{"title":"Tire and Wheel \u003e Sensors","description":"\u003cp\u003eTPMS sensors are battery-powered transmitters mounted inside each wheel that continuously monitor tire pressure and alert the driver when a tire drops 25% or more below the recommended PSI — a federal requirement on all passenger vehicles sold in the U.S. after 2008. Sensors typically last 7–10 years or 100,000 miles before the internal battery dies, though corrosion, physical damage during a tire change, or a dead battery will trigger early replacement. Each sensor is programmed with a unique ID that must be registered to your vehicle's ECU, so fitment goes beyond just the right thread pitch or valve stem diameter — you need the correct frequency (315 MHz or 433 MHz depending on make\/model\/year) and a compatible protocol. OEM sensors are plug-and-play but cost $50–$100 each; quality aftermarket units from Schrader, VDO, or Sensata run $20–$50 and work reliably when properly programmed. Programmable multi-application sensors are a smart choice for shops servicing a wide range of vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTPMS warning light stays on after inflating tires to spec.\u003c\/strong\u003e If tires are properly inflated but the dashboard sensor icon won't go out after driving 10+ minutes, one or more sensors has likely failed or its battery has died.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTPMS light blinks for 60–90 seconds at startup, then stays solid.\u003c\/strong\u003e A flashing-then-solid warning sequence specifically indicates a system malfunction — often a dead sensor battery or a sensor that's lost communication with the ECU.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo pressure reading for one wheel in the vehicle's tire pressure display.\u003c\/strong\u003e Many vehicles show individual PSI per corner; a missing or dashed reading for one wheel points directly to a failed sensor on that corner.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor physically damaged during a tire dismount or road hazard.\u003c\/strong\u003e The valve stem and sensor body are vulnerable during tire changes — a cracked housing, bent stem, or sheared mounting band means the sensor needs to be replaced before remounting.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor battery age exceeds 7–10 years.\u003c\/strong\u003e Even without an active fault code, proactively replacing sensors on a high-mileage vehicle during a tire replacement job avoids a return visit once the battery finally dies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo TPMS sensors need to be reprogrammed after replacement?\u003c\/strong\u003e\n  Yes — every replacement sensor must be programmed with a new unique ID and then registered (relearned) to the vehicle's ECU. OEM sensors come pre-programmed for a specific vehicle. Aftermarket programmable sensors require a TPMS tool to clone or write the ID before installation. Most vehicles have a relearn procedure that takes 5–20 minutes.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAre aftermarket TPMS sensors as reliable as OEM?\u003c\/strong\u003e\n  Quality aftermarket sensors from Schrader (EZ-sensor), Continental\/VDO, or Sensata are OE-grade and used by major dealerships. Avoid no-name sensors under $10 — they often use cheaper batteries and inconsistent RF transmission. For mixed fleets or shop inventory, multi-application programmable sensors cover thousands of vehicle applications from a single SKU.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eHow much does TPMS sensor replacement cost, and what else should be replaced at the same time?\u003c\/strong\u003e\n  Expect $25–$100 per sensor in parts, plus $20–$75 in labor per wheel if shop-installed. Always replace the TPMS service kit — valve core, cap, nut, and grommet seal — at the same time, since the rubber grommet and aluminum components corrode. Kits run $2–$5 each and prevent valve stem leaks after remounting.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"denso-550-0103-tire-pressure-monitoring-system-sensor","title":"Denso 550-0103 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Lexus and Toyota Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0103 provides accurate, real-time tire pressure data for select Lexus, Toyota, Pontiac, and Scion models. Designed to maintain optimal tire performance and safety, this electric-powered sensor ensures direct monitoring and seamless integration with your vehicle's onboard system.\u003c\/p\u003e\u003ch2\u003eKey Features of the Denso TPMS Sensor 550-0103\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent sensor operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for precise tire pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission to vehicle system\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal for complete replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Overview of the Denso OE Manufactured TPMS Sensor\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor, part number 550-0103, is engineered to provide direct tire pressure monitoring by transmitting real-time data to your vehicle’s monitoring system. The clamp-in mounting method ensures a secure fit within the tire assembly, while the included mounting hardware and gasket or seal facilitate a proper and reliable installation. Compatible with a wide range of Lexus and Toyota models such as the Camry, Highlander, RX350, and Tacoma, as well as select Pontiac and Scion vehicles, this sensor supports accurate pressure monitoring essential for vehicle safety and tire longevity.\u003c\/p\u003e\u003cp\u003eThe OE Manufactured product line from Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This ensures that the 550-0103 TPMS sensor integrates seamlessly with your vehicle’s existing systems, maintaining the integrity and performance expected from the original manufacturer components.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure monitoring on Lexus RX450h and Toyota 4Runner\u003c\/li\u003e\n\u003cli\u003eResolves TPMS warning light activation due to faulty sensors\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear caused by incorrect pressure readings\u003c\/li\u003e\n\u003cli\u003eSupports safe driving by maintaining proper tire inflation data\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or non-functional sensors in Pontiac and Scion models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the sensor is compatible with your specific vehicle make and model before installation\u003c\/li\u003e\n\u003cli\u003eUse the included mounting hardware and gasket\/seal to prevent air leaks\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for clamp-in mounting\u003c\/li\u003e\n\u003cli\u003eAfter installation, perform a TPMS system reset or relearn procedure as required by the vehicle\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for detailed sensor replacement instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured TPMS Sensor 550-0103 is built to meet original equipment standards, providing reliable performance and durability. While specific warranty details may vary, Denso products typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446075490485,"sku":"BBNF-550-0103","price":47.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500103_Fro_18b27865-ab3f-4b75-9fca-0038eb52558b.jpg?v=1774734203"},{"product_id":"denso-550-0104-tire-pressure-monitoring-system-sensor","title":"Denso 550-0104 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Toyota Tacoma\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0104 is designed specifically for Toyota Tacoma models. This direct monitoring sensor provides real-time pressure signal transmission to help maintain optimal tire pressure and vehicle safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for accurate pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing original equipment quality parts that meet or exceed factory specifications. This ensures that the 550-0104 TPMS sensor integrates seamlessly with your Toyota Tacoma’s existing systems, maintaining the vehicle’s safety and performance standards.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-0104 TPMS sensor is engineered to provide direct and accurate tire pressure monitoring for Toyota Tacoma vehicles. Powered electrically, it continuously transmits real-time pressure data to the vehicle’s onboard system, allowing drivers to respond promptly to any pressure changes. The clamp-in mounting method ensures a secure fit within the tire assembly, and the included mounting hardware and gasket or seal facilitate proper installation and prevent air leaks.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure monitoring for Toyota Tacoma\u003c\/li\u003e\n\u003cli\u003ePrevents tire damage caused by underinflation or overinflation\u003c\/li\u003e\n\u003cli\u003eHelps avoid potential safety hazards related to tire pressure\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle safety regulations\u003c\/li\u003e\n\u003cli\u003eReplaces faulty or damaged TPMS sensors to restore system functionality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-0104 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method simplifies sensor placement, but care should be taken to properly seat the gasket or seal to prevent leaks. It is recommended to use the included mounting hardware and verify sensor compatibility with the Toyota Tacoma model year before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring reliable performance and durability. While specific warranty details may vary, these sensors typically come with manufacturer-backed coverage to protect against defects in materials and workmanship.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446075588789,"sku":"BBNF-550-0104","price":47.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500104_Fro.jpg?v=1774734204"},{"product_id":"denso-550-0105-tire-pressure-monitoring-system-sensor","title":"Denso 550-0105 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Lexus, Toyota, Subaru, and More\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0105 provides accurate, real-time tire pressure data for a range of vehicles including Lexus, Toyota, Subaru, and Scion models. Designed to maintain optimal tire performance and safety, this sensor ensures your vehicle’s TPMS system functions correctly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for precise pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method with included hardware\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-0105 is engineered to match the exact fit and function required by vehicle manufacturers, ensuring compatibility and reliability for Lexus, Toyota, Subaru, and Scion vehicles.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor 550-0105 operates on an electric power source and uses a direct monitoring system to provide accurate tire pressure data. The sensor transmits real-time pressure signals to the vehicle’s onboard computer, allowing for immediate detection of pressure changes. Its clamp-in mounting method simplifies installation, and the included mounting hardware and gasket ensure a secure and leak-free fit. Compatible with a wide range of models such as the Lexus RX350, Toyota Camry, Subaru BRZ, and Scion iM, this sensor supports proper tire maintenance and safety monitoring.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure monitoring on Lexus RX350, Toyota Corolla, and Subaru BRZ\u003c\/li\u003e\n\u003cli\u003eReplaces faulty or damaged TPMS sensors causing warning lights\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle safety standards for tire pressure\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear due to undetected low pressure\u003c\/li\u003e\n\u003cli\u003eSupports fuel efficiency by maintaining correct tire inflation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso TPMS sensor 550-0105 requires removal of the tire from the wheel. The clamp-in mounting method is straightforward, and the included hardware and gasket should be used to ensure a proper seal. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation. Compatible with Lexus, Toyota, Subaru, and Scion models, verify fitment before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring durability and reliable performance. This sensor includes all necessary mounting components and seals for a complete replacement. Warranty coverage details should be confirmed with the parts provider or vehicle manufacturer.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446076047541,"sku":"BBNF-550-0105","price":46.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500105_Fro.jpg?v=1774734204"},{"product_id":"denso-550-0106-tire-pressure-monitoring-system-sensor","title":"Denso 550-0106 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Lexus and Toyota Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0106 is designed to provide accurate tire pressure readings for select Lexus and Toyota models. This sensor helps maintain optimal tire performance and safety by monitoring tire pressure in real time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE Manufactured quality ensuring precise fit and function\u003c\/li\u003e\n\u003cli\u003eCompatible with Lexus Avalon, RX350, RX450h, GX460, Land Cruiser, and Toyota Camry, Tacoma models\u003c\/li\u003e\n\u003cli\u003ePart number 550-0106 for easy identification and replacement\u003c\/li\u003e\n\u003cli\u003eDirect replacement sensor for factory-installed TPMS systems\u003c\/li\u003e\n\u003cli\u003eSupports accurate tire pressure monitoring to enhance vehicle safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line from Denso focuses on producing parts that meet original equipment specifications. This ensures that the TPMS sensor 550-0106 matches the quality and performance standards of the factory-installed components on Lexus and Toyota vehicles. Using an OE Manufactured sensor helps maintain the integrity of the vehicle’s tire pressure monitoring system without compromising reliability.\u003c\/p\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor 550-0106 is engineered to fit a range of Lexus and Toyota models, including the Avalon, Camry, GX460, Land Cruiser, RX350, RX450h, and Tacoma. It is designed to replace the original sensor seamlessly, providing accurate tire pressure data to the vehicle’s onboard monitoring system. Proper tire pressure is critical for vehicle handling, fuel efficiency, and tire longevity, making this sensor an essential component for maintaining your vehicle’s performance.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This TPMS Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInaccurate or no tire pressure readings on the dashboard\u003c\/li\u003e\n\u003cli\u003eTPMS warning light illuminated due to sensor failure\u003c\/li\u003e\n\u003cli\u003eLoss of tire pressure monitoring after tire or wheel replacement\u003c\/li\u003e\n\u003cli\u003eIntermittent sensor signal or communication errors\u003c\/li\u003e\n\u003cli\u003eMaintaining compliance with vehicle safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the sensor is compatible with your specific Lexus or Toyota model and year\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damaging the sensor during installation\u003c\/li\u003e\n\u003cli\u003eReprogram or relearn the sensor with the vehicle’s TPMS system after installation\u003c\/li\u003e\n\u003cli\u003eCheck tire pressure and sensor function after installation to confirm proper operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured TPMS sensor 550-0106 is built to meet original equipment standards, ensuring reliable performance and durability. While specific warranty details may vary, Denso parts typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446076145845,"sku":"BBNF-550-0106","price":45.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500106_Fro.jpg?v=1774734204"},{"product_id":"denso-550-0201-tire-pressure-monitoring-system-sensor","title":"Denso 550-0201 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Honda Pilot Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0201 is designed to provide accurate, real-time tire pressure data for Honda Pilot models. This direct monitoring sensor ensures your vehicle maintains optimal tire pressure, enhancing safety and performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect tire pressure monitoring for precise readings\u003c\/li\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission to the vehicle’s system\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method with included hardware\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to match the exact requirements of Honda Pilot vehicles, ensuring compatibility and reliable performance. Using parts from the OE Manufactured line helps maintain the integrity of your vehicle’s systems with components designed for direct fit and function.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-0201 TPMS sensor is an electric-powered device that directly monitors tire pressure and transmits real-time data to the vehicle’s onboard system. Its clamp-in mounting method simplifies installation, and the included mounting hardware and gasket ensure a secure and airtight fit. This sensor is specifically compatible with Honda Pilot models, providing accurate pressure readings to help maintain tire health and vehicle safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDetects underinflated or overinflated tires promptly\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear caused by improper pressure\u003c\/li\u003e\n\u003cli\u003eHelps avoid potential tire blowouts due to pressure loss\u003c\/li\u003e\n\u003cli\u003eSupports fuel efficiency by maintaining correct tire pressure\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle safety monitoring systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-0201 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method allows for straightforward sensor placement, and the included gasket or seal must be properly positioned to prevent air leaks. It is recommended to use the provided mounting hardware and verify sensor compatibility with the Honda Pilot model year before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring durability and reliable performance. While specific warranty details may vary, these sensors typically come with manufacturer-backed coverage to protect against defects in materials and workmanship.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446076506293,"sku":"BBNF-550-0201","price":48.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500201_Fro.jpg?v=1774734204"},{"product_id":"denso-550-0203-tire-pressure-monitoring-system-sensor","title":"Denso 550-0203 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Acura TSX Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0203 is designed specifically for Acura TSX models. This direct monitoring sensor provides real-time pressure signal transmission to help maintain optimal tire pressure and vehicle safety.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for accurate tire pressure readings\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method with included hardware\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for secure installation\u003c\/li\u003e\n\u003cli\u003eCompatible with Acura TSX vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is part of that line, ensuring compatibility and reliability for Acura TSX owners who require precise tire pressure monitoring solutions that integrate seamlessly with their vehicle’s systems.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-0203 TPMS sensor uses an electric power source to deliver direct, real-time tire pressure data to the vehicle’s monitoring system. Its clamp-in mounting method simplifies installation while the included mounting hardware and gasket ensure a secure and leak-free fit. Designed for Acura TSX models, this sensor supports accurate pressure monitoring to help maintain tire performance and safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDetects low tire pressure to prevent uneven tire wear\u003c\/li\u003e\n\u003cli\u003eAlerts driver to potential tire leaks or punctures\u003c\/li\u003e\n\u003cli\u003eHelps maintain fuel efficiency by ensuring proper tire inflation\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems dependent on accurate tire pressure data\u003c\/li\u003e\n\u003cli\u003eReplaces faulty or damaged TPMS sensors in Acura TSX vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-0203 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method allows for straightforward sensor placement. Ensure the included gasket or seal is properly positioned to prevent air leaks. Use the provided mounting hardware to secure the sensor firmly. After installation, a TPMS relearn procedure may be necessary to synchronize the sensor with the vehicle’s monitoring system.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-0203 is built to meet original equipment standards, providing reliable performance and durability. While specific warranty details may vary, Denso parts typically come with manufacturer-backed warranties that cover defects in materials and workmanship. Refer to the product documentation or manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446077194421,"sku":"BBNF-550-0203","price":58.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500203_Fro.jpg?v=1774734205"},{"product_id":"denso-550-0204-tire-pressure-monitoring-system-sensor","title":"Denso 550-0204 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Honda Accord, CR-V, Fit, and S2000\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0204 provides accurate, real-time tire pressure data for select Honda models. Designed to maintain optimal tire performance, this sensor supports direct pressure monitoring with electric power source technology.\u003c\/p\u003e\u003ch2\u003eKey Features of the Denso 550-0204 TPMS Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect tire pressure monitoring for precise readings\u003c\/li\u003e\n\u003cli\u003eElectric power source ensures consistent signal transmission\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket for a complete fit\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission enhances safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Denso OE Manufactured TPMS Sensor\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor, part number 550-0204, is engineered specifically for Honda vehicles including the Accord, CR-V, Fit, and S2000. As part of the OE Manufactured product line, it meets original equipment standards for quality and fitment. The sensor uses a direct monitoring system powered electrically to deliver accurate tire pressure data directly to the vehicle’s onboard computer. Its clamp-in mounting method simplifies installation while the included mounting hardware and gasket ensure a secure and leak-free fit. Real-time pressure signal transmission helps maintain tire safety and performance by alerting drivers promptly to pressure changes.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintaining accurate tire pressure monitoring on Honda Accord, CR-V, Fit, and S2000\u003c\/li\u003e\n\u003cli\u003eReplacing faulty or damaged TPMS sensors to restore system functionality\u003c\/li\u003e\n\u003cli\u003ePreventing uneven tire wear caused by incorrect tire pressure\u003c\/li\u003e\n\u003cli\u003eEnhancing vehicle safety by providing timely tire pressure alerts\u003c\/li\u003e\n\u003cli\u003eEnsuring compliance with tire pressure monitoring regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-0204 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method allows for straightforward sensor placement. Use the included mounting hardware and gasket to ensure a proper seal and prevent air leaks. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure accurate communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAs part of the Denso OE Manufactured line, this TPMS sensor adheres to strict quality standards consistent with original equipment specifications. The sensor is designed for durability and reliable performance in Honda vehicles. Warranty coverage details should be confirmed with the point of purchase or manufacturer documentation.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446077358261,"sku":"BBNF-550-0204","price":57.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500204_Fro.jpg?v=1774734205"},{"product_id":"denso-550-0205-tire-pressure-monitoring-system-sensor","title":"Denso 550-0205 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Honda CR-V\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0205 is designed to provide accurate, real-time tire pressure data for Honda CR-V models. This direct monitoring sensor ensures your vehicle maintains optimal tire pressure, enhancing safety and performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect tire pressure monitoring for precise readings\u003c\/li\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission to the vehicle’s system\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket for a complete fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing sensors that meet original equipment specifications. This ensures compatibility and reliability for vehicles like the Honda CR-V. The 550-0205 TPMS sensor is engineered to match factory standards, providing a seamless replacement that integrates with your vehicle’s existing systems.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor uses a direct monitoring system powered electrically to deliver accurate tire pressure data in real time. The clamp-in mounting method secures the sensor firmly to the wheel, while the included mounting hardware and gasket simplify installation and ensure a proper seal. Designed specifically for Honda CR-V models, part number 550-0205 supports consistent pressure signal transmission, helping maintain tire safety and efficiency.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDetects underinflated or overinflated tires promptly\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear caused by incorrect pressure\u003c\/li\u003e\n\u003cli\u003eHelps maintain fuel efficiency by ensuring proper tire inflation\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems by providing accurate tire data\u003c\/li\u003e\n\u003cli\u003eReplaces faulty or damaged TPMS sensors on Honda CR-V\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-0205 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method allows for a secure fit, and the included gasket and mounting hardware should be used to ensure a proper seal and sensor stability. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure accurate readings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring durability and reliable performance. This sensor is backed by Denso’s quality assurance processes, providing confidence in its fitment and function for Honda CR-V vehicles. Please refer to Denso’s warranty terms for specific coverage details.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446077489333,"sku":"BBNF-550-0205","price":50.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500205_Fro.jpg?v=1774734205"},{"product_id":"denso-550-0206-tire-pressure-monitoring-system-sensor","title":"Denso 550-0206 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Acura and Honda Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0206 provides accurate, real-time tire pressure data for Acura and Honda models. Designed for direct monitoring, this sensor ensures your vehicle’s safety systems receive precise pressure readings to maintain optimal tire performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for accurate pressure measurement\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to match the exact fit and function required by Acura and Honda vehicles, ensuring compatibility and reliable performance without modification.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-0206 TPMS sensor is designed to provide direct tire pressure monitoring by transmitting real-time pressure signals to the vehicle’s onboard system. Its electric power source supports continuous operation, while the clamp-in mounting method simplifies installation and ensures a secure fit. The included mounting hardware and gasket or seal help maintain an airtight connection, preventing leaks and sensor malfunctions. This sensor is compatible with Acura MDX, Pilot, RDX, and TSX models, making it a precise replacement part for maintaining factory tire pressure monitoring functionality.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure readings on Acura MDX, Pilot, RDX, and TSX\u003c\/li\u003e\n\u003cli\u003eResolves TPMS warning light caused by faulty or damaged sensors\u003c\/li\u003e\n\u003cli\u003ePrevents inaccurate tire pressure alerts that can affect vehicle safety\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with tire pressure monitoring system requirements\u003c\/li\u003e\n\u003cli\u003eReplaces sensors damaged during tire service or sensor battery failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-0206 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method allows for straightforward sensor placement using the included hardware and gasket. It is recommended to have the sensor installed and programmed by a professional technician to ensure proper communication with the vehicle’s TPMS system. After installation, verify sensor functionality and reset the TPMS system as needed according to the vehicle manufacturer’s instructions.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso OE Manufactured TPMS sensors are built to meet original equipment standards, providing reliable performance and durability. While specific warranty details may vary, these sensors typically come with a manufacturer-backed warranty covering defects in materials and workmanship. Using a genuine OE Manufactured sensor like the 550-0206 helps maintain the integrity of your Acura or Honda’s tire pressure monitoring system.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446077587637,"sku":"BBNF-550-0206","price":47.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500206_Fro.jpg?v=1774734206"},{"product_id":"denso-550-0304-tire-pressure-monitoring-system-sensor","title":"Denso 550-0304 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Nissan and INFINITI Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0304 provides accurate, real-time tire pressure data for select Nissan and INFINITI models. Designed to maintain optimal tire performance, this direct TPMS sensor ensures your vehicle’s safety systems receive precise pressure readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct pressure measurement\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission: Yes, for immediate alerts\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp in for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes Mounting Hardware and Gasket\/Seal for complete setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-0304 is engineered to match the performance and durability standards required by Nissan and INFINITI vehicles, ensuring compatibility and reliable function within the vehicle’s tire pressure monitoring system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor 550-0304 is designed for direct monitoring of tire pressure, transmitting real-time data to the vehicle’s onboard system. Its electric power source supports consistent sensor operation, while the clamp-in mounting method allows for secure and straightforward installation. The included mounting hardware and gasket or seal ensure a proper fit and prevent air leaks, maintaining sensor accuracy and tire integrity. Compatible with Nissan models such as 370Z, Cube, Juke, Murano, Rogue, Rogue Select, X-Trail, and INFINITI models including EX35, FX35, FX45, FX50, G35, and G37, this sensor supports a wide range of vehicles requiring precise tire pressure monitoring.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure readings for Nissan 370Z and INFINITI FX35\u003c\/li\u003e\n\u003cli\u003eResolves TPMS warning light issues caused by faulty sensors\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear due to incorrect pressure monitoring\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems dependent on tire pressure data\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with tire pressure monitoring regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso TPMS sensor 550-0304 requires removal of the tire from the wheel to access the valve stem. The clamp-in mounting method simplifies sensor attachment, and the included hardware and gasket should be used to ensure a secure, airtight fit. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure proper communication and functionality.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAs part of the Denso OE Manufactured product line, this TPMS sensor meets stringent quality standards consistent with original equipment parts. The sensor is built to provide reliable performance and durability under normal operating conditions. Warranty coverage details should be confirmed at the point of purchase, typically including protection against manufacturing defects.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446077882549,"sku":"BBNF-550-0304","price":105.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500304_Fro.jpg?v=1774734206"},{"product_id":"denso-550-0305-tire-pressure-monitoring-system-sensor","title":"Denso 550-0305 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Infiniti and Nissan Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-0305 provides accurate, real-time tire pressure data for select Infiniti and Nissan models. Designed to maintain optimal tire performance, this electric-powered sensor ensures direct monitoring and seamless integration with your vehicle's onboard system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct pressure measurement\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission: Yes, for immediate alerts\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp-in installation\u003c\/li\u003e\n\u003cli\u003eIncludes Mounting Hardware and Gasket\/Seal for secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-0305 is engineered to provide reliable performance and compatibility with specific Infiniti and Nissan models, ensuring proper fitment and function as intended by the vehicle manufacturer.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor 550-0305 is designed for direct tire pressure monitoring, transmitting real-time pressure data to your vehicle’s monitoring system. The electric power source supports consistent sensor operation, while the clamp-in mounting method allows for straightforward installation. Included mounting hardware and gasket or seal ensure a secure and airtight fit, preventing leaks and sensor malfunctions. Compatible with a range of Infiniti and Nissan vehicles including the 370Z, EX35, FX35, G37, Juke, LEAF, QX70, and others, this sensor maintains accurate tire pressure readings essential for vehicle safety and performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure monitoring on Infiniti 370Z and Nissan Juke models\u003c\/li\u003e\n\u003cli\u003eReplaces faulty or damaged TPMS sensors causing warning lights\u003c\/li\u003e\n\u003cli\u003eEnsures real-time pressure data transmission for improved safety\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear due to incorrect pressure readings\u003c\/li\u003e\n\u003cli\u003eMaintains compliance with vehicle safety standards for tire monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClamp-in mounting requires proper alignment to avoid sensor damage\u003c\/li\u003e\n\u003cli\u003eUse included gasket or seal to ensure airtight installation\u003c\/li\u003e\n\u003cli\u003eVerify sensor compatibility with your specific Infiniti or Nissan model before installation\u003c\/li\u003e\n\u003cli\u003eReset the vehicle’s TPMS system after sensor replacement to ensure accurate readings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured TPMS sensor 550-0305 is built to meet original equipment standards, providing reliable performance and durability. This sensor includes all necessary mounting hardware and seals for proper installation. Please consult the product documentation or manufacturer for specific warranty details.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446079094965,"sku":"BBNF-550-0305","price":53.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5500305_Fro_d8003e8a-4e9e-4456-9132-97858ed4fa52.jpg?v=1774734206"},{"product_id":"denso-550-1019-tire-pressure-monitoring-system-sensor","title":"Denso 550-1019 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Hyundai and Kia Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-1019 provides accurate, real-time tire pressure data for select Hyundai and Kia models. Designed to maintain optimal tire performance, this electric sensor ensures direct monitoring and seamless integration with your vehicle's system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct pressure measurement\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission: Yes, for immediate alerts\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp-in installation\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: Yes, for straightforward setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-1019 is engineered to provide reliable performance and durability, ensuring compatibility and proper function with Hyundai and Kia vehicles such as the Azera, Elantra, Magentis, Optima, Rondo, Santa Fe, Sedona, and Veracruz.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-1019 TPMS sensor uses an electric power source to provide direct monitoring of tire pressure, transmitting real-time data to your vehicle’s onboard system. Its clamp-in mounting method allows for secure installation, and the included mounting hardware simplifies the replacement process. This sensor is designed specifically for Hyundai and Kia models, ensuring accurate pressure readings and timely alerts to help maintain tire safety and efficiency.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDetects underinflated or overinflated tires promptly\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear caused by improper pressure\u003c\/li\u003e\n\u003cli\u003eHelps maintain fuel efficiency by ensuring correct tire pressure\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems by providing accurate tire data\u003c\/li\u003e\n\u003cli\u003eEliminates false TPMS warnings due to sensor malfunction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-1019 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method is compatible with the original valve stem design, and the included mounting hardware should be used to ensure a secure fit. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure proper communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-1019 is built to meet original equipment standards, providing reliable performance and durability. While specific warranty details may vary, Denso parts typically come with a limited warranty covering defects in materials and workmanship to ensure customer confidence in product quality.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446079586485,"sku":"BBNF-550-1019","price":49.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5501019_Fro.jpg?v=1774734206"},{"product_id":"denso-550-1901-tire-pressure-monitoring-system-sensor","title":"Denso 550-1901 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Select European Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-1901 provides accurate, real-time tire pressure data for a range of premium European cars. Designed for direct monitoring, this electric sensor ensures your Audi, BMW, Mercedes-Benz, Porsche, and other compatible models maintain optimal tire safety and performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct measurement of tire pressure\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission: Yes, for immediate alerts\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp-in installation\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: Yes, for straightforward setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to the same standards as the components installed during vehicle assembly, ensuring compatibility and reliability for models such as the Audi A6, BMW 328i, Mercedes-Benz S500, Porsche 911, and others.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-1901 TPMS sensor is an electric, clamp-in sensor designed for direct tire pressure monitoring. It transmits real-time pressure data to the vehicle’s onboard system, allowing drivers to maintain proper tire inflation and improve safety. The included mounting hardware simplifies installation, making it suitable for vehicles including Audi, Bentley, BMW, Ferrari, Maserati, Maybach, Mercedes-Benz, Porsche, and Volkswagen models. This sensor supports a wide range of models such as the BMW 330i, Mercedes-Benz 740iL, Porsche Boxster, and Volkswagen Phaeton.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors\u003c\/li\u003e\n\u003cli\u003eRestores accurate tire pressure monitoring alerts\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear due to incorrect inflation\u003c\/li\u003e\n\u003cli\u003eHelps maintain fuel efficiency by ensuring proper tire pressure\u003c\/li\u003e\n\u003cli\u003eSupports compliance with vehicle safety regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation requires removal of the tire from the wheel to access the valve stem. The clamp-in mounting method secures the sensor firmly in place. Since mounting hardware is included, ensure all components are used to maintain sensor integrity. After installation, a TPMS reset or relearn procedure may be necessary depending on the vehicle make and model.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-1901 is built to meet original equipment standards, ensuring durability and performance. While specific warranty details vary by distributor, Denso parts typically come with a limited warranty covering defects in materials and workmanship. Verify warranty terms at the point of purchase.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446079684789,"sku":"BBNF-550-1901","price":167.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5501901_Fro.jpg?v=1774734207"},{"product_id":"denso-550-1904-tire-pressure-monitoring-system-sensor","title":"Denso 550-1904 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Select European Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-1904 provides accurate, real-time tire pressure data for a range of Audi, BMW, Ferrari, Maybach, Mercedes-Benz, and Porsche models. Designed for direct monitoring, this electric sensor ensures your vehicle maintains optimal tire pressure for safety and performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct measurement of tire pressure\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission: Yes, for immediate alerts\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp-in installation\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: Yes, for straightforward setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-1904 is engineered to provide precise pressure readings and seamless integration with the vehicle’s onboard systems, ensuring compatibility and reliability for premium European vehicles.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor 550-1904 is designed to directly monitor tire pressure and transmit real-time data to the vehicle’s monitoring system. Its electric power source supports consistent sensor operation, while the clamp-in mounting method allows for secure installation. The included mounting hardware simplifies the replacement process. Compatible with models such as the BMW 3 Series (323Ci, 325i, 328i, 330i), Audi A6 Quattro, Mercedes-Benz SL55 AMG, Porsche Boxster, and Ferrari 575 M Maranello, this sensor supports a wide range of premium vehicles requiring precise tire pressure management.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure readings to improve vehicle safety\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear caused by underinflation or overinflation\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle TPMS warning system requirements\u003c\/li\u003e\n\u003cli\u003eHelps avoid potential fuel efficiency loss due to improper tire pressure\u003c\/li\u003e\n\u003cli\u003eSupports timely detection of slow leaks or tire damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso TPMS sensor 550-1904 requires removal of the tire from the wheel to access the valve stem. The clamp-in mounting method secures the sensor to the valve stem, and the included hardware should be used to ensure proper fitment. After installation, a TPMS relearn procedure may be necessary to synchronize the sensor with the vehicle’s monitoring system. It is recommended to have installation performed by a qualified technician familiar with the specific vehicle model.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring reliable performance and durability. While specific warranty details may vary, Denso parts typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446079914165,"sku":"BBNF-550-1904","price":190.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5501904_Fro_4e3ad2c8-9dd8-4d42-b443-0b5176b56879.jpg?v=1774734207"},{"product_id":"denso-550-1911-tire-pressure-monitoring-system-sensor","title":"Denso 550-1911 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Luxury and Performance Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-1911 provides accurate, real-time tire pressure data for a range of high-end vehicles including BMW, Audi, Porsche, and Tesla. Designed for direct monitoring, this electric sensor ensures your vehicle maintains optimal tire pressure for safety and performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct pressure measurement\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission: Yes, for immediate alerts\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp-in installation\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: Yes, for straightforward setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-1911 is engineered to provide precise pressure readings and seamless integration with vehicle systems, ensuring compatibility and reliability for models such as the BMW 328i, Audi A4 Quattro, and Porsche 911.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor 550-1911 uses an electric power source to provide direct monitoring of tire pressure, transmitting real-time data to the vehicle’s onboard system. The clamp-in mounting method allows for secure installation, and the included mounting hardware simplifies the replacement process. Compatible with a wide range of luxury and performance vehicles including Aston Martin, Ferrari, Lamborghini, Maserati, Mini, Rolls-Royce, and Volkswagen, this sensor supports models like the BMW 335i xDrive, Audi A6 Quattro, and Tesla Model S.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure readings to improve vehicle safety\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear caused by underinflation or overinflation\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle TPMS warning system requirements\u003c\/li\u003e\n\u003cli\u003eHelps avoid potential tire damage and blowouts\u003c\/li\u003e\n\u003cli\u003eSupports fuel efficiency by maintaining optimal tire pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso TPMS sensor 550-1911 requires removal of the tire from the wheel to access the valve stem. The clamp-in mounting method is compatible with original equipment valve stems, and the included hardware ensures a secure fit. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure proper communication and functionality.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-1911 is built to meet original equipment standards, providing reliable performance and durability. While specific warranty details may vary, Denso parts typically come with manufacturer-backed warranties that cover defects in materials and workmanship, supporting long-term use in compatible vehicles.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446079979701,"sku":"BBNF-550-1911","price":76.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5501911_Fro.jpg?v=1774734207"},{"product_id":"denso-550-1913-tire-pressure-monitoring-system-sensor","title":"Denso 550-1913 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Volkswagen CC and Tiguan\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-1913 provides accurate, real-time tire pressure data for Volkswagen CC and Tiguan models. Designed to maintain optimal tire safety and performance, this sensor ensures direct monitoring with electric power source efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect monitor type for precise tire pressure readings\u003c\/li\u003e\n\u003cli\u003eElectric power source for consistent signal transmission\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method with included hardware\u003c\/li\u003e\n\u003cli\u003eCompatible with Volkswagen CC and Tiguan vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-1913 is engineered to integrate seamlessly with Volkswagen vehicles, providing reliable performance and durability consistent with original parts.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-1913 TPMS sensor is an electric-powered device that directly monitors tire pressure and transmits real-time data to the vehicle’s onboard system. Its clamp-in mounting method simplifies installation and ensures a secure fit, with all necessary mounting hardware included. This sensor is specifically designed for Volkswagen CC and Tiguan models, ensuring compatibility and accurate pressure monitoring to help maintain vehicle safety and tire longevity.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure monitoring for Volkswagen CC and Tiguan\u003c\/li\u003e\n\u003cli\u003ePrevents tire damage caused by underinflation or overinflation\u003c\/li\u003e\n\u003cli\u003eHelps avoid warning light malfunctions related to faulty sensors\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems dependent on tire pressure data\u003c\/li\u003e\n\u003cli\u003eReduces risk of uneven tire wear and potential blowouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-1913 TPMS sensor requires removal of the tire from the wheel to access the valve stem. The clamp-in mounting method allows for a secure fit, and the included hardware ensures all components are ready for installation. It is recommended to have the sensor programmed or relearned to the vehicle’s system after installation to ensure proper communication and functionality.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-1913 is built to meet original equipment standards, providing reliable performance and durability. While specific warranty details may vary, Denso parts typically come with a manufacturer-backed warranty to cover defects in materials and workmanship, supporting long-term use in Volkswagen CC and Tiguan vehicles.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446080733365,"sku":"BBNF-550-1913","price":78.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5501913_Fro.jpg?v=1774734208"},{"product_id":"denso-550-1918-tire-pressure-monitoring-system-sensor","title":"Denso 550-1918 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for BMW, Mini, and Porsche Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-1918 offers precise, real-time tire pressure monitoring for select BMW, Mini, and Porsche models. Designed to maintain optimal tire performance and safety, this sensor integrates seamlessly with your vehicle's existing systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct measurement of tire pressure\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission ensures immediate alerts\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp in for secure installation\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included for convenience\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to provide reliable performance and compatibility with the specific requirements of BMW, Mini, and Porsche vehicles, ensuring proper fit and function.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-1918 TPMS sensor is an electric-powered, direct-type sensor that transmits real-time tire pressure data to your vehicle’s monitoring system. Its clamp-in mounting method allows for a secure and straightforward installation, and the included mounting hardware simplifies the replacement process. This sensor is compatible with a wide range of BMW models such as the 320i, 328i, 335i, 528i, 535i, 550i, 640i, 650i, 740i, 750i, and 760Li, as well as Mini Cooper variants and Porsche models including the Cayenne, Macan, and Panamera.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure readings for improved safety\u003c\/li\u003e\n\u003cli\u003ePrevents false TPMS warning lights caused by faulty sensors\u003c\/li\u003e\n\u003cli\u003eSupports fuel efficiency by ensuring proper tire inflation\u003c\/li\u003e\n\u003cli\u003eHelps avoid uneven tire wear due to incorrect pressure\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle safety monitoring systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-1918 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method provides a secure fit, and the included mounting hardware should be used to ensure proper sensor attachment. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to guarantee accurate communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring durability and reliable performance. While specific warranty details may vary, Denso parts typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446080897205,"sku":"BBNF-550-1918","price":63.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5501918_Fro.jpg?v=1774734208"},{"product_id":"denso-550-2504-tire-pressure-monitoring-system-sensor","title":"Denso 550-2504 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Dodge and Mitsubishi Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-2504 provides accurate, real-time tire pressure data for select Dodge and Mitsubishi models. Designed to maintain optimal tire performance, this sensor supports vehicle safety and efficiency by delivering direct pressure readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct pressure measurement\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission ensures up-to-date tire status\u003c\/li\u003e\n\u003cli\u003eSnap-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal for a complete fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing sensors that meet original equipment specifications. This ensures that the 550-2504 TPMS sensor matches the quality and performance standards expected by Dodge and Mitsubishi manufacturers, providing a reliable replacement part that integrates seamlessly with your vehicle’s existing systems.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-2504 TPMS sensor is engineered to provide direct tire pressure monitoring, transmitting real-time data to your vehicle’s onboard system. Its electric power source supports consistent sensor function, while the snap-in mounting method simplifies installation and ensures a secure fit. The included mounting hardware and gasket or seal help maintain sensor integrity and prevent air leaks. This sensor is compatible with Dodge Dakota, Dodge Ram 1500, Dodge Ram 2500, and Mitsubishi Raider models, making it a precise replacement for maintaining tire safety and performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure readings for Dodge Dakota and Ram trucks\u003c\/li\u003e\n\u003cli\u003eReplaces faulty or damaged TPMS sensors causing warning lights\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle safety monitoring systems\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear due to incorrect pressure data\u003c\/li\u003e\n\u003cli\u003eSupports fuel efficiency by maintaining proper tire inflation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-2504 sensor requires removal of the tire from the wheel. The snap-in mounting method allows for straightforward sensor placement, and the included hardware and gasket ensure a proper seal. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure accurate communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring durability and reliable performance. While specific warranty details may vary, Denso products typically come with manufacturer-backed coverage to protect against defects in materials and workmanship.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446081126581,"sku":"BBNF-550-2504","price":42.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5502504_Fro_4d8f29ef-1e6f-43b8-8e12-be86251a3624.jpg?v=1774734208"},{"product_id":"denso-550-3002-tire-pressure-monitoring-system-sensor","title":"Denso 550-3002 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Hyundai and Kia Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3002 provides accurate, real-time tire pressure data for select Hyundai and Kia models. Designed to maintain optimal tire performance and safety, this electric-powered sensor ensures direct monitoring and seamless integration with your vehicle's onboard system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for precise pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal for a complete fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured line focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to provide reliable performance and compatibility with Hyundai and Kia vehicles, ensuring that replacement parts maintain the integrity of the original system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3002 TPMS sensor is designed to directly monitor tire pressure and transmit real-time data to the vehicle’s monitoring system. Its electric power source supports continuous operation, while the clamp-in mounting method allows for a secure and straightforward installation. The included mounting hardware and gasket or seal ensure a proper fit and help maintain the sensor’s durability and accuracy over time. This sensor is compatible with a range of Hyundai and Kia models, including the Hyundai Elantra, Sonata, Santa Fe, and Kia Sorento, Cadenza, and Genesis Coupe.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure monitoring for Hyundai Elantra and Kia Sorento vehicles\u003c\/li\u003e\n\u003cli\u003eResolves TPMS warning light issues caused by faulty or damaged sensors\u003c\/li\u003e\n\u003cli\u003eEnsures real-time pressure data transmission to prevent unsafe driving conditions\u003c\/li\u003e\n\u003cli\u003eReplaces sensors damaged during tire service or sensor battery failure\u003c\/li\u003e\n\u003cli\u003eMaintains factory-level sensor performance for Hyundai Sonata and Kia Cadenza\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3002 TPMS sensor requires removal of the tire from the wheel to access the valve stem. The clamp-in mounting method simplifies securing the sensor to the wheel. Ensure the included gasket or seal is properly positioned to prevent air leaks. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure proper communication and functionality.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAs part of the Denso OE Manufactured product line, the 550-3002 TPMS sensor is built to meet original equipment standards for quality and reliability. This sensor includes all necessary mounting hardware and seals to support a durable installation. Warranty coverage details should be confirmed with the parts provider or vehicle manufacturer to ensure compliance with specific terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446082437301,"sku":"BBNF-550-3002","price":46.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503002_Fro.jpg?v=1774734209"},{"product_id":"denso-550-3004-tire-pressure-monitoring-system-sensor","title":"Denso 550-3004 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Honda Accord Crosstour and CR-V\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3004 provides accurate, real-time tire pressure data for Honda Accord Crosstour, CR-V, and Crosstour models. Designed to maintain optimal tire performance and safety, this direct TPMS sensor ensures your vehicle’s tire pressure is constantly monitored and transmitted efficiently.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent sensor operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for precise tire pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission to vehicle system\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal for proper fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-3004 is engineered to match the exact requirements of Honda vehicles, ensuring compatibility and reliable performance. Using OE Manufactured parts helps maintain the integrity of your vehicle’s systems with components designed for precise fit and function.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3004 TPMS sensor is an electric-powered device that directly monitors tire pressure and transmits real-time data to the vehicle’s onboard system. Its clamp-in mounting method allows for a secure and straightforward installation, while the included mounting hardware and gasket ensure a proper seal to prevent air leaks. This sensor is specifically compatible with Honda Accord Crosstour, CR-V, and Crosstour models, providing accurate pressure monitoring to help maintain tire safety and performance.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This TPMS Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncorrect or inconsistent tire pressure readings\u003c\/li\u003e\n\u003cli\u003eTPMS warning light activation due to sensor failure\u003c\/li\u003e\n\u003cli\u003eAir leaks caused by damaged or missing seals\u003c\/li\u003e\n\u003cli\u003eLoss of real-time pressure data transmission\u003c\/li\u003e\n\u003cli\u003eSensor malfunction from improper mounting or hardware issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3004 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method simplifies securing the sensor to the valve stem. Ensure the included gasket or seal is properly positioned to prevent air leaks. Use the provided mounting hardware to maintain sensor stability. After installation, recalibrate the TPMS system according to the vehicle manufacturer’s instructions to ensure accurate pressure readings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring reliable performance and durability. This sensor includes all necessary components for installation and is tested for quality and accuracy. Please refer to Denso’s warranty policy for specific coverage details related to the 550-3004 TPMS sensor.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446082633909,"sku":"BBNF-550-3004","price":55.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503004_Fro.jpg?v=1774734210"},{"product_id":"denso-550-3005-tire-pressure-monitoring-system-sensor","title":"Denso 550-3005 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Nissan Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3005 provides accurate, real-time tire pressure data for Nissan models including Altima, Frontier, Maxima, Sentra, TITAN, Versa, and Xterra. Designed to maintain optimal tire performance and safety, this sensor ensures your vehicle’s TPMS system functions correctly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect monitor type for precise pressure readings\u003c\/li\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Features of the Denso TPMS Sensor 550-3005\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor uses a direct monitoring system that transmits real-time tire pressure signals to your vehicle’s onboard computer, allowing for immediate detection of pressure changes. The electric power source ensures reliable sensor function without interruption. The clamp-in mounting method simplifies installation while providing a secure fit. Included mounting hardware and gasket or seal help maintain sensor integrity and prevent air leaks, contributing to accurate pressure monitoring.\u003c\/p\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-3005 is part of that line, ensuring compatibility and performance consistent with Nissan’s original components. Choosing an OE Manufactured sensor supports proper fitment and reliable operation across Nissan Altima, Frontier, Maxima, Sentra, TITAN, Versa, and Xterra models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure monitoring for Nissan Altima and other compatible models\u003c\/li\u003e\n\u003cli\u003ePrevents false TPMS warnings caused by faulty sensors\u003c\/li\u003e\n\u003cli\u003eHelps avoid uneven tire wear due to incorrect pressure readings\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety by ensuring timely pressure alerts\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or malfunctioning TPMS sensors in Nissan Frontier, Maxima, Sentra, TITAN, Versa, and Xterra\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso TPMS sensor 550-3005 requires removal of the tire from the wheel to access the valve stem. The clamp-in mounting method included with the sensor simplifies securing the unit in place. Use the provided gasket or seal to prevent air leaks and ensure sensor accuracy. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure proper communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-3005 is built to meet original equipment standards, ensuring durability and reliable performance. While specific warranty details may vary, Denso parts typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446084206773,"sku":"BBNF-550-3005","price":48.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503005_Fro.jpg?v=1774734210"},{"product_id":"denso-550-3007-tire-pressure-monitoring-system-sensor","title":"Denso 550-3007 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Nissan and Infiniti Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3007 provides accurate, real-time tire pressure data for select Nissan and Infiniti models. Designed to maintain optimal tire performance, this electric sensor ensures your vehicle’s safety systems receive direct pressure readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct pressure measurement\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission: Yes, for immediate alerts\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp-in installation\u003c\/li\u003e\n\u003cli\u003eIncludes Mounting Hardware and Gasket\/Seal for secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to provide reliable performance and compatibility with Nissan and Infiniti vehicles, ensuring seamless integration with existing vehicle systems.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3007 TPMS sensor is an electric-powered, direct monitoring device that transmits real-time tire pressure signals to your vehicle’s onboard system. Its clamp-in mounting method allows for straightforward installation, and the included mounting hardware and gasket ensure a secure and airtight fit. This sensor is compatible with Nissan Altima, JX35, Maxima, Murano, Pathfinder, and Infiniti Q50, Q60, QX60 models, providing precise pressure monitoring to help maintain tire health and vehicle safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure readings for Nissan Altima and Infiniti Q50\u003c\/li\u003e\n\u003cli\u003ePrevents false TPMS warnings caused by faulty sensors\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems by providing direct pressure data\u003c\/li\u003e\n\u003cli\u003eHelps avoid uneven tire wear and potential blowouts\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with tire pressure monitoring regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3007 sensor requires removal of the tire from the wheel to access the valve stem. The clamp-in mounting method simplifies sensor replacement, and the included gasket and mounting hardware should be used to ensure a proper seal. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure accurate communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAs part of the Denso OE Manufactured product line, this TPMS sensor is built to meet original equipment standards for durability and performance. While specific warranty details may vary, Denso typically offers coverage against manufacturing defects to provide confidence in product reliability.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446084894901,"sku":"BBNF-550-3007","price":51.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503007_Fro.jpg?v=1774734210"},{"product_id":"denso-550-3008-tire-pressure-monitoring-system-sensor","title":"Denso 550-3008 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Chrysler, Dodge, Jeep, and Mitsubishi\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3008 provides accurate, real-time tire pressure data for a range of Chrysler, Dodge, Jeep, and Mitsubishi vehicles. Designed to maintain optimal tire performance and safety, this sensor ensures direct monitoring and seamless integration with your vehicle's onboard system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for precise pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission to vehicle system\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method with included hardware\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-3008 is engineered to provide reliable performance and compatibility with specific vehicle models, ensuring a direct replacement that maintains the integrity of your vehicle’s tire pressure monitoring system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3008 TPMS sensor is an electric-powered device that directly monitors tire pressure and transmits real-time data to the vehicle’s monitoring system. Its clamp-in mounting method simplifies installation while the included mounting hardware and gasket ensure a secure and leak-free fit. This sensor is compatible with various Chrysler, Dodge, Jeep, and Mitsubishi models, including the Chrysler 200, 300, Pacifica, and Town \u0026amp; Country; Dodge Avenger, Caliber, Charger, Caravan, and Magnum; Jeep Compass, Grand Cherokee, Liberty, Patriot, and Wrangler; as well as Mitsubishi Lancer, Outlander, Mirage, and i-MiEV.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure readings for improved safety\u003c\/li\u003e\n\u003cli\u003ePrevents false TPMS warning lights caused by faulty sensors\u003c\/li\u003e\n\u003cli\u003eSupports compliance with tire pressure monitoring regulations\u003c\/li\u003e\n\u003cli\u003eHelps avoid uneven tire wear due to incorrect pressure\u003c\/li\u003e\n\u003cli\u003eEnsures proper sensor fitment for specific Chrysler, Dodge, Jeep, and Mitsubishi models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3008 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method allows for straightforward sensor replacement. Use the included mounting hardware and gasket to ensure a proper seal and prevent air leaks. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure accurate communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso OE Manufactured TPMS sensors are built to meet original equipment standards, providing reliable performance and durability. This sensor includes all necessary mounting components to facilitate proper installation. Warranty coverage details should be confirmed with the parts provider or vehicle manufacturer to ensure protection against defects.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446084960437,"sku":"BBNF-550-3008","price":43.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503008_Fro.jpg?v=1774734211"},{"product_id":"denso-550-3009-tire-pressure-monitoring-system-sensor","title":"Denso 550-3009 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Acura NSX, Honda Pilot, and Ridgeline\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3009 provides accurate, real-time tire pressure data for Acura NSX, Honda Pilot, and Ridgeline models. Designed to maintain optimal tire performance and safety, this sensor integrates seamlessly with your vehicle’s monitoring system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type ensures precise pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission for immediate alerts\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method with included hardware for secure installation\u003c\/li\u003e\n\u003cli\u003eGasket or seal included to maintain sensor integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to match the exact requirements of Acura and Honda vehicles, ensuring compatibility and reliable performance. Using OE Manufactured parts like the 550-3009 helps maintain your vehicle’s safety systems as intended by the manufacturer.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3009 TPMS sensor is an electric-powered device that directly monitors tire pressure and transmits data in real time to your vehicle’s onboard system. Its clamp-in mounting method simplifies installation while the included mounting hardware and gasket ensure a secure and airtight fit. This sensor is specifically designed for Acura NSX, Honda Pilot, and Ridgeline models, providing accurate pressure readings to help prevent tire-related issues and maintain driving safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDetects underinflated or overinflated tires promptly\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear caused by improper pressure\u003c\/li\u003e\n\u003cli\u003eHelps avoid potential tire blowouts or failures\u003c\/li\u003e\n\u003cli\u003eMaintains fuel efficiency by ensuring correct tire pressure\u003c\/li\u003e\n\u003cli\u003eSupports compliance with vehicle safety monitoring systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3009 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method allows for straightforward sensor placement using the included hardware and gasket. It is recommended to have the sensor installed and programmed by a professional technician to ensure proper communication with the vehicle’s TPMS system. After installation, verify sensor functionality through the vehicle’s dashboard display.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring durability and reliable performance. While specific warranty details may vary, these sensors typically come with a manufacturer-backed warranty covering defects in materials and workmanship. Using a genuine OE Manufactured sensor like the 550-3009 helps maintain the integrity of your vehicle’s tire pressure monitoring system.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446085025973,"sku":"BBNF-550-3009","price":47.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503009_Fro.jpg?v=1774734211"},{"product_id":"denso-550-3010-tire-pressure-monitoring-system-sensor","title":"Denso 550-3010 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Acura ILX, MDX, RDX, and TLX\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3010 provides accurate, real-time tire pressure data for Acura ILX, MDX, RDX, and TLX models. Designed to maintain optimal tire performance and safety, this sensor integrates seamlessly with your vehicle’s monitoring system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type ensures precise pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission for immediate alerts\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal for a complete fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured line focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to match the exact standards required by Acura vehicles, ensuring compatibility and reliable performance. Using an OE Manufactured sensor like the 550-3010 helps maintain the integrity of your vehicle’s tire pressure monitoring system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor 550-3010 operates on an electric power source and features a direct monitoring system that transmits real-time tire pressure data to your Acura’s onboard computer. The clamp-in mounting method provides a secure fit within the wheel assembly, and the included mounting hardware and gasket ensure proper sealing and installation. This sensor is specifically designed for Acura ILX, MDX, RDX, and TLX models, making it a precise replacement part that supports vehicle safety and tire maintenance.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This TPMS Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInaccurate or no tire pressure readings on Acura ILX, MDX, RDX, and TLX\u003c\/li\u003e\n\u003cli\u003eTPMS warning light activation due to sensor failure\u003c\/li\u003e\n\u003cli\u003eLoss of real-time pressure signal transmission\u003c\/li\u003e\n\u003cli\u003eDamaged or worn mounting hardware causing sensor instability\u003c\/li\u003e\n\u003cli\u003eAir leaks from faulty gasket or seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3010 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method simplifies sensor placement, but ensure the included gasket or seal is properly positioned to prevent air leaks. Use the provided mounting hardware to secure the sensor firmly. After installation, recalibrate the TPMS system according to Acura’s specifications to ensure accurate pressure monitoring.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensors are built to meet original equipment standards, providing reliable performance and durability. This sensor includes all necessary components for installation and is backed by Denso’s quality control processes. Please refer to Denso or your vehicle manufacturer for specific warranty details related to this part number 550-3010.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446085157045,"sku":"BBNF-550-3010","price":56.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503010_Fro_fc86ce0f-9636-447a-9094-8538b208cfbd.jpg?v=1774734211"},{"product_id":"denso-550-3011-tire-pressure-monitoring-system-sensor","title":"Denso 550-3011 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Acura MDX, RDX, and RLX\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3011 provides accurate, real-time tire pressure data for Acura MDX, RDX, and RLX models. Designed to maintain optimal tire performance and safety, this sensor integrates seamlessly with your vehicle's monitoring system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type ensures precise pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission for immediate alerts\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method with included hardware\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to match the exact fit and function required by Acura vehicles, ensuring reliable performance and compatibility with the vehicle’s tire pressure monitoring system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3011 TPMS sensor is an electric-powered, direct-type sensor designed for clamp-in installation. It transmits real-time tire pressure data directly to the vehicle’s monitoring system, allowing drivers to maintain proper tire inflation and enhance safety. The included mounting hardware and gasket ensure a secure and leak-free fit, reducing the risk of sensor failure or inaccurate readings. This sensor is specifically compatible with Acura MDX, RDX, and RLX models, providing a precise replacement part that supports the vehicle’s original tire pressure monitoring capabilities.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors on Acura MDX, RDX, and RLX\u003c\/li\u003e\n\u003cli\u003eRestores accurate tire pressure monitoring to prevent uneven tire wear\u003c\/li\u003e\n\u003cli\u003eHelps avoid false low-pressure warnings and dashboard alerts\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems by maintaining proper tire inflation data\u003c\/li\u003e\n\u003cli\u003ePrevents potential tire damage caused by underinflation or overinflation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation requires removal of the tire from the wheel to access the sensor. The clamp-in mounting method simplifies sensor replacement, and the included hardware and gasket should be used to ensure a proper seal. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure accurate communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso OE Manufactured TPMS sensors are built to meet original equipment standards, ensuring durability and reliable performance. While specific warranty details may vary, Denso parts typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446085386421,"sku":"BBNF-550-3011","price":58.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503011_Fro.jpg?v=1774734211"},{"product_id":"denso-550-3014-tire-pressure-monitoring-system-sensor","title":"Denso 550-3014 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Infiniti Q50 and QX50\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3014 provides accurate, real-time tire pressure data for Infiniti Q50 and QX50 models. Designed to maintain optimal tire performance, this sensor ensures your vehicle’s safety systems receive precise pressure readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for accurate pressure measurement\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-3014 is engineered to match the exact fit and function required by Infiniti Q50 and QX50 vehicles, ensuring compatibility and reliable performance consistent with original components.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3014 TPMS sensor uses an electric power source to provide continuous monitoring of tire pressure. Its direct monitoring system transmits real-time pressure signals, allowing the vehicle’s onboard computer to detect any deviations promptly. The clamp-in mounting method simplifies installation while maintaining a secure fit. Included mounting hardware and gasket ensure a complete replacement kit, reducing the need for additional parts during installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure readings for Infiniti Q50 and QX50\u003c\/li\u003e\n\u003cli\u003ePrevents false TPMS warnings caused by faulty sensors\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems dependent on tire pressure data\u003c\/li\u003e\n\u003cli\u003eHelps improve fuel efficiency by ensuring proper tire inflation\u003c\/li\u003e\n\u003cli\u003eReduces uneven tire wear through consistent pressure monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3014 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method allows for straightforward sensor placement. Ensure the included gasket is properly seated to prevent air leaks. It is recommended to use compatible tire mounting equipment and to verify sensor programming matches the vehicle’s system after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso OE Manufactured TPMS sensors are built to meet original equipment standards, providing reliable performance and durability. This sensor includes all necessary mounting hardware and seals to ensure a proper fit. Warranty coverage details should be confirmed with the parts provider or vehicle manufacturer.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446086205621,"sku":"BBNF-550-3014","price":78.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503014_Fro.jpg?v=1774734212"},{"product_id":"denso-550-3015-tire-pressure-monitoring-system-sensor","title":"Denso 550-3015 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Acura ILX\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3015 provides accurate, real-time tire pressure data for Acura ILX models. Designed to maintain optimal tire performance and safety, this direct TPMS sensor ensures your vehicle’s monitoring system functions correctly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect monitor type for precise pressure readings\u003c\/li\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method with included hardware\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3015 TPMS sensor is engineered specifically for Acura ILX vehicles, providing direct tire pressure monitoring through an electric power source. This sensor transmits real-time pressure signals, allowing the vehicle’s onboard system to alert drivers promptly of any pressure changes. The clamp-in mounting method simplifies installation, and the included mounting hardware and gasket ensure a secure and leak-free fit. As part of Denso's OE Manufactured product line, this sensor meets original equipment specifications, offering reliable performance and compatibility with Acura’s factory systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces faulty or damaged TPMS sensors on Acura ILX\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate or delayed tire pressure warnings\u003c\/li\u003e\n\u003cli\u003ePrevents tire wear caused by improper inflation\u003c\/li\u003e\n\u003cli\u003eMaintains vehicle safety by ensuring proper tire pressure monitoring\u003c\/li\u003e\n\u003cli\u003eSupports compliance with tire pressure monitoring regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3015 TPMS sensor requires removal of the tire from the wheel to access the valve stem. The clamp-in mounting method is straightforward, and the included hardware and gasket should be used to ensure a proper seal and sensor stability. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure accurate communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAs an OE Manufactured product, the Denso 550-3015 TPMS sensor adheres to strict quality standards consistent with original equipment parts. This ensures compatibility and durability for Acura ILX vehicles. Warranty coverage details should be confirmed with the supplier or manufacturer, as they may vary.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446086566069,"sku":"BBNF-550-3015","price":49.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503015_Fro.jpg?v=1774734212"},{"product_id":"denso-550-3018-tire-pressure-monitoring-system-sensor","title":"Denso 550-3018 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Chrysler, Dodge, and Volkswagen Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3018 provides accurate, real-time tire pressure data for select Chrysler, Dodge, and Volkswagen models. Designed to maintain optimal tire safety and performance, this sensor ensures your vehicle’s TPMS system functions correctly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect monitor type for precise pressure readings\u003c\/li\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method with included hardware\u003c\/li\u003e\n\u003cli\u003eGasket or seal included for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-3018 is engineered to match the exact fit and function required by Chrysler, Dodge, and Volkswagen vehicles, ensuring compatibility and reliability consistent with original parts.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3018 TPMS sensor is an electric-powered, direct-type sensor that transmits real-time tire pressure data to the vehicle’s monitoring system. Its clamp-in mounting method simplifies installation while the included mounting hardware and gasket ensure a secure and leak-free fit. This sensor is compatible with various models including Chrysler 300, Dodge Charger, Grand Caravan, Journey, Magnum, and Volkswagen Routan, Sebring, and Town \u0026amp; Country. The sensor’s design supports accurate pressure monitoring, which is critical for vehicle safety and tire longevity.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure monitoring on Chrysler 300 and Dodge Charger\u003c\/li\u003e\n\u003cli\u003eReplaces faulty sensors causing TPMS warning lights on Volkswagen Routan\u003c\/li\u003e\n\u003cli\u003eEnsures real-time pressure data transmission for Dodge Grand Caravan and Journey\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear due to undetected low pressure\u003c\/li\u003e\n\u003cli\u003eMaintains vehicle safety systems reliant on tire pressure data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3018 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method is straightforward, and the included hardware and gasket should be used to ensure a proper seal. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure correct operation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-3018 is built to meet original equipment standards, providing reliable performance and durability. While specific warranty details may vary, Denso parts typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446086664373,"sku":"BBNF-550-3018","price":51.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503018_Fro.jpg?v=1774734212"},{"product_id":"denso-550-3020-tire-pressure-monitoring-system-sensor","title":"Denso 550-3020 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Volvo Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3020 provides accurate, real-time tire pressure data for a range of Volvo models. Designed specifically for vehicles like the Volvo S60, XC90, and V70, this sensor ensures your tire pressure is monitored directly and efficiently.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source for consistent operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for precise pressure readings\u003c\/li\u003e\n\u003cli\u003eReal-time pressure signal transmission capability\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket\/seal for a complete fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor is engineered to match the exact requirements of Volvo vehicles, ensuring compatibility and reliable performance. Using OE Manufactured parts like the 550-3020 helps maintain the integrity of your vehicle’s tire pressure monitoring system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3020 TPMS sensor is an electric-powered device that directly monitors tire pressure and transmits real-time data to your vehicle’s onboard system. Its clamp-in mounting method allows for a secure fit within the tire assembly, and the included mounting hardware and gasket ensure a proper seal to prevent leaks. This sensor is compatible with multiple Volvo models including the C30, C70, S40, S60, S80, V50, V70, XC60, XC70, and XC90, making it a versatile replacement part for maintaining accurate tire pressure monitoring.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure readings on Volvo C30 and XC90 models\u003c\/li\u003e\n\u003cli\u003eResolves TPMS warning light issues caused by faulty sensors\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear due to undetected low pressure\u003c\/li\u003e\n\u003cli\u003eImproves vehicle safety by maintaining proper tire inflation\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with tire pressure monitoring regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3020 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method simplifies sensor placement, and the included hardware and gasket should be used to ensure a secure and leak-free fit. It is recommended to have the sensor programmed or relearned to the vehicle’s system after installation to ensure proper communication and functionality.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-3020 is built to meet original equipment standards, providing reliable performance and durability. While specific warranty details may vary, Denso parts typically come with a limited warranty covering defects in materials and workmanship. Using this sensor helps maintain the safety and efficiency of your Volvo’s tire pressure monitoring system.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446086860981,"sku":"BBNF-550-3020","price":79.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503020_Fro.jpg?v=1774734213"},{"product_id":"denso-550-3021-tire-pressure-monitoring-system-sensor","title":"Denso 550-3021 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable Tire Pressure Monitoring for Volvo Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3021 provides accurate, real-time tire pressure data for select Volvo models. Designed to maintain optimal tire performance, this sensor supports safe driving by delivering direct pressure readings to your vehicle’s monitoring system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectric power source ensures consistent sensor operation\u003c\/li\u003e\n\u003cli\u003eDirect monitor type for precise, real-time pressure signal transmission\u003c\/li\u003e\n\u003cli\u003eClamp-in mounting method for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and gasket for a complete replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing sensors and components that meet original equipment specifications. This ensures compatibility and reliability for vehicles requiring factory-grade parts. The 550-3021 TPMS sensor is engineered to match Volvo’s standards for the S60, S80, V60, V60 Cross Country, XC60, and XC70 models, providing a seamless fit and function.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor 550-3021 operates with an electric power source and features a direct monitoring system that transmits real-time tire pressure signals. The clamp-in mounting method simplifies installation while maintaining sensor stability. Included mounting hardware and gasket ensure a proper seal and secure fit, reducing the risk of air leaks or sensor failure. Compatible with Volvo S60, S80, V60, V60 Cross Country, XC60, and XC70, this sensor supports your vehicle’s tire pressure monitoring system to help maintain safety and efficiency.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors on Volvo S60, S80, V60, V60 Cross Country, XC60, and XC70\u003c\/li\u003e\n\u003cli\u003eRestores accurate tire pressure readings to prevent uneven tire wear\u003c\/li\u003e\n\u003cli\u003eHelps avoid false low tire pressure warnings\u003c\/li\u003e\n\u003cli\u003eSupports maintaining proper tire inflation for fuel efficiency\u003c\/li\u003e\n\u003cli\u003ePrevents potential tire damage caused by undetected pressure loss\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3021 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method allows for straightforward sensor placement. Ensure the included gasket is properly seated to prevent air leaks. Use the provided mounting hardware to secure the sensor firmly. After installation, reset the vehicle’s TPMS system according to Volvo’s service procedures to ensure accurate sensor communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-3021 is built to meet original equipment standards, ensuring reliable performance and durability. This sensor includes all necessary mounting components for a complete replacement. While specific warranty details may vary, Denso products typically come with manufacturer-backed coverage to protect against defects in materials and workmanship.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446086992053,"sku":"BBNF-550-3021","price":76.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503021_Fro.jpg?v=1774734213"},{"product_id":"denso-550-3022-tire-pressure-monitoring-system-sensor","title":"Denso 550-3022 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Jaguar and Land Rover Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3022 provides accurate, real-time tire pressure monitoring for select Jaguar and Land Rover models. Designed to maintain optimal tire performance, this sensor ensures safety and efficiency by delivering direct pressure readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct pressure measurement\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission: Yes, for immediate alerts\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp in for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes Mounting Hardware and Gasket\/Seal for complete setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on producing original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-3022 is engineered to match the performance and reliability standards expected by Jaguar and Land Rover, ensuring seamless integration and dependable function within the vehicle’s tire pressure monitoring system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Denso 550-3022 TPMS sensor is an electric-powered, direct monitoring device that transmits real-time tire pressure data to the vehicle’s onboard system. Its clamp-in mounting method provides a secure fit, reducing the risk of sensor displacement or damage. Included mounting hardware and gasket or seal simplify installation and help maintain an airtight seal, critical for accurate pressure readings. This sensor is compatible with Jaguar models such as XJ and XJR, and Land Rover models including LR2, LR4, Range Rover, Range Rover Evoque, and Range Rover Sport.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure monitoring for Jaguar and Land Rover vehicles\u003c\/li\u003e\n\u003cli\u003ePrevents false low tire pressure warnings caused by faulty sensors\u003c\/li\u003e\n\u003cli\u003eHelps avoid uneven tire wear and potential tire damage\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems dependent on correct tire pressure data\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with tire pressure monitoring regulations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Denso 550-3022 TPMS sensor requires removal of the tire from the wheel. The clamp-in mounting method necessitates careful placement to avoid sensor damage. Use the included mounting hardware and gasket or seal to ensure a proper fit and airtight seal. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure accurate communication.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAs part of the Denso OE Manufactured product line, this TPMS sensor meets stringent quality standards aligned with original equipment specifications. The sensor is designed for durability and reliable performance in Jaguar and Land Rover vehicles. Warranty coverage details should be confirmed with the point of purchase or manufacturer documentation.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446087254197,"sku":"BBNF-550-3022","price":68.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503022_Fro.jpg?v=1774734213"},{"product_id":"denso-550-3023-tire-pressure-monitoring-system-sensor","title":"Denso 550-3023 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Jaguar and Land Rover Vehicles\u003c\/h2\u003e\u003cp\u003eThe Denso OE Manufactured Tire Pressure Monitoring System (TPMS) Sensor 550-3023 provides accurate, real-time tire pressure data for select Jaguar and Land Rover models. Designed to maintain optimal tire performance, this sensor supports vehicle safety and efficiency through direct pressure monitoring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower Source: Electric for consistent operation\u003c\/li\u003e\n\u003cli\u003eMonitor Type: Direct measurement of tire pressure\u003c\/li\u003e\n\u003cli\u003eReal-Time Pressure Signal Transmission: Yes, ensures immediate updates\u003c\/li\u003e\n\u003cli\u003eMounting Method: Clamp in for secure installation\u003c\/li\u003e\n\u003cli\u003eIncludes Mounting Hardware and Gasket\/Seal for complete setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Denso OE Manufactured Product Line\u003c\/h2\u003e\u003cp\u003eThe OE Manufactured line by Denso focuses on delivering original equipment quality parts that meet or exceed factory specifications. This TPMS sensor 550-3023 is engineered to match the performance and durability standards required by Jaguar and Land Rover vehicles, ensuring compatibility and reliable function within the vehicle’s tire pressure monitoring system.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Denso TPMS sensor 550-3023 is an electric-powered, direct-type sensor designed to clamp securely inside the tire assembly. It transmits real-time pressure signals to the vehicle’s monitoring system, allowing drivers of Jaguar models such as the F-Pace, F-Type, XE, XF, XJ, and XJR, as well as Land Rover models including Discovery Sport, LR4, Range Rover, Range Rover Evoque, and Range Rover Sport, to maintain proper tire inflation. The included mounting hardware and gasket ensure a proper seal and installation, reducing the risk of air leaks and sensor failure.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaintains accurate tire pressure readings for improved safety\u003c\/li\u003e\n\u003cli\u003ePrevents warning light malfunctions related to faulty sensors\u003c\/li\u003e\n\u003cli\u003eSupports fuel efficiency by ensuring correct tire inflation\u003c\/li\u003e\n\u003cli\u003eHelps avoid uneven tire wear caused by underinflation\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or non-functioning TPMS sensors on compatible Jaguar and Land Rover models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation requires clamping the sensor securely inside the tire rim using the included hardware and gasket. It is recommended to have the sensor installed by a professional technician to ensure proper calibration and avoid damage. After installation, the TPMS system should be reset or relearned according to the vehicle manufacturer’s procedures to ensure accurate pressure monitoring.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDenso’s OE Manufactured TPMS sensor 550-3023 is built to meet original equipment standards for durability and performance. While specific warranty details may vary, Denso parts typically come with a limited warranty covering defects in materials and workmanship. Refer to the vehicle or part documentation for exact warranty terms.\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":43446087418037,"sku":"BBNF-550-3023","price":70.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/NP_5503023_Fro.jpg?v=1774734214"},{"product_id":"genuine-0009057200-tire-pressure-monitoring-system-sensor","title":"Genuine 0009057200 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Select Mercedes-Benz Models\u003c\/h2\u003e\u003cp\u003eThe Genuine Tire Pressure Monitoring System (TPMS) Sensor, part number 0009057200, is designed specifically for a range of Mercedes-Benz vehicles. This sensor helps maintain accurate tire pressure readings, ensuring safety and optimal vehicle performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with multiple Mercedes-Benz models including C63 AMG, E350, GL450, and ML350\u003c\/li\u003e\n\u003cli\u003eGenuine OEM part ensuring precise fit and function\u003c\/li\u003e\n\u003cli\u003eMonitors tire pressure to alert drivers of underinflated tires\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003ePart number 0009057200 for easy identification and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Genuine TPMS sensor is engineered to meet the specifications of various Mercedes-Benz models such as the C250, CLS550, GLK350, and R350. The sensor accurately detects tire pressure changes and transmits data to the vehicle’s onboard computer system. Using part number 0009057200 guarantees compatibility and reliable operation across the listed fitments, including AMG and non-AMG variants.\u003c\/p\u003e\u003ch2\u003ePurpose and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDetects low tire pressure to prevent unsafe driving conditions\u003c\/li\u003e\n\u003cli\u003eHelps maintain fuel efficiency by ensuring proper tire inflation\u003c\/li\u003e\n\u003cli\u003ePrevents premature tire wear caused by incorrect pressure\u003c\/li\u003e\n\u003cli\u003eAlerts drivers to potential tire leaks or damage\u003c\/li\u003e\n\u003cli\u003eSupports compliance with vehicle safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Genuine TPMS sensor requires removal of the tire from the wheel. It is recommended to have the sensor installed by a professional technician to ensure proper calibration and avoid damage. After installation, the sensor must be programmed or relearned to the vehicle’s system using appropriate diagnostic tools compatible with Mercedes-Benz models.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eAs a Genuine OEM part, this TPMS sensor meets Mercedes-Benz quality standards for durability and performance. While specific warranty details may vary, Genuine parts typically come with manufacturer-backed coverage to protect against defects in materials and workmanship. Using part number 0009057200 ensures you receive a sensor built to original equipment specifications.\u003c\/p\u003e","brand":"Genuine","offers":[{"title":"Default Title","offer_id":43887686385845,"sku":"DFPH-0009057200","price":132.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/GU_0009057200_Top_434e8ab5-ca11-4a95-a589-7a2a85bb4ded.jpg?v=1775003168"},{"product_id":"huf-rde001v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE001V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Select European Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE001V21: 433MHz OE TPMS Replacement Sensor is designed to provide accurate tire pressure monitoring for a range of premium European cars. This metal sensor operates at 433MHz, ensuring compatibility with original equipment systems on models from Audi, BMW, Mercedes-Benz, Porsche, and more.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE replacement sensor with 433MHz frequency\u003c\/li\u003e\n\u003cli\u003eDurable metal construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple makes including Audi, BMW, Mercedes-Benz, Porsche, and Volkswagen\u003c\/li\u003e\n\u003cli\u003ePart number RDE001V21 for precise fitment\u003c\/li\u003e\n\u003cli\u003eSupports various models such as BMW 320i, Audi A6 Quattro, Porsche Boxster, and Ferrari 599 GTB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE001V21: 433MHz OE TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThis sensor is part of Huf's RDE001V21: 433MHz OE TPMS Replacement Sensor line, which focuses on delivering direct OE replacements that maintain factory specifications. The 433MHz frequency matches the original tire pressure monitoring systems used by many European manufacturers, ensuring seamless integration and reliable data transmission.\u003c\/p\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe RDE001V21 sensor features a robust metal body designed to withstand harsh road conditions and temperature variations. Operating at 433MHz, it is engineered to communicate effectively with the vehicle’s onboard TPMS system. This sensor is compatible with a wide range of vehicles including Audi models like the A6 and A8 Quattro, BMW 3 Series variants such as the 320i and 328i, Mercedes-Benz S500, Porsche Boxster, and select Ferrari and Maserati models. Using the correct part number RDE001V21 ensures proper fitment and functionality.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the TPMS Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncorrect or no tire pressure readings on the dashboard\u003c\/li\u003e\n\u003cli\u003eTPMS warning light activation due to sensor failure\u003c\/li\u003e\n\u003cli\u003eLoss of sensor signal caused by damaged or worn sensors\u003c\/li\u003e\n\u003cli\u003eInaccurate tire pressure data affecting vehicle safety and fuel efficiency\u003c\/li\u003e\n\u003cli\u003eReplacement of faulty sensors after tire service or sensor battery depletion\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the sensor is programmed or relearned according to the vehicle manufacturer’s procedure\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damaging the metal sensor during installation\u003c\/li\u003e\n\u003cli\u003eVerify sensor frequency compatibility (433MHz) with the vehicle’s TPMS system\u003c\/li\u003e\n\u003cli\u003eCheck tire pressure readings after installation to confirm correct operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE001V21 sensor to meet OE standards for durability and performance. The metal construction provides resistance to corrosion and mechanical stress. While specific warranty details may vary, Huf products typically come with a limited warranty covering defects in materials and workmanship to ensure reliability in service.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944094630069,"sku":"FNMR-RDE001V21","price":89.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE001V21_Fro.jpg?v=1775005279"},{"product_id":"huf-rde004v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE004V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Audi, BMW, Mercedes-Benz, and More\u003c\/h2\u003e\u003cp\u003eThe Huf RDE004V21: 315MHz OE TPMS Replacement Sensor is designed to maintain accurate tire pressure monitoring across a range of premium vehicles. Engineered with durable metal construction and operating at 315MHz, this sensor ensures consistent performance and compatibility with select Audi, BMW, Ferrari, Maybach, Mercedes-Benz, and Porsche models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE replacement sensor operating at 315MHz frequency\u003c\/li\u003e\n\u003cli\u003eDurable metal material for long-lasting reliability\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple luxury vehicle makes and models\u003c\/li\u003e\n\u003cli\u003ePart number RDE004V21 for precise identification\u003c\/li\u003e\n\u003cli\u003eSupports accurate tire pressure monitoring system functionality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE004V21: 315MHz OE TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE004V21: 315MHz OE TPMS Replacement Sensor line by Huf focuses on providing original equipment quality sensors that operate at the 315MHz frequency standard. This product line is tailored to meet the specific requirements of various European and luxury vehicles, ensuring seamless integration with factory tire pressure monitoring systems. The metal construction enhances sensor durability, making it suitable for demanding driving conditions.\u003c\/p\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis TPMS sensor is crafted from metal, offering robust durability and resistance to environmental factors. Operating at 315MHz, it matches the frequency used by many OE tire pressure monitoring systems. The RDE004V21 sensor is compatible with a wide range of vehicles, including Audi models like A6, A8, and Allroad Quattro; BMW models such as 320i, 328i, 330i, M3, and 740i; Mercedes-Benz models including CL55 AMG, E350, and SL600; as well as Ferrari 575 M Maranello, Maybach, and Porsche 911, Boxster, and Cayman. This ensures that the sensor integrates smoothly with the vehicle’s existing TPMS infrastructure.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors\u003c\/li\u003e\n\u003cli\u003eRestores accurate tire pressure readings to prevent uneven tire wear\u003c\/li\u003e\n\u003cli\u003eEliminates false low tire pressure warnings on compatible Audi, BMW, and Mercedes-Benz vehicles\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems by maintaining proper tire pressure monitoring\u003c\/li\u003e\n\u003cli\u003eHelps maintain fuel efficiency by ensuring correct tire inflation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the sensor is programmed or relearned according to the vehicle manufacturer’s procedures\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damage to the sensor during installation\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with the vehicle’s TPMS system before installation\u003c\/li\u003e\n\u003cli\u003eCheck tire pressure readings after installation to confirm proper sensor function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE004V21 sensor to meet OE standards, ensuring reliable performance and durability. The metal construction provides enhanced resistance to wear and environmental exposure. While specific warranty details may vary, Huf products typically come with manufacturer-backed quality assurance to support long-term use in premium vehicles.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944095842485,"sku":"FNMR-RDE004V21","price":67.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE004V21_Fro.jpg?v=1775005279"},{"product_id":"huf-rde005v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE005V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for BMW, Ferrari, Land Rover, Porsche, Volkswagen\u003c\/h2\u003e\u003cp\u003eThe Huf RDE005V21: 433MHz OE TPMS Replacement Sensor is designed to provide accurate tire pressure monitoring for select luxury and performance vehicles. Engineered with durable metal construction and operating at 433MHz, this sensor ensures consistent communication with your vehicle’s onboard system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE replacement sensor with 433MHz frequency\u003c\/li\u003e\n\u003cli\u003eDurable metal material for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eCompatible with BMW X5, Ferrari Enzo, Land Rover LR3 and Range Rover, Porsche Cayenne, Volkswagen Touareg\u003c\/li\u003e\n\u003cli\u003ePart number RDE005V21 for precise fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain factory tire pressure monitoring system functionality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE005V21: 433MHz OE TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThis product is part of Huf’s RDE005V21: 433MHz OE TPMS Replacement Sensor line, which focuses on providing direct OE replacements for tire pressure monitoring systems operating at 433MHz. These sensors are engineered to meet original equipment specifications, ensuring compatibility and reliable performance across multiple vehicle makes and models.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Huf RDE005V21 sensor operates at a frequency of 433MHz, matching the original equipment requirements for several European and luxury vehicles. Constructed from metal, this sensor offers enhanced durability and resistance to environmental factors such as heat and corrosion. The sensor is designed to integrate seamlessly with the vehicle’s existing TPMS system, providing accurate tire pressure data to the dashboard display.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors in BMW X5 and Porsche Cayenne\u003c\/li\u003e\n\u003cli\u003eRestores accurate tire pressure readings in Land Rover LR3 and Range Rover models\u003c\/li\u003e\n\u003cli\u003eResolves intermittent or lost TPMS signals in Volkswagen Touareg vehicles\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with safety standards by maintaining proper tire pressure monitoring\u003c\/li\u003e\n\u003cli\u003ePrevents dashboard warning lights caused by sensor failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Huf RDE005V21 sensor requires proper programming to the vehicle’s TPMS system. It is recommended to use a compatible TPMS tool to activate and relearn the sensor after installation. Ensure the sensor is securely mounted to the wheel valve stem and verify the sensor frequency matches the vehicle’s system requirements. Professional installation is advised for accurate calibration and system integration.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE005V21 sensor to meet OE standards, ensuring reliable performance and durability. The metal construction supports long-term use under typical driving conditions. Warranty coverage details should be confirmed at the point of purchase, as they may vary by distributor or region.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944096399541,"sku":"FNMR-RDE005V21","price":86.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE005V21_Fro.jpg?v=1775005279"},{"product_id":"huf-rde012v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE012V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for BMW, Mini, and Rolls-Royce Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE012V21: 433MHz OE TPMS Replacement Sensor is designed to maintain accurate tire pressure monitoring for select BMW, Mini, and Rolls-Royce models. This metal sensor operates at 433MHz frequency, ensuring compatibility with original equipment systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE replacement sensor with 433MHz frequency\u003c\/li\u003e\n\u003cli\u003eDurable metal construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of BMW, Mini, and Rolls-Royce models\u003c\/li\u003e\n\u003cli\u003ePart number RDE012V21 for precise fitment\u003c\/li\u003e\n\u003cli\u003eMaintains factory tire pressure monitoring system functionality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE012V21: 433MHz OE TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE012V21: 433MHz OE TPMS Replacement Sensor is part of Huf's specialized line of tire pressure monitoring system sensors designed to meet original equipment specifications. This product line focuses on delivering sensors that operate at the correct 433MHz frequency and feature robust metal construction, ensuring reliable communication with vehicle systems and durability under typical driving conditions.\u003c\/p\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis TPMS sensor is engineered for use with various BMW models including the 1 Series M, 118i, 120i, 125i, 128i, 130i, 135i, 135is, 320i, 325i, 328i, 328i xDrive, 335d, 335i, 335is, 335i xDrive, 525i, 528i, 528i xDrive, 530i, 535d, 535d xDrive, 535i, 535i GT, 535i GT xDrive, 535i xDrive, 550i, 550i GT, 550i GT xDrive, 550i xDrive, 640i, 640i Gran Coupe, 640i xDrive, 640i xDrive Gran Coupe, 650Ci, 650i, 650i Gran Coupe, 650i xDrive, 650i xDrive Gran Coupe, 740i, 740Li, 740Li xDrive, 750i, 750i xDrive, 750Li, 750Li xDrive, 760Li, ActiveHybrid 5, ActiveHybrid 7, M3, M5, M6, and Z4. It also fits Mini models such as Cooper, Cooper Countryman, and Cooper Paceman, as well as Rolls-Royce Ghost, Phantom, and Wraith. The sensor ensures proper tire pressure data transmission to the vehicle’s onboard system, supporting safety and performance.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This TPMS Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncorrect or missing tire pressure readings on the dashboard\u003c\/li\u003e\n\u003cli\u003eTPMS warning light activation due to sensor failure\u003c\/li\u003e\n\u003cli\u003eLoss of communication between tire sensor and vehicle system\u003c\/li\u003e\n\u003cli\u003eSensor damage from road debris or corrosion\u003c\/li\u003e\n\u003cli\u003eReplacement of faulty or expired original sensors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Huf RDE012V21 sensor requires proper programming to the vehicle’s TPMS system. It is recommended to use a compatible TPMS tool to activate and register the sensor after installation. Ensure the sensor is securely mounted on the wheel rim and that the valve stem is properly tightened to prevent air leaks. Professional installation is advised for accurate calibration and system integration.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eManufactured with metal components and designed to meet OE specifications, the Huf RDE012V21 sensor offers reliable performance and durability. While specific warranty details are not provided here, Huf products typically come with manufacturer-backed quality assurance. Verify warranty terms with the supplier or manufacturer upon purchase.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944096563381,"sku":"FNMR-RDE012V21","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE012V21_Fro.jpg?v=1775005280"},{"product_id":"huf-rde013v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE013V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Volkswagen CC and Passat Models\u003c\/h2\u003e\u003cp\u003eThe Huf RDE013V21 TPMS sensor is designed to provide accurate tire pressure monitoring for Volkswagen vehicles, including the CC, Passat, and Passat CC. This metal sensor operates at 433MHz, ensuring compatibility with original equipment systems for precise and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE replacement sensor for Volkswagen CC, Passat, and Passat CC\u003c\/li\u003e\n\u003cli\u003eOperates at 433MHz frequency for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eDurable metal construction for long-lasting use\u003c\/li\u003e\n\u003cli\u003ePart number RDE013V21 for exact fitment and compatibility\u003c\/li\u003e\n\u003cli\u003eDesigned to meet original equipment specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE013V21 433MHz OE TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE013V21: 433MHz OE TPMS Replacement Sensor is part of Huf's specialized product line focused on providing direct OE replacements for tire pressure monitoring systems. This line emphasizes precise frequency matching and durable materials to ensure seamless integration with vehicle systems, maintaining factory-level safety and performance standards.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis TPMS sensor features a metal body designed to withstand the harsh conditions inside a tire assembly. Operating at 433MHz, it matches the frequency used by Volkswagen's original tire pressure monitoring systems, ensuring accurate data transmission to the vehicle's onboard computer. The sensor is engineered specifically for Volkswagen CC, Passat, and Passat CC models, making it a reliable choice for maintaining proper tire pressure monitoring functionality.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This TPMS Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncorrect or no tire pressure readings on Volkswagen CC and Passat models\u003c\/li\u003e\n\u003cli\u003eTPMS warning light illuminated due to sensor failure\u003c\/li\u003e\n\u003cli\u003eSensor battery depletion or malfunction\u003c\/li\u003e\n\u003cli\u003eReplacement after tire or sensor damage\u003c\/li\u003e\n\u003cli\u003eMaintaining compliance with vehicle safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the sensor is programmed or relearned according to Volkswagen procedures\u003c\/li\u003e\n\u003cli\u003eHandle the metal sensor carefully to avoid damage during installation\u003c\/li\u003e\n\u003cli\u003eVerify the sensor frequency matches the vehicle’s TPMS system (433MHz)\u003c\/li\u003e\n\u003cli\u003eUse proper tools to remove and install the sensor to prevent valve stem damage\u003c\/li\u003e\n\u003cli\u003eCheck tire pressure after installation to confirm sensor functionality\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE013V21 sensor to meet original equipment standards, ensuring reliable performance and durability. This sensor undergoes rigorous quality control to maintain accuracy and longevity. Warranty details should be confirmed with the supplier or manufacturer, as coverage may vary.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944097054901,"sku":"FNMR-RDE013V21","price":101.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE013V21_Fro.jpg?v=1775005280"},{"product_id":"huf-rde019v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE019V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor Replacement for Hyundai and Kia Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE019V21: 315MHz OE Quality TPMS Replacement Sensor is designed to maintain accurate tire pressure monitoring for select Hyundai and Kia models. This metal sensor operates at 315MHz, ensuring compatibility and reliable communication with your vehicle’s onboard system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE quality replacement sensor with metal construction for durability\u003c\/li\u003e\n\u003cli\u003eOperates at 315MHz frequency for precise tire pressure data transmission\u003c\/li\u003e\n\u003cli\u003eCompatible with Hyundai Azera, Elantra, Magentis, Optima, Rondo, Santa Fe, Sedona, and Veracruz models\u003c\/li\u003e\n\u003cli\u003ePart number RDE019V21 for easy identification and fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to meet original equipment specifications for seamless integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE019V21: 315MHz OE Quality TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThis product is part of Huf’s RDE019V21: 315MHz OE Quality TPMS Replacement Sensor line, which focuses on providing direct-fit tire pressure monitoring system sensors that match original equipment standards. The 315MHz frequency ensures compatibility with specific Hyundai and Kia vehicles, delivering accurate and timely tire pressure readings to the vehicle’s monitoring system.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Huf RDE019V21 sensor features a robust metal construction designed to withstand the harsh conditions inside the tire assembly. Operating at 315MHz, it communicates effectively with the vehicle’s TPMS receiver to alert drivers of any pressure deviations. This sensor is engineered to replace factory-installed units on various Hyundai and Kia models, including the Azera, Elantra, Magentis, Optima, Rondo, Santa Fe, Sedona, and Veracruz, ensuring proper fit and function.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors in Hyundai and Kia vehicles\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate or intermittent tire pressure readings\u003c\/li\u003e\n\u003cli\u003eRestores proper tire pressure monitoring system alerts\u003c\/li\u003e\n\u003cli\u003ePrevents potential tire damage due to underinflation or overinflation\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle safety standards related to tire pressure monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the sensor is programmed or relearned according to the vehicle manufacturer’s procedures\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damage to the sensor during installation\u003c\/li\u003e\n\u003cli\u003eVerify the sensor frequency (315MHz) matches the vehicle’s TPMS system requirements\u003c\/li\u003e\n\u003cli\u003eCheck tire pressure and sensor functionality after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE019V21 sensor to meet original equipment quality standards, providing reliable performance and durability. While specific warranty details are not provided here, Huf products typically come with manufacturer-backed quality assurance to support long-term use in Hyundai and Kia vehicles.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944097710261,"sku":"FNMR-RDE019V21","price":28.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE019V21_Fro.jpg?v=1775005281"},{"product_id":"huf-rde020v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE020V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Hyundai and Kia Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE020V21: 315MHz OE Quality TPMS Replacement Sensor is designed to maintain accurate tire pressure monitoring for select Hyundai and Kia models. This metal sensor operates at 315MHz, ensuring compatibility and reliable communication with your vehicle's TPMS system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE quality replacement sensor with metal construction\u003c\/li\u003e\n\u003cli\u003eOperates at 315MHz frequency for precise signal transmission\u003c\/li\u003e\n\u003cli\u003eCompatible with Hyundai Entourage, Santa Fe, Veracruz and Kia Sedona models\u003c\/li\u003e\n\u003cli\u003ePart number RDE020V21 for easy identification and ordering\u003c\/li\u003e\n\u003cli\u003eDesigned to meet original equipment specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE020V21: 315MHz OE Quality TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE020V21: 315MHz OE Quality TPMS Replacement Sensor line from Huf focuses on providing direct-fit tire pressure monitoring system sensors that match original equipment standards. This product line emphasizes frequency accuracy and durable metal materials to ensure long-term performance and reliable tire pressure data transmission for compatible vehicles.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis TPMS sensor features a robust metal construction that withstands the harsh conditions inside the tire assembly. Operating at 315MHz, it communicates effectively with the vehicle’s onboard monitoring system to alert drivers of tire pressure changes. The sensor is specifically designed for use with Hyundai Entourage, Santa Fe, Veracruz, and Kia Sedona models, ensuring proper fitment and functionality. Using part number RDE020V21 guarantees you receive the correct sensor tailored for these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors in Hyundai and Kia vehicles\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate or intermittent tire pressure readings\u003c\/li\u003e\n\u003cli\u003eRestores proper tire pressure monitoring system alerts\u003c\/li\u003e\n\u003cli\u003ePrevents TPMS warning lights caused by sensor failure\u003c\/li\u003e\n\u003cli\u003eMaintains vehicle safety and tire performance through accurate monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Huf RDE020V21 sensor should be performed by a qualified technician familiar with TPMS systems. Ensure the sensor is programmed or relearned to the vehicle’s TPMS control module after installation. Proper torque and handling are important to avoid sensor damage. Verify compatibility with Hyundai Entourage, Santa Fe, Veracruz, and Kia Sedona models before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE020V21 sensor to meet original equipment standards, providing reliable performance and durability. The metal construction enhances sensor longevity under typical driving conditions. Warranty coverage details should be confirmed with the supplier or manufacturer to ensure protection against defects.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944098234549,"sku":"FNMR-RDE020V21","price":28.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE020V21_Fro.jpg?v=1775005281"},{"product_id":"huf-rde027v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE027V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for BMW and Mini Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE027V21 TPMS sensor offers precise tire pressure monitoring for select BMW and Mini models. Designed with durable metal construction and operating at 433MHz, this sensor ensures accurate and consistent performance to maintain vehicle safety and efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE quality replacement sensor with metal material for durability\u003c\/li\u003e\n\u003cli\u003eOperates at 433MHz frequency for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of BMW and Mini models including 3 Series, 4 Series, X Series, and Cooper variants\u003c\/li\u003e\n\u003cli\u003ePart number RDE027V21 for easy identification and fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to meet original equipment specifications for seamless integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE027V21: 433MHz OE Quality TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE027V21: 433MHz OE Quality TPMS Replacement Sensor line by Huf is engineered to provide direct replacement sensors that match original equipment standards. This product line focuses on delivering sensors that operate at 433MHz, a common frequency for European vehicles, ensuring compatibility and reliable communication with the vehicle’s tire pressure monitoring system. The metal construction enhances sensor longevity and resistance to environmental factors.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Huf TPMS sensor, part number RDE027V21, is crafted from metal to withstand the rigors of tire and wheel environments. Operating at 433MHz, it is specifically designed for use in BMW and Mini vehicles such as the 218i Gran Coupe, 330i xDrive, M3, X5, and Cooper Countryman among others. The sensor accurately monitors tire pressure and transmits data to the vehicle’s onboard system, helping maintain optimal tire performance and safety. Its OE quality ensures it meets the stringent requirements set by vehicle manufacturers.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors in BMW and Mini vehicles\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate or intermittent tire pressure readings\u003c\/li\u003e\n\u003cli\u003ePrevents TPMS warning light activation due to sensor failure\u003c\/li\u003e\n\u003cli\u003eMaintains proper tire pressure monitoring for improved fuel efficiency and tire life\u003c\/li\u003e\n\u003cli\u003eSupports compliance with safety regulations requiring functional TPMS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific BMW or Mini model before installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to remove and install the sensor without damaging the valve stem\u003c\/li\u003e\n\u003cli\u003eAfter installation, perform a TPMS system reset or relearn procedure as per vehicle manufacturer instructions\u003c\/li\u003e\n\u003cli\u003eCheck sensor frequency (433MHz) matches vehicle requirements to avoid communication issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Huf RDE027V21 TPMS sensor is manufactured to meet original equipment standards, providing reliable performance and durability. While specific warranty details are not provided here, Huf products typically come with manufacturer-backed quality assurance. It is recommended to verify warranty terms with the supplier or manufacturer at the time of purchase.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944098431157,"sku":"FNMR-RDE027V21","price":28.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE027V21_Fro.jpg?v=1775005282"},{"product_id":"huf-rde033v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE033V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Chevrolet Corvette\u003c\/h2\u003e\u003cp\u003eThe Huf RDE033V21 TPMS sensor is designed to provide accurate tire pressure monitoring for Chevrolet Corvette vehicles. Operating at 433MHz, this metal sensor ensures consistent performance and durability for your tire pressure monitoring system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE quality replacement sensor for Chevrolet Corvette\u003c\/li\u003e\n\u003cli\u003eOperates at 433MHz frequency for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eDurable metal construction for long-lasting use\u003c\/li\u003e\n\u003cli\u003ePart number RDE033V21 for precise fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with tire pressure monitoring systems requiring 433MHz sensors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE033V21: 433MHz OE Quality TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE033V21: 433MHz OE Quality TPMS Replacement Sensor line by Huf focuses on providing original equipment quality sensors that match factory specifications. This product line is engineered to deliver accurate tire pressure data and maintain vehicle safety systems without compromise. The 433MHz frequency is standard for many European and select American vehicles, including the Chevrolet Corvette, ensuring seamless integration and reliable communication with the vehicle’s onboard systems.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis TPMS sensor features a robust metal construction designed to withstand the harsh conditions inside a tire assembly. The 433MHz operating frequency aligns with the OE requirements for the Chevrolet Corvette, ensuring compatibility and proper function. The sensor transmits real-time tire pressure data to the vehicle’s monitoring system, helping maintain optimal tire performance and safety.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors on Chevrolet Corvette models\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate or intermittent tire pressure readings\u003c\/li\u003e\n\u003cli\u003eEliminates TPMS warning lights caused by sensor failure\u003c\/li\u003e\n\u003cli\u003eRestores proper communication between tire sensors and vehicle system\u003c\/li\u003e\n\u003cli\u003eSupports maintaining tire pressure for improved safety and tire longevity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Huf RDE033V21 sensor requires proper programming or relearning to the vehicle’s TPMS system. It is recommended to use a compatible TPMS tool to activate and sync the sensor after installation. Ensure the sensor is securely mounted and the valve stem is properly tightened to prevent air leaks. Professional installation is advised for accurate sensor calibration and system reset.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE033V21 sensor to meet OE quality standards, ensuring reliable performance and durability. While specific warranty details are not provided here, Huf products typically come with manufacturer-backed warranties covering defects in materials and workmanship. Verify warranty terms with the supplier or manufacturer upon purchase.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944099283125,"sku":"FNMR-RDE033V21","price":28.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE033V21_Fro.jpg?v=1775005282"},{"product_id":"huf-rde036v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE036V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor Replacement for Select Vehicle Models\u003c\/h2\u003e\u003cp\u003eThe Huf RDE036V21: 433MHz OE Quality TPMS Replacement Sensor offers a precise and durable solution for maintaining accurate tire pressure monitoring. Designed to meet original equipment standards, this metal sensor operates at 433MHz frequency, ensuring compatibility with a wide range of Chrysler, Dodge, Mercedes-Benz, Jeep, and other vehicle models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE quality tire pressure monitoring system (TPMS) sensor\u003c\/li\u003e\n\u003cli\u003eOperates at 433MHz frequency for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eConstructed with durable metal material for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple makes including Chrysler, Dodge, Mercedes-Benz, Jeep, Ram, and more\u003c\/li\u003e\n\u003cli\u003ePart number RDE036V21 ensures exact fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE036V21: 433MHz OE Quality TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE036V21: 433MHz OE Quality TPMS Replacement Sensor is part of Huf's dedicated product line focused on delivering original equipment quality sensors. This line emphasizes precise frequency matching and robust metal construction to provide reliable tire pressure data essential for vehicle safety systems. The sensors are engineered to meet strict OE specifications, making them suitable replacements for a variety of passenger cars, SUVs, and trucks.\u003c\/p\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis TPMS sensor is designed to operate at 433MHz, a common frequency used in many European and American vehicles. Its metal construction enhances durability against harsh road conditions and temperature variations. The sensor is compatible with numerous models such as the Chrysler 300, Dodge Charger, Jeep Wrangler, Mercedes-Benz AMG GT series, Ram 1500, and Fiat 500L, among others. Using part number RDE036V21 ensures proper fitment and communication with the vehicle’s onboard monitoring system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or non-responsive TPMS sensors\u003c\/li\u003e\n\u003cli\u003eRestores accurate tire pressure readings to prevent uneven tire wear\u003c\/li\u003e\n\u003cli\u003eEliminates false low tire pressure warnings on compatible Chrysler, Dodge, and Mercedes-Benz vehicles\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety systems by maintaining proper tire pressure monitoring\u003c\/li\u003e\n\u003cli\u003ePrevents potential fuel efficiency loss due to incorrect tire pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the vehicle’s TPMS system is compatible with 433MHz sensors before installation\u003c\/li\u003e\n\u003cli\u003eUse proper tools to remove and install the sensor to avoid damage\u003c\/li\u003e\n\u003cli\u003eAfter installation, reprogram or relearn the sensor according to the vehicle manufacturer’s instructions\u003c\/li\u003e\n\u003cli\u003eCheck sensor battery status if issues persist after replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf’s RDE036V21 TPMS sensor is manufactured to meet original equipment standards, providing reliable performance and durability. The metal construction supports long-term use under various driving conditions. Warranty coverage details should be confirmed with the distributor or vehicle manufacturer, as they may vary by region and application.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944100069557,"sku":"FNMR-RDE036V21","price":26.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE036V21_Fro_f9052a3b-c422-4a76-9a02-050bc1231364.jpg?v=1775005282"},{"product_id":"huf-rde043v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE043V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Hyundai, Kia, and Genesis Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE043V21: 433MHz OE Quality TPMS Replacement Sensor offers precise tire pressure monitoring for select Hyundai, Kia, and Genesis models. Designed with durable metal construction and operating at 433MHz, this sensor ensures accurate and consistent performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE quality replacement sensor with metal housing for durability\u003c\/li\u003e\n\u003cli\u003eOperates at 433MHz frequency for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eCompatible with Hyundai Accent, Cadenza, Sorento, Kia Sorento, Genesis G80, and Genesis models\u003c\/li\u003e\n\u003cli\u003ePart number RDE043V21 for exact fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to meet original equipment specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE043V21: 433MHz OE Quality TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThis product is part of the Huf RDE043V21: 433MHz OE Quality TPMS Replacement Sensor line, which focuses on providing direct-fit tire pressure monitoring system sensors that match original equipment standards. The 433MHz frequency is commonly used in many Hyundai, Kia, and Genesis vehicles, ensuring compatibility and reliable communication with the vehicle’s onboard TPMS system.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Huf RDE043V21 TPMS sensor features a robust metal construction designed to withstand the harsh conditions inside a tire assembly. Operating at 433MHz, it provides consistent and accurate tire pressure data to the vehicle’s monitoring system. This sensor is engineered to replace factory-installed units on compatible models, maintaining the integrity of the vehicle’s safety and performance systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors in Hyundai Accent and Cadenza\u003c\/li\u003e\n\u003cli\u003eRestores proper tire pressure monitoring on Kia Sorento models\u003c\/li\u003e\n\u003cli\u003eResolves intermittent or no signal issues in Genesis G80 and Genesis vehicles\u003c\/li\u003e\n\u003cli\u003ePrevents inaccurate tire pressure warnings and dashboard alerts\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with safety regulations requiring functional TPMS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Huf RDE043V21 sensor requires proper tire removal and mounting procedures. It is recommended to have the sensor programmed or relearned to the vehicle’s TPMS system after installation to ensure accurate communication. Use appropriate tools to avoid damage to the sensor or valve stem during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures this TPMS sensor to meet original equipment standards, ensuring reliable performance and durability. The metal construction enhances longevity under typical driving conditions. Warranty details should be confirmed with the supplier or manufacturer, as coverage may vary.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944100659381,"sku":"FNMR-RDE043V21","price":28.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE043V21_Fro.jpg?v=1775005283"},{"product_id":"huf-rde044v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE044V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Hyundai, Kia, and Genesis Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE044V21: 433MHz OE Quality TPMS Replacement Sensor is designed to maintain accurate tire pressure monitoring for select Hyundai, Kia, and Genesis models. This metal sensor operates at 433MHz, ensuring compatibility and reliable communication with your vehicle's onboard system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE quality replacement sensor with metal construction for durability\u003c\/li\u003e\n\u003cli\u003eOperates at 433MHz frequency for precise tire pressure data transmission\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Hyundai, Kia, and Genesis models including Elantra, Santa Fe, Sorento, and G80\u003c\/li\u003e\n\u003cli\u003ePart number RDE044V21 ensures exact fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to meet original equipment specifications for seamless integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE044V21: 433MHz OE Quality TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE044V21: 433MHz OE Quality TPMS Replacement Sensor line by Huf offers a direct replacement solution for factory-installed tire pressure monitoring systems. This product line focuses on delivering sensors that match original equipment frequency and material standards, providing reliable performance and compatibility across a range of vehicles. The metal construction enhances sensor longevity and resistance to environmental factors.\u003c\/p\u003e\u003ch2\u003eProduct Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis TPMS sensor is engineered to work with a variety of Hyundai, Kia, and Genesis vehicles, including popular models such as the Hyundai Elantra, Santa Fe, Kona, and the Genesis G80 and Electrified G80. The sensor transmits tire pressure data at 433MHz, which is the standard frequency for these vehicles' monitoring systems. The metal material used in the sensor housing ensures durability and resistance to wear, making it suitable for long-term use in demanding driving conditions.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the RDE044V21 TPMS Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncorrect or no tire pressure readings on the dashboard\u003c\/li\u003e\n\u003cli\u003eTPMS warning light stays illuminated due to sensor failure\u003c\/li\u003e\n\u003cli\u003eSensor battery depletion causing loss of signal\u003c\/li\u003e\n\u003cli\u003eDamage to sensor from road debris or corrosion\u003c\/li\u003e\n\u003cli\u003eReplacement after tire or wheel service requiring sensor reset\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the sensor is programmed or relearned according to the vehicle manufacturer’s procedure\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damaging the sensor during installation\u003c\/li\u003e\n\u003cli\u003eVerify the sensor frequency matches the vehicle’s TPMS system (433MHz)\u003c\/li\u003e\n\u003cli\u003eCheck tire pressure after installation to confirm sensor functionality\u003c\/li\u003e\n\u003cli\u003eConsult vehicle service manual for specific relearn instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf’s RDE044V21 TPMS sensor is manufactured to meet original equipment standards, ensuring reliable performance and fitment. The metal construction provides enhanced durability against environmental exposure. Warranty coverage details should be confirmed with the point of purchase or manufacturer, as they may vary.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944101249205,"sku":"FNMR-RDE044V21","price":28.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE044V21_Fro.jpg?v=1775005283"},{"product_id":"huf-rde046v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE046V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Jaguar and Land Rover Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE046V21 TPMS sensor offers precise tire pressure monitoring for select Jaguar and Land Rover models. Designed to operate at 433MHz, this metal sensor ensures accurate and consistent performance to maintain vehicle safety and efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE quality replacement sensor with 433MHz frequency\u003c\/li\u003e\n\u003cli\u003eDurable metal construction for long-lasting use\u003c\/li\u003e\n\u003cli\u003eCompatible with Jaguar and Land Rover models including Discovery Sport, F-Type, LR4, Range Rover, Range Rover Evoque, Range Rover Sport, XE, XF, and XJ\u003c\/li\u003e\n\u003cli\u003ePart number RDE046V21 for easy identification and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE046V21: 433MHz OE Quality TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE046V21: 433MHz OE Quality TPMS Replacement Sensor line by Huf is engineered to meet original equipment standards for tire pressure monitoring systems. This product line focuses on delivering reliable sensor performance at the 433MHz frequency, which is commonly used in European vehicles such as Jaguar and Land Rover. The metal sensor housing enhances durability and resistance to environmental factors, ensuring consistent operation over time.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis TPMS sensor operates at a frequency of 433MHz, compatible with the tire pressure monitoring systems installed in various Jaguar and Land Rover models. The metal material used in the sensor's construction provides robustness against wear and corrosion, contributing to the sensor's longevity. The sensor is designed to replace original equipment parts, maintaining factory-level accuracy and reliability in tire pressure readings.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure monitoring on Jaguar Discovery Sport and Range Rover models\u003c\/li\u003e\n\u003cli\u003eResolves TPMS warning light issues caused by faulty or damaged sensors\u003c\/li\u003e\n\u003cli\u003ePrevents inaccurate tire pressure readings that can affect vehicle handling and fuel efficiency\u003c\/li\u003e\n\u003cli\u003eSupports safety by ensuring timely alerts for low tire pressure\u003c\/li\u003e\n\u003cli\u003eCompatible replacement for sensors in Jaguar F-Type, XE, XF, and XJ vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Huf RDE046V21 sensor requires proper programming to the vehicle’s TPMS system. It is recommended to use a compatible TPMS tool to activate and relearn the sensor after installation. Ensure the sensor is securely mounted to avoid signal interference. Professional installation is advised for optimal performance and safety compliance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE046V21 TPMS sensor to meet OE quality standards, ensuring reliable operation and durability. While specific warranty details are not provided here, Huf products typically come with manufacturer-backed quality assurance. Verify warranty terms with the supplier or manufacturer at the time of purchase.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944101707957,"sku":"FNMR-RDE046V21","price":28.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE046V21_Fro.jpg?v=1775005283"},{"product_id":"huf-rde047v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE047V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Select European Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE047V21: 433MHz OE TPMS Replacement Sensor is designed to maintain accurate tire pressure monitoring for a range of premium European vehicles. Engineered with metal construction and operating at 433MHz, this sensor ensures consistent performance and durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE replacement sensor with 433MHz frequency for precise tire pressure data\u003c\/li\u003e\n\u003cli\u003eDurable metal material construction for long-lasting reliability\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple makes including Audi, BMW, Porsche, Volkswagen, and more\u003c\/li\u003e\n\u003cli\u003ePart number RDE047V21 for easy identification and fitment\u003c\/li\u003e\n\u003cli\u003eSupports a wide range of models such as BMW 320i, Porsche 718 Cayman, Audi A6, and Volkswagen Atlas\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE047V21: 433MHz OE TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThis product is part of the Huf RDE047V21: 433MHz OE TPMS Replacement Sensor line, which focuses on providing original equipment frequency sensors for accurate tire pressure monitoring. The 433MHz frequency matches the OE specifications for many European vehicles, ensuring seamless integration and reliable communication with the vehicle’s onboard systems.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Huf RDE047V21 sensor is constructed from metal, offering enhanced durability compared to plastic alternatives. Operating at 433MHz, it aligns with the original equipment manufacturer’s frequency requirements for tire pressure monitoring systems in select Audi, Bentley, BMW, Ferrari, Lamborghini, Mini, Porsche, Rolls-Royce, and Volkswagen models. This sensor is designed to replace factory-installed TPMS sensors, maintaining the integrity of the vehicle’s safety and performance systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores accurate tire pressure readings after sensor failure or damage\u003c\/li\u003e\n\u003cli\u003eResolves TPMS warning light issues caused by faulty sensors\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle safety standards for tire monitoring\u003c\/li\u003e\n\u003cli\u003ePrevents uneven tire wear and potential tire damage due to incorrect pressure\u003c\/li\u003e\n\u003cli\u003eSupports proper vehicle handling and fuel efficiency through accurate pressure data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Huf RDE047V21 sensor requires proper programming to the vehicle’s TPMS system. It is recommended to use compatible diagnostic tools to initialize the sensor after installation. Ensure the sensor is securely mounted and the tire is properly balanced to avoid sensor damage. Refer to the vehicle manufacturer’s guidelines for specific installation procedures related to models such as the BMW 335i xDrive or Porsche 718 Boxster.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE047V21 sensor to meet OE standards, ensuring reliable performance and durability. The metal construction enhances sensor lifespan under typical driving conditions. Warranty coverage details should be confirmed with the supplier or manufacturer, as they may vary depending on the point of purchase.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944102363317,"sku":"FNMR-RDE047V21","price":72.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE047V21_Fro_99c357dd-0f29-458f-a32e-49ec2e6df2d9.jpg?v=1775005284"},{"product_id":"huf-rde048v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE048V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Select European and Luxury Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE048V21: 433MHz OE TPMS Replacement Sensor is designed to provide accurate tire pressure monitoring for a wide range of premium vehicles. Engineered with metal construction and operating at 433MHz, this sensor ensures dependable performance and compatibility with various models from brands like BMW, Audi, Porsche, and Tesla.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE-quality metal construction for durability\u003c\/li\u003e\n\u003cli\u003eOperates at 433MHz frequency for precise signal transmission\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple makes including Aston Martin, Ferrari, Lamborghini, and more\u003c\/li\u003e\n\u003cli\u003eDirect replacement for original equipment TPMS sensors\u003c\/li\u003e\n\u003cli\u003ePart number RDE048V21 for easy identification and fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE048V21: 433MHz OE TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThis sensor is part of Huf's RDE048V21: 433MHz OE TPMS Replacement Sensor line, which focuses on providing original equipment frequency and material specifications. The 433MHz operation matches the factory settings of many European and luxury vehicles, ensuring seamless integration and reliable tire pressure data transmission. The metal material enhances sensor longevity and resistance to environmental factors.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Huf RDE048V21 TPMS sensor is crafted from metal, offering robust durability against road conditions and temperature variations. Operating at 433MHz, it aligns with the original equipment specifications for many high-end vehicles, including models such as the BMW 3 Series (325i, 328i, 335i), Audi A4 Quattro, Porsche 911, and Tesla Model S. This sensor replaces factory-installed units, maintaining accurate tire pressure monitoring essential for vehicle safety and performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors\u003c\/li\u003e\n\u003cli\u003eRestores accurate tire pressure readings to prevent uneven tire wear\u003c\/li\u003e\n\u003cli\u003eEliminates false low-pressure warnings on compatible vehicles\u003c\/li\u003e\n\u003cli\u003eEnsures compliance with vehicle safety monitoring systems\u003c\/li\u003e\n\u003cli\u003eSupports proper tire inflation for improved fuel efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your vehicle’s make and model before installation\u003c\/li\u003e\n\u003cli\u003eUse a TPMS programming tool to sync the sensor with the vehicle’s system\u003c\/li\u003e\n\u003cli\u003eHandle the sensor carefully to avoid damage during installation\u003c\/li\u003e\n\u003cli\u003eReplace sensors in sets if multiple units are faulty for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures this TPMS sensor to meet original equipment standards, ensuring reliable operation and durability. While specific warranty details may vary, Huf products typically come with manufacturer-backed quality assurance to support long-term use in vehicles such as the Lamborghini Huracan, Bentley Continental, and Mini Cooper.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944102494389,"sku":"FNMR-RDE048V21","price":94.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE048V21_Fro.jpg?v=1775005284"},{"product_id":"huf-rde051v21-tire-pressure-monitoring-system-sensor","title":"Huf RDE051V21 Tire Pressure Monitoring System Sensor","description":"\u003ch2\u003eReliable TPMS Sensor for Lucid and Tesla Vehicles\u003c\/h2\u003e\u003cp\u003eThe Huf RDE051V21 TPMS sensor offers precise tire pressure monitoring for select Lucid and Tesla models. Designed to operate at 433MHz, this metal sensor ensures consistent performance and compatibility with your vehicle's original equipment system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE quality tire pressure monitoring system sensor\u003c\/li\u003e\n\u003cli\u003eOperates at 433MHz frequency for accurate data transmission\u003c\/li\u003e\n\u003cli\u003eDurable metal construction for long-lasting use\u003c\/li\u003e\n\u003cli\u003eCompatible with Lucid Air and Tesla Model 3, S, and X\u003c\/li\u003e\n\u003cli\u003ePart number RDE051V21 for easy identification and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the RDE051V21: 433MHz OE Quality TPMS Replacement Sensor Line\u003c\/h2\u003e\u003cp\u003eThe RDE051V21: 433MHz OE Quality TPMS Replacement Sensor line by Huf is engineered to meet original equipment standards, providing reliable tire pressure monitoring for vehicles requiring a 433MHz frequency sensor. This product line focuses on delivering precise sensor readings and durability, making it suitable for advanced electric vehicles such as Lucid and Tesla models. The metal material used in these sensors enhances their robustness and longevity under various driving conditions.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis Huf TPMS sensor is constructed from metal, ensuring a sturdy and corrosion-resistant design. Operating at 433MHz, it matches the frequency requirements of specific Lucid and Tesla vehicles, including the Lucid Air and Tesla Model 3, S, and X. The sensor transmits accurate tire pressure data to the vehicle’s onboard system, helping maintain optimal tire performance and safety. The part number RDE051V21 corresponds to this exact sensor, facilitating straightforward replacement and compatibility verification.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for faulty or damaged TPMS sensors in Lucid Air and Tesla Model 3, S, X\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate or intermittent tire pressure readings\u003c\/li\u003e\n\u003cli\u003eRestores proper tire pressure monitoring system functionality\u003c\/li\u003e\n\u003cli\u003ePrevents TPMS warning lights caused by sensor failure\u003c\/li\u003e\n\u003cli\u003eSupports vehicle safety by maintaining correct tire pressure alerts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Huf RDE051V21 sensor should be performed by a qualified technician familiar with TPMS systems. Ensure the sensor frequency (433MHz) matches the vehicle’s requirements before installation. Proper sensor programming or relearning may be necessary to integrate the sensor with the vehicle’s monitoring system. Use appropriate tools to avoid damage to the sensor or valve stem during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eHuf manufactures the RDE051V21 TPMS sensor to meet OE quality standards, ensuring reliable performance and durability. The metal construction supports long-term use under typical driving conditions. Warranty details should be confirmed with the supplier or manufacturer, as coverage may vary based on purchase location and vehicle application.\u003c\/p\u003e","brand":"Huf","offers":[{"title":"Default Title","offer_id":43944102854837,"sku":"FNMR-RDE051V21","price":28.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/H1_RDE051V21_Fro.jpg?v=1775005284"}],"url":"https:\/\/www.partcatalog.com\/collections\/sensors-15.oembed?page=10","provider":"PartCatalog","version":"1.0","type":"link"}