{"title":"Electrical, Lighting and Body \u003e Lighting - Exterior","description":"\u003cp\u003eExterior lighting covers every light source your vehicle shows to the world — from headlight assemblies and tail lights to fog lights, side markers, turn signals, and daytime running lights. Most assemblies don't have a fixed replacement interval; they're replaced when cracked, fogged, water-infiltrated, or after collision damage. Bulbs are the exception: halogen headlight bulbs typically last 500–1,000 hours, while HID bulbs run 2,000–3,000 hours before output degrades noticeably. When buying, confirm fitment by year, make, model, and trim — projector vs. reflector housings aren't interchangeable, and some vehicles require ADAS recalibration after headlight replacement. OEM assemblies preserve factory beam patterns and plug-and-play wiring, but quality aftermarket units from brands like TYC, Depo, and Dorman offer significant savings on non-safety-critical parts like markers and license plate lights. For HID systems, replace the ballast and igniter together if either fails — they degrade at similar rates.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eYellowed, hazy, or cracked headlight lenses\u003c\/strong\u003e — UV-oxidized polycarbonate can reduce light output by up to 80%, cutting your visible range significantly. A lens that can't be restored with a polishing kit needs a full housing replacement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWater or condensation pooling inside an assembly\u003c\/strong\u003e — minor fogging that clears with heat is normal, but standing water means the housing seal has failed and will cause bulb failure and socket corrosion if not replaced.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRapid turn signal flashing (hyperflashing)\u003c\/strong\u003e — if a turn signal blinks twice as fast as normal, one of the bulbs in that circuit has burned out or lost contact, including side marker or mirror repeater lamps on some vehicles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDim, flickering, or completely dead tail or brake lights\u003c\/strong\u003e — often a failed bulb or corroded tail light circuit board, but a cracked housing that lets in moisture will take out replacements quickly if the housing isn't addressed first.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHID headlight that won't strike or takes more than 5 seconds to reach full brightness\u003c\/strong\u003e — a slow or non-starting HID arc usually points to a failing ballast or igniter, not the bulb itself.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhysical damage from a collision or road debris\u003c\/strong\u003e — even hairline cracks in a fog light or headlight housing allow water intrusion and compromise the beam pattern, which affects both visibility and oncoming traffic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo I need to recalibrate my headlights after replacing the assembly?\u003c\/strong\u003e\n  Aim (vertical and horizontal beam angle) should always be checked after any headlight assembly swap. Vehicles with automatic headlight leveling sensors or front-facing ADAS cameras — common on 2015 and newer models — typically require a dealer or shop calibration. Basic halogen replacements on older vehicles can be aimed at home using a flat wall and a tape measure.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAre aftermarket headlight and tail light assemblies as good as OEM?\u003c\/strong\u003e\n  For tail lights, fog lights, and markers, quality aftermarket units from TYC or Depo are cost-effective and fit well. For headlights, OEM or OEM-equivalent assemblies are worth the premium — aftermarket projector housings sometimes produce uneven beam cutoffs that reduce visibility and can blind oncoming drivers. Always verify SAE\/DOT compliance markings on any replacement assembly.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat does a headlight or tail light assembly replacement cost, and is it a DIY job?\u003c\/strong\u003e\n  Aftermarket headlight assemblies typically run $60–$250 per side; tail lights $40–$180. Labor at a shop adds $50–$150 depending on complexity. Most bolt-on assemblies are straightforward DIY — remove the trim panel or access from the engine bay, unplug the harness, swap, and align. Retractable headlight motors and HID ballast replacements are more involved but still manageable with basic tools.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"cardone-49-105-headlight-motor","title":"Cardone 49-105 Headlight Motor - Left","description":"\u003ch2\u003eCardone 49-105 Headlight Motor Overview\u003c\/h2\u003e\u003cp\u003eThe Cardone 49-105 headlight motor is a remanufactured replacement built to restore headlamp movement and consistent operation. It is engineered to meet or exceed OEM performance for Saturn SC and SC1\/SC2 applications, including left-side headlight motor service.\u003c\/p\u003e\u003cp\u003eFor drivers searching for a remanufactured Saturn SC1 headlight motor or a Saturn SC2 left headlight motor replacement, this unit addresses common wear points while maintaining fit and function. The Cardone Headlight Motor line focuses on corrected original design weaknesses for longer service life.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemanufactured to meet or exceed OEM performance\u003c\/li\u003e\n\u003cli\u003eGuaranteed fit and function for the listed applications\u003c\/li\u003e\n\u003cli\u003eCritical bearings are relubricated or replaced to help extend service life\u003c\/li\u003e\n\u003cli\u003eEach motor is tested at three points during remanufacturing for performance verification\u003c\/li\u003e\n\u003cli\u003eLubricant is applied in the correct amount for quiet operation and long life\u003c\/li\u003e\n\u003cli\u003eGears are redesigned with a stronger material to help reduce premature wear, stripping, and breakage\u003c\/li\u003e\n\u003cli\u003eMotor magnets are fully recharged for reliable output\u003c\/li\u003e\n\u003cli\u003eBlade-style connector\/terminal configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eCardone remanufactured headlamp motors are built for direct replacement use on the left side of 1991-1996 Saturn SC, 1993-1996 Saturn SC1, and 1993-1996 Saturn SC2 models. The 49-105 part number is part of Cardone’s Headlight Motor line, which is focused on restoring headlamp motor operation with corrected internal components and verified performance. This part cross-references Saturn 21095841 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Help Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeadlights that do not raise or lower properly\u003c\/li\u003e\n\u003cli\u003eIntermittent or slow headlamp motor movement\u003c\/li\u003e\n\u003cli\u003eNoise from worn gears or dry internal components\u003c\/li\u003e\n\u003cli\u003ePremature motor wear from original design weaknesses\u003c\/li\u003e\n\u003cli\u003eLoss of reliable headlight actuation on the left side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm left-side fitment before ordering and match the blade connector configuration to the original unit. Review the included instruction sheet before installation, and inspect the headlamp assembly for related wear, binding, or electrical issues that could affect motor performance. This part is listed for 1991-1992 Saturn SC, left; 1993-1996 Saturn SC1, left; and 1993-1996 Saturn SC2, left.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eCardone remanufactured headlamp motors are tested during the remanufacturing process and built to meet or exceed OEM performance standards. The remanufacturing process includes bearing service, magnet recharging, and gear upgrades to support consistent operation and durability.\u003c\/p\u003e","brand":"Cardone","offers":[{"title":"Default Title","offer_id":43387771682997,"sku":"CPCX-49-105","price":110.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A1_49105_Fro.jpg?v=1774707464"},{"product_id":"cardone-49-113-headlight-motor","title":"Cardone 49-113 Headlight Motor - Right","description":"\u003ch2\u003eCardone 49-113 Headlight Motor for Corvette\u003c\/h2\u003e\u003cp\u003eRestore reliable pop-up headlight operation with the Cardone 49-113 headlight motor. This remanufactured unit is built to meet or exceed OEM performance and corrects common original design weaknesses for longer service life. It is a direct-fit solution for select Chevrolet Corvette right-side applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemanufactured headlamp motor with guaranteed fit and function\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM performance requirements\u003c\/li\u003e\n\u003cli\u003eCritical bearings are relubricated or replaced to extend service life\u003c\/li\u003e\n\u003cli\u003eMotor magnets are fully recharged for consistent output and reliability\u003c\/li\u003e\n\u003cli\u003eGears are redesigned with a stronger, less brittle material to reduce premature wear, stripping, and breakage\u003c\/li\u003e\n\u003cli\u003eEach unit is tested at three points during remanufacturing for verified performance\u003c\/li\u003e\n\u003cli\u003eAssembled with the correct amount of lubricant for quiet operation and long life\u003c\/li\u003e\n\u003cli\u003eConnector\/terminal configuration: Pin\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Cardone Headlight Motor line focuses on remanufactured exterior lighting components that address wear points found in original equipment designs. Part number 49-113 is engineered for dependable headlamp movement and consistent operation on the right side of compatible Chevrolet Corvette models. This part cross-references Chevrolet 16510064 and 16517068 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeadlight motor failure or weak movement\u003c\/li\u003e\n\u003cli\u003eIntermittent or slow pop-up headlight operation\u003c\/li\u003e\n\u003cli\u003eGrinding, stripping, or gear wear inside the motor assembly\u003c\/li\u003e\n\u003cli\u003eNoisy headlamp motor operation caused by lubrication loss\u003c\/li\u003e\n\u003cli\u003eReduced reliability from worn bearings or weakened internal components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eFits 1988-1990 Chevrolet Corvette, right. Fits 1984-1987 Chevrolet Corvette, right, with 2 wires; headlight motor. Verify connector style and vehicle configuration before installation. The package includes the headlamp motor and instruction sheet.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eCardone remanufactures this headlight motor to correct original design weaknesses and improve durability over the original part. Each unit is tested during multiple stages of the remanufacturing process to confirm performance before it is released for service.\u003c\/p\u003e","brand":"Cardone","offers":[{"title":"Default Title","offer_id":43387771781301,"sku":"CPCX-49-113","price":291.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A1_49113_Fro.jpg?v=1774707465"},{"product_id":"cardone-49-2004-headlight-motor","title":"Cardone 49-2004 Headlight Motor - Right","description":"\u003ch2\u003eRemanufactured Headlight Motor for Honda Prelude\u003c\/h2\u003e\u003cp\u003eRestore reliable pop-up headlight operation with this CARDONE remanufactured headlight motor. Built for the right side of the 1986-1987 Honda Prelude, Part Number 49-2004 is remanufactured to meet or exceed OEM performance with corrected design weaknesses for longer service life.\u003c\/p\u003e\u003cp\u003eThe CARDONE Headlight Motor line focuses on dependable fit, quiet operation, and consistent movement. For Honda Prelude headlight motor replacement needs, this unit is engineered with upgraded internal materials and tested through the remanufacturing process to help deliver stable performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemanufactured to meet or exceed OEM performance\u003c\/li\u003e\n\u003cli\u003eFits 1986-1987 Honda Prelude, right headlight motor application\u003c\/li\u003e\n\u003cli\u003eAll critical bearings are relubricated or replaced to extend product life\u003c\/li\u003e\n\u003cli\u003eEach unit is 100% tested at 3 points in the remanufacturing process\u003c\/li\u003e\n\u003cli\u003eMotor magnets are fully recharged for reliable output\u003c\/li\u003e\n\u003cli\u003eGears are redesigned with a stronger, less brittle material than original equipment\u003c\/li\u003e\n\u003cli\u003eAssembled with the precise amount of lubricant for quiet operation and long life\u003c\/li\u003e\n\u003cli\u003eGuaranteed fit and function\u003c\/li\u003e\n\u003cli\u003eConnector\/terminal configuration: blade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eCARDONE remanufactured headlamp motors are built for drivers who need a direct replacement for a worn or failing right-side unit on the Honda Prelude. Part Number 49-2004 is remanufactured with attention to common original design weaknesses, helping improve durability while maintaining OEM-style operation. This headlight motor is a practical choice for 1986-1987 Honda Prelude models that need consistent headlamp movement and dependable electrical performance.\u003c\/p\u003e\u003cp\u003eThis part cross-references Honda 33210SB0013 and 33210SBOO13 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeadlights that do not raise or lower properly\u003c\/li\u003e\n\u003cli\u003eSlow, weak, or inconsistent headlamp movement\u003c\/li\u003e\n\u003cli\u003eNoisy operation from worn internal components\u003c\/li\u003e\n\u003cli\u003eFailure caused by worn bearings, gears, or magnets\u003c\/li\u003e\n\u003cli\u003eElectrical issues related to a failing headlight motor on a Honda Prelude\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 1986-1987 Honda Prelude with the right-side headlight motor application before installation. Confirm the blade-style connector matches the original unit and inspect the surrounding headlamp linkage and electrical connections for wear or corrosion. Follow the included instruction sheet during installation and test headlight operation after the motor is installed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eEach CARDONE remanufactured headlamp motor is tested at three points during the remanufacturing process to help ensure performance. Internal components are relubricated or replaced as needed, magnets are recharged, and gears are upgraded to support long-term reliability and consistent operation.\u003c\/p\u003e","brand":"Cardone","offers":[{"title":"Default Title","offer_id":43387771879605,"sku":"CPCX-49-2004","price":162.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A1_492004_Fro.jpg?v=1774707465"},{"product_id":"cardone-82-9102h-headlight-motor","title":"Cardone 82-9102H Headlight Motor - Left or Right","description":"\u003ch2\u003eHeadlight Motor for Pontiac Firebird and Fiero\u003c\/h2\u003e\u003cp\u003eRestore reliable headlamp movement with this Cardone Select headlight motor. Built as a new replacement for failed original units, it is engineered to meet or exceed OEM performance while addressing common design weaknesses found in the original part.\u003c\/p\u003e\u003cp\u003eCompatible with 1987-1992 Pontiac Firebird, left, and 1987-1988 Pontiac Fiero, right. Part number 82-9102H is a direct-fit electrical lighting and body replacement for vehicles with a bullet-style connector\/terminal configuration.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e100% load tested for verified performance before shipment\u003c\/li\u003e\n\u003cli\u003eAssembled with the correct amount of lubricant for quiet operation and extended service life\u003c\/li\u003e\n\u003cli\u003eGuaranteed fit and function for the listed applications\u003c\/li\u003e\n\u003cli\u003eUpgraded gears use a stronger, less brittle material than original equipment\u003c\/li\u003e\n\u003cli\u003eDesigned to reduce premature wear, stripping, and breakage\u003c\/li\u003e\n\u003cli\u003eNew part condition with headlamp motor and instruction sheet included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eCardone’s Headlight Motor line focuses on replacing failed pop-up headlamp motors with a new unit that delivers consistent operation. For Pontiac Firebird and Pontiac Fiero owners, part number 82-9102H provides a practical replacement when the original motor no longer raises or lowers the headlamp assembly correctly. The design emphasizes corrected weak points from the factory unit, helping support longer-lasting performance in daily use.\u003c\/p\u003e\u003cp\u003eThis part cross-references Pontiac 16507926 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Help Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeadlights that do not raise or lower properly\u003c\/li\u003e\n\u003cli\u003eIntermittent or slow headlamp motor operation\u003c\/li\u003e\n\u003cli\u003eGrinding, stripping, or gear noise from the motor assembly\u003c\/li\u003e\n\u003cli\u003ePremature wear in the original headlight drive components\u003c\/li\u003e\n\u003cli\u003eFailed pop-up headlamp movement on Pontiac Firebird and Pontiac Fiero models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the connector\/terminal style before installation; this unit uses a bullet configuration. Confirm side-specific fitment before ordering, since the listed applications differ by position. Follow the included instruction sheet and inspect the headlamp linkage and related electrical connections for wear or corrosion during replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eEach motor is 100% load tested to confirm operation and assembled to Cardone’s performance standards for fit and function. The brand’s Select headlight motor line is built to deliver OEM-level operation with corrected internal weaknesses for improved durability.\u003c\/p\u003e","brand":"Cardone","offers":[{"title":"Default Title","offer_id":43388212412597,"sku":"CNRD-82-9102H","price":125.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A1_829102H_Fro.jpg?v=1774709671"},{"product_id":"cardone-82-9113h-headlight-motor","title":"Cardone 82-9113H Headlight Motor - Right","description":"\u003ch2\u003eCardone Headlight Motor for Corvette\u003c\/h2\u003e\u003cp\u003eRestore headlamp movement with the Cardone 82-9113H headlight motor, built for dependable operation on select Chevrolet Corvette applications. This new replacement is engineered to meet or exceed OEM performance while addressing common design weaknesses found in the original unit.\u003c\/p\u003e\u003cp\u003eCompatible with 1984-1990 Chevrolet Corvette right-side headlight motor applications, including 1984-1987 Corvette models with 2 wires and 1988-1990 Corvette models. The Cardone 82-9113H is a direct-fit solution for drivers needing consistent headlamp actuation and quiet operation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e100% load tested for verified performance before shipment\u003c\/li\u003e\n\u003cli\u003eAssembled with the correct lubricant amount for quiet operation and extended service life\u003c\/li\u003e\n\u003cli\u003eImproved gear material helps resist wear, stripping, and breakage\u003c\/li\u003e\n\u003cli\u003eBuilt to meet or exceed OEM performance standards\u003c\/li\u003e\n\u003cli\u003eGuaranteed fit and function for the listed Chevrolet Corvette applications\u003c\/li\u003e\n\u003cli\u003eBlade-style connector\/terminal configuration\u003c\/li\u003e\n\u003cli\u003eNew product condition\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eCardone Select headlight motors are designed as OE-style replacements for vehicles with failed or weak headlamp motors. For the Chevrolet Corvette, the 82-9113H focuses on correcting original design weaknesses so the replacement can deliver longer-lasting operation and more consistent headlight movement. This part number, 82-9113H, is intended for the right side and is a practical choice when the original motor no longer raises or lowers the headlamp assembly correctly.\u003c\/p\u003e\u003cp\u003eThis part cross-references Chevrolet 16510052 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeadlights that do not raise or lower properly\u003c\/li\u003e\n\u003cli\u003eIntermittent or slow headlamp motor operation\u003c\/li\u003e\n\u003cli\u003eGrinding or noisy headlight movement\u003c\/li\u003e\n\u003cli\u003ePremature gear wear or stripped internal components\u003c\/li\u003e\n\u003cli\u003eFailure of the right-side headlamp motor on a Chevrolet Corvette\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the connector style and vehicle configuration before installation. This headlight motor is listed for right-side Chevrolet Corvette applications, including 1984-1987 models with 2 wires and 1988-1990 models. Follow the included instruction sheet and confirm proper headlamp operation after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eCardone uses load testing to confirm performance and applies engineering updates to improve durability over the original design. The 82-9113H is a new replacement part built to deliver reliable fitment and function for the specified Corvette applications.\u003c\/p\u003e","brand":"Cardone","offers":[{"title":"Default Title","offer_id":43388212871349,"sku":"CNRD-82-9113H","price":323.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A1_829113H_Fro.jpg?v=1774709671"},{"product_id":"cardone-82-9124h-headlight-motor","title":"Cardone 82-9124H Headlight Motor - Right","description":"\u003ch2\u003eCardone Headlight Motor 82-9124H\u003c\/h2\u003e\u003cp\u003eRestore proper headlamp movement with the Cardone 82-9124H Headlight Motor. This new replacement is built for the right-side headlight motor application on select Pontiac Firebird models and is engineered to meet or exceed OEM performance.\u003c\/p\u003e\u003cp\u003eCardone Select headlight motors address common original-design weaknesses with updated materials and controlled assembly for dependable operation. For Pontiac Firebird owners needing a right headlight motor, the 82-9124H is built for accurate fit, quiet movement, and consistent function.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e100% load tested for verified performance\u003c\/li\u003e\n\u003cli\u003eAssembled with the correct amount of lubricant for quiet operation and longer service life\u003c\/li\u003e\n\u003cli\u003eGuaranteed fit and function\u003c\/li\u003e\n\u003cli\u003eImproved gear material helps resist wear, stripping, and breakage\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM performance targets\u003c\/li\u003e\n\u003cli\u003eBlade connector\/terminal configuration\u003c\/li\u003e\n\u003cli\u003eNew product condition\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Cardone Headlight Motor 82-9124H is a new electrical replacement for the exterior lighting system. It is designed for the right side on 1998-2002 Pontiac Firebird models and is intended to restore headlamp motor operation when the original unit fails. This part cross-references Pontiac 16524230 for the same application.\u003c\/p\u003e\u003cp\u003eFits 1998-2002 Pontiac Firebird, right.\u003c\/p\u003e\u003ch2\u003eCommon Problems It Can Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeadlamp motor failure or inoperative pop-up headlight movement\u003c\/li\u003e\n\u003cli\u003eSlow, noisy, or inconsistent headlight operation\u003c\/li\u003e\n\u003cli\u003eGear wear that causes slipping or incomplete travel\u003c\/li\u003e\n\u003cli\u003eElectrical connection issues at the motor terminal\u003c\/li\u003e\n\u003cli\u003ePremature wear from brittle original components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle is a 1998-2002 Pontiac Firebird with the right-side headlight motor application before installation. Match the blade connector style and verify the mounting and linkage points against the original unit. Follow the included instruction sheet and test headlamp operation after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eCardone Select headlight motors are engineered to correct known OE design weaknesses and are load tested before release to help ensure consistent performance. The updated gear design and controlled lubrication support quiet operation and long service life.\u003c\/p\u003e","brand":"Cardone","offers":[{"title":"Default Title","offer_id":43388213362869,"sku":"CNRD-82-9124H","price":145.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/A1_829124H_Fro.jpg?v=1774709673"},{"product_id":"phillips-de3022llb2-fog-light-bulb","title":"Phillips DE3022LLB2 Fog Light Bulb - Rear","description":"\u003ch2\u003ePhillips DE3022LLB2 Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips LongerLife DE3022LLB2 is a 12-volt fog light bulb built for drivers who want dependable value and straightforward exterior lighting service. With a clear bulb color, 5-watt output, and S8,5s base, it is a direct-fit style replacement for a wide range of vehicles that use this bulb specification.\u003c\/p\u003e\u003cp\u003ePhillips LongerLife - Twin Blister Pack is the product line for drivers looking for longer service life in a practical replacement bulb. This line focuses on value-oriented lighting maintenance for vehicles that need a precise bulb match, including applications across Acura, Toyota, Nissan, Mazda, Subaru, and Lexus models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e12-volt fog light bulb for exterior lighting applications\u003c\/li\u003e\n\u003cli\u003eClear bulb color for consistent light output\u003c\/li\u003e\n\u003cli\u003e5-watt design with a single filament\u003c\/li\u003e\n\u003cli\u003ePush-type construction with 2 contacts\u003c\/li\u003e\n\u003cli\u003eS8,5s bulb base for specified fitment\u003c\/li\u003e\n\u003cli\u003ePhillips LongerLife line for value-focused replacement needs\u003c\/li\u003e\n\u003cli\u003ePart number DE3022LLB2 for catalog matching and service lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Application\u003c\/h2\u003e\u003cp\u003eFits a broad range of vehicles across model years 1973-2020, including long-tail search applications such as Fits 2014-2020 Acura MDX, N\/A; Fits 2015-2020 Nissan Murano, N\/A; Fits 1998-2020 Toyota Sienna, N\/A; and Fits 2010-2018 Mazda 3, N\/A. This part also fits many other listed applications, including Toyota Highlander, Subaru Crosstrek, Lexus RX350, and Honda Odyssey, depending on the exact bulb position and vehicle configuration shown in the fitment data.\u003c\/p\u003e\u003cp\u003eThis part cross-references 73870 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Bulb Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or failed fog light output\u003c\/li\u003e\n\u003cli\u003eExterior bulb replacement during routine maintenance\u003c\/li\u003e\n\u003cli\u003eRestoring proper forward visibility in fog light housings\u003c\/li\u003e\n\u003cli\u003eReplacing a worn bulb with the correct 12V, 5W specification\u003c\/li\u003e\n\u003cli\u003eService needs on vehicles such as Acura MDX, Toyota Sienna, and Nissan Rogue\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the bulb base, voltage, wattage, and contact layout before installation. Match the vehicle’s original bulb type and follow the fitment notes exactly, especially where the listing specifies front door, rear, or fog light bulb alignment requirements. For vehicles such as the Acura MDX, Nissan Murano, and Toyota Tacoma, confirm the application against the original bulb number and housing style before replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips positions the LongerLife line as a value-focused replacement option for drivers who want dependable service from a correctly specified bulb. Use the part number DE3022LLB2 to confirm catalog accuracy and application matching.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571913523381,"sku":"BCGL-DE3022LLB2","price":12.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_DE3022LLB2_Fro_16c79c63-901b-407d-8412-7360cf72ebe2.jpg?v=1774971660"},{"product_id":"phillips-d1rc1-headlight-bulb","title":"Phillips D1RC1 Headlight Bulb - High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhillips D1RC1 Xenon HID Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips D1RC1 is a Xenon HID headlight bulb built for drivers who need stronger forward lighting with lower power draw than a standard halogen setup. It delivers a brighter beam for earlier obstacle detection and improved reaction time at highway speeds.\u003c\/p\u003e\u003ch2\u003eStandard - Single Commercial Pack\u003c\/h2\u003e\u003cp\u003eThis Phillips Standard - Single Commercial Pack product line is focused on straightforward replacement lighting for vehicles equipped with HID systems. It is a direct-fit style headlight bulb for low beam applications where DOT-approved, street-legal lighting is required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eXenon HID headlight bulb for high beam and low beam applications where specified\u003c\/li\u003e\n\u003cli\u003eUses 35 watts at 85 volts with a 0.41 amp rating\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eHalogen: No\u003c\/li\u003e\n\u003cli\u003eLength: 3.25 in.\u003c\/li\u003e\n\u003cli\u003eMercury-containing product; handle and dispose of according to local regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePhillips D1RC1 is engineered as an HID replacement bulb for vehicles that use D1R-style xenon lighting. Compared with halogen lighting, this bulb produces more usable light while drawing less electrical power, helping preserve system capacity for other vehicle functions. It is a practical choice for restoring low beam output on applications such as the 2003-2011 Lincoln Town Car, 2003-2006 Lincoln Navigator, and 2003-2006 Cadillac Escalade family models with HID headlights.\u003c\/p\u003e\u003cp\u003eThis part cross-references Autotecnica D1R for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Bulb Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDiminished low beam output from an aging HID bulb\u003c\/li\u003e\n\u003cli\u003eReduced visibility on dark roads and highways\u003c\/li\u003e\n\u003cli\u003eDelayed recognition of obstacles, lane markings, and road hazards\u003c\/li\u003e\n\u003cli\u003eElectrical load concerns in HID-equipped lighting systems\u003c\/li\u003e\n\u003cli\u003eNeed for a street-legal replacement bulb for supported Cadillac Escalade, Lincoln Navigator, and Mercury Montego applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConfirm the vehicle uses HID headlights before ordering.\u003c\/li\u003e\n\u003cli\u003eVerify the bulb type and position match the application; this part is listed for low beam use on the supported vehicles.\u003c\/li\u003e\n\u003cli\u003eHandle HID bulbs carefully and avoid touching the glass surface.\u003c\/li\u003e\n\u003cli\u003eFollow vehicle service procedures for ballast and lighting system access.\u003c\/li\u003e\n\u003cli\u003eDispose of the old bulb according to mercury-handling regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eThis Phillips D1RC1 bulb is DOT approved and street legal for the listed applications. Phillips lighting products are built for OE-style replacement use in vehicles equipped with factory HID systems.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571921223861,"sku":"BCGL-D1RC1","price":62.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_D1RC1_Fro.jpg?v=1774971662"},{"product_id":"phillips-d1sc1-headlight-bulb","title":"Phillips D1SC1 Headlight Bulb - High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhilips Xenon HID Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips D1SC1 is a Xenon HID headlight bulb for vehicles equipped with HID lighting systems. It delivers brighter output than halogen while using less power, helping improve forward visibility for night driving and highway travel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePhilips Xenon HID technology for high beam and low beam applications\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003e35W, 85V electrical rating\u003c\/li\u003e\n\u003cli\u003eDirect replacement for HID headlight systems only; not for halogen housings\u003c\/li\u003e\n\u003cli\u003ePart number D1SC1 for accurate ordering and fitment lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eStandard - Single Commercial Pack Line\u003c\/h2\u003e\u003cp\u003eThis Phillips Standard - Single Commercial Pack listing is built for buyers who need a straightforward HID replacement without extra product-line complexity. Use D1SC1 when you need a Philips Xenon HID bulb that matches the vehicle’s original HID headlamp setup and supports both high beam and low beam applications where specified.\u003c\/p\u003e\u003cp\u003eCompatible With select Mercedes-Benz SLC300, BMW X6, Genesis G90, Mini Cooper, Aston Martin Rapide, and other HID-equipped vehicles across model years 1999-2020. This part cross-references URO D1S for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aging HID headlight output\u003c\/li\u003e\n\u003cli\u003eReduced nighttime visibility on highways and dark roads\u003c\/li\u003e\n\u003cli\u003eUneven light performance from a worn xenon bulb\u003c\/li\u003e\n\u003cli\u003eHeadlight replacement needs after HID bulb failure\u003c\/li\u003e\n\u003cli\u003eRestoring factory-style lighting performance in HID-equipped vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the original bulb type before ordering, since this bulb is for HID headlight systems and not halogen lamps. Confirm the vehicle’s headlight configuration, socket style, and beam position against the fitment list for your exact year, make, and model. Handle HID bulbs carefully during installation and avoid touching the glass surface.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDOT approved and street legal for listed applications. Philips Xenon HID lighting is engineered to provide strong illumination while drawing less power than halogen, supporting reliable replacement use in approved HID headlamp systems.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571929645237,"sku":"BCGL-D1SC1","price":62.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_D1SC1_Fro.jpg?v=1774971662"},{"product_id":"phillips-d2rc1-headlight-bulb","title":"Phillips D2RC1 Headlight Bulb - High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhilips Xenon HID Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Philips Standard - Single Commercial Pack Xenon HID headlight bulb is built for drivers who need stronger forward lighting without adding unnecessary electrical load. With HID output that delivers more light than a halogen bulb, this bulb improves visibility for nighttime driving, highway travel, and low-light conditions.\u003c\/p\u003e\u003cp\u003eCompatible With a wide range of vehicles including Subaru Crosstrek, Nissan Altima, and Mercedes-Benz E-Class applications that use HID headlamps, part number D2RC1 is a direct lighting solution for low beam and select high beam applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePhilips Xenon HID lighting for brighter road illumination than halogen\u003c\/li\u003e\n\u003cli\u003eLower power draw than comparable halogen bulbs\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eBeam type supports high beam, low beam, and high beam\/low beam applications depending on vehicle\u003c\/li\u003e\n\u003cli\u003e35-watt design with 42V\/85V electrical specifications\u003c\/li\u003e\n\u003cli\u003eLength: 3.25 in.\u003c\/li\u003e\n\u003cli\u003ePart number D2RC1 for accurate replacement matching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhilips Standard - Single Commercial Pack lighting is focused on OE-style replacement performance for vehicles equipped with HID headlights. This D2RC1 xenon bulb is intended for drivers who want clearer visibility and faster recognition of road hazards, especially at highway speeds where additional light can provide more reaction time. It is not a halogen bulb and is listed as DOT approved and street legal for the applications shown.\u003c\/p\u003e\u003cp\u003eThis part cross-references Autotecnica D2R and Dorman - HELP 80851 for the same application. Search terms such as 2012-2015 Nissan Altima low beam HID bulb, 2006-2013 Subaru Forester low beam headlight bulb, and 1996-2002 Mercedes-Benz E320 HID replacement bulb align with the confirmed fitment data for this part.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Bulb Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDull or weakened HID headlight output\u003c\/li\u003e\n\u003cli\u003ePoor nighttime visibility on dark roads\u003c\/li\u003e\n\u003cli\u003eReduced ability to spot obstacles early\u003c\/li\u003e\n\u003cli\u003eFailed low beam or high beam HID bulb on supported vehicles\u003c\/li\u003e\n\u003cli\u003eUneven lighting performance from aging xenon bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the original bulb type and headlamp configuration before installation, especially on vehicles listed for HID headlights only. Confirm the beam position shown in the fitment data, since this bulb is used in low beam, high beam, and high beam\/low beam applications depending on the vehicle. Handle the bulb carefully during installation and avoid touching the glass surface.\u003c\/p\u003e\u003cp\u003eConfirmed fitment includes 2016-2018 Subaru Crosstrek, low beam; 2012-2015 Nissan Altima, low beam and high beam; 2006-2013 Subaru Forester, low beam; 2004-2006 Volvo S60, low beam; and 1996-2002 Mercedes-Benz E320, low beam.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips xenon HID lighting is engineered for consistent output and OE-style replacement use in supported applications. This bulb is DOT approved, street legal, and built to meet the electrical and lighting requirements listed for the vehicle fitments above.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571931414709,"sku":"BCGL-D2RC1","price":46.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_D2RC1_Fro_6eb1342f-4fd1-4dcd-973d-51b2d86a14c1.jpg?v=1774971662"},{"product_id":"phillips-d2sc1-headlight-bulb","title":"Phillips D2SC1 Headlight Bulb - High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhillips Xenon HID Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips D2SC1 is a Xenon HID headlight bulb built for drivers who want stronger road visibility with lower power draw than a standard halogen setup. It is DOT approved and street legal, making it a practical replacement for HID-equipped vehicles that need reliable nighttime lighting.\u003c\/p\u003e\u003cp\u003eWith a 35W design and 85V operation, this bulb is engineered to deliver a brighter HID beam pattern while preserving electrical capacity for other vehicle functions. The D2SC1 is a direct-fit style option for many low beam and high beam HID applications across Acura, BMW, Infiniti, Mazda, Mercedes-Benz, Nissan, and other makes.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eXenon HID headlight bulb for HID-equipped vehicles\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003e35W power rating with 85V operation\u003c\/li\u003e\n\u003cli\u003eHigh beam and low beam applications, depending on vehicle fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to provide stronger forward lighting than halogen bulbs\u003c\/li\u003e\n\u003cli\u003ePhillips D2SC1 part number for accurate replacement matching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Standard - Single Commercial Pack line is Phillips’ straightforward replacement offering for drivers and repair shops that need a dependable HID bulb without extra packaging complexity. This D2SC1 bulb is used in a wide range of factory HID headlamp systems, including applications on the Nissan 370Z, Infiniti G37, and Acura TL. It also appears in fitments for BMW 330i, Mazda 3, and Mercedes-Benz E-Class and SLK models with HID headlamps.\u003c\/p\u003e\u003cp\u003eCross-reference: This part cross-references PEAK D2S for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimming or failed HID headlight output\u003c\/li\u003e\n\u003cli\u003eReduced nighttime visibility on highway and city roads\u003c\/li\u003e\n\u003cli\u003eUneven light output between left and right headlamps\u003c\/li\u003e\n\u003cli\u003eNeed for a street-legal HID replacement bulb\u003c\/li\u003e\n\u003cli\u003eLoss of lighting performance in HID-equipped vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the original bulb type before ordering, especially on vehicles with HID headlamps and multiple bulb options. This bulb is listed for specific low beam and high beam applications only, so match the year, make, model, and position exactly to the fitment data. Handle HID bulbs carefully during installation and avoid touching the glass surface.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips manufactures this bulb to DOT-approved standards for street use. The D2SC1 is specified as a mercury-containing product, so follow local disposal requirements when replacing the bulb.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571932594357,"sku":"BCGL-D2SC1","price":44.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_D2SC1_Fro_0b24526b-4fbf-47f9-8614-3031c24f98dc.jpg?v=1774971663"},{"product_id":"phillips-d3rc1-headlight-bulb","title":"Phillips D3RC1 Headlight Bulb - High Beam and Low Beam","description":"\u003ch2\u003ePhilips Xenon HID Headlight Bulb for Mustang\u003c\/h2\u003e\u003cp\u003ePhilips D3RC1 is a Xenon HID headlight bulb for 2008-2009 Ford Mustang models with HID headlights. It delivers higher light output than a halogen bulb while using less electrical power, helping preserve vehicle electrical capacity for other systems. For Ford Mustang drivers, that means clearer forward lighting and earlier visibility of road hazards at highway speeds.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePhilips Xenon HID headlight bulb for exterior lighting applications\u003c\/li\u003e\n\u003cli\u003eFits 2008-2009 Ford Mustang, high beam and low beam\u003c\/li\u003e\n\u003cli\u003eUses less power than halogen while producing more light output\u003c\/li\u003e\n\u003cli\u003eSupports earlier detection of obstacles and road hazards\u003c\/li\u003e\n\u003cli\u003eStandard - Single Commercial Pack product line\u003c\/li\u003e\n\u003cli\u003ePart number D3RC1 for accurate ordering and fitment lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Philips Standard - Single Commercial Pack line focuses on straightforward replacement lighting for vehicles equipped with HID systems. This D3RC1 bulb is specified for 2008-2009 Ford Mustang applications with HID headlights and is listed for both high beam and low beam positions. If you are searching for a Ford Mustang HID headlight bulb, a 2008 Ford Mustang high beam and low beam replacement, or a 2009 Ford Mustang HID bulb, this part matches the confirmed application data. This part cross-references Gates (e.g., 31298) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimming HID headlight output\u003c\/li\u003e\n\u003cli\u003eReduced nighttime visibility on the road\u003c\/li\u003e\n\u003cli\u003eDelayed reaction time to hazards at highway speeds\u003c\/li\u003e\n\u003cli\u003eNeed for a direct replacement bulb for HID-equipped Mustang headlights\u003c\/li\u003e\n\u003cli\u003eUneven or aging forward lighting performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify that the vehicle is a 2008-2009 Ford Mustang with HID headlights before ordering. Confirm the bulb position and part number D3RC1 against the existing lamp and vehicle service information. Handle HID bulbs carefully during installation and avoid touching the glass surface.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips Xenon HID lighting is engineered to provide higher light output with lower power draw than halogen lighting, supporting dependable performance in HID-equipped vehicles. Part number D3RC1 is listed for the confirmed Mustang application shown above.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571933216949,"sku":"BCGL-D3RC1","price":83.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_D3RC1_Fro.jpg?v=1774971663"},{"product_id":"phillips-d4rc1-headlight-bulb","title":"Phillips D4RC1 Headlight Bulb - High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhillips Xenon HID Headlight Bulb for OE Fitment\u003c\/h2\u003e\u003cp\u003eThe Phillips Standard - Single Commercial Pack Xenon HID headlight bulb delivers brighter forward lighting than halogen while using less power. Part number D4RC1 is built for drivers who need clear road visibility and direct OE-style replacement fitment for select Subaru Forester, Toyota Avalon, and Toyota Prius applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eXenon HID headlight bulb for exterior lighting applications\u003c\/li\u003e\n\u003cli\u003e35-watt output with 42-volt operation and 0.83 amp rating\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eBeam type supports high beam and low beam applications where specified\u003c\/li\u003e\n\u003cli\u003eHalogen: No\u003c\/li\u003e\n\u003cli\u003eLength: 3.25 inches\u003c\/li\u003e\n\u003cli\u003ePhillips part number D4RC1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhillips D4RC1 is a xenon HID headlight bulb engineered for vehicles equipped with HID headlight systems. Compared with halogen lighting, HID technology produces more light while drawing less electrical power, helping preserve vehicle electrical capacity for other systems. That added light output can improve distance visibility and give drivers more time to identify road hazards at highway speeds. This part line, Phillips Standard - Single Commercial Pack, focuses on straightforward replacement lighting for vehicles that require the correct HID bulb specification.\u003c\/p\u003e\u003cp\u003eCompatible With 2014-2016 Subaru Forester, low beam; 2008-2010 Toyota Avalon, low beam; and 2006-2009 Toyota Prius, high beam and low beam. This part cross-references Four Seasons 13712 for the same application. Phillips D4RC1 is a direct search term for buyers looking for a HID replacement bulb for Subaru Forester, Toyota Avalon, or Toyota Prius models with factory HID headlights.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Bulb Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or weakened HID headlight output\u003c\/li\u003e\n\u003cli\u003eUneven forward lighting from an aging bulb\u003c\/li\u003e\n\u003cli\u003eReduced nighttime visibility on highways and dark roads\u003c\/li\u003e\n\u003cli\u003eNeed for a direct replacement in factory HID headlight systems\u003c\/li\u003e\n\u003cli\u003eFailed bulb causing one headlight to stop illuminating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eUse this bulb only in vehicles equipped with HID headlights and verify the required beam position before ordering. Confirm the vehicle’s original bulb specification against the existing lamp and housing requirements for the 2014-2016 Subaru Forester low beam, 2008-2010 Toyota Avalon low beam, or 2006-2009 Toyota Prius high beam and low beam applications. Handle HID bulbs carefully during installation and avoid touching the glass surface.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eThis Phillips HID bulb is DOT approved and street legal for the listed applications. It is built to meet the lighting requirements of vehicles using factory HID systems and follows the specifications shown for voltage, wattage, and beam type.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571939606709,"sku":"BCGL-D4RC1","price":66.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_D4RC1_Fro.jpg?v=1774971664"},{"product_id":"phillips-d4sc1-headlight-bulb","title":"Phillips D4SC1 Headlight Bulb - High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhilips Xenon HID Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Philips D4SC1 is a Xenon HID headlight bulb built for drivers who want stronger forward lighting with lower power draw than a comparable halogen setup. It delivers a brighter beam pattern for earlier hazard detection, making it a practical choice for night driving on vehicles equipped with HID headlights.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eXenon HID design with 35W output and 42V operating voltage\u003c\/li\u003e\n\u003cli\u003eProduces about twice the light of halogen bulbs while using less power\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal for road use\u003c\/li\u003e\n\u003cli\u003eBeam type supports both high beam and low beam applications where specified\u003c\/li\u003e\n\u003cli\u003eStandard - Single Commercial Pack product line for straightforward replacement selection\u003c\/li\u003e\n\u003cli\u003ePart number D4SC1 for accurate catalog matching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack focuses on direct replacement lighting for drivers who need a dependable bulb match without sorting through multiple trim or package variations. The D4SC1 is a Philips Xenon HID bulb engineered to maintain efficient electrical use while improving visibility. In fitments such as Toyota Sienna, Lexus ES350, Lexus RX350, Mazda CX-5, and Subaru Outback, this bulb is used in HID headlight systems where the factory application calls for D4SC1 service.\u003c\/p\u003e\u003cp\u003eThis part cross-references Dorman - HELP 13652 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aging HID headlight output\u003c\/li\u003e\n\u003cli\u003eReduced visibility on dark roads and highways\u003c\/li\u003e\n\u003cli\u003eDelayed reaction time to road hazards at speed\u003c\/li\u003e\n\u003cli\u003eNeed for a DOT approved, street legal HID replacement\u003c\/li\u003e\n\u003cli\u003eReplacement needs for HID-equipped Toyota Sienna, Lexus ES350, and Mazda CX-5 lighting systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify the vehicle uses HID headlights before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm the required beam position for your application: low beam, high beam, or high beam and low beam where listed.\u003c\/li\u003e\n\u003cli\u003eHandle the bulb carefully during installation to avoid contamination or damage.\u003c\/li\u003e\n\u003cli\u003eMatch the part number D4SC1 to the original bulb specification for proper fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips manufactures this HID bulb to DOT-approved, street-legal standards for listed applications. The D4SC1 is specified for vehicles across 2005-2020 model years, including Toyota Sienna, Lexus IS250, Lexus RX450h, and Mitsubishi Mirage HID-equipped applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571940425909,"sku":"BCGL-D4SC1","price":66.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_D4SC1_Fro.jpg?v=1774971664"},{"product_id":"phillips-hpc24wnac1-turn-signal-light-bulb","title":"Phillips HPC24WNAC1 Turn Signal Light Bulb - Front, Front Inner or Rear","description":"\u003ch2\u003eOE-Style Turn Signal Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips HPC24WNAC1 is a standard turn signal light bulb built for exterior lighting applications that call for OE-level fit and function. It uses an amber bulb color, a single filament, and a twist-type PU20d\/6 base for direct replacement in supported front and rear signal positions.\u003c\/p\u003e\u003cp\u003ePhillips Standard range is positioned as an original-equipment-quality lighting solution, offering a practical replacement choice for drivers servicing Cadillac CTS, Audi A4, Audi Q5, Buick Enclave, GMC Acadia, Lincoln MKZ, Saturn Outlook, and Saab 9-5 applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number HPC24WNAC1 for accurate ordering and service matching\u003c\/li\u003e\n\u003cli\u003eAmber bulb color for turn signal use\u003c\/li\u003e\n\u003cli\u003eSingle-filament design for signal operation\u003c\/li\u003e\n\u003cli\u003eTwist-type base with PU20d\/6 bulb base type\u003c\/li\u003e\n\u003cli\u003e2-contact electrical interface\u003c\/li\u003e\n\u003cli\u003e24-watt rating at 13.5 volts\u003c\/li\u003e\n\u003cli\u003ePhillips Standard - Single Commercial Pack product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis Phillips turn signal bulb is engineered for vehicles that require a PU20d\/6 twist-base exterior lamp with amber output. The Standard line is built around the same OE-quality approach Phillips supplies to automakers, making it a straightforward choice for restoring proper signal visibility and maintaining factory-style lighting performance. The HPC24WNAC1 is listed for front and rear applications across multiple platforms, including 2014-2015 Cadillac CTS front, 2009-2012 Audi A4 front, and 2008-2012 Buick Enclave front.\u003c\/p\u003e\u003cp\u003eFor fitment-based searches, this bulb matches long-tail needs such as a front turn signal bulb for 2014-2015 Cadillac CTS, a front signal bulb for 2009-2012 Audi A4 Quattro, or a rear turn signal bulb for 2010-2012 Lincoln MKZ. The HPC24WNAC1 also appears in front inner Saab 9-5 applications and front lighting positions on GMC Acadia and Saturn Outlook models.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Bulb Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBurned-out front or rear turn signal bulb\u003c\/li\u003e\n\u003cli\u003eDim or inconsistent amber signal output\u003c\/li\u003e\n\u003cli\u003eFailed exterior indicator lamp during inspection\u003c\/li\u003e\n\u003cli\u003eRestoration of factory-style signal visibility\u003c\/li\u003e\n\u003cli\u003eReplacement for a twist-base bulb with the correct electrical and base configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the bulb base type, contact count, wattage, and vehicle position before installation. This part uses a twist-type PU20d\/6 base, so the socket must match the original design. Confirm the application by year, make, model, and position, especially on vehicles with lighting-package variations such as HID headlights or halogen capsule headlights noted in the fitment data.\u003c\/p\u003e\u003cp\u003eFor service matching, this part cross-references common OE-style lighting applications where the same bulb specification is required. The part number HPC24WNAC1 should be checked against the original bulb marking before replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard lighting products are built to OE-quality expectations and are used as direct replacement lighting components for automotive exterior applications. The brand’s standard line is focused on dependable fit and consistent output for routine service work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Phillips\u003c\/li\u003e\n\u003cli\u003eBrand line: Standard - Single Commercial Pack\u003c\/li\u003e\n\u003cli\u003ePart number: HPC24WNAC1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571951730869,"sku":"BCGL-HPC24WNAC1","price":19.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_HPC24WNAC1_Fro.jpg?v=1774971666"},{"product_id":"phillips-h1b1-fog-light-bulb","title":"Phillips H1B1 Fog Light Bulb - Front, High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhillips H1B1 Halogen Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H1B1 is a standard halogen fog light bulb built to OE-quality standards for clear, dependable exterior lighting. It uses a 12V, 55W glass capsule with a clear finish and DOT approval for road use.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Blister Pack is the brand line for drivers who want original-equipment quality in a straightforward replacement bulb. This line is positioned as a value-focused option for everyday lighting repairs and maintenance, including fog lamp and halogen capsule applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen fog light bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003e12V, 55W output with a single filament design\u003c\/li\u003e\n\u003cli\u003eDOT approved for regulated road use\u003c\/li\u003e\n\u003cli\u003eP14,5s base type for specified vehicle applications\u003c\/li\u003e\n\u003cli\u003eOE-quality replacement from Phillips Standard\u003c\/li\u003e\n\u003cli\u003ePart number H1B1 for easy catalog lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Phillips H1B1 fog light bulb is designed for drivers replacing a worn or dim exterior lamp with a direct halogen-style solution. Its standard fog lamp construction, C-8 filament, and clear bulb finish support consistent light output in the applications listed below. This part cross-references Standard Ignition 27562 for the same application. Search terms such as H1B1 fog light bulb, Phillips H1B1 replacement bulb, and halogen fog lamp bulb for Ford Escape or Volkswagen Amarok can help narrow the correct fitment.\u003c\/p\u003e\u003cp\u003eConfirmed fitment includes applications such as Fits 2018-2020 Ford Escape, high beam; Fits 2014-2020 Ford Transit Custom, high beam; Fits 2011-2019 Volkswagen Amarok, high beam; and Fits 2007-2013 BMW X5, high beam for vehicles with halogen capsule headlights. It also appears in listings for Ford EcoSport, Kia Rio, Audi A1, Mercedes-Benz Vito, and Hyundai Elantra across the model years shown in the fitment data.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring reduced fog lamp or exterior beam output\u003c\/li\u003e\n\u003cli\u003eReplacing a burned-out halogen bulb\u003c\/li\u003e\n\u003cli\u003eAddressing uneven or discolored light from an aging bulb\u003c\/li\u003e\n\u003cli\u003eMaintaining proper forward visibility in low-light driving\u003c\/li\u003e\n\u003cli\u003eReturning the vehicle to the specified bulb type for the listed application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the bulb base, voltage, wattage, and headlamp or fog lamp configuration before installation. Match the vehicle’s original bulb type and confirm whether the application is for high beam, low beam, front, or fog lamp use as listed in the fitment table. Handle the glass capsule carefully and avoid touching the bulb surface with bare fingers.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard bulbs are positioned as OE-quality replacements, reflecting the same type of lighting standard Phillips supplies to automakers worldwide. The H1B1 is DOT approved and built for direct replacement in the specified applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571952812213,"sku":"BCGL-H1B1","price":11.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H1B1_Fro_3c1f4ce5-11ba-4f2d-ab87-ce0597e036cd.jpg?v=1774971666"},{"product_id":"phillips-h1c1-fog-light-bulb","title":"Phillips H1C1 Fog Light Bulb - Front, High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhillips H1C1 Halogen Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H1C1 is a DOT approved halogen fog light bulb built to OE-style standards for clear, dependable exterior lighting. It uses a 12-volt, 55-watt glass capsule with a clear finish and P14,5s base for direct replacement in many fog lamp and exterior lighting applications.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack is the brand line focused on original equipment quality and everyday value. It is designed for drivers who want a standard replacement bulb that matches the type of lighting automakers use across a wide range of vehicles, including Ford EcoSport, Ford Escape, and Volkswagen Amarok applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHalogen bulb technology for standard fog lamp use\u003c\/li\u003e\n\u003cli\u003e12V, 55W output with 4.58333333333333 amp rating\u003c\/li\u003e\n\u003cli\u003eClear glass bulb with clear finish\u003c\/li\u003e\n\u003cli\u003eP14,5s base type for specified vehicle applications\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use where required\u003c\/li\u003e\n\u003cli\u003eSingle-filament design with C-8 filament type\u003c\/li\u003e\n\u003cli\u003eOE-quality replacement from Phillips Standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003ePart number H1C1 is a standard halogen replacement bulb engineered for exterior lighting positions listed in the fitment data, including fog light, high beam, low beam, and front applications depending on vehicle configuration. With a compact 0.33 diameter and 2.46 length, it is sized for the specified housings and supports direct bulb replacement on many models from Ford, Volkswagen, Hyundai, Kia, Audi, BMW, Mercedes-Benz, Volvo, and others. This part cross-references 94830 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Bulb Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or burned-out fog light output\u003c\/li\u003e\n\u003cli\u003eReduced forward visibility in low-light or poor-weather driving\u003c\/li\u003e\n\u003cli\u003eUneven lighting caused by an aging halogen bulb\u003c\/li\u003e\n\u003cli\u003eNeed for a direct replacement bulb with the correct base and wattage\u003c\/li\u003e\n\u003cli\u003eRestoring exterior lighting on vehicles such as Ford Focus, Kia Rio, and Audi A6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment Tips\u003c\/h2\u003e\u003cp\u003eVerify the bulb base, wattage, and position before installation. Fitment varies by year, make, model, and headlamp configuration, so confirm whether your vehicle uses fog lamp, high beam, low beam, or front placement as listed. Fits 2018-2020 Ford Escape, high beam for vehicles with HID headlights; fits 2011-2019 Volkswagen Amarok, high beam; fits 2004-2008 Acura TSX, high beam. Additional confirmed applications include 2015-2018 Ford Focus, high beam or N\/A for vehicles with halogen capsule headlights, and 2006-2008 Audi A6, high beam for vehicles with halogen capsule headlights.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard bulbs are positioned as OE-quality replacements, reflecting the same type of lighting standards used by automakers worldwide. The H1C1 is DOT approved and built with halogen glass construction for standard automotive lighting service.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571953598645,"sku":"BCGL-H1C1","price":9.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H1C1_Fro_ac6cdf2c-6022-472a-9af7-12cbc03ba7de.jpg?v=1774971667"},{"product_id":"phillips-h1mdc1-fog-light-bulb","title":"Phillips H1MDC1 Fog Light Bulb - Front, High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhillips MasterDuty H1MDC1 Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips MasterDuty Single Commercial Pack H1MDC1 is a 12-volt halogen fog light bulb built for medium- and heavy-duty use where vibration and stress are part of the job. With a clear glass bulb, DOT approval, and a standard fog lamp design, it delivers a direct-fit lighting solution for a wide range of vehicles, including Ford Transit Custom, Volkswagen Amarok, and Hyundai Creta applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen fog light bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003e12V, 55W output for standard fog lamp applications\u003c\/li\u003e\n\u003cli\u003eP14,5s base type with single-filament C-8 design\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eBuilt for class 2-8 truck applications and high-vibration environments\u003c\/li\u003e\n\u003cli\u003eFits a broad range of vehicles across Ford, Volkswagen, Hyundai, Kia, Audi, Mercedes-Benz, and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhillips MasterDuty is the commercial-duty lighting line from Phillips, focused on durability in demanding operating conditions. The H1MDC1 uses halogen technology, a clear finish, and a glass bulb body to support consistent exterior lighting performance. Its compact 0.33-inch diameter and 2.46-inch length help it match the original bulb form factor in many fog light and headlamp positions. This part number, H1MDC1, is listed across numerous fitments such as 2018-2020 Ford Escape, 2011-2019 Volkswagen Amarok, and 2017-2019 Hyundai Creta, making it a practical choice for drivers and fleets that need a dependable replacement bulb.\u003c\/p\u003e\u003cp\u003eThis part cross-references common H1 applications for the same bulb style and base configuration.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores fog light output when the original bulb is dim or burned out\u003c\/li\u003e\n\u003cli\u003eReplaces a failed high beam or low beam bulb in listed halogen applications\u003c\/li\u003e\n\u003cli\u003eAddresses uneven forward lighting caused by aging filament wear\u003c\/li\u003e\n\u003cli\u003eHelps correct reduced visibility in fog, rain, and low-light driving\u003c\/li\u003e\n\u003cli\u003eSupports fleet maintenance on commercial vehicles exposed to vibration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the bulb base, voltage, wattage, and lamp position before installation. This H1MDC1 bulb is used in multiple positions depending on the vehicle, including fog light, high beam, and low beam applications, so match the original bulb specification exactly. For best results, avoid touching the glass with bare hands and confirm proper alignment after installation. Fitment examples include 2014-2020 Ford Transit Custom, 2015-2019 Ram 700, and 2007-2013 BMW X5, with position and headlamp configuration noted in the vehicle listing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips MasterDuty bulbs are engineered for commercial-duty service and are designed to withstand extreme stress and vibration in medium- and heavy-duty vehicle use. DOT approval adds an additional compliance check for road-going applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571957563573,"sku":"BCGL-H1MDC1","price":10.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H1MDC1_Fro_6fa76a36-a606-4ec4-932c-fc18d0aa9ba7.jpg?v=1774971667"},{"product_id":"phillips-h1vpb1-fog-light-bulb","title":"Phillips H1VPB1 Fog Light Bulb - Front, High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhilips VisionPlus H1 Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eThe Philips VisionPlus H1 fog light bulb is a 12V halogen replacement built for clearer forward lighting in vehicles that use an H1\/P14,5s bulb base. With a clear glass bulb and DOT approval, it is a practical choice for drivers looking to restore lighting performance on applications such as Ford Focus, Volkswagen Amarok, and Audi A6 models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen VisionPlus bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003e12V, 55W output for standard automotive lighting systems\u003c\/li\u003e\n\u003cli\u003eH1 bulb format with P14,5s base\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eSingle-filament design for focused beam output\u003c\/li\u003e\n\u003cli\u003ePhilips VisionPlus line for improved visibility over standard minimum legal requirements in low-beam testing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhillips H1VPB1 is part of the VisionPlus - Single Blister Pack line, a Philips lighting range focused on upgraded road visibility in halogen applications. This bulb uses a C-8 filament, glass bulb material, and a clear finish to deliver consistent light output in compatible fog light, high beam, and low beam applications listed in the fitment data. Philips VisionPlus headlights are described by the manufacturer as producing up to 60% more vision compared with standard minimum legal requirements in low-beam test results, helping drivers see farther in supported applications. This part cross-references BPH1ND and H1ST for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring dim or worn halogen fog light output\u003c\/li\u003e\n\u003cli\u003eReplacing a failed H1 bulb in projector or reflector headlamp systems\u003c\/li\u003e\n\u003cli\u003eImproving visibility on night driving routes and low-light roads\u003c\/li\u003e\n\u003cli\u003eAddressing uneven or reduced beam performance in compatible vehicles\u003c\/li\u003e\n\u003cli\u003eServicing lighting on Ford EcoSport, Ford Focus, and Volkswagen Amarok applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment Tips\u003c\/h2\u003e\u003cp\u003eVerify the bulb base, voltage, and wattage before installation. This H1 bulb is listed for a wide range of vehicles and positions, including Fits 2018-2020 Ford Escape, high beam; Fits 2005-2018 Ford Focus, high beam; Fits 2020 Volkswagen Amarok, high beam; Fits 2006-2008 Audi A6, high beam; and Fits 2015-2019 Ram 700, low beam. Some applications note halogen capsule headlights, HID-equipped vehicles, or projector headlamp requirements, so match the original bulb specification and position exactly. Handle the glass bulb carefully and avoid touching the glass surface during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips VisionPlus lighting is built around road-focused halogen performance and is DOT approved. The manufacturer positions this bulb line as an upgrade over standard minimum legal lighting output in low-beam testing, making it a dependable replacement option for drivers who want consistent visibility from a recognized automotive lighting brand.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571967623349,"sku":"BCGL-H1VPB1","price":15.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H1VPB1_Fro.jpg?v=1774971668"},{"product_id":"phillips-h1vpb2-fog-light-bulb","title":"Phillips H1VPB2 Fog Light Bulb - Front, High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhillips VisionPlus H1 Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips VisionPlus H1VPB2 is a 12-volt halogen bulb built for drivers who want clearer forward lighting from a DOT approved replacement. With a clear glass design, 55-watt output, and VisionPlus optics, it is engineered to deliver up to 60% more vision than standard minimum legal low-beam requirements, helping improve visibility on the road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen VisionPlus bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003e12V, 55W output for exterior lighting applications\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eP14,5s base type with C-8 filament design\u003c\/li\u003e\n\u003cli\u003eFits a wide range of vehicles including Ford Focus, Ford Escape, Volkswagen Amarok, and Audi A1 applications\u003c\/li\u003e\n\u003cli\u003ePart number H1VPB2 for easy catalog lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVisionPlus Product Line Details\u003c\/h2\u003e\u003cp\u003ePhillips VisionPlus is the brand’s enhanced-visibility halogen line. This bulb line is focused on improving usable forward light without changing the basic halogen format, making it a practical choice for drivers replacing an H1 bulb in fog light, high beam, or low beam positions where listed.\u003c\/p\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Phillips H1VPB2 uses halogen bulb technology with a clear bulb finish and glass construction for consistent light output. Its 0.33-inch diameter and 2.46-inch length support OE-style fitment in applications calling for an H1 bulb with a P14,5s base. The VisionPlus design is intended to increase forward visibility while staying within standard 12V, 55W electrical requirements. This part cross-references H1-55NH\/BP2 and BPH1ND2 for the same application.\u003c\/p\u003e\u003cp\u003eFitment coverage includes long-tail applications such as Fits 2018-2020 Ford Escape, high beam for vehicles with HID headlights; Fits 2015-2018 Ford Focus, high beam for vehicles with halogen capsule headlights; Fits 2007-2013 BMW X5, high beam for vehicles with halogen capsule headlights; and Fits 2002-2008 Audi A6, high beam for vehicles with halogen capsule headlights. It also appears in Ford EcoSport, Volkswagen Amarok, Hyundai Creta, Kia Rio, and Mercedes-Benz A200 applications where an H1 bulb is specified.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring dim, worn, or aging halogen lighting output\u003c\/li\u003e\n\u003cli\u003eReplacing a failed H1 bulb in high beam or low beam applications\u003c\/li\u003e\n\u003cli\u003eImproving forward visibility in fog light or projector-style headlamp setups where listed\u003c\/li\u003e\n\u003cli\u003eAddressing uneven light output between left and right lamps\u003c\/li\u003e\n\u003cli\u003eMaintaining DOT approved lighting performance in supported vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the bulb base type, voltage, wattage, and position before installation. This H1 bulb is listed across multiple positions including high beam, low beam, front, and N\/A fitments, so confirm the exact application in your vehicle’s lighting system. Handle the glass bulb carefully and avoid touching the glass surface with bare hands during installation. For best results, replace bulbs in matched pairs when light output has noticeably changed between sides.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips VisionPlus bulbs are built to meet DOT approval requirements and are backed by Phillips’ established lighting engineering standards. The H1VPB2 is designed as a direct halogen replacement for supported applications, with fitment coverage spanning 1986-2020 vehicles across Ford, Volkswagen, Audi, BMW, Kia, Hyundai, Mercedes-Benz, and more.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571969556661,"sku":"BCGL-H1VPB2","price":21.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H1VPB2_Fro.jpg?v=1774971668"},{"product_id":"phillips-h11bb1-fog-light-bulb","title":"Phillips H11BB1 Fog Light Bulb - High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003eOE-Style Halogen Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H11BB1 is a standard halogen fog light bulb built for drivers who want original-equipment lighting quality in a straightforward replacement. With a clear glass capsule, 12-volt operation, and 55-watt output, it supports dependable exterior lighting performance for a wide range of Hyundai and Kia applications, including Rio, Veloster, Santa Fe, Sportage, and Optima models.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Blister Pack focuses on OE-level fit and function for everyday repairs. This H11 halogen bulb is DOT approved and uses a PGJ13 base, making it a direct choice for vehicles that call for an H11-style fog light or low beam bulb.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number H11BB1 for easy identification\u003c\/li\u003e\n\u003cli\u003eHalogen standard capsule bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003e12V, 55W output for exterior lighting applications\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eSingle-filament design with C-8 filament type\u003c\/li\u003e\n\u003cli\u003ePGJ13 bulb base for H11-style fitment\u003c\/li\u003e\n\u003cli\u003eOE-quality standard range from Phillips\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Phillips Standard range is engineered to match the same original equipment quality used in lighting supplied to automakers worldwide. For shoppers searching for an H11 fog light bulb for a 2012-2018 Kia Rio, 2012-2017 Hyundai Veloster, or 2013-2016 Hyundai Santa Fe, the H11BB1 offers a practical replacement option with the correct halogen capsule format and clear bulb finish. It also cross-references BP1255H11B for the same application.\u003c\/p\u003e\u003cp\u003eUse this bulb when you need a direct replacement for low beam or fog light service on supported Hyundai and Kia vehicles. The H11BB1 part number is also a useful reference when comparing listings for a Philips H11 halogen bulb, especially for projector-type headlamp and halogen capsule headlamp applications.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Bulb Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or failed fog light output\u003c\/li\u003e\n\u003cli\u003eBurned-out low beam bulb on supported Hyundai and Kia models\u003c\/li\u003e\n\u003cli\u003eUneven forward lighting from aging halogen capsules\u003c\/li\u003e\n\u003cli\u003eNeed for a DOT approved replacement bulb\u003c\/li\u003e\n\u003cli\u003eRestoring proper exterior light function after bulb failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2012-2018 Kia Rio, low beam, compatible with vehicles equipped with projector-type headlamps.\u003c\/li\u003e\n\u003cli\u003eFits 2012-2017 Hyundai Veloster, low beam, compatible with vehicles equipped with projector-type headlamps.\u003c\/li\u003e\n\u003cli\u003eFits 2014-2017 Kia Rondo, low beam, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2016 Hyundai Genesis, high beam.\u003c\/li\u003e\n\u003cli\u003eFits 2013-2016 Hyundai Santa Fe, low beam, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2014-2016 Kia Sportage, low beam, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2014-2015 Kia Optima, low beam.\u003c\/li\u003e\n\u003cli\u003eFits 2012-2013 Ford Fiesta, low beam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the existing bulb base and headlamp type before installation. This bulb is used in low beam, high beam, and select N\/A interior-style applications listed in the fitment data, so vehicle configuration matters. For Hyundai Genesis, note the 2014 fitment applies from 2\/12\/2014, and for 2010 Kia Sportage high beam fitment applies from 4\/29\/2010.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard bulbs are positioned as OE-quality lighting replacements, with DOT approval and specifications aligned to common factory halogen requirements. The H11BB1 is built for consistent fitment and dependable service in supported Hyundai and Kia lighting applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571970638005,"sku":"BCGL-H11BB1","price":19.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H11BB1_Fro.jpg?v=1774971669"},{"product_id":"phillips-h11bc1-fog-light-bulb","title":"Phillips H11BC1 Fog Light Bulb - High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhilips H11BC1 Fog Light Bulb Overview\u003c\/h2\u003e\u003cp\u003eThe Philips H11BC1 is a halogen fog light bulb built to OE-style standards for drivers who want a direct replacement with clear output and dependable fitment. It uses a 12V, 55W design with a PGJ19-2 base and clear glass construction for consistent exterior lighting performance.\u003c\/p\u003e\u003cp\u003ePhilips Standard - Single Commercial Pack focuses on original equipment quality for everyday replacement needs. For vehicles such as the Kia Optima, Hyundai Santa Fe, and Kia Sportage, this H11 bulb supports common low beam and fog light applications where an H11 halogen capsule is specified.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number H11BC1 for easy identification\u003c\/li\u003e\n\u003cli\u003eHalogen standard capsule bulb with clear finish\u003c\/li\u003e\n\u003cli\u003e12-volt, 55-watt exterior lighting application\u003c\/li\u003e\n\u003cli\u003ePGJ19-2 bulb base for proper socket fitment\u003c\/li\u003e\n\u003cli\u003eDOT approved for road-use compliance\u003c\/li\u003e\n\u003cli\u003eGlass bulb material with single-filament C-8 design\u003c\/li\u003e\n\u003cli\u003eOE-quality replacement from Philips Standard line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhilips Standard bulbs are positioned as original-equipment-style replacements, using the same type of lighting technology found in many factory applications. The H11BC1 is a clear halogen bulb with a 0.46-inch diameter and 3.07-inch length, making it a direct-fit option for vehicles that call for an H11\/PGJ19-2 fog light or low beam bulb. This part number is commonly searched for Kia Optima H11 fog light bulb replacement, Hyundai Santa Fe low beam bulb replacement, and Kia Sportage halogen capsule bulb replacement.\u003c\/p\u003e\u003cp\u003eThe Philips H11BC1 part number also appears in fitment for select Ford Fiesta, Hyundai Genesis, Hyundai Elantra, and Kia Rondo applications. If your vehicle uses an H11 halogen capsule in the listed position, this bulb provides a straightforward OE-style service replacement.\u003c\/p\u003e\u003ch2\u003eWhat This Bulb Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or failed fog light output\u003c\/li\u003e\n\u003cli\u003eLow beam bulb burnout on halogen-equipped vehicles\u003c\/li\u003e\n\u003cli\u003eUneven exterior lighting caused by aging bulbs\u003c\/li\u003e\n\u003cli\u003eNeed for a direct replacement H11 halogen capsule\u003c\/li\u003e\n\u003cli\u003eRestoring factory-style lighting performance on listed Kia and Hyundai models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the bulb base type, voltage, and position before installation. This H11BC1 is listed for low beam, high beam, and fog light-related applications depending on the vehicle and headlamp configuration. Confirm whether your vehicle uses projector-type headlamps or halogen capsule headlights where noted in the fitment data. Handle the glass bulb carefully and avoid touching the glass surface with bare fingers during installation.\u003c\/p\u003e\u003cp\u003eFits 2012-2018 Kia Rio, low beam; 2012-2017 Hyundai Veloster, low beam; 2014-2017 Kia Rondo, low beam; 2016 Hyundai Genesis, high beam; 2013-2016 Hyundai Santa Fe, low beam; 2013-2016 Hyundai Santa Fe Sport, low beam; 2013-2016 Hyundai Santa Fe XL, low beam; 2014-2016 Kia Forte Koup, N\/A; 2014-2016 Kia Forte5, N\/A; 2014-2016 Kia Sportage, low beam; 2014-2015 Kia Optima, low beam; 2008-2010 Kia Optima, low beam; 2014 Hyundai Genesis, high beam and low beam; 2014 Kia Sedona, low beam; 2008-2012 Kia Sedona, low beam; 2012-2013 Ford Fiesta, low beam; 2010-2013 Kia Forte, low beam; 2010-2013 Kia Forte Koup, low beam; 2012-2013 Kia Forte5, low beam; 2011-2013 Kia Optima, low beam; 2012-2013 Kia Soul, low beam; 2011-2013 Kia Sportage, low beam; 2010-2012 Hyundai Genesis Coupe, low beam; 2010-2012 Hyundai Santa Fe, low beam; 2007-2012 Kia Rondo, low beam; 2011 Ford Fiesta, low beam; 2009-2011 Kia Borrego, low beam; 2008-2010 Hyundai Azera, low beam; 2007-2010 Hyundai Elantra, low beam; 2008-2010 Hyundai Entourage, low beam; 2009-2010 Hyundai Sonata, low beam; 2008-2010 Kia Magentis, low beam; 2010 Kia Sportage, high beam; 2009 Hyundai Santa Fe, N\/A; 2009 Hyundai Santa Fe, low beam; 2009 Kia Amanti, N\/A; 2007-2009 Kia Amanti, low beam; 2007-2009 Kia Sorento, low beam; 2007 Hyundai Azera, low beam; 2007 Hyundai Entourage, low beam; 2007 Kia Magentis, low beam; 2007 Kia Optima, low beam; 2007 Kia Sedona, low beam.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips Standard lighting is built around OE-quality replacement standards used across global automaker applications. The H11BC1 is DOT approved and uses a halogen capsule design intended for consistent exterior lighting service in the listed vehicles.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571972276405,"sku":"BCGL-H11BC1","price":19.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H11BC1_Fro.jpg?v=1774971669"},{"product_id":"phillips-h11cvpb1-fog-light-bulb","title":"Phillips H11CVPB1 Fog Light Bulb","description":"\u003ch2\u003eCrystalVision Platinum H11 Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eUpgrade exterior lighting with the Philips CrystalVision Platinum H11 fog light bulb. This halogen capsule uses an ultra-white gradient coating to produce a cleaner, whiter beam with up to 4000K color temperature and up to 60% more vision than a standard halogen bulb.\u003c\/p\u003e\u003cp\u003eBuilt for drivers who want a sharper look without giving up road safety, this DOT approved bulb is a direct-fit option for many halogen-equipped vehicles, including select Ford F-150, Honda Civic, Nissan Altima, and Toyota Tacoma applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePhilips CrystalVision Platinum line for a whiter, more modern exterior lighting appearance\u003c\/li\u003e\n\u003cli\u003eUp to 4000K brilliant white light output\u003c\/li\u003e\n\u003cli\u003eUp to 60% more vision versus standard halogen bulbs\u003c\/li\u003e\n\u003cli\u003eHalogen standard capsule design with PGJ19-2 base\u003c\/li\u003e\n\u003cli\u003e12V, 55W electrical rating for common fog light and low beam applications\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eClear glass bulb construction with clear finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details\u003c\/h2\u003e\u003cp\u003eThe CrystalVision Platinum line is designed for drivers who want an upgraded white-light appearance while staying within a halogen bulb format. The ultra-white coating helps create a cleaner front-end look, making it a strong choice for vehicles such as the Ford Edge, Jeep Compass, Nissan Sentra, and Subaru Crosstrek when the vehicle uses the correct H11 halogen capsule specification.\u003c\/p\u003e\u003cp\u003ePart number H11CVPB1 is also referenced as H11SU for interchange purposes.\u003c\/p\u003e\u003ch2\u003eWhat This Bulb Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDull or yellowed halogen fog light output\u003c\/li\u003e\n\u003cli\u003eReduced forward visibility in low-light driving\u003c\/li\u003e\n\u003cli\u003eOutdated bulb color on vehicles with factory halogen lighting\u003c\/li\u003e\n\u003cli\u003eReplacement needs for burned-out H11 fog light or low beam bulbs\u003c\/li\u003e\n\u003cli\u003eDrivers seeking a whiter beam without changing to a different lighting technology\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment Tips\u003c\/h2\u003e\u003cp\u003eFits 2021-2022 Chrysler Voyager, low beam. Fits 2021-2022 Ford Edge, low beam, for vehicles equipped with halogen lamp headlights. Fits 2021-2022 Ford F-150, low beam. Fits 2021-2022 Ford Transit, high beam and low beam, for vehicles equipped with halogen lamp headlights. Fits 2021-2022 Honda HR-V, low beam. Fits 2021-2022 Nissan Altima, low beam. Fits 2021-2022 Toyota Tacoma, low beam.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConfirm the vehicle uses an H11\/PGJ19-2 halogen capsule before installation.\u003c\/li\u003e\n\u003cli\u003eReview headlamp type notes carefully; some applications are not for projector-type or HID-equipped vehicles.\u003c\/li\u003e\n\u003cli\u003eMatch the original bulb base and wattage to the replacement bulb.\u003c\/li\u003e\n\u003cli\u003eUse the vehicle fitment notes for low beam, high beam, or fog light positions as listed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips manufactures this bulb as a DOT approved halogen lighting replacement for select applications. The CrystalVision Platinum design focuses on a balance of appearance and usable light output for everyday driving.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43571987251381,"sku":"BCGL-H11CVPB1","price":20.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H11CVPB1_Fro_5eb72e11-9acf-4501-b0af-6dd61c3bd0b8.jpg?v=1774971670"},{"product_id":"phillips-h11vpb1-fog-light-bulb","title":"Phillips H11VPB1 Fog Light Bulb","description":"\u003ch2\u003ePhillips VisionPlus H11 Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips VisionPlus H11 fog light bulb is a halogen replacement built for drivers who want clearer forward lighting from a DOT approved bulb. With a clear glass design, 12V operation, and 55W output, this H11VPB1 bulb is made for halogen lamp headlight and fog light applications where improved visibility matters.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVisionPlus bulb technology for up to 60% more vision in low beam testing versus standard minimum legal requirements\u003c\/li\u003e\n\u003cli\u003eH11 bulb with PGJ19-2 base for direct-fit halogen applications\u003c\/li\u003e\n\u003cli\u003e12V, 55W output with a single filament design\u003c\/li\u003e\n\u003cli\u003eClear glass construction and clear bulb finish\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003ePart number H11VPB1 for easy lookup and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details\u003c\/h2\u003e\u003cp\u003ePhillips VisionPlus is the brand line focused on improved road visibility in halogen lighting systems. This H11VPB1 bulb is designed for drivers who need a brighter, clearer beam pattern than a standard minimum-spec halogen bulb while staying within a conventional 55W, 12V setup.\u003c\/p\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePhillips H11VPB1 is a VisionPlus halogen bulb engineered for exterior lighting applications such as fog lights and select low beam or high beam positions, depending on vehicle design. The bulb uses a glass body, C-8 filament, and PGJ19-2 base, making it a practical replacement for vehicles equipped with halogen capsule headlights. Fitment includes applications such as 2021-2022 Ford Edge low beam, 2021-2022 Nissan Altima low beam, and 2019-2020 Chevrolet Silverado 1500 low beam. It also appears in broader fitment coverage for vehicles like the Honda Civic, Toyota Tacoma, and Ram ProMaster series. This part cross-references BPH11ND and H11ST for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDull or reduced forward lighting from an aging halogen bulb\u003c\/li\u003e\n\u003cli\u003ePoor visibility in fog light or low beam driving conditions\u003c\/li\u003e\n\u003cli\u003eNeed for a DOT approved H11 replacement bulb\u003c\/li\u003e\n\u003cli\u003eIncorrect bulb match when replacing an H11 halogen capsule\u003c\/li\u003e\n\u003cli\u003eLoss of clarity in vehicles such as Ford F-150, Nissan Sentra, and Toyota Tacoma applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses an H11 bulb with a PGJ19-2 base before installation. This bulb is for halogen lamp headlights and fog light applications only, and fitment notes should be checked carefully for projector-type headlamps, HID systems, or Eyesight-equipped Subaru models where listed. Compare the original bulb shape and connector before installing the H11VPB1.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips VisionPlus bulbs are built to DOT approval standards and use halogen bulb construction for consistent exterior lighting performance. The manufacturer states this bulb line delivers increased vision in low beam testing compared with standard minimum legal requirements.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572007731381,"sku":"BCGL-H11VPB1","price":22.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H11VPB1_Fro_569b7ebe-ea7a-47f9-b013-04b115b4baaf.jpg?v=1774971673"},{"product_id":"phillips-h11vpb2-fog-light-bulb","title":"Phillips H11VPB2 Fog Light Bulb","description":"\u003ch2\u003ePhillips VisionPlus H11 Fog Light Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips VisionPlus H11VPB2 is a halogen fog light bulb built for drivers who want clearer forward visibility from a DOT approved replacement. With a clear glass design, 12V operation, and 55W output, it is made for vehicles that use an H11\/PGJ19-2 bulb base in low beam or fog light applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen VisionPlus bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003eUp to 60% more vision versus standard minimum legal low beam test requirements, according to Philips\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003e12V, 55W electrical rating\u003c\/li\u003e\n\u003cli\u003eH11 bulb type with PGJ19-2 base\u003c\/li\u003e\n\u003cli\u003eClear bulb finish and single-filament design\u003c\/li\u003e\n\u003cli\u003eCross-reference part numbers include BPH11ND2 and H11ST-2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVisionPlus Product Line Details\u003c\/h2\u003e\u003cp\u003ePhillips VisionPlus is the brand’s upgraded halogen lighting line for drivers who want more usable road illumination than a standard replacement bulb. The VisionPlus H11VPB2 is aimed at low beam and fog light positions where added reach and visibility matter, while keeping the familiar fit and function of an H11 halogen bulb.\u003c\/p\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePart number H11VPB2 is a Phillips VisionPlus H11 fog light bulb designed for vehicles that specify an H11 bulb with a PGJ19-2 base. It uses halogen technology, a glass bulb material, and a clear finish to deliver a direct replacement option for many late-model cars, trucks, and SUVs. Philips states VisionPlus bulbs provide up to 60% more vision in low beam testing compared with standard minimum legal requirements, helping drivers see farther down the road.\u003c\/p\u003e\u003cp\u003eFitment coverage includes applications such as the 2021-2022 Ford Edge low beam, 2021-2022 Honda HR-V low beam, 2021-2022 Nissan Sentra low beam, and 2021-2022 Toyota Tacoma low beam. It also appears across many other vehicles including the Chrysler Voyager, Ram 1500, Subaru Crosstrek, and Chevrolet Colorado in listed low beam or fog light positions. Always confirm the original bulb type and headlamp configuration before installation.\u003c\/p\u003e\u003cp\u003eThis part cross-references BPH11ND2 and H11ST-2 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or worn halogen fog light output\u003c\/li\u003e\n\u003cli\u003eReduced forward visibility in low-light driving\u003c\/li\u003e\n\u003cli\u003eNeed for a DOT approved H11 replacement bulb\u003c\/li\u003e\n\u003cli\u003eReplacement of a failed low beam or fog light bulb\u003c\/li\u003e\n\u003cli\u003eRestoring factory-style lighting performance on H11-equipped vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify the vehicle uses an H11 bulb with a PGJ19-2 base before installation.\u003c\/li\u003e\n\u003cli\u003eCheck whether the application is for low beam, high beam, front, or fog light use as listed in the fitment data.\u003c\/li\u003e\n\u003cli\u003eSome vehicles in the fitment list require halogen lamp headlights or halogen capsule headlights only.\u003c\/li\u003e\n\u003cli\u003eDo not install in projector-type headlamps where the fitment notes state not compatible.\u003c\/li\u003e\n\u003cli\u003eHandle the glass bulb carefully during installation to avoid contamination or damage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips VisionPlus bulbs are DOT approved and built to meet the electrical and dimensional requirements listed for this application. The H11VPB2 is specified as a 12V, 55W halogen bulb with a clear glass construction for consistent replacement use.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572008059061,"sku":"BCGL-H11VPB2","price":33.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H11VPB2_Fro_f6c5461d-365c-46b7-9019-c4162cd9e305.jpg?v=1774971673"},{"product_id":"phillips-h15b1-headlight-bulb","title":"Phillips H15B1 Headlight Bulb - Front, High Beam or Low Beam","description":"\u003ch2\u003eOE-Style Halogen Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H15B1 is a 12-volt halogen headlight bulb built for drivers who want original-equipment quality in a standard replacement format. It uses a clear glass capsule and dual-filament design to deliver the correct lighting output for supported high beam and daytime running light applications.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Blister Pack is the brand line for straightforward OE-style replacement lighting. It focuses on dependable fit and function for everyday repairs, making it a practical choice for vehicles that use halogen capsule headlamps.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number H15B1 for direct catalog lookup\u003c\/li\u003e\n\u003cli\u003e12V halogen bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003eDual-filament design with C-8 filament type\u003c\/li\u003e\n\u003cli\u003ePGJ23t-1 bulb base type\u003c\/li\u003e\n\u003cli\u003e55\/15 wattage and 4.58\/1.25 amp rating\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use where specified by the vehicle application\u003c\/li\u003e\n\u003cli\u003eStandard capsule bulb format for exterior lighting service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Phillips H15B1 headlight bulb is engineered to match the original equipment standard used in many halogen lighting systems. With a clear finish, glass bulb material, and 2-filament construction, it is suited for vehicles that require a halogen capsule bulb for high beam or daytime running light operation. This part number is commonly searched for fitment on Ford Edge, Mercedes-Benz Metris, and Volkswagen e-Golf applications, along with other halogen-equipped models listed below.\u003c\/p\u003e\u003cp\u003eUse H15B1 when you need a replacement bulb that follows the OE-style specification rather than an upgraded lighting conversion. The Standard range is positioned as a value-focused replacement line that mirrors the quality level automakers use in factory lighting systems.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2021-2022 Ford Edge, N\/A, compatible with vehicles equipped with halogen lamp headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2021-2022 Ford Edge, N\/A, for vehicles with HID headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2021-2022 Lincoln Nautilus, N\/A.\u003c\/li\u003e\n\u003cli\u003eFits 2016-2021 Mercedes-Benz Metris, High Beam.\u003c\/li\u003e\n\u003cli\u003eFits 2020 Dodge Neon, Low Beam.\u003c\/li\u003e\n\u003cli\u003eFits 2020 Ford Transit Connect, Low Beam, for vehicles with Halogen Capsule Headlamps.\u003c\/li\u003e\n\u003cli\u003eFits 2018-2020 Ford Transit Custom, High Beam, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2014-2020 Mercedes-Benz GLA250, High Beam, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2019-2020 Mercedes-Benz Sprinter 1500, High Beam, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2020 Volkswagen e-Golf, High Beam, for high beam and day driving lights.\u003c\/li\u003e\n\u003cli\u003eFits 2016-2019 Jaguar XE, High Beam, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2015-2019 Land Rover Discovery Sport, High Beam, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2014-2018 Audi A3, High Beam, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003cli\u003eFits 2010-2018 Volkswagen Golf, N\/A, for vehicles with halogen capsule headlights.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores a failed halogen headlight bulb in supported vehicles\u003c\/li\u003e\n\u003cli\u003eReplaces a dim or intermittent high beam bulb\u003c\/li\u003e\n\u003cli\u003eAddresses daytime running light output loss on listed applications\u003c\/li\u003e\n\u003cli\u003eSolves bulb-out warnings caused by a worn capsule bulb\u003c\/li\u003e\n\u003cli\u003eReturns proper forward lighting after filament failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the original bulb base, wattage, and headlamp type before installation. This H15B1 bulb is intended for vehicles equipped with the matching halogen capsule headlamp setup, and some fitments note specific conditions such as HID headlights, halogen lamp headlights, or driving-on-the-right configurations. Compare the replacement bulb to the original part before installing to verify the correct application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard bulbs are positioned as OE-quality replacement lighting, using the same general standard expected in factory-installed automotive lamps. The H15B1 is DOT approved for listed applications and built to support consistent exterior lighting performance in compatible vehicles.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572009795765,"sku":"BCGL-H15B1","price":21.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H15B1_Fro_670cbd4c-26e6-4566-a3ca-c08f234db2b5.jpg?v=1774971674"},{"product_id":"phillips-h16c1-fog-light-bulb","title":"Phillips H16C1 Fog Light Bulb - Front or Rear","description":"\u003ch2\u003eOE-Style Fog Light Bulb for Select Vehicles\u003c\/h2\u003e\u003cp\u003eThe Phillips H16C1 fog light bulb is a 12-volt halogen replacement built to match original equipment standards used by automakers worldwide. It delivers clear light output in a compact fog lamp bulb format for select Subaru, Toyota, Mitsubishi, Nissan, Lexus, Smart, and Ferrari applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHalogen fog lamp bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003e12V, 19W output for fog light applications\u003c\/li\u003e\n\u003cli\u003ePGJ19-3 bulb base type\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eSingle-filament design with C-8 filament type\u003c\/li\u003e\n\u003cli\u003eOE-quality replacement from Phillips Standard range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePhillips Standard Range Details\u003c\/h2\u003e\u003cp\u003ePhillips Standard - Multiple Commercial Pack is positioned as an OE-quality lighting line for drivers who want a direct replacement that follows the same standards used in factory lighting systems. The H16C1 part number is part of that Standard range, making it a practical choice for restoring fog lamp performance on vehicles such as the Subaru Forester, Toyota Tacoma, and Toyota RAV4 when the correct bulb specification is required.\u003c\/p\u003e\u003cp\u003eThis part number, H16C1, is also a fitment-based replacement for a wide range of front fog lamp and capsule headlight applications across model years from 2009 through 2022. It cross-references Philips H16 and H16LL applications for the same bulb type.\u003c\/p\u003e\u003ch2\u003eWhat This Bulb Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aging fog light output\u003c\/li\u003e\n\u003cli\u003eBurned-out fog lamp bulb replacement\u003c\/li\u003e\n\u003cli\u003eRestoring clear forward visibility in low-visibility conditions\u003c\/li\u003e\n\u003cli\u003eReplacing a factory-style halogen bulb with the correct PGJ19-3 base\u003c\/li\u003e\n\u003cli\u003eMaintaining proper lighting performance on vehicles with halogen capsule headlights\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the bulb base, wattage, and vehicle-specific fog lamp or headlamp application before installation. This H16C1 bulb is used in front and rear positions depending on the vehicle listing, so match the exact fitment row for your year, make, model, and position. Handle the glass bulb carefully and avoid touching the glass surface with bare fingers during installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2021-2022 Subaru Crosstrek, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2021-2022 Subaru Forester, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2021-2022 Subaru Impreza, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2021-2022 Toyota Tacoma, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2021 Toyota RAV4, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2021 Toyota Tundra, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2019-2020 Subaru Forester, front\u003c\/li\u003e\n\u003cli\u003eFits 2019-2020 Toyota RAV4, front\u003c\/li\u003e\n\u003cli\u003eFits 2016-2019 Mitsubishi Mirage, front\u003c\/li\u003e\n\u003cli\u003eFits 2014-2020 Toyota 4Runner, front\u003c\/li\u003e\n\u003cli\u003eFits 2014-2020 Toyota Tundra, front\u003c\/li\u003e\n\u003cli\u003eFits 2014-2019 Toyota Highlander, front\u003c\/li\u003e\n\u003cli\u003eFits 2013-2019 Toyota Tacoma, front\u003c\/li\u003e\n\u003cli\u003eFits 2015-2018 Subaru WRX, front\u003c\/li\u003e\n\u003cli\u003eFits 2015-2018 Subaru WRX STI, front\u003c\/li\u003e\n\u003cli\u003eFits 2014-2018 Subaru Forester, front\u003c\/li\u003e\n\u003cli\u003eFits 2014-2018 Subaru Legacy, front\u003c\/li\u003e\n\u003cli\u003eFits 2014-2018 Subaru Outback, front\u003c\/li\u003e\n\u003cli\u003eFits 2014-2018 Toyota Yaris, front\u003c\/li\u003e\n\u003cli\u003eFits 2014-2017 Lexus CT200h, front\u003c\/li\u003e\n\u003cli\u003eFits 2013-2015 Lexus ES300h, front\u003c\/li\u003e\n\u003cli\u003eFits 2013-2015 Lexus ES350, front\u003c\/li\u003e\n\u003cli\u003eFits 2009-2014 Ferrari California, rear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard lighting is built around OE-quality specifications and DOT-approved construction for dependable replacement use. The H16C1 fog light bulb uses halogen technology, clear glass, and a factory-style base to support consistent fitment across the listed vehicle applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572010090677,"sku":"BCGL-H16C1","price":24.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H16C1_Fro_99c4c7a3-4177-4ff4-9eb8-57a6ca9cdc3c.jpg?v=1774971674"},{"product_id":"phillips-h2c1-fog-light-bulb","title":"Phillips H2C1 Fog Light Bulb - Front","description":"\u003ch2\u003ePhillips H2C1 Fog Light Bulb Overview\u003c\/h2\u003e\u003cp\u003eThe Phillips H2C1 is a 12-volt halogen fog lamp bulb built to OE-style standards for exterior lighting replacement. It uses a clear glass bulb with a single filament and 55-watt output, making it a practical choice for restoring forward fog light performance on select Lincoln, Ford, Jaguar, and Mercury applications.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Multiple Commercial Pack is the brand line behind this bulb, offering original-equipment quality in a value-focused format for everyday service work and fleet maintenance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number H2C1 fog light bulb for exterior lighting service\u003c\/li\u003e\n\u003cli\u003e12V halogen bulb with 55W output and 4.583A amperage rating\u003c\/li\u003e\n\u003cli\u003eClear glass construction with clear finish\u003c\/li\u003e\n\u003cli\u003eSingle filament design with C-8 filament type\u003c\/li\u003e\n\u003cli\u003eX511 bulb base type for the specified fog lamp application\u003c\/li\u003e\n\u003cli\u003eDOT approved for road-use compliance where required\u003c\/li\u003e\n\u003cli\u003eOE-quality replacement from Phillips Standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePhillips H2C1 is a halogen fog lamp bulb engineered for direct replacement in vehicles that use the X511 base and 55-watt fog light specification. The bulb’s clear glass body, 12-volt electrical rating, and single-filament design support consistent forward lighting performance in low-visibility conditions. This part number is listed for front fog light applications on vehicles including 1993-1994 Ford Explorer, 1990-1992 Lincoln Mark VII, 1993-1998 Lincoln Mark VIII, and select Jaguar and Mercury models such as XJS, XJ6, XJ12, Vanden Plas, Capri, and XJRS.\u003c\/p\u003e\u003cp\u003eAs part of the Phillips Standard range, H2C1 is positioned as an OE-quality replacement for drivers and technicians who want a straightforward fog light bulb service part. If you are searching for a Phillips H2C1 fog light bulb for a 1993-1994 Ford Explorer front fog lamp or a 1990-1992 Lincoln Mark VII front application, this bulb matches the listed fitment and electrical specifications.\u003c\/p\u003e\u003cp\u003eThis part cross-references no additional part numbers in the provided data.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Bulb Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or weakened fog light output\u003c\/li\u003e\n\u003cli\u003eBurned-out front fog lamp bulb\u003c\/li\u003e\n\u003cli\u003eUneven lighting between left and right fog lamps\u003c\/li\u003e\n\u003cli\u003eFailed bulb inspection due to exterior lighting outage\u003c\/li\u003e\n\u003cli\u003eRestoration of factory-style fog light function on listed vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s fog lamp socket, base type, and voltage requirements before installation. Match the bulb to the listed front application and avoid touching the glass with bare hands during handling. After installation, confirm proper beam operation and check both fog lamps for consistent illumination.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard fog light bulbs are built to provide the same original equipment quality associated with the brand’s automotive lighting supplied to automakers worldwide. This H2C1 bulb is DOT approved and manufactured as a halogen replacement for the specified exterior lighting applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572013957301,"sku":"BCGL-H2C1","price":15.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H2C1_Fro.jpg?v=1774971674"},{"product_id":"phillips-h3b1-fog-light-bulb","title":"Phillips H3B1 Fog Light Bulb","description":"\u003ch2\u003eOE-Style Fog Light Bulb for Clear Road Lighting\u003c\/h2\u003e\u003cp\u003eThe Phillips H3B1 fog light bulb is a 12V halogen replacement built to deliver original equipment quality for exterior lighting applications. With a clear glass bulb, PK22s base, and 55W output, it is a direct-fit choice for drivers replacing a worn fog lamp bulb on a wide range of vehicles.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Blister Pack is the brand’s OE-quality replacement line, offering dependable lighting performance and straightforward application coverage for everyday repairs. The H3B1 part number is used across many fog light and front lighting applications, including select BMW, Volkswagen, Chevrolet, Subaru, and Mercedes-Benz models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12V halogen fog light bulb with 55W output\u003c\/li\u003e\n\u003cli\u003eClear glass bulb with clear finish for consistent light output\u003c\/li\u003e\n\u003cli\u003ePK22s base for proper bulb seating\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use where specified by the vehicle application\u003c\/li\u003e\n\u003cli\u003eSingle-filament C-6 design\u003c\/li\u003e\n\u003cli\u003eOE-quality replacement from Phillips Standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eBuilt as a standard halogen fog lamp bulb, the Phillips H3B1 is designed for drivers who want a factory-style replacement without changing the lighting system. The bulb measures 1.65 inches in length and 0.49 inches in diameter, uses a glass bulb material, and operates at 4.58 amps. Its clear construction and standard fog lamp design make it a practical replacement for front fog lights and other listed exterior lighting positions.\u003c\/p\u003e\u003cp\u003eThis part cross-references BP1255H3 for the same application. If you are searching for a fog light bulb for BMW 328i, Volkswagen Golf, or Chevrolet Aveo front lighting service, H3B1 is a relevant OE-style reference to verify against your original bulb.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Bulb Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or burned-out fog light output\u003c\/li\u003e\n\u003cli\u003eUneven front lighting caused by an aging halogen bulb\u003c\/li\u003e\n\u003cli\u003eFailed inspection due to exterior lamp malfunction\u003c\/li\u003e\n\u003cli\u003eReduced visibility in fog, rain, or low-light driving\u003c\/li\u003e\n\u003cli\u003eReplacement needs for vehicles using an H3-style PK22s fog lamp bulb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment Tips\u003c\/h2\u003e\u003cp\u003eConfirm the original bulb base, wattage, and connector style before installation. This H3B1 bulb is listed across many applications, including Fits 2009-2013 BMW 328i, N\/A; Fits 2007-2009 Chevrolet Aveo, Front; Fits 2007-2010 Volkswagen Golf City, Front; Fits 2017-2018 Mercedes-Benz E400, Front; and Fits 2008-2014 Subaru Tribeca, Front. Additional coverage includes select Ford F-250 Super Duty, low beam listings and other front fog lamp applications, so matching the vehicle’s original bulb specification is important.\u003c\/p\u003e\u003cp\u003eHandle the glass bulb carefully and avoid touching the glass surface with bare hands during installation. Verify alignment after replacement so the fog lamp projects correctly and the beam pattern remains consistent with the vehicle’s lighting system.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard bulbs are positioned as OE-quality replacements, reflecting the same level of lighting performance used in automaker supply programs. The H3B1 is DOT approved where applicable and built for standard halogen fog light service.\u003c\/p\u003e\u003cp\u003eCompatible vehicle search terms include BMW 328i fog light bulb, Chevrolet Aveo front fog lamp bulb, and Volkswagen Golf City halogen bulb replacement.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572014416053,"sku":"BCGL-H3B1","price":9.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H3B1_Fro_0481f6b6-8ed1-4923-9ce5-6e3a01c82969.jpg?v=1774971675"},{"product_id":"phillips-h3cvb2-fog-light-bulb","title":"Phillips H3CVB2 Fog Light Bulb","description":"\u003ch2\u003eBright White Halogen Fog Light Output\u003c\/h2\u003e\u003cp\u003ePhillips CrystalVision Ultra fog light bulb H3CVB2 is built for drivers who want a cleaner white look without moving away from halogen lighting. The blue-coated glass helps produce a brighter white appearance on the road while keeping DOT-approved compliance for street use.\u003c\/p\u003e\u003cp\u003eWith a 12V, 55W halogen design and PK22s base, this CrystalVision Ultra - Twin Blister Pack bulb is a direct lighting upgrade for a wide range of vehicles, including BMW 3 Series, Jeep Wrangler, and Volkswagen Golf applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlue-coated glass for a bright white road appearance\u003c\/li\u003e\n\u003cli\u003eHalogen bulb technology with clear finish\u003c\/li\u003e\n\u003cli\u003e12V, 55W electrical rating\u003c\/li\u003e\n\u003cli\u003ePK22s base type with single-filament design\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eGlass bulb construction\u003c\/li\u003e\n\u003cli\u003ePhillips part number H3CVB2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCrystalVision Ultra Product Line\u003c\/h2\u003e\u003cp\u003eThe Phillips CrystalVision Ultra line is aimed at drivers who want a more modern lighting appearance from a halogen bulb. It uses a blue coating on the glass to shift the look of the beam toward a whiter color, making it a practical choice for exterior lighting upgrades where style and safety both matter.\u003c\/p\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePhillips H3CVB2 is a CrystalVision Ultra fog light bulb designed for exterior lighting applications that call for an H3-style halogen bulb with a PK22s base. The bulb’s blue-coated glass and clear finish are engineered to deliver a whiter light appearance on the road, while the 55W halogen output maintains familiar lighting performance for drivers replacing an existing fog lamp bulb. This part cross-references BPH3 and H355CVSU2 for the same application.\u003c\/p\u003e\u003cp\u003eFitment coverage spans 1994-2020 model years across many makes and models, including BMW 325i, BMW 328i, BMW X5, Jeep Wrangler, Subaru Legacy, Volkswagen Jetta, and Ford F-250 Super Duty applications. For fitment-specific searches, this part is commonly referenced as a fog light bulb for 2006-2011 BMW 328i, front; 1997-2006 Jeep Wrangler, front; and 1995-2007 Volkswagen Golf, front.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Bulb Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aged fog light output from a worn halogen bulb\u003c\/li\u003e\n\u003cli\u003eYellowed lighting appearance compared with a whiter bulb finish\u003c\/li\u003e\n\u003cli\u003eFailed exterior fog lamp bulb on supported vehicles\u003c\/li\u003e\n\u003cli\u003eNeed for a DOT-approved replacement bulb with the correct PK22s base\u003c\/li\u003e\n\u003cli\u003eRestoring forward visibility in fog, rain, and low-light driving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the bulb base type, voltage, wattage, and lamp position before installation. This bulb is listed for Low Beam, Front, and N\/A positions depending on vehicle application, so match the exact fitment row for your year, make, and model. Handle the glass carefully during installation and avoid touching the bulb surface with bare fingers.\u003c\/p\u003e\u003cp\u003eFor fitment-based searches, verify the exact application for your vehicle before ordering. Examples include Fits 2009-2013 BMW 328i, N\/A; Fits 1997-2006 Jeep Wrangler, Front; and Fits 2005-2007 Volkswagen Golf, Front.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips manufactures CrystalVision Ultra bulbs to meet DOT approval requirements for road use. The H3CVB2 is built as a halogen replacement bulb with defined electrical specifications and a glass construction suited to exterior lighting service.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572014710965,"sku":"BCGL-H3CVB2","price":31.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H3CVB2_Fro_d9622974-3d92-44ba-b305-8ad6bd030293.jpg?v=1774971675"},{"product_id":"phillips-h3cvps2-fog-light-bulb","title":"Phillips H3CVPS2 Fog Light Bulb","description":"\u003ch2\u003ePhillips CrystalVision Platinum Fog Light Bulb\u003c\/h2\u003e\u003cp\u003ePhillips CrystalVision Platinum H3CVPS2 is a halogen fog light bulb built for drivers who want a cleaner white appearance without giving up practical road visibility. With a 12V, 55W design and DOT approval, it delivers a crisp upgrade for select vehicles that use the PK22s base.\u003c\/p\u003e\u003cp\u003eThe CrystalVision Platinum - Twin Special Pack line focuses on a sharper, more modern lighting color. Philips uses an ultra-white gradient coating to produce light output up to 4000K, giving compatible vehicles a whiter look at the front end while maintaining the performance expected from a standard halogen fog lamp.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen fog light bulb with PK22s base\u003c\/li\u003e\n\u003cli\u003e12V, 55W electrical specification\u003c\/li\u003e\n\u003cli\u003eClear glass bulb with clear finish\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eUltra-white coating for up to 4000K light color\u003c\/li\u003e\n\u003cli\u003eDesigned to deliver up to 60% more vision than a standard halogen bulb\u003c\/li\u003e\n\u003cli\u003eSingle-filament C-6 construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003ePhillips H3CVPS2 is intended for drivers searching for a fog light bulb upgrade that improves the look of the vehicle lighting system while preserving everyday usability. It is a strong match for fitment-based searches such as 2006 Volkswagen Golf fog light bulb, 2004-2006 Volvo S60 front fog bulb, or 2003-2005 Honda Pilot front lighting replacement. This part also appears in applications for BMW 745i, BMW X5, Chevrolet Tahoe, Jeep Wrangler, and Subaru Legacy, depending on year and position.\u003c\/p\u003e\u003cp\u003eThe CrystalVision Platinum finish creates a whiter beam pattern than conventional halogen fog lamps, which can help improve contrast and front-end styling on select applications. Part number H3CVPS2 is also a useful reference when searching for a direct replacement for vehicles that specify the H3\/PK22s fog lamp format.\u003c\/p\u003e\u003ch2\u003eWhat This Bulb Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aged fog light output on halogen-equipped vehicles\u003c\/li\u003e\n\u003cli\u003eYellow-looking front lighting that does not match newer headlamps\u003c\/li\u003e\n\u003cli\u003eReplacement needs for a failed front fog lamp bulb\u003c\/li\u003e\n\u003cli\u003eDrivers seeking a whiter fog light appearance on compatible vehicles\u003c\/li\u003e\n\u003cli\u003eVisibility concerns in low-light, rain, or fog conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2006 Volkswagen Golf, front fog light position.\u003c\/li\u003e\n\u003cli\u003eFits 2004-2006 Volvo S60, front fog light position.\u003c\/li\u003e\n\u003cli\u003eFits 2003-2005 Honda Pilot, front fog light position.\u003c\/li\u003e\n\u003cli\u003eFits 1997-2006 Jeep Wrangler, front fog light position.\u003c\/li\u003e\n\u003cli\u003eFits 2000-2001 BMW X5, front fog light position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the bulb base type, voltage, and lamp position before installation. This bulb is listed for multiple front, low beam, and N\/A applications across select makes and models, so matching the original bulb specification is important. For vehicles with halogen capsule or HID headlamp notes in the fitment data, verify the exact lamp location before ordering. H3CVPS2 is commonly searched alongside CrystalVision Platinum fog bulb replacement terms for BMW, Volkswagen, Subaru, and Chevrolet applications.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips is known for OE-focused automotive lighting engineering, and this CrystalVision Platinum bulb is DOT approved. The product is built with glass bulb construction and halogen technology for consistent fitment in approved applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572016578741,"sku":"BCGL-H3CVPS2","price":33.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H3CVPS2_Fro_e91a555b-0671-4f35-ad2b-ed4520cfcbaa.jpg?v=1774971675"},{"product_id":"phillips-h3c1-fog-light-bulb","title":"Phillips H3C1 Fog Light Bulb","description":"\u003ch2\u003ePhillips H3C1 Fog Light Bulb Overview\u003c\/h2\u003e\u003cp\u003eThe Phillips H3C1 is a 12V, 55W fog light bulb built for specific-fit applications that call for a clear, push-type bulb with a single filament and 2-contact base. It is part of the Phillips Standard - Single Commercial Pack line, which is positioned as an OE-quality replacement option for drivers who want factory-style lighting performance.\u003c\/p\u003e\u003cp\u003eUse the H3C1 when you need a direct replacement fog light bulb for vehicles such as the BMW 328i, Volkswagen Jetta, and Subaru Legacy. The part number H3C1 is also referenced in OE-style replacement searches for a wide range of front lighting and low beam applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e12V fog light bulb with 55W output\u003c\/li\u003e\n\u003cli\u003eClear bulb color for standard exterior lighting use\u003c\/li\u003e\n\u003cli\u003eSingle filament design for focused light output\u003c\/li\u003e\n\u003cli\u003ePush-type base with 2 contacts\u003c\/li\u003e\n\u003cli\u003eSpecific-fit construction for confirmed vehicle applications\u003c\/li\u003e\n\u003cli\u003ePhillips Standard line focused on OE-quality replacement value\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details\u003c\/h2\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack is the brand’s OE-style replacement line for everyday service work. Phillips describes this range as delivering the same original equipment quality used by automakers, making it a practical choice for restoring factory lighting performance without changing the vehicle’s original bulb specification.\u003c\/p\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Phillips H3C1 fog light bulb is engineered for vehicles that require a 12-volt, 55-watt bulb with a clear lens and push-type connection. Its specific-fit design supports accurate placement in confirmed applications, including front fog light and low beam positions listed across many import and domestic models. Fitment coverage includes 1994-2020 vehicles, with applications for BMW, Chevrolet, Ford, Subaru, Volkswagen, Mercedes-Benz, and others.\u003c\/p\u003e\u003cp\u003eThis part cross-references 27331 for the same application. For buyers searching by vehicle, the H3C1 is a common replacement choice for BMW 750i xDrive, Chevrolet Aveo, and Volkswagen Golf City lighting service.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Bulb Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or failed fog light output\u003c\/li\u003e\n\u003cli\u003eBurned-out exterior bulb in a confirmed H3C1 application\u003c\/li\u003e\n\u003cli\u003eUneven forward lighting from an aging bulb\u003c\/li\u003e\n\u003cli\u003eNeed for an OE-style replacement bulb during routine maintenance\u003c\/li\u003e\n\u003cli\u003eRestoration of front fog light or low beam function on listed vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify the vehicle year, make, model, and position before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm the bulb base style, voltage, and wattage match the original specification.\u003c\/li\u003e\n\u003cli\u003eHandle the bulb carefully during installation to avoid contamination or damage.\u003c\/li\u003e\n\u003cli\u003eCheck the headlamp or fog lamp housing for corrosion, heat damage, or worn connectors before installing the replacement bulb.\u003c\/li\u003e\n\u003cli\u003eUse the fitment notes for vehicles with HID headlights, halogen capsule headlights, or other configuration-specific requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips positions the Standard range as an OE-quality lighting solution with factory-style value for replacement service. The H3C1 is built to match the original bulb specification used in confirmed applications, supporting consistent fitment and dependable exterior lighting performance.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572018446517,"sku":"BCGL-H3C1","price":9.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H3C1_Fro_21349242-f5e3-4ccf-9f1b-cf7f1e3dc3b2.jpg?v=1774971676"},{"product_id":"phillips-h3prb1-fog-light-bulb","title":"Phillips H3PRB1 Fog Light Bulb","description":"\u003ch2\u003ePhillips H3PRB1 Fog Light Bulb Overview\u003c\/h2\u003e\u003cp\u003eThe Phillips Vision H3PRB1 is a 12-volt halogen fog light bulb built for clear forward lighting and dependable road use. With up to 30% more vision than standard minimum legal requirements in low beam test results, it supports improved visibility in poor weather and low-light driving.\u003c\/p\u003e\u003cp\u003ePart number H3PRB1 is a DOT approved, clear glass bulb with a PK22s base, making it a direct replacement choice for many vehicles that use an H3 halogen fog lamp application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen fog light bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003e12V, 55W output for standard fog lamp applications\u003c\/li\u003e\n\u003cli\u003ePK22s bulb base for proper fitment in supported housings\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eSingle-filament C-6 design for consistent light output\u003c\/li\u003e\n\u003cli\u003ePhillips Vision line focuses on longer light-beam projection for added visibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details\u003c\/h2\u003e\u003cp\u003ePhillips Vision is the brand line used for lighting products engineered to deliver more usable road illumination than basic legal-minimum bulbs. This H3PRB1 fog light bulb is part of that line and is aimed at drivers who want a straightforward halogen replacement with improved beam reach in the same style of OE-fit lighting.\u003c\/p\u003e\u003ch2\u003eFitment and Application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2017-2018 Mercedes-Benz E400, front.\u003c\/li\u003e\n\u003cli\u003eFits 2014-2017 Volkswagen Caddy, front.\u003c\/li\u003e\n\u003cli\u003eFits 2009-2016 Chevrolet Aveo, front.\u003c\/li\u003e\n\u003cli\u003eFits 2008-2014 Subaru Tribeca, front.\u003c\/li\u003e\n\u003cli\u003eFits 2007-2008 Honda Element, front.\u003c\/li\u003e\n\u003cli\u003eFits 2004-2006 Volvo S60, front.\u003c\/li\u003e\n\u003cli\u003eFits 2003-2005 Honda Pilot, front.\u003c\/li\u003e\n\u003cli\u003eFits 2000-2006 Jeep Wrangler, front.\u003c\/li\u003e\n\u003cli\u003eFits 1998-2005 Volkswagen Cabrio, front.\u003c\/li\u003e\n\u003cli\u003eFits 1995-2004 Audi A6, front.\u003c\/li\u003e\n\u003cli\u003eFits 1994-1998 Ford Explorer, front.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat This Bulb Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or worn fog light output\u003c\/li\u003e\n\u003cli\u003eReduced visibility in rain, fog, or snow\u003c\/li\u003e\n\u003cli\u003eFailed exterior lighting inspection points\u003c\/li\u003e\n\u003cli\u003eRestoring proper beam pattern in a halogen fog lamp housing\u003c\/li\u003e\n\u003cli\u003eReplacing an aging H3 bulb with a DOT approved option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle uses an H3 bulb with a PK22s base before installation. Match the bulb to the correct fog light housing position listed in the fitment data, and handle the glass with care to avoid contamination or premature failure. For vehicles such as BMW 640i, 650i, M6, and related applications listed with HID headlights, verify the specific fog or auxiliary lamp requirement before ordering.\u003c\/p\u003e\u003cp\u003ePart number H3PRB1 also cross-references H3XV for the same application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Vision bulbs are built to meet DOT approval requirements and are designed for consistent halogen lighting performance in supported applications. The H3PRB1 is engineered as a road-legal replacement bulb for drivers who need dependable exterior lighting on vehicles including Ford F-250 Super Duty, Chevrolet Aveo, and Mercedes-Benz E400 applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572021592245,"sku":"BCGL-H3PRB1","price":10.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H3PRB1_Fro.jpg?v=1774971676"},{"product_id":"phillips-h3vpb1-fog-light-bulb","title":"Phillips H3VPB1 Fog Light Bulb","description":"\u003ch2\u003ePhillips VisionPlus H3 Fog Light Bulb\u003c\/h2\u003e\u003cp\u003ePhillips VisionPlus H3 fog light bulb delivers a clearer forward view for drivers who want more usable light from a halogen replacement. With a 12V, 55W output and DOT approval, this H3VPB1 bulb is built for direct-fit exterior lighting applications across a wide range of vehicles.\u003c\/p\u003e\u003cp\u003eThe VisionPlus - Single Blister Pack line focuses on improved road visibility in low-beam and fog-light use cases. For drivers searching for an H3 fog light bulb for BMW 3 Series, Volkswagen Golf, or Subaru Tribeca applications, this Philips VisionPlus bulb provides a straightforward OE-style lighting upgrade.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePhilips VisionPlus halogen fog light bulb\u003c\/li\u003e\n\u003cli\u003ePart number: H3VPB1\u003c\/li\u003e\n\u003cli\u003e12V, 55W electrical rating\u003c\/li\u003e\n\u003cli\u003ePK22s bulb base with C-6 filament\u003c\/li\u003e\n\u003cli\u003eClear glass bulb with clear finish\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003eDesigned to produce up to 60% more vision versus standard minimum legal requirements in low-beam test results\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis Philips H3 fog light bulb is a halogen VisionPlus bulb with a clear glass construction, 0.49-inch diameter, and 1.65-inch length. The PK22s base supports precise fitment in vehicles specified for H3 lighting, while the 4.58333333333333 amp rating aligns with standard 12-volt exterior lighting circuits. The H3VPB1 part number is commonly searched by drivers replacing fog lamps or low-beam bulbs in select BMW, Chevrolet, Volkswagen, Subaru, Audi, and Mercedes-Benz models.\u003c\/p\u003e\u003cp\u003eCompatible With 1994-2020 vehicle applications listed in the fitment data, including 2020 Ford F-250 Super Duty low beam, 2017-2018 Mercedes-Benz E400 front fog light, 2008-2014 Subaru Tribeca front, and 2007-2010 Volkswagen Golf City front. This part cross-references no alternate part numbers in the provided data.\u003c\/p\u003e\u003ch2\u003eCommon Issues It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aged fog light output\u003c\/li\u003e\n\u003cli\u003eReduced visibility in rain, fog, or low-light driving\u003c\/li\u003e\n\u003cli\u003eBurned-out H3 halogen bulb replacement needs\u003c\/li\u003e\n\u003cli\u003eUneven or weak forward lighting from a worn bulb\u003c\/li\u003e\n\u003cli\u003eNeed for a DOT-approved exterior lighting replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the bulb base type is PK22s and confirm the vehicle uses an H3 halogen fog light or low-beam application before installation. Match the position shown in the fitment data, since this bulb is listed for front, low beam, and N\/A applications depending on the vehicle. Handle the glass bulb carefully and avoid touching the glass surface with bare fingers.\u003c\/p\u003e\u003cp\u003eFor vehicles such as BMW 640i, 650i, M6, and related models listed with HID headlights, confirm the exact lighting configuration before ordering. The same applies to fitment-specific notes on models like Porsche Cayenne, Volkswagen Jetta, and Nissan Maxima where production dates or headlamp type affect application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips VisionPlus is a recognized halogen bulb line engineered for road-legal exterior lighting use, and this bulb is DOT approved. The manufacturer states that VisionPlus bulbs are designed to increase usable vision compared with standard minimum legal requirements in low-beam testing.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572022902965,"sku":"BCGL-H3VPB1","price":15.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H3VPB1_Fro_86047810-37ef-43b3-9182-4e347b0eea33.jpg?v=1774971676"},{"product_id":"phillips-h4351c1-headlight-bulb","title":"Phillips H4351C1 Headlight Bulb - High Beam or Low Beam","description":"\u003ch2\u003ePhillips H4351C1 Headlight Bulb Overview\u003c\/h2\u003e\u003cp\u003eThe Phillips H4351C1 is a standard sealed beam headlight bulb built for dependable exterior lighting performance. It uses halogen technology with a clear glass bulb and is DOT approved and street legal for road use.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack is the brand line for value-focused lighting applications, offering a straightforward replacement option for drivers who need a sealed beam headlight bulb that matches common OE-style requirements.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHalogen headlight bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003eStandard sealed beam design with 2 contact lugs base type\u003c\/li\u003e\n\u003cli\u003eHigh beam and low beam beam type support\u003c\/li\u003e\n\u003cli\u003e12.8V, 55W electrical rating\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eSingle filament design with C-2R filament type\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1993-1997 Chevrolet Camaro, low beam\u003c\/li\u003e\n\u003cli\u003eFits 1992-1997 Oldsmobile Cutlass Supreme, low beam\u003c\/li\u003e\n\u003cli\u003eFits 1991-1996 Pontiac Grand Prix, high beam; compatible with vehicles with sealed beam headlamps\u003c\/li\u003e\n\u003cli\u003eFits 1992-1993 Geo Storm, low beam\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis part cross-references Gates (e.g., 22386) for the same application. The Phillips H4351C1 is a direct lighting replacement for drivers searching for a 1993-1997 Chevrolet Camaro low beam headlight bulb, a 1992-1997 Oldsmobile Cutlass Supreme low beam bulb, or a 1991-1996 Pontiac Grand Prix high beam sealed beam lamp.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aging sealed beam headlight output\u003c\/li\u003e\n\u003cli\u003eCracked or worn exterior headlight lens assemblies that require bulb replacement\u003c\/li\u003e\n\u003cli\u003eFailed low beam or high beam lighting on supported vehicles\u003c\/li\u003e\n\u003cli\u003eRoad-legal lighting replacement needs for inspected vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the sealed beam headlamp style, beam position, and electrical connector before installation. Confirm the bulb base type and voltage rating match the vehicle’s original lighting specification. For best results, handle the glass carefully and avoid touching the bulb surface with bare hands.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eThis Phillips headlight bulb is DOT approved and street legal, with a halogen sealed beam design intended to meet standard exterior lighting requirements for the listed applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572025098421,"sku":"BCGL-H4351C1","price":37.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4351C1_Fro.jpg?v=1774971677"},{"product_id":"phillips-h4352c1-headlight-bulb","title":"Phillips H4352C1 Headlight Bulb - High Beam or Low Beam","description":"\u003ch2\u003ePhillips H4352C1 Halogen Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H4352C1 is a standard sealed beam halogen headlight bulb built for direct exterior lighting replacement in vehicles that use a 12.8-volt sealed beam setup. It is DOT approved, street legal, and uses a clear glass bulb with a single filament for high beam and low beam applications where specified.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen bulb technology for sealed beam headlight applications\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal for road use\u003c\/li\u003e\n\u003cli\u003eClear glass bulb with clear finish\u003c\/li\u003e\n\u003cli\u003eSingle filament design with C-2R filament type\u003c\/li\u003e\n\u003cli\u003e12.8-volt, 65-watt electrical rating\u003c\/li\u003e\n\u003cli\u003eBulb base type: 2 contact lugs\u003c\/li\u003e\n\u003cli\u003ePhillips Standard - Single Commercial Pack product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhillips H4352C1 is part of the Standard - Single Commercial Pack line, a value-focused range for everyday lighting replacement needs. This sealed beam headlight bulb measures 3.4 inches in length and uses halogen technology with a glass bulb construction for exterior lighting service. The design supports high beam and low beam use where the vehicle calls for this sealed beam configuration. This part cross-references Gates 22387 for the same application.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1993-1997 Chevrolet Camaro, High Beam\u003c\/li\u003e\n\u003cli\u003eFits 1992-1997 Oldsmobile Cutlass Supreme, High Beam\u003c\/li\u003e\n\u003cli\u003eFits 1991-1996 Pontiac Grand Prix, Low Beam; compatible with vehicles with sealed beam headlamps\u003c\/li\u003e\n\u003cli\u003eFits 1992-1993 Geo Storm, High Beam\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Replacement Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores forward lighting when a sealed beam headlight is dim or burned out\u003c\/li\u003e\n\u003cli\u003eReplaces a damaged halogen headlight bulb in sealed beam applications\u003c\/li\u003e\n\u003cli\u003eAddresses reduced nighttime visibility from aging exterior lighting\u003c\/li\u003e\n\u003cli\u003eCorrects road-legal lighting issues caused by a failed headlamp\u003c\/li\u003e\n\u003cli\u003eSupports replacement on Chevrolet Camaro, Oldsmobile Cutlass Supreme, Pontiac Grand Prix, and Geo Storm applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses a sealed beam headlamp and confirm the beam position before installation. Match the bulb base type, voltage, and wattage to the original specification for proper operation. Handle the glass surface carefully during installation to avoid contamination or damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard lighting products are built as practical replacement parts for common automotive lighting service. The H4352C1 is DOT approved and street legal, supporting compliant use on the listed Chevrolet Camaro, Oldsmobile Cutlass Supreme, Pontiac Grand Prix, and Geo Storm fitments.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572025917621,"sku":"BCGL-H4352C1","price":37.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4352C1_Fro.jpg?v=1774971677"},{"product_id":"phillips-h4651c1-headlight-bulb","title":"Phillips H4651C1 Headlight Bulb - High Beam or Lower","description":"\u003ch2\u003ePhillips H4651C1 Headlight Bulb Overview\u003c\/h2\u003e\u003cp\u003eThe Phillips H4651C1 is a standard sealed beam halogen headlight bulb built for high beam use in a wide range of classic cars, trucks, and vans. It is DOT approved, street legal, and uses clear glass construction for dependable exterior lighting performance.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack focuses on practical value for everyday replacement needs. For drivers servicing older Chevrolet P30, Camaro, or Ford LTD Crown Victoria applications, this sealed beam headlight offers a direct lighting solution with the correct beam pattern and electrical specs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen headlight bulb with standard sealed beam construction\u003c\/li\u003e\n\u003cli\u003eHigh beam application with clear bulb finish\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eGlass bulb material with C-2R filament type\u003c\/li\u003e\n\u003cli\u003e12.8-volt operation, 50-watt output, 3.91-amp rating\u003c\/li\u003e\n\u003cli\u003eBulb base type: 2 contact lugs\u003c\/li\u003e\n\u003cli\u003ePhillips part number H4651C1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis Phillips H4651C1 headlight bulb is part of the Standard - Single Commercial Pack line, a value-oriented range for routine lighting replacement. It is a halogen sealed beam unit with one filament and a clear beam output, making it a straightforward choice for vehicles that use sealed beam headlamps. The design supports high beam service across many older domestic and import applications, including Chevrolet Camaro, Chevrolet P30, and Ford LTD Crown Victoria fitments.\u003c\/p\u003e\u003cp\u003eThis part cross-references Gates 18517 for the same application. The H4651C1 is also listed under interchange reference 18532.\u003c\/p\u003e\u003ch2\u003eCommon Problems It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or failed high beam headlight output\u003c\/li\u003e\n\u003cli\u003eCracked or aged sealed beam headlamp replacement needs\u003c\/li\u003e\n\u003cli\u003eLoss of road visibility during night driving\u003c\/li\u003e\n\u003cli\u003eNon-functioning street-legal exterior lighting on older vehicles\u003c\/li\u003e\n\u003cli\u003eRestoration work on classic Chevrolet, Chrysler, Ford, and GMC models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses a standard sealed beam high beam application before ordering. Confirm the headlamp style, position, and connector layout match the vehicle listing, especially on four-headlight setups and models with sealed beam headlamps. The H4651C1 is listed for high beam and lower positions depending on application, so match the fitment notes carefully for Chevrolet P30, Camaro, and other supported vehicles.\u003c\/p\u003e\u003cp\u003eFor best results, inspect the headlamp housing, wiring connector, and lens condition before installation. Proper alignment after replacement helps maintain correct beam aim and road illumination.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips markets the Standard range as a practical value line for a wide range of applications. This H4651C1 headlight bulb is DOT approved and street legal, giving buyers a compliant lighting replacement for confirmed fitments across 1975-1999 vehicles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 1998-1999 Chevrolet P30, lower\u003c\/li\u003e\n\u003cli\u003eFits 1997 Chevrolet P30, lower\u003c\/li\u003e\n\u003cli\u003eFits 1995-1996 Chevrolet P30, lower\u003c\/li\u003e\n\u003cli\u003eFits 1982-1992 Chevrolet Camaro, high beam\u003c\/li\u003e\n\u003cli\u003eFits 1987-1991 Ford LTD Crown Victoria, high beam\u003c\/li\u003e\n\u003cli\u003eFits 1981-1989 Lincoln Town Car, high beam\u003c\/li\u003e\n\u003cli\u003eFits 1988-1990 Toyota Land Cruiser, high beam\u003c\/li\u003e\n\u003cli\u003eFits 1987-1989 Pontiac Grand Am, high beam\u003c\/li\u003e\n\u003cli\u003eFits 1987-1988 Chevrolet Monte Carlo, high beam\u003c\/li\u003e\n\u003cli\u003eFits 1975-1986 Cadillac DeVille, high beam\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572030275765,"sku":"BCGL-H4651C1","price":19.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4651C1_Fro.jpg?v=1774971678"},{"product_id":"phillips-h4656cvc1-headlight-bulb","title":"Phillips H4656CVC1 Headlight Bulb - High Beam and Low Beam, Low Beam, Lower or Upper","description":"\u003ch2\u003eBright white low beam lighting for classic vehicles\u003c\/h2\u003e\u003cp\u003eThe Philips CrystalVision Ultra headlight bulb delivers a bright white road beam for drivers who want a cleaner, more modern look without giving up street-legal performance. This halogen sealed beam option is DOT approved and built for low beam applications on a wide range of classic Chevrolet, Ford, GMC, Toyota, and other vintage vehicles.\u003c\/p\u003e\u003cp\u003ePart number H4656CVC1 is part of the CrystalVision Ultra - Single Commercial Pack line, a Philips lighting range focused on personalized appearance with practical nighttime visibility. If you are replacing an aging sealed beam unit on a Chevrolet Camaro, Ford LTD Crown Victoria, or Toyota Land Cruiser, this bulb offers a straightforward upgrade path for the correct low beam application.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen sealed beam headlight bulb with a clear finish and blue-coated bulb color\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal for approved low beam use\u003c\/li\u003e\n\u003cli\u003e12.8-volt operation with 35\/35 watt output\u003c\/li\u003e\n\u003cli\u003eGlass bulb construction with C-6 filament type\u003c\/li\u003e\n\u003cli\u003eDesigned for low beam positions on vehicles with sealed beam headlamps\u003c\/li\u003e\n\u003cli\u003ePhilips CrystalVision Ultra styling for a brighter white appearance on the road\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed product description\u003c\/h2\u003e\u003cp\u003ePhilips H4656CVC1 is a CrystalVision Sealed Beam halogen headlight bulb built for drivers who want a whiter headlight appearance while staying within legal lighting requirements. The blue-coated bulb and clear glass finish help produce a bright white light output that suits older vehicles where sealed beam headlamp replacement is required. This makes it a practical choice for restoration work, maintenance, or a lighting refresh on applications such as Chevrolet Camaro, Ford Mustang, and Buick Regal low beam setups.\u003c\/p\u003e\u003cp\u003eThis part cross-references Dorman - HELP 97695 for the same application. It also interchanges with 25098 and H4656BLN.\u003c\/p\u003e\u003ch2\u003eWhat this headlight bulb helps address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDull or yellowed low beam output on older sealed beam headlamps\u003c\/li\u003e\n\u003cli\u003eReduced nighttime road visibility from worn halogen lighting\u003c\/li\u003e\n\u003cli\u003eOutdated headlight appearance on classic cars and trucks\u003c\/li\u003e\n\u003cli\u003eNeed for a DOT approved, street legal low beam replacement\u003c\/li\u003e\n\u003cli\u003eReplacement of a failed sealed beam headlight on supported vintage applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes and fitment tips\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle uses an H4656-style sealed beam low beam application before ordering. Fits 1982-1992 Chevrolet Camaro, low beam; Fits 1987-1991 Ford LTD Crown Victoria, low beam; Fits 1988-1990 Toyota Land Cruiser, low beam; Fits 1981-1989 Lincoln Town Car, low beam; Fits 1976-1986 Oldsmobile 98, low beam. Additional fitment includes many Chevrolet, GMC, Buick, Cadillac, Chrysler, Dodge, Ford, Mercury, Nissan, Pontiac, Volvo, and Toyota models listed for low beam use, including vehicles with four-headlight or sealed-beam configurations where noted.\u003c\/p\u003e\u003cp\u003eUse the vehicle’s existing headlamp configuration and position notes to verify the correct application before installation. This part number H4656CVC1 is intended for low beam use only and should be matched to the exact headlamp style specified for the vehicle.\u003c\/p\u003e\u003ch2\u003eQuality assurance\u003c\/h2\u003e\u003cp\u003ePhilips is a recognized automotive lighting brand, and this CrystalVision Ultra bulb is DOT approved and street legal for the listed applications. The sealed beam design, halogen technology, and regulated voltage and wattage ratings support consistent lighting performance in approved low beam use.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572034666677,"sku":"BCGL-H4656CVC1","price":25.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4656CVC1_Fro.jpg?v=1774971679"},{"product_id":"phillips-h4656c1-headlight-bulb","title":"Phillips H4656C1 Headlight Bulb - High Beam and Low Beam, Low Beam, Lower or Upper","description":"\u003ch2\u003ePhillips H4656C1 Halogen Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H4656C1 is a standard sealed beam halogen headlight bulb built for low beam applications that call for clear, DOT approved, street legal lighting. It delivers a practical OE-style solution for older vehicles that use sealed beam headlamps, including Chevrolet Camaro, Ford LTD Crown Victoria, and Toyota Land Cruiser fitments.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen bulb technology with clear glass construction\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal for on-road use\u003c\/li\u003e\n\u003cli\u003eLow beam application for sealed beam headlamp systems\u003c\/li\u003e\n\u003cli\u003eStandard sealed beam design with 3 contact lug base\u003c\/li\u003e\n\u003cli\u003e12.8V operation with 35\/35W output\u003c\/li\u003e\n\u003cli\u003eFilament type C-6 with 2 filament configuration\u003c\/li\u003e\n\u003cli\u003ePhillips Standard - Single Commercial Pack product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack focuses on straightforward replacement lighting for everyday service needs. The H4656C1 part number identifies a standard range halogen headlight bulb that offers dependable value for vehicles requiring a sealed beam low beam setup. With clear bulb color, glass material, and a DOT approved design, this bulb is suited for drivers restoring or maintaining factory-style exterior lighting on a wide range of classic cars, trucks, and vans.\u003c\/p\u003e\u003cp\u003eThis part cross-references Davico Mfg 18533 for the same application. The Phillips H4656C1 is listed across numerous fitments, including 1982-1992 Chevrolet Camaro, 1979-1986 Ford LTD, and 1988-1990 Toyota Land Cruiser low beam applications.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a dim or failed low beam sealed beam headlight\u003c\/li\u003e\n\u003cli\u003eRestoring factory-style lighting on older Chevrolet, Ford, and Toyota vehicles\u003c\/li\u003e\n\u003cli\u003eAddressing uneven forward lighting from aging halogen headlamps\u003c\/li\u003e\n\u003cli\u003eUpdating worn exterior lighting on classic cars, vans, and light trucks\u003c\/li\u003e\n\u003cli\u003eMaintaining street-legal lighting performance for daily driving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the headlamp style, beam position, and connector\/base configuration before installation. This bulb is listed for low beam use and also appears in upper and lower positions on select Chevrolet P30 motor home forward control chassis applications. Confirm the vehicle uses a sealed beam headlamp setup and match the application notes for four-headlight or single-headlamp configurations where specified.\u003c\/p\u003e\u003cp\u003eFits 1982-1992 Chevrolet Camaro, low beam; fits 1979-1986 Ford LTD, low beam; fits 1988-1990 Toyota Land Cruiser, low beam. Additional fitments include Chevrolet P30, Chrysler LeBaron, Buick LeSabre, and Mercury Grand Marquis applications across the listed years.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips markets the Standard range as a value-focused lighting line for everyday replacement needs. The H4656C1 is DOT approved, street legal, and built with halogen sealed beam construction to support consistent on-road use.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572039286965,"sku":"BCGL-H4656C1","price":19.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4656C1_Fro_496a2302-fc83-4463-8e22-18f53a581ef4.jpg?v=1774971679"},{"product_id":"phillips-h4656led-headlight-bulb","title":"Phillips H4656LED Headlight Bulb - High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhilips LED Integral Beam Headlight Bulb\u003c\/h2\u003e\u003cp\u003eUpgrade low beam lighting with the Philips LED Integral Beam headlight bulb, part number H4656LED. This DOT approved LED headlight delivers white light, 12-36V operation, and a clear beam pattern for improved forward visibility on classic vehicles that use sealed beam or four-headlight setups.\u003c\/p\u003e\u003cp\u003eBuilt for a wide range of vintage and late-1980s applications, H4656LED is a direct-fit lighting solution for drivers restoring or modernizing vehicles such as the Chevrolet Camaro, Ford LTD Crown Victoria, and Toyota Land Cruiser. The Philips LED Integral Beam line focuses on replacing traditional low beam sealed beam units with LED technology in a format that matches the original headlamp style.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePhilips LED Integral Beam headlight bulb, part number H4656LED\u003c\/li\u003e\n\u003cli\u003eLED technology with white bulb color and clear finish\u003c\/li\u003e\n\u003cli\u003eDOT approved for road use\u003c\/li\u003e\n\u003cli\u003e12-36 volt operating range\u003c\/li\u003e\n\u003cli\u003e14 watt power rating and 1.16 amp current draw\u003c\/li\u003e\n\u003cli\u003eDesigned for low beam headlamp applications\u003c\/li\u003e\n\u003cli\u003ePlastic bulb construction with 3 contact lug base type\u003c\/li\u003e\n\u003cli\u003eCross-reference: H4656NVLEDN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Philips LED Integral Beam H4656LED is engineered for low beam headlight applications where a sealed beam-style replacement is needed. It is listed across a broad range of vehicles, including 1982-1992 Chevrolet Camaro, 1987-1991 Ford LTD Crown Victoria, 1988-1990 Toyota Land Cruiser, and many other classic cars, trucks, and vans. If you are searching for a Philips H4656LED headlight bulb for a Chevrolet Camaro, Ford LTD Crown Victoria, or Toyota Land Cruiser low beam, this part provides a modern LED lighting option in an integral beam format.\u003c\/p\u003e\u003cp\u003eAccording to Philips, this LED headlight can deliver up to 200% brighter light versus standard minimum legal low beam requirements in test results. That makes it a practical choice for drivers who want stronger road illumination while keeping the original headlamp configuration on vehicles such as the Buick LeSabre, Chevrolet Monte Carlo, and Lincoln Town Car.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim low beam output on aging sealed beam headlamps\u003c\/li\u003e\n\u003cli\u003eReduced nighttime visibility on classic vehicles\u003c\/li\u003e\n\u003cli\u003eYellowed or outdated headlight performance\u003c\/li\u003e\n\u003cli\u003eNeed for a DOT approved LED replacement in an integral beam format\u003c\/li\u003e\n\u003cli\u003eLow beam headlamp replacement for restored or daily-driven vintage vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the headlamp style, base type, and vehicle notes before ordering. Some listed applications require vehicles equipped with four headlights or sealed beam headlamps, so match the fitment details to your exact vehicle configuration. This part is for low beam use only and should be installed in accordance with the vehicle’s lighting setup and local regulations.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips backs the LED Integral Beam line with a focus on road-legal lighting performance and DOT approval. The H4656LED is built to meet the needs of drivers replacing original low beam sealed beam units with a modern LED solution.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572040237237,"sku":"BCGL-H4656LED","price":94.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4656LED_Fro_3087f6fe-cc10-41ad-b440-0934f47666eb.jpg?v=1774971679"},{"product_id":"phillips-h4656llc1-headlight-bulb","title":"Phillips H4656LLC1 Headlight Bulb - High Beam and Low Beam, Low Beam, Lower or Upper","description":"\u003ch2\u003eLong-Life Halogen Headlight for Classic Low Beam Applications\u003c\/h2\u003e\u003cp\u003ePhillips H4656LLC1 is a long life sealed beam halogen headlight bulb built for drivers who want dependable value and steady road illumination. It is DOT approved, street legal, and configured for low beam use in a wide range of classic Chevrolet, Ford, Chrysler, GMC, and Toyota applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen long life sealed beam construction for low beam service\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal for road use\u003c\/li\u003e\n\u003cli\u003eClear glass bulb with clear finish\u003c\/li\u003e\n\u003cli\u003e12.8-volt, 35\/35-watt electrical rating\u003c\/li\u003e\n\u003cli\u003eTwo-filament design with C-6 filament type\u003c\/li\u003e\n\u003cli\u003eBulb base type: 3 contact lugs\u003c\/li\u003e\n\u003cli\u003ePhillips LongerLife line focused on value and extended service life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details\u003c\/h2\u003e\u003cp\u003eThe Phillips LongerLife - Single Commercial Pack line is aimed at drivers who want a practical replacement headlight with a balance of service life and everyday performance. The H4656LLC1 follows that approach with a halogen sealed beam design that supports low beam operation in vehicles that use this style of headlamp.\u003c\/p\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Phillips H4656LLC1 headlight bulb is a direct-fit lighting solution for vehicles using an H4656-style low beam sealed beam setup. It is a clear halogen bulb with a glass body, designed for 12.8-volt systems and rated at 35\/35 watts. The dual-filament layout supports low beam operation, while the DOT approved, street legal construction helps keep the vehicle road-ready. This part cross-references Dixie Electric Ltd 14753 for the same application. Common search terms for this bulb include low beam sealed beam headlight for 1982-1992 Chevrolet Camaro, low beam headlight bulb for 1981-1989 Lincoln Town Car, and H4656 replacement bulb for classic GM and Ford vehicles. The part number H4656LLC1 is also useful when sourcing the correct sealed beam replacement for older cars and trucks with rectangular or sealed beam headlamp systems.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aging low beam output on older sealed beam headlamps\u003c\/li\u003e\n\u003cli\u003eFailed headlight bulb in a street-driven classic vehicle\u003c\/li\u003e\n\u003cli\u003eNeed for a DOT approved replacement for road use\u003c\/li\u003e\n\u003cli\u003eRestoring proper low beam function on vehicles with H4656-style lighting\u003c\/li\u003e\n\u003cli\u003eReplacing worn sealed beam units in Chevrolet, Ford, GMC, Chrysler, and Toyota applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment Tips\u003c\/h2\u003e\u003cp\u003eFits 1982-1992 Chevrolet Camaro, low beam. Fits 1977-1992 Chrysler LeBaron, low beam. Fits 1981-1989 Lincoln Town Car, low beam. Fits 1988-1991 Chevrolet G10, low beam, compatible with vehicles equipped with four headlights. Fits 1988-1991 GMC G1500, low beam, compatible with vehicles equipped with four headlights. Fits 1988-1990 Toyota Land Cruiser, low beam. Verify the existing bulb base, beam position, and sealed beam configuration before installation. The H4656LLC1 part number should be matched to the original headlamp specification, especially on vehicles with dual rectangular headlamps or four-headlight setups. For additional fitment confirmation, compare the original lamp markings with H4656LLC1 before replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips manufactures this LongerLife halogen headlight to meet DOT approval requirements and street-legal use standards. The H4656LLC1 is built with a glass bulb body, clear finish, and sealed beam construction for consistent fitment in supported applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572041318581,"sku":"BCGL-H4656LLC1","price":21.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4656LLC1_Fro_0602f034-69a9-416e-9328-20927253153c.jpg?v=1774971680"},{"product_id":"phillips-h4666cvc1-headlight-bulb","title":"Phillips H4666CVC1 Headlight Bulb - High Beam and Low Beam","description":"\u003ch2\u003eBright White Halogen Headlight Upgrade\u003c\/h2\u003e\u003cp\u003eThe Philips CrystalVision Ultra headlight bulb is built for drivers who want a cleaner white road beam without giving up street-legal lighting performance. This Philips CrystalVision Ultra - Single Commercial Pack bulb uses halogen technology with a blue-coated glass finish to deliver a more modern look for sealed beam headlamp applications.\u003c\/p\u003e\u003cp\u003eCompatible With vehicles such as the Chevrolet Blazer, Ford Probe, Geo Metro, Pontiac Firebird, and Toyota Tercel, this H4666CVC1 headlight bulb is a direct lighting solution for high beam and low beam use where the correct sealed beam configuration is required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen headlight bulb with CrystalVision sealed beam construction\u003c\/li\u003e\n\u003cli\u003eBright white light output for improved nighttime visibility\u003c\/li\u003e\n\u003cli\u003eBlue-coated bulb color with clear finish for a cleaner appearance\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eHigh beam and low beam beam type\u003c\/li\u003e\n\u003cli\u003e12.8-volt electrical rating with 65\/45 watt output\u003c\/li\u003e\n\u003cli\u003eGlass bulb material with C-6 filament type\u003c\/li\u003e\n\u003cli\u003eBulb base type: 3 contact lugs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhillips CrystalVision Ultra is part of a lighting line focused on drivers who want to personalize exterior lighting while maintaining road-use compliance. This sealed beam headlight bulb combines a white-forward beam pattern with halogen reliability, making it a practical choice for older vehicles that use sealed beam headlamps. The H4666CVC1 part number is commonly searched for replacement needs on applications such as the Chevrolet S10, GMC Jimmy, Pontiac Firebird, and Saturn SC2.\u003c\/p\u003e\u003cp\u003eThis part cross-references Philips 28157 and H6545BLN for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Bulb Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDull or aged sealed beam headlight output\u003c\/li\u003e\n\u003cli\u003eYellow-looking factory lighting on older vehicles\u003c\/li\u003e\n\u003cli\u003eReduced nighttime road visibility from worn bulbs\u003c\/li\u003e\n\u003cli\u003eNeed for a street-legal lighting replacement\u003c\/li\u003e\n\u003cli\u003eReplacement needs for high beam and low beam sealed beam headlamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment Tips\u003c\/h2\u003e\u003cp\u003eVerify the headlamp style before ordering, since this bulb is listed for vehicles with sealed beam headlamps in specific applications. Confirm the bulb base type, beam type, and voltage match the original equipment specification before installation. Fits 1995-1997 Chevrolet Blazer, high beam and low beam; fits 1994-1997 Chevrolet S10, high beam and low beam; fits 1993-1997 Ford Probe, high beam and low beam; fits 1989-1997 Geo Metro, high beam and low beam; fits 1995-1997 GMC Jimmy, high beam and low beam; fits 1994-1997 GMC Sonoma, high beam and low beam; fits 1991-1997 Pontiac Firebird, high beam and low beam; fits 1993-1996 Saturn SC2, high beam and low beam; fits 1988-1994 Toyota Tercel, high beam and low beam; fits 1984-1985 Honda Civic, high beam and low beam.\u003c\/p\u003e\u003cp\u003eAdditional fitment includes 1991-1995 Dodge Dakota, 1991-1994 Mercury Capri, 1991-1993 Dodge Stealth, 1991-1993 Mitsubishi 3000GT, 1991-1992 Dodge Caravan, 1991-1992 Saturn SC, 1987-1991 Chrysler Daytona, 1987-1991 Dodge Daytona, 1990-1991 Mitsubishi Eclipse, 1990-1991 Plymouth Laser, 1987-1990 Dodge Dakota, 1987-1988 Dodge Shadow, 1987-1988 Plymouth Sundance, 1989-1992 Chevrolet Sprint, 1992 Chevrolet Metro, and 1995-1997 Pontiac Firebird and Pontiac Firefly applications noted for sealed beam or fog light use where specified.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips lighting products are built to meet DOT approval requirements and street-legal use standards for the listed applications. The CrystalVision Ultra line is positioned for drivers seeking a brighter white appearance while maintaining halogen lighting performance and road compliance.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572042367157,"sku":"BCGL-H4666CVC1","price":26.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4666CVC1_Fro.jpg?v=1774971680"},{"product_id":"phillips-h4666c1-headlight-bulb","title":"Phillips H4666C1 Headlight Bulb - High Beam and Low Beam","description":"\u003ch2\u003ePhillips H4666C1 Headlight Bulb Overview\u003c\/h2\u003e\u003cp\u003eThe Phillips H4666C1 is a standard sealed beam halogen headlight bulb built for vehicles that use a 4.5-inch sealed beam lamp. It delivers clear light output for both high beam and low beam operation, with DOT approval and street-legal status for road use.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack focuses on value-oriented lighting for everyday repair and replacement needs. For drivers servicing a Chevrolet S10, Ford Probe, or Pontiac Firebird, the H4666C1 provides a direct lighting solution for sealed beam headlamp applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen headlight bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003eStandard sealed beam design for high beam and low beam use\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003e12.8-volt operation with 65\/45 watt output\u003c\/li\u003e\n\u003cli\u003eC-6 filament design with a single filament layout\u003c\/li\u003e\n\u003cli\u003eBulb base type: 3 contact lugs\u003c\/li\u003e\n\u003cli\u003ePhillips Standard line for practical replacement lighting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe Phillips H4666C1 is engineered as a sealed beam halogen headlight bulb for vehicles that require a standard 4.5-inch lamp format. Its clear bulb finish, glass material, and halogen technology support consistent exterior lighting performance in applications that call for both high beam and low beam function. This part number is commonly referenced for sealed beam headlamp service on models such as the Chevrolet Blazer, GMC Jimmy, and Toyota Tercel, as well as other listed applications including the Pontiac Firebird and Dodge Dakota.\u003c\/p\u003e\u003cp\u003eThis part cross-references Davico Mfg (e.g., 18535) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring dim, cloudy, or failed sealed beam headlight output\u003c\/li\u003e\n\u003cli\u003eReplacing a burned-out high beam or low beam sealed beam lamp\u003c\/li\u003e\n\u003cli\u003eServicing older vehicles with 4.5-inch sealed beam headlamps\u003c\/li\u003e\n\u003cli\u003eMaintaining road-legal exterior lighting on daily-driven vehicles\u003c\/li\u003e\n\u003cli\u003eAddressing uneven forward lighting on compatible classic and compact models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses a standard sealed beam headlamp with a 3-contact-lug base before installation. Confirm the bulb position and electrical connection match the original lamp, especially on vehicles listed for high beam and low beam service. For best results, inspect the headlamp housing and connector condition before installing the Phillips H4666C1.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eThis Phillips headlight bulb is DOT approved and street legal, with specifications aligned to standard sealed beam replacement needs. The Phillips Standard - Single Commercial Pack line is positioned as a practical lighting solution for routine automotive service.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572042989749,"sku":"BCGL-H4666C1","price":20.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4666C1_Fro.jpg?v=1774971681"},{"product_id":"phillips-h4666llc1-headlight-bulb","title":"Phillips H4666LLC1 Headlight Bulb - High Beam and Low Beam","description":"\u003ch2\u003ePhillips H4666LLC1 Halogen Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H4666LLC1 is a halogen sealed beam headlight bulb built for drivers who want value-focused replacement lighting with direct fitment for select vehicles. It is DOT approved, street legal, and uses clear glass construction with a 12.8-volt halogen design for high beam and low beam applications.\u003c\/p\u003e\u003cp\u003ePhillips LongerLife - Single Commercial Pack is the product line for drivers looking for a practical lighting replacement with extended service focus. This sealed beam headlight bulb is made for vehicles that use a 3-contact-lug base and a C-6 filament layout, making it a direct option for many older sealed beam headlamp systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHalogen headlight bulb with clear finish\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eHigh beam and low beam beam type\u003c\/li\u003e\n\u003cli\u003e12.8-volt electrical rating\u003c\/li\u003e\n\u003cli\u003e65\/45 watt sealed beam design\u003c\/li\u003e\n\u003cli\u003eGlass bulb material with 3-contact-lug base\u003c\/li\u003e\n\u003cli\u003ePhillips part number H4666LLC1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Application Details\u003c\/h2\u003e\u003cp\u003eCompatible With select sealed beam headlamp applications across Chevrolet, Ford, Geo, GMC, Pontiac, Saturn, Dodge, Mitsubishi, Toyota, Mercury, Chrysler, Plymouth, and Honda models. Fits 1995-1997 Chevrolet Blazer, High Beam and Low Beam; Fits 1995-1997 Chevrolet S10, N\/A; Fits 1994-1997 Chevrolet S10, High Beam and Low Beam; Fits 1993-1997 Ford Probe, High Beam and Low Beam; Fits 1989-1997 Geo Metro, High Beam and Low Beam; Fits 1995-1997 GMC Jimmy, High Beam and Low Beam; Fits 1994-1997 GMC Sonoma, High Beam and Low Beam; Fits 1995-1997 Pontiac Firebird, N\/A; Fits 1991-1997 Pontiac Firebird, High Beam and Low Beam; Fits 1995-1997 Pontiac Firefly, N\/A; Fits 1994-1997 Pontiac Firefly, High Beam and Low Beam; Fits 1987-1991 Pontiac Firefly, High Beam and Low Beam; Fits 1993-1996 Saturn SC2, High Beam and Low Beam; Fits 1991-1995 Dodge Dakota, High Beam and Low Beam; Fits 1991-1994 Mercury Capri, High Beam and Low Beam; Fits 1988-1994 Toyota Tercel, High Beam and Low Beam; Fits 1991-1993 Dodge Stealth, High Beam and Low Beam; Fits 1991-1993 Mitsubishi 3000GT, High Beam and Low Beam; Fits 1992 Chevrolet Metro, High Beam and Low Beam; Fits 1989-1992 Chevrolet Sprint, High Beam and Low Beam; Fits 1991-1992 Dodge Caravan, High Beam and Low Beam; Fits 1991-1992 Saturn SC, High Beam and Low Beam; Fits 1987-1991 Chrysler Daytona, High Beam and Low Beam; Fits 1987-1991 Dodge Daytona, High Beam and Low Beam; Fits 1990-1991 Mitsubishi Eclipse, High Beam and Low Beam; Fits 1990-1991 Plymouth Laser, High Beam and Low Beam; Fits 1987-1990 Dodge Dakota, High Beam and Low Beam; Fits 1987-1988 Dodge Shadow, High Beam and Low Beam; Fits 1987-1988 Plymouth Sundance, High Beam and Low Beam; Fits 1984-1985 Honda Civic, High Beam and Low Beam.\u003c\/p\u003e\u003ch2\u003eWhat This Bulb Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aging sealed beam headlight output\u003c\/li\u003e\n\u003cli\u003eFailed high beam or low beam operation\u003c\/li\u003e\n\u003cli\u003eStreet-legal replacement needs for older vehicles\u003c\/li\u003e\n\u003cli\u003eRestoration of lighting on sealed beam headlamp systems\u003c\/li\u003e\n\u003cli\u003eReplacement for worn glass halogen headlight assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses a sealed beam headlamp setup with a 3-contact-lug base before ordering. Confirm the bulb position and beam type against the vehicle listing, especially on applications marked High Beam and Low Beam or N\/A. Handle the glass bulb carefully during installation and avoid touching the lens surface with bare hands.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eThis Phillips headlight bulb is DOT approved and street legal for the listed applications. Part number H4666LLC1 is built as a halogen sealed beam replacement for direct-use lighting service on supported vehicles, including Chevrolet S10, Pontiac Firebird, and Honda Civic applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572048756917,"sku":"BCGL-H4666LLC1","price":24.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4666LLC1_Fro_c24ff9e6-df85-4fb0-9c06-3b6059d3b5e0.jpg?v=1774971681"},{"product_id":"phillips-h4701c1-headlight-bulb","title":"Phillips H4701C1 Headlight Bulb - High Beam","description":"\u003ch2\u003ePhillips H4701C1 High Beam Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H4701C1 is a standard halogen sealed beam headlight bulb for high beam applications. It is DOT approved and street legal, making it a direct lighting replacement for select vehicles that use sealed beam headlamps or four-headlight setups.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack focuses on practical value for everyday repairs. This line is built for drivers and technicians looking for a straightforward exterior lighting solution with the correct beam type, voltage, and bulb construction for the application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen headlight bulb with clear glass construction\u003c\/li\u003e\n\u003cli\u003eHigh beam beam type for forward lighting performance\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eStandard sealed beam bulb design\u003c\/li\u003e\n\u003cli\u003eSingle filament C-8 design\u003c\/li\u003e\n\u003cli\u003e14V, 65W electrical rating\u003c\/li\u003e\n\u003cli\u003eBulb base type: 2 contact lugs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePhillips H4701C1 is a standard sealed beam high beam headlight bulb engineered for vehicles that use this style of exterior lighting. With halogen technology, clear bulb finish, and a glass bulb body, it matches the requirements of many older passenger vehicles, trucks, and vans that rely on sealed beam headlamps. This part number is a fitment match for applications such as 1998-2002 Pontiac Firebird, 1988-1991 Chevrolet C1500, and 1989-1991 GMC Jimmy, along with other listed vehicles in the same sealed beam or four-headlight configurations. The H4701C1 part number also cross-references Davico Mfg 18536 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring dim, burned-out, or failed high beam headlamps\u003c\/li\u003e\n\u003cli\u003eReplacing sealed beam units on older Chevrolet, GMC, Pontiac, Jeep, and Buick vehicles\u003c\/li\u003e\n\u003cli\u003eCorrecting poor nighttime visibility from aging halogen lighting\u003c\/li\u003e\n\u003cli\u003eRepairing headlight output on four-headlight front-end setups\u003c\/li\u003e\n\u003cli\u003eMaintaining street-legal lighting on inspected vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the existing bulb style, base type, and headlamp configuration before ordering. This high beam bulb is listed for vehicles equipped with four headlights or sealed beam headlamps where noted, including applications such as 1988-1991 Chevrolet K1500, 1989-1991 GMC V2500 Suburban, and 1986-1988 Pontiac Sunbird. Confirm the vehicle year, make, model, and beam position against the fitment data to ensure the correct replacement. The H4701C1 is intended for high beam use only.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard range is positioned as a value-focused lighting line for everyday applications. This bulb is DOT approved and street legal, supporting compliance for road use where the listed fitment applies.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572049510581,"sku":"BCGL-H4701C1","price":25.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4701C1_Fro_2ec44dac-cc5c-4288-8b31-5c8fa6a48f8d.jpg?v=1774971681"},{"product_id":"phillips-h4703c1-headlight-bulb","title":"Phillips H4703C1 Headlight Bulb - Low Beam","description":"\u003ch2\u003ePhillips H4703C1 Low Beam Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H4703C1 is a standard halogen low beam headlight bulb built for clear, road-legal exterior lighting. It is DOT approved and street legal, making it a direct choice for drivers replacing a worn sealed beam low beam on select Pontiac, Chevrolet, GMC, Jeep, Buick, Chrysler, Geo, Oldsmobile, and Isuzu applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen bulb technology with clear bulb color and clear finish\u003c\/li\u003e\n\u003cli\u003eLow beam headlight bulb for exterior lighting replacement\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eStandard sealed beam design with C-8 filament type\u003c\/li\u003e\n\u003cli\u003eGlass bulb construction with 2 contact lugs base type\u003c\/li\u003e\n\u003cli\u003e14-volt, 55-watt specification\u003c\/li\u003e\n\u003cli\u003ePhillips Standard - Single Commercial Pack product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhillips positions the Standard range as a value-focused lighting solution for everyday use, and the H4703C1 follows that approach with a straightforward halogen design. The bulb is engineered for low beam service and uses a standard sealed beam format, which is important for vehicles that require this style of headlamp assembly. This part number, H4703C1, is listed for a wide range of older vehicles including the Pontiac Firebird, Chevrolet G30, and GMC G3500, along with other sealed beam and four-headlight applications.\u003c\/p\u003e\u003cp\u003eThis part cross-references Davico Mfg 18538 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aging low beam output\u003c\/li\u003e\n\u003cli\u003eBurned-out sealed beam headlight replacement needs\u003c\/li\u003e\n\u003cli\u003eReduced nighttime visibility from worn halogen lighting\u003c\/li\u003e\n\u003cli\u003eFailed DOT-compliant exterior lighting inspections\u003c\/li\u003e\n\u003cli\u003eRestoring proper low beam function on older GM, Pontiac, Jeep, and Chrysler vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses a low beam standard sealed beam headlamp and confirm the headlight configuration before ordering. Fitment includes vehicles equipped with four headlights and models with sealed beam headlamps, so matching the original lamp style is essential. Confirm the bulb base, voltage, and beam type against the existing unit before installation. Fits 1998-2002 Pontiac Firebird, low beam. Fits 1992-1996 Chevrolet G30, low beam. Fits 1988-1991 Chevrolet C1500, low beam. Fits 1985-1990 Jeep Wagoneer, low beam.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard lighting is built around practical replacement value and consistent exterior lighting performance. The H4703C1 is DOT approved and street legal for use in the listed applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572050297013,"sku":"BCGL-H4703C1","price":25.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H4703C1_Fro.jpg?v=1774971682"},{"product_id":"phillips-h5006c1-headlight-bulb","title":"Phillips H5006C1 Headlight Bulb - High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhillips H5006C1 Low Beam Headlight Bulb\u003c\/h2\u003e\u003cp\u003eThe Phillips H5006C1 is a standard sealed beam halogen headlight bulb for low beam applications. It delivers clear, DOT approved, street legal lighting for a wide range of classic and late-model vehicles, including BMW 318i, BMW 325i, Jaguar XJ6, and Chevrolet Corvette applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen bulb technology with clear glass construction\u003c\/li\u003e\n\u003cli\u003eStandard sealed beam design for low beam use\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003e12.8-volt operation with 35\/35 watt output\u003c\/li\u003e\n\u003cli\u003eBulb base type: 3 contact lugs\u003c\/li\u003e\n\u003cli\u003eFilament type: C-6 with dual filament construction\u003c\/li\u003e\n\u003cli\u003ePhillips Standard - Single Commercial Pack product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack lighting is built for straightforward replacement needs where dependable exterior lighting matters. The H5006C1 part number identifies a standard sealed beam low beam headlight bulb with a 4-inch diameter, glass bulb material, and clear finish. This halogen headlight bulb is specified for vehicles that use the H5006 sealed beam format, making it a direct service part for many older domestic, European, and import models. The Phillips H5006C1 is a practical choice for restoring low beam function on vehicles such as BMW 528e, Mercedes-Benz 560SL, and Toyota Corolla applications listed in the fitment data.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores low beam headlight output after a sealed beam failure\u003c\/li\u003e\n\u003cli\u003eReplaces dim, cloudy, or non-functioning halogen sealed beam units\u003c\/li\u003e\n\u003cli\u003eAddresses inspection failures caused by inoperative exterior lighting\u003c\/li\u003e\n\u003cli\u003eReturns proper forward lighting on classic BMW, Jaguar, Chevrolet, and Mercedes-Benz models\u003c\/li\u003e\n\u003cli\u003eSupports service work on vehicles requiring an H5006-style low beam bulb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses an H5006 standard sealed beam low beam headlamp before ordering. Confirm the 3-contact lug base, 4-inch diameter, and low beam position match the original unit. This part fits 1958-1982 Chevrolet Corvette, low beam; 1984-1992 BMW 318i, low beam; and 1976-1989 Jaguar XJS, low beam, among many other listed applications. For best results, inspect the headlamp connector, housing, and sealing surfaces during replacement and handle the glass bulb carefully to avoid contamination.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard lighting is positioned as an value-focused replacement line for everyday service applications. The H5006C1 is DOT approved and street legal, giving buyers a compliant low beam solution for vehicles that require this sealed beam format. This part cross-references common H5006 sealed beam applications for the same use case.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572052394165,"sku":"BCGL-H5006C1","price":22.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H5006C1_Fro.jpg?v=1774971682"},{"product_id":"phillips-h6024c1-headlight-bulb","title":"Phillips H6024C1 Headlight Bulb - High Beam and Low Beam","description":"\u003ch2\u003ePhillips H6024C1 Sealed Beam Headlight\u003c\/h2\u003e\u003cp\u003eThe Phillips H6024C1 is a standard halogen sealed beam headlight built for direct replacement in vehicles that use a 7-inch round headlamp. It delivers clear lighting for both high beam and low beam operation, with DOT approval and street-legal status for road use.\u003c\/p\u003e\u003cp\u003ePhillips Standard - Single Commercial Pack focuses on practical value for everyday repairs and fleet maintenance. This line is a straightforward OE-style lighting solution for drivers who need dependable exterior lighting without changing the original headlamp setup.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen sealed beam headlight with clear bulb finish\u003c\/li\u003e\n\u003cli\u003eHigh beam and low beam operation in one unit\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eGlass bulb construction with 3-contact lug base\u003c\/li\u003e\n\u003cli\u003e12.8-volt electrical rating\u003c\/li\u003e\n\u003cli\u003e65\/35 watt output for standard road lighting\u003c\/li\u003e\n\u003cli\u003ePart number H6024C1 for easy lookup and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe Phillips H6024C1 headlight bulb is a standard sealed beam design with two filaments and C-6 filament type construction. It is made for vehicles that require a 5-inch diameter sealed beam format and is listed for high beam and low beam positions. This makes it a direct-fit lighting replacement for a wide range of classic trucks, SUVs, and passenger vehicles, including Jeep Wrangler, Jeep TJ, and Ford Mustang applications where the correct sealed beam headlamp is required.\u003c\/p\u003e\u003cp\u003eUse H6024C1 when you need a clear halogen headlight that maintains the original beam pattern and factory-style appearance. This part cross-references Davico Mfg 18525 for the same application. The Phillips H6024C1 is also a practical choice for owners searching for a 7-inch round headlamp replacement for Jeep Wrangler and Jeep TJ models, as well as older Chevrolet, Dodge, and Ford vehicles listed in the fitment data.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or aging sealed beam headlights\u003c\/li\u003e\n\u003cli\u003eFailed high beam or low beam output\u003c\/li\u003e\n\u003cli\u003eCracked or clouded glass headlamp assemblies\u003c\/li\u003e\n\u003cli\u003eRoad-legal lighting replacement needs for classic vehicles\u003c\/li\u003e\n\u003cli\u003eFactory-style restoration of sealed beam headlamp systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify the vehicle uses a sealed beam headlamp with the correct 7-inch round format before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm the application by year, make, model, and headlamp position in the fitment list.\u003c\/li\u003e\n\u003cli\u003eCheck the bulb base type and connector style against the original unit before installation.\u003c\/li\u003e\n\u003cli\u003eFor vehicles such as Jeep Wrangler, Jeep TJ, and Hummer H1, review the notes for high beam and low beam coverage.\u003c\/li\u003e\n\u003cli\u003eHandle the glass carefully during installation to avoid damage to the lens or housing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard lighting products are positioned as value-focused replacements for everyday use and fleet service. The H6024C1 is DOT approved and street legal, giving buyers a compliant option for vehicles that require a standard sealed beam headlight.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572055015605,"sku":"BCGL-H6024C1","price":24.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H6024C1_Fro.jpg?v=1774971683"},{"product_id":"phillips-h6054cvc1-headlight-bulb","title":"Phillips H6054CVC1 Headlight Bulb - High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003eBright White Sealed Beam Upgrade\u003c\/h2\u003e\u003cp\u003eThe Philips CrystalVision Ultra sealed beam headlight bulb delivers a bright white road light for drivers who want a cleaner front-end appearance without giving up street-legal performance. This H6054CVC1 headlight bulb is built for vehicles with sealed beam headlamps and is DOT approved for road use.\u003c\/p\u003e\u003cp\u003eUse it for a sharper look on the road while maintaining high beam and low beam function in the same sealed beam application. The blue-coated glass and halogen construction support a whiter light output than standard sealed beam lighting.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePhilips CrystalVision Ultra sealed beam headlight bulb\u003c\/li\u003e\n\u003cli\u003ePart number H6054CVC1 for easy identification\u003c\/li\u003e\n\u003cli\u003eHalogen bulb technology with clear glass construction\u003c\/li\u003e\n\u003cli\u003eBlue-coated bulb color for a bright white appearance\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003eHigh beam and low beam beam type\u003c\/li\u003e\n\u003cli\u003e12.8V, 65\/35W sealed beam design\u003c\/li\u003e\n\u003cli\u003e3-contact lug base type\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThe CrystalVision Ultra - Single Commercial Pack line is aimed at drivers who want to personalize their vehicle lighting with a whiter, more modern look. This sealed beam headlight bulb uses a halogen filament design with two filaments and a C-6 filament type, making it suitable for vehicles that use a combined high beam and low beam sealed beam unit. The H6054CVC1 is a direct-fit lighting solution for many classic and late-model trucks, vans, SUVs, and cars that use sealed beam headlamps.\u003c\/p\u003e\u003cp\u003eFits 1996-2020 Chevrolet Express 2500, high beam and low beam; Fits 1996-2020 Chevrolet Express 3500, high beam and low beam; Fits 1996-2020 GMC Savana 2500, high beam and low beam; Fits 1996-2020 GMC Savana 3500, high beam and low beam; Fits 1999-2019 Ford E-350 Super Duty, high beam and low beam; Fits 1979-2001 Jeep Cherokee, high beam and low beam. This part cross-references 97692 and H6054BLN for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring dim or aged sealed beam headlights\u003c\/li\u003e\n\u003cli\u003eReplacing a burned-out high beam and low beam sealed beam unit\u003c\/li\u003e\n\u003cli\u003eUpdating front lighting on Chevrolet Express and GMC Savana vans\u003c\/li\u003e\n\u003cli\u003eImproving nighttime visibility on Ford E-Series and Super Duty applications\u003c\/li\u003e\n\u003cli\u003eRefreshing the look of older Jeep Cherokee and similar sealed beam vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses a sealed beam headlamp with a 5.63-inch diameter and a 3-contact lug base before ordering. Confirm the headlamp position and beam type against the vehicle listing, especially on applications that use separate high beam or low beam units. For best results, inspect the headlamp housing, connector, and aiming after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhilips builds the CrystalVision Ultra line as a DOT approved, street-legal halogen lighting option for road use. The H6054CVC1 is engineered for sealed beam applications where a bright white light output and reliable fitment matter.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572056654005,"sku":"BCGL-H6054CVC1","price":27.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H6054CVC1_Fro_40fa2f00-0cfb-40c0-9f76-c663af77ab02.jpg?v=1774971684"},{"product_id":"phillips-h6054c1-headlight-bulb","title":"Phillips H6054C1 Headlight Bulb - High Beam, High Beam and Low Beam or Low Beam","description":"\u003ch2\u003ePhillips H6054C1 Sealed Beam Headlight\u003c\/h2\u003e\u003cp\u003ePhillips H6054C1 is a standard halogen sealed beam headlight built for vehicles that use a 5.63-inch sealed beam lamp. It delivers high beam and low beam function in a clear glass housing for direct replacement service on a wide range of trucks, vans, and passenger vehicles.\u003c\/p\u003e\u003cp\u003eThe Standard - Single Commercial Pack line focuses on practical value for everyday repair work and fleet maintenance. This Phillips H6054C1 headlight bulb is DOT approved and street legal for applications that require a sealed beam headlamp meeting road-use requirements.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalogen sealed beam headlight with clear glass construction\u003c\/li\u003e\n\u003cli\u003eHigh beam and low beam operation in one unit\u003c\/li\u003e\n\u003cli\u003eDOT approved and street legal\u003c\/li\u003e\n\u003cli\u003e12.8-volt design with 65\/35 wattage rating\u003c\/li\u003e\n\u003cli\u003eStandard 3-contact lug base type\u003c\/li\u003e\n\u003cli\u003e5.63-inch diameter and length for sealed beam applications\u003c\/li\u003e\n\u003cli\u003ePhillips Standard - Single Commercial Pack product line for value-focused replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePhillips H6054C1 is a standard sealed beam headlight designed for vehicles originally equipped with H6054-style lamps. The halogen bulb technology, C-6 filament type, and dual-filament layout provide both high beam and low beam operation from a single sealed beam assembly. Its clear bulb finish and glass material support consistent light output for older and commercial vehicles that still rely on sealed beam headlamps.\u003c\/p\u003e\u003cp\u003eThis part cross-references Raybestos Brakes H6054 for the same application. It is a direct-fit option for many Chevrolet Express and GMC Savana vans, Ford E-Series models, Jeep Cherokee, and other sealed beam-equipped vehicles. Common search phrases include Phillips H6054C1 headlight bulb for Chevrolet Express 2500, sealed beam headlight for Ford E-350 Super Duty, and halogen H6054 replacement for GMC Savana 3500.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Solve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDim or failed sealed beam headlight output\u003c\/li\u003e\n\u003cli\u003eLoss of either high beam or low beam function\u003c\/li\u003e\n\u003cli\u003eReplacement needs for DOT-approved road-use lighting\u003c\/li\u003e\n\u003cli\u003eService on sealed beam headlamp systems in vans, trucks, and older cars\u003c\/li\u003e\n\u003cli\u003eRestoration of original-style lighting on vehicles such as Ford E-250, Chevrolet Astro, and Jeep Cherokee\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses a 5.63-inch sealed beam headlamp and the H6054-style 3-contact lug base before installation. Confirm whether the application calls for high beam and low beam service, or a specific beam position listed in the fitment data. For best results, inspect the headlamp connector, housing, and aiming after replacement.\u003c\/p\u003e\u003cp\u003eFits 1996-2020 Chevrolet Express 2500, high beam and low beam. Fits 1996-2020 Chevrolet Express 3500, high beam and low beam. Fits 1996-2020 GMC Savana 2500, high beam and low beam. Fits 1996-2020 GMC Savana 3500, high beam and low beam. Fits 1999-2019 Ford E-350 Super Duty, high beam and low beam. Fits 1996-2014 Chevrolet Express 1500, high beam and low beam. Fits 2002-2014 Ford E-150, high beam and low beam. Fits 2003-2014 Ford E-250, high beam and low beam. Fits 2010-2014 Ford Econoline Van, high beam and low beam. Fits 2010-2014 Ford Econoline Wagon, high beam and low beam. Fits 1996-2014 GMC Savana 1500, high beam and low beam. Fits 1999-2010 Ford F-250 Super Duty, high beam and low beam. Fits 1999-2010 Ford F-350 Super Duty, high beam and low beam. Fits 1999-2009 Ford F-250, high beam and low beam. Fits 1999-2009 Ford F-350, high beam and low beam. Fits 2007-2008 Ford E-150 Econoline, high beam and low beam. Fits 1992-2002 Ford E-150 Econoline, high beam and low beam. Fits 2007-2008 Ford E-350 Econoline, high beam and low beam. Fits 1992-2000 Ford E-350 Econoline, high beam and low beam. Fits 2004-2006 Chevrolet Colorado, high beam and low beam. Fits 2000-2006 Ford Econoline, high beam and low beam. Fits 1995-2005 Chevrolet Astro, high beam and low beam. Fits 2003-2005 Ford E-150 Club Wagon, high beam and low beam. Fits 2002-2005 Ford E-350 Club Wagon, high beam and low beam. Fits 1995-2005 GMC Safari, high beam and low beam. Fits 1998-2004 Nissan Pickup, low beam. Fits 1993 Nissan Pickup, low beam. Fits 1988-1990 Nissan Pickup, low beam. Fits 1985-1986 Nissan Pickup, low beam. Fits 1998-2004 Nissan Pickup, high beam. Fits 1993 Nissan Pickup, high beam. Fits 1988-1990 Nissan Pickup, high beam. Fits 1985-1986 Nissan Pickup, high beam. Fits 1992-2002 Ford E-150 Econoline Club Wagon, high beam and low beam. Fits 1992-2002 Ford E-250 Econoline, high beam and low beam. Fits 1992-2002 Ford E-350 Econoline Club Wagon, high beam and low beam. Fits 1979-2001 Jeep Cherokee, high beam and low beam.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePhillips Standard range is positioned as a value-focused lighting solution for everyday replacement needs. This H6054C1 headlight is DOT approved and street legal for listed applications.\u003c\/p\u003e","brand":"Phillips","offers":[{"title":"Default Title","offer_id":43572058554549,"sku":"BCGL-H6054C1","price":20.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/PL_H6054C1_Fro.jpg?v=1774971684"}],"url":"https:\/\/www.partcatalog.com\/collections\/lighting-exterior-2.oembed?page=473","provider":"PartCatalog","version":"1.0","type":"link"}