{"title":"PWR","description":"","products":[{"product_id":"pwr-42-1003-rack-and-pinion-assembly","title":"PWR 42-1003 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1003 Rack and Pinion for Hyundai Elantra\u003c\/h2\u003e\u003cp\u003ePWR 42-1003 is a hydraulic rack and pinion assembly for the 2001-2006 Hyundai Elantra. It is built as a direct-fit replacement to simplify installation and restore steering response on the Hyundai Elantra platform.\u003c\/p\u003e\u003cp\u003eThis rack and pinion assembly includes inner tie rods, outer tie rods, mounting brackets, and seals. It is USA Engineering Approved and each unit is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods and outer tie rods\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.2 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003eFits 2001-2006 Hyundai Elantra\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eBuilt for steering service on the Hyundai Elantra, PWR 42-1003 replaces the hydraulic rack and pinion assembly with a direct-fit unit that matches the vehicle’s steering layout. The assembly measures 1359 end to end, uses a 16.7 mm steering input shaft diameter, and features 16 mm inlet and 14 mm outlet line fittings with female ends. PWR 42-1003 is a practical choice when restoring steering feel, correcting hydraulic steering issues, or replacing a worn rack on 2001-2006 Hyundai Elantra models. This part cross-references Cardone Reman 26-2411 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or loose steering feel\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks from the rack assembly\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear in the rack, pinion, or tie rod components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the steering input shaft spline count, line fitting sizes, and mounting points before installation. Because mounting hardware is not listed as included, reuse or source the required hardware as needed. After installation, bleed the hydraulic steering system and inspect for leaks, proper assist, and centered steering wheel position.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and this unit is USA Engineering Approved.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634758385845,"sku":"HKKN-42-1003","price":453.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421003_Fro.jpg?v=1774987322"},{"product_id":"pwr-42-1051-rack-and-pinion-assembly","title":"PWR 42-1051 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1051 Rack and Pinion for Jeep Liberty\u003c\/h2\u003e\u003cp\u003ePWR 42-1051 is a hydraulic rack and pinion assembly built for direct-fit replacement on 2002-2005 Jeep Liberty models. It is engineered for straightforward installation and is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eFits 2002-2005 Jeep Liberty\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1247\u003c\/li\u003e\n\u003cli\u003eTotal turns lock to lock: 3.4\u003c\/li\u003e\n\u003cli\u003eSteering input shaft diameter: 18.4\u003c\/li\u003e\n\u003cli\u003eInlet fitting: 16 mm female\u003c\/li\u003e\n\u003cli\u003eOutlet fitting: 18 mm female\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-1051, is made for steering service on the Jeep Liberty platform from 2002 through 2005. It uses a hydraulic design with female inlet and outlet line fittings, and it includes inner tie rods and seals for a more complete steering gear replacement. This part cross-references Continental 64243 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Steering Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness in the front end\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eRough, inconsistent, or noisy steering operation\u003c\/li\u003e\n\u003cli\u003eWorn internal steering gear components\u003c\/li\u003e\n\u003cli\u003eLoss of steering response caused by a failing hydraulic rack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify line fitting sizes, steering shaft diameter, and mounting hole layout before installation. Because mounting hardware and mounting brackets are not included, reuse or source the correct vehicle-specific hardware as needed. After installation, bleed the hydraulic system and inspect for leaks, proper steering effort, and centered wheel position.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are tested for leaks, pressure, noise, and function, and this assembly is USA engineering approved. That testing focus supports consistent steering performance on Jeep Liberty applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634758516917,"sku":"HKKN-42-1051","price":692.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421051_Rig4.jpg?v=1774987322"},{"product_id":"pwr-42-1076-rack-and-pinion-assembly","title":"PWR 42-1076 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1076 Hydraulic Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1076 is a hydraulic rack and pinion assembly built for direct-fit replacement on select BMW steering applications. It is engineered for straightforward installation and is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA Engineering Approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e2 mounting holes\u003c\/li\u003e\n\u003cli\u003e54-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e17.6 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.4 turns lock to lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2001-2006 BMW 325Ci, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2001-2006 BMW 330Ci, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2005-2006 BMW M3, N\/A, without Competition Package\u003c\/li\u003e\n\u003cli\u003eFits 2001-2005 BMW 320i, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2001-2005 BMW 325i, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2001-2005 BMW 330i, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2001-2004 BMW M3, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2000 BMW 323Ci, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1999-2000 BMW 323i, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2000 BMW 328Ci, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1999-2000 BMW 328i, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness at the wheel\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks from the rack assembly\u003c\/li\u003e\n\u003cli\u003eRough, noisy, or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWorn internal rack components affecting steering feel\u003c\/li\u003e\n\u003cli\u003eRestoration work on BMW 3 Series and M3 steering systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify line fitting sizes, input shaft spline count, and mounting points before installation. This assembly does not include mounting hardware, mounting brackets, or outer tie rods. Professional alignment is recommended after replacement, and the steering system should be inspected for related wear before the new rack is installed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR tests its racks and gears for leaks, pressure, noise, and function, and this unit is USA Engineering Approved. This part cross-references Cardone Reman 26-2800 for the same application.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634758779061,"sku":"HKKN-42-1076","price":707.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421076_Fro.jpg?v=1774987322"},{"product_id":"pwr-42-1091-rack-and-pinion-assembly","title":"PWR 42-1091 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1091 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1091 is a hydraulic rack and pinion assembly for select Audi A4, Audi A4 Quattro, Audi S4, and Volkswagen Passat applications. It is built as a direct-fit replacement to simplify installation and restore steering response in vehicles using the specified factory gear setup.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eTwo mounting holes\u003c\/li\u003e\n\u003cli\u003eRegular grade replacement part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePWR part number 42-1091 is a hydraulic steering rack built for select 1996-2005 Audi and Volkswagen platforms. It is engineered for vehicles that require the specified steering gear configuration, including Audi A4 and A4 Quattro models with Koyo gear applications, Audi S4 coverage for 2000-2002, and Volkswagen Passat coverage across the listed years and chassis notes. This rack and pinion assembly is a practical replacement when the original steering gear shows wear, leakage, or inconsistent steering feel. This part cross-references BBB Industries 312-0133 and Cardone Reman 26-9006 for the same application.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2001-2005 Volkswagen Passat, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1998 Volkswagen Passat, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1998-2002 Volkswagen Passat, N\/A, with Koyo Gear\u003c\/li\u003e\n\u003cli\u003eFits 2000 Volkswagen Passat, N\/A, from chassis # 3BXE498356\u003c\/li\u003e\n\u003cli\u003eFits 2000-2002 Audi S4, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2000-2001 Audi A4, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2000-2001 Audi A4 Quattro, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 1999 Audi A4, N\/A, with Koyo Gear\u003c\/li\u003e\n\u003cli\u003eFits 1999 Audi A4 Quattro, N\/A, from chassis #8DX302334\u003c\/li\u003e\n\u003cli\u003eFits 1996-1997 Audi A4, N\/A, with Koyo Gear\u003c\/li\u003e\n\u003cli\u003eFits 1996-1999 Audi A4 Quattro, N\/A, with Koyo Gear\u003c\/li\u003e\n\u003cli\u003eFits 1998 Audi A4, N\/A, with Koyo Gear; from chassis #8DW007800\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering rack fluid leakage\u003c\/li\u003e\n\u003cli\u003eExcessive steering play or looseness\u003c\/li\u003e\n\u003cli\u003eRough or inconsistent steering effort\u003c\/li\u003e\n\u003cli\u003eNoise from a worn hydraulic steering gear\u003c\/li\u003e\n\u003cli\u003eFailure of the original rack and pinion assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s chassis note and steering gear type before ordering, especially on Audi A4 and A4 Quattro models with Koyo gear requirements. Mounting hardware and outer tie rods are not included, so reuse or source the correct related components as needed. Confirm inlet and outlet line fitting sizes, steering input shaft diameter, and end-to-end length against the original unit before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that this steering rack is USA engineering approved and individually tested for leaks, pressure, noise, and function before release. The assembly includes seals and inner tie rods to support a complete steering gear replacement on the listed Audi and Volkswagen applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634758844597,"sku":"HKKN-42-1091","price":628.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421091_Fro_fce0b31f-ba9e-4c89-b107-aa2ed612b8fb.jpg?v=1774987323"},{"product_id":"pwr-42-1106-rack-and-pinion-assembly","title":"PWR 42-1106 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR Rack and Pinion Assembly for Nissan Quest\u003c\/h2\u003e\u003cp\u003eThis PWR hydraulic rack and pinion assembly is a direct-fit steering replacement for the 2004-2009 Nissan Quest. Built for OE-style installation and tested for leaks, pressure, noise, and function, it supports precise steering response in a vehicle-specific application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eFits 2004-2009 Nissan Quest\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.1 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1106 rack and pinion assembly is engineered for the Nissan Quest steering system and uses a hydraulic design with a 1290 end-to-end length, 17.4 mm steering input shaft diameter, and 14 mm inlet \/ 16 mm outlet line fittings. It is a direct-fit replacement intended for 2004-2009 Nissan Quest models and cross-references BBB Industries 310-0164 and Cardone New 97-3026 for the same application. The 42-1106 part number is a practical match for drivers replacing a worn steering gear on a Nissan Quest.\u003c\/p\u003e\u003ch2\u003eCommon Steering Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or loose steering feel\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear-related steering gear performance loss\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify hydraulic line fitting sizes, input shaft spline count, and mounting points before installation. This assembly includes mounting brackets and inner tie rods, but mounting hardware is not included. Always inspect related steering components, flush the hydraulic system as needed, and align the vehicle after installation. Confirm the application against the 2004-2009 Nissan Quest before final assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and that the units are USA engineering approved. The 42-1106 is built as a direct-fit steering replacement for the Nissan Quest platform.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634759008437,"sku":"HKKN-42-1106","price":685.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421106_Fro.jpg?v=1774987323"},{"product_id":"pwr-42-1114-rack-and-pinion-assembly","title":"PWR 42-1114 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1114 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1114 is a hydraulic rack and pinion assembly built for direct-fit replacement in select Ford, Mazda, and Mercury applications. It is engineered for straightforward installation and is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e2 mounting holes\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1140\u003c\/li\u003e\n\u003cli\u003eSteering input shaft diameter: 18.4\u003c\/li\u003e\n\u003cli\u003eTotal turns lock to lock: 4.1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication Details\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is compatible with 1995-2003 Ford Explorer, 1999-2001 Ford Explorer, left hand drive, 2001 Ford Explorer Sport Trac, to 04\/07\/2001, 1998-2000 Ford Ranger, 1997-2001 Mercury Mountaineer, 1998-2000 Mazda B3000, 1998-2000 Mazda B4000, 1998-2001 Mazda B2500, and 2001-2003 Mazda B2300. This part number, 42-1114, also cross-references BBB Industries N101-0117 and Cardone Reman 22-237 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness in the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks at the rack, seals, or line fittings\u003c\/li\u003e\n\u003cli\u003eNoise or rough steering effort during turning\u003c\/li\u003e\n\u003cli\u003eUneven steering response caused by worn internal components\u003c\/li\u003e\n\u003cli\u003eFailure of the original rack and pinion unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify steering input shaft diameter, line fitting size, and mounting hole layout before installation. This assembly does not include mounting hardware or mounting brackets, and outer tie rods are not included. Inner tie rods are included, and the unit uses female inlet and outlet fittings with 16 mm line fitting diameters.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are tested for leaks, pressure, noise, and function, and this assembly is USA engineering approved. The direct-fit design supports a cleaner replacement process on Ford Explorer, Mazda B2500, and related applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634760220853,"sku":"HKKN-42-1114","price":797.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421114_Fro.jpg?v=1774987324"},{"product_id":"pwr-42-1203-rack-and-pinion-assembly","title":"PWR 42-1203 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1203 Rack and Pinion for Toyota RAV4\u003c\/h2\u003e\u003cp\u003ePWR 42-1203 is a hydraulic rack and pinion assembly built for direct-fit replacement on 2004-2005 Toyota RAV4 models. It is engineered for straightforward installation and is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for 2004-2005 Toyota RAV4\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft with 18 mm diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.0 turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1140 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-1203, is a hydraulic steering gear replacement for the Toyota RAV4. It is built as a direct-fit unit to simplify installation and restore steering response in vehicles that need a replacement rack. The assembly includes inner tie rods and a seal, with mounting hole and line-fitting specifications matched to the application. PWR states that its racks and gears are USA engineering approved and individually tested for leak integrity, pressure performance, noise, and function. This part cross-references Maval 95326M for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness in the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks from worn internal seals\u003c\/li\u003e\n\u003cli\u003eNoisy or rough steering operation\u003c\/li\u003e\n\u003cli\u003eUneven steering feel during turning\u003c\/li\u003e\n\u003cli\u003eFailure of the original steering gear on a Toyota RAV4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify steering shaft spline count, input shaft diameter, and hydraulic line fitting sizes before installation. This rack uses female inlet and outlet fittings and does not include mounting hardware or mounting brackets. Professional alignment is required after installation to restore proper steering geometry on the Toyota RAV4.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR tests each rack and pinion assembly for leaks, pressure, noise, and function. The manufacturer also identifies this unit as USA engineering approved for direct-fit replacement use.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634760351925,"sku":"HKKN-42-1203","price":575.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421203_Fro.jpg?v=1774987324"},{"product_id":"pwr-42-1329-rack-and-pinion-assembly","title":"PWR 42-1329 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1329 Hydraulic Rack and Pinion\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1329 is a hydraulic rack and pinion assembly for steering service on select Dodge Dakota and Dodge Durango models. It is built as a direct-fit replacement to simplify installation and is engineered for consistent steering response in daily driving and repair applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e2 mounting holes\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cp\u003eCompatible with 2000-2004 Dodge Dakota and 2000-2003 Dodge Durango. This PWR 42-1329 steering rack is a direct replacement for hydraulic steering systems used on these applications. It cross-references Gates 22349 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Steering Rack Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or looseness\u003c\/li\u003e\n\u003cli\u003eFluid leakage from a worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoise or roughness during steering input\u003c\/li\u003e\n\u003cli\u003eUneven steering feel caused by internal wear\u003c\/li\u003e\n\u003cli\u003eFailure of internal hydraulic sealing components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify steering input shaft diameter, line fitting size, and mounting points before installation. This assembly uses a hydraulic design with a 20 mm steering input shaft, 16 mm inlet and outlet fittings, and a 3.2 lock-to-lock turn ratio. Mounting hardware and mounting brackets are not included, so reuse or source the required vehicle-specific components as needed.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that this rack and pinion assembly is USA engineering approved and individually tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634760548533,"sku":"HKKN-42-1329","price":692.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421329_Fro.jpg?v=1774987324"},{"product_id":"pwr-42-1379-rack-and-pinion-assembly","title":"PWR 42-1379 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1379 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1379 is a hydraulic rack and pinion assembly for Chrysler and Dodge minivans with direct-fit dimensions for straightforward replacement. It is engineered for 2001-2004 Chrysler Town \u0026amp; Country, Voyager, Grand Voyager, and 2001-2004 Dodge Caravan and Grand Caravan applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e31-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.1 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is built for steering system replacement on Chrysler Town \u0026amp; Country, Chrysler Voyager, Dodge Caravan, and Dodge Grand Caravan models from 2001-2004, plus 2001-2002 Chrysler Grand Voyager applications. The hydraulic design uses female inlet and outlet line fittings, a 31-spline input shaft, and a 1276 end-to-end length to match the specified steering layout. Part number 42-1379 is a direct-fit steering gear solution for restoring steering response and hydraulic assist performance. This part cross-references Atlantic Automotive Engineering 64192 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Is Used For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a leaking or worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eRestoring steering assist in hydraulic steering systems\u003c\/li\u003e\n\u003cli\u003eAddressing excessive steering play or loose steering feel\u003c\/li\u003e\n\u003cli\u003eCorrecting noise, binding, or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eRepairing steering system fluid loss at the rack assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, shaft diameter, line fitting sizes, and mounting hole quantity before installation. Mounting hardware and mounting brackets are not included, so reuse or source the required vehicle-specific hardware as needed. Inspect tie rod ends, hydraulic lines, and seals during replacement to reduce repeat steering issues. Confirm fitment for the exact year and model before ordering PWR 42-1379.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are engineered in the USA and tested for leaks, pressure, noise, and function before release. The included seals support proper hydraulic sealing at installation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2001-2004 Chrysler Town \u0026amp; Country, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2001-2004 Chrysler Voyager, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2001-2004 Dodge Caravan, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2001-2004 Dodge Grand Caravan, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2001-2002 Chrysler Grand Voyager, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634760614069,"sku":"HKKN-42-1379","price":543.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421379_Fro.jpg?v=1774987325"},{"product_id":"pwr-42-1389-rack-and-pinion-assembly","title":"PWR 42-1389 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1389 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1389 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Suzuki steering systems. It is engineered for the 1999-2005 Suzuki Grand Vitara and 2002-2006 Suzuki XL-7, with fitment focused on restoring precise steering response and consistent hydraulic operation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly for steering system replacement\u003c\/li\u003e\n\u003cli\u003eDirect-fit design to simplify installation on supported applications\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods, mounting brackets, and gasket\/seal\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft with 16.8 mm diameter\u003c\/li\u003e\n\u003cli\u003e14 mm female inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.88 turns lock to lock for measured steering input\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1109\u003c\/li\u003e\n\u003cli\u003eFits 1999-2005 Suzuki Grand Vitara and 2002-2006 Suzuki XL-7\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePWR part number 42-1389 is a hydraulic rack and pinion assembly designed as a direct-fit steering replacement for the Suzuki Grand Vitara and Suzuki XL-7 applications listed above. It includes inner tie rods, mounting brackets, and a gasket or seal, helping support a complete steering gear service where the original rack has wear, leakage, or inconsistent hydraulic performance. The assembly uses female 14 mm inlet and outlet fittings, a 36-spline input shaft, and a 16.8 mm shaft diameter for application-specific fitment. This part cross-references Maval 9383M for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering fluid leaks from the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eExcessive steering play or loose on-center feel\u003c\/li\u003e\n\u003cli\u003eNoise or roughness during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear in the hydraulic steering gear on Suzuki Grand Vitara or XL-7 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify line fitting size, input shaft spline count, and overall rack dimensions before installation. Mounting hardware is not included, so reuse or source the required fasteners as needed for the vehicle. After installation, bleed the hydraulic steering system and inspect for leaks, proper fluid level, and centered steering wheel position. Confirm alignment after steering component replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are engineered in the USA and tested for leaks, pressure, noise, and function before release. The 42-1389 is built to meet direct-fit replacement requirements for the listed Suzuki applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634762023093,"sku":"HKKN-42-1389","price":580.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421389_Fro.jpg?v=1774987325"},{"product_id":"pwr-42-1404-rack-and-pinion-assembly","title":"PWR 42-1404 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1404 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1404 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Ford Ranger and Mazda truck applications. It is engineered in the USA, fully tested for leaks, pressure, noise, and function, and includes inner tie rods with seals installed for a cleaner service replacement.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly for steering system repair\u003c\/li\u003e\n\u003cli\u003eDirect-fit design to simplify installation on supported applications\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eInner tie rods included; outer tie rods not included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.5 turns lock-to-lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-1404, is built for hydraulic steering systems and matches the OE-style layout used on 2001-2012 Ford Ranger, 2001-2009 Mazda B4000, and 2001-2007 Mazda B3000 models. With an end-to-end length of 1140, an 18.4 steering input shaft diameter, and female inlet and outlet fittings, it is intended to restore steering response and fluid control in the original steering gear location. This part cross-references Maval 95351M and Spectra Premium 1010149 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Is Used For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a leaking or worn hydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eAddressing loose, uneven, or delayed steering feel\u003c\/li\u003e\n\u003cli\u003eCorrecting steering fluid loss from worn internal seals\u003c\/li\u003e\n\u003cli\u003eRestoring steering control in Ford Ranger and Mazda B3000\/B4000 trucks\u003c\/li\u003e\n\u003cli\u003eReplacing a noisy or binding steering gear assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify steering line fitting sizes, shaft diameter, and mounting hole layout before installation. Mounting hardware and mounting brackets are not included, and outer tie rods are not included. Because this assembly includes inner tie rods and seals, inspect related steering components, fluid condition, and alignment parts during service. Professional installation and a post-installation alignment are recommended after steering gear replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function before release. The assembly is USA engineering approved and built as a direct-fit replacement for the listed Ford Ranger and Mazda applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634762383541,"sku":"HKKN-42-1404","price":678.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421404_Fro.jpg?v=1774987325"},{"product_id":"pwr-42-1406-rack-and-pinion-assembly","title":"PWR 42-1406 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1406 Hydraulic Rack and Pinion\u003c\/h2\u003e\u003cp\u003ePWR 42-1406 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Chevrolet Silverado 1500 and GMC Sierra 1500 applications. It is engineered for easier installation, with tested leak, pressure, noise, and function performance to support consistent steering response.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for select GM truck applications\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003ePart number: 42-1406\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is built for steering service on 1999-2006 Chevrolet Silverado 1500 and 1999-2006 GMC Sierra 1500 models, with additional coverage for 2007 Silverado 1500 Classic and 2007 Sierra 1500 Classic applications. It uses a hydraulic design with a 3.4 lock-to-lock turn ratio, a 20 mm steering input shaft diameter, female inlet and outlet fittings, and a 1289 end-to-end length. The assembly includes inner tie rods and a seal, while mounting hardware, mounting brackets, and outer tie rods are not included. This part cross-references Maval 95485M and NGK 2015 for the same application. Part number 42-1406 is a direct-fit steering replacement for drivers servicing Chevrolet Silverado 1500 and GMC Sierra 1500 trucks.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Addresses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or loose steering feel\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear-related steering performance loss on Silverado 1500 and Sierra 1500 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Fitment\u003c\/h2\u003e\u003cp\u003eCompatible With:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2007 Chevrolet Silverado 1500 Classic, N\/A, with HP2\u003c\/li\u003e\n\u003cli\u003eFits 2007 Chevrolet Silverado 1500 Classic, N\/A, without HP2; with 2 wheel steering\u003c\/li\u003e\n\u003cli\u003eFits 2007 GMC Sierra 1500 Classic, N\/A, with HP2\u003c\/li\u003e\n\u003cli\u003eFits 2007 GMC Sierra 1500 Classic, N\/A, without HP2; with 2 wheel steering\u003c\/li\u003e\n\u003cli\u003eFits 1999-2006 Chevrolet Silverado 1500, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2006 Chevrolet Silverado 1500, N\/A, with HP2\u003c\/li\u003e\n\u003cli\u003eFits 2006 Chevrolet Silverado 1500, N\/A, without HP2; without 20 inch wheels; except 5.8 foot bed\u003c\/li\u003e\n\u003cli\u003eFits 2006 Chevrolet Silverado 1500, N\/A, without NHT; without 20 inch wheels\u003c\/li\u003e\n\u003cli\u003eFits 1999-2006 GMC Sierra 1500, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2006 GMC Sierra 1500, N\/A, with HP2\u003c\/li\u003e\n\u003cli\u003eFits 2006 GMC Sierra 1500, N\/A, without HP2; without NHT; without 20 inch wheels; with 5.8 foot bed; steering\u003c\/li\u003e\n\u003cli\u003eFits 2006 GMC Sierra 1500, N\/A, without NHT; without 20 inch wheels\u003c\/li\u003e\n\u003cli\u003eFits 2004-2005 Chevrolet Silverado 1500, N\/A, without BV4; without B2E\u003c\/li\u003e\n\u003cli\u003eFits 2004-2005 GMC Sierra 1500, N\/A, without BV4; without B2E\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBefore installation, verify steering option codes, wheel size, bed length, and package notes such as HP2, NHT, BV4, and B2E. Confirm line fitting sizes and shaft dimensions against the original unit before replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are USA engineering approved and individually tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634762612917,"sku":"HKKN-42-1406","price":743.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421406_Fro.jpg?v=1774987325"},{"product_id":"pwr-42-1410-rack-and-pinion-assembly","title":"PWR 42-1410 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1410 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1410 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Chevrolet Impala and Chevrolet Monte Carlo applications. It is engineered for straightforward installation and is USA Engineering Approved, with each unit tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA Engineering Approved\u003c\/li\u003e\n\u003cli\u003eTested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e2.4 total turns lock to lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR steering rack is built to replace worn hydraulic steering gear in compatible Chevrolet full-size sedan and coupe applications. The 42-1410 features a 19.8 mm steering input shaft diameter, 18 mm inlet fitting, 16 mm outlet fitting, and a 1264 end-to-end length. It is a regular-grade replacement assembly with two mounting holes and no mounting hardware or mounting brackets included. This part cross-references Standard Ignition 2017 for the same application.\u003c\/p\u003e\u003cp\u003eCompatible With 2004-2005 Chevrolet Impala with FE4 suspension, 2004-2005 Chevrolet Monte Carlo with FE4 suspension, 2006-2007 Chevrolet Impala, 2006-2007 Chevrolet Monte Carlo, and 2008-2011 Chevrolet Impala with FE3 suspension. If you are replacing a hydraulic steering rack on a Chevrolet Impala or Chevrolet Monte Carlo, PWR 42-1410 provides the core steering components needed for a direct replacement.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness from a worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eHydraulic steering fluid leaks at the rack or line connections\u003c\/li\u003e\n\u003cli\u003eNoise or rough steering operation during turns\u003c\/li\u003e\n\u003cli\u003eUneven steering response caused by internal wear\u003c\/li\u003e\n\u003cli\u003eRestoring steering feel in FE3 or FE4 suspension applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle’s suspension code and steering line fitting sizes before installation. Transfer or replace any required external components not included with the assembly, and inspect hydraulic lines, tie rod ends, and related steering parts for wear while the rack is removed. Proper bleeding of the hydraulic system is important after installation to remove air and restore consistent steering assist.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are tested for leaks, pressure, noise, and function, and this assembly is USA Engineering Approved. Those checks help confirm the unit is ready for service in the specified Chevrolet Impala and Chevrolet Monte Carlo applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634762743989,"sku":"HKKN-42-1410","price":613.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421410_Fro.jpg?v=1774987326"},{"product_id":"pwr-42-1634-rack-and-pinion-assembly","title":"PWR 42-1634 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1634 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1634 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Toyota and Lexus applications. It is engineered for straightforward installation and is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cp\u003eCompatible with 2000-2004 Toyota Avalon, 1999-2001 Lexus ES300, and 2000-2001 Toyota Camry, this rack and pinion assembly supports precise steering response in common front-wheel-drive sedan applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e19 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e2.9 total turns lock to lock\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1306 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-1634, is a hydraulic steering gear replacement for vehicles that require a direct-fit OE-style solution. It is built with a 2-bolt mounting pattern, includes inner tie rods, and uses female inlet and outlet line fittings sized at 16 mm and 17 mm. The assembly is tested for leaks, pressure, noise, and function to verify steering performance before installation. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003cp\u003eUse PWR 42-1634 when servicing steering systems on Toyota Avalon, Lexus ES300, and Toyota Camry models listed in the fitment data. The steering ratio and hydraulic configuration make it a direct replacement choice for restoring steering feel and control.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part May Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks from the steering gear\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWorn internal rack components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, line fitting size, and mounting points before installation. Transfer or replace related steering components as needed during service, and inspect hydraulic lines, boots, and alignment settings after the rack and pinion assembly is installed. Professional alignment is recommended after steering gear replacement.\u003c\/p\u003e\u003cp\u003eFits 2000-2004 Toyota Avalon, N\/A. Fits 1999-2001 Lexus ES300, N\/A. Fits 2000-2001 Toyota Camry, N\/A.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and this assembly is USA engineering approved. Those checks support consistent steering-system performance for the listed Toyota and Lexus applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634762875061,"sku":"HKKN-42-1634","price":473.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421634_Fro.jpg?v=1774987326"},{"product_id":"pwr-42-1663-rack-and-pinion-assembly","title":"PWR 42-1663 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1663 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1663 is a hydraulic rack and pinion assembly for select Toyota Corolla, Chevrolet Prizm, and Geo Prizm applications. It is built as a direct-fit replacement to simplify installation and is engineered for steering performance, leak control, and consistent function.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier replacement\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e17.3 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e1185 mm end-to-end length\u003c\/li\u003e\n\u003cli\u003e3.1 turns lock-to-lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is engineered for steering systems that require hydraulic assist and OE-style fitment. The unit is USA engineering approved and tested for leaks, pressure, noise, and function before release. With inner tie rods included and seals supplied, it supports a cleaner replacement process on 1993-1997 Toyota Corolla, 1998-2002 Toyota Corolla, 1993-1997 Geo Prizm, and 1998-2002 Chevrolet Prizm applications. This part cross-references Maval 9191M for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness in the rack assembly\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks from worn rack seals\u003c\/li\u003e\n\u003cli\u003eNoisy or inconsistent steering assist\u003c\/li\u003e\n\u003cli\u003eBinding or rough steering response\u003c\/li\u003e\n\u003cli\u003eWear-related steering performance loss\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify spline count, shaft diameter, and line fitting sizes before installation.\u003c\/li\u003e\n\u003cli\u003eInspect hydraulic lines and related steering components for wear before reassembly.\u003c\/li\u003e\n\u003cli\u003eBecause mounting hardware and brackets are not included, reuse or source the correct vehicle-specific hardware as needed.\u003c\/li\u003e\n\u003cli\u003ePerform a professional alignment after installation.\u003c\/li\u003e\n\u003cli\u003eBleed the power steering system thoroughly to remove air from the hydraulic circuit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and this assembly is backed by that inspection process. The direct-fit design and engineering approval support a dependable replacement for Toyota Corolla, Chevrolet Prizm, and Geo Prizm steering service.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634764480693,"sku":"HKKN-42-1663","price":427.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421663_Fro.jpg?v=1774987326"},{"product_id":"pwr-42-1697-rack-and-pinion-assembly","title":"PWR 42-1697 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1697 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1697 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Toyota trucks and SUVs. It is engineered for 1995-2004 Toyota Tacoma and 1996-2002 Toyota 4Runner applications, with inner tie rods included and seals supplied for service-ready installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly for steering system replacement\u003c\/li\u003e\n\u003cli\u003eDirect-fit design to simplify installation on compatible Toyota Tacoma and Toyota 4Runner models\u003c\/li\u003e\n\u003cli\u003eInner tie rods included; outer tie rods not included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft with 17.4 mm diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.5 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 948 mm\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved and 100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is a hydraulic steering replacement for Toyota Tacoma and Toyota 4Runner vehicles in the listed model years. The direct-fit configuration supports a straightforward swap for worn or leaking steering gear, while the included inner tie rods and seals help streamline the repair process. PWR 42-1697 is built with the specified input shaft, line fitting, and mounting dimensions to match the original steering layout on the covered applications. This part cross-references Cardone New 97-1697 and Cardone Reman 26-1697 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Steering Issues This Part Addresses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering fluid leaks from the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eExcessive steering play or loose steering feel\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear-related failure in the hydraulic steering gear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the steering input shaft spline count, shaft diameter, and hydraulic line fitting sizes before installation. This assembly uses female inlet and outlet fittings and does not include mounting hardware or mounting brackets. Inspect related steering components, alignment settings, and hydraulic lines during replacement to help ensure proper operation after installation. Fits 1995-2004 Toyota Tacoma and 1996-2002 Toyota 4Runner, steering gear application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are tested for leaks, pressure, noise, and function, and this unit is USA engineering approved. Those checks support consistent steering performance for the listed Toyota Tacoma and Toyota 4Runner applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634764578997,"sku":"HKKN-42-1697","price":597.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421697_Fro.jpg?v=1774987327"},{"product_id":"pwr-42-1712-rack-and-pinion-assembly","title":"PWR 42-1712 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1712 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1712 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Honda Civic and Acura EL applications. It is engineered for straightforward installation and is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly for power steering systems\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.6 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Application\u003c\/h2\u003e\u003cp\u003eCompatible with 1996-2000 Honda Civic and 1997-2000 Acura EL steering applications. This PWR 42-1712 rack and pinion assembly matches the listed hydraulic steering setup for these vehicles and supports OE-style replacement needs for Honda Civic and Acura EL models.\u003c\/p\u003e\u003cp\u003eThis part cross-references BBB Industries 305-0120 and Cardone Reman 26-1769 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness from a worn rack and pinion\u003c\/li\u003e\n\u003cli\u003eHydraulic steering fluid leaks at the rack assembly\u003c\/li\u003e\n\u003cli\u003eRough, inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eNoise or binding from internal steering gear wear\u003c\/li\u003e\n\u003cli\u003eFailure of the original steering rack to maintain proper pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify hydraulic line fitting sizes, steering input shaft spline count, and end-to-end length before installation. Mounting hardware, mounting brackets, and outer tie rods are not included, so reuse or replace related components as needed during service. Always inspect the steering system, flush contaminated fluid, and perform a professional alignment after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and this unit is USA engineering approved. Those checks support consistent steering performance for replacement service on the listed Honda Civic and Acura EL applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634764775605,"sku":"HKKN-42-1712","price":578.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421712_Fro.jpg?v=1774987327"},{"product_id":"pwr-42-1714-rack-and-pinion-assembly","title":"PWR 42-1714 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1714 Rack and Pinion for Tacoma\u003c\/h2\u003e\u003cp\u003ePWR 42-1714 is a hydraulic rack and pinion assembly for the 1998-2004 Toyota Tacoma. It is built as a direct-fit replacement to simplify installation and restore steering response on Tacoma trucks with worn or leaking steering gear components.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.3 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-1714, is engineered for Toyota Tacoma steering service on 1998-2004 models. It is a hydraulic unit with a 1134 end-to-end length, 17.4 steering input shaft diameter, and 17 mm inlet \/ 16 mm outlet line fittings. The assembly includes inner tie rods, mounting brackets, and seals, while outer tie rods and mounting hardware are not included. This part cross-references Cardone Reman 26-1611 for the same application.\u003c\/p\u003e\u003cp\u003eFits 1998-2004 Toyota Tacoma, N\/A. Search terms such as Toyota Tacoma rack and pinion replacement, hydraulic steering gear for 1998-2004 Tacoma, and PWR 42-1714 steering assembly align with this application.\u003c\/p\u003e\u003ch2\u003eCommon Steering Issues This Part Addresses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness from a worn rack and pinion\u003c\/li\u003e\n\u003cli\u003eFluid leaks at the steering gear or line connections\u003c\/li\u003e\n\u003cli\u003eNoise during steering input caused by internal wear\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eDamaged inner tie rod components within the steering assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, shaft diameter, and line fitting sizes before installation. Transfer or replace any required outer tie rods separately, since they are not included with this assembly. After installation, inspect the hydraulic system for leaks and bleed the steering system according to Toyota service procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that this rack and pinion assembly is USA engineering approved and individually tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634765103285,"sku":"HKKN-42-1714","price":683.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421714_Fro.jpg?v=1774987328"},{"product_id":"pwr-42-1719-rack-and-pinion-assembly","title":"PWR 42-1719 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1719 Rack and Pinion for Toyota RAV4\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1719 is a hydraulic rack and pinion assembly for 1996-2000 Toyota RAV4 models. Built as a direct-fit steering replacement, it is engineered for straightforward installation and consistent steering response in daily driving.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly for power steering systems\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for 1996-2000 Toyota RAV4 applications\u003c\/li\u003e\n\u003cli\u003eInner tie rods included; outer tie rods not included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for service-ready installation\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft with 19 mm diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e2.7 turns lock to lock for responsive steering feel\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1181 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePWR part number 42-1719 is a hydraulic rack and pinion assembly made for Toyota RAV4 steering service on 1996, 1997, 1998, 1999, and 2000 models. It is engineered as a direct-fit replacement to simplify installation and restore steering system function. The assembly is USA engineering approved and each unit is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cp\u003eThis rack and pinion assembly uses a 36-spline, 19 mm steering input shaft, female inlet and outlet line fittings, and a 2.7 lock-to-lock turn ratio. For buyers searching for a Toyota RAV4 rack and pinion assembly, hydraulic steering rack replacement, or PWR 42-1719 for 1996-2000 Toyota RAV4, this part matches the listed application and specifications. This part cross-references Maval 9267M for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or looseness\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the steering rack assembly\u003c\/li\u003e\n\u003cli\u003eNoise or rough operation in the hydraulic steering system\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear-related steering performance loss on a Toyota RAV4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the steering input shaft spline count, shaft diameter, and line fitting sizes before installation. This assembly does not include mounting hardware, mounting brackets, or outer tie rods, so inspect related steering components and replace worn parts as needed during service. Confirm the vehicle is a 1996-2000 Toyota RAV4 before ordering.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are tested for leaks, pressure, noise, and function, and this unit is USA engineering approved. Those checks support consistent steering performance and help confirm the assembly is ready for service on the specified Toyota RAV4 applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634765430965,"sku":"HKKN-42-1719","price":481.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421719_Fro.jpg?v=1774987328"},{"product_id":"pwr-42-1721-rack-and-pinion-assembly","title":"PWR 42-1721 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1721 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1721 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Nissan Pathfinder and INFINITI QX4 applications. It is engineered for easier installation and is USA Engineering Approved, with each unit tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for select Pathfinder and QX4 applications\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e19 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003e14 mm female inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.3 lock-to-lock turns\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1273\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is built for 1996-2000 Nissan Pathfinder and 1997-2000 INFINITI QX4 models. The hydraulic design supports factory-style steering response, while the direct-fit configuration helps streamline replacement work on the steering gear and related components. Part number 42-1721 is a practical choice when replacing a worn steering rack on these vehicles.\u003c\/p\u003e\u003cp\u003eThis part cross-references Maval 9282M for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Problems It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness from a worn rack and pinion unit\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks at the steering gear\u003c\/li\u003e\n\u003cli\u003eNoisy or inconsistent steering assist\u003c\/li\u003e\n\u003cli\u003eRough steering feel caused by internal wear\u003c\/li\u003e\n\u003cli\u003eFailure of the original rack seals or internal components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, shaft diameter, and line fitting size before installation. This assembly uses female 14 mm inlet and outlet fittings and includes inner tie rods, but mounting hardware and mounting brackets are not included. Professional alignment is recommended after steering component replacement. Confirm vehicle-specific fitment for 1996-2000 Nissan Pathfinder and 1997-2000 INFINITI QX4 before ordering PWR 42-1721.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and that this unit is USA Engineering Approved. Those checks support consistent steering performance for Pathfinder and QX4 replacement applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634768445621,"sku":"HKKN-42-1721","price":577.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421721_Fro.jpg?v=1774987328"},{"product_id":"pwr-42-1723-rack-and-pinion-assembly","title":"PWR 42-1723 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1723 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1723 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Acura CL and Honda Accord applications. It is engineered for straightforward installation and is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly for steering system service\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation on confirmed applications\u003c\/li\u003e\n\u003cli\u003eInner tie rods included; outer tie rods not included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for sealing support during installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1060\u003c\/li\u003e\n\u003cli\u003e3.1 turns lock to lock\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft with 16.4 diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is built for hydraulic steering systems and is intended for vehicles that require a direct replacement unit with the specified input shaft, line fitting, and mounting dimensions. It cross-references Standard Ignition 2029 for the same application. Use PWR 42-1723 when servicing steering response, fluid sealing, or rack wear on 1998-2002 Honda Accord, 2001-2003 Acura CL, and 2000 Honda Accord with ID #S82 A5. The part number 42-1723 is also a useful reference when verifying the correct steering gear before ordering.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness caused by worn rack internals\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leakage from a failing rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoise or rough steering feel during turning\u003c\/li\u003e\n\u003cli\u003eIncorrect steering response from a damaged or worn steering gear\u003c\/li\u003e\n\u003cli\u003eFitment issues when replacing the original rack on Acura CL or Honda Accord models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConfirm the 36-spline input shaft, 16.4 shaft diameter, and 14 mm inlet \/ 16 mm outlet fitting sizes before installation.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and mounting brackets are not included.\u003c\/li\u003e\n\u003cli\u003eOuter tie rods are not included; inner tie rods are included.\u003c\/li\u003e\n\u003cli\u003eVerify vehicle identification details, including the 2000 Honda Accord note with ID #S82 A5, before ordering.\u003c\/li\u003e\n\u003cli\u003eBleed the hydraulic steering system after installation and inspect all line connections for leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are tested for leaks, pressure, noise, and function, and this unit is USA engineering approved. The part number 42-1723 is built to meet the listed fitment and dimensional requirements for confirmed Acura CL and Honda Accord applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634768871605,"sku":"HKKN-42-1723","price":523.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421723_Fro.jpg?v=1774987329"},{"product_id":"pwr-42-1731-rack-and-pinion-assembly","title":"PWR 42-1731 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1731 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1731 is a hydraulic rack and pinion assembly for Volkswagen steering systems that use variable ratio power steering. It is built as a direct-fit replacement to simplify installation and is engineered for consistent steering response in compatible Volkswagen Beetle, Golf, Jetta, and R32 applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e25-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.1 turns lock to lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePWR 42-1731 is a hydraulic steering rack assembly designed for Volkswagen models with variable ratio power steering. It features a 1260 end-to-end length, female inlet and outlet line fittings, and a 16.4 mm steering input shaft diameter. The unit is built for direct replacement use and is tested for leak integrity, pressure performance, noise control, and functional operation before release. This part cross-references Cardone Reman 26-9008 for the same application.\u003c\/p\u003e\u003cp\u003eCompatible With 1998-1999 Volkswagen Beetle with variable ratio power steering, 2000-2001 Volkswagen Beetle German built with variable ratio power steering, 2002-2006 Volkswagen Beetle with variable ratio power steering, 2000-2006 Volkswagen Golf with variable ratio power steering, 2000-2005 Volkswagen Jetta with variable ratio power steering, and 2003 Volkswagen R32 with variable ratio power steering. The PWR 42-1731 is also listed for 2007-2010 Volkswagen Beetle applications.\u003c\/p\u003e\u003ch2\u003eCommon Steering Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or delayed steering response\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering feel\u003c\/li\u003e\n\u003cli\u003eWear-related failure in the hydraulic steering rack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the steering input shaft spline count, shaft diameter, and hydraulic line fitting sizes before installation. This rack uses female inlet and outlet fittings and does not include mounting hardware, mounting brackets, or outer tie rods. Inner tie rods are included, and the gasket or seal is included for installation preparation. Confirm vehicle configuration and model-year fitment before ordering, especially on Volkswagen Beetle, Golf, Jetta, and R32 applications with variable ratio power steering.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are engineered in the USA and individually tested for leaks, pressure, noise, and function. That inspection process supports consistent performance in steering service applications such as the Volkswagen Beetle, Golf, Jetta, and R32.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634769166517,"sku":"HKKN-42-1731","price":482.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421731_Fro.jpg?v=1774987329"},{"product_id":"pwr-42-1801-rack-and-pinion-assembly","title":"PWR 42-1801 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1801 Rack and Pinion for Lexus RX300\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1801 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Lexus RX300 models. It is engineered for straightforward installation and is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e3 mounting holes\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1285 mm\u003c\/li\u003e\n\u003cli\u003eTotal turns lock to lock: 2.67\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cp\u003eCompatible with 1999-2003 Lexus RX300. This fitment covers the Lexus RX300 steering rack replacement application for model years 1999, 2000, 2001, 2002, and 2003.\u003c\/p\u003e\u003cp\u003eThis part cross-references 262611 and 3110188 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness in the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leakage from worn internal seals\u003c\/li\u003e\n\u003cli\u003eNoise or roughness during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eReplacement needs after wear in the original steering gear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify steering shaft spline count, line fitting size, and mounting points before installation. This assembly uses a 36-spline input shaft, 16 mm inlet and outlet line fittings, and includes mounting brackets and inner tie rods, while mounting hardware is not included. Professional alignment is recommended after installation on the Lexus RX300.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that this rack and pinion assembly is USA engineering approved and individually tested for leaks, pressure, noise, and function to confirm proper operation before shipment.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634769363125,"sku":"HKKN-42-1801","price":589.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421801_Fro.jpg?v=1774987329"},{"product_id":"pwr-42-1806-rack-and-pinion-assembly","title":"PWR 42-1806 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1806 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1806 is a hydraulic rack and pinion assembly for select Toyota full-size trucks and SUVs. It is built as a direct-fit replacement to simplify installation and is engineered for consistent steering response in daily driving and repair applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e17.3 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003e1250 mm end-to-end length\u003c\/li\u003e\n\u003cli\u003e3.4 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2001-2007 Toyota Sequoia, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2000-2006 Toyota Tundra, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is engineered for Toyota Sequoia and Toyota Tundra applications that use a hydraulic steering setup. Part number 42-1806 features a 36-spline input shaft, female inlet and outlet fittings, and included inner tie rods to match the specified steering configuration. It is a practical replacement for worn steering gear components on 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia models. This part cross-references Cardone New 97-1618 and BBB Industries 311-0113 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or looseness\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the steering gear\u003c\/li\u003e\n\u003cli\u003eRough or inconsistent steering effort\u003c\/li\u003e\n\u003cli\u003eNoise from a worn hydraulic rack assembly\u003c\/li\u003e\n\u003cli\u003eSteering response issues caused by internal wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, shaft diameter, line fitting size, and overall length before installation. Because mounting hardware and outer tie rods are not included, transfer or source the required related components as needed for the vehicle. Always inspect the hydraulic lines, seals, and steering linkage for wear before completing the repair.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its steering components are USA engineering approved and individually tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634769526965,"sku":"HKKN-42-1806","price":722.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421806_Fro.jpg?v=1774987330"},{"product_id":"pwr-42-1810-rack-and-pinion-assembly","title":"PWR 42-1810 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1810 Rack and Pinion for Honda CR-V\u003c\/h2\u003e\u003cp\u003ePWR 42-1810 is a hydraulic rack and pinion assembly for 1997-2001 Honda CR-V models. It is built as a direct-fit replacement to simplify installation and restore steering response on the vehicle.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.1 turns lock to lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-1810, is engineered for 1997-2001 Honda CR-V steering systems that use hydraulic assist. It features female inlet and outlet line fittings, a 17.4 mm steering input shaft diameter, and a 14 mm inlet with a 16 mm outlet connection. With an end-to-end length of 1114 and two mounting holes, it is built to match the original steering layout on the Honda CR-V.\u003c\/p\u003e\u003cp\u003eThis part cross-references Atlantic Automotive Engineering 3120N for the same application. It also cross-references Maval 9313M for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or looseness\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the steering gear\u003c\/li\u003e\n\u003cli\u003eRough or inconsistent steering effort\u003c\/li\u003e\n\u003cli\u003eNoisy hydraulic steering operation\u003c\/li\u003e\n\u003cli\u003eWorn internal rack and pinion components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eCompatible With 1997-2001 Honda CR-V, N\/A. Verify spline count, line fitting sizes, and mounting points before installation. Mounting hardware and outer tie rods are not included, so reuse or replace related components as needed during service. Always inspect the hydraulic system for contamination and flush the lines before installing the replacement rack and pinion assembly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function before release. The 42-1810 is also described as USA engineering approved for consistent steering-system service.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634770870453,"sku":"HKKN-42-1810","price":564.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421810_Top3.jpg?v=1774987330"},{"product_id":"pwr-42-1843-rack-and-pinion-assembly","title":"PWR 42-1843 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1843 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1843 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Toyota and Lexus applications. It is engineered in the USA, fully tested for leaks, pressure, noise, and function, and includes inner tie rods with seals for a cleaner service replacement.\u003c\/p\u003e\u003cp\u003eCompatible with 2002-2006 Toyota Camry, 2004-2008 Toyota Solara, 2002-2003 Lexus ES300, and 2004-2006 Lexus ES330. This PWR rack and pinion assembly is a practical choice when restoring steering response on these vehicles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eLeak, pressure, noise, and function tested\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e2 mounting holes\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eBuilt for steering systems that use hydraulic assist, PWR part number 42-1843 is intended to replace worn or leaking rack and pinion units while maintaining factory-style fitment. The assembly measures 1112 end to end, uses a 19 mm steering input shaft diameter, and features a 3.3 lock-to-lock turn ratio. Inlet and outlet line fittings are female, with 16 mm inlet and 17 mm outlet connections. This part cross-references Anchor 3570 for the same application.\u003c\/p\u003e\u003cp\u003eFor buyers searching for a 2002-2006 Toyota Camry rack and pinion assembly, a 2004-2008 Toyota Solara steering rack, or a Lexus ES330 \/ ES300 hydraulic steering rack, PWR 42-1843 matches the listed vehicle applications and steering configuration.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Addresses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering fluid leaks from a worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eExcessive steering play or loose on-center feel\u003c\/li\u003e\n\u003cli\u003eNoise during steering input from internal wear\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eFailure of internal seals or hydraulic passages\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, line fitting size, and mounting points before installation. Mounting hardware and mounting brackets are not included, so reuse or source the required vehicle-specific hardware as needed. Inspect power steering lines, tie rod ends, and related steering components during replacement to avoid repeat labor.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that this rack and pinion assembly is USA Engineering Approved and individually tested for leaks, pressure, noise, and function before release. That testing focus supports consistent hydraulic performance and fitment confidence for the listed Toyota and Lexus applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634771067061,"sku":"HKKN-42-1843","price":861.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421843_Top4.jpg?v=1774987330"},{"product_id":"pwr-42-1854-rack-and-pinion-assembly","title":"PWR 42-1854 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1854 Rack and Pinion for Mitsubishi Lancer\u003c\/h2\u003e\u003cp\u003ePWR 42-1854 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Mitsubishi Lancer models. It is engineered for straightforward installation and is USA Engineering Approved, with each unit tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for select Mitsubishi Lancer applications\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.17 lock-to-lock turns\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1230 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-1854, is made for 2002-2007 Mitsubishi Lancer models. It is a hydraulic steering gear assembly with a 16.4 mm steering input shaft diameter, 16 mm inlet fitting diameter, and 17 mm outlet fitting diameter. The unit includes inner tie rods and a seal, while mounting hardware, mounting brackets, and outer tie rods are not included. This part cross-references BBB Industries 309-0129 and Cardone Reman 26-2133 for the same application.\u003c\/p\u003e\u003cp\u003eFor drivers searching for a 2002 Mitsubishi Lancer rack and pinion, a 2003-2007 Mitsubishi Lancer steering gear replacement, or a direct-fit hydraulic rack for Mitsubishi Lancer steering repair, PWR 42-1854 provides the specified OE-style fitment and connection points needed for service work.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness in the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eFluid leakage from worn internal seals\u003c\/li\u003e\n\u003cli\u003eNoise or rough steering operation from a failing hydraulic gear\u003c\/li\u003e\n\u003cli\u003eIncorrect steering response caused by internal wear\u003c\/li\u003e\n\u003cli\u003eReplacement needs after steering system damage or high-mileage wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, shaft diameter, line fitting sizes, and end-to-end length before installation. Because mounting hardware, mounting brackets, and outer tie rods are not included, transfer or source the required related components as needed for the vehicle. Always inspect hydraulic lines, seals, and steering linkage condition during replacement, and bleed the power steering system after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that this rack and pinion assembly is USA Engineering Approved and individually tested for leaks, pressure, noise, and function. That testing helps confirm the unit is ready for service on compatible Mitsubishi Lancer applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634771198133,"sku":"HKKN-42-1854","price":441.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421854_Top3.jpg?v=1774987331"},{"product_id":"pwr-42-1855-rack-and-pinion-assembly","title":"PWR 42-1855 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1855 Hydraulic Rack and Pinion\u003c\/h2\u003e\u003cp\u003ePWR 42-1855 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Subaru applications. It is engineered for easier installation and is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cp\u003eCompatible with Subaru Baja and Subaru Outback steering systems, this rack and pinion assembly supports precise hydraulic steering response for 2000-2004 Subaru Outback and 2003-2006 Subaru Baja applications. The PWR 42-1855 is a practical replacement choice when restoring steering feel on these vehicles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e20-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e1182 end-to-end length\u003c\/li\u003e\n\u003cli\u003e3.1 turns lock to lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR steering rack is built to match the hydraulic steering layout used in select Subaru models. It features female inlet and outlet line fittings, an 18 mm steering input shaft diameter, and a 14 mm inlet with a 16 mm outlet line fitting diameter. The assembly is intended for Subaru Outback and Subaru Baja fitments where a direct replacement rack and pinion is needed, and the included inner tie rods help simplify the rebuild process.\u003c\/p\u003e\u003cp\u003eThis part cross-references 34110AE12A and 262401 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Steering Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or loose steering feel\u003c\/li\u003e\n\u003cli\u003eFluid leakage from a worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent hydraulic steering response\u003c\/li\u003e\n\u003cli\u003eWorn internal steering components on Subaru Outback and Subaru Baja models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify fitment by year and model before installation: Fits 2000-2004 Subaru Outback and Fits 2003-2006 Subaru Baja.\u003c\/li\u003e\n\u003cli\u003eInspect hydraulic lines, seals, and related steering components during replacement.\u003c\/li\u003e\n\u003cli\u003eConfirm spline count, shaft diameter, and line fitting sizes match the original unit.\u003c\/li\u003e\n\u003cli\u003eProfessional alignment is recommended after steering rack replacement.\u003c\/li\u003e\n\u003cli\u003eMounting hardware and mounting brackets are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that this rack and pinion assembly is USA engineering approved and individually tested for leaks, pressure, noise, and function to support consistent steering performance.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634771263669,"sku":"HKKN-42-1855","price":619.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421855_Fro.jpg?v=1774987331"},{"product_id":"pwr-42-1887-rack-and-pinion-assembly","title":"PWR 42-1887 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1887 Rack and Pinion for Toyota RAV4\u003c\/h2\u003e\u003cp\u003ePWR 42-1887 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Toyota RAV4 models. It is engineered for 2001-2003 Toyota RAV4 applications and includes inner tie rods, mounting brackets, and seals for a service-ready steering repair.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e19 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e2.9 turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1143 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is built for steering service on the 2001-2003 Toyota RAV4. The hydraulic design supports factory-style steering response, while the direct-fit configuration helps streamline replacement work on the steering gear and related components. PWR states that its pumps, racks, and gears are fully tested for leaks, pressure, noise, and function, and that the units are USA engineering approved. Part number 42-1887 also cross-references National 3677 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness in the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks at the steering gear\u003c\/li\u003e\n\u003cli\u003eNoisy or rough steering operation\u003c\/li\u003e\n\u003cli\u003eUneven steering response during turning\u003c\/li\u003e\n\u003cli\u003eWear-related steering gear failure on Toyota RAV4 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eFits 2001-2003 Toyota RAV4. Verify spline count, line fitting size, and overall dimensions before installation. Mounting hardware is not listed as included, so reuse or replace fasteners as needed during service. Because this assembly includes inner tie rods and mounting brackets, inspect the rest of the steering system, alignment components, and hydraulic lines before returning the vehicle to service.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR reports that this rack and pinion assembly is tested for leaks, pressure, noise, and function before release. The direct-fit design and USA engineering approval support consistent replacement quality for Toyota RAV4 steering repair.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634771394741,"sku":"HKKN-42-1887","price":515.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421887_Top3.jpg?v=1774987331"},{"product_id":"pwr-42-1888-rack-and-pinion-assembly","title":"PWR 42-1888 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1888 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1888 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Toyota Sienna models. It is engineered for straightforward installation and is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cp\u003eCompatible with 2000-2003 Toyota Sienna applications, this rack and pinion assembly supports precise steering response and OE-style fitment for the Toyota Sienna steering system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e2.9 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePWR 42-1888 is a hydraulic steering rack assembly for 2000-2003 Toyota Sienna models, with 2000 coverage beginning from 02\/01\/2000. It features a 1300 end-to-end length, 17.3 steering input shaft diameter, and 17 mm inlet and 16 mm outlet line fitting diameters. The assembly includes inner tie rods, mounting brackets, and seals to support a complete steering service on the Toyota Sienna.\u003c\/p\u003e\u003cp\u003eThis part cross-references Cardone New 97-2607 and BBB Industries 311-0174 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Steering Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or delayed response\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the steering rack housing or seals\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering feel\u003c\/li\u003e\n\u003cli\u003eWear-related steering rack performance loss\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify vehicle build date for 2000 Toyota Sienna fitment; coverage begins 02\/01\/2000.\u003c\/li\u003e\n\u003cli\u003eConfirm hydraulic line fitting sizes and steering shaft spline count before installation.\u003c\/li\u003e\n\u003cli\u003eInspect related steering components, alignment settings, and fluid condition during replacement.\u003c\/li\u003e\n\u003cli\u003eMounting hardware is not included unless otherwise stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and this assembly is USA engineering approved.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634772869301,"sku":"HKKN-42-1888","price":714.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421888_Lef4.jpg?v=1774987332"},{"product_id":"pwr-42-1917-rack-and-pinion-assembly","title":"PWR 42-1917 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1917 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1917 is a hydraulic rack and pinion assembly for select Chevrolet Colorado, GMC Canyon, and Isuzu i-280\/i-350 applications. Built as a direct-fit replacement, it is engineered for easier installation and tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for straightforward replacement\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings, 12 mm\u003c\/li\u003e\n\u003cli\u003e3.2 turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003e16.8 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1225\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR steering rack is built for vehicles that use hydraulic power steering and the listed OE-style mounting and line connection dimensions. The 42-1917 matches applications for 2004-2006 Chevrolet Colorado and GMC Canyon, including off-road chassis package Z71 versions, plus 2006 Isuzu i-280 and i-350 models with the specified tie rod diameter and VIN breakpoints. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application. If you are replacing a worn steering rack on a Chevrolet Colorado, GMC Canyon, or Isuzu i-350, this assembly provides the core hydraulic steering components needed for a direct replacement.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness at the wheel\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leakage from the rack assembly\u003c\/li\u003e\n\u003cli\u003eRough, noisy, or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eInternal wear in the steering gear assembly\u003c\/li\u003e\n\u003cli\u003eLoss of steering precision in daily driving or off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify VIN breakpoints, chassis package, and tie rod diameter before ordering. This assembly uses two mounting holes, female 12 mm inlet and outlet fittings, and does not include mounting hardware, mounting brackets, or outer tie rods. Confirm steering shaft diameter and line connections against the original unit before installation. Professional alignment is recommended after replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are fully tested for leaks, pressure, noise, and function. The manufacturer also identifies this unit as USA engineering approved.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634773033141,"sku":"HKKN-42-1917","price":664.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421917_Fro.jpg?v=1774987332"},{"product_id":"pwr-42-1926-rack-and-pinion-assembly","title":"PWR 42-1926 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1926 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1926 is a hydraulic rack and pinion assembly for select Nissan Armada, Nissan Titan, Infiniti QX56, and Nissan Pathfinder Armada applications. Built as a direct-fit steering replacement, it is engineered for straightforward installation and consistent steering response.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e3 mounting holes\u003c\/li\u003e\n\u003cli\u003e3.4 turns lock to lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2005-2015 Nissan Armada, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004-2015 Nissan Titan, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004-2013 INFINITI QX56, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004 Nissan Pathfinder Armada, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis PWR rack and pinion assembly is built around hydraulic steering specifications with a 36-spline input shaft, 17.4 mm input shaft diameter, female inlet and outlet fittings, and a 1250 end-to-end length. The PWR 42-1926 is a practical OE-style steering replacement for drivers addressing worn steering gear performance on Nissan Armada, Nissan Titan, and Infiniti QX56 platforms. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness at the wheel\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the steering gear\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering feel\u003c\/li\u003e\n\u003cli\u003eWear-related failure in the original rack and pinion assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify steering shaft spline count, line fitting sizes, and mounting points before installation. Mounting hardware is not included, so reuse or source the required fasteners as needed. Because this assembly includes inner tie rods, inspect outer tie rods, hoses, and related steering components during service to complete the repair correctly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function before release. The assembly is also described as USA engineering approved, supporting consistent build quality for steering system service.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634773131445,"sku":"HKKN-42-1926","price":674.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421926_Fro.jpg?v=1774987332"},{"product_id":"pwr-42-1932-rack-and-pinion-assembly","title":"PWR 42-1932 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1932 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1932 is a hydraulic rack and pinion assembly for select Dodge Sprinter vans. It is built as a direct-fit replacement to simplify installation and is engineered for consistent steering response in daily service.\u003c\/p\u003e\u003cp\u003eCompatible with 2003-2006 Dodge Sprinter 2500 and 2003-2006 Dodge Sprinter 3500, this rack and pinion assembly is a practical choice for restoring steering control on high-mileage commercial vans. The PWR 42-1932 is also cross-referenced to 262145 and 972145 for the same application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e4 mounting holes\u003c\/li\u003e\n\u003cli\u003e54-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis steering rack is built for the Dodge Sprinter 2500 and Dodge Sprinter 3500 from 2003 through 2006. It uses a hydraulic design with a 17.5 mm steering input shaft, 14 mm inlet fitting, 16 mm outlet fitting, and 3.9 turns lock to lock. The assembly measures 1469 end to end and includes inner tie rods, while outer tie rods, mounting hardware, and mounting brackets are not included.\u003c\/p\u003e\u003cp\u003ePWR 42-1932 is intended for owners replacing a worn or leaking steering gear on a Sprinter van and looking for a direct-fit rack and pinion assembly that matches the original hydraulic layout. The part number 42-1932 is a useful reference when verifying the correct steering gear for 2003-2006 Dodge Sprinter 2500 and 3500 applications.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Addresses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering fluid leaks from a worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eExcessive steering play or loose steering feel\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eFailure of internal rack seals or hydraulic components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm fitment by matching the vehicle year, model, and steering connection details before installation. Transfer or replace related steering components as needed during service, and inspect hydraulic lines, tie rod ends, and alignment settings after the rack is installed. Because this assembly uses female inlet and outlet fittings, verify line connection sizes before beginning the job.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are tested for leaks, pressure, noise, and function before release. The manufacturer also identifies this unit as USA engineering approved for direct-fit service.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634773426357,"sku":"HKKN-42-1932","price":779.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421932_Bac4_d302f1fa-8b0c-4934-b035-e01266dd6cac.jpg?v=1774987333"},{"product_id":"pwr-42-1941-rack-and-pinion-assembly","title":"PWR 42-1941 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1941 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThis PWR hydraulic rack and pinion assembly is a direct-fit steering replacement for select Toyota and Lexus applications. Built for the 2003-2009 Toyota 4Runner and 2003-2009 Lexus GX470, PWR 42-1941 is engineered for straightforward installation and consistent steering performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly for power steering systems\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods and gasket\/seal\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e19 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.1 turns lock-to-lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePWR 42-1941 is a hydraulic steering rack built for direct replacement in the 2003-2009 Toyota 4Runner and 2003-2009 Lexus GX470. It features a 1246 mm end-to-end length, two mounting holes, and a steering input shaft with 36 splines and a 19 mm diameter. The unit includes inner tie rods and a gasket or seal, while mounting hardware, mounting brackets, outer tie rods, and brackets are not included.\u003c\/p\u003e\u003cp\u003eThis part cross-references Atlantic Automotive Engineering 3473N and Maval 9378M for the same application. PWR 42-1941 is also listed against OE-style interchange numbers 262624 and 361696.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or looseness\u003c\/li\u003e\n\u003cli\u003eHydraulic steering fluid leaks at the rack\u003c\/li\u003e\n\u003cli\u003eNoise or roughness during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear-related failure in the original rack and pinion assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, shaft diameter, and line fitting sizes before installation. This hydraulic rack uses female inlet and outlet fittings, so confirm line routing and connection style on the vehicle before assembly. Because mounting hardware is not included, reuse or source the required fasteners as needed. Professional alignment is recommended after installation on any Toyota 4Runner or Lexus GX470 steering repair.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function before release. The manufacturer also identifies this unit as USA engineering approved for direct-fit service.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634773655733,"sku":"HKKN-42-1941","price":592.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421941_Bac3.jpg?v=1774987333"},{"product_id":"pwr-42-1960-rack-and-pinion-assembly","title":"PWR 42-1960 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1960 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1960 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Lexus and Toyota applications. It is engineered for straightforward installation and is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.0 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is built for steering systems that require hydraulic assist and OE-style fitment. The unit measures 1118 end to end, uses a 17.4 mm steering input shaft diameter, and features 16 mm inlet and 17 mm outlet line fittings with female ends. It is a practical replacement choice for a Lexus RX330, Lexus RX350, or Toyota Highlander when restoring steering response and hydraulic control. Part number 42-1960 is also referenced as a direct replacement for Cardone New 97-2617 and interchange 4420048090.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2007-2009 Lexus RX350, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004-2007 Toyota Highlander, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004-2006 Lexus RX330, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness in the wheel\u003c\/li\u003e\n\u003cli\u003eHydraulic steering fluid leaks from the rack assembly\u003c\/li\u003e\n\u003cli\u003eNoise or roughness during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWorn internal rack components affecting control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eConfirm spline count, input shaft diameter, and line fitting sizes before installation. This assembly does not include mounting hardware, mounting brackets, or outer tie rods. Inner tie rods are included, and the gasket or seal is included for service preparation. Verify steering system condition and flush contaminated fluid before completing the repair.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and this unit is USA engineering approved. The direct-fit design supports accurate replacement on the listed Lexus RX330, Lexus RX350, and Toyota Highlander applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634773983413,"sku":"HKKN-42-1960","price":726.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421960_Rig5.jpg?v=1774987333"},{"product_id":"pwr-42-1968-rack-and-pinion-assembly","title":"PWR 42-1968 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1968 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1968 is a hydraulic rack and pinion assembly built for direct-fit replacement in select Acura TL and Honda Accord applications. It is engineered and tested for leak resistance, pressure performance, noise control, and function to support accurate steering response.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1090\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings, 16 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR steering rack is built for vehicles that need a hydraulic rack and pinion replacement with OE-style fitment characteristics. Part number 42-1968 is listed for 2004-2008 Acura TL and 2003-2007 Honda Accord, making it a relevant choice for drivers searching for a rack and pinion assembly for Acura TL or Honda Accord steering repair. The assembly includes inner tie rods, gasket or seal, and mounting brackets, while outer tie rods and mounting hardware are not included.\u003c\/p\u003e\u003cp\u003eThis part cross-references CSF 3721 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part May Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness from a worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks at the rack housing or line connections\u003c\/li\u003e\n\u003cli\u003eNoise during steering input caused by internal wear\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eFailed steering rack seals or worn internal components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify fitment by year, make, and model before installation.\u003c\/li\u003e\n\u003cli\u003eInspect hydraulic lines, tie rod ends, and related steering components during replacement.\u003c\/li\u003e\n\u003cli\u003eFlush and bleed the power steering system after installation to remove air and contamination.\u003c\/li\u003e\n\u003cli\u003eConfirm the 36-spline input shaft and 16 mm female line fittings match the vehicle configuration.\u003c\/li\u003e\n\u003cli\u003eUse proper alignment procedures after steering system service.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are tested for leaks, pressure, noise, and function before release. The assembly is also described as USA engineering approved for consistent steering-system service.\u003c\/p\u003e\u003cp\u003eFits 2004-2008 Acura TL and 2003-2007 Honda Accord, hydraulic steering applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634774278325,"sku":"HKKN-42-1968","price":723.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421968_Top4.jpg?v=1774987334"},{"product_id":"pwr-42-1980-rack-and-pinion-assembly","title":"PWR 42-1980 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1980 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-1980 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Ford F-150 and Lincoln Mark LT applications. It is engineered for straightforward installation and is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.3 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1468\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cp\u003eCompatible with 2004-2008 Ford F-150 steering systems and 2006-2008 Lincoln Mark LT steering systems. This PWR 42-1980 rack and pinion assembly is a direct replacement for vehicles using the listed hydraulic steering configuration.\u003c\/p\u003e\u003cp\u003eThis part cross-references Cardone New 97-279 and BBB Industries 101-0214 for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the rack assembly\u003c\/li\u003e\n\u003cli\u003eNoise during steering operation\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear in the hydraulic steering gear assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify line fitting sizes, steering input shaft diameter, and mounting hole layout before installation. Mounting hardware and brackets are not included, so reuse or source the required vehicle-specific components as needed. Inner tie rods are included; outer tie rods are not.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and this unit is USA engineering approved. The included seal helps support a proper hydraulic installation when the system is serviced correctly.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634774507701,"sku":"HKKN-42-1980","price":599.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421980_Bac3.jpg?v=1774987334"},{"product_id":"pwr-42-1994-rack-and-pinion-assembly","title":"PWR 42-1994 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-1994 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-1994 is a hydraulic rack and pinion assembly for steering service on select Ford F-150 and Lincoln Mark LT applications. It is built as a direct-fit replacement to simplify installation and is engineered for consistent steering response, leak resistance, pressure control, and quiet operation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e2 mounting holes\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-1994, is built for steering systems that require hydraulic assist and OE-style fitment. It features an end-to-end length of 1466, a 3.3 lock-to-lock turn ratio, an 18.4 steering input shaft diameter, and female inlet and outlet fittings sized at 13 and 9.5. The assembly includes inner tie rods and seals, while mounting hardware, mounting brackets, and outer tie rods are not included. This part cross-references Gates 22277 for the same application.\u003c\/p\u003e\u003cp\u003eCompatible with 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT steering applications, the PWR 42-1994 supports replacement of worn or leaking steering gear components. It is also referenced by part number 42-1994 for ordering and catalog lookup.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness from worn rack components\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks at the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoise or rough steering feel during turning\u003c\/li\u003e\n\u003cli\u003eUneven steering response caused by internal wear\u003c\/li\u003e\n\u003cli\u003eFailure of the original steering gear to hold pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify line fitting sizes, shaft diameter, and mounting hole layout before installation. Transfer or replace any vehicle-specific components not included with the assembly, and inspect hydraulic lines, tie rod ends, and related steering parts for wear before reassembly. After installation, bleed the power steering system and confirm proper steering operation and fluid level.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function before release. The 42-1994 is also described as USA engineering approved for steering service applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634774573237,"sku":"HKKN-42-1994","price":833.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_421994_Fro.jpg?v=1774987334"},{"product_id":"pwr-42-2009-rack-and-pinion-assembly","title":"PWR 42-2009 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2009 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-2009 is a hydraulic rack and pinion assembly built for direct-fit replacement in select Ford and Mercury steering applications. It is engineered and tested in the USA for leak resistance, pressure performance, noise control, and overall function.\u003c\/p\u003e\u003cp\u003eCompatible With 2002-2005 Ford Explorer and 2002-2005 Mercury Mountaineer, this rack and pinion assembly supports precise steering response for left-hand-drive vehicles where listed.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly for steering system service\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.9 total turns lock to lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePWR part number 42-2009 is a hydraulic steering rack assembly intended for vehicles that require a direct replacement rack with the correct input shaft, line fitting sizes, and steering geometry. The assembly measures 1283 end to end, uses a 18.4 steering input shaft diameter, and includes inner tie rods while omitting outer tie rods, mounting hardware, and mounting brackets. This part cross-references Continental 64247 for the same application.\u003c\/p\u003e\u003cp\u003eFor Ford Explorer and Mercury Mountaineer steering repair, PWR 42-2009 provides a service-ready replacement option that matches the listed fitment and hydraulic connection requirements. It is a practical choice when restoring steering feel, correcting rack wear, or replacing a leaking unit on the specified vehicles.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Fix\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering fluid leaks from a worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eExcessive steering play or loose steering response\u003c\/li\u003e\n\u003cli\u003eNoise or rough operation from internal rack wear\u003c\/li\u003e\n\u003cli\u003eUneven steering effort caused by hydraulic rack failure\u003c\/li\u003e\n\u003cli\u003eRestoration needs on a Ford Explorer or Mercury Mountaineer steering system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses the listed hydraulic steering configuration before installation. Confirm inlet and outlet line fitting sizes, steering input shaft diameter, and end-to-end length against the original unit. Because mounting hardware and mounting brackets are not included, reuse or source the required installation components as needed. Professional alignment is recommended after steering rack replacement.\u003c\/p\u003e\u003cp\u003eFits 2002-2004 Ford Explorer, left hand drive. Fits 2005 Ford Explorer. Fits 2002-2005 Mercury Mountaineer.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that this rack and pinion assembly is USA engineering approved and individually tested for leaks, pressure, noise, and function before release. That testing focus supports consistent steering-system performance for the listed applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634775326901,"sku":"HKKN-42-2009","price":707.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422009_Fro.jpg?v=1774987335"},{"product_id":"pwr-42-2025-rack-and-pinion-assembly","title":"PWR 42-2025 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2025 Rack and Pinion for Acura TSX\u003c\/h2\u003e\u003cp\u003ePWR 42-2025 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Acura TSX models. It is engineered for straightforward installation and is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly for steering system repair\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation on the correct application\u003c\/li\u003e\n\u003cli\u003eFits 2004-2008 Acura TSX\u003c\/li\u003e\n\u003cli\u003eInner tie rods included; outer tie rods not included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003ePart number 42-2025 for catalog and cross-reference use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Overview\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is built for the steering gear and related components category and is intended for Acura TSX rack replacement work where hydraulic steering response and OE-style fitment are required. Key specifications include a 1050 end-to-end length, 2.6 turns lock-to-lock, a 36-spline steering input shaft, and 17.3 mm input shaft diameter. The inlet and outlet line fittings are both female with 16 mm diameter connections. This part cross-references Atlantic Automotive Engineering 3228N for the same application.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness at the wheel\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoise or rough steering operation\u003c\/li\u003e\n\u003cli\u003eUneven steering response during turning\u003c\/li\u003e\n\u003cli\u003eWear-related steering gear replacement on a 2004-2008 Acura TSX\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify hydraulic line fitting size, input shaft spline count, and overall rack length before installation. Mounting hardware and mounting brackets are not included, and outer tie rods are not included. Inner tie rods are included, so inspect related steering components, alignment settings, and hydraulic lines during replacement. Confirm the vehicle is a 2004-2008 Acura TSX before ordering.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that this rack and pinion assembly is USA engineering approved and individually tested for leaks, pressure, noise, and function to help confirm proper operation before installation. Part number 42-2025 is the reference to use when matching this steering assembly to the correct Acura TSX application.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634776342709,"sku":"HKKN-42-2025","price":718.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422025_Fro_3e59bc1c-616b-4619-868d-00fe31c23aea.jpg?v=1774987335"},{"product_id":"pwr-42-2030-rack-and-pinion-assembly","title":"PWR 42-2030 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2030 Rack and Pinion for Hyundai Santa Fe\u003c\/h2\u003e\u003cp\u003ePWR 42-2030 is a hydraulic rack and pinion assembly built for direct-fit replacement service on the 2001-2006 Hyundai Santa Fe. It is engineered for straightforward installation and is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eFits 2001-2006 Hyundai Santa Fe\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e2.9 total turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-2030, is built for steering system replacement on the Hyundai Santa Fe. The hydraulic design supports factory-style steering response, while the direct-fit configuration helps simplify the swap on 2001, 2002, 2003, 2004, 2005, and 2006 Hyundai Santa Fe models. PWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and the unit is USA engineering approved.\u003c\/p\u003e\u003cp\u003eFitment: Fits 2001-2006 Hyundai Santa Fe, N\/A.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 262413, 972413) for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Steering Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or looseness\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the steering rack\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eRough or inconsistent steering feel\u003c\/li\u003e\n\u003cli\u003eWorn internal rack components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify steering shaft spline count, line fitting sizes, and overall length before installation. This assembly includes inner tie rods and a gasket or seal, but mounting hardware, mounting brackets, outer tie rods, and related hardware are not included. Always inspect the hydraulic lines, alignment settings, and surrounding steering components during replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR 42-2030 is 100% tested for leaks, pressure, noise, and function. The unit is also described by the manufacturer as USA engineering approved for consistent steering system service.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634776408245,"sku":"HKKN-42-2030","price":485.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422030_Bac3.jpg?v=1774987335"},{"product_id":"pwr-42-2043-rack-and-pinion-assembly","title":"PWR 42-2043 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2043 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-2043 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Nissan and Suzuki applications. It is engineered for straightforward installation and is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cp\u003eCompatible with 2005-2020 Nissan Frontier, 2005-2015 Nissan Xterra, 2005-2012 Nissan Pathfinder, and 2009-2012 Suzuki Equator, this rack and pinion assembly supports precise steering response in vehicles that rely on hydraulic steering gear. The PWR 42-2043 is a practical OE-style replacement for worn steering components.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eLeak, pressure, noise, and function tested\u003c\/li\u003e\n\u003cli\u003eIncludes gasket or seal\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.4 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePWR 42-2043 is a hydraulic steering rack assembly with a 1164 end-to-end length, 3 mounting holes, and a 17.4 mm steering input shaft diameter. It uses female inlet and outlet line fittings with 14 mm inlet and 16 mm outlet connections. This part cross-references Anchor 3453 for the same application. For buyers searching for a Nissan Frontier rack and pinion assembly, Nissan Xterra steering gear replacement, or Nissan Pathfinder hydraulic steering rack, this unit matches the listed fitment and steering configuration.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or looseness\u003c\/li\u003e\n\u003cli\u003eFluid leakage from a worn steering rack\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eFailure of the original hydraulic rack and pinion assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify steering shaft spline count, line fitting sizes, and mounting points before installation. Outer tie rods are not included, and mounting hardware is not included. Transfer or replace related steering components as needed during service, and inspect the hydraulic system for contamination or leaks before returning the vehicle to service. Fits 2005-2020 Nissan Frontier, N\/A. Fits 2005-2015 Nissan Xterra, N\/A. Fits 2005-2012 Nissan Pathfinder, N\/A. Fits 2009-2012 Suzuki Equator, N\/A.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are engineered in the USA and individually tested for leaks, pressure, noise, and function to help confirm proper operation before installation.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634776539317,"sku":"HKKN-42-2043","price":740.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422043_Bac3.jpg?v=1774987336"},{"product_id":"pwr-42-2071-rack-and-pinion-assembly","title":"PWR 42-2071 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2071 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003ePWR 42-2071 is a hydraulic rack and pinion assembly built for direct-fit replacement in select Chevrolet, Buick, and Pontiac applications. It is engineered for straightforward installation and is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e2 mounting hole design\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1238 mm\u003c\/li\u003e\n\u003cli\u003eTotal turns lock to lock: 2.3\u003c\/li\u003e\n\u003cli\u003eSteering input shaft diameter: 19.9 mm\u003c\/li\u003e\n\u003cli\u003eInlet fitting diameter: 18 mm, female\u003c\/li\u003e\n\u003cli\u003eOutlet fitting diameter: 16 mm, female\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is a hydraulic steering gear replacement for vehicles using the listed OE-style steering configuration. The PWR 42-2071 is built for direct fitment and includes inner tie rods, along with gasket or seal components, to support a clean steering system service. It cross-references Cardone New 97-1003 and BBB Industries 103-0170 for the same application.\u003c\/p\u003e\u003cp\u003eCompatible With 2000-2001 Chevrolet Impala, 2000-2003 Chevrolet Monte Carlo, 2003-2005 Buick Century, 2003-2004 Buick Regal, 2004-2008 Pontiac Grand Prix with Non-Variable Effort Steering (N40), 2004-2005 Chevrolet Monte Carlo without FE4 Suspension, 2005-2009 Buick Allure, 2005-2009 Buick LaCrosse, 2006-2007 Chevrolet Impala, 2006-2007 Chevrolet Monte Carlo, 2008-2009 Chevrolet Impala with FE1, FE2 or 7B3 Suspension, 2010-2011 Chevrolet Impala without FE3, and 2002-2005 Chevrolet Impala without FE4 Suspension.\u003c\/p\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or looseness\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the steering gear\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear-related steering rack failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify steering system configuration, suspension code, and OE dimensions before installation. This assembly uses female inlet and outlet line fittings and does not include mounting hardware or mounting brackets. Confirm the steering input shaft diameter and line fitting sizes match the vehicle before service. Professional alignment is recommended after rack and pinion replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function, and this unit is USA engineering approved. The part number is 42-2071.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634776834229,"sku":"HKKN-42-2071","price":589.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422071_Fro.jpg?v=1774987336"},{"product_id":"pwr-42-2081-rack-and-pinion-assembly","title":"PWR 42-2081 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2081 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-2081 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Chevrolet, Pontiac, and Suzuki small cars. It is engineered for straightforward installation and is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cp\u003eCompatible With 2004-2011 Chevrolet Aveo, 2006-2011 Chevrolet Aveo5, 2007-2010 Pontiac G3, 2009 Pontiac G3 Wave, 2005-2008 Pontiac Wave, 2005-2007 Pontiac Wave5, and 2004-2010 Suzuki Swift+.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eRegular grade replacement component\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1043\u003c\/li\u003e\n\u003cli\u003e3.0 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eSteering input shaft diameter: 15.7\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits 2004-2011 Chevrolet Aveo, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2006-2011 Chevrolet Aveo5, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2007-2010 Pontiac G3, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2009 Pontiac G3 Wave, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2005-2008 Pontiac Wave, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2005-2007 Pontiac Wave5, N\/A\u003c\/li\u003e\n\u003cli\u003eFits 2004-2010 Suzuki Swift+, N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat This Part Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness at the wheel\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leakage from the steering gear\u003c\/li\u003e\n\u003cli\u003eRough, inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eNoise or binding from a worn rack and pinion unit\u003c\/li\u003e\n\u003cli\u003eFailed internal seals or worn steering components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify line fitting sizes, steering input shaft diameter, and overall length before installation. Mounting hardware and mounting brackets are not included, and outer tie rods are not included. Inner tie rods are included, so inspect related steering and suspension parts during service. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are engineered in the USA and tested for leaks, pressure, noise, and function. Part number 42-2081 is built to support reliable steering performance in the listed Chevrolet Aveo, Pontiac Wave\/G3, and Suzuki Swift+ applications.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634776932533,"sku":"HKKN-42-2081","price":502.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422081_Fro.jpg?v=1774987336"},{"product_id":"pwr-42-2098-rack-and-pinion-assembly","title":"PWR 42-2098 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2098 Rack and Pinion for Tacoma\u003c\/h2\u003e\u003cp\u003ePWR 42-2098 is a hydraulic rack and pinion assembly for 2005-2014 Toyota Tacoma applications. It is built as a direct-fit replacement to simplify installation and restore steering response in the Tacoma steering system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier replacement\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e17.3 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.5 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1266\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Details\u003c\/h2\u003e\u003cp\u003eCompatible with 2005-2014 Toyota Tacoma steering applications. This PWR 42-2098 rack and pinion assembly matches the Tacoma platform across the listed model years and is intended for hydraulic steering systems.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFits 2005-2014 Toyota Tacoma, N\/A\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis rack and pinion assembly is engineered for steering replacement work where the original unit has wear, leakage, or inconsistent assist. PWR states that its racks and gears are USA engineering approved and fully tested for leaks, pressure, noise, and function before release. The PWR 42-2098 also cross-references Cardone New 97-2647 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Replacement Reasons\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering fluid leaks from the rack assembly\u003c\/li\u003e\n\u003cli\u003eExcessive steering play or loose on-center feel\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent hydraulic assist\u003c\/li\u003e\n\u003cli\u003eWorn internal rack components affecting control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eVerify hydraulic line fitting sizes, input shaft spline count, and overall rack dimensions before installation. Mounting hardware and mounting brackets are not included, so reuse or source the required vehicle-specific hardware as needed. Inner tie rods are included; outer tie rods are not.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR tests each rack and pinion assembly for leaks, pressure, noise, and function to confirm proper operation before it leaves the factory. The direct-fit design supports a cleaner replacement process on Toyota Tacoma steering repairs.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634778243253,"sku":"HKKN-42-2098","price":733.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422098_Fro.jpg?v=1774987337"},{"product_id":"pwr-42-2099-rack-and-pinion-assembly","title":"PWR 42-2099 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2099 Rack and Pinion for Grand Cherokee\u003c\/h2\u003e\u003cp\u003ePWR 42-2099 is a hydraulic rack and pinion assembly for the 2005-2010 Jeep Grand Cherokee. It is built as a direct-fit replacement to simplify installation and is engineered for steering performance, leak control, pressure stability, noise control, and function testing.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eTwo mounting holes\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly is made for steering service on the Jeep Grand Cherokee and is identified by part number 42-2099. It uses a hydraulic design with an 18.6 steering input shaft diameter, 18 mm inlet fitting, and 16 mm outlet fitting. The assembly measures 1338 end to end and has 3.0 turns lock to lock, supporting precise steering response in the 2005-2010 Jeep Grand Cherokee platform. This part cross-references Cardone New 97-381 for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Issues This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering fluid leaks from a worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eExcessive steering play or inconsistent on-center feel\u003c\/li\u003e\n\u003cli\u003eNoise during steering input caused by internal wear\u003c\/li\u003e\n\u003cli\u003eRough or uneven steering response in the front suspension system\u003c\/li\u003e\n\u003cli\u003eFailure of internal hydraulic seals or steering gear components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eCompatible with 2005-2010 Jeep Grand Cherokee, steering application. Mounting hardware and mounting brackets are not included. Outer tie rods are not included, while inner tie rods are included. Verify line fitting sizes, shaft diameter, and mounting points against the original unit before installation. After installation, bleed the hydraulic system and inspect for leaks, proper assist, and centered steering wheel position.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are fully tested for leaks, pressure, noise, and function before release. The assembly is also described as USA engineering approved for consistent steering service.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634780635317,"sku":"HKKN-42-2099","price":785.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422099_Fro.jpg?v=1774987337"},{"product_id":"pwr-42-2118-rack-and-pinion-assembly","title":"PWR 42-2118 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2118 Rack and Pinion for Honda Ridgeline\u003c\/h2\u003e\u003cp\u003ePWR 42-2118 is a hydraulic rack and pinion assembly for the 2006-2014 Honda Ridgeline. It is built as a direct-fit replacement to simplify installation and restore steering response in the Honda Ridgeline steering system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003e100% tested for leaks, pressure, noise, and function\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e3.3 turns lock to lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThis PWR rack and pinion assembly, part number 42-2118, is engineered for the 2006-2014 Honda Ridgeline and uses a hydraulic steering design. It features a 1344 end-to-end length, 17.3 steering input shaft diameter, and 16 mm female inlet and outlet fittings for a direct replacement application. The assembly includes inner tie rods and a gasket or seal, while mounting hardware, mounting brackets, and outer tie rods are not included.\u003c\/p\u003e\u003cp\u003eThis part cross-references Anchor 3326 for the same application. It also cross-references 8050N for related replacement use. For Honda Ridgeline steering repair, PWR 42-2118 provides a direct-fit option built around the original vehicle configuration.\u003c\/p\u003e\u003ch2\u003eCommon Problems This Part Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering play or looseness in the Honda Ridgeline\u003c\/li\u003e\n\u003cli\u003eFluid leakage from a worn rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoisy or rough hydraulic steering operation\u003c\/li\u003e\n\u003cli\u003eUneven steering response during turning\u003c\/li\u003e\n\u003cli\u003eWear in the original rack, seals, or internal steering components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, line fitting size, and overall rack dimensions before installation. Transfer or replace any required external components not included with the assembly, and inspect hydraulic lines, tie rods, and steering linkage for wear while the system is apart. After installation, bleed the power steering system and confirm proper steering wheel center and alignment.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function before release. This rack and pinion assembly is USA engineering approved and built for direct-fit replacement use on the 2006-2014 Honda Ridgeline.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634780864693,"sku":"HKKN-42-2118","price":705.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422118_Fro.jpg?v=1774987337"},{"product_id":"pwr-42-2204-rack-and-pinion-assembly","title":"PWR 42-2204 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2204 Rack and Pinion for Hummer H3\u003c\/h2\u003e\u003cp\u003ePWR 42-2204 is a hydraulic rack and pinion assembly built for direct-fit replacement service. It is engineered for the 2006-2008 Hummer H3 with a 14mm diameter tie rod, making it a focused solution for steering repair on this application.\u003c\/p\u003e\u003cp\u003eFor buyers searching for a Hummer H3 rack and pinion assembly, this unit is built around the original steering geometry and connection points. The PWR 42-2204 is 100% tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier installation\u003c\/li\u003e\n\u003cli\u003eFits 2006-2008 Hummer H3, with 14mm diameter tie rod\u003c\/li\u003e\n\u003cli\u003eIncludes inner tie rods\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eEnd-to-end length: 1208\u003c\/li\u003e\n\u003cli\u003eLock-to-lock turns: 3.25\u003c\/li\u003e\n\u003cli\u003eSteering input shaft diameter: 16.8\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eThe PWR 42-2204 rack and pinion assembly is a hydraulic steering component intended for direct replacement on the 2006, 2007, and 2008 Hummer H3. It uses female inlet and outlet line fittings, includes inner tie rods, and is supplied with mounting brackets for a cleaner service replacement. This part number, 42-2204, is built to match the steering system requirements of the listed Hummer H3 application.\u003c\/p\u003e\u003cp\u003eThis part cross-references ACI 361316 for the same application. It also cross-references Maval 95486M for the same application.\u003c\/p\u003e\u003ch2\u003eCommon Steering Issues It Can Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or loose steering feel\u003c\/li\u003e\n\u003cli\u003eFluid leakage from the rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eNoise during steering input\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eWear-related steering performance loss on a Hummer H3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the vehicle uses the 14mm diameter tie rod specification before installation. Confirm line fitting sizes, steering shaft diameter, and mounting points against the original unit before removal. Because mounting hardware is not included, reuse or source the required hardware as needed for the vehicle. After installation, perform a full alignment and inspect the hydraulic system for leaks and proper steering operation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function. The manufacturer also identifies this unit as USA engineering approved.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634781257909,"sku":"HKKN-42-2204","price":704.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422204_Fro.jpg?v=1774987338"},{"product_id":"pwr-42-2235-rack-and-pinion-assembly","title":"PWR 42-2235 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2235 Rack and Pinion for Acura MDX\u003c\/h2\u003e\u003cp\u003ePWR 42-2235 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Acura MDX models. It is engineered for straightforward installation and is tested for leaks, pressure, noise, and function before release.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier replacement\u003c\/li\u003e\n\u003cli\u003eUSA engineering approved\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e17.4 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003e3.3 turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings, 16 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and application\u003c\/h2\u003e\u003cp\u003eCompatible with 2003-2006 Acura MDX steering systems. Fits 2003 Acura MDX, N\/A. Fits 2004 Acura MDX, N\/A. Fits 2005 Acura MDX, N\/A. Fits 2006 Acura MDX, N\/A. This part cross-references Cardone New 97-2722 for the same application.\u003c\/p\u003e\u003cp\u003eUse PWR 42-2235 when replacing a worn hydraulic steering rack on an Acura MDX with symptoms tied to steering effort, fluid leakage, or inconsistent steering response. The assembly measures 1114 end-to-end and uses two mounting holes with no mounting brackets or outer tie rods included.\u003c\/p\u003e\u003ch2\u003eCommon issues this part can address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePower steering fluid leaks from the rack assembly\u003c\/li\u003e\n\u003cli\u003eExcessive steering play or loose on-center feel\u003c\/li\u003e\n\u003cli\u003eNoise during steering input from internal wear\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eFailure of internal rack seals or hydraulic components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes and quality assurance\u003c\/h2\u003e\u003cp\u003eVerify spline count, shaft diameter, and hydraulic line fitting size before installation. Transfer or source any required mounting hardware separately, and inspect the steering system, fluid condition, and tie rod ends during replacement. PWR states that each rack and pinion is tested for leaks, pressure, noise, and function, with direct-fit engineering intended to simplify installation on the correct Acura MDX application.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634781323445,"sku":"HKKN-42-2235","price":688.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422235_Fro.jpg?v=1774987338"},{"product_id":"pwr-42-2255-rack-and-pinion-assembly","title":"PWR 42-2255 Rack and Pinion Assembly","description":"\u003ch2\u003ePWR 42-2255 Rack and Pinion Assembly\u003c\/h2\u003e\u003cp\u003eThe PWR 42-2255 is a hydraulic rack and pinion assembly for steering service on select Toyota and Lexus SUVs. It is built as a direct-fit replacement to simplify installation and is engineered for 2003-2007 Lexus LX470 and 2003-2007 Toyota Land Cruiser applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHydraulic rack and pinion assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for easier replacement\u003c\/li\u003e\n\u003cli\u003eInner tie rods included\u003c\/li\u003e\n\u003cli\u003eGasket or seal included\u003c\/li\u003e\n\u003cli\u003e36-spline steering input shaft\u003c\/li\u003e\n\u003cli\u003e19 mm steering input shaft diameter\u003c\/li\u003e\n\u003cli\u003eFemale inlet and outlet line fittings\u003c\/li\u003e\n\u003cli\u003e3.3 turns lock-to-lock\u003c\/li\u003e\n\u003cli\u003eCompatible with 2003-2007 Lexus LX470 and 2003-2007 Toyota Land Cruiser\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003ePWR Part Number 42-2255 is a hydraulic steering rack and pinion assembly designed for direct replacement in the 2003-2007 Lexus LX470 and 2003-2007 Toyota Land Cruiser. The unit features a 1177 end-to-end length, 2 mounting holes, a 36-spline input shaft, and female inlet and outlet fittings sized at 16 mm and 17 mm. Inner tie rods are included, along with a gasket or seal for service installation. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Resolve\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExcessive steering play or loose steering feel\u003c\/li\u003e\n\u003cli\u003eHydraulic fluid leaks from the steering rack\u003c\/li\u003e\n\u003cli\u003eUneven or inconsistent steering response\u003c\/li\u003e\n\u003cli\u003eNoise or binding during steering operation\u003c\/li\u003e\n\u003cli\u003eWear-related steering rack failure on LX470 and Land Cruiser models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify spline count, shaft diameter, line fitting size, and mounting points before installation. Transfer or replace related steering components as needed during service, and inspect hydraulic lines, tie rod ends, and alignment settings after the rack is installed. Confirm the vehicle is a 2003-2007 Lexus LX470 or 2003-2007 Toyota Land Cruiser before ordering PWR 42-2255.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003ePWR states that its racks and gears are tested for leaks, pressure, noise, and function, and that this unit is USA engineering approved. Those checks support consistent steering performance for the LX470 and Land Cruiser applications listed for Part Number 42-2255.\u003c\/p\u003e","brand":"PWR","offers":[{"title":"Default Title","offer_id":43634781847733,"sku":"HKKN-42-2255","price":673.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/9R_422255_Fro.jpg?v=1774987338"}],"url":"https:\/\/www.partcatalog.com\/collections\/pwr.oembed","provider":"PartCatalog","version":"1.0","type":"link"}