the hydraulic brake system by connecting brake lines securely. Note that this part does not include mounting hardware or brackets, so existing components must be reused or sourced separately during installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged brake hydraulic hoses on Volvo XC70 and V70\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eAddressing brake pressure loss due to hose failure\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity for safe vehicle operation\u003c\/li\u003e\n\u003cli\u003ePreventing contamination of brake fluid through compromised hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 330986, ensure that the existing mounting hardware and brackets are in good condition, as these are not included with the hose. Properly secure the hose to avoid kinks or twists that could impair brake fluid flow. Bleed the brake system thoroughly after installation to remove any air pockets and verify system pressure.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATE products are manufactured to meet strict quality standards, ensuring reliable performance in brake systems. While specific warranty details for part number 330986 are not provided here, ATE typically offers coverage against manufacturing defects. It is recommended to consult the product documentation or supplier for exact warranty terms.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384331665589,"sku":"CNJW-330986","price":27.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_330986_Fro_b72a70d8-8d1d-42fe-895b-ac5e0423885c.jpg?v=1774702562"},{"product_id":"ate-331076-brake-hydraulic-hose","title":"ATE 331076 Brake Hydraulic Hose - Rear","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volvo Models\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331076 is designed specifically for Volvo vehicles including the S60, V70, XC70, and S80. This brake hydraulic hose ensures consistent brake fluid transfer, maintaining the integrity of your braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Brake Hydraulic Hose 331076\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo S60, V70, XC70, and S80 models\u003c\/li\u003e\n\u003cli\u003ePart number 331076 for precise identification\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included for flexible installation options\u003c\/li\u003e\n\u003cli\u003eNo bracket included, allowing use with existing vehicle components\u003c\/li\u003e\n\u003cli\u003eManufactured under the ATE Original Brake Hydraulic Hose product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331076 is engineered to meet the exact specifications required by Volvo vehicles such as the S60, V70, XC70, and S80. This brake hydraulic hose facilitates the transfer of brake fluid from the master cylinder to the brake calipers, ensuring reliable braking performance. It is important to note that this part does not include mounting hardware or brackets, which allows for compatibility with the original vehicle fittings and supports straightforward replacement without additional components.\u003c\/p\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose product line focuses on delivering components that adhere to strict quality standards, providing durability and consistent performance. This line is recognized for its precision manufacturing, ensuring that each hose meets the necessary pressure and flexibility requirements for safe brake operation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses on Volvo S60, V70, XC70, and S80\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by damaged hoses\u003c\/li\u003e\n\u003cli\u003eAddressing reduced brake responsiveness due to hose deterioration\u003c\/li\u003e\n\u003cli\u003ePreventing brake system failure from hose rupture or swelling\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity during routine maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific Volvo model before installation\u003c\/li\u003e\n\u003cli\u003eCheck existing mounting hardware and brackets as this hose does not include them\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after hose replacement to remove air\u003c\/li\u003e\n\u003cli\u003eInspect surrounding brake components for wear during installation\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damage to the hose or fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331076 is manufactured to meet OEM standards for durability and performance. While mounting hardware and brackets are not included, the hose itself undergoes rigorous testing to ensure it withstands the pressures and conditions of brake system operation. Warranty coverage details should be confirmed with the point of purchase or manufacturer documentation.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384331796661,"sku":"CNJW-331076","price":26.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331076_Fro_17106cdf-9fb6-4e73-8171-13c7586121dc.jpg?v=1774702562"},{"product_id":"ate-331167-brake-hydraulic-hose","title":"ATE 331167 Brake Hydraulic Hose - Rear","description":"\u003ch2\u003eOverview of ATE Original Brake Hydraulic Hose 331167\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331167 is designed for reliable brake fluid transfer in select Volkswagen and Audi models. This brake hydraulic hose ensures consistent brake performance without including mounting hardware or brackets, making it suitable for professional installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volkswagen Tiguan, Tiguan Limited, Audi Q3, Q3 Quattro, and Audi CC models\u003c\/li\u003e\n\u003cli\u003ePart number 331167 for precise identification\u003c\/li\u003e\n\u003cli\u003eBrake hydraulic hose without mounting hardware included\u003c\/li\u003e\n\u003cli\u003eNo bracket included, designed for direct replacement\u003c\/li\u003e\n\u003cli\u003eGTIN 04006633375047 for product verification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake hoses engineered to meet OEM specifications. This product line emphasizes durability and precise fitment, ensuring compatibility with specific vehicle models such as Volkswagen Tiguan and Audi Q3. The 331167 hose is part of this line, providing a direct replacement solution without additional mounting components.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331167 is a critical component in the brake system, responsible for transferring brake fluid under pressure from the master cylinder to the brake calipers. This hose is engineered to withstand high pressure and temperature variations typical in braking systems. It is designed specifically for Volkswagen Tiguan Limited, Tiguan, Audi Q3, Q3 Quattro, and Audi CC models, ensuring a precise fit and reliable operation. Note that this part does not include mounting hardware or brackets, so these must be reused or sourced separately during installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose damage\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid pressure and pedal feel\u003c\/li\u003e\n\u003cli\u003eAddressing brake system failures related to hose deterioration\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity in Volkswagen Tiguan and Audi Q3 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with Volkswagen Tiguan Limited, Tiguan, Audi Q3, Q3 Quattro, and Audi CC before installation\u003c\/li\u003e\n\u003cli\u003eReuse existing mounting hardware and brackets as this part does not include them\u003c\/li\u003e\n\u003cli\u003eInspect brake system components for wear during installation\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after hose replacement to remove air\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for fittings and connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331167 is manufactured to meet strict quality standards, ensuring durability and performance consistent with OEM requirements. While specific warranty details are not provided, ATE products typically adhere to industry standards for reliability and safety. Verification of GTIN 04006633375047 can assist in confirming product authenticity.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384331894965,"sku":"CNJW-331167","price":30.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331167_Fro_a5e14b93-40e9-4d95-877e-fe4f83cf228e.jpg?v=1774702562"},{"product_id":"ate-331197-brake-hydraulic-hose","title":"ATE 331197 Brake Hydraulic Hose - Rear Left Outer","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volvo Models\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331197 is designed specifically for select Volvo vehicles, including the S60, V60, XC60, S80, XC70, and V70 models. This brake hydraulic hose ensures consistent brake fluid transfer, maintaining the integrity of your braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Original Brake Hydraulic Hose 331197\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo S60, S60 Cross Country, V60, V60 Cross Country, XC60, S80, XC70, and V70\u003c\/li\u003e\n\u003cli\u003ePart number 331197 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eBrake hydraulic hose designed for fluid transfer in braking systems\u003c\/li\u003e\n\u003cli\u003eNo mounting hardware included, allowing for use with existing components\u003c\/li\u003e\n\u003cli\u003eNo bracket included, suitable for direct hose replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering reliable brake fluid transfer components that meet OEM specifications. This product line emphasizes durability and compatibility, providing brake hydraulic hoses engineered to fit specific vehicle models accurately. The 331197 hose is part of this line, ensuring it meets the quality and performance standards expected for Volvo brake systems.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331197 is engineered to maintain the proper flow of brake fluid under pressure, critical for safe and effective braking performance. Designed without mounting hardware or brackets, this hose is intended for direct replacement where existing fittings and supports are reused. Its compatibility with a range of Volvo models, including the S60, V60, XC60, S80, XC70, and V70, makes it a suitable choice for owners seeking a precise fit and reliable function.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks due to worn or damaged hoses\u003c\/li\u003e\n\u003cli\u003eReduced braking efficiency caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eSwollen or cracked brake hoses affecting fluid pressure\u003c\/li\u003e\n\u003cli\u003eReplacement of aged or corroded brake hydraulic lines\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid flow in Volvo S60, V60, XC60, and related models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the brake system is depressurized before removal\u003c\/li\u003e\n\u003cli\u003eReuse existing mounting hardware and brackets as this hose does not include them\u003c\/li\u003e\n\u003cli\u003eInspect related brake components during installation for wear\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after hose replacement to remove air\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your specific Volvo model using part number 331197\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE Original Brake Hydraulic Hose 331197 is manufactured to meet stringent quality standards, ensuring reliable performance and durability. While specific warranty details are not provided, ATE products typically conform to OEM quality requirements, supporting safe and consistent brake system operation.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384332288181,"sku":"CNJW-331197","price":62.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331197_Fro_9b5bc0dc-af43-4688-bef6-3d833cad0c10.jpg?v=1774702563"},{"product_id":"ate-331198-brake-hydraulic-hose","title":"ATE 331198 Brake Hydraulic Hose - Rear Right Outer","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volvo Models\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331198 is designed specifically for select Volvo vehicles, including the S60, V60, XC60, S80, XC70, and V70 models. This brake hydraulic hose ensures consistent brake fluid transfer, maintaining the integrity of your braking system without the need for additional mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Original Brake Hydraulic Hose 331198\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo S60, S60 Cross Country, V60, V60 Cross Country, XC60, S80, XC70, and V70\u003c\/li\u003e\n\u003cli\u003ePart number 331198 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eBrake hydraulic hose designed for direct replacement\u003c\/li\u003e\n\u003cli\u003eNo mounting hardware included, simplifying installation with existing components\u003c\/li\u003e\n\u003cli\u003eNo bracket included, intended for use with factory or existing mounting brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering brake hoses engineered to meet original equipment specifications. This product line emphasizes durability and compatibility, ensuring that each hose, including part number 331198, integrates seamlessly with the vehicle’s braking system. The hoses are manufactured to maintain proper brake fluid pressure and resist wear, contributing to reliable brake performance on Volvo models.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331198 is a critical component in the brake system of various Volvo vehicles. It facilitates the transfer of brake fluid from the master cylinder to the brake calipers or wheel cylinders, enabling effective braking response. This hose is manufactured without included mounting hardware or brackets, which means it is intended to be installed using the vehicle’s existing components. This design choice helps maintain the original fit and function while allowing for straightforward replacement.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks due to cracked or worn hoses\u003c\/li\u003e\n\u003cli\u003eReduced brake responsiveness caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eSwollen or bulging brake hoses affecting fluid pressure\u003c\/li\u003e\n\u003cli\u003eCorrosion or damage from road debris impacting hose integrity\u003c\/li\u003e\n\u003cli\u003eReplacement of aged or damaged brake hydraulic hoses to restore braking performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the vehicle’s brake system is depressurized before removal\u003c\/li\u003e\n\u003cli\u003eUse the existing mounting hardware and brackets for installation, as none are included\u003c\/li\u003e\n\u003cli\u003eInspect surrounding brake components for wear or damage during installation\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after hose replacement to remove air\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Volvo S60, V60, XC60, S80, XC70, and V70 models before installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 331198 to meet strict quality standards aligned with original equipment requirements. While specific warranty details are not provided, ATE products typically undergo rigorous testing to ensure durability and performance in demanding automotive environments.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384332353717,"sku":"CNJW-331198","price":67.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331198_Fro_965f3d80-8f4c-4922-9706-3c7d60efb8d9.jpg?v=1774702563"},{"product_id":"ate-331199-brake-hydraulic-hose","title":"ATE 331199 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volvo Models\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331199 is designed specifically for select Volvo vehicles, including the S60, V60, S80, and XC70. This brake hydraulic hose ensures consistent brake fluid transfer, maintaining optimal braking performance under various driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo S60, V60, S80, and XC70 models\u003c\/li\u003e\n\u003cli\u003ePart number 331199 for precise identification\u003c\/li\u003e\n\u003cli\u003eBrake hydraulic hose without mounting hardware included\u003c\/li\u003e\n\u003cli\u003eNo bracket included, designed for direct replacement\u003c\/li\u003e\n\u003cli\u003eManufactured under the ATE Original Brake Hydraulic Hose product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake hoses engineered to meet or exceed OEM specifications. This product line emphasizes durability and reliability, providing components that integrate seamlessly with the vehicle's braking system. The 331199 hose is part of this line, ensuring compatibility and performance for Volvo brake systems.\u003c\/p\u003e\u003ch2\u003eProduct Details and Attributes\u003c\/h2\u003e\u003cp\u003eThe ATE brake hydraulic hose 331199 is designed without mounting hardware or brackets, which means it is intended for use with existing hardware on the vehicle. This design simplifies installation for technicians familiar with Volvo brake systems. The hose is engineered to handle the hydraulic pressure required for effective brake fluid transmission, contributing to safe and responsive braking.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses on Volvo S60, V60, S80, and XC70\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by damaged hoses\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid pressure and pedal feel\u003c\/li\u003e\n\u003cli\u003ePreventing brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity during routine maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 331199, ensure the vehicle’s brake system is depressurized and fluid is properly drained. Since mounting hardware and brackets are not included, reuse existing components unless replacement is necessary. Verify hose routing matches OEM specifications to avoid kinks or interference. Bleed the brake system thoroughly after installation to remove air and ensure optimal brake performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the 331199 brake hydraulic hose to meet stringent quality standards, ensuring durability and reliable performance. While specific warranty details are not provided, ATE products typically adhere to industry standards for material and workmanship quality, supporting long-term vehicle safety and function.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384332419253,"sku":"CNJW-331199","price":94.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331199_Fro_074b580c-bda2-4e2b-a6d3-dc32a3ee0f76.jpg?v=1774702564"},{"product_id":"ate-331202-brake-hydraulic-hose","title":"ATE 331202 Brake Hydraulic Hose","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Precise Stopping Power\u003c\/h2\u003e\u003cp\u003eThe ATE 331202 brake hydraulic hose is engineered to deliver consistent brake fluid transfer for safe and effective braking performance. Designed for specific vehicle applications, this hose ensures reliable operation in your brake system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDurable construction for long-lasting brake fluid containment\u003c\/li\u003e\n\u003cli\u003eCompatible with various vehicle makes and models requiring brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003ePart number 331202 ensures exact replacement fitment\u003c\/li\u003e\n\u003cli\u003eResistant to high pressure and temperature variations in braking systems\u003c\/li\u003e\n\u003cli\u003eManufactured by ATE, a recognized name in automotive brake components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe ATE 331202 brake hydraulic hose is a critical component in the brake system, responsible for transferring brake fluid from the master cylinder to the brake calipers or wheel cylinders. This hose is designed to withstand the hydraulic pressure generated during braking and resist wear from heat and environmental exposure. While the product JSON does not specify exact vehicle fitments, this hose is typically compatible with a range of European and domestic vehicles that require a brake hydraulic hose matching the 331202 part number. The absence of a specific brand line indicates this is a standard ATE replacement part, focusing on quality and reliability without additional product line features.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose damage\u003c\/li\u003e\n\u003cli\u003eAddressing brake system pressure loss due to hose failure\u003c\/li\u003e\n\u003cli\u003eImproving brake pedal feel by restoring proper fluid transfer\u003c\/li\u003e\n\u003cli\u003ePreventing brake system contamination from external elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE 331202 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use appropriate brake line wrenches to prevent damage to fittings. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal response. Inspect all connections for leaks before road testing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATE manufactures its brake hydraulic hoses to meet or exceed OEM standards, ensuring durability and safety. While specific warranty details for part number 331202 are not provided, ATE products typically come with a limited warranty covering defects in materials and workmanship. For precise warranty terms, consult the product documentation or authorized distributors.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384332910773,"sku":"CNJW-331202","price":25.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331202_Fro.jpg?v=1774702564"},{"product_id":"ate-331203-brake-hydraulic-hose","title":"ATE 331203 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volvo Models\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331203 is designed specifically for Volvo vehicles including the S60, V60, S80, V70, and XC70. This brake hydraulic hose ensures consistent brake fluid transfer, maintaining the integrity of your braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo S60, V60, S80, V70, and XC70 models\u003c\/li\u003e\n\u003cli\u003ePart number 331203 for precise identification\u003c\/li\u003e\n\u003cli\u003eBrake hydraulic hose without mounting hardware included\u003c\/li\u003e\n\u003cli\u003eNo bracket included, designed for direct replacement\u003c\/li\u003e\n\u003cli\u003eManufactured under the ATE Original Brake Hydraulic Hose product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake hoses engineered to meet or exceed OEM specifications. This product line emphasizes durability and reliability, providing components that integrate seamlessly with the vehicle’s braking system. The 331203 hose is part of this line, ensuring compatibility and performance for Volvo brake systems without additional mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eProduct Details and Attributes\u003c\/h2\u003e\u003cp\u003eThe ATE 331203 brake hydraulic hose is designed to transfer brake fluid efficiently between the master cylinder and brake calipers or wheel cylinders. It is important to note that this hose does not come with mounting hardware or brackets, which means it is intended for use with existing components or requires separate purchase of these parts if needed. This design choice allows for straightforward replacement in Volvo S60, V60, S80, V70, and XC70 models, maintaining the original brake system setup.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose damage\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid pressure and flow\u003c\/li\u003e\n\u003cli\u003ePreventing brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system safety and reliability in Volvo vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 331203, ensure the vehicle is securely lifted and the brake system is depressurized. Since mounting hardware and brackets are not included, verify the condition of existing components before installation. Properly torque all fittings to manufacturer specifications and bleed the brake system thoroughly to remove air and ensure optimal brake performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the 331203 brake hydraulic hose to meet stringent quality standards, ensuring durability and reliable performance. While specific warranty details are not provided, ATE products typically adhere to industry standards for material and workmanship quality, supporting safe and effective brake system operation.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384333107381,"sku":"CNJW-331203","price":81.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331203_Fro_0c98009f-6fed-419d-9cf3-2ec62bcf8b23.jpg?v=1774702564"},{"product_id":"ate-331257-brake-hydraulic-hose","title":"ATE 331257 Brake Hydraulic Hose","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volkswagen Beetle\u003c\/h2\u003e\u003cp\u003eThe ATE 331257 brake hydraulic hose is designed specifically for Volkswagen Beetle models, ensuring precise fitment and dependable brake performance. This component is essential for maintaining the integrity of your vehicle's braking system.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE 331257 Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volkswagen Beetle brake systems\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand high hydraulic pressure\u003c\/li\u003e\n\u003cli\u003eOEM-quality standards for reliable brake fluid transfer\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials for extended service life\u003c\/li\u003e\n\u003cli\u003eDirect replacement part number 331257 for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Brake Hydraulic Hose\u003c\/h2\u003e\u003cp\u003eThe ATE 331257 brake hydraulic hose is engineered to meet the exact specifications required by Volkswagen Beetle vehicles. This hose facilitates the transfer of brake fluid from the master cylinder to the brake calipers, enabling effective hydraulic pressure application. Manufactured with high-grade materials, it resists wear, heat, and corrosion, which are common challenges in brake system components. The precise fitment reduces the risk of leaks and ensures consistent braking performance under various driving conditions.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks due to cracked or worn hoses\u003c\/li\u003e\n\u003cli\u003eReduced braking efficiency from damaged hydraulic lines\u003c\/li\u003e\n\u003cli\u003eBrake pedal softness caused by hose expansion or failure\u003c\/li\u003e\n\u003cli\u003eCorrosion-related hose deterioration affecting brake safety\u003c\/li\u003e\n\u003cli\u003eReplacement of aged or deteriorated brake hydraulic hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the vehicle is securely lifted and supported before installation\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after hose replacement to remove air\u003c\/li\u003e\n\u003cli\u003eInspect surrounding brake components for wear during installation\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damaging fittings or hose ends\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Volkswagen Beetle model year before installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATE manufactures the 331257 brake hydraulic hose to meet stringent quality standards, ensuring durability and safety. While specific warranty details may vary, ATE products typically come with a limited warranty covering defects in materials and workmanship. This provides confidence in the part’s reliability when installed according to manufacturer guidelines.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384333598901,"sku":"CNJW-331257","price":27.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331257_Fro.jpg?v=1774702565"},{"product_id":"ate-331258-brake-hydraulic-hose","title":"ATE 331258 Brake Hydraulic Hose","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volkswagen Beetle\u003c\/h2\u003e\u003cp\u003eThe ATE 331258 brake hydraulic hose is designed specifically for Volkswagen Beetle models, ensuring precise fitment and dependable brake performance. This component is essential for maintaining the integrity of your vehicle's braking system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volkswagen Beetle models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting service\u003c\/li\u003e\n\u003cli\u003eMeets OEM specifications for brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003ePart number 331258 for accurate identification\u003c\/li\u003e\n\u003cli\u003eEngineered to withstand high brake fluid pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe ATE 331258 brake hydraulic hose is manufactured to meet strict quality standards, providing a secure and leak-free connection within the brake system of Volkswagen Beetle vehicles. This hose is built to resist wear, corrosion, and the high temperatures generated during braking. Its design ensures consistent brake fluid flow, which is critical for safe and responsive braking performance. The part number 331258 corresponds to this specific hose, facilitating easy replacement and compatibility verification.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose is used to transfer brake fluid from the master cylinder to the brake calipers or wheel cylinders, playing a vital role in the hydraulic braking system. It addresses several common issues, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePreventing brake fluid leaks that can reduce braking efficiency\u003c\/li\u003e\n\u003cli\u003eReplacing worn or cracked hoses that may cause brake failure\u003c\/li\u003e\n\u003cli\u003eMaintaining proper brake fluid pressure for consistent pedal feel\u003c\/li\u003e\n\u003cli\u003eEliminating hose swelling or bulging under pressure\u003c\/li\u003e\n\u003cli\u003eEnsuring compatibility with Volkswagen Beetle brake components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE 331258 brake hydraulic hose on a Volkswagen Beetle, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use appropriate tools to prevent damage to fittings and connectors. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal response. Inspect all connections for leaks before driving.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the 331258 brake hydraulic hose to meet or exceed OEM standards, ensuring reliable performance and safety. While specific warranty details may vary, ATE products typically come with a limited warranty against defects in materials and workmanship. Refer to the product documentation or contact the manufacturer for precise warranty information.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384333664437,"sku":"CNJW-331258","price":27.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331258_Fro.jpg?v=1774702565"},{"product_id":"ate-331266-brake-hydraulic-hose","title":"ATE 331266 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Porsche 911\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331266 is designed specifically for Porsche 911 models, ensuring precise fitment and dependable brake fluid transfer. This brake hydraulic hose is engineered to meet the rigorous demands of your vehicle's braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Original Brake Hydraulic Hose 331266\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Porsche 911 brake systems\u003c\/li\u003e\n\u003cli\u003ePart number 331266 for exact replacement\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003cli\u003eNo bracket included, designed for direct hose replacement\u003c\/li\u003e\n\u003cli\u003eManufactured under the ATE Original Brake Hydraulic Hose product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake hoses that meet OEM specifications. This product line emphasizes durability and precise fitment for specific vehicle models, such as the Porsche 911. The hoses are engineered to maintain brake fluid integrity and withstand the pressures of modern braking systems, ensuring consistent performance and safety.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331266 is a direct replacement part designed for Porsche 911 vehicles. It facilitates the transfer of brake fluid from the master cylinder to the brake calipers, playing a critical role in the hydraulic braking system. This hose does not come with mounting hardware or brackets, so it is intended for use with existing components or separate mounting solutions. The part number 331266 ensures compatibility and ease of identification when servicing Porsche 911 brake systems.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks due to worn or damaged hoses\u003c\/li\u003e\n\u003cli\u003eReduced braking efficiency from hose deterioration\u003c\/li\u003e\n\u003cli\u003eSwollen or cracked brake hoses affecting brake response\u003c\/li\u003e\n\u003cli\u003eReplacement of aged or OEM hoses to maintain system integrity\u003c\/li\u003e\n\u003cli\u003ePreventing brake failure caused by compromised hydraulic lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the vehicle is securely lifted and supported before installation\u003c\/li\u003e\n\u003cli\u003eInspect existing mounting hardware and brackets for wear; replace if necessary\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after hose installation to remove air\u003c\/li\u003e\n\u003cli\u003eUse the part number 331266 to verify correct hose routing and fitment on Porsche 911\u003c\/li\u003e\n\u003cli\u003eDo not reuse old mounting hardware if damaged or corroded\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE Original Brake Hydraulic Hose 331266 is manufactured to meet strict quality standards consistent with OEM requirements. While mounting hardware and brackets are not included, the hose itself undergoes rigorous testing to ensure durability and performance under normal operating conditions. Warranty details should be confirmed with the product supplier or manufacturer.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384333762741,"sku":"CNJW-331266","price":21.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331266_Dia_1361147e-261f-463a-86dc-2be90be8a7de.jpg?v=1774702565"},{"product_id":"ate-331269-brake-hydraulic-hose","title":"ATE 331269 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Mercedes-Benz SL Models\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331269 is designed specifically for select Mercedes-Benz SL series vehicles, including the SL550, SL63 AMG, SL65 AMG, SL600, SL55 AMG, and SL500. This brake hydraulic hose ensures consistent brake fluid transfer for optimal braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz SL550, SL63 AMG, SL65 AMG, SL600, SL55 AMG, and SL500\u003c\/li\u003e\n\u003cli\u003ePart number 331269 for precise identification\u003c\/li\u003e\n\u003cli\u003eBrake hydraulic hose without mounting hardware included\u003c\/li\u003e\n\u003cli\u003eNo bracket included, designed for direct replacement\u003c\/li\u003e\n\u003cli\u003eManufactured under the ATE Original Brake Hydraulic Hose product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake hoses engineered to meet or exceed OEM specifications. This product line emphasizes durability and reliability, providing components that maintain brake system integrity under demanding conditions. The 331269 hose is part of this line, ensuring compatibility and performance for Mercedes-Benz SL models requiring precise brake fluid delivery.\u003c\/p\u003e\u003ch2\u003eProduct Details and Attributes\u003c\/h2\u003e\u003cp\u003eThe ATE 331269 brake hydraulic hose is designed without mounting hardware or brackets, allowing for straightforward installation using existing vehicle components. This design approach supports a clean replacement process for Mercedes-Benz SL550, SL63 AMG, SL65 AMG, SL600, SL55 AMG, and SL500 models. The hose facilitates secure and leak-free brake fluid transfer, critical for maintaining brake system responsiveness and safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks in the hydraulic system\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid pressure and flow\u003c\/li\u003e\n\u003cli\u003eAddressing brake system performance degradation due to hose damage\u003c\/li\u003e\n\u003cli\u003eEnsuring compliance with manufacturer brake system specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 331269, ensure the vehicle is securely lifted and the brake system is depressurized. Since mounting hardware and brackets are not included, reuse existing components or source compatible parts as needed. Inspect all connections for proper sealing and torque specifications to prevent leaks. Bleed the brake system thoroughly after installation to remove air and restore brake responsiveness.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the 331269 brake hydraulic hose to meet stringent quality standards, ensuring durability and reliable performance. While specific warranty details are not provided, ATE products typically adhere to OEM quality requirements, supporting long-term service life and safety compliance for Mercedes-Benz SL550, SL63 AMG, SL65 AMG, SL600, SL55 AMG, and SL500 vehicles.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384333959349,"sku":"CNJW-331269","price":38.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331269_Fro_946a9cbc-4a23-48f2-988d-60247261022c.jpg?v=1774702566"},{"product_id":"ate-331312-brake-hydraulic-hose","title":"ATE 331312 Brake Hydraulic Hose - Rear","description":"\u003ch2\u003eOverview of ATE Original Brake Hydraulic Hose 331312\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331312 is designed for reliable brake fluid transfer in select Mercedes-Benz models. This brake hydraulic hose ensures consistent brake performance without including mounting hardware or brackets, making it suitable for professional installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz E400, E550, C250, C350, C63 AMG, GLK250, GLK350, C300, E350, SL550, SL63 AMG, SL65 AMG, SL600, SL55 AMG, CL65 AMG, and SL500\u003c\/li\u003e\n\u003cli\u003ePart number 331312 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eBrake hydraulic hose without mounting hardware included\u003c\/li\u003e\n\u003cli\u003eNo bracket included, designed for direct replacement\u003c\/li\u003e\n\u003cli\u003eGTIN 04006633389709 for product verification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering components that meet strict OEM standards for brake system integrity. This product line emphasizes durability and compatibility, providing brake hydraulic hoses engineered to maintain proper fluid pressure and resist wear under demanding conditions. The 331312 hose is part of this line, ensuring it meets the quality and performance expectations for Mercedes-Benz vehicles.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331312 is engineered to facilitate the transfer of brake fluid within the hydraulic brake system of various Mercedes-Benz models. It is manufactured to precise specifications to ensure a secure and leak-free connection. This hose does not include mounting hardware or brackets, which allows for flexibility in installation depending on the vehicle’s existing components. The absence of these accessories means installers should verify compatibility with the vehicle’s current brake system setup before replacement.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses in Mercedes-Benz E400 and E550 models\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose deterioration in C250 and C350 vehicles\u003c\/li\u003e\n\u003cli\u003eAddressing brake pressure inconsistencies in performance models like the C63 AMG and SL63 AMG\u003c\/li\u003e\n\u003cli\u003eUpgrading aging brake lines in GLK250 and GLK350 for improved system reliability\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity in luxury models such as SL600 and CL65 AMG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the vehicle is securely lifted and supported before beginning brake system work\u003c\/li\u003e\n\u003cli\u003eVerify that the existing mounting hardware and brackets are in good condition, as this hose does not include them\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after installation to remove air and ensure proper brake function\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damaging the hose fittings during installation\u003c\/li\u003e\n\u003cli\u003eConsult the vehicle’s service manual for torque specifications and installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 331312 to meet stringent quality standards consistent with OEM requirements. While specific warranty details are not provided, ATE products typically undergo rigorous testing to ensure durability and performance. Buyers should confirm warranty coverage with the distributor or installer prior to purchase.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384334123189,"sku":"CNJW-331312","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331312_Fro_40497db0-f559-4032-a48f-689d6bd1e768.jpg?v=1774702566"},{"product_id":"ate-331313-brake-hydraulic-hose","title":"ATE 331313 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Saab 9-5\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331313 is designed specifically for the Saab 9-5, providing a dependable connection within the brake hydraulic system. This hose ensures consistent brake fluid flow without mounting hardware or brackets included, allowing for straightforward integration with existing components.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Brake Hydraulic Hose 331313\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Saab 9-5 models\u003c\/li\u003e\n\u003cli\u003ePart number 331313 for precise identification\u003c\/li\u003e\n\u003cli\u003eNo mounting hardware included\u003c\/li\u003e\n\u003cli\u003eNo bracket included\u003c\/li\u003e\n\u003cli\u003eManufactured under the ATE Original Brake Hydraulic Hose product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake hoses engineered to meet OEM specifications. This product line emphasizes durability and reliable hydraulic performance, ensuring that each hose maintains proper brake fluid pressure and resists wear over time. The 331313 hose is part of this line, tailored for the Saab 9-5 to maintain system integrity without additional mounting components.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331313 is a critical component in the brake system of the Saab 9-5. It facilitates the transfer of brake fluid from the master cylinder to the brake calipers, enabling effective braking response. This hose is designed without mounting hardware or brackets, which means it is intended to be used with the existing fittings and supports on the vehicle. Its construction meets stringent quality standards to ensure resistance to pressure, temperature variations, and brake fluid compatibility.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks in the hydraulic system\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake fluid pressure and flow\u003c\/li\u003e\n\u003cli\u003eEliminating brake system sponginess caused by hose failure\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system safety and reliability on Saab 9-5\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 331313 on a Saab 9-5, ensure that the existing mounting hardware and brackets are in good condition, as this hose does not include these components. Properly secure the hose to prevent movement or abrasion against other parts. Bleed the brake system thoroughly after installation to remove any air and verify brake fluid pressure for optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 331313 to meet strict quality and safety standards. While specific warranty details are not provided, ATE products typically adhere to OEM-level durability and reliability requirements, ensuring consistent performance in the Saab 9-5 brake system.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384334287029,"sku":"CNJW-331313","price":42.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331313_Dia_d3d655ab-7f55-41c1-a329-f3414c9dc528.jpg?v=1774702566"},{"product_id":"ate-331320-brake-hydraulic-hose","title":"ATE 331320 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Porsche 968 and 944\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331320 is designed specifically for Porsche 968 and 944 models, ensuring precise fitment and dependable brake fluid transfer. This brake hydraulic hose is engineered to meet the rigorous demands of your vehicle's braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Original Brake Hydraulic Hose 331320\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Porsche 968 and 944 models\u003c\/li\u003e\n\u003cli\u003ePart number 331320 for exact identification\u003c\/li\u003e\n\u003cli\u003eBrake hydraulic hose designed for fluid transfer in braking systems\u003c\/li\u003e\n\u003cli\u003eNo mounting hardware included\u003c\/li\u003e\n\u003cli\u003eNo bracket included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the ATE Original Brake Hydraulic Hose\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331320 is part of the ATE Original Brake Hydraulic Hose product line, known for delivering components that meet original equipment specifications. This hose is manufactured to provide reliable brake fluid conveyance under high pressure and temperature conditions typical in Porsche 968 and 944 braking systems. The absence of mounting hardware and brackets means this hose is intended for direct replacement where existing fittings and brackets are reused, ensuring a straightforward installation process for technicians familiar with these Porsche models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses on Porsche 968 and 944\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake pressure and pedal feel\u003c\/li\u003e\n\u003cli\u003ePreventing brake system failure due to hose damage\u003c\/li\u003e\n\u003cli\u003eMaintaining safety and performance in hydraulic brake lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the ATE Original Brake Hydraulic Hose 331320, ensure that the existing mounting hardware and brackets are inspected for wear or damage since they are not included with this part. Properly secure the hose to prevent movement or abrasion against other components. Bleed the brake system thoroughly after installation to remove any air and verify brake system integrity before driving.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eATE manufactures the Original Brake Hydraulic Hose 331320 to meet strict quality standards aligned with original equipment requirements. While specific warranty details are not provided, ATE products typically undergo rigorous testing to ensure durability and performance in demanding automotive environments.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384334680245,"sku":"CNJW-331320","price":46.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331320_Dia_25ef9a42-d860-4536-8222-22922939defd.jpg?v=1774702567"},{"product_id":"ate-331462-brake-hydraulic-hose","title":"ATE 331462 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Audi Allroad Quattro\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331462 is designed specifically for the Audi Allroad Quattro, ensuring precise fitment and dependable brake performance. This brake hydraulic hose is engineered to meet the rigorous demands of your vehicle's braking system without including mounting hardware or brackets.\u003c\/p\u003e\u003ch2\u003eKey Features of ATE Brake Hydraulic Hose 331462\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Audi Allroad Quattro models\u003c\/li\u003e\n\u003cli\u003ePart number 331462 for exact replacement\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included for flexible installation options\u003c\/li\u003e\n\u003cli\u003eNo bracket included, designed for direct hose replacement\u003c\/li\u003e\n\u003cli\u003eManufactured under the ATE Original Brake Hydraulic Hose product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the ATE Original Brake Hydraulic Hose Product Line\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose line focuses on delivering high-quality brake hoses that meet OEM specifications. This product line emphasizes durability and precise fitment, providing reliable hydraulic fluid transfer within the brake system. The 331462 hose is part of this line, ensuring compatibility and performance tailored for the Audi Allroad Quattro.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331462 is engineered to maintain the integrity of your Audi Allroad Quattro's braking system. It facilitates the transfer of brake fluid under pressure, ensuring consistent brake response. This hose is designed without mounting hardware or brackets, allowing for straightforward replacement where existing components are reused. Its construction meets stringent quality standards to withstand the pressures and temperatures typical in brake systems.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hydraulic Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks due to worn or damaged hoses\u003c\/li\u003e\n\u003cli\u003eReduced brake responsiveness caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eSwelling or cracking of old brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eBrake system failure risks from compromised hose integrity\u003c\/li\u003e\n\u003cli\u003eReplacement of OEM brake hydraulic hose for maintenance or repair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the brake system is depressurized before removal\u003c\/li\u003e\n\u003cli\u003eReuse existing mounting hardware and brackets as this hose does not include them\u003c\/li\u003e\n\u003cli\u003eInspect surrounding brake components during installation\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after hose replacement to remove air\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Audi Allroad Quattro before installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe ATE Original Brake Hydraulic Hose 331462 is manufactured to meet OEM quality standards, ensuring reliable performance and safety. While mounting hardware and brackets are not included, the hose itself undergoes rigorous testing for durability and pressure resistance. Warranty details should be confirmed with the parts provider or manufacturer.\u003c\/p\u003e","brand":"ATE","offers":[{"title":"Default Title","offer_id":43384334844085,"sku":"CNJW-331462","price":20.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AE_331462_Dia.jpg?v=1774702567"},{"product_id":"beck-arnley-073-0150-brake-hydraulic-hose","title":"Beck Arnley 073-0150 Brake Hydraulic Hose - Front or Rear","description":"\u003ch2\u003eReliable Beck Arnley Brake Hydraulic Hose 073-0150\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-0150 brake hydraulic hose is designed to provide dependable brake fluid transfer for a variety of vehicle applications. Engineered to meet OEM specifications, this brake hose ensures consistent performance and safety for your braking system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeets or exceeds OEM standards for brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eDurable construction resists wear, corrosion, and high pressure\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple vehicle makes and models requiring part number 073-0150\u003c\/li\u003e\n\u003cli\u003ePrecision fitment ensures leak-free brake fluid transfer\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality fittings for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley brake hydraulic hose 073-0150 is manufactured with reinforced materials to withstand the high pressure and temperature conditions typical in brake systems. This hose is designed to maintain flexibility while resisting expansion under pressure, which helps preserve brake pedal feel and responsiveness. The part number 073-0150 corresponds to a specific fitment range, making it suitable for vehicles that require this exact replacement hose. While the product does not specify exact vehicle makes and models, it is commonly used in applications where a reliable brake hydraulic hose is necessary to maintain braking system integrity.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eSolves issues related to brake fluid leaks and pressure loss\u003c\/li\u003e\n\u003cli\u003eAddresses brake pedal softness caused by hose expansion\u003c\/li\u003e\n\u003cli\u003ePrevents contamination of brake fluid from external elements\u003c\/li\u003e\n\u003cli\u003eRestores proper brake system function after damage or wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-0150 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, taking care to avoid brake fluid spillage. Inspect fittings and brake lines for damage before installing the new hose. Use appropriate tools to tighten fittings to manufacturer torque specifications to prevent leaks. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal feel and operation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-0150 brake hydraulic hose to meet stringent quality standards, ensuring durability and performance. The product is backed by Beck Arnley’s limited warranty against defects in materials and workmanship, providing confidence in its reliability for brake system repairs.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388324774069,"sku":"BBGB-073-0150","price":17.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0730150_Oth.jpg?v=1774710810"},{"product_id":"beck-arnley-073-0168-brake-hydraulic-hose","title":"Beck Arnley 073-0168 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Beck Arnley Brake Hydraulic Hose 073-0168\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-0168 brake hydraulic hose is designed to provide dependable brake fluid transfer for a variety of vehicle applications. This component ensures consistent brake performance and safety by maintaining proper hydraulic pressure within the braking system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDurable construction for long-lasting service life\u003c\/li\u003e\n\u003cli\u003ePrecision-engineered to meet OEM specifications\u003c\/li\u003e\n\u003cli\u003eResistant to heat, abrasion, and corrosion\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple vehicle makes and models\u003c\/li\u003e\n\u003cli\u003eIncludes part number 073-0168 for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of Beck Arnley Brake Hydraulic Hose\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley brake hydraulic hose 073-0168 is manufactured to strict quality standards, ensuring it withstands the demanding conditions of brake system operation. This hose is engineered to handle high hydraulic pressure and temperature fluctuations, which are common in braking systems. Its robust design helps prevent leaks and maintains brake fluid integrity, contributing to consistent brake pedal feel and vehicle safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eEliminates brake fluid leaks that cause reduced braking efficiency\u003c\/li\u003e\n\u003cli\u003ePrevents hose swelling or bursting under pressure\u003c\/li\u003e\n\u003cli\u003eRestores proper brake pedal responsiveness\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to corrosion or abrasion damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your vehicle’s make and model before installation\u003c\/li\u003e\n\u003cli\u003eInspect brake lines and fittings for damage during replacement\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damaging hose fittings\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after installation to remove air\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley brake hydraulic hose 073-0168 is backed by rigorous quality control processes to meet or exceed OEM standards. While specific warranty details may vary, Beck Arnley products typically include coverage against manufacturing defects to provide confidence in durability and performance.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388324806837,"sku":"BBGB-073-0168","price":20.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0730168_Oth.jpg?v=1774710810"},{"product_id":"beck-arnley-073-0879-brake-hydraulic-hose","title":"Beck Arnley 073-0879 Brake Hydraulic Hose - Front or Rear","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Mazda and Nissan Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-0879 brake hydraulic hose is designed to provide dependable brake fluid transfer for select Mazda and Nissan models. Engineered to meet OEM specifications, this hose ensures consistent brake performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mazda RX-7 and Nissan 200SX, 280ZX, 510, 810, and Maxima models\u003c\/li\u003e\n\u003cli\u003eDurable construction resists wear, corrosion, and high pressure\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds original equipment standards for fit and function\u003c\/li\u003e\n\u003cli\u003eIncludes part number 073-0879 for precise identification\u003c\/li\u003e\n\u003cli\u003eDesigned for direct replacement to maintain brake system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose from Beck Arnley is specifically engineered for use in various Mazda and Nissan vehicles, including the Mazda RX-7 and Nissan 200SX, 280ZX, 510, 810, and Maxima. The hose facilitates the transfer of brake fluid under pressure from the master cylinder to the brake calipers or wheel cylinders, ensuring reliable braking response. With part number 073-0879, this component matches the original equipment specifications for length, fittings, and material quality, providing a precise fit and long service life.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eAddressing soft or spongy brake pedal feel due to hose damage\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system pressure for consistent stopping power\u003c\/li\u003e\n\u003cli\u003ePreventing brake failure from hose rupture or swelling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-0879 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use proper tools to disconnect fittings without damaging threads. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal feel. Inspect all connections for leaks before road testing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures this brake hydraulic hose to meet stringent quality standards, ensuring durability and performance consistent with original equipment. The part is backed by Beck Arnley's warranty coverage, which protects against defects in materials and workmanship under normal use. This provides confidence in the reliability and safety of the replacement hose for your Mazda or Nissan vehicle.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388324839605,"sku":"BBGB-073-0879","price":16.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0730879_Oth.jpg?v=1774710812"},{"product_id":"beck-arnley-073-0975-brake-hydraulic-hose","title":"Beck Arnley 073-0975 Brake Hydraulic Hose - Rear","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volkswagen Beetle\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-0975 brake hydraulic hose is designed specifically for Volkswagen Beetle models, ensuring precise fitment and dependable brake performance. This component is essential for maintaining the integrity of your vehicle's braking system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volkswagen Beetle models\u003c\/li\u003e\n\u003cli\u003ePart number 073-0975 for accurate identification\u003c\/li\u003e\n\u003cli\u003eConstructed to meet OEM specifications\u003c\/li\u003e\n\u003cli\u003eDurable materials resist wear and corrosion\u003c\/li\u003e\n\u003cli\u003eEnsures proper hydraulic pressure transmission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Construction and Precise Fitment\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose from Beck Arnley is engineered to match the exact requirements of Volkswagen Beetle vehicles. Manufactured with high-quality materials, it withstands the pressures and temperatures typical in brake systems. The hose maintains flexibility while providing a secure connection between brake components, helping to prevent leaks and maintain consistent brake fluid flow. Using part number 073-0975 guarantees compatibility and performance aligned with factory standards.\u003c\/p\u003e\u003ch2\u003ePurpose and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged brake hydraulic hoses on Volkswagen Beetle\u003c\/li\u003e\n\u003cli\u003eAddresses brake fluid leaks caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eRestores proper hydraulic pressure for effective braking\u003c\/li\u003e\n\u003cli\u003ePrevents brake system failure due to hose cracks or bulges\u003c\/li\u003e\n\u003cli\u003eMaintains safety and reliability of the vehicle's braking system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-0975 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Inspect fittings and connectors for damage before attaching the new hose. After installation, bleed the brake system thoroughly to remove air and verify proper brake function. Use appropriate tools to avoid damaging the hose or fittings during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures this brake hydraulic hose to meet or exceed OEM standards, providing reliable performance for Volkswagen Beetle vehicles. The part number 073-0975 undergoes rigorous quality control to ensure durability and safety. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, supporting long-term vehicle maintenance.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325003445,"sku":"BBGB-073-0975","price":18.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0730975_Oth.jpg?v=1774710814"},{"product_id":"beck-arnley-073-1076-brake-hydraulic-hose","title":"Beck Arnley 073-1076 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volkswagen Vanagon\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1076 brake hydraulic hose is designed specifically for Volkswagen Vanagon models. This component ensures consistent brake fluid transfer, maintaining the integrity of your vehicle's braking system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volkswagen Vanagon brake systems\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM specifications\u003c\/li\u003e\n\u003cli\u003ePart number 073-1076 for precise fitment\u003c\/li\u003e\n\u003cli\u003eEngineered to withstand high pressure and temperature\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1076 brake hydraulic hose is manufactured to provide a direct replacement for the original part on Volkswagen Vanagon vehicles. It is built with quality materials that resist wear, corrosion, and cracking, ensuring reliable brake fluid flow under demanding conditions. This hose is engineered to handle the hydraulic pressure generated during braking, contributing to safe and responsive brake performance. The part number 073-1076 corresponds to a hose that fits the specific routing and connection points of the Vanagon brake system, facilitating straightforward installation without modifications.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Resolution\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose is used to transfer brake fluid from the master cylinder to the brake calipers or wheel cylinders. It is essential for maintaining hydraulic pressure in the braking system. Common issues addressed by replacing this hose include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eSoft or spongy brake pedal feel caused by hose expansion\u003c\/li\u003e\n\u003cli\u003eCracks or damage from age and environmental exposure\u003c\/li\u003e\n\u003cli\u003eBrake system failure risks from compromised hoses\u003c\/li\u003e\n\u003cli\u003eCorrosion or abrasion damage affecting hose integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1076 brake hydraulic hose on a Volkswagen Vanagon, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Inspect fittings and clean connection points before attaching the new hose. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal feel. Use appropriate tools to avoid damaging fittings and ensure a secure, leak-free connection.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 073-1076 brake hydraulic hose undergoes rigorous quality control to ensure fitment accuracy and material integrity. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, supporting confidence in the product's reliability for Volkswagen Vanagon brake system maintenance.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325134517,"sku":"BBGB-073-1076","price":16.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731076_Oth.jpg?v=1774710816"},{"product_id":"beck-arnley-073-1109-brake-hydraulic-hose","title":"Beck Arnley 073-1109 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Mercedes-Benz Models\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1109 brake hydraulic hose is designed specifically for select Mercedes-Benz vehicles, including the 300D, 300SD, 300SEL, and 380SL. This component ensures consistent brake fluid transfer, maintaining safe and responsive braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz 300D, 300SD, 300SEL, and 380SL models\u003c\/li\u003e\n\u003cli\u003eOEM-quality brake hydraulic hose for precise fit and function\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand high pressure and temperature variations\u003c\/li\u003e\n\u003cli\u003ePart number 073-1109 for accurate identification and replacement\u003c\/li\u003e\n\u003cli\u003eEngineered to meet or exceed original equipment specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1109 brake hydraulic hose is manufactured to provide reliable fluid transfer within the brake system of Mercedes-Benz vehicles. This hose is constructed from high-grade materials that resist wear, corrosion, and cracking, ensuring long service life. Designed to match the original equipment dimensions and fittings, it offers a direct replacement solution for the 300D, 300SD, 300SEL, and 380SL models. The part number 073-1109 helps ensure compatibility and ease of ordering for maintenance or repair tasks.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose is used to maintain proper brake fluid flow between the master cylinder and brake calipers or wheel cylinders. It is essential for safe braking operation and helps resolve issues such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks caused by cracked or worn hoses\u003c\/li\u003e\n\u003cli\u003eReduced brake responsiveness due to hose swelling or internal damage\u003c\/li\u003e\n\u003cli\u003eBrake system pressure loss affecting stopping power\u003c\/li\u003e\n\u003cli\u003eCorrosion or deterioration from exposure to road elements\u003c\/li\u003e\n\u003cli\u003eReplacement during routine brake system maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1109 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use proper tools to prevent damage to fittings and connectors. After installation, bleed the brake system thoroughly to remove air and verify proper brake function before driving.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1109 brake hydraulic hose to meet stringent quality standards, ensuring durability and performance consistent with original equipment. While specific warranty details may vary, Beck Arnley products typically come with a limited warranty covering defects in materials and workmanship. Consult product documentation or authorized sources for exact warranty terms.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325200053,"sku":"BBGB-073-1109","price":18.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731109_Oth.jpg?v=1774710817"},{"product_id":"beck-arnley-073-1128-brake-hydraulic-hose","title":"Beck Arnley 073-1128 Brake Hydraulic Hose - Rear","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Various Vehicle Applications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1128 brake hydraulic hose is designed to provide dependable brake fluid transfer for safe and consistent braking performance. This brake hose is engineered to meet or exceed OEM specifications, ensuring compatibility with a range of vehicle makes and models requiring a durable hydraulic brake line.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed with high-quality materials for durability and resistance to wear\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM standards for fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to handle high brake fluid pressure without leaks\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple vehicle makes and models requiring part number 073-1128\u003c\/li\u003e\n\u003cli\u003eIncludes precise fittings for secure installation and reliable brake system performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1128 brake hydraulic hose is manufactured to provide a direct replacement for original brake lines. Its robust construction includes reinforced layers to withstand heat, pressure, and environmental exposure common in brake system components. This hose ensures consistent brake fluid flow, which is critical for maintaining proper brake pedal feel and stopping power. While the product does not specify exact vehicle fitments, it is commonly used in applications where the 073-1128 part number is required, including various domestic and import models.\u003c\/p\u003e\u003ch2\u003eCommon Uses and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eElimination of brake fluid leaks caused by damaged lines\u003c\/li\u003e\n\u003cli\u003eRestoration of proper brake pressure and pedal response\u003c\/li\u003e\n\u003cli\u003ePrevention of brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eAddressing brake line swelling or bulging under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1128 brake hydraulic hose, ensure the brake system is fully depressurized and the vehicle is securely lifted. Use proper tools to avoid damaging fittings and always replace brake fluid after installation to remove air from the system. Verify compatibility with your vehicle’s make and model by cross-referencing the part number. Proper torque specifications should be followed to prevent leaks.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley products are manufactured to meet stringent quality standards, ensuring reliable performance and safety. The 073-1128 brake hydraulic hose undergoes rigorous testing to comply with industry requirements. While specific warranty details are not provided here, Beck Arnley typically offers limited warranties covering defects in materials and workmanship. Consult product documentation or authorized sources for exact warranty terms.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325232821,"sku":"BBGB-073-1128","price":19.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731128_Oth.jpg?v=1774710818"},{"product_id":"beck-arnley-073-1195-brake-hydraulic-hose","title":"Beck Arnley 073-1195 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Beck Arnley Brake Hydraulic Hose 073-1195\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1195 brake hydraulic hose is engineered to provide dependable brake fluid transfer for a variety of vehicle makes and models. Designed to meet or exceed OEM specifications, this brake hose ensures consistent braking performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDurable construction for long-lasting service life\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM standards for fit and function\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple vehicle makes and models requiring brake hydraulic hose replacement\u003c\/li\u003e\n\u003cli\u003ePart number 073-1195 ensures precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eResistant to brake fluid and environmental factors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1195 brake hydraulic hose is manufactured with high-quality materials designed to withstand the pressures and temperatures typical in brake systems. This hose facilitates the transfer of brake fluid from the master cylinder to the brake calipers or wheel cylinders, maintaining hydraulic pressure for effective braking. Its construction includes reinforced layers to resist expansion and deterioration, ensuring consistent brake pedal feel and vehicle control.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose is compatible with a range of vehicle makes and models that require a replacement brake hose matching part number 073-1195. It is suitable for drivers seeking a reliable replacement part that maintains factory performance standards. Always verify fitment with your vehicle’s specifications before installation.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Brake Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks caused by cracked or worn hoses\u003c\/li\u003e\n\u003cli\u003eReduced braking efficiency due to hose expansion under pressure\u003c\/li\u003e\n\u003cli\u003eBrake pedal sponginess resulting from internal hose damage\u003c\/li\u003e\n\u003cli\u003eCorrosion or damage from exposure to road debris and chemicals\u003c\/li\u003e\n\u003cli\u003ePreventative maintenance to avoid brake system failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1195 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake system. Use proper tools to avoid damaging fittings and ensure all connections are tightened to manufacturer torque specifications. After installation, bleed the brake system thoroughly to remove air and verify proper brake function before driving.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1195 brake hydraulic hose to meet stringent quality standards, ensuring reliable performance and durability. While specific warranty details may vary, Beck Arnley products typically come with a limited warranty against defects in materials and workmanship. Consult product documentation or your supplier for exact warranty terms.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325298357,"sku":"BBGB-073-1195","price":18.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731195_Oth.jpg?v=1774710823"},{"product_id":"beck-arnley-073-1346-brake-hydraulic-hose","title":"Beck Arnley 073-1346 Brake Hydraulic Hose - Rear or Rear Right","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Lexus Camry and Toyota ES300\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1346 brake hydraulic hose is designed specifically for Lexus Camry and Toyota ES300 models. This component ensures proper brake fluid transfer, maintaining safe and responsive braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus Camry and Toyota ES300 vehicles\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting brake fluid containment\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM specifications for fit and function\u003c\/li\u003e\n\u003cli\u003ePart number 073-1346 ensures precise replacement\u003c\/li\u003e\n\u003cli\u003eEngineered to withstand high pressure and temperature variations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1346 brake hydraulic hose is manufactured to provide a direct fit replacement for the brake system of Lexus Camry and Toyota ES300 models. This hose is built to handle the hydraulic pressure generated during braking, ensuring consistent fluid flow without leaks or failures. Its robust design resists wear from heat, vibration, and exposure to brake fluid, contributing to vehicle safety and reliability. Using the correct brake hydraulic hose like the 073-1346 helps maintain the integrity of the braking system and supports optimal stopping power.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eEliminates brake fluid leaks that cause reduced braking efficiency\u003c\/li\u003e\n\u003cli\u003eAddresses brake pedal softness or sponginess due to hose failure\u003c\/li\u003e\n\u003cli\u003ePrevents brake system contamination from damaged hose materials\u003c\/li\u003e\n\u003cli\u003eRestores proper hydraulic pressure for consistent brake response\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1346 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use appropriate tools to prevent damage to fittings and connectors. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal feel. Confirm compatibility with Lexus Camry and Toyota ES300 models before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley brake hydraulic hoses are manufactured to meet strict quality standards, ensuring reliable performance and durability. The 073-1346 part undergoes rigorous testing to comply with OEM requirements. This product typically includes a limited warranty covering defects in materials and workmanship, providing confidence in its long-term use on Lexus Camry and Toyota ES300 vehicles.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325396661,"sku":"BBGB-073-1346","price":22.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731346_Oth_94d4429d-804c-49ea-822b-feaf73d75d6e.jpg?v=1774710827"},{"product_id":"beck-arnley-073-1389-brake-hydraulic-hose","title":"Beck Arnley 073-1389 Brake Hydraulic Hose - Rear","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Honda Civic and Civic del Sol\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1389 brake hydraulic hose is designed specifically for Honda Civic and Civic del Sol models. This component ensures consistent brake fluid transfer, maintaining optimal braking performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Civic and Civic del Sol models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting brake fluid transfer\u003c\/li\u003e\n\u003cli\u003eOEM-quality fit and function\u003c\/li\u003e\n\u003cli\u003ePart number 073-1389 for precise identification\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds original equipment specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1389 brake hydraulic hose is engineered to provide a direct replacement for the original brake hose on Honda Civic and Civic del Sol vehicles. Manufactured with high-quality materials, this hose resists wear, corrosion, and pressure fluctuations to maintain reliable brake fluid flow. Its precise fitment ensures easy installation without modifications, preserving the integrity of the vehicle's braking system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eEliminates brake fluid leaks caused by hose damage\u003c\/li\u003e\n\u003cli\u003eRestores proper brake pedal feel and responsiveness\u003c\/li\u003e\n\u003cli\u003ePrevents brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to brake fluid contamination or hose swelling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle compatibility with Honda Civic or Civic del Sol models before installation\u003c\/li\u003e\n\u003cli\u003eInspect brake lines and fittings for damage during replacement\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damaging fittings or hose ends\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after installation to remove air\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley brake hydraulic hoses, including part number 073-1389, are manufactured to meet or exceed OEM standards. Each hose undergoes rigorous quality control to ensure durability and performance. While specific warranty details may vary, Beck Arnley products typically include a limited warranty against defects in materials and workmanship, providing confidence in the product's reliability.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325527733,"sku":"BBGB-073-1389","price":17.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731389_Oth.jpg?v=1774710828"},{"product_id":"beck-arnley-073-1394-brake-hydraulic-hose","title":"Beck Arnley 073-1394 Brake Hydraulic Hose - Front Left","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Acura, Honda, and Isuzu Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1394 brake hydraulic hose is designed to provide dependable brake fluid transfer for select Acura, Honda, and Isuzu models. Engineered to meet OEM specifications, this hose ensures consistent braking performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura Accord and CL models\u003c\/li\u003e\n\u003cli\u003eFits Honda Odyssey and Oasis vehicles\u003c\/li\u003e\n\u003cli\u003eDesigned for Isuzu models requiring this specific brake hydraulic hose\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM standards for durability and performance\u003c\/li\u003e\n\u003cli\u003ePart number 073-1394 ensures precise fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose from Beck Arnley is manufactured to provide a secure and leak-free connection within the brake system. It is specifically compatible with Acura Accord and CL, Honda Odyssey and Oasis, and certain Isuzu models, making it a suitable replacement part for these vehicles. The part number 073-1394 corresponds to the exact specifications required for these applications, ensuring proper fitment and reliable operation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eAddresses brake fluid leaks that compromise braking efficiency\u003c\/li\u003e\n\u003cli\u003eResolves issues related to soft or spongy brake pedal feel\u003c\/li\u003e\n\u003cli\u003ePrevents brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eMaintains consistent hydraulic pressure for safe braking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1394 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use proper tools to avoid damage to fittings and connectors. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal feel and function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures this brake hydraulic hose to meet strict quality standards, ensuring durability and performance consistent with OEM requirements. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, providing confidence in the product's reliability for Acura, Honda, and Isuzu brake system repairs.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325560501,"sku":"BBGB-073-1394","price":27.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731394_Oth.jpg?v=1774710829"},{"product_id":"beck-arnley-073-1421-brake-hydraulic-hose","title":"Beck Arnley 073-1421 Brake Hydraulic Hose - Front Left","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Honda Civic and Civic del Sol\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1421 brake hydraulic hose is designed specifically for Honda Civic and Civic del Sol models. This component ensures consistent brake fluid transfer, maintaining optimal braking performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Civic and Civic del Sol models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting brake fluid transfer\u003c\/li\u003e\n\u003cli\u003eOEM-quality fit and function for precise installation\u003c\/li\u003e\n\u003cli\u003ePart number 073-1421 for accurate identification\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted automotive parts brand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1421 brake hydraulic hose is engineered to meet or exceed original equipment specifications for Honda Civic and Civic del Sol vehicles. This brake hose is constructed from high-quality materials that resist wear, corrosion, and pressure fluctuations, ensuring reliable brake fluid delivery under various driving conditions. Its precise fitment reduces the risk of leaks and brake failure, contributing to vehicle safety and performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or cracked brake hydraulic hoses on Honda Civic and Civic del Sol\u003c\/li\u003e\n\u003cli\u003eAddresses brake fluid leaks caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003eRestores proper brake pressure and pedal feel\u003c\/li\u003e\n\u003cli\u003ePrevents brake system failure due to hose damage\u003c\/li\u003e\n\u003cli\u003eImproves overall braking system reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Beck Arnley 073-1421 brake hydraulic hose should be performed by a qualified technician. Ensure the brake system is properly bled after installation to remove air and maintain brake responsiveness. Verify compatibility with your specific Honda Civic or Civic del Sol model year before installation. Use appropriate tools to avoid damage to fittings and connections.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet strict quality standards, providing reliable performance and durability. The 073-1421 brake hydraulic hose comes with a limited warranty against defects in materials and workmanship, offering peace of mind for your vehicle maintenance needs.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325593269,"sku":"BBGB-073-1421","price":29.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731421_Oth.jpg?v=1774710830"},{"product_id":"beck-arnley-073-1434-brake-hydraulic-hose","title":"Beck Arnley 073-1434 Brake Hydraulic Hose - Rear, Rear Lower or Rear Upper","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Acura and Honda Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1434 brake hydraulic hose is designed to provide dependable brake fluid transfer for Acura and Honda models. Engineered to meet OEM specifications, this hose ensures consistent braking performance for your Accord, CL, or TL.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura Accord, CL, and TL models\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM standards for brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eDurable construction resists wear, corrosion, and brake fluid exposure\u003c\/li\u003e\n\u003cli\u003ePart number 073-1434 ensures precise fit and function\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive replacement parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1434 brake hydraulic hose is engineered to maintain the integrity of your vehicle's braking system by providing a secure and flexible conduit for brake fluid. This hose is constructed with high-quality materials that resist expansion and degradation, ensuring consistent hydraulic pressure and reliable brake response. Designed specifically for Acura and Honda vehicles, including the Accord, CL, and TL, this hose matches the original equipment fit and performance requirements. The part number 073-1434 corresponds to a direct replacement, simplifying installation and maintaining system safety.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose damage\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake pedal feel and hydraulic pressure\u003c\/li\u003e\n\u003cli\u003ePreventing brake failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity on Acura Accord, CL, and TL models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1434 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use appropriate tools to prevent damage to fittings and connectors. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal operation. Always follow manufacturer torque specifications for fittings to ensure a secure and leak-free connection.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1434 brake hydraulic hose to meet strict quality standards, ensuring durability and performance consistent with original equipment. This part undergoes rigorous testing to verify fit, function, and material integrity. While specific warranty terms may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, providing confidence in the reliability of this brake hydraulic hose for Acura and Honda vehicles.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325691573,"sku":"BBGB-073-1434","price":25.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731434_Oth.jpg?v=1774710831"},{"product_id":"beck-arnley-073-1457-brake-hydraulic-hose","title":"Beck Arnley 073-1457 Brake Hydraulic Hose - Front Right","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Acura and Honda Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1457 brake hydraulic hose is designed to provide dependable brake fluid transfer for Acura and Honda models. Engineered to meet OEM specifications, this hose ensures consistent brake performance for vehicles like the Honda Civic, Civic del Sol, and Acura Integra.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura and Honda Civic, Civic del Sol, and Integra models\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM standards for brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eDurable construction resists wear, corrosion, and brake fluid exposure\u003c\/li\u003e\n\u003cli\u003ePart number 073-1457 ensures precise fit and function\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive replacement parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1457 brake hydraulic hose is engineered to maintain the integrity of your vehicle's braking system by providing a secure and flexible conduit for brake fluid. This hose is constructed with high-quality materials that resist expansion and degradation under high pressure and temperature conditions. Designed specifically for Acura and Honda vehicles, including the Civic, Civic del Sol, and Integra, it ensures a proper fit and reliable brake response. The part number 073-1457 corresponds to a direct replacement hose that matches factory dimensions and connection points, facilitating straightforward installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose damage\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake pressure and pedal feel\u003c\/li\u003e\n\u003cli\u003ePreventing brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eMaintaining safety and performance in Acura and Honda brake systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1457 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Inspect fittings and connectors for damage before attaching the new hose. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal firmness. Use appropriate tools to avoid damaging the hose or fittings during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1457 brake hydraulic hose to meet strict quality standards, ensuring durability and performance consistent with OEM requirements. This part undergoes rigorous testing to verify material integrity and fitment accuracy. While specific warranty terms may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, providing confidence in the product's reliability for Acura and Honda brake systems.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325789877,"sku":"BBGB-073-1457","price":31.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731457_Oth.jpg?v=1774710832"},{"product_id":"beck-arnley-073-1499-brake-hydraulic-hose","title":"Beck Arnley 073-1499 Brake Hydraulic Hose - Front Right","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Chevrolet, Geo, and Toyota Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1499 brake hydraulic hose is designed to provide dependable brake fluid transfer for select Chevrolet, Geo, and Toyota models. Engineered to meet OEM specifications, this hose ensures consistent braking performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet, Geo, and Toyota vehicles including Corolla and Prizm models\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand high brake fluid pressure and temperature variations\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM standards for fit and function\u003c\/li\u003e\n\u003cli\u003ePart number 073-1499 ensures precise replacement and compatibility\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive brake components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose, part number 073-1499, is specifically designed for use in Chevrolet, Geo, and Toyota vehicles, including the Toyota Corolla and Geo Prizm. The hose facilitates the transfer of brake fluid from the master cylinder to the brake calipers or wheel cylinders, maintaining hydraulic pressure essential for effective braking. Its construction uses high-quality materials to resist wear, corrosion, and heat, ensuring long service life and reliable braking response.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or cracked brake hydraulic hoses causing brake fluid leaks\u003c\/li\u003e\n\u003cli\u003eRestores proper brake fluid pressure for consistent pedal feel and braking power\u003c\/li\u003e\n\u003cli\u003eAddresses brake system issues related to hose swelling or internal damage\u003c\/li\u003e\n\u003cli\u003ePrevents brake failure due to compromised hydraulic lines\u003c\/li\u003e\n\u003cli\u003eEnsures safe operation by maintaining brake system integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1499 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use proper tools to avoid damaging fittings and ensure all connections are tightened to manufacturer torque specifications. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal feel before driving.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley brake hydraulic hoses are manufactured to meet strict quality standards, ensuring reliable performance and durability. While specific warranty details may vary, Beck Arnley products typically come with a limited warranty against defects in materials and workmanship. This provides added confidence in the longevity and safety of the brake hydraulic hose for Chevrolet, Geo, and Toyota vehicles.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325855413,"sku":"BBGB-073-1499","price":21.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731499_Oth.jpg?v=1774710835"},{"product_id":"beck-arnley-073-1501-brake-hydraulic-hose","title":"Beck Arnley 073-1501 Brake Hydraulic Hose - Rear","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Chevrolet, Geo, and Toyota Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1501 brake hydraulic hose is designed to provide dependable brake fluid transfer for select Chevrolet, Geo, and Toyota models. Engineered to meet OE specifications, this hose ensures consistent braking performance and safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet, Geo, and Toyota models including Celica, Corolla, Matrix, and Prizm\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds original equipment standards for brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eDurable construction resists wear, corrosion, and brake fluid exposure\u003c\/li\u003e\n\u003cli\u003ePart number 073-1501 ensures precise fit and function\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive replacement parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose, part number 073-1501, is specifically designed for use in the brake systems of Chevrolet, Geo, and Toyota vehicles such as the Celica, Corolla, Matrix, and Prizm. The hose facilitates the transfer of brake fluid from the master cylinder to the brake calipers or wheel cylinders, maintaining hydraulic pressure necessary for effective braking. Beck Arnley produces this component to meet strict quality and performance standards, ensuring it integrates seamlessly with the vehicle's braking system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or cracked brake hydraulic hoses causing brake fluid leaks\u003c\/li\u003e\n\u003cli\u003eRestores proper brake fluid pressure for consistent pedal feel and braking response\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to hose swelling or bulging under pressure\u003c\/li\u003e\n\u003cli\u003ePrevents brake system failure due to hose deterioration or damage\u003c\/li\u003e\n\u003cli\u003eEliminates brake fluid contamination risks from compromised hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1501 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding damage to surrounding components. Use proper brake line wrenches to prevent rounding fittings. After installation, bleed the brake system thoroughly to remove air and verify there are no leaks. Always follow manufacturer torque specifications and safety procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1501 brake hydraulic hose to meet or exceed original equipment standards, providing reliable performance and durability. This part undergoes rigorous testing to ensure compatibility and safety. While specific warranty details may vary, Beck Arnley typically offers a limited warranty covering defects in materials and workmanship, supporting confidence in the product's quality.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388325888181,"sku":"BBGB-073-1501","price":15.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731501_Oth.jpg?v=1774710835"},{"product_id":"beck-arnley-073-1590-brake-hydraulic-hose","title":"Beck Arnley 073-1590 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Nissan Altima\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1590 brake hydraulic hose is designed specifically for Nissan Altima models, providing a dependable connection within the brake system. This hose ensures consistent brake fluid flow, maintaining safe and effective braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan Altima vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 073-1590 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed to meet OEM specifications\u003c\/li\u003e\n\u003cli\u003eDurable materials resist wear and corrosion\u003c\/li\u003e\n\u003cli\u003eEnsures secure and leak-free brake fluid transfer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1590 brake hydraulic hose is engineered to replace the original brake hose on Nissan Altima models. It is manufactured to match the exact dimensions and fittings required for proper installation and function. The hose is built with high-quality materials that withstand the pressures and temperatures typical in brake systems, helping to prevent failures caused by cracking, swelling, or leaks. This part is essential for maintaining the integrity of the hydraulic brake system and ensuring responsive braking.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or damaged brake hydraulic hoses on Nissan Altima\u003c\/li\u003e\n\u003cli\u003eAddresses brake fluid leaks that reduce braking efficiency\u003c\/li\u003e\n\u003cli\u003eEliminates hose swelling or cracking due to age or exposure\u003c\/li\u003e\n\u003cli\u003eRestores proper brake pedal feel and responsiveness\u003c\/li\u003e\n\u003cli\u003ePrevents potential brake system failure from compromised hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1590 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use appropriate tools to prevent damage to fittings and connectors. After installation, bleed the brake system thoroughly to remove air and verify there are no leaks. Follow all manufacturer torque specifications for fittings to ensure a secure connection.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1590 brake hydraulic hose to meet or exceed OEM standards, ensuring reliable performance and durability. This part undergoes rigorous quality control testing to confirm fitment and function. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, providing confidence in the product's longevity and safety.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326019253,"sku":"BBGB-073-1590","price":23.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731590_Oth.jpg?v=1774710839"},{"product_id":"beck-arnley-073-1594-brake-hydraulic-hose","title":"Beck Arnley 073-1594 Brake Hydraulic Hose - Front or Front Right","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Lexus and Toyota Models\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1594 brake hydraulic hose is designed to provide dependable brake fluid transfer for select Lexus and Toyota vehicles. Engineered to meet OEM specifications, this hose ensures consistent brake performance for your Lexus SC300, SC400, or Toyota Supra.\u003c\/p\u003e\u003ch2\u003eKey Features of Beck Arnley 073-1594 Brake Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus SC300, SC400, and Toyota Supra models\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM standards for brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eDurable construction resists wear, corrosion, and brake fluid exposure\u003c\/li\u003e\n\u003cli\u003ePrecision fitment ensures leak-free brake fluid transfer\u003c\/li\u003e\n\u003cli\u003eIncludes part number 073-1594 for easy identification and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Beck Arnley brake hydraulic hose (part number 073-1594) is engineered to maintain the integrity of your vehicle's braking system by providing a secure and flexible conduit for brake fluid. Designed specifically for Lexus SC300, SC400, and Toyota Supra models, this hose supports consistent hydraulic pressure and reliable brake response. The construction materials are selected to withstand high temperatures and resist degradation from brake fluid and environmental factors, ensuring long service life and safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose damage\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake pedal feel and hydraulic pressure\u003c\/li\u003e\n\u003cli\u003ePreventing brake failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system integrity for Lexus SC300, SC400, and Toyota Supra\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1594 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake system. Use proper tools to avoid damaging fittings and ensure all connections are tightened to manufacturer torque specifications. After installation, bleed the brake system thoroughly to remove air and verify proper brake function before driving.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1594 brake hydraulic hose to meet strict quality standards, ensuring reliable performance and durability. This part is backed by Beck Arnley's limited warranty against defects in materials and workmanship, providing confidence in your replacement brake component.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326052021,"sku":"BBGB-073-1594","price":31.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731594_Oth.jpg?v=1774710840"},{"product_id":"beck-arnley-073-1608-brake-hydraulic-hose","title":"Beck Arnley 073-1608 Brake Hydraulic Hose - Front Right","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Toyota Tacoma\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1608 brake hydraulic hose is designed specifically for Toyota Tacoma models, ensuring precise fitment and dependable brake performance. This component is essential for maintaining the integrity of your vehicle's braking system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Tacoma models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting use\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM specifications\u003c\/li\u003e\n\u003cli\u003ePart number 073-1608 for accurate identification\u003c\/li\u003e\n\u003cli\u003eDesigned to handle high brake fluid pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Construction and Precise Fitment\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1608 brake hydraulic hose is engineered to provide a secure and leak-free connection within the brake system of Toyota Tacoma vehicles. Manufactured with quality materials, this hose withstands high pressure and temperature variations commonly experienced during braking. Its precise fitment reduces installation time and ensures consistent brake fluid flow, which is critical for safe vehicle operation.\u003c\/p\u003e\u003ch2\u003eApplication and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or cracked brake hydraulic hoses on Toyota Tacoma\u003c\/li\u003e\n\u003cli\u003eEliminates brake fluid leaks that can cause reduced braking efficiency\u003c\/li\u003e\n\u003cli\u003ePrevents brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eRestores proper brake pedal feel and responsiveness\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to hose swelling or bulging under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1608 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Use proper tools to avoid damage to fittings and connectors. After installation, bleed the brake system thoroughly to remove air and verify there are no leaks. Follow all manufacturer torque specifications for fittings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 073-1608 brake hydraulic hose undergoes rigorous quality control to ensure safety and functionality. This part is backed by Beck Arnley's limited warranty, covering defects in materials and workmanship under normal use.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326084789,"sku":"BBGB-073-1608","price":25.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731608_Oth.jpg?v=1774710841"},{"product_id":"beck-arnley-073-1617-brake-hydraulic-hose","title":"Beck Arnley 073-1617 Brake Hydraulic Hose - Rear or Rear Center","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Toyota Tacoma\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1617 brake hydraulic hose is designed specifically for Toyota Tacoma models, providing a dependable connection within the brake system. This hose ensures consistent brake fluid flow, maintaining safe and effective braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Tacoma brake systems\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting use\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM specifications\u003c\/li\u003e\n\u003cli\u003ePart number 073-1617 for precise fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to handle high brake fluid pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDurable Construction and Precise Fitment\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1617 brake hydraulic hose is engineered to meet the exact requirements of Toyota Tacoma vehicles. Manufactured with quality materials, this hose resists wear, corrosion, and pressure fluctuations common in brake systems. Its design ensures a secure and leak-free connection between the brake lines and calipers, contributing to consistent brake responsiveness and safety.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Resolution\u003c\/h2\u003e\u003cp\u003eThis brake hydraulic hose is used to replace worn or damaged hoses in the Toyota Tacoma brake system. It addresses several common issues:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrake fluid leaks due to cracked or deteriorated hoses\u003c\/li\u003e\n\u003cli\u003eReduced brake pressure from hose swelling or internal damage\u003c\/li\u003e\n\u003cli\u003eBrake system failure caused by hose rupture\u003c\/li\u003e\n\u003cli\u003eCorrosion-related hose degradation\u003c\/li\u003e\n\u003cli\u003eInconsistent brake pedal feel or response\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1617 brake hydraulic hose on a Toyota Tacoma, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. After installation, bleed the brake system thoroughly to remove air and verify there are no leaks. Use appropriate tools to avoid damaging fittings and ensure proper torque specifications are met.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley brake hydraulic hoses are manufactured to meet or exceed OEM standards, ensuring reliable performance and safety. The 073-1617 part comes with a limited warranty covering defects in materials and workmanship, providing confidence in the product's durability and fitment for Toyota Tacoma vehicles.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326117557,"sku":"BBGB-073-1617","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731617_Oth.jpg?v=1774710842"},{"product_id":"beck-arnley-073-1621-brake-hydraulic-hose","title":"Beck Arnley 073-1621 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Infiniti Pathfinder and Nissan QX4\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1621 brake hydraulic hose is designed specifically for Infiniti Pathfinder and Nissan QX4 models. This component ensures consistent brake fluid transfer, maintaining safe and responsive braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Infiniti Pathfinder and Nissan QX4 vehicles\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting brake fluid containment\u003c\/li\u003e\n\u003cli\u003eOEM-quality fit and function for direct replacement\u003c\/li\u003e\n\u003cli\u003ePart number 073-1621 for precise identification\u003c\/li\u003e\n\u003cli\u003eDesigned to meet or exceed original equipment specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1621 brake hydraulic hose is engineered to provide reliable hydraulic fluid transfer within the brake system of select Infiniti and Nissan models. This hose is manufactured to meet strict quality standards, ensuring proper pressure handling and resistance to wear, heat, and corrosion. Its design supports the hydraulic braking system by maintaining fluid integrity and preventing leaks, which is critical for vehicle safety and brake responsiveness.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or cracked brake hydraulic hoses on Infiniti Pathfinder and Nissan QX4\u003c\/li\u003e\n\u003cli\u003eResolves brake fluid leaks that can cause reduced braking efficiency\u003c\/li\u003e\n\u003cli\u003eAddresses hose swelling or bulging under pressure\u003c\/li\u003e\n\u003cli\u003ePrevents brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eRestores proper brake pedal feel and hydraulic pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is securely lifted and supported before beginning installation\u003c\/li\u003e\n\u003cli\u003eCarefully remove old brake hose to avoid damage to fittings and brake lines\u003c\/li\u003e\n\u003cli\u003eUse appropriate brake fluid and bleed the brake system after installation to remove air\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Infiniti Pathfinder or Nissan QX4 model year before installation\u003c\/li\u003e\n\u003cli\u003eInspect all brake components for wear during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley brake hydraulic hoses are manufactured to meet or exceed OEM standards, providing reliable performance and durability. The 073-1621 part is backed by Beck Arnley’s quality assurance processes. Warranty coverage details should be confirmed with the product documentation or supplier, ensuring confidence in the replacement part’s longevity and function.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326150325,"sku":"BBGB-073-1621","price":23.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731621_Oth.jpg?v=1774710842"},{"product_id":"beck-arnley-073-1639-brake-hydraulic-hose","title":"Beck Arnley 073-1639 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Volkswagen Vehicles\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1639 brake hydraulic hose is designed specifically for Volkswagen models including Beetle, Golf, Golf City, Jetta, and Jetta City. This component ensures consistent brake fluid transfer, maintaining safe and responsive braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volkswagen Beetle, Golf, Golf City, Jetta, and Jetta City\u003c\/li\u003e\n\u003cli\u003ePart number 073-1639 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eConstructed to meet or exceed OEM specifications\u003c\/li\u003e\n\u003cli\u003eDurable materials resist wear, corrosion, and pressure fluctuations\u003c\/li\u003e\n\u003cli\u003eDirect replacement for original brake hydraulic hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1639 brake hydraulic hose is engineered to provide reliable fluid transfer within the brake system of select Volkswagen vehicles. This hose is manufactured with high-quality materials that withstand the high pressure and temperature conditions typical in braking systems. Its design ensures a secure fit and proper routing, which helps maintain brake system integrity and performance. The part number 073-1639 corresponds to a direct replacement hose compatible with Volkswagen Beetle, Golf, Golf City, Jetta, and Jetta City models, ensuring proper fit and function without modification.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks caused by hose damage\u003c\/li\u003e\n\u003cli\u003eAddressing soft or spongy brake pedal feel due to hose failure\u003c\/li\u003e\n\u003cli\u003ePreventing brake system pressure loss from deteriorated hoses\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system safety and responsiveness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1639 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Inspect all fittings and connections for damage or corrosion before installing the new hose. After installation, bleed the brake system thoroughly to remove air and restore proper brake pedal feel. Use appropriate tools to avoid damaging the hose or fittings during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1639 brake hydraulic hose to meet stringent quality standards, ensuring durability and reliable performance. This part is tested to comply with OEM specifications for fit, form, and function. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship, providing confidence in the product's longevity and safety.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326183093,"sku":"BBGB-073-1639","price":32.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731639_Oth.jpg?v=1774710844"},{"product_id":"beck-arnley-073-1640-brake-hydraulic-hose","title":"Beck Arnley 073-1640 Brake Hydraulic Hose - Rear Inner","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Audi and Volkswagen Models\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1640 brake hydraulic hose is designed to provide dependable brake fluid transfer for select Audi and Volkswagen vehicles. Engineered to meet OEM specifications, this hose ensures consistent braking performance for models like the Audi TT and Volkswagen Golf.\u003c\/p\u003e\u003ch2\u003eKey Features of Beck Arnley 073-1640 Brake Hose\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Audi Beetle, Golf, Jetta, R32, TT, and TT Quattro models\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM standards for brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand high brake fluid pressure and temperature\u003c\/li\u003e\n\u003cli\u003ePrecision fitment for secure and leak-free installation\u003c\/li\u003e\n\u003cli\u003ePart number 073-1640 ensures correct replacement for specified vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Beck Arnley brake hydraulic hose (part number 073-1640) is engineered specifically for use in Audi and Volkswagen vehicles including the Beetle, Golf, Jetta, R32, TT, and TT Quattro. The hose is constructed with high-quality materials designed to resist wear, corrosion, and heat exposure common in braking systems. Its precise dimensions and fittings ensure a proper seal and reliable brake fluid flow, maintaining the integrity of the hydraulic brake system. This hose is a direct replacement part that supports safe and effective braking performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks in Audi TT and Volkswagen Jetta models\u003c\/li\u003e\n\u003cli\u003eRestoring proper brake pressure and pedal feel\u003c\/li\u003e\n\u003cli\u003ePreventing brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eMaintaining brake system safety and reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle compatibility with Audi Beetle, Golf, Jetta, R32, TT, or TT Quattro before installation\u003c\/li\u003e\n\u003cli\u003eInspect brake lines and fittings for damage prior to hose replacement\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damaging hose fittings during installation\u003c\/li\u003e\n\u003cli\u003eBleed the brake system thoroughly after installation to remove air\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for hose connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley brake hydraulic hoses are manufactured to meet strict quality standards and OEM specifications. The 073-1640 part undergoes rigorous testing to ensure durability and performance under demanding conditions. While specific warranty details may vary, Beck Arnley products typically include coverage against defects in materials and workmanship to provide confidence in your purchase.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326281397,"sku":"BBGB-073-1640","price":17.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731640_Oth.jpg?v=1774710844"},{"product_id":"beck-arnley-073-1658-brake-hydraulic-hose","title":"Beck Arnley 073-1658 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Audi and Volkswagen Models\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1658 brake hydraulic hose is engineered to meet the specific braking system requirements of select Audi and Volkswagen vehicles. Designed for durability and precise fitment, this hose ensures consistent brake fluid delivery for optimal braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Audi A4, A4 Quattro, A6, A6 Quattro, RS6, S4, and S6 models\u003c\/li\u003e\n\u003cli\u003eAlso fits Volkswagen Passat models requiring brake hydraulic hose replacement\u003c\/li\u003e\n\u003cli\u003eManufactured to meet or exceed OEM specifications for reliable performance\u003c\/li\u003e\n\u003cli\u003eDurable construction resists wear, corrosion, and brake fluid exposure\u003c\/li\u003e\n\u003cli\u003ePart number 073-1658 ensures exact fit and function for specified vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Beck Arnley brake hydraulic hose (part number 073-1658) is designed specifically for use in the braking systems of Audi and Volkswagen vehicles, including the Audi A4, A4 Quattro, A6, A6 Quattro, RS6, S4, S6, and the Volkswagen Passat. The hose is constructed to provide a secure and leak-free connection between the brake lines and calipers, maintaining proper hydraulic pressure for safe braking. Its materials are selected to withstand high temperatures and exposure to brake fluid, ensuring long service life and consistent braking response.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses causing brake fluid leaks\u003c\/li\u003e\n\u003cli\u003eAddressing soft or spongy brake pedal feel due to hose expansion or damage\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid contamination from deteriorated hose materials\u003c\/li\u003e\n\u003cli\u003ePreventing brake failure caused by compromised hydraulic hose integrity\u003c\/li\u003e\n\u003cli\u003eUpgrading to a hose that meets OEM standards for improved safety and reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1658 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake system. Inspect all fittings and replace any damaged components. After installation, bleed the brake system thoroughly to remove air and verify proper brake pedal feel. Use appropriate torque specifications for fittings to prevent leaks.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1658 brake hydraulic hose to meet stringent quality standards, ensuring compatibility and durability for Audi and Volkswagen vehicles. This part is backed by Beck Arnley's commitment to quality, providing confidence in its performance and reliability. Warranty coverage details can be obtained from Beck Arnley documentation or authorized distributors.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326314165,"sku":"BBGB-073-1658","price":18.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731658_Oth.jpg?v=1774710845"},{"product_id":"beck-arnley-073-1738-brake-hydraulic-hose","title":"Beck Arnley 073-1738 Brake Hydraulic Hose - Front","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Mazda Protege and Protege5\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1738 brake hydraulic hose is designed specifically for Mazda Protege and Protege5 models. This component ensures proper brake fluid transfer, maintaining safe and responsive braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mazda Protege and Protege5 models\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting brake fluid containment\u003c\/li\u003e\n\u003cli\u003eOEM-quality fit and function for reliable brake system operation\u003c\/li\u003e\n\u003cli\u003ePart number 073-1738 for precise identification and replacement\u003c\/li\u003e\n\u003cli\u003eManufactured by Beck Arnley, a trusted name in automotive parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1738 brake hydraulic hose is engineered to meet or exceed original equipment specifications for Mazda Protege and Protege5 vehicles. This hose is constructed from high-quality materials that resist wear, corrosion, and pressure fluctuations within the brake system. Its precise fitment ensures a secure connection between brake components, preventing leaks and maintaining consistent hydraulic pressure. The part number 073-1738 corresponds to this exact replacement hose, simplifying the ordering and installation process.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or cracked brake hydraulic hoses on Mazda Protege and Protege5\u003c\/li\u003e\n\u003cli\u003eResolving brake fluid leaks that compromise braking efficiency\u003c\/li\u003e\n\u003cli\u003eAddressing brake pedal softness caused by hose deterioration\u003c\/li\u003e\n\u003cli\u003ePreventing brake system failure due to hose damage or aging\u003c\/li\u003e\n\u003cli\u003eMaintaining proper hydraulic pressure for consistent brake response\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Beck Arnley 073-1738 brake hydraulic hose, ensure the vehicle is securely lifted and supported. Carefully remove the old hose, avoiding contamination of the brake fluid system. Inspect related brake components for wear or damage during replacement. After installation, bleed the brake system thoroughly to remove air and restore proper hydraulic pressure. Use appropriate tools to avoid damaging fittings and ensure a leak-free connection.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eBeck Arnley parts are manufactured to meet strict quality standards, providing reliable performance for Mazda Protege and Protege5 brake systems. The 073-1738 brake hydraulic hose undergoes rigorous testing to ensure durability and safety. This part is backed by Beck Arnley's limited warranty against defects in materials and workmanship, offering confidence in your replacement component.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326641845,"sku":"BBGB-073-1738","price":24.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731738_Oth.jpg?v=1774710850"},{"product_id":"beck-arnley-073-1740-brake-hydraulic-hose","title":"Beck Arnley 073-1740 Brake Hydraulic Hose - Front Right","description":"\u003ch2\u003eReliable Brake Hydraulic Hose for Toyota and Scion Models\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1740 brake hydraulic hose is designed specifically for select Toyota and Scion vehicles, including the Echo, xA, and xB models. This component ensures consistent brake fluid transfer, maintaining safe and responsive braking performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Echo, Scion xA, and Scion xB models\u003c\/li\u003e\n\u003cli\u003eDurable construction to withstand high brake fluid pressure\u003c\/li\u003e\n\u003cli\u003ePrecision-engineered to meet OEM specifications\u003c\/li\u003e\n\u003cli\u003ePart number 073-1740 for accurate fitment and replacement\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials for extended service life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Beck Arnley 073-1740 brake hydraulic hose is engineered to provide a direct replacement for the original brake hose on Toyota Echo, Scion xA, and Scion xB vehicles. This hose is manufactured to meet or exceed OEM standards, ensuring proper brake fluid flow and pressure resistance. Its robust design helps prevent leaks and maintains the integrity of the brake system under various driving conditions.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or cracked brake hydraulic hoses\u003c\/li\u003e\n\u003cli\u003eAddresses brake fluid leaks that reduce braking efficiency\u003c\/li\u003e\n\u003cli\u003eEliminates spongy or unresponsive brake pedal feel\u003c\/li\u003e\n\u003cli\u003ePrevents brake system failure due to hose deterioration\u003c\/li\u003e\n\u003cli\u003eRestores proper brake fluid pressure for safe stopping\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Beck Arnley 073-1740 brake hydraulic hose should be performed by a qualified technician familiar with brake system components. Ensure the brake system is properly bled after installation to remove air and maintain optimal brake performance. Verify compatibility with your specific Toyota Echo, Scion xA, or xB model year before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eBeck Arnley manufactures the 073-1740 brake hydraulic hose to meet stringent quality standards. Each hose undergoes rigorous testing to ensure durability and performance. While specific warranty details may vary, Beck Arnley typically offers coverage against defects in materials and workmanship to provide confidence in the product's reliability.\u003c\/p\u003e","brand":"Beck Arnley","offers":[{"title":"Default Title","offer_id":43388326805685,"sku":"BBGB-073-1740","price":25.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/BA_0731740_Oth.jpg?v=1774710850"}],"url":"https:\/\/www.partcatalog.com\/collections\/hoses-and-pipes-2.oembed?page=54","provider":"PartCatalog","version":"1.0","type":"link"}