{"title":"Exhaust \u003e Mufflers","description":"\u003cp\u003eMufflers and resonators reduce exhaust noise and help tune back-pressure for proper engine performance. Most last 5–7 years, but road salt, moisture trapped inside, and stop-and-go driving can cut that lifespan significantly shorter — especially in northern states. Rust-through, physical damage from bottoming out, or failed seam welds are the most common failure points. When shopping, decide between direct-fit assemblies (bolt-on, no cutting or welding) and universal units (cheaper, but require fabrication). OEM-spec replacements match your factory tone and fitment exactly; performance aftermarket options from brands like Flowmaster, Borla, and MagnaFlow offer reduced restriction and a more aggressive exhaust note. Always verify connection diameter, inlet\/outlet positions, and overall pipe length before ordering — these specs vary widely even within the same make and model year range.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoud roaring or rumbling from underneath the vehicle\u003c\/strong\u003e — A muffler with a rusted-through casing or cracked baffle wall loses its ability to dampen exhaust pulses, producing a noticeably louder, deeper exhaust note that gets worse under acceleration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRattling or buzzing at idle or low RPM\u003c\/strong\u003e — Internal baffles can corrode and break loose inside the muffler shell, causing a metallic rattling that's often mistaken for a heat shield. It typically gets louder as the exhaust heats up.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisible rust, holes, or corrosion on the muffler body\u003c\/strong\u003e — Surface rust is cosmetic, but through-rust or pinhole perforations let exhaust gases escape before the muffler can process them, reducing noise suppression and potentially routing fumes toward the cabin.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmell of exhaust inside the cabin\u003c\/strong\u003e — A failed muffler or resonator joint can direct CO-containing exhaust gases toward the firewall or floor seams. This is a safety issue that warrants immediate inspection, not just a nuisance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFailed emissions or inspection test\u003c\/strong\u003e — Some jurisdictions test for exhaust leaks visually or by sound. A compromised muffler assembly can cause an outright inspection failure regardless of emissions readings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduced fuel economy without another clear cause\u003c\/strong\u003e — A collapsed baffle or heavily restricted muffler increases exhaust back-pressure, forcing the engine to work harder and burning more fuel in the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow long do mufflers typically last, and does driving style affect it?\u003c\/strong\u003e\n  Average muffler lifespan is 5–7 years or roughly 60,000–100,000 miles under normal conditions. Short-trip drivers actually see faster corrosion — condensation inside the muffler never fully burns off, accelerating rust from the inside out. Highway-heavy driving is easier on exhaust components overall.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eIs an OEM muffler worth the premium over an aftermarket replacement?\u003c\/strong\u003e\n  OEM units guarantee an exact fit and match the factory sound profile, which matters for luxury or performance vehicles with tuned exhaust notes. Quality aftermarket options — aluminized or stainless steel from brands like Walker, Flowmaster, or Borla — offer comparable durability at 30–60% less cost and are the practical choice for most daily drivers.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat does a muffler replacement typically cost, and what else should I replace at the same time?\u003c\/strong\u003e\n  Parts run $50–$350 depending on vehicle and brand; labor adds $75–$200 at most shops. Since the system is already apart, it's smart to inspect and replace exhaust clamps, flex pipes, and the tailpipe section simultaneously — especially if any show rust. Doing it all at once avoids a second labor charge within a year.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"ap-exhaust-2466-exhaust-muffler","title":"AP Exhaust 2466 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 2466 Muffler for Ford E-Series\u003c\/h2\u003e\u003cp\u003eAP Exhaust 2466 is a regular-grade oval muffler built for OE-comparable sound control in Ford E-Series applications. It uses a baffled muffler design with aluminized steel construction and 3-inch pipe connections for a direct exhaust replacement on select vans and wagons.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: AP Exhaust\u003c\/li\u003e\n\u003cli\u003ePart number: 2466\u003c\/li\u003e\n\u003cli\u003eChallenge series muffler\u003c\/li\u003e\n\u003cli\u003eOval body shape with baffled internal design\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for everyday exhaust service\u003c\/li\u003e\n\u003cli\u003e3-inch inlet and 3-inch outlet pipe connections\u003c\/li\u003e\n\u003cli\u003eInlet location: right center; outlet location: left center\u003c\/li\u003e\n\u003cli\u003eOE-comparable sound level\u003c\/li\u003e\n\u003cli\u003eOverall length: 33.75 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is part of the Challenge series and is configured as O\/OO with a single right-center inlet and single left-center outlet. The oval 7 x 9 x 24-inch body layout and baffled construction are suited to exhaust service where factory-style sound control and standard replacement dimensions matter. AP Exhaust 2466 is a practical choice for maintaining the exhaust layout on Ford E-150, Ford E-250, and Ford E-350 applications listed below.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2003 Ford E-150, N\/A. Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Federal Models\u003c\/li\u003e\n\u003cli\u003eFits 2003 Ford E-150 Club Wagon, N\/A. Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Federal Models\u003c\/li\u003e\n\u003cli\u003eFits 2003 Ford E-350 Club Wagon, N\/A. Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Federal Models\u003c\/li\u003e\n\u003cli\u003eFits 2000-2003 Ford E-350 Super Duty, N\/A. Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Federal Models\u003c\/li\u003e\n\u003cli\u003eFits 2000-2002 Ford E-350 Econoline Club Wagon, N\/A. Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Federal Models\u003c\/li\u003e\n\u003cli\u003eFits 2000 Ford E-150 Econoline, N\/A. Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Federal Models\u003c\/li\u003e\n\u003cli\u003eFits 2000 Ford E-150 Econoline Club Wagon, N\/A. Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Federal Models\u003c\/li\u003e\n\u003cli\u003eFits 2000 Ford E-250 Econoline, N\/A. Challenge LTW; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.; Federal Models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Replacement Reasons\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or corrosion in the muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise that is louder than factory levels\u003c\/li\u003e\n\u003cli\u003eInternal baffle wear causing reduced sound control\u003c\/li\u003e\n\u003cli\u003eReplacement for a welded OE muffler assembly on Ford E-Series vans\u003c\/li\u003e\n\u003cli\u003eRestoring proper exhaust routing on 3-inch pipe systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation before installation: this muffler uses a right-center inlet and left-center outlet. Confirm 3-inch pipe sizing and compare the overall length and body dimensions to the original exhaust layout before welding or fitting. For the listed Ford E-Series applications, the OE system was a welded assembly, so related exhaust components should be inspected together during service.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures this muffler as a regular-grade replacement component for OE-style exhaust service. The aluminized steel body and baffled construction support everyday use in the specified Ford E-150, Ford E-250, and Ford E-350 applications.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385496535221,"sku":"BBDL-2466","price":122.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_2466_Fro_a2715fbd-576a-4b67-af03-a57a07c2d360.jpg?v=1774704063"},{"product_id":"ap-exhaust-2527-exhaust-muffler","title":"AP Exhaust 2527 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 2527 Muffler for Toyota Tundra\u003c\/h2\u003e\u003cp\u003eAP Exhaust 2527 is a Challenge Series exhaust muffler built for 2007-2010 Toyota Tundra applications. It uses a baffled V configuration with OE-comparable sound level, making it a direct choice for replacing a worn factory muffler on the Toyota Tundra.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number 2527 from AP Exhaust\u003c\/li\u003e\n\u003cli\u003eChallenge Series exhaust muffler\u003c\/li\u003e\n\u003cli\u003eOval body with aluminized steel construction\u003c\/li\u003e\n\u003cli\u003eBaffled muffler design with OE-comparable sound level\u003c\/li\u003e\n\u003cli\u003eDual 2-inch inlet pipes, left center \/ right center location\u003c\/li\u003e\n\u003cli\u003eSingle 2.25-inch center lower outlet\u003c\/li\u003e\n\u003cli\u003eBody dimensions: 8.5 in. height, 11.5 in. width, 20 in. length\u003c\/li\u003e\n\u003cli\u003eOverall length: 24 in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is engineered as a regular-grade replacement for the factory exhaust on 2007-2010 Toyota Tundra trucks. The aluminized steel body helps resist everyday exhaust-system wear, while the baffled internal design supports an OE-level sound profile for drivers who want a stock-style exhaust note. If you are searching for an AP Exhaust 2527 muffler for Toyota Tundra 2007-2010 or an OE-style replacement muffler for a welded factory system, this part matches that application.\u003c\/p\u003e\u003cp\u003eThis part cross-references Toyota OE number 174200F040 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a rusted, leaking, or damaged factory muffler\u003c\/li\u003e\n\u003cli\u003eRestoring exhaust tone on a 2007-2010 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003eAddressing exhaust noise from internal muffler wear\u003c\/li\u003e\n\u003cli\u003eReplacing a welded OE muffler assembly during exhaust service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eCompatible with 2007-2010 Toyota Tundra, N\/A. The OE system was a welded assembly, and AP Exhaust notes that related parts identified in the vehicle application should be replaced during service. Verify inlet and outlet sizing, inlet location, and overall length before installation to confirm proper exhaust alignment on your Toyota Tundra.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust Challenge Series mufflers are built for direct-fit exhaust service with OE-comparable sound characteristics and aluminized steel construction for everyday durability.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385496600757,"sku":"BBDL-2527","price":87.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_2527_Fro_a7e0edb7-9170-4a39-a160-7e32a5614953.jpg?v=1774704064"},{"product_id":"ap-exhaust-2551-exhaust-muffler","title":"AP Exhaust 2551 Exhaust Muffler - Left","description":"\u003ch2\u003eAP Exhaust 2551 Muffler Overview\u003c\/h2\u003e\u003cp\u003eAP Exhaust 2551 is an aluminized steel exhaust muffler from the Challenge series, built in an oval baffled configuration with OE-comparable sound level. It uses a 2-inch pipe inlet and a 2-inch spout outlet in an O\/C layout for direct replacement service on select Ford Edge and Lincoln MKX applications.\u003c\/p\u003e\u003cp\u003eCompatible With 2007-2010 Ford Edge, left, and 2007-2010 Lincoln MKX, left. This AP Exhaust 2551 muffler is a practical choice when replacing a worn or damaged rear exhaust component on vehicles with a welded OE system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel body for everyday exhaust service\u003c\/li\u003e\n\u003cli\u003eOval, baffled muffler design for OE-comparable sound control\u003c\/li\u003e\n\u003cli\u003e2-inch inlet and 2-inch outlet sizing\u003c\/li\u003e\n\u003cli\u003eRight-center inlet and center outlet layout\u003c\/li\u003e\n\u003cli\u003eChallenge series construction for select replacement applications\u003c\/li\u003e\n\u003cli\u003eFits 2007-2010 Ford Edge, left, and 2007-2010 Lincoln MKX, left\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust part number 2551 is an exhaust muffler engineered with a 12-inch body length, 11-inch body width, and 5.5-inch body height, with an overall length of 25 inches. The oval muffler body is made from aluminized steel and uses a baffled internal design to maintain an OE-comparable sound level without tunability. Its inlet is positioned at the right center, while the outlet is centered, matching the layout needed for the listed Ford Edge and Lincoln MKX left-side applications. This part cross-references Ford OE number 8T4Z5230A for the same application.\u003c\/p\u003e\u003cp\u003eFor drivers searching for a Ford Edge muffler replacement or a Lincoln MKX left muffler replacement, AP Exhaust 2551 provides a direct-fit service option for the specified model years. The welded OE system note means related exhaust sections should be inspected closely during replacement.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Muffler Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise caused by a rusted or leaking muffler body\u003c\/li\u003e\n\u003cli\u003eReduced sound control from a damaged internal baffle structure\u003c\/li\u003e\n\u003cli\u003eCorrosion-related failure in an aluminized steel exhaust section\u003c\/li\u003e\n\u003cli\u003eFitment issues when replacing the left-side muffler on a welded OE system\u003c\/li\u003e\n\u003cli\u003eExhaust vibration or rattling from a deteriorated muffler assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation before installation, since this muffler uses a right-center inlet and center outlet configuration. Because the OE system was a welded assembly on the listed Ford Edge and Lincoln MKX applications, inspect adjoining exhaust parts for wear, corrosion, or damage before beginning the repair. Confirm left-side placement and match the 2-inch pipe connections to the existing exhaust layout.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for service applications that require OE-style fit and sound characteristics. Part number 2551 is built to the listed dimensions and configuration for the specified Ford Edge and Lincoln MKX fitments.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385496666293,"sku":"BBDL-2551","price":125.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_2551_Fro.jpg?v=1774704065"},{"product_id":"ap-exhaust-2567-exhaust-muffler","title":"AP Exhaust 2567 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust Challenge LTW Muffler for Ram 1500\u003c\/h2\u003e\u003cp\u003eThe AP Exhaust Challenge LTW 2567 is a baffled exhaust muffler built for Ram 1500 applications with factory dual exhaust layouts. It uses an aluminized steel body and an oval case to support OE-comparable sound levels while maintaining a direct-fit style for the listed vehicles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAP Exhaust Challenge LTW series muffler\u003c\/li\u003e\n\u003cli\u003ePart number 2567\u003c\/li\u003e\n\u003cli\u003eAluminized steel body construction\u003c\/li\u003e\n\u003cli\u003eOval muffler shape with baffled internal design\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level\u003c\/li\u003e\n\u003cli\u003eSingle 3-inch inlet, left upper location\u003c\/li\u003e\n\u003cli\u003eDual 2.25-inch outlets, left lower and right lower locations\u003c\/li\u003e\n\u003cli\u003eBody dimensions: 8.5 in. height, 11.5 in. width, 26 in. length\u003c\/li\u003e\n\u003cli\u003eOverall length: 37.5 in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChallenge LTW Series Details\u003c\/h2\u003e\u003cp\u003eThe Challenge LTW line from AP Exhaust focuses on replacement mufflers for truck applications that need controlled exhaust tone and factory-style routing. This AP Exhaust muffler, part number 2567, uses a baffled muffler configuration to help maintain a sound profile close to OE while matching the inlet and outlet layout used on the specified Ram and Dodge Ram 1500 models.\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2017-2018 Ram 1500, N\/A, Dual Exhaust; Challenge LTW\u003c\/li\u003e\n\u003cli\u003eFits 2011-2016 Ram 1500, N\/A, Challenge LTW; w\/ Factory Duals\u003c\/li\u003e\n\u003cli\u003eFits 2009-2010 Dodge Ram 1500, N\/A, Challenge LTW; w\/ Factory Duals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat This Muffler Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise that has become louder than factory levels\u003c\/li\u003e\n\u003cli\u003eReplacement needs for a damaged or corroded muffler body\u003c\/li\u003e\n\u003cli\u003eRestoring factory-style exhaust routing on dual-exhaust trucks\u003c\/li\u003e\n\u003cli\u003eMaintaining an OE-comparable exhaust note on Ram 1500 applications\u003c\/li\u003e\n\u003cli\u003eReplacing a worn muffler with the correct inlet and outlet configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation before installation: this muffler uses a 3-inch left upper inlet and dual 2.25-inch left lower\/right lower outlets. Confirm the vehicle has the listed factory dual exhaust configuration and match the overall length and body dimensions to the existing exhaust layout before final fitment. AP Exhaust 2567 is listed for 2009-2018 Ram 1500 and Dodge Ram 1500 applications shown above.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for direct-fit service applications, and the Challenge LTW 2567 is built with aluminized steel for standard corrosion resistance in exhaust use. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385496699061,"sku":"BBDL-2567","price":130.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_2567_Fro_16585e97-ff05-4665-a0ff-b6c6cacfd526.jpg?v=1774704066"},{"product_id":"ap-exhaust-2579-exhaust-muffler","title":"AP Exhaust 2579 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 2579 Muffler for Express and Savana\u003c\/h2\u003e\u003cp\u003eAP Exhaust 2579 is a baffled oval exhaust muffler built with aluminized steel for service on select Chevrolet Express and GMC Savana vans. It uses a dual-inlet, single-outlet layout with OE-comparable sound level for direct replacement needs on the factory exhaust path.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number 2579 from AP Exhaust Challenge series\u003c\/li\u003e\n\u003cli\u003eOval muffler body with aluminized steel construction\u003c\/li\u003e\n\u003cli\u003eBaffled muffler design with OE-comparable sound level\u003c\/li\u003e\n\u003cli\u003eDual 3-inch inlet pipes, left upper \/ right upper location\u003c\/li\u003e\n\u003cli\u003eSingle 3-inch center lower outlet pipe\u003c\/li\u003e\n\u003cli\u003eBody dimensions: 8.5 in. height, 11.5 in. width, 24 in. length\u003c\/li\u003e\n\u003cli\u003eOverall length: 29.25 in.\u003c\/li\u003e\n\u003cli\u003eNo heat shield attached\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is built for 2003-2009 Chevrolet Express 2500, 2003-2009 Chevrolet Express 3500, 2003-2009 GMC Savana 2500, and 2003-2009 GMC Savana 3500 applications with 4.8L or 6.0L engines and 155-inch wheelbase notes. The AP Exhaust 2579 uses a D\/C configuration and baffled internal design to match the factory exhaust routing on these vans, where the OE system was originally a welded assembly. For Chevrolet Express and GMC Savana owners replacing a worn factory muffler, this part number 2579 provides the correct inlet and outlet layout for the listed vehicles.\u003c\/p\u003e\u003cp\u003eThis part cross-references 25851450 and 25851453 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Is Used For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a rusted or damaged factory muffler\u003c\/li\u003e\n\u003cli\u003eRestoring exhaust flow on a welded OE-style system\u003c\/li\u003e\n\u003cli\u003eAddressing exhaust noise that has become louder than stock\u003c\/li\u003e\n\u003cli\u003eCorrecting fitment issues on dual-inlet, single-outlet van exhaust layouts\u003c\/li\u003e\n\u003cli\u003eServicing exhaust systems on Express and Savana 2500\/3500 vans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s engine, wheelbase, and exhaust routing before installation. This muffler is listed for 2003-2009 Chevrolet Express 2500 and 3500, plus 2003-2009 GMC Savana 2500 and 3500, with 4.8L and 6.0L engine notes. Because the OE system was welded, related exhaust parts noted in the fitment comments should be inspected and replaced as needed to complete the repair.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust Challenge mufflers are built as regular-grade replacement exhaust components for direct-fit service on the listed applications. The aluminized steel body and baffled construction support dependable OE-style replacement use on compatible Chevrolet Express and GMC Savana vans.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385496862901,"sku":"BBDL-2579","price":130.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_2579_Fro.jpg?v=1774704066"},{"product_id":"ap-exhaust-2589-exhaust-muffler","title":"AP Exhaust 2589 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 2589 Muffler Overview\u003c\/h2\u003e\u003cp\u003eAP Exhaust 2589 is an oval, baffled exhaust muffler built with aluminized steel for service in heavy-duty truck exhaust systems. It uses a 3.5-inch pipe inlet and 3.5-inch pipe outlet with an OE-comparable sound level, making it a practical replacement for drivers looking to restore factory-style exhaust tone on select Chevrolet Silverado 2500 HD, Silverado 3500 HD, GMC Sierra 2500 HD, and Sierra 3500 HD applications.\u003c\/p\u003e\u003cp\u003eFor 2007-2010 Chevrolet Silverado 2500 HD and 2007-2010 GMC Sierra 2500 HD, as well as 2007-2010 Chevrolet Silverado 3500 HD and GMC Sierra 3500 HD, AP Exhaust 2589 supports direct-fit exhaust service where the original system used welded assembly construction. It also cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOval muffler design with baffled internal construction\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for exhaust system durability\u003c\/li\u003e\n\u003cli\u003e3.5-inch pipe inlet and 3.5-inch pipe outlet\u003c\/li\u003e\n\u003cli\u003eRight-center inlet and left-center outlet layout\u003c\/li\u003e\n\u003cli\u003eOE-comparable sound level for factory-style exhaust tone\u003c\/li\u003e\n\u003cli\u003eChallenge series AP Exhaust 2589 replacement muffler\u003c\/li\u003e\n\u003cli\u003eCompatible with select Chevrolet Silverado and GMC Sierra HD trucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 2589 is a regular-grade exhaust muffler with an oval shape, 20-inch body length, 8.5-inch body height, and 11.5-inch body width. The 26-inch overall length and center-offset pipe layout support installation in applications that match the original exhaust routing. Its baffled muffler type is suited for drivers who want controlled exhaust flow and a sound profile close to OE levels rather than an aggressive tone.\u003c\/p\u003e\u003cp\u003eThis muffler is listed for 2007-2010 Chevrolet Silverado 2500 HD, 2007-2010 Chevrolet Silverado 3500 HD, 2007-2010 GMC Sierra 2500 HD, and 2007-2010 GMC Sierra 3500 HD, plus 2007 Chevrolet Silverado 2500 HD Classic, Silverado 3500 Classic, Sierra 2500 HD Classic, and Sierra 3500 Classic. AP Exhaust 2589 is a strong match for buyers searching for a 2007-2010 Chevrolet Silverado 2500 HD muffler replacement or a 2007-2010 GMC Sierra 3500 HD exhaust muffler with OE-style sound.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Muffler Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or corrosion in the original muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise increase from a damaged internal baffle\u003c\/li\u003e\n\u003cli\u003eFactory muffler replacement after welded-system service work\u003c\/li\u003e\n\u003cli\u003eLoss of OE-style exhaust tone on HD pickup trucks\u003c\/li\u003e\n\u003cli\u003eFitment replacement for worn Silverado and Sierra exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation before installation: this muffler uses a right-center inlet and left-center outlet with 3.5-inch pipe connections. Because the OE system was a welded assembly on the listed vehicles, replacement often requires matching the surrounding exhaust sections noted for the application. Confirm clearance around the oval body and overall length before final welding or clamping.\u003c\/p\u003e\u003cp\u003eAP Exhaust 2589 is intended for direct replacement use on the listed Chevrolet Silverado and GMC Sierra HD applications. Review the vehicle notes carefully, especially the Classic-series and cab\/chassis exclusions, to confirm the correct exhaust routing before service.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for service applications that require OE-style fit and sound characteristics. The 2589 muffler is built from aluminized steel and uses a baffled design to support consistent exhaust performance in the specified heavy-duty truck fitments.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497026741,"sku":"BBDL-2589","price":169.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_2589_Fro_495ef964-3837-455c-8a02-eb8835039545.jpg?v=1774704067"},{"product_id":"ap-exhaust-6592-exhaust-muffler","title":"AP Exhaust 6592 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 6592 Muffler for Ford Trucks\u003c\/h2\u003e\u003cp\u003eThe AP Exhaust 6592 is a round, baffled exhaust muffler built with aluminized steel and OE-comparable sound output. It is a direct-fit MSL\/Maximum muffler for select Ford Bronco, F-150, F-250, and F-350 applications from 1987-1996, with a 2.25-inch center upper inlet and right lower outlet.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: AP Exhaust\u003c\/li\u003e\n\u003cli\u003ePart number: 6592\u003c\/li\u003e\n\u003cli\u003eRound muffler with a 7-inch body diameter\u003c\/li\u003e\n\u003cli\u003e24.5-inch body length and 28.5-inch overall length\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for standard exhaust service\u003c\/li\u003e\n\u003cli\u003eBaffled muffler design with OE-comparable sound level\u003c\/li\u003e\n\u003cli\u003eSingle 2.25-inch inlet and single 2.25-inch outlet\u003c\/li\u003e\n\u003cli\u003eCenter upper inlet location and right lower outlet location\u003c\/li\u003e\n\u003cli\u003eMSL series direct-fit replacement for select Ford trucks and SUVs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 6592 is a replacement exhaust muffler for drivers seeking a direct-fit solution for classic Ford truck and SUV platforms. Its round, baffled construction and OE-comparable sound level make it a practical choice for restoring factory-style exhaust tone on 1987-1996 Ford Bronco, 1987-1996 Ford F-150, 1987-1996 Ford F-250, and 1987-1996 Ford F-350 applications. The 2.25-inch center upper inlet and right lower outlet layout supports the original routing used on these vehicles, while the aluminized steel body provides a durable standard-grade construction for exhaust service. This AP Exhaust 6592 muffler is part of the MSL series and is built for direct-fit replacement use on the listed Ford applications.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1987-1996 Ford Bronco, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1987-1996 Ford F-150, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1987-1996 Ford F-250, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1994-1996 Ford F-250, N\/A; to 8500 lbs. G.V.W.\u003c\/li\u003e\n\u003cli\u003eFits 1987-1996 Ford F-350, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Reasons for Replacement\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise that has become louder than factory levels\u003c\/li\u003e\n\u003cli\u003eRust or corrosion in the muffler body\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from internal wear or damage\u003c\/li\u003e\n\u003cli\u003eNeed to restore a direct-fit muffler on a Ford Bronco, F-150, F-250, or F-350\u003c\/li\u003e\n\u003cli\u003eReplacement for a worn OE-style baffled muffler with the correct inlet and outlet layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Quality Assurance\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation, body dimensions, and vehicle application before installation. This muffler uses a pipe-style inlet and outlet with a center upper inlet and right lower outlet configuration, so matching the original exhaust routing is important for proper fitment. AP Exhaust part 6592 is an MSL series direct-fit muffler for the listed Ford applications.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497092277,"sku":"BBDL-6592","price":62.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_6592_Fro.jpg?v=1774704068"},{"product_id":"ap-exhaust-6672-exhaust-muffler","title":"AP Exhaust 6672 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 6672 Muffler for Toyota and Isuzu\u003c\/h2\u003e\u003cp\u003eAP Exhaust 6672 is a round, baffled exhaust muffler built with aluminized steel for direct-fit replacement on select Toyota, Isuzu, and Chevrolet LUV applications. It is an OE-comparable sound-level muffler with a 180° configuration, center upper inlet, and center lower outlet for factory-style routing.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number 6672 from AP Exhaust\u003c\/li\u003e\n\u003cli\u003eRound muffler body with 6-inch diameter and 20-inch body length\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction for everyday exhaust service\u003c\/li\u003e\n\u003cli\u003eBaffled muffler design with OE comparable sound level\u003c\/li\u003e\n\u003cli\u003eCenter upper inlet and center lower outlet, both 1.71 inches inside diameter\u003c\/li\u003e\n\u003cli\u003e180° muffler configuration for direct-fit exhaust routing\u003c\/li\u003e\n\u003cli\u003eCompatible with select Toyota 4Runner, Toyota Pickup, Isuzu Pickup, Isuzu Trooper, and Chevrolet LUV applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 6672 is part of the MSL series and is built as a regular-grade exhaust muffler for vehicles that need a factory-style replacement. Its round body measures 6 inches in diameter with a 24.25-inch overall length, while the baffled internal design supports an OE comparable exhaust note. This muffler uses pipe-style inlet and outlet connections with 1.71-inch inside diameters, making it a direct-fit option for listed Toyota Pickup, Toyota 4Runner, Isuzu Pickup, Isuzu Trooper, and Chevrolet LUV applications. The part number 6672 is a practical choice when replacing a worn muffler on older truck and SUV exhaust systems.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1990-1995 Toyota 4Runner, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; except California\u003c\/li\u003e\n\u003cli\u003eFits 1984-1988 Toyota 4Runner, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1989-1995 Toyota Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; except California\u003c\/li\u003e\n\u003cli\u003eFits 1992-1994 Toyota Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; California\u003c\/li\u003e\n\u003cli\u003eFits 1981-1988 Toyota Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1981-1983 Toyota Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; except Heavy Duty Cab and Chassis\u003c\/li\u003e\n\u003cli\u003eFits 1979-1980 Toyota Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; 1\/2 Ton; with Converter\u003c\/li\u003e\n\u003cli\u003eFits 1979-1980 Toyota Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; 1\/2 Ton; without Converter\u003c\/li\u003e\n\u003cli\u003eFits 1979-1980 Toyota Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; 1\/2-3\/4 Ton, with Converter; except Heavy Duty Cab and Chassis\u003c\/li\u003e\n\u003cli\u003eFits 1979-1980 Toyota Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; 1\/2-3\/4 Ton, without Converter\u003c\/li\u003e\n\u003cli\u003eFits 1981-1987 Isuzu Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Std. Cargo Box; with Converter\u003c\/li\u003e\n\u003cli\u003eFits 1981-1987 Isuzu Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Extended Cargo Box\u003c\/li\u003e\n\u003cli\u003eFits 1981-1987 Isuzu Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Std. Cargo Box\u003c\/li\u003e\n\u003cli\u003eFits 1981-1985 Isuzu Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Extended Cargo Box; with Converter\u003c\/li\u003e\n\u003cli\u003eFits 1981 Isuzu Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Extended Cargo Box; without Converter\u003c\/li\u003e\n\u003cli\u003eFits 1981 Isuzu Pickup, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Std. Cargo Box; without Converter\u003c\/li\u003e\n\u003cli\u003eFits 1984-1985 Isuzu Trooper, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1979-1982 Chevrolet LUV, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Converter\u003c\/li\u003e\n\u003cli\u003eFits 1981-1982 Chevrolet LUV, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Extended Cargo Box, with Converter\u003c\/li\u003e\n\u003cli\u003eFits 1981-1982 Chevrolet LUV, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Std. Cargo Box; with Converter\u003c\/li\u003e\n\u003cli\u003eFits 1982 Chevrolet LUV, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Extended Cargo Box\u003c\/li\u003e\n\u003cli\u003eFits 1982 Chevrolet LUV, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Std. Cargo Box\u003c\/li\u003e\n\u003cli\u003eFits 1981 Chevrolet LUV, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Extended Cargo Box, without Converter\u003c\/li\u003e\n\u003cli\u003eFits 1981 Chevrolet LUV, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; with Std. Cargo Box, without Converter\u003c\/li\u003e\n\u003cli\u003eFits 1979-1980 Chevrolet LUV, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; Extended Cargo Box without Converter\u003c\/li\u003e\n\u003cli\u003eFits 1979-1980 Chevrolet LUV, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; Std. Cargo Box without Converter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Replacement Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a rusted or damaged muffler on a Toyota Pickup or Toyota 4Runner\u003c\/li\u003e\n\u003cli\u003eRestoring factory-style exhaust tone on older Isuzu Pickup and Isuzu Trooper models\u003c\/li\u003e\n\u003cli\u003eAddressing exhaust noise from a failing baffled muffler\u003c\/li\u003e\n\u003cli\u003eReplacing a direct-fit muffler on Chevrolet LUV trucks with converter or cargo-box-specific configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the inlet and outlet location, pipe diameter, and vehicle-specific notes before installation. This AP Exhaust 6672 muffler is listed for direct-fit MSL\/MAXIMUM applications, but California and converter-related notes vary by vehicle and model year. Match the existing exhaust routing on your Toyota Pickup, Toyota 4Runner, or Isuzu Pickup before final fitment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust supplies this muffler as a regular-grade aluminized steel replacement in the MSL series. The baffled construction and OE comparable sound level support a factory-style repair for listed applications. Part number 6672 is cataloged for direct-fit use on the vehicles shown above.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497125045,"sku":"BBDL-6672","price":60.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_6672_Fro_66ac6889-abee-4453-8196-706c7f8dbd5b.jpg?v=1774704068"},{"product_id":"ap-exhaust-7032-exhaust-muffler-assembly","title":"AP Exhaust 7032 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7032 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7032 is an exhaust muffler assembly built with aluminized steel for service on select Chevrolet hatchback applications. It is a direct-fit replacement for vehicles that require a welded muffler assembly and is listed for the Aveo and Aveo5 in the model years shown below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel construction for exhaust system service\u003c\/li\u003e\n\u003cli\u003eExhaust muffler assembly for welded-assembly applications\u003c\/li\u003e\n\u003cli\u003eFits 2004-2006 Chevrolet Aveo, N\/A, Welded Assembly; (Hatchback)\u003c\/li\u003e\n\u003cli\u003eFits 2006-2011 Chevrolet Aveo5, N\/A, Welded Assembly; (Hatchback)\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7032 for application matching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler assembly is designed for Chevrolet Aveo and Chevrolet Aveo5 hatchback models that use a welded exhaust assembly. The aluminized steel material provides a practical balance of corrosion resistance and exhaust-system durability for everyday replacement service. If you are searching for an AP Exhaust 7032 muffler assembly for a 2004-2006 Chevrolet Aveo hatchback or a 2006-2011 Chevrolet Aveo5 hatchback, this part matches the listed fitment and application notes. This part cross-references OE number 96536904 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or deterioration in the muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise from a damaged muffler assembly\u003c\/li\u003e\n\u003cli\u003eFailure of a welded factory-style exhaust section\u003c\/li\u003e\n\u003cli\u003eReplacement needs on a Chevrolet Aveo or Aveo5 hatchback exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, model, and hatchback configuration before ordering. This part is listed for welded assembly applications, so confirm the existing exhaust layout and mounting style on the vehicle. Match the part number 7032 to the original application details for proper fitment on Chevrolet Aveo and Aveo5 models.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust supplies exhaust components for replacement service, and this muffler assembly is built with aluminized steel for the listed applications. Confirm fitment against the vehicle’s exhaust configuration before installation.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497354421,"sku":"BBDL-7032","price":135.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7032_Fro.jpg?v=1774704069"},{"product_id":"ap-exhaust-7047-exhaust-muffler-assembly","title":"AP Exhaust 7047 Exhaust Muffler Assembly - Rear","description":"\u003ch2\u003eAP Exhaust 7047 Rear Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7047 is an aluminized steel exhaust muffler assembly for rear exhaust service on select Lexus and Toyota applications. It is built for direct-fit replacement use where the original muffler assembly has rusted, leaked, or become noisy.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel construction for exhaust system durability\u003c\/li\u003e\n\u003cli\u003eExhaust muffler assembly for rear position applications\u003c\/li\u003e\n\u003cli\u003eDirect replacement for select Lexus RX350, RX400h, RX330, and Toyota Highlander models\u003c\/li\u003e\n\u003cli\u003eWelded muffler assembly design for OE-style exhaust service\u003c\/li\u003e\n\u003cli\u003ePart number 7047 for catalog and fitment lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2007-2009 Lexus RX350, rear, welded exhaust muffler assembly.\u003c\/li\u003e\n\u003cli\u003eFits 2006-2007 Lexus RX400h, rear, welded exhaust muffler assembly.\u003c\/li\u003e\n\u003cli\u003eFits 2004-2007 Toyota Highlander, N\/A, welded exhaust muffler assembly.\u003c\/li\u003e\n\u003cli\u003eFits 2004-2007 Toyota Highlander, rear, welded exhaust muffler assembly.\u003c\/li\u003e\n\u003cli\u003eFits 2004-2006 Lexus RX330, rear, welded exhaust muffler assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7047 is an exhaust muffler assembly made from aluminized steel for corrosion resistance in everyday driving conditions. This rear muffler assembly is listed for 2007-2009 Lexus RX350, 2006-2007 Lexus RX400h, 2004-2007 Toyota Highlander, and 2004-2006 Lexus RX330 applications, with welded exhaust muffler assembly notes shown in the fitment data. Use part number 7047 when matching the correct replacement to the vehicle and exhaust configuration.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Replacement Reasons\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise from a damaged or rusted muffler assembly\u003c\/li\u003e\n\u003cli\u003eVisible corrosion or perforation in the rear exhaust section\u003c\/li\u003e\n\u003cli\u003eExhaust leaks at the muffler body or welded joints\u003c\/li\u003e\n\u003cli\u003eReduced exhaust system integrity on Lexus RX350, RX400h, RX330, or Toyota Highlander models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, make, model, and rear exhaust configuration before ordering AP Exhaust 7047. Because the fitment data lists welded exhaust muffler assembly notes, installation typically requires exhaust system service rather than a simple clamp-on swap. Confirm alignment, hanger locations, and pipe routing against the existing exhaust before final installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7047 uses aluminized steel construction for exhaust service and is cataloged as a rear muffler assembly for the listed Lexus and Toyota applications. Review the vehicle-specific fitment details carefully to confirm the correct replacement before installation.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497452725,"sku":"BBDL-7047","price":111.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7047_Fro.jpg?v=1774704069"},{"product_id":"ap-exhaust-7099-exhaust-muffler-assembly","title":"AP Exhaust 7099 Exhaust Muffler Assembly - Rear","description":"\u003ch2\u003eAP Exhaust 7099 Muffler Assembly for RX300\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7099 is a rear exhaust muffler assembly built for the 1999-2003 Lexus RX300. It uses aluminized steel construction for a practical balance of corrosion resistance and everyday exhaust service life. This welded exhaust muffler assembly is a direct fit for the rear position on the RX300 application listed below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material\u003c\/li\u003e\n\u003cli\u003eWelded exhaust muffler assembly\u003c\/li\u003e\n\u003cli\u003eRear position fitment\u003c\/li\u003e\n\u003cli\u003eBuilt for 1999-2003 Lexus RX300 applications\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7099\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7099 is an exhaust muffler assembly intended for rear installation on the Lexus RX300. The aluminized steel construction is commonly selected for replacement exhaust service because it offers a durable metal finish suited to routine road exposure. For buyers searching for a rear muffler assembly for 1999-2003 Lexus RX300 models, part number 7099 provides a fitment-specific replacement option that matches the listed vehicle range and position.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or corrosion in the rear muffler housing\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a damaged muffler assembly\u003c\/li\u003e\n\u003cli\u003eLeaks at the rear exhaust section\u003c\/li\u003e\n\u003cli\u003eReplacement needs after physical damage to the muffler body\u003c\/li\u003e\n\u003cli\u003eService replacement for worn 1999-2003 Lexus RX300 rear exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 1999-2003 Lexus RX300 with rear muffler application before ordering. This part is listed as a welded exhaust muffler assembly, so installation should be planned around the existing exhaust configuration and attachment points. Confirm the rear exhaust routing and mounting style on the vehicle to ensure the replacement matches the original layout. AP Exhaust 7099 is also a useful search term when comparing a rear muffler assembly for Lexus RX300 exhaust repair.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures exhaust replacement components for vehicle-specific applications, and 7099 is listed with aluminized steel construction for the RX300 rear exhaust position. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497583797,"sku":"BBDL-7099","price":269.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7099_Fro_0a2314e9-846c-417d-8e7b-ba1110268174.jpg?v=1774704070"},{"product_id":"ap-exhaust-7310-exhaust-muffler-assembly","title":"AP Exhaust 7310 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7310 Muffler Assembly for Scion tC\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7310 is a welded exhaust muffler assembly built with aluminized steel for direct replacement service on select Scion tC applications. It is a fitment-based solution for 2005-2010 Scion tC owners looking for an exhaust muffler assembly that matches the vehicle application and mounting style.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for exhaust system service\u003c\/li\u003e\n\u003cli\u003eWelded exhaust muffler assembly construction\u003c\/li\u003e\n\u003cli\u003eDirect fitment for 2005-2010 Scion tC\u003c\/li\u003e\n\u003cli\u003ePosition: N\/A\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7310\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler assembly is engineered for the 2005-2010 Scion tC and is listed as a welded exhaust muffler assembly. The aluminized steel construction is a practical choice for exhaust replacement work where material durability and application-specific fitment matter. AP Exhaust 7310 is a straightforward option for restoring proper exhaust function on the Scion tC platform without changing the vehicle’s original exhaust layout.\u003c\/p\u003e\u003ch2\u003eCommon Issues It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the original muffler assembly\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a damaged muffler\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a failing assembly\u003c\/li\u003e\n\u003cli\u003eReplacement needs after weld failure or structural wear\u003c\/li\u003e\n\u003cli\u003eFitment-specific repair for a worn Scion tC exhaust component\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2005-2010 Scion tC, N\/A. Verify the existing exhaust configuration and mounting points before installation to confirm the welded muffler assembly matches the vehicle’s current setup. Because this part is application-specific, compare the original unit to AP Exhaust 7310 before beginning the repair.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust is a recognized exhaust system brand with application-focused replacement parts for passenger vehicles. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497649333,"sku":"BBDL-7310","price":209.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7310_Fro_f9f55341-e642-4953-8a5f-66fac376c541.jpg?v=1774704070"},{"product_id":"ap-exhaust-7318-exhaust-muffler-assembly","title":"AP Exhaust 7318 Exhaust Muffler Assembly - Left","description":"\u003ch2\u003eAP Exhaust 7318 Left Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7318 is a left exhaust muffler assembly built from aluminized steel for select Nissan Altima applications. It is a direct-fit style replacement for the factory left-side muffler assembly on covered sedan models, with fitment for 2007-2008 and 2009 vehicles noted below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for corrosion resistance in exhaust service\u003c\/li\u003e\n\u003cli\u003eLeft-side exhaust muffler assembly configuration\u003c\/li\u003e\n\u003cli\u003eOE-style replacement for select Nissan Altima sedan applications\u003c\/li\u003e\n\u003cli\u003eCross-reference part number: 20110JA02A\u003c\/li\u003e\n\u003cli\u003ePart number 7318 for ordering and fitment verification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler assembly is intended for the left side of select Nissan Altima exhaust systems. The aluminized steel construction supports long-term exhaust service in a replacement application, while the welded assembly format matches the factory-style layout used on covered sedan models. AP Exhaust 7318 is listed for 2007-2008 Nissan Altima left-side welded assembly applications, as well as 2009 Nissan Altima left-side welded assembly applications built up to 01\/09 and excluding hybrid models. The part number 7318 is also associated with OE reference 20110JA02A for the same application.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2007-2008 Nissan Altima, left. Welded Assembly; Sedan, Up to 01\/09, Exc. Hybrid.\u003c\/li\u003e\n\u003cli\u003eFits 2009 Nissan Altima, left. Welded Assembly; Sedan, Up to 01\/09, Exc. Hybrid; TO 01\/09.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Replacement Reasons\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the original left muffler assembly\u003c\/li\u003e\n\u003cli\u003eExhaust leaks from a damaged welded assembly\u003c\/li\u003e\n\u003cli\u003eExcessive exhaust noise from a failing muffler\u003c\/li\u003e\n\u003cli\u003eFitment issues after collision or underbody damage\u003c\/li\u003e\n\u003cli\u003eNeed for an OE-style replacement on a Nissan Altima exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle build date, body style, and hybrid status before installation. This part is specified for sedan applications up to 01\/09 and excludes hybrid models. Confirm left-side placement and compare the existing assembly to the part number 7318 before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures exhaust replacement components for service applications, and this muffler assembly uses aluminized steel to support durability in exhaust system repair.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497747637,"sku":"BBDL-7318","price":83.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7318_Fro_38a81e81-c604-4584-9643-2cf605d0a7a7.jpg?v=1774704071"},{"product_id":"ap-exhaust-7346-exhaust-muffler-assembly","title":"AP Exhaust 7346 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7346 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7346 is an exhaust muffler assembly built from aluminized steel for a direct-fit replacement on select Chevrolet Aveo sedan applications. It is listed for 2004-2011 Chevrolet Aveo models with welded assembly construction and N\/A position fitment.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for corrosion resistance in exhaust service\u003c\/li\u003e\n\u003cli\u003eExhaust muffler assembly for replacement of the original rear exhaust section\u003c\/li\u003e\n\u003cli\u003eFits 2004-2011 Chevrolet Aveo, N\/A position, sedan\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7346 for application-specific ordering\u003c\/li\u003e\n\u003cli\u003eBuilt for vehicle-specific exhaust fitment on Chevrolet Aveo sedan models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler assembly is intended for Chevrolet Aveo sedan vehicles from 2004 through 2011. The aluminized steel construction provides a practical balance of durability and exhaust-system service life, making AP Exhaust 7346 a straightforward choice when replacing a worn or damaged muffler assembly. If you are searching for a Chevrolet Aveo muffler assembly, AP Exhaust 7346 matches the listed welded assembly configuration for the sedan body style.\u003c\/p\u003e\u003cp\u003eAP Exhaust 7346 is a fitment-specific exhaust component for drivers needing a replacement muffler assembly for 2004-2011 Chevrolet Aveo sedan models. The part number 7346 is useful when confirming the correct exhaust muffler assembly for this application.\u003c\/p\u003e\u003ch2\u003eCommon Replacement Reasons\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the muffler housing\u003c\/li\u003e\n\u003cli\u003eExhaust leaks from a damaged welded assembly\u003c\/li\u003e\n\u003cli\u003eExcessive exhaust noise from a failing muffler\u003c\/li\u003e\n\u003cli\u003eReduced exhaust system integrity on a Chevrolet Aveo sedan\u003c\/li\u003e\n\u003cli\u003eNeed for a direct replacement identified by part number 7346\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle is a 2004-2011 Chevrolet Aveo sedan before ordering. Confirm the existing exhaust layout and welded assembly configuration against the vehicle’s original muffler assembly. Professional exhaust installation is recommended to ensure proper alignment, sealing, and secure mounting.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures exhaust components for vehicle-specific replacement applications. This muffler assembly uses aluminized steel construction to support dependable exhaust service in the listed Chevrolet Aveo fitment.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497845941,"sku":"BBDL-7346","price":137.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7346_Fro_532b8232-542e-49f3-806d-409ccded759d.jpg?v=1774704071"},{"product_id":"ap-exhaust-7450-exhaust-muffler-assembly","title":"AP Exhaust 7450 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7450 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7450 is an exhaust muffler assembly built with aluminized steel for 2001-2004 Nissan Pathfinder and 2001-2003 INFINITI QX4 applications. It is a direct-fit replacement for vehicles with a welded OE exhaust system, making it a practical choice when restoring exhaust function on these platforms.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for corrosion resistance in everyday driving conditions\u003c\/li\u003e\n\u003cli\u003eExhaust muffler assembly for rear exhaust service on the listed applications\u003c\/li\u003e\n\u003cli\u003eFits 2001-2004 Nissan Pathfinder, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2001-2003 INFINITI QX4, N\/A\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7450 for application-specific lookup and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust 7450 muffler assembly is built for vehicles that left the factory with a welded exhaust system. The aluminized steel construction is selected for durability in exhaust service, where heat and road exposure are constant factors. For owners searching for a 2001-2004 Nissan Pathfinder muffler assembly or a 2001-2003 INFINITI QX4 exhaust muffler replacement, this part provides a direct application match for the listed vehicles.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Exhaust Issues It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust leaks from a deteriorated welded assembly\u003c\/li\u003e\n\u003cli\u003eExcessive exhaust noise from a failed muffler\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow caused by internal damage\u003c\/li\u003e\n\u003cli\u003eReplacement needs after factory welded exhaust service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eCompatible With welded OE exhaust systems on the listed Pathfinder and QX4 applications. Because the original system was welded, AP Exhaust recommends replacing all noted parts during service. Verify vehicle year and model before installation, and confirm the existing exhaust layout matches the listed application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures exhaust components for application-specific replacement service. Part number 7450 uses aluminized steel construction to support long-term exhaust system repair on the confirmed fitments.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385497911477,"sku":"BBDL-7450","price":138.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7450_Fro.jpg?v=1774704072"},{"product_id":"ap-exhaust-7451-exhaust-muffler-assembly","title":"AP Exhaust 7451 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7451 Muffler Assembly for Toyota Echo\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7451 is an exhaust muffler assembly built with aluminized steel for service on select Toyota Echo applications. It is listed for 2000-2005 Toyota Echo models with welded assembly construction and excludes hatchback versions.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust muffler assembly for direct-fit replacement use\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction for corrosion resistance in exhaust service\u003c\/li\u003e\n\u003cli\u003eFits 2000-2005 Toyota Echo, N\/A, welded assembly; excludes hatchback\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7451 for catalog matching and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust 7451 muffler assembly is specified for the Toyota Echo across the 2000-2005 model years. The aluminized steel muffler material is commonly used in exhaust components where durability and heat exposure are important, and the welded assembly format supports a factory-style replacement approach. For buyers searching for a 2000 Toyota Echo muffler assembly, 2005 Toyota Echo exhaust muffler, or AP Exhaust 7451 replacement muffler, this listing provides the exact fitment notes needed for selection.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Replacement Reasons\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise from a damaged internal baffle or shell\u003c\/li\u003e\n\u003cli\u003eLeaks at the muffler assembly\u003c\/li\u003e\n\u003cli\u003eFailed emissions-related exhaust sealing at the rear section\u003c\/li\u003e\n\u003cli\u003eNeed for a replacement muffler on a Toyota Echo exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify vehicle year and body style before ordering. This AP Exhaust 7451 application is listed for welded assembly use and excludes hatchback models, so confirm the existing exhaust layout matches the fitment notes. Professional exhaust installation is recommended to ensure proper alignment, sealing, and hanger positioning.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust supplies exhaust components for replacement service, and this muffler assembly uses aluminized steel construction for dependable exhaust-system fitment on listed Toyota Echo applications.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385498042549,"sku":"BBDL-7451","price":164.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7451_Fro.jpg?v=1774704073"},{"product_id":"ap-exhaust-7453-exhaust-muffler-assembly","title":"AP Exhaust 7453 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7453 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7453 is an exhaust muffler assembly built with aluminized steel for corrosion resistance in everyday driving conditions. It is a direct-fit replacement for select Ford Focus hatchback applications and is listed as a welded assembly for the specified vehicles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for durable exhaust service\u003c\/li\u003e\n\u003cli\u003eExhaust muffler assembly for rear exhaust repair and replacement\u003c\/li\u003e\n\u003cli\u003eWelded assembly construction for the listed Ford Focus hatchback applications\u003c\/li\u003e\n\u003cli\u003eFits select 2000-2007 Ford Focus hatchback models\u003c\/li\u003e\n\u003cli\u003ePart number 7453 for application matching and catalog lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2005-2007 Ford Focus, N\/A, Hatchback; welded assembly.\u003c\/li\u003e\n\u003cli\u003eFits 2000-2004 Ford Focus, N\/A, Hatchback; welded assembly; Zetec Engine (Engine Code 3).\u003c\/li\u003e\n\u003cli\u003eFits 2000-2004 Ford Focus, N\/A, Hatchback; welded assembly; SPI Engine (Engine Code P).\u003c\/li\u003e\n\u003cli\u003eFits 2003-2004 Ford Focus, N\/A, Hatchback; welded assembly; 03-04 Hatchback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or corrosion in the original muffler housing\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a damaged or leaking muffler assembly\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a deteriorated rear exhaust section\u003c\/li\u003e\n\u003cli\u003eFitment issues when replacing a welded hatchback muffler assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year, hatchback body style, and engine code before installation. This AP Exhaust 7453 muffler assembly is listed for welded-assembly applications, so confirm the existing exhaust configuration matches the vehicle notes before ordering. Professional exhaust installation is recommended for proper alignment and sealing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust supplies exhaust components for replacement applications, and this muffler assembly uses aluminized steel to support long-term service in the exhaust system. Part number 7453 should be matched to the exact Ford Focus hatchback fitment shown above.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385498075317,"sku":"BBDL-7453","price":238.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7453_Fro.jpg?v=1774704073"},{"product_id":"ap-exhaust-7462-exhaust-muffler-assembly","title":"AP Exhaust 7462 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7462 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7462 is an exhaust muffler assembly built with aluminized steel for service on select Volkswagen Jetta applications. It is listed for 1999-2005 Volkswagen Jetta models with a welded exhaust system, making it a direct-fit replacement for vehicles that match the original OE configuration.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for exhaust system replacement\u003c\/li\u003e\n\u003cli\u003eExhaust muffler assembly for OE-style service\u003c\/li\u003e\n\u003cli\u003eFits 1999-2005 Volkswagen Jetta, N\/A\u003c\/li\u003e\n\u003cli\u003eDesigned for welded assembly applications\u003c\/li\u003e\n\u003cli\u003ePart number 7462 for accurate ordering and lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler assembly is intended for Volkswagen Jetta owners replacing a welded factory exhaust section. The aluminized steel construction is commonly used in exhaust service parts for corrosion resistance in everyday driving conditions. AP Exhaust 7462 is cataloged for 1999, 2000, 2001, 2002, 2003, 2004, and 2005 Volkswagen Jetta models, and the fitment notes indicate the OE system was welded, so replacing all noted parts is recommended when servicing the system.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring a damaged or rusted muffler assembly\u003c\/li\u003e\n\u003cli\u003eReplacing a welded OE exhaust section on a Volkswagen Jetta\u003c\/li\u003e\n\u003cli\u003eAddressing exhaust leaks from a deteriorated muffler body\u003c\/li\u003e\n\u003cli\u003eCorrecting excessive exhaust noise from a failed muffler assembly\u003c\/li\u003e\n\u003cli\u003eServicing a corroded aluminized steel exhaust component\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eFits 1999-2005 Volkswagen Jetta, N\/A. Because the original system was welded, installation typically requires exhaust service procedures suited to welded components. Verify the vehicle’s exhaust layout and match the existing OE configuration before installation. Part number 7462 should be confirmed against the vehicle’s year and exhaust design before ordering.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7462 is an aluminized steel exhaust muffler assembly cataloged for specific Volkswagen Jetta applications. The part number 7462 and vehicle fitment details provide a clear reference for selecting the correct replacement component.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385498108085,"sku":"BBDL-7462","price":288.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7462_Fro.jpg?v=1774704074"},{"product_id":"ap-exhaust-7510-exhaust-muffler-assembly","title":"AP Exhaust 7510 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7510 Muffler Assembly for Honda Element\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7510 is a welded exhaust muffler assembly built with aluminized steel for corrosion resistance and long-term service in the exhaust system. It is a direct fit for select Honda Element applications and is listed for 2003-2011 Honda Element models.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for durable exhaust service\u003c\/li\u003e\n\u003cli\u003eWelded exhaust muffler assembly construction\u003c\/li\u003e\n\u003cli\u003eDirect fit for 2003-2011 Honda Element applications\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7510 for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7510 is an exhaust muffler assembly engineered for the Honda Element platform. The aluminized steel construction helps resist exhaust-system corrosion, while the welded assembly format supports a factory-style replacement for vehicles needing a muffler service part. This part is listed for 2003-2011 Honda Element, N\/A position applications and is a practical choice when replacing a worn or damaged muffler on this model. If you are searching for a Honda Element muffler assembly, AP Exhaust 7510 provides a fitment-specific option for the 2003-2011 range.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise from a damaged or deteriorated muffler\u003c\/li\u003e\n\u003cli\u003eRust-related muffler failure in the exhaust system\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow caused by internal muffler wear\u003c\/li\u003e\n\u003cli\u003eReplacement needs for a welded Honda Element muffler assembly\u003c\/li\u003e\n\u003cli\u003eFitment-specific service for 2003-2011 Honda Element vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify vehicle year and application before ordering. This part is listed as a welded exhaust muffler assembly for 2003-2011 Honda Element, so installation should be matched to the existing exhaust configuration and mounting points. Confirm the exhaust system condition around the muffler area before replacement to avoid rework.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust is an established exhaust-system brand, and part number 7510 is built with aluminized steel for service-focused durability in muffler replacement applications.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385498173621,"sku":"BBDL-7510","price":238.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7510_Fro.jpg?v=1774704074"},{"product_id":"ap-exhaust-7513-exhaust-muffler-assembly","title":"AP Exhaust 7513 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7513 Muffler Assembly for FJ Cruiser\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7513 is a welded exhaust muffler assembly built from aluminized steel for direct replacement service on select Toyota FJ Cruiser applications. It is a fitment-specific exhaust muffler assembly for 2007-2014 Toyota FJ Cruiser models with N\/A position listing, making it a focused option for restoring exhaust function on the correct vehicle platform.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for corrosion resistance in exhaust service\u003c\/li\u003e\n\u003cli\u003eWelded exhaust muffler assembly construction\u003c\/li\u003e\n\u003cli\u003eDirect-fit application for 2007-2014 Toyota FJ Cruiser\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7513 for catalog matching and ordering\u003c\/li\u003e\n\u003cli\u003eBuilt for exhaust system replacement on the specified vehicle fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7513 is an exhaust muffler assembly engineered for the Toyota FJ Cruiser platform from 2007 through 2014. The aluminized steel construction is commonly used in exhaust components to balance durability and cost in underbody service, while the welded assembly format supports a replacement-style installation on the listed application. If you are searching for a Toyota FJ Cruiser muffler assembly, AP Exhaust 7513 provides a fitment-specific solution for the confirmed vehicle range.\u003c\/p\u003e\u003cp\u003eThis part number, 7513, is also useful when cross-checking catalog listings for a Toyota FJ Cruiser exhaust muffler assembly or AP Exhaust 7513 replacement muffler.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDamaged or rusted muffler housing\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a failing muffler assembly\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a deteriorated muffler\u003c\/li\u003e\n\u003cli\u003eReplacement needs for a welded muffler assembly on the FJ Cruiser\u003c\/li\u003e\n\u003cli\u003eFitment matching for 2007-2014 Toyota FJ Cruiser exhaust service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year and model before ordering. This part is listed for 2007-2014 Toyota FJ Cruiser, N\/A position, with notes indicating a welded exhaust muffler assembly. Confirm the existing exhaust layout and mounting configuration on the vehicle before installation. Professional exhaust service is recommended for proper alignment and secure fitment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7513 uses aluminized steel construction for exhaust-system durability in the specified application. Fitment is confirmed for 2007-2014 Toyota FJ Cruiser models, and the part number should be matched carefully to the vehicle listing before installation.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385498206389,"sku":"BBDL-7513","price":187.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7513_Fro.jpg?v=1774704075"},{"product_id":"ap-exhaust-7550-exhaust-muffler-assembly","title":"AP Exhaust 7550 Exhaust Muffler Assembly - Front","description":"\u003ch2\u003eAP Exhaust 7550 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7550 is an exhaust muffler assembly built with aluminized steel for the front exhaust position on select Nissan Murano models. It is a direct-fit replacement for 2003-2007 Nissan Murano front applications with a welded assembly design.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for corrosion resistance in exhaust service\u003c\/li\u003e\n\u003cli\u003eExhaust muffler assembly for front-position fitment\u003c\/li\u003e\n\u003cli\u003eDirect replacement for 2003-2007 Nissan Murano front welded assembly applications\u003c\/li\u003e\n\u003cli\u003ePart number 7550 for catalog and cross-reference lookup\u003c\/li\u003e\n\u003cli\u003eInterchanges with OE reference 20300CC00A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication Details\u003c\/h2\u003e\u003cp\u003eFits 2003-2007 Nissan Murano, front. This AP Exhaust 7550 muffler assembly matches the OE welded assembly layout used on these vehicles, making it a practical replacement when servicing the front section of the exhaust system. It is a fitment-specific solution for Nissan Murano exhaust repair where the original assembly is welded in place.\u003c\/p\u003e\u003cp\u003eThis part cross-references OE number 20300CC00A for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for a rusted or perforated front muffler assembly\u003c\/li\u003e\n\u003cli\u003eRepair for exhaust leaks at the welded assembly section\u003c\/li\u003e\n\u003cli\u003eCorrection for excessive exhaust noise from a damaged muffler\u003c\/li\u003e\n\u003cli\u003eService replacement for OE-style front exhaust wear on Nissan Murano models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eFits 2003-2007 Nissan Murano, front. The OE system was a welded assembly, so replacement may require servicing the noted exhaust sections as a unit rather than swapping only one isolated component. Verify vehicle year and front-position application before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures this muffler assembly with aluminized steel construction for exhaust-system durability and fitment consistency. Part number 7550 is cataloged for the specified Nissan Murano application and OE interchange reference.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385498992821,"sku":"BBDL-7550","price":80.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7550_Fro.jpg?v=1774704076"},{"product_id":"ap-exhaust-7675-exhaust-muffler-assembly","title":"AP Exhaust 7675 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7675 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7675 is an exhaust muffler assembly built from aluminized steel for 2002-2008 Mini Cooper applications. It is a welded assembly that follows the original muffler strap and hanger arrangement, making it a direct-fit replacement for the Mini Cooper exhaust system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for corrosion resistance in exhaust service\u003c\/li\u003e\n\u003cli\u003eWelded assembly construction\u003c\/li\u003e\n\u003cli\u003eFits 2002-2008 Mini Cooper, N\/A\u003c\/li\u003e\n\u003cli\u003eUses the original muffler strap and hangers\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7675\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler assembly is made for the 2002-2008 Mini Cooper and is shaped for the factory exhaust layout. The aluminized steel construction is selected for exhaust durability, while the welded assembly design supports a straightforward replacement of the original muffler section. If you are replacing a worn or damaged Mini Cooper muffler, AP Exhaust 7675 provides a fitment-specific solution for this vehicle range. This part number 7675 is also a useful reference when confirming the correct exhaust muffler assembly for Mini Cooper exhaust repair work.\u003c\/p\u003e\u003ch2\u003eCommon Reasons for Replacement\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise from a leaking muffler assembly\u003c\/li\u003e\n\u003cli\u003eDamage to the original welded muffler section\u003c\/li\u003e\n\u003cli\u003eFailed emissions-related exhaust sealing at the rear section\u003c\/li\u003e\n\u003cli\u003eNeed for a direct replacement on a 2002-2008 Mini Cooper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eFits 2002-2008 Mini Cooper, N\/A. Installation requires removing and re-using the original muffler strap and hangers. Verify the existing exhaust layout and mounting points before installation. AP Exhaust 7675 is a welded assembly, so proper alignment during installation is important for correct exhaust routing and fit.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures exhaust components for replacement service applications, and this muffler assembly uses aluminized steel for the demands of underbody exhaust exposure. Part number 7675 is intended for the listed Mini Cooper fitment only.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385499123893,"sku":"BBDL-7675","price":315.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7675_Fro_0239987f-1af7-4f57-94bf-af3085d40cb4.jpg?v=1774704077"},{"product_id":"ap-exhaust-7678-exhaust-muffler-assembly","title":"AP Exhaust 7678 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7678 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7678 is an exhaust muffler assembly built with aluminized steel for service on select Chrysler and Dodge minivans. It is a welded assembly for vehicles equipped with the Stow and Go option, giving buyers a direct-fit exhaust replacement reference for the correct application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for corrosion resistance in exhaust service\u003c\/li\u003e\n\u003cli\u003eWelded assembly construction\u003c\/li\u003e\n\u003cli\u003eFits 2005-2007 Chrysler Town \u0026amp; Country, N\/A, with Stow and Go option\u003c\/li\u003e\n\u003cli\u003eFits 2005-2007 Dodge Grand Caravan, N\/A, with Stow and Go option\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7678 for application matching and catalog lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis exhaust muffler assembly is specified for 2005-2007 Chrysler Town \u0026amp; Country and 2005-2007 Dodge Grand Caravan models with the Stow and Go option. The aluminized steel construction is selected for exhaust system use where heat and corrosion resistance are important, and the welded assembly format supports a direct replacement approach for the listed vehicles. If you are searching for AP Exhaust 7678 for a Chrysler Town \u0026amp; Country or Dodge Grand Caravan exhaust repair, verify the Stow and Go configuration before ordering.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Addresses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRusted or deteriorated muffler assembly\u003c\/li\u003e\n\u003cli\u003eExhaust noise from a damaged internal muffler structure\u003c\/li\u003e\n\u003cli\u003eLeaks at the muffler body or welded joints\u003c\/li\u003e\n\u003cli\u003eReplacement needs on a Chrysler Town \u0026amp; Country exhaust system\u003c\/li\u003e\n\u003cli\u003eReplacement needs on a Dodge Grand Caravan exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle is a 2005-2007 Chrysler Town \u0026amp; Country or 2005-2007 Dodge Grand Caravan with the Stow and Go option before installation. Match the existing exhaust routing and mounting points to the welded assembly configuration, and inspect adjoining exhaust components for wear, corrosion, or leaks during replacement. AP Exhaust 7678 should be installed as the listed application for proper fitment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures exhaust components for vehicle-specific replacement use, and part number 7678 is cataloged for the confirmed applications above. Review the vehicle fitment details carefully to ensure the correct exhaust muffler assembly is selected for your repair.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385499156661,"sku":"BBDL-7678","price":134.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7678_Fro.jpg?v=1774704077"},{"product_id":"ap-exhaust-7687-exhaust-muffler-assembly","title":"AP Exhaust 7687 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7687 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7687 is an exhaust muffler assembly built with aluminized steel for select Honda and Acura applications. It is listed for welded OE-style systems, making it a direct replacement option for restoring exhaust function on the 2003-2004 Honda Pilot and 2001-2002 Acura MDX.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for corrosion resistance in exhaust service\u003c\/li\u003e\n\u003cli\u003eExhaust muffler assembly for OE-style replacement\u003c\/li\u003e\n\u003cli\u003eFits welded factory exhaust systems\u003c\/li\u003e\n\u003cli\u003eDirect application coverage for 2003-2004 Honda Pilot and 2001-2002 Acura MDX\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7687 for catalog matching and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication Details\u003c\/h2\u003e\u003cp\u003eThis muffler assembly is built for vehicles that used a welded original exhaust layout. Fits 2003-2004 Honda Pilot, N\/A. Fits 2001-2002 Acura MDX, N\/A. If you are searching for AP Exhaust 7687 for a Honda Pilot muffler replacement or an Acura MDX exhaust muffler assembly, this part matches the listed OE-style application.\u003c\/p\u003e\u003cp\u003eThis part cross-references Honda OE numbers 18030S3VA02 and 18030S9VA00 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the original muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a failing muffler assembly\u003c\/li\u003e\n\u003cli\u003eLoss of exhaust sealing in a welded factory system\u003c\/li\u003e\n\u003cli\u003eReplacement needs after damage to the original rear exhaust section\u003c\/li\u003e\n\u003cli\u003eFitment-specific repair for Honda Pilot and Acura MDX exhaust service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s exhaust layout before ordering, since this application is listed as a welded assembly. The OE system was welded, so replacement planning should account for the noted parts in the factory exhaust path. Confirm year, make, and model against the vehicle identification before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust supplies aluminized steel exhaust components for replacement service, and part 7687 is cataloged to match the listed OE applications for the 2001-2002 Acura MDX and 2003-2004 Honda Pilot.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385499254965,"sku":"BBDL-7687","price":156.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7687_Fro_4df2b50c-d03b-42ad-b7bf-a69c9f174bc6.jpg?v=1774704078"},{"product_id":"ap-exhaust-7883-exhaust-muffler-assembly","title":"AP Exhaust 7883 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 7883 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7883 is a welded exhaust muffler assembly built for direct replacement service on select Saturn Vue applications. It uses aluminized steel construction for corrosion resistance and dependable exhaust flow in everyday driving.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for durable exhaust service\u003c\/li\u003e\n\u003cli\u003eWelded exhaust muffler assembly for a direct-fit replacement approach\u003c\/li\u003e\n\u003cli\u003eFits 2004-2007 Saturn Vue, N\/A\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 7883 for application matching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication Details\u003c\/h2\u003e\u003cp\u003eThis muffler assembly is made for the 2004-2007 Saturn Vue and is listed as a welded exhaust muffler assembly. If you are replacing a worn or damaged Saturn Vue muffler, AP Exhaust 7883 provides a vehicle-specific solution for the listed years and configuration.\u003c\/p\u003e\u003ch2\u003eCommon Reasons for Replacement\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise from a rusted or perforated muffler\u003c\/li\u003e\n\u003cli\u003eReduced exhaust sealing due to corrosion\u003c\/li\u003e\n\u003cli\u003eVisible damage to the muffler shell or welded seams\u003c\/li\u003e\n\u003cli\u003eFailed emissions-related exhaust inspection caused by exhaust leaks\u003c\/li\u003e\n\u003cli\u003eRestoring proper exhaust routing on a Saturn Vue\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year and exhaust configuration before ordering. This part is listed for the Saturn Vue with N\/A position notes, so match the existing muffler assembly to the vehicle before installation. Professional exhaust installation is recommended to confirm proper alignment and sealing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 7883 is built with aluminized steel to support long-term exhaust service in a replacement application. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385499320501,"sku":"BBDL-7883","price":120.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_7883_Fro.jpg?v=1774704078"},{"product_id":"ap-exhaust-30022-exhaust-muffler","title":"AP Exhaust 30022 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 30022 Muffler for Armada and QX56\u003c\/h2\u003e\u003cp\u003eAP Exhaust 30022 is an exhaust muffler for select Nissan Armada and INFINITI QX56 applications. It is built for vehicles with a welded OE exhaust assembly, making it a direct-fit replacement choice for service work on the factory exhaust system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust muffler for select full-size SUV applications\u003c\/li\u003e\n\u003cli\u003eFits 2007-2015 Nissan Armada, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2007-2010 INFINITI QX56, N\/A\u003c\/li\u003e\n\u003cli\u003eBoxed: No\u003c\/li\u003e\n\u003cli\u003eCross-reference part number: 20100ZE00B\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 30022\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is intended for vehicles noted with a welded OE system, so replacement planning should account for the factory exhaust layout. For buyers searching for a Nissan Armada muffler replacement or an INFINITI QX56 exhaust muffler, part number 30022 provides a fitment-specific option for the listed model years. The AP Exhaust 30022 is also referenced by OE-style part number 20100ZE00B for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the original muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a damaged muffler\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a failing factory muffler\u003c\/li\u003e\n\u003cli\u003eReplacement needs after service on a welded OE exhaust assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle year and model before ordering. Because the OE system was welded, inspect the surrounding exhaust components and confirm the replacement plan for all parts noted in the vehicle service information. Match the existing exhaust configuration to the listed Armada and QX56 fitment before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures exhaust components for service replacement applications. Part number 30022 is listed for the specified Nissan Armada and INFINITI QX56 fitments and follows the application details provided for this welded-system replacement.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385507414197,"sku":"BBDL-30022","price":79.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_30022_Fro_5c3603ce-247c-492f-9a47-aef4ddf0d010.jpg?v=1774704125"},{"product_id":"ap-exhaust-40005-exhaust-muffler-assembly","title":"AP Exhaust 40005 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 40005 Muffler Assembly for Murano\u003c\/h2\u003e\u003cp\u003eAP Exhaust 40005 is a welded exhaust muffler assembly built with aluminized steel for corrosion resistance and dependable exhaust service. It is a direct fit for select Nissan Murano applications and is a practical replacement when the original muffler is damaged, rusted, or no longer sealing properly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel construction for durable exhaust system service\u003c\/li\u003e\n\u003cli\u003eWelded exhaust muffler assembly design\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for select Nissan Murano models\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 40005 for easy identification\u003c\/li\u003e\n\u003cli\u003eCross-references Monroe Shocks \u0026amp; Struts 201001AA2B for the same application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cp\u003eCompatible With 2009-2014 Nissan Murano, N\/A. This AP Exhaust 40005 muffler assembly matches the listed welded exhaust muffler assembly application for these model years.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or corrosion in the original muffler\u003c\/li\u003e\n\u003cli\u003eExhaust leaks caused by a damaged muffler shell or seam\u003c\/li\u003e\n\u003cli\u003eExcessive exhaust noise from a failing muffler assembly\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from internal muffler deterioration\u003c\/li\u003e\n\u003cli\u003eReplacement needs after impact or underbody damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the existing exhaust layout and mounting points before installation. Because this is a welded muffler assembly, proper alignment and secure exhaust sealing are important for a clean installation. Confirm the vehicle is a 2009-2014 Nissan Murano before ordering AP Exhaust 40005.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures exhaust components for replacement service applications, and the aluminized steel construction supports long-term use in the exhaust system. This part number, 40005, is intended for the listed Murano fitment only.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385511084213,"sku":"BBDL-40005","price":220.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_40005_Fro.jpg?v=1774704135"},{"product_id":"ap-exhaust-60001-exhaust-muffler-assembly","title":"AP Exhaust 60001 Exhaust Muffler Assembly","description":"\u003ch2\u003eAP Exhaust 60001 Muffler Assembly\u003c\/h2\u003e\u003cp\u003eAP Exhaust 60001 is an exhaust muffler assembly built with aluminized steel for service on select full-size Nissan and INFINITI SUVs. It is a direct-fit replacement for welded exhaust applications and supports a clean, OE-style repair for the exhaust system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminized steel muffler material for corrosion resistance in everyday driving conditions\u003c\/li\u003e\n\u003cli\u003eExhaust muffler assembly for welded exhaust service\u003c\/li\u003e\n\u003cli\u003eDirect replacement for select INFINITI QX56 and Nissan Armada applications\u003c\/li\u003e\n\u003cli\u003eCross-references AP Exhaust 60001 for the same application\u003c\/li\u003e\n\u003cli\u003ePart number 60001 for accurate catalog matching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cp\u003eCompatible with 2004-2006 INFINITI QX56, N\/A. Compatible with 2005-2006 Nissan Armada, N\/A. Compatible with 2004 Nissan Pathfinder Armada, N\/A. This AP Exhaust 60001 muffler assembly is listed for welded exhaust muffler assembly applications on these vehicles.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise from a damaged or worn muffler\u003c\/li\u003e\n\u003cli\u003eRust-related deterioration in the muffler shell\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow caused by internal muffler failure\u003c\/li\u003e\n\u003cli\u003eFitment issues when replacing a welded factory muffler assembly\u003c\/li\u003e\n\u003cli\u003eRepair needs on a Nissan Armada, INFINITI QX56, or Pathfinder Armada exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eInstallation is for welded exhaust muffler assembly applications. Verify vehicle year, make, model, and exhaust configuration before installation. Confirm the existing exhaust layout matches the listed fitment for AP Exhaust 60001 and compare the replacement unit to the original muffler assembly before welding in place.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures exhaust components for replacement service, and this muffler assembly uses aluminized steel to support durable exhaust repair on the listed applications.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385517179061,"sku":"BBDL-60001","price":186.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_60001_Fro.jpg?v=1774704162"},{"product_id":"ap-exhaust-700018-exhaust-muffler","title":"AP Exhaust 700018 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700018 Muffler for Honda Accord\u003c\/h2\u003e\u003cp\u003eThe AP Exhaust 700018 is a direct-fit exhaust muffler for 1990-1993 Honda Accord applications. Built with an aluminized steel body and an oval baffled design, it is specified for OE-comparable sound levels and a factory-style replacement profile.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number 700018 from AP Exhaust\u003c\/li\u003e\n\u003cli\u003eFits 1990-1993 Honda Accord, N\/A\u003c\/li\u003e\n\u003cli\u003eOval muffler body with baffled internal configuration\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction for everyday exhaust service\u003c\/li\u003e\n\u003cli\u003eCenter lower inlet and left upper outlet layout\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level for a factory-style exhaust note\u003c\/li\u003e\n\u003cli\u003eMSL series muffler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700018 is an exhaust muffler engineered for 1990-1993 Honda Accord vehicles with direct-fit MSL\/Maximum muffler application notes. The oval body measures 16 inches long, 9 inches wide, and 7 inches high, with an overall length of 26.5 inches. It uses a 1.88-inch inlet inside diameter, a 1.75-inch outlet outside diameter, and a pipe-style inlet with a spout-style outlet. The baffled muffler design supports a controlled exhaust tone while maintaining an OE comparable sound level. If you are searching for a Honda Accord muffler replacement, AP Exhaust 700018 provides a fitment-specific option for these model years.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Muffler Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or corrosion in the original muffler body\u003c\/li\u003e\n\u003cli\u003eExcessive exhaust noise from a failing muffler\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow caused by internal muffler damage\u003c\/li\u003e\n\u003cli\u003eFactory exhaust tone loss on a 1990-1993 Honda Accord\u003c\/li\u003e\n\u003cli\u003eReplacement needs for a worn direct-fit MSL\/Maximum muffler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation before installation, since this muffler uses a center lower inlet and left upper outlet layout. Confirm the vehicle is a 1990-1993 Honda Accord with the direct-fit MSL\/Maximum muffler application noted in the fitment data. Compare the existing muffler dimensions and pipe sizes to the listed specifications before beginning installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures this muffler with aluminized steel construction and OE comparable sound characteristics for a practical replacement on the listed Honda Accord applications. Part number 700018 is built to match the specified fitment and exhaust layout for those model years.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537036469,"sku":"BBDL-700018","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700018_Fro.jpg?v=1774704299"},{"product_id":"ap-exhaust-700046-exhaust-muffler","title":"AP Exhaust 700046 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700046 Muffler for Ford F-250 and F-350\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700046 is a direct-fit exhaust muffler for select Ford F-250 and Ford F-350 applications. It uses an oval, baffled design with OE-comparable sound level to support factory-style exhaust performance on compatible trucks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700046\u003c\/li\u003e\n\u003cli\u003eAP Exhaust MSL series muffler\u003c\/li\u003e\n\u003cli\u003eOval muffler body with baffled internal construction\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for corrosion resistance in everyday use\u003c\/li\u003e\n\u003cli\u003e2.5-inch inlet and 2.5-inch outlet\u003c\/li\u003e\n\u003cli\u003eInlet location: right center; outlet location: center\u003c\/li\u003e\n\u003cli\u003eOverall length: 34 inches; body length: 30 inches\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level\u003c\/li\u003e\n\u003cli\u003eDirect fit MSL\/Maximum muffler application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eBuilt for select Ford truck exhaust systems, AP Exhaust 700046 is an aluminized steel muffler with a 4.06-inch body height, 10.5-inch body width, and oval shape for a factory-style fit. The baffled muffler design and OE-comparable sound level make it a practical choice for drivers who want a replacement muffler that maintains a familiar exhaust tone without changing the vehicle’s basic exhaust layout. This AP Exhaust 700046 muffler is listed for 1985 Ford F-250 and F-350 from 2-85, 1986-1994 Ford F-250 and F-350, and 1996 Ford F-250.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1985 Ford F-250, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; From 2-85\u003c\/li\u003e\n\u003cli\u003eFits 1985 Ford F-350, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; From 2-85\u003c\/li\u003e\n\u003cli\u003eFits 1986-1994 Ford F-250, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1986-1994 Ford F-350, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1996 Ford F-250, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a worn or rusted muffler on a Ford F-250 or Ford F-350\u003c\/li\u003e\n\u003cli\u003eRestoring exhaust tone to OE-comparable sound levels\u003c\/li\u003e\n\u003cli\u003eAddressing exhaust noise caused by internal muffler wear\u003c\/li\u003e\n\u003cli\u003eCorrecting fitment issues from a damaged or mismatched replacement muffler\u003c\/li\u003e\n\u003cli\u003eMaintaining a direct-fit exhaust layout on compatible Ford trucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation before installation: this muffler uses a single 2.5-inch pipe inlet at the right center and a single 2.5-inch pipe outlet at the center. Confirm vehicle year and application details against the listed Ford F-250 and Ford F-350 fitments before ordering. Professional exhaust installation is recommended for proper alignment and sealing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700046 is part of the MSL series and is built with aluminized steel for standard exhaust replacement use. The direct-fit configuration supports straightforward replacement on the listed Ford truck applications.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537102005,"sku":"BBDL-700046","price":75.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700046_Fro_03bcfec0-4b1b-4a58-89c7-b77a75e05bd7.jpg?v=1774704300"},{"product_id":"ap-exhaust-700098-exhaust-muffler","title":"AP Exhaust 700098 Exhaust Muffler - Left or Right","description":"\u003ch2\u003eAP Exhaust 700098 Muffler Overview\u003c\/h2\u003e\u003cp\u003eThe AP Exhaust 700098 is a direct-fit exhaust muffler built for select Ford, Mercury, Lincoln, Pontiac, and Toyota applications. It uses an oval, baffled design with aluminized steel construction and OE-comparable sound level for a factory-style exhaust tone.\u003c\/p\u003e\u003cp\u003eWith a 2-inch inlet and 2-inch outlet in a pipe-style configuration, this AP Exhaust muffler is suited for replacement work on vehicles such as the Ford Taurus, Mercury Sable, and Lincoln Continental. Part number 700098 is part of the MSL series and is shaped for underbody packaging where an oval muffler profile is required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number 700098 from AP Exhaust\u003c\/li\u003e\n\u003cli\u003eOval muffler body with baffled internal design\u003c\/li\u003e\n\u003cli\u003eAluminized steel body material for corrosion resistance in exhaust service\u003c\/li\u003e\n\u003cli\u003e2-inch inlet and 2-inch outlet, pipe type\u003c\/li\u003e\n\u003cli\u003eRight-center inlet and left-center outlet layout\u003c\/li\u003e\n\u003cli\u003eOE-comparable sound level for a factory-style exhaust note\u003c\/li\u003e\n\u003cli\u003eMSL series direct-fit muffler for listed applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700098 is an exhaust muffler designed for direct replacement in vehicles that use an oval, baffled muffler with a 2-inch inlet and outlet. Its 18-inch body length, 10.5-inch body width, and 4.06-inch body height support fitment in applications where space and routing are already defined by the original exhaust system. The overall length measures 21.75 inches.\u003c\/p\u003e\u003cp\u003eThis muffler is listed for 2003-2008 Pontiac Vibe and 2003-2008 Toyota Matrix direct-fit MSL\/Maximum muffler applications, along with multiple Ford Taurus, Mercury Sable, and Lincoln Continental configurations. It is also listed for single-exhaust and dual-exhaust setups on specific Taurus and Continental models, including left and right positions where required. Part number 700098 is a practical replacement choice when restoring exhaust flow and maintaining a stock-like sound profile.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2003-2008 Pontiac Vibe, N\/A.\u003c\/li\u003e\n\u003cli\u003eFits 2003-2008 Toyota Matrix, N\/A. OE system was a welded assembly; replace all parts noted [1] as recommended.\u003c\/li\u003e\n\u003cli\u003eFits 1989-1995 Ford Taurus, N\/A.\u003c\/li\u003e\n\u003cli\u003eFits 1993-1995 Ford Taurus, left.\u003c\/li\u003e\n\u003cli\u003eFits 1993-1995 Ford Taurus, right.\u003c\/li\u003e\n\u003cli\u003eFits 1986-1995 Mercury Sable, N\/A.\u003c\/li\u003e\n\u003cli\u003eFits 1993-1994 Lincoln Continental, left.\u003c\/li\u003e\n\u003cli\u003eFits 1991 Lincoln Continental, left.\u003c\/li\u003e\n\u003cli\u003eFits 1993-1994 Lincoln Continental, right.\u003c\/li\u003e\n\u003cli\u003eFits 1991 Lincoln Continental, right.\u003c\/li\u003e\n\u003cli\u003eFits 1993 Ford Taurus, N\/A, except California.\u003c\/li\u003e\n\u003cli\u003eFits 1993 Mercury Sable, N\/A, except California.\u003c\/li\u003e\n\u003cli\u003eFits 1991-1992 Ford Taurus, left, Police Car, dual exhaust.\u003c\/li\u003e\n\u003cli\u003eFits 1991-1992 Ford Taurus, right, Police Car, dual exhaust.\u003c\/li\u003e\n\u003cli\u003eFits 1992 Ford Taurus, left, dual exhaust from May 1991.\u003c\/li\u003e\n\u003cli\u003eFits 1992 Ford Taurus, right, dual exhaust from May 1991.\u003c\/li\u003e\n\u003cli\u003eFits 1992 Lincoln Continental, left, dual exhaust before 2\/92.\u003c\/li\u003e\n\u003cli\u003eFits 1992 Lincoln Continental, right, dual exhaust before 2\/92.\u003c\/li\u003e\n\u003cli\u003eFits 1992 Lincoln Continental, left, dual exhaust from 2\/92.\u003c\/li\u003e\n\u003cli\u003eFits 1992 Lincoln Continental, right, dual exhaust from 2\/92.\u003c\/li\u003e\n\u003cli\u003eFits 1991 Ford Taurus, left, dual exhaust before May 1991.\u003c\/li\u003e\n\u003cli\u003eFits 1991 Ford Taurus, right, dual exhaust before May 1991.\u003c\/li\u003e\n\u003cli\u003eFits 1991 Ford Taurus, left, dual exhaust from May 1991.\u003c\/li\u003e\n\u003cli\u003eFits 1991 Ford Taurus, right, dual exhaust from May 1991.\u003c\/li\u003e\n\u003cli\u003eFits 1986-1990 Ford Taurus, N\/A.\u003c\/li\u003e\n\u003cli\u003eFits 1989-1990 Ford Taurus, left, dual exhaust before May 1991.\u003c\/li\u003e\n\u003cli\u003eFits 1989-1990 Ford Taurus, right, dual exhaust before May 1991.\u003c\/li\u003e\n\u003cli\u003eFits 1990 Lincoln Continental, N\/A, before 12\/89.\u003c\/li\u003e\n\u003cli\u003eFits 1990 Lincoln Continental, N\/A, from 12\/89.\u003c\/li\u003e\n\u003cli\u003eFits 1988-1989 Lincoln Continental, N\/A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm inlet and outlet orientation before installation: right-center inlet and left-center outlet. This muffler is not tunable and does not include a heat shield. For Toyota Matrix applications, review the welded-assembly note and replace the related exhaust parts identified for the vehicle.\u003c\/p\u003e\u003cp\u003eUse the vehicle’s exhaust routing, position, and model-year notes to verify the correct application before removal of the original muffler. For Ford Taurus and Lincoln Continental dual-exhaust listings, match the left or right side exactly to the vehicle configuration.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for direct-fit service applications. The 700098 muffler is built with aluminized steel and an OE-comparable sound level to support a factory-style replacement on the listed vehicles.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537134773,"sku":"BBDL-700098","price":53.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700098_Fro_82bdcf40-4b49-461b-832a-420b0ffb6003.jpg?v=1774704300"},{"product_id":"ap-exhaust-700126-exhaust-muffler","title":"AP Exhaust 700126 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700126 Muffler Overview\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700126 is an aluminized steel exhaust muffler built in an oval, baffled configuration with OE-comparable sound output. It uses a 3-inch inlet and 3-inch outlet, making it a direct-fit style option for select Chevrolet and GMC full-size trucks and vans from 1988-1995.\u003c\/p\u003e\u003cp\u003eFor shoppers searching for a replacement muffler for a Chevrolet C2500, GMC K2500, or similar GM truck application, AP Exhaust 700126 provides the dimensions and pipe layout needed for listed direct-fit installations.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700126\u003c\/li\u003e\n\u003cli\u003eAP Exhaust MSL series muffler\u003c\/li\u003e\n\u003cli\u003eOval baffled muffler design\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for exhaust system durability\u003c\/li\u003e\n\u003cli\u003e3-inch inlet and 3-inch outlet pipe connections\u003c\/li\u003e\n\u003cli\u003eRight-center inlet with center outlet layout\u003c\/li\u003e\n\u003cli\u003eOE-comparable sound level\u003c\/li\u003e\n\u003cli\u003eNo heat shield attached\u003c\/li\u003e\n\u003cli\u003eOverall length: 26.5 inches\u003c\/li\u003e\n\u003cli\u003eBody dimensions: 22 inches long, 10.5 inches wide, 4.06 inches high\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700126 is a regular-grade exhaust muffler from the MSL series, shaped as an oval unit with a baffled internal design to maintain an OE-comparable exhaust tone. The aluminized steel construction supports everyday service use in truck and van exhaust systems, while the 3-inch pipe inlet and outlet sizing match the listed applications. This muffler is listed for direct-fit use on select 1988-1995 Chevrolet and GMC C1500, C2500, C3500, K1500, K2500, K3500, G10, G20, G30, G1500, G2500, and G3500 vehicles, including many single-tailpipe configurations.\u003c\/p\u003e\u003cp\u003eThis part number, 700126, is a practical replacement choice when the goal is to restore factory-style exhaust routing and sound on compatible Chevrolet and GMC applications without changing the overall exhaust character.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Muffler Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or case failure in the original muffler\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a damaged internal baffle\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a deteriorated muffler body\u003c\/li\u003e\n\u003cli\u003eNeed to restore a factory-style exhaust tone\u003c\/li\u003e\n\u003cli\u003eReplacement for worn mufflers on listed Chevrolet and GMC truck or van applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation before installation: this muffler uses a right-center inlet and center outlet layout. Confirm vehicle-specific notes such as single tailpipe option, closed coupled exhaust exclusions, and gross vehicle weight rating requirements before ordering. Fitment includes direct applications such as Fits 1991-1995 Chevrolet C2500, N\/A; Fits 1988-1993 Chevrolet C1500, N\/A; and Fits 1988-1993 GMC K2500, N\/A, with additional listed coverage for Chevrolet and GMC C\/K trucks and G-series vans.\u003c\/p\u003e\u003cp\u003eBecause this is a pipe-style muffler with no heat shield attached, inspect surrounding exhaust hangers, clamps, and pipe condition during service to ensure proper alignment and sealing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for service applications, and this muffler is built to match the listed dimensions, pipe sizes, and sound characteristics for the specified vehicles. This part cross-references no additional part numbers in the provided data.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537200309,"sku":"BBDL-700126","price":67.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700126_Fro.jpg?v=1774704301"},{"product_id":"ap-exhaust-700152-exhaust-muffler","title":"AP Exhaust 700152 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700152 Muffler for Toyota Applications\u003c\/h2\u003e\u003cp\u003eThe AP Exhaust 700152 is a direct-fit exhaust muffler built for select Toyota trucks and SUVs with OE-style routing. It uses a baffled, round aluminized steel body to match factory exhaust layout and sound levels while supporting a clean replacement on Tacoma, T100, 4Runner, and Pickup applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number 700152 from AP Exhaust\u003c\/li\u003e\n\u003cli\u003eRound muffler with a 7-inch body diameter and 20-inch body length\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction for everyday exhaust service\u003c\/li\u003e\n\u003cli\u003eBaffled 180° muffler configuration\u003c\/li\u003e\n\u003cli\u003eCenter upper 2-inch inlet and center lower 2-inch outlet\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level for factory-style exhaust tone\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for select Toyota Tacoma, T100, 4Runner, and Pickup models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700152 is an OE-style exhaust muffler designed around factory fitment requirements for select Toyota vehicles. The center upper inlet, center lower outlet, and 180° baffled configuration support the original exhaust path used on many Tacoma, T100, 4Runner, and Pickup systems. With a round aluminized steel body and regular-grade construction, this muffler is built for straightforward replacement service where the original system was welded in place.\u003c\/p\u003e\u003cp\u003eThis part number 700152 is listed for 1988-2004 Toyota 4Runner, 1988-2004 Toyota Pickup, 1994-1998 Toyota T100, and 1995-2004 Toyota Tacoma applications, including select Federal and California emissions configurations noted in the fitment data. For buyers searching for a Toyota Tacoma muffler replacement or a direct-fit Toyota Pickup exhaust muffler, AP Exhaust 700152 provides a factory-style layout and OE comparable sound level.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or corrosion in the original muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise that has increased beyond factory levels\u003c\/li\u003e\n\u003cli\u003eDamaged or failing baffled muffler internals\u003c\/li\u003e\n\u003cli\u003eReplacement needs on welded OE exhaust assemblies\u003c\/li\u003e\n\u003cli\u003eRestoration of proper exhaust routing on select Toyota trucks and SUVs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eReview the vehicle-specific notes before ordering, especially for Tacoma, Pickup, and T100 models with Federal or California emissions requirements. Because the OE system was a welded assembly on several listed applications, related exhaust parts noted in the fitment comments should be inspected and replaced as needed during service. Confirm inlet and outlet orientation, center upper inlet, and center lower outlet alignment before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700152 is built as a direct-fit muffler for the listed Toyota applications and uses aluminized steel construction for standard exhaust replacement service. This part cross-references no additional part numbers in the provided data.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537331381,"sku":"BBDL-700152","price":61.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700152_Fro.jpg?v=1774704301"},{"product_id":"ap-exhaust-700159-exhaust-muffler","title":"AP Exhaust 700159 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700159 Muffler for Escort and Tracer\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700159 is a round, baffled exhaust muffler built with aluminized steel for direct-fit service on select Ford Escort and Mercury Tracer applications. It is an OE-comparable sound-level muffler with a center upper inlet and right lower outlet layout for the listed vehicles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700159\u003c\/li\u003e\n\u003cli\u003eAP Exhaust MSL series muffler\u003c\/li\u003e\n\u003cli\u003eRound body design\u003c\/li\u003e\n\u003cli\u003eAluminized steel body material\u003c\/li\u003e\n\u003cli\u003eBaffled muffler construction\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level\u003c\/li\u003e\n\u003cli\u003eCenter upper 1.88 in. inlet pipe\u003c\/li\u003e\n\u003cli\u003eRight lower 1.75 in. outlet pipe\u003c\/li\u003e\n\u003cli\u003eOverall length: 19.5 in.\u003c\/li\u003e\n\u003cli\u003eBody diameter: 7 in.; body length: 15 in.\u003c\/li\u003e\n\u003cli\u003eCompatible with 1991-2003 Ford Escort and 1991-1999 Mercury Tracer direct-fit MSL\/Maximum muffler applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700159 is engineered as a direct-fit exhaust muffler for 1991-2003 Ford Escort and 1991-1999 Mercury Tracer models listed in the fitment data. The muffler uses a baffled internal design and an aluminized steel body to support replacement service where a factory-style exhaust tone and routing are required. Its round shape, center upper inlet, and right lower outlet match the specified vehicle configuration, making it a practical choice for Escort and Tracer exhaust repair or replacement. The AP Exhaust 700159 part number is also useful when searching for a direct-fit MSL\/Maximum muffler for these applications.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise from a worn or rusted muffler\u003c\/li\u003e\n\u003cli\u003eLoss of factory-style exhaust tone\u003c\/li\u003e\n\u003cli\u003eCorrosion-related muffler failure\u003c\/li\u003e\n\u003cli\u003eDamaged inlet or outlet pipe sections at the muffler\u003c\/li\u003e\n\u003cli\u003eReplacement needs on direct-fit Ford Escort and Mercury Tracer exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the inlet and outlet locations, pipe diameters, and overall muffler dimensions before installation. This muffler uses a pipe-style inlet and outlet, so the existing exhaust routing must match the listed center upper inlet and right lower outlet configuration. Confirm vehicle year, make, and model against the fitment data for 1991-2003 Ford Escort and 1991-1999 Mercury Tracer applications. Part number 700159 should be matched to the exhaust layout before final installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700159 is a regular-grade replacement muffler in the AP Exhaust MSL series, built for direct-fit service on the listed Escort and Tracer applications. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537396917,"sku":"BBDL-700159","price":56.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700159_Fro.jpg?v=1774704302"},{"product_id":"ap-exhaust-700182-exhaust-muffler","title":"AP Exhaust 700182 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700182 Muffler Overview\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700182 is an aluminized steel exhaust muffler built in an oval, baffled configuration with OE-comparable sound output. It uses a 2.25-inch inlet and 2.25-inch outlet, making it a direct-fit replacement for select Chevrolet S10, GMC Sonoma, and Isuzu Hombre applications.\u003c\/p\u003e\u003cp\u003eFor shoppers searching for a Chevrolet S10 muffler, GMC Sonoma muffler, or Isuzu Hombre exhaust muffler, this AP Exhaust 700182 part is sized for direct-fit service on the listed vehicles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700182\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for everyday exhaust service\u003c\/li\u003e\n\u003cli\u003eOval muffler shape with baffled internal design\u003c\/li\u003e\n\u003cli\u003e2.25-inch inlet and 2.25-inch outlet pipe connections\u003c\/li\u003e\n\u003cli\u003eRight-center inlet and center outlet layout\u003c\/li\u003e\n\u003cli\u003eOE-comparable sound level for a factory-style exhaust note\u003c\/li\u003e\n\u003cli\u003eDirect-fit MSL\/Maximum muffler application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is part of the MSL series and measures 20 inches in body length, 24 inches overall, with a 10.5-inch body width and 4.06-inch body height. The baffled construction is intended to maintain a controlled exhaust tone while supporting replacement needs on 1995-2003 Chevrolet S10, 1995-2003 GMC Sonoma, and 1996-2000 Isuzu Hombre models. If you are replacing a worn factory muffler on a Chevrolet S10 or GMC Sonoma, AP Exhaust 700182 provides the correct pipe size and layout for the listed direct-fit applications.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Muffler Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise caused by a damaged or rusted muffler\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a deteriorated internal baffle\u003c\/li\u003e\n\u003cli\u003eFactory exhaust tone that has become louder over time\u003c\/li\u003e\n\u003cli\u003eCorrosion-related failure in the original muffler body\u003c\/li\u003e\n\u003cli\u003eFitment problems when replacing a worn direct-fit OE-style muffler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the inlet and outlet orientation before installation: this muffler uses a right-center inlet and center outlet with 2.25-inch pipe connections. Confirm clearance for the oval body dimensions and compare the existing exhaust routing on your Chevrolet S10, GMC Sonoma, or Isuzu Hombre before final fitment. Professional exhaust installation is recommended for proper alignment and sealing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures this muffler as a regular-grade replacement part for direct-fit service on the listed applications. The MSL series is built to match OE-comparable sound characteristics while using aluminized steel construction for standard exhaust replacement needs.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537659061,"sku":"BBDL-700182","price":60.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700182_Fro.jpg?v=1774704303"},{"product_id":"ap-exhaust-700190-exhaust-muffler","title":"AP Exhaust 700190 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700190 Muffler for Jeep Wrangler\u003c\/h2\u003e\u003cp\u003eThe AP Exhaust 700190 is a direct-fit exhaust muffler for 1993-1995 Jeep Wrangler applications. Built with an aluminized steel body and an oval, baffled design, it is specified for OE comparable sound levels and factory-style exhaust routing.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit exhaust muffler for 1993-1995 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 700190\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for everyday exhaust service\u003c\/li\u003e\n\u003cli\u003eOval muffler shape with D configuration\u003c\/li\u003e\n\u003cli\u003eBaffled muffler design with OE comparable sound level\u003c\/li\u003e\n\u003cli\u003eSingle 2.25-inch inlet and single 2.25-inch outlet\u003c\/li\u003e\n\u003cli\u003eCenter upper inlet and right center outlet layout\u003c\/li\u003e\n\u003cli\u003eMSL series muffler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700190 is an exhaust muffler engineered for Jeep Wrangler owners who need a direct-fit replacement that follows the original exhaust path. The muffler uses a 15-inch body length, 18.5-inch overall length, and an oval aluminized steel shell to match common OE-style packaging requirements. Its baffled internal construction is paired with an OE comparable sound level, making it a practical choice for restoring exhaust function without changing the vehicle’s expected tone. If you are searching for a 1993-1995 Jeep Wrangler muffler replacement, AP Exhaust 700190 provides the fitment and dimensions needed for a straightforward service job.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Muffler Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or corrosion in the original muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a damaged internal muffler structure\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a worn or failing muffler\u003c\/li\u003e\n\u003cli\u003eFactory exhaust replacement needs on a 1993-1995 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003eRestoring OE-style exhaust routing after muffler replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet placement before installation: this muffler uses a center upper 2.25-inch inlet and a right center 2.25-inch outlet. Confirm the vehicle’s exhaust pipe condition, hanger alignment, and available clearance for the oval body dimensions. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures this muffler as a regular-grade replacement part for direct-fit service on listed Jeep Wrangler applications. The aluminized steel construction and OE comparable sound profile support a factory-style repair approach for 1993-1995 Jeep Wrangler exhaust maintenance.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537691829,"sku":"BBDL-700190","price":54.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700190_Fro.jpg?v=1774704304"},{"product_id":"ap-exhaust-700195-exhaust-muffler","title":"AP Exhaust 700195 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700195 Muffler for Dodge B-Series Vans\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700195 is a direct-fit exhaust muffler for select 1994-1997 Dodge B-Series vans. It uses an aluminized steel oval body with a baffled configuration and OE-comparable sound level for a factory-style exhaust replacement.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number 700195 from AP Exhaust\u003c\/li\u003e\n\u003cli\u003eDirect-fit muffler for select Dodge B150, B250, B350, B1500, B2500, and B3500 applications\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for everyday exhaust service\u003c\/li\u003e\n\u003cli\u003eOval muffler shape with baffled internal design\u003c\/li\u003e\n\u003cli\u003e2.5-inch center lower inlet and 2.5-inch right center outlet\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level\u003c\/li\u003e\n\u003cli\u003eMSL series muffler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is built for 1994-1997 Dodge B-Series vans that require a direct-fit replacement in the exhaust system. The 26-inch body length, 7-inch body height, and 9-inch body width support a compact oval layout, while the 31-inch overall length and pipe-style inlet and outlet help match the original routing on the listed vehicles. AP Exhaust 700195 is a practical choice for restoring exhaust function on Dodge B150, B250, B350, B1500, B2500, and B3500 models without changing the factory-style sound profile.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1995-1997 Dodge B1500, N\/A - DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1995-1997 Dodge B2500, N\/A - DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1995-1997 Dodge B3500, N\/A - DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1994 Dodge B150, N\/A - DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1994 Dodge B150, N\/A - DIRECT FIT MSL\/MAXIMUM Muffler; from 7-93\u003c\/li\u003e\n\u003cli\u003eFits 1994 Dodge B250, N\/A - DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1994 Dodge B250, N\/A - DIRECT FIT MSL\/MAXIMUM Muffler; from 7-93\u003c\/li\u003e\n\u003cli\u003eFits 1994 Dodge B350, N\/A - DIRECT FIT MSL\/MAXIMUM Muffler; from 7-93\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Replacement Reasons\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the original muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise that has become louder than OE levels\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a damaged internal baffle\u003c\/li\u003e\n\u003cli\u003eNeed for a direct-fit replacement on a Dodge B-Series van\u003c\/li\u003e\n\u003cli\u003eRepairing a leaking or failing factory-style muffler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet location, diameter, and overall length against the existing exhaust before installation. This muffler uses a 2.5-inch center lower inlet and a 2.5-inch right center outlet, so alignment with the original pipe routing is important for proper fitment on the listed Dodge B-Series applications. Professional exhaust installation is recommended for accurate positioning and sealing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for direct-fit service applications, and this muffler is built with aluminized steel construction and an OE-comparable sound level for factory-style replacement use. Part number 700195 is intended for the listed 1994-1997 Dodge B-Series fitments.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537724597,"sku":"BBDL-700195","price":72.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700195_Fro.jpg?v=1774704304"},{"product_id":"ap-exhaust-700226-exhaust-muffler","title":"AP Exhaust 700226 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700226 Muffler for Ram Trucks\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700226 is a direct-fit exhaust muffler for select 1994-1997 Dodge Ram 1500 and 1994-1997 Dodge Ram 2500 applications. Built with an aluminized steel body and an OE-comparable sound level, it is sized for factory-style replacement where a 2.5-inch inlet and outlet are required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: AP Exhaust\u003c\/li\u003e\n\u003cli\u003ePart number: 700226\u003c\/li\u003e\n\u003cli\u003eSeries: MSL\u003c\/li\u003e\n\u003cli\u003eBody material: aluminized steel\u003c\/li\u003e\n\u003cli\u003eOval, baffled muffler design\u003c\/li\u003e\n\u003cli\u003e2.5-inch inlet and 2.5-inch outlet\u003c\/li\u003e\n\u003cli\u003eCenter lower inlet and right center outlet layout\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level\u003c\/li\u003e\n\u003cli\u003eOverall length: 21 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1994-1997 Dodge Ram 1500, N\/A, DIRECT FIT MSL\/MAXIMUM Muffler.\u003c\/li\u003e\n\u003cli\u003eFits 1994-1997 Dodge Ram 1500, N\/A, DIRECT FIT MSL\/MAXIMUM Muffler; under 8800 lbs. G.V.W.\u003c\/li\u003e\n\u003cli\u003eFits 1994-1997 Dodge Ram 2500, N\/A, DIRECT FIT MSL\/MAXIMUM Muffler.\u003c\/li\u003e\n\u003cli\u003eFits 1995-1997 Dodge Ram 2500, N\/A, DIRECT FIT MSL\/MAXIMUM Muffler; under 8800 lbs. G.V.W.\u003c\/li\u003e\n\u003cli\u003eFits 1994 Dodge Ram 2500, N\/A, DIRECT FIT MSL\/MAXIMUM Muffler; after 9-27-93.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is intended for drivers replacing a worn factory-style unit on Dodge Ram 1500 and Dodge Ram 2500 trucks. The baffled oval construction supports a controlled exhaust tone, while the aluminized steel body provides a practical balance of durability and value for everyday service. AP Exhaust 700226 is a straightforward choice when the vehicle calls for a direct-fit MSL\/Maximum muffler with 2.5-inch pipe connections.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise from a damaged or deteriorated muffler\u003c\/li\u003e\n\u003cli\u003eRust-related muffler failure on an existing exhaust system\u003c\/li\u003e\n\u003cli\u003eFactory exhaust tone that has become louder over time\u003c\/li\u003e\n\u003cli\u003eFitment issues when replacing a direct-fit MSL\/Maximum muffler\u003c\/li\u003e\n\u003cli\u003eLoss of proper exhaust routing at the inlet and outlet connection points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s year, model, and gross vehicle weight rating before ordering, since some Ram 1500 and Ram 2500 applications are limited by GVW or production date. Confirm the inlet and outlet orientation, along with the 2.5-inch pipe size, to match the existing exhaust layout. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700226 is a regular-grade replacement muffler in the MSL series, built to match direct-fit service requirements for select Dodge Ram trucks. The aluminized steel construction and OE-comparable sound profile make it a practical replacement option for factory-style exhaust repair.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537757365,"sku":"BBDL-700226","price":57.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700226_Fro.jpg?v=1774704305"},{"product_id":"ap-exhaust-700227-exhaust-muffler","title":"AP Exhaust 700227 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700227 Muffler for Dakota\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700227 is a direct-fit exhaust muffler built for 1994-1996 Dodge Dakota applications, including Sport Package and non-Sport Package coverage as listed below. It uses an aluminized steel body with an oval shape and baffled construction to deliver OE-comparable sound control for a factory-style exhaust repair.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit exhaust muffler for select Dodge Dakota models\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 700227\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for everyday corrosion resistance\u003c\/li\u003e\n\u003cli\u003eOval muffler design with baffled internal construction\u003c\/li\u003e\n\u003cli\u003e2.5-inch inlet and 2.5-inch outlet pipe connections\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level for a factory-style exhaust tone\u003c\/li\u003e\n\u003cli\u003eCenter lower inlet and right center outlet layout\u003c\/li\u003e\n\u003cli\u003eMSL series muffler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700227 is an exhaust muffler designed for direct replacement on select Dodge Dakota trucks. The muffler measures 14 inches long with a 19.5-inch overall length, 9 inches wide, and 7 inches high, giving it the proportions needed for the listed factory applications. Its baffled, oval-body design supports controlled exhaust flow and an OE comparable sound level, making it a practical choice for restoring a worn or damaged muffler on a Dodge Dakota.\u003c\/p\u003e\u003cp\u003eThis AP Exhaust muffler uses a 2.5-inch pipe inlet at the center lower location and a 2.5-inch pipe outlet at the right center location. The aluminized steel construction and regular-grade build make AP Exhaust 700227 a straightforward replacement option for drivers looking to maintain original exhaust routing and sound characteristics on 1994-1996 Dodge Dakota models.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1994-1996 Dodge Dakota, N\/A, DIRECT FIT MSL\/MAXIMUM Muffler; (except Sport Package)\u003c\/li\u003e\n\u003cli\u003eFits 1995-1996 Dodge Dakota, N\/A, DIRECT FIT MSL\/MAXIMUM Muffler; (Models with Sport Package)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise from a worn muffler\u003c\/li\u003e\n\u003cli\u003eFactory-style sound changes after muffler deterioration\u003c\/li\u003e\n\u003cli\u003eCorrosion-related muffler replacement needs\u003c\/li\u003e\n\u003cli\u003eExhaust system repair on listed Dodge Dakota applications\u003c\/li\u003e\n\u003cli\u003eFitment issues when replacing the original muffler layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm the inlet and outlet locations before installation: center lower inlet and right center outlet. Verify the vehicle’s model year and Sport Package status against the fitment notes for the correct Dodge Dakota application. Because this muffler uses pipe-style connections, proper alignment with the existing exhaust routing is important for a clean direct-fit installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for direct-fit applications, and this muffler is built with aluminized steel and OE comparable sound characteristics for the listed Dodge Dakota fitments. AP Exhaust 700227 is intended to match the specified factory-style configuration for dependable exhaust service.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537822901,"sku":"BBDL-700227","price":56.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700227_Fro_7f75f2d8-aff2-43f7-8330-0bcb81c20802.jpg?v=1774704305"},{"product_id":"ap-exhaust-700247-exhaust-muffler","title":"AP Exhaust 700247 Exhaust Muffler - Front","description":"\u003ch2\u003eAP Exhaust 700247 Muffler Overview\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700247 is a direct-fit exhaust muffler for select Ford applications, including the 1995-2003 Ford Windstar and 2004-2007 Ford Freestar. It uses an oval, baffled design with OE-comparable sound level and 2-inch pipe connections for a factory-style replacement.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700247\u003c\/li\u003e\n\u003cli\u003eBrand: AP Exhaust\u003c\/li\u003e\n\u003cli\u003eSeries: MSL\u003c\/li\u003e\n\u003cli\u003eBody material: aluminized steel\u003c\/li\u003e\n\u003cli\u003eOval muffler body with baffled internal construction\u003c\/li\u003e\n\u003cli\u003eInlet: 2-inch inside diameter, pipe type, left shell location\u003c\/li\u003e\n\u003cli\u003eOutlet: 2-inch inside diameter, pipe type, right shell location\u003c\/li\u003e\n\u003cli\u003eOverall length: 20 inches\u003c\/li\u003e\n\u003cli\u003eBody dimensions: 20 inches long, 10.5 inches wide, 4.06 inches high\u003c\/li\u003e\n\u003cli\u003eSound level: OE comparable\u003c\/li\u003e\n\u003cli\u003eDirect-fit application for Ford Windstar and Ford Freestar\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700247 is built as a regular-grade exhaust muffler for vehicles that need a direct replacement with factory-style sound characteristics. The aluminized steel body helps provide durable corrosion resistance for everyday exhaust service, while the baffled muffler design supports an OE-comparable exhaust note. With a 2-inch inlet and 2-inch outlet in a left-shell to right-shell configuration, this muffler is set up for the specified Ford exhaust routing. This AP Exhaust 700247 muffler is a practical choice for restoring exhaust function on a Ford Windstar or Ford Freestar without changing the original sound profile.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2004-2007 Ford Freestar, N\/A. DIRECT FIT MSL\/MAXIMUM Muffler.\u003c\/li\u003e\n\u003cli\u003eFits 1995-2003 Ford Windstar, N\/A. DIRECT FIT MSL\/MAXIMUM Muffler.\u003c\/li\u003e\n\u003cli\u003eFits 1995-1998 Ford Windstar, Front. DIRECT FIT MSL\/MAXIMUM Muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Replacement Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores a damaged, rusted, or leaking muffler\u003c\/li\u003e\n\u003cli\u003eAddresses exhaust noise that has become louder than OE levels\u003c\/li\u003e\n\u003cli\u003eReplaces a restricted muffler that can affect exhaust flow\u003c\/li\u003e\n\u003cli\u003eSupports repair of factory-style exhaust routing on Ford Windstar and Ford Freestar\u003c\/li\u003e\n\u003cli\u003eHelps correct exhaust vibration or rattling caused by internal muffler wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the inlet and outlet locations, body dimensions, and vehicle position before installation. This muffler uses pipe-style 2-inch connections and a left-shell to right-shell layout, so matching the original exhaust routing is important for proper fitment. Confirm whether your application is the N\/A or Front position listed for your vehicle before ordering. Professional exhaust installation is recommended for best alignment and sealing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700247 is part of the MSL series and is built with aluminized steel construction for service in standard exhaust replacement applications. Its direct-fit design and OE-comparable sound level support a factory-style repair for the specified Ford Windstar and Ford Freestar models.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537855669,"sku":"BBDL-700247","price":105.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700247_Fro_eaca60ef-7f45-4b46-ba3e-bfc619b20c2a.jpg?v=1774704305"},{"product_id":"ap-exhaust-700257-exhaust-muffler","title":"AP Exhaust 700257 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700257 Muffler Overview\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700257 is a direct-fit exhaust muffler for select Chrysler, Dodge, and Plymouth minivans. It uses an aluminized steel body with an oval baffled design and OE-comparable sound level for a factory-style exhaust repair.\u003c\/p\u003e\u003cp\u003eCompatible With 1996-2007 Chrysler Town \u0026amp; Country, Dodge Caravan, Dodge Grand Caravan, Chrysler Voyager, Chrysler Grand Voyager, Plymouth Voyager, and Plymouth Grand Voyager applications listed below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700257\u003c\/li\u003e\n\u003cli\u003eAP Exhaust MSL series muffler\u003c\/li\u003e\n\u003cli\u003eOval muffler body with baffled internal construction\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for corrosion resistance in everyday service\u003c\/li\u003e\n\u003cli\u003eCenter inlet, right center outlet pipe layout\u003c\/li\u003e\n\u003cli\u003eOE-comparable sound level for a factory-style exhaust tone\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for listed minivan applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700257 is built as a replacement exhaust muffler for Chrysler Town \u0026amp; Country, Dodge Caravan, Dodge Grand Caravan, Chrysler Voyager, Chrysler Grand Voyager, Plymouth Voyager, and Plymouth Grand Voyager models in the fitment range shown. The muffler measures 23.25 inches in body length, 10.5 inches in body width, and 4.06 inches in body height, with a 30-inch overall length. It features a 2.25-inch inside diameter inlet at the center and a 2-inch inside diameter outlet at the right center.\u003c\/p\u003e\u003cp\u003eThe baffled muffler design supports an OE-style exhaust note rather than a tuned performance sound. Its aluminized steel construction and regular-grade build make it a practical choice for replacing a worn or damaged factory muffler on minivan exhaust systems. This AP Exhaust 700257 muffler is a direct-fit solution for owners searching for a replacement muffler for 2004-2007 Chrysler Town \u0026amp; Country, 2001-2007 Dodge Caravan, or 2001-2005 Dodge Grand Caravan applications.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Muffler Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise from a rusted or leaking muffler\u003c\/li\u003e\n\u003cli\u003eFactory exhaust tone that has become louder over time\u003c\/li\u003e\n\u003cli\u003eCorrosion-related muffler failure on aluminized steel systems\u003c\/li\u003e\n\u003cli\u003eReplacement needs after damage to the original welded assembly\u003c\/li\u003e\n\u003cli\u003eFitment-specific exhaust repair on listed Chrysler, Dodge, and Plymouth minivans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet location, diameter, and overall length against the original muffler before installation. Some listed applications note that the OE system was a welded assembly, so related exhaust components may need replacement during service to restore proper fit and sealing. Confirm the vehicle year, make, and model exactly against the fitment list for the correct application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2004-2007 Chrysler Town \u0026amp; Country, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.\u003c\/li\u003e\n\u003cli\u003eFits 2001-2007 Dodge Caravan, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.\u003c\/li\u003e\n\u003cli\u003eFits 1996-2005 Chrysler Town \u0026amp; Country, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 2001-2005 Dodge Grand Caravan, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.\u003c\/li\u003e\n\u003cli\u003eFits 2001-2003 Chrysler Voyager, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler; OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.\u003c\/li\u003e\n\u003cli\u003eFits 2000 Chrysler Grand Voyager, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 2000 Chrysler Voyager, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1996-2000 Dodge Caravan, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1996-2000 Dodge Grand Caravan, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1996-2000 Plymouth Grand Voyager, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003cli\u003eFits 1996-2000 Plymouth Voyager, N\/A; DIRECT FIT MSL\/MAXIMUM Muffler\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for direct-fit service applications. Part number 700257 is built to match the listed vehicle fitment and OE-style sound requirements for the specified minivan platforms.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385537888437,"sku":"BBDL-700257","price":65.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700257_Fro.jpg?v=1774704306"},{"product_id":"ap-exhaust-700270-exhaust-muffler","title":"AP Exhaust 700270 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700270 Muffler for Ford Trucks\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700270 is a direct-fit exhaust muffler built for select Ford F-250 and Ford F-350 applications. It uses an oval, baffled design with aluminized steel construction and OE-comparable sound output for a factory-style replacement on compatible trucks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700270\u003c\/li\u003e\n\u003cli\u003eAP Exhaust MSL series muffler\u003c\/li\u003e\n\u003cli\u003eOval body with baffled internal design\u003c\/li\u003e\n\u003cli\u003eAluminized steel body material\u003c\/li\u003e\n\u003cli\u003eHeat shield attached\u003c\/li\u003e\n\u003cli\u003eSingle 2.5 in. inlet, pipe type\u003c\/li\u003e\n\u003cli\u003eDual 2 in. outlets, pipe type\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for select Ford truck applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is engineered around the listed dimensions and outlet\/inlet layout to match the exhaust routing used on specific Ford truck platforms. The 28 in. body length, 32.5 in. overall length, and oval 10.5 in. by 4.06 in. profile support a factory-style installation on the confirmed applications. AP Exhaust 700270 is listed for 1994-1997 Ford F-350 and 1988-1996 Ford F-250, with additional 1988-1993 Ford F-350 coverage noted for direct-fit MSL\/Maximum muffler applications.\u003c\/p\u003e\u003cp\u003eFor buyers searching for a Ford F-250 muffler replacement or a Ford F-350 exhaust muffler direct fit, this part number 700270 provides a straightforward OE-style option with a baffled chamber layout and heat shield already attached. The aluminized steel body is a practical choice for everyday exhaust service where a durable replacement muffler is needed.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 1994-1997 Ford F-350, N\/A. DIRECT FIT MSL\/MAXIMUM Muffler.\u003c\/li\u003e\n\u003cli\u003eFits 1988-1996 Ford F-250, N\/A. DIRECT FIT MSL\/MAXIMUM Muffler; over 8500 lbs. G.V.W.; except with Round Muffler.\u003c\/li\u003e\n\u003cli\u003eFits 1988-1993 Ford F-350, N\/A. DIRECT FIT MSL\/MAXIMUM Muffler; except with Round Muffler.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Replacement Reasons\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise that is louder than factory levels\u003c\/li\u003e\n\u003cli\u003eCorrosion or rust damage to the existing muffler body\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a worn internal baffle design\u003c\/li\u003e\n\u003cli\u003eNeed for a direct-fit Ford F-250 or Ford F-350 muffler replacement\u003c\/li\u003e\n\u003cli\u003eReplacement after heat shield or shell deterioration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation before installation: this muffler uses a right-center inlet and center\/left-center dual outlet layout. Confirm the vehicle is one of the listed Ford F-250 or Ford F-350 applications and check the notes for the over 8500 lbs. G.V.W. requirement and the exception for vehicles equipped with a round muffler. Match the existing exhaust configuration to the muffler shape, outlet size, and overall length before final fitment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for direct-fit service applications. This muffler is built with aluminized steel, a baffled internal design, and an attached heat shield to support consistent replacement quality on the specified Ford truck fitments.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385538052277,"sku":"BBDL-700270","price":110.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700270_Fro.jpg?v=1774704307"},{"product_id":"ap-exhaust-700300-exhaust-muffler","title":"AP Exhaust 700300 Exhaust Muffler - Left or Rear Left","description":"\u003ch2\u003eAP Exhaust 700300 Muffler Overview\u003c\/h2\u003e\u003cp\u003eThe AP Exhaust 700300 is a direct-fit exhaust muffler for select GM W-body applications with dual exhaust. Built from aluminized steel with an oval baffled design, it uses a 1.88-inch inlet and 2.25-inch outlet to match the specified rear-left or left-side position on supported vehicles.\u003c\/p\u003e\u003cp\u003eFor shoppers searching for a Buick LaCrosse muffler, Pontiac Grand Prix muffler, or Chevrolet Monte Carlo rear left exhaust replacement, this AP Exhaust 700300 offers an OE-comparable sound level and a regular-grade construction for factory-style service replacement.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700300\u003c\/li\u003e\n\u003cli\u003eAP Exhaust MSL series muffler\u003c\/li\u003e\n\u003cli\u003eOval baffled muffler configuration\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for exhaust system service replacement\u003c\/li\u003e\n\u003cli\u003e1.88-inch inlet inside diameter, left lower inlet location\u003c\/li\u003e\n\u003cli\u003e2.25-inch outlet inside diameter, center lower outlet location\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level\u003c\/li\u003e\n\u003cli\u003eDirect-fit application for select rear-left and left-side dual exhaust vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe AP Exhaust 700300 muffler is engineered for direct replacement on specific Buick, Pontiac, and Chevrolet dual-exhaust applications. Its oval body measures 7 inches high, 9 inches wide, and 14 inches long, with an 18-inch overall length, giving it the dimensions needed for the listed rear-left and left-side installations. The baffled internal design supports factory-style exhaust tone, while the aluminized steel construction is suited to standard exhaust repair and replacement work.\u003c\/p\u003e\u003cp\u003eCompatible With 2005-2008 Buick LaCrosse, rear left; 2003-2008 Pontiac Grand Prix, rear left; 2005-2007 Buick Allure, rear left; 2003-2005 Chevrolet Monte Carlo, rear left; 2000-2002 Chevrolet Monte Carlo, rear left; and 1997-2002 Pontiac Grand Prix, left. This part number, 700300, is a practical choice when replacing a worn or damaged rear muffler on these applications.\u003c\/p\u003e\u003ch2\u003eCommon Replacement Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring exhaust flow after muffler corrosion or internal failure\u003c\/li\u003e\n\u003cli\u003eReplacing a noisy muffler with an OE-comparable sound level unit\u003c\/li\u003e\n\u003cli\u003eRepairing exhaust leaks at the rear-left muffler location\u003c\/li\u003e\n\u003cli\u003eReplacing a damaged muffler on dual-exhaust Buick, Pontiac, or Chevrolet models\u003c\/li\u003e\n\u003cli\u003eAddressing fitment issues on factory-style rear exhaust service jobs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify inlet and outlet orientation before installation: left lower inlet, center lower outlet. Confirm the vehicle uses the listed dual-exhaust configuration and rear-left or left-side muffler position before ordering. The muffler is not tunable and does not include a heat shield attached. Professional exhaust installation is recommended to ensure proper alignment and sealing.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures this muffler as a regular-grade replacement part in the MSL series, using aluminized steel for standard exhaust service applications. The 700300 is built to match the listed direct-fit vehicle applications and OE-comparable sound requirements.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385538085045,"sku":"BBDL-700300","price":75.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700300_Fro_faa7c2ff-3db9-4ddb-8440-4b414a3fce64.jpg?v=1774704308"},{"product_id":"ap-exhaust-700333-exhaust-muffler","title":"AP Exhaust 700333 Exhaust Muffler - Rear","description":"\u003ch2\u003eAP Exhaust 700333 Muffler Overview\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700333 is a direct-fit exhaust muffler for select Pontiac Grand Prix, Buick Century, and Chevrolet Monte Carlo applications. Built with aluminized steel and an oval baffled design, it is sized for OE-style replacement service and OE comparable sound control.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700333\u003c\/li\u003e\n\u003cli\u003eSeries: MSL\u003c\/li\u003e\n\u003cli\u003eBody material: aluminized steel\u003c\/li\u003e\n\u003cli\u003eOval muffler body with baffled construction\u003c\/li\u003e\n\u003cli\u003eInlet: 2.25 in. pipe, right lower location\u003c\/li\u003e\n\u003cli\u003eOutlet: 2.25 in. spout, center lower location\u003c\/li\u003e\n\u003cli\u003eSound level: OE comparable\u003c\/li\u003e\n\u003cli\u003eBody dimensions: 7 in. height, 9 in. width, 14 in. length\u003c\/li\u003e\n\u003cli\u003eOverall length: 28.38 in.\u003c\/li\u003e\n\u003cli\u003eSingle inlet and single outlet configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700333 is engineered for direct replacement on vehicles that use a welded OE exhaust assembly. Its baffled muffler design and OE comparable sound level support a factory-style exhaust note while maintaining the correct 2.25-inch inlet and outlet sizing for the listed applications. This muffler is a practical choice for drivers servicing a Pontiac Grand Prix, Buick Century, or Chevrolet Monte Carlo with a single exhaust layout.\u003c\/p\u003e\u003cp\u003eCompatible vehicle coverage includes Fits 2005-2008 Pontiac Grand Prix, rear; Fits 1997-2002 Pontiac Grand Prix, rear; Fits 1997-2005 Buick Century, N\/A; Fits 2000-2005 Chevrolet Monte Carlo, rear; and Fits 1997-2003 Pontiac Grand Prix, N\/A. AP Exhaust 700333 is also referenced by the part number 700333 for application matching and catalog lookup.\u003c\/p\u003e\u003ch2\u003eWhat This Muffler Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise from a worn or damaged muffler\u003c\/li\u003e\n\u003cli\u003eRust or corrosion in the original aluminized exhaust section\u003c\/li\u003e\n\u003cli\u003eFactory exhaust fitment issues on welded OE systems\u003c\/li\u003e\n\u003cli\u003eLoss of OE-style sound control in single exhaust applications\u003c\/li\u003e\n\u003cli\u003eReplacement needs for a damaged oval muffler body\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eThis muffler is intended for direct-fit replacement on the listed vehicles and positions. Because the OE system was welded on many of these applications, related exhaust parts noted in the fitment data should be inspected and replaced as needed before installation. Verify inlet and outlet orientation, overall length, and body clearance against the existing exhaust layout before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures this muffler as a regular-grade replacement part for OE-style service. The aluminized steel construction and baffled internal design are selected to support everyday exhaust replacement needs on the specified Pontiac, Buick, and Chevrolet applications.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385538248885,"sku":"BBDL-700333","price":73.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700333_Fro_01b2ecdc-8fa7-4584-ade1-4a289049a011.jpg?v=1774704309"},{"product_id":"ap-exhaust-700337-exhaust-muffler","title":"AP Exhaust 700337 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700337 Muffler for Caravan and Voyager\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700337 is a direct-fit exhaust muffler for select Dodge Caravan, Chrysler Voyager, Plymouth Voyager, Dodge Grand Caravan, and Plymouth Grand Voyager applications. It uses an aluminized steel oval body with a baffled D configuration to maintain OE-comparable sound levels while matching the factory exhaust layout.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number 700337 from AP Exhaust\u003c\/li\u003e\n\u003cli\u003eMSL series muffler with OE-comparable sound level\u003c\/li\u003e\n\u003cli\u003eOval aluminized steel body for everyday corrosion resistance\u003c\/li\u003e\n\u003cli\u003eBaffled muffler design for controlled exhaust tone\u003c\/li\u003e\n\u003cli\u003eCenter upper 2.25-inch inlet and right center 2-inch outlet\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for select Dodge Caravan and Chrysler Voyager models\u003c\/li\u003e\n\u003cli\u003eCompatible with 1996-2007 Dodge Caravan, 2001-2003 Chrysler Voyager, 1996-2000 Plymouth Voyager, 1996-1997 Dodge Grand Caravan, and 1996-1997 Plymouth Grand Voyager\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is built with a 24-inch body length, 9-inch body width, and 7-inch body height, with an overall length of 30 inches. The single pipe inlet measures 2.25 inches inside diameter and is located at the center upper position, while the single pipe outlet measures 2 inches inside diameter and exits at the right center. The regular-grade aluminized steel construction and baffled internal layout support a factory-style exhaust note for minivan applications where fitment and sound control matter. AP Exhaust 700337 is a practical OE-style replacement for drivers servicing a worn muffler on a Dodge Caravan or Chrysler Voyager platform.\u003c\/p\u003e\u003ch2\u003eCommon Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a rusted or leaking factory muffler\u003c\/li\u003e\n\u003cli\u003eRestoring exhaust flow after internal muffler failure\u003c\/li\u003e\n\u003cli\u003eReducing exhaust noise that has become louder than stock\u003c\/li\u003e\n\u003cli\u003eAddressing rattling, drone, or uneven muffler tone\u003c\/li\u003e\n\u003cli\u003eReturning a high-mileage minivan exhaust system to a factory-style layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eFits 1996-2007 Dodge Caravan, N\/A; 2001-2003 Chrysler Voyager, N\/A; 1996-2000 Plymouth Voyager, N\/A; 1996-1997 Dodge Grand Caravan, N\/A; and 1996-1997 Plymouth Grand Voyager, N\/A. OE system notes indicate the original exhaust was a welded assembly on some applications, so related parts may need replacement during service. Verify inlet and outlet orientation, pipe diameters, and overall length against the vehicle before installation. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for direct-fit service applications, and this muffler is built to match the listed vehicle fitment and OE-style sound characteristics. Part number 700337 is intended for the specified Caravan and Voyager platforms with the dimensions and outlet configuration shown above.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385538281653,"sku":"BBDL-700337","price":64.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700337_Fro_83c155ce-14d5-4ad2-9b73-d54929d002d5.jpg?v=1774704310"},{"product_id":"ap-exhaust-700338-exhaust-muffler","title":"AP Exhaust 700338 Exhaust Muffler - Rear","description":"\u003ch2\u003eAP Exhaust 700338 Rear Muffler for Regal\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700338 is a rear exhaust muffler built for direct-fit service on 1997-2004 Buick Regal applications. It uses an oval aluminized steel body with a baffled muffler design and OE-comparable sound level for a factory-style replacement on the Regal rear exhaust position.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit rear muffler for 1997-2004 Buick Regal\u003c\/li\u003e\n\u003cli\u003eAP Exhaust part number 700338\u003c\/li\u003e\n\u003cli\u003eOval body construction in aluminized steel\u003c\/li\u003e\n\u003cli\u003eBaffled muffler type with OE-comparable sound level\u003c\/li\u003e\n\u003cli\u003eSingle 2.25 in. inlet and single 2.25 in. outlet\u003c\/li\u003e\n\u003cli\u003eRight lower inlet location and center lower outlet location\u003c\/li\u003e\n\u003cli\u003eOverall length: 29 in.; body dimensions: 7 in. H x 14 in. L x 9 in. W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is part of the MSL series and is configured as an AA muffler type for rear installation on the Buick Regal. The aluminized steel body provides a practical balance of corrosion resistance and service life for everyday exhaust replacement, while the baffled internal design supports an OE-style exhaust note. AP Exhaust 700338 is a direct-fit option for drivers replacing a worn or damaged rear muffler on 1997-2004 Buick Regal models.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestoring a leaking or rusted rear muffler\u003c\/li\u003e\n\u003cli\u003eReplacing a noisy muffler with OE-comparable sound output\u003c\/li\u003e\n\u003cli\u003eAddressing exhaust restriction caused by internal muffler damage\u003c\/li\u003e\n\u003cli\u003eRepairing a damaged inlet or outlet connection on the Regal rear exhaust\u003c\/li\u003e\n\u003cli\u003eReturning the exhaust system to proper rear-section function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 1997-2004 Buick Regal, rear. The OE system was a welded assembly, and AP Exhaust notes that related parts identified in the application should be replaced as needed during service. Verify inlet and outlet orientation before installation: right lower inlet, center lower outlet, with 2.25 in. pipe connections.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures replacement exhaust components for service applications that require direct-fit geometry and OE-style sound characteristics. Part number 700338 is built to match the listed Regal rear muffler application and support a straightforward exhaust repair.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385538314421,"sku":"BBDL-700338","price":92.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700338_Fro.jpg?v=1774704310"},{"product_id":"ap-exhaust-700339-exhaust-muffler","title":"AP Exhaust 700339 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700339 Muffler for OE-Style Replacement\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700339 is a direct-fit exhaust muffler built for select GM minivans that need an OE-comparable sound level and a factory-style exhaust layout. This aluminized steel muffler uses an oval baffled design with a 2.25-inch inlet and 2.25-inch outlet to match the original system configuration on covered applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700339\u003c\/li\u003e\n\u003cli\u003eAP Exhaust MSL series muffler\u003c\/li\u003e\n\u003cli\u003eOval baffled muffler design\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for everyday corrosion resistance\u003c\/li\u003e\n\u003cli\u003e2.25-inch inlet and 2.25-inch outlet\u003c\/li\u003e\n\u003cli\u003eRight-center inlet and center outlet layout\u003c\/li\u003e\n\u003cli\u003eOE comparable sound level\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for select welded OE systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700339 is engineered as a replacement muffler for vehicles originally equipped with a welded exhaust assembly. The 28-inch body length, 32-inch overall length, and oval 7 x 9-inch body dimensions support a factory-style fit on the listed applications. This muffler is part of the MSL series and uses a baffled internal design to maintain an OE-like exhaust tone without adding tunability. For shoppers searching for an AP Exhaust 700339 muffler for Oldsmobile Silhouette or Pontiac Montana exhaust replacement, this part matches the specified inlet and outlet sizing and layout.\u003c\/p\u003e\u003cp\u003eCompatible With 1997-2001 Oldsmobile Silhouette, N\/A; 1999-2001 Pontiac Montana, N\/A; and 1997-1998 Pontiac Trans Sport, N\/A. This part cross-references common OE-style replacement needs for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Muffler Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or perforation in the original muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a failing internal baffle\u003c\/li\u003e\n\u003cli\u003eFactory welded muffler replacement on covered GM minivans\u003c\/li\u003e\n\u003cli\u003eLoss of OE-like exhaust tone after corrosion or damage\u003c\/li\u003e\n\u003cli\u003eFitment problems from using a non-matching inlet and outlet layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s door decal code and exhaust configuration before ordering, especially on 1997-2001 Oldsmobile Silhouette, 1999-2001 Pontiac Montana, and 1997-1998 Pontiac Trans Sport models. The OE system on these applications was a welded assembly, so related exhaust parts noted in the vehicle notes should be inspected and replaced as needed during service. Confirm the 2.25-inch pipe connections and right-center inlet \/ center outlet orientation before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures this muffler as a regular-grade aluminized steel replacement for direct-fit service on the listed vehicles. The MSL series is built to restore factory-style exhaust function and OE-comparable sound on the specified applications.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385538379957,"sku":"BBDL-700339","price":71.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700339_Fro_03e6a70b-7952-4691-95eb-8ebd832260b1.jpg?v=1774704311"},{"product_id":"ap-exhaust-700342-exhaust-muffler","title":"AP Exhaust 700342 Exhaust Muffler - Rear","description":"\u003ch2\u003eAP Exhaust 700342 Rear Muffler for Impala\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700342 is a rear exhaust muffler built for direct-fit replacement on select 2000-2005 Chevrolet Impala applications. It uses an oval aluminized steel body with a baffled design and OE-comparable sound level for a factory-style exhaust tone.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit rear muffler for 2000-2005 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003eAP Exhaust 700342 part number for application matching\u003c\/li\u003e\n\u003cli\u003eOval muffler body with aluminized steel construction\u003c\/li\u003e\n\u003cli\u003eBaffled muffler design with OE-comparable sound level\u003c\/li\u003e\n\u003cli\u003eSingle 2.25-inch inlet and single 2.25-inch outlet\u003c\/li\u003e\n\u003cli\u003eRight lower inlet and center lower outlet layout\u003c\/li\u003e\n\u003cli\u003eMSL series muffler with regular grade construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is configured for the rear position on the Chevrolet Impala and follows the original system layout for the listed years. The 7-inch body height, 9-inch body width, and 14-inch body length support a compact oval profile, while the 30.88-inch overall length reflects the full assembly dimensions. AP Exhaust 700342 is a practical choice for drivers searching for a rear muffler for 2000-2005 Chevrolet Impala, OE-style exhaust muffler replacement, or aluminized steel muffler with 2.25-inch inlet and outlet sizing.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Addresses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust-through or corrosion in the rear muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a damaged or leaking muffler\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a failing factory muffler\u003c\/li\u003e\n\u003cli\u003eFitment problems when replacing a welded OE muffler assembly\u003c\/li\u003e\n\u003cli\u003eLoss of factory-style exhaust tone on the Chevrolet Impala\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2000-2005 Chevrolet Impala, rear. The OE system was a welded assembly, and AP Exhaust notes that all referenced parts should be replaced for proper service on this application. Verify inlet and outlet orientation before installation, since this muffler uses a right lower inlet and center lower outlet configuration. Confirm the 2.25-inch pipe sizing matches the vehicle exhaust connection points before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust manufactures this MSL-series muffler with aluminized steel construction and an OE-comparable sound level for a factory-style replacement on the listed Chevrolet Impala applications. AP Exhaust 700342 is built as a direct-fit exhaust muffler for the specified rear-position fitment.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385538412725,"sku":"BBDL-700342","price":69.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700342_Fro_e1921b0c-7499-406f-9218-21b69cf5ff3a.jpg?v=1774704311"},{"product_id":"ap-exhaust-700378-exhaust-muffler","title":"AP Exhaust 700378 Exhaust Muffler - Center","description":"\u003ch2\u003eAP Exhaust 700378 Muffler for Chrysler and Dodge\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700378 is a direct-fit oval muffler built for select Chrysler and Dodge center-exit applications. It uses aluminized steel construction and a baffled internal design to deliver OE-comparable sound control for vehicles such as the Chrysler 300M, Concorde, LHS, and Intrepid.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 700378\u003c\/li\u003e\n\u003cli\u003eSeries: MSL\u003c\/li\u003e\n\u003cli\u003eOval muffler with baffled construction\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for everyday exhaust service\u003c\/li\u003e\n\u003cli\u003eInlet: 2.5 in. pipe, right center location\u003c\/li\u003e\n\u003cli\u003eOutlet: 2.5 in. pipe, left center location\u003c\/li\u003e\n\u003cli\u003eOE-comparable sound level\u003c\/li\u003e\n\u003cli\u003eOverall length: 22.75 in.; body dimensions: 18 in. long, 11 in. wide, 4.5 in. high\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700378 is an exhaust muffler for center-position applications that require a direct-fit replacement with OE-style sound characteristics. The oval body, baffled muffler type, and pipe-style inlet and outlet support a factory-like exhaust path, while the aluminized steel body provides a practical balance of durability and value. This muffler is listed for 1998-2004 Chrysler Concorde, 1999-2004 Chrysler 300M, 1999-2001 Chrysler LHS, and 1998-2004 Dodge Intrepid, including 2002-2004 Chrysler Intrepid and 2002-2004 Dodge Intrepid. AP Exhaust 700378 is a fitment-focused choice for drivers replacing a welded OE muffler assembly on these Chrysler and Dodge sedans.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExhaust noise that has increased from a worn muffler\u003c\/li\u003e\n\u003cli\u003eRust-through or corrosion in the muffler body\u003c\/li\u003e\n\u003cli\u003eFactory exhaust tone that no longer matches OE levels\u003c\/li\u003e\n\u003cli\u003eReplacement needs for welded OE-style center exhaust assemblies\u003c\/li\u003e\n\u003cli\u003eFitment issues when restoring a direct-fit Chrysler 300M or Dodge Intrepid exhaust section\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eCompatible With 1999-2004 Chrysler 300M, center; 1998-2004 Chrysler Concorde, center; 2002-2004 Chrysler Intrepid, center; 2002-2004 Dodge Intrepid, center; 1998-2000 Dodge Intrepid, center; and 1999-2001 Chrysler LHS, center. OE system was a welded assembly, so replacement of related parts noted in the vehicle application is recommended. Verify inlet and outlet orientation before installation to match the right-center inlet and left-center outlet layout. Part number 700378 is also referenced as 700378 for catalog and search use.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust supplies this muffler as a regular-grade replacement part in the MSL series, with OE-comparable sound performance and application-specific fitment for listed Chrysler and Dodge vehicles.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385538576565,"sku":"BBDL-700378","price":67.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700378_Fro_9c92279d-bd2a-4c53-aa91-28964d35f779.jpg?v=1774704314"},{"product_id":"ap-exhaust-700386-exhaust-muffler","title":"AP Exhaust 700386 Exhaust Muffler","description":"\u003ch2\u003eAP Exhaust 700386 Muffler for Nissan Frontier and Xterra\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700386 is a direct-fit exhaust muffler for select Nissan Frontier and Nissan Xterra applications from 1999-2004. Built with an aluminized steel body and an oval baffled design, it is sized to match OE-style exhaust routing while delivering an OE-comparable sound level.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit muffler for select Nissan Frontier and Nissan Xterra models\u003c\/li\u003e\n\u003cli\u003eAluminized steel body for everyday exhaust system service\u003c\/li\u003e\n\u003cli\u003eOval, baffled muffler configuration with OE-comparable sound level\u003c\/li\u003e\n\u003cli\u003e2-inch inlet and 2-inch outlet with pipe-style connections\u003c\/li\u003e\n\u003cli\u003eRight-center inlet and left-center outlet layout for listed applications\u003c\/li\u003e\n\u003cli\u003eAP Exhaust 700386 part number for catalog and fitment lookup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis AP Exhaust muffler is part of the MSL series and is built in a regular-grade, oval shape with a 22-inch overall length, 18-inch body length, 9-inch body width, and 7-inch body height. The baffled internal design is intended to maintain a factory-like exhaust tone, making it a practical replacement for drivers who want a straightforward repair without changing the character of the exhaust system. AP Exhaust 700386 is listed for Nissan Frontier and Xterra vehicles where the original exhaust system used welded assembly construction, so matching the correct application is important for proper service.\u003c\/p\u003e\u003cp\u003eCompatible With select 1999-2004 Nissan Frontier and 2000-2002 Nissan Xterra applications, this muffler supports OE-style replacement needs for trucks and SUVs with 2.0-inch inlet and outlet sizing. The AP Exhaust 700386 designation is useful when cross-checking catalog data for Frontier and Xterra exhaust repair work.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Muffler Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRust or corrosion in the original muffler body\u003c\/li\u003e\n\u003cli\u003eExhaust noise caused by a damaged or leaking muffler\u003c\/li\u003e\n\u003cli\u003eRestricted exhaust flow from a deteriorated internal muffler structure\u003c\/li\u003e\n\u003cli\u003eFitment problems when replacing a welded OE-style muffler assembly\u003c\/li\u003e\n\u003cli\u003eRestoring a factory-like exhaust tone on Frontier and Xterra models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s year, engine, emissions configuration, and body style against the listed fitment before installation. Because the OE system was a welded assembly on these applications, related exhaust parts noted in the fitment comments should be inspected and replaced as needed to complete the repair correctly. Confirm inlet and outlet orientation, as this muffler uses a right-center inlet and left-center outlet layout.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eAP Exhaust 700386 is built as a direct-fit replacement muffler for the listed Nissan applications and uses aluminized steel construction for standard exhaust service. No warranty information was provided in the product data.\u003c\/p\u003e","brand":"AP Exhaust","offers":[{"title":"Default Title","offer_id":43385538674869,"sku":"BBDL-700386","price":64.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AP_700386_Fro_853862be-70ef-4ed9-940b-2f1e31723356.jpg?v=1774704314"}],"url":"https:\/\/www.partcatalog.com\/collections\/mufflers.oembed?page=35","provider":"PartCatalog","version":"1.0","type":"link"}