{"title":"Belts and Cooling \u003e Sensors","description":"\u003cp\u003eCoolant sensors monitor two critical functions: the engine coolant temperature sensor (ECT) reads coolant temp and feeds that data to the ECM to control fuel trims, ignition timing, and fan operation, while the coolant level sensor alerts you when the reservoir drops below the safe threshold. ECT sensors fail gradually — resistance drifts out of spec before they fail outright — so the engine may run rich, overheat, or behave erratically before a hard fault code appears. Level sensors tend to fail from corrosion or float damage. When replacing, match the thread pitch and connector type to your application; a sensor with correct resistance range matters more than brand name. OEM sensors are the safe choice for late-model vehicles with sensitive ECMs, but quality aftermarket units from Bosch, Delphi, or Standard Motor Products are well-proven alternatives and typically cost 30–60% less. Always verify fitment by engine code, not just year\/make\/model.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCheck Engine light with codes P0115–P0119 or P1115\u003c\/strong\u003e — these ECT circuit codes point directly to a failing coolant temperature sensor or its wiring harness, and won't clear reliably until the root cause is fixed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoor fuel economy or rich running condition\u003c\/strong\u003e — a sensor stuck reading cold temps tells the ECM the engine never warms up, causing prolonged enrichment, increased fuel consumption, and potential spark plug fouling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine fan running constantly or not at all\u003c\/strong\u003e — the ECM relies on ECT input to trigger electric cooling fans; a failed sensor can leave fans locked on or prevent them from engaging at operating temp.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant warning light or low coolant alert on the dash\u003c\/strong\u003e — if the reservoir is full and the warning still triggers, the coolant level sensor float or its circuit has likely failed rather than there being an actual fluid loss.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRough idle or hesitation after a cold start that clears once the engine warms\u003c\/strong\u003e — an ECT sensor with drifting resistance skews the cold-start fuel map, causing stumbling or stalling during warm-up that disappears at operating temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow often does the engine coolant temperature sensor need to be replaced?\u003c\/strong\u003e\n  ECT sensors don't have a fixed replacement interval — most last 100,000+ miles under normal conditions. Replace on condition: when fault codes appear, when resistance readings fall outside spec (typically 2,000–3,000 ohms at cold, 200–300 ohms at operating temp), or during a major cooling system service.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eIs an OEM coolant sensor worth the price premium over aftermarket?\u003c\/strong\u003e\n  For most applications, a Bosch, Delphi, or Standard Motor Products sensor performs comparably to OEM at $10–$30 vs. $40–$80 OEM. The exception is late-model European vehicles (BMW, Mercedes, VAG) where proprietary resistance curves are tightly toleranced — OEM or OEM-equivalent is the safer call there.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat should I replace at the same time as the coolant temperature sensor?\u003c\/strong\u003e\n  It's good practice to replace the sensor connector pigtail if the terminals show corrosion, and to flush the coolant if it's due (typically every 50,000 miles or 5 years for standard coolant). Total DIY cost including the sensor runs $15–$60 for most domestic and Asian vehicles; the job is typically under 30 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"delphi-hts125-engine-coolant-temperature-sensor","title":"Delphi HTS125 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Ford Super Duty Vehicles\u003c\/h2\u003e\u003cp\u003eThe Delphi HTS125 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for Ford heavy-duty trucks, including the E-350 Super Duty, Excursion, F-250 Super Duty, and F-350 Super Duty models. This sensor ensures your engine management system receives precise data to maintain optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Rectangle design for compatibility with factory wiring harnesses\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals to support reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector housing\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals for proper mating\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for firm and stable sensor placement\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi HTS125 sensor features a threaded nut mounting type, allowing for straightforward installation into the engine block or coolant passage. Its blade terminal type and rectangular female connector are designed to match the original equipment specifications, ensuring compatibility with the Ford E-350 Super Duty, Excursion, F-250 Super Duty, and F-350 Super Duty models. The sensor does not include a wiring harness, so it is intended for use with existing vehicle wiring. The two male terminals provide a stable electrical connection, supporting accurate temperature signal transmission to the engine control unit.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings in Ford Super Duty trucks\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to incorrect coolant temperature input\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and emission control systems\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers caused by faulty temperature sensors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Delphi HTS125 sensor, ensure the engine is cool to avoid injury. Use the threaded nut mounting to securely fasten the sensor in place, and verify the blade terminals are properly connected to the female rectangular connector on the vehicle wiring harness. Since the sensor does not include a wiring harness, inspect existing wiring for damage before installation. Follow the included instruction sheet for torque specifications and installation procedures to maintain sensor integrity and vehicle safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the HTS125 Engine Coolant Temperature Sensor to meet or exceed OEM standards for durability and performance. Each sensor undergoes rigorous testing to ensure reliable operation under demanding conditions typical of Ford Super Duty trucks. Warranty coverage details are provided with the product documentation, offering assurance of quality and support for professional and DIY installations.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43388643377333,"sku":"BBMX-HTS125","price":36.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_HTS125_Fro.jpg?v=1774712725"},{"product_id":"delphi-ts10001-engine-coolant-temperature-sensor","title":"Delphi TS10001 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Ford, Lincoln, and Mercury\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10001 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for a variety of Ford, Lincoln, and Mercury vehicles. This sensor helps maintain optimal engine performance by monitoring coolant temperature and ensuring proper engine management.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Square connector design\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector and Terminal Gender: Female connectors and terminals\u003c\/li\u003e\n\u003cli\u003eIncludes wiring harness for easy integration\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for secure and stable mounting\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Engine coolant temperature sensor, two tubes, wiring harness, and insulation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10001 sensor features a threaded nut mounting type, ensuring a firm and leak-free installation in the engine cooling system. Its blade terminal type and female connector design provide a dependable electrical connection, reducing the risk of signal loss or corrosion. The included wiring harness simplifies the replacement process, making it suitable for professional mechanics and experienced DIYers alike.\u003c\/p\u003e\u003cp\u003eThis sensor is compatible with a wide range of Ford, Lincoln, and Mercury models, including popular vehicles such as the Ford F-150, Explorer, Mustang, and Taurus, as well as Lincoln Continental and Mercury Cougar. The TS10001 part number ensures you receive the correct sensor designed specifically for these applications.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eImproves engine performance by enabling precise fuel mixture adjustments\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of the vehicle’s cooling fan system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eBefore installation, ensure the engine is cool to avoid injury. Disconnect the battery to prevent electrical shorts. Remove the old sensor carefully to avoid damaging the mounting threads. Use the included wiring harness and tubes to connect the sensor securely. Tighten the threaded nut to manufacturer torque specifications to prevent leaks. After installation, verify sensor operation by checking temperature readings and ensuring no warning lights remain on.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi is a recognized brand in automotive components, known for meeting OEM standards. The TS10001 Engine Coolant Temperature Sensor undergoes rigorous testing to ensure durability and accuracy. This sensor comes with a limited warranty covering defects in materials and workmanship, providing confidence in its long-term performance.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204168885,"sku":"BBMX-TS10001","price":39.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10001_Fro_273c5914-10d0-44ec-a188-0d5d1a3b964e.jpg?v=1774725750"},{"product_id":"delphi-ts10032-engine-coolant-temperature-sensor","title":"Delphi TS10032 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Select GM and Isuzu Models\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10032 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's engine cooling system. Compatible with various Buick, Chevrolet, GMC, Isuzu, Oldsmobile, and Pontiac models, this sensor ensures proper engine management and helps maintain optimal performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle female round connector with three male terminals\u003c\/li\u003e\n\u003cli\u003eThreaded nut mounting for easy and stable installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included, compatible with existing vehicle harness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10032 sensor features a pin-type terminal with a single female round connector housing three male terminals, ensuring precise signal transmission. Its threaded nut mounting type allows for straightforward installation and a secure fit in the engine block or cylinder head. This sensor is engineered to meet the specifications required by a range of vehicles including Buick models like the Century and LeSabre, Chevrolet models such as the Camaro and Lumina, GMC's Sonoma and S10, Isuzu Hombre, Oldsmobile Achieva and Cutlass Supreme, and Pontiac Firebird and Grand Prix among others.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMonitors engine coolant temperature for accurate engine control\u003c\/li\u003e\n\u003cli\u003ePrevents engine overheating by providing timely temperature data\u003c\/li\u003e\n\u003cli\u003eHelps maintain fuel efficiency by optimizing engine performance\u003c\/li\u003e\n\u003cli\u003eResolves issues related to faulty temperature readings or sensor failure\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and temperature gauges\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eBefore installation, ensure the engine is cool to avoid injury. The Delphi TS10032 sensor installs via a threaded nut mount, requiring a compatible socket or wrench. Confirm the connector matches the vehicle’s wiring harness; this sensor includes a female round connector with three male terminals but does not come with a wiring harness. Follow the included instruction sheet for torque specifications and wiring connections to ensure proper sensor function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi is a recognized manufacturer of automotive sensors, adhering to industry standards for durability and accuracy. The TS10032 Engine Coolant Temperature Sensor undergoes rigorous testing to ensure reliable performance. Warranty coverage details should be confirmed at the point of purchase, as they may vary by distributor.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204234421,"sku":"BBMX-TS10032","price":28.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10032_Fro_66343f14-c2b1-4f6d-9133-2cd8ec1d7fae.jpg?v=1774725750"},{"product_id":"delphi-ts10064-engine-coolant-temperature-sensor","title":"Delphi TS10064 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10064\u003c\/h2\u003e\u003cp\u003eThe Delphi Engine Coolant Temperature Sensor TS10064 is designed to provide accurate temperature readings for engine management systems. Compatible with a wide range of Nissan and Infiniti models, this sensor ensures reliable performance and precise monitoring of engine coolant temperature.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector with a square shape\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals with male gender\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector for easy plug-in installation\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for stable and secure mounting\u003c\/li\u003e\n\u003cli\u003eWiring Harness: Not included\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10064 engine coolant temperature sensor features a threaded nut mounting type, allowing for a firm and leak-free installation in the engine cooling system. Its blade-type terminals and female square connector ensure a reliable electrical connection with two male terminals, supporting accurate signal transmission to the vehicle’s engine control unit (ECU). This sensor is engineered to meet OEM specifications, making it suitable for various Nissan and Infiniti vehicles including the 350Z, Altima, Maxima, Pathfinder, Rogue, and many others.\u003c\/p\u003e\u003ch2\u003eCompatible Nissan and Infiniti Models\u003c\/h2\u003e\u003cp\u003eThis sensor is compatible with numerous Nissan and Infiniti models such as the 200SX, 240SX, 300ZX, 370Z, Armada, Cube, EX35, FX35, G35, GT-R, I30, M35, Murano, NV200, Pathfinder Armada, Q50, QX80, Sentra, TITAN, Versa, and Xterra. It is an appropriate replacement part for maintaining optimal engine temperature monitoring in these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eHelps resolve erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eSupports proper engine fuel mixture adjustments based on temperature\u003c\/li\u003e\n\u003cli\u003eEliminates engine stalling or rough idling caused by faulty temperature sensors\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine damage due to incorrect temperature information\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation requires removal of the old sensor and threading the Delphi TS10064 sensor into the coolant passage. Ensure the mounting surface is clean and free of debris before installation. Use appropriate torque specifications to avoid damage to the sensor or engine components. Since the wiring harness is not included, verify connector compatibility with your vehicle’s existing wiring. Refer to the included instruction sheet for detailed installation guidance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10064 sensor to meet strict quality standards, ensuring durability and reliable performance under normal operating conditions. While specific warranty details may vary, Delphi typically offers coverage against manufacturing defects. Always consult product documentation or authorized sources for warranty information related to this sensor.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204267189,"sku":"BBMX-TS10064","price":32.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10064_Fro.jpg?v=1774725751"},{"product_id":"delphi-ts10075-engine-coolant-temperature-sensor","title":"Delphi TS10075 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10075\u003c\/h2\u003e\u003cp\u003eThe Delphi Engine Coolant Temperature Sensor TS10075 is designed to provide accurate temperature readings for engine management systems. Compatible with a wide range of vehicles including Acura, Buick, Chevrolet, and Honda models, this sensor ensures reliable engine performance monitoring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Oval\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 2\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut\u003c\/li\u003e\n\u003cli\u003eWiring Harness: Not included\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10075 engine coolant temperature sensor features a threaded nut mounting type for secure installation and a pin-style terminal with two male terminals connecting to a single female oval-shaped connector. This design supports precise temperature measurement critical for engine control units (ECUs) to regulate fuel injection and ignition timing. The sensor is engineered for compatibility with various GM and Honda vehicles, including models like the Chevrolet Silverado 1500, Buick LeSabre, and Acura TL, ensuring proper fitment and function.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis sensor is compatible with multiple makes and models such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAcura TL and Vigor\u003c\/li\u003e\n\u003cli\u003eBuick LeSabre and Century\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 and Camaro\u003c\/li\u003e\n\u003cli\u003eHonda Accord and Civic\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500 and Yukon\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed to replace original equipment sensors in these vehicles, maintaining factory specifications for engine temperature monitoring.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the Delphi TS10075 Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErratic or inaccurate engine temperature readings\u003c\/li\u003e\n\u003cli\u003eEngine overheating warnings or false alerts\u003c\/li\u003e\n\u003cli\u003ePoor fuel economy due to incorrect temperature data\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by faulty coolant temperature sensor\u003c\/li\u003e\n\u003cli\u003eEngine performance issues related to temperature sensor failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before sensor removal or installation\u003c\/li\u003e\n\u003cli\u003eUse the threaded nut mounting to securely fasten the sensor\u003c\/li\u003e\n\u003cli\u003eVerify connector orientation matches the oval female connector on the wiring harness\u003c\/li\u003e\n\u003cli\u003eDo not reuse old wiring harnesses; inspect for damage before installation\u003c\/li\u003e\n\u003cli\u003eFollow the included instruction sheet for torque specifications and wiring guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10075 sensor to meet or exceed OEM standards for durability and accuracy. Each sensor undergoes rigorous testing to ensure reliable operation under various engine conditions. While specific warranty details may vary, Delphi typically offers a limited warranty covering defects in materials and workmanship to provide confidence in product quality.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204332725,"sku":"BBMX-TS10075","price":25.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10075_Fro.jpg?v=1774725752"},{"product_id":"delphi-ts10076-engine-coolant-temperature-sensor","title":"Delphi TS10076 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for GM and More\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10076 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for a variety of vehicles including Buick, Chevrolet, GMC, and Cadillac models. This sensor helps maintain optimal engine performance by monitoring coolant temperature and ensuring proper engine management.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Oval\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 2\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10076 features a threaded nut mounting type for secure installation and a single oval-shaped female connector with two male terminals. It does not include a wiring harness, allowing for direct integration with existing vehicle wiring. This sensor is compatible with a wide range of GM and related makes, including Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, Oldsmobile, Pontiac, Saab, and Saturn. Popular models supported include the Chevrolet Silverado 1500, Cadillac Escalade, Buick LaCrosse, GMC Sierra 2500, and Pontiac G6 among others.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMonitors engine coolant temperature for accurate engine control\u003c\/li\u003e\n\u003cli\u003eHelps prevent engine overheating by providing real-time temperature data\u003c\/li\u003e\n\u003cli\u003eSupports proper fuel mixture adjustments based on coolant temperature\u003c\/li\u003e\n\u003cli\u003eResolves issues related to inaccurate temperature readings or sensor failure\u003c\/li\u003e\n\u003cli\u003eAssists in maintaining efficient engine performance and emissions control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10076 sensor requires removal of the old sensor and threading the new sensor into place using the threaded nut mounting. Ensure the connector is securely attached to avoid electrical connection issues. No wiring harness is included, so verify compatibility with your vehicle’s existing wiring. Follow the included instruction sheet for detailed installation guidance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi is a recognized brand in automotive components, known for meeting OEM standards. The TS10076 Engine Coolant Temperature Sensor undergoes rigorous quality control to ensure reliable performance. Please refer to Delphi’s warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204365493,"sku":"BBMX-TS10076","price":30.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10076_Fro.jpg?v=1774725752"},{"product_id":"delphi-ts10154-engine-coolant-temperature-sensor","title":"Delphi TS10154 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Chrysler and Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10154 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for optimal engine performance. Compatible with a wide range of Chrysler, Dodge, Jeep, and Plymouth models, this sensor ensures precise monitoring of your engine's coolant temperature.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Square design for proper fitment\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals to support accurate signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector for compatibility with male terminals\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals for reliable contact\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for secure and stable sensor placement\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10154 sensor is engineered with a threaded nut mounting type, allowing for a firm and leak-free installation in the engine cooling system. Featuring a blade terminal type and a single square-shaped female connector, this sensor is designed to interface seamlessly with the vehicle’s wiring harness (wiring harness not included). The two male terminals ensure consistent and accurate transmission of temperature data to the engine control unit (ECU). This sensor is compatible with various Chrysler, Dodge, Jeep, and Plymouth models including the Chrysler 300, Dodge Charger, Jeep Grand Cherokee, and Plymouth Neon, among others.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature readings\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings in Chrysler 300M and Dodge Ram 1500\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to faulty temperature sensor signals\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and fuel injection timing in Jeep Wrangler and Dodge Durango\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers caused by sensor malfunctions in Plymouth Voyager\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure engine is cool before removing the old sensor to avoid burns or damage\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to remove and install the threaded nut sensor securely\u003c\/li\u003e\n\u003cli\u003eVerify connector shape and terminal type match the vehicle’s wiring harness before installation\u003c\/li\u003e\n\u003cli\u003eDo not reuse old sensor seals; replace with new gaskets if applicable\u003c\/li\u003e\n\u003cli\u003eConsult the included instruction sheet for detailed installation guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10154 Engine Coolant Temperature Sensor to meet or exceed OEM specifications for durability and performance. Each sensor undergoes rigorous testing to ensure reliable operation under various driving conditions. While specific warranty details may vary, Delphi typically offers a limited warranty covering defects in materials and workmanship. Refer to the product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204529333,"sku":"BBMX-TS10154","price":22.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10154_Fro.jpg?v=1774725753"},{"product_id":"delphi-ts10175-engine-coolant-temperature-sensor","title":"Delphi TS10175 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Chrysler and Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10175 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for optimal engine performance. Compatible with a range of Chrysler, Dodge, Jeep, Mitsubishi, and Plymouth models, this sensor ensures your vehicle's cooling system operates efficiently.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle female square connector with two male terminals\u003c\/li\u003e\n\u003cli\u003eThreaded nut mounting for easy and stable installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included, compatible with existing vehicle harness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10175 sensor features a blade terminal type with a single female square connector housing two male terminals, ensuring a reliable electrical interface. Its threaded nut mounting type allows for straightforward installation and secure fitment. This sensor is compatible with numerous vehicles including Chrysler 300M, Dodge Caravan, Jeep Grand Cherokee, Mitsubishi Eclipse, and Plymouth Voyager among others. The sensor is engineered to integrate seamlessly with the original wiring harness, although the harness itself is not included.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMonitors engine coolant temperature to prevent overheating\u003c\/li\u003e\n\u003cli\u003eHelps regulate engine cooling fan operation\u003c\/li\u003e\n\u003cli\u003eSupports accurate temperature data for engine control units\u003c\/li\u003e\n\u003cli\u003eAddresses issues such as erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eResolves engine performance problems related to faulty temperature sensing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eBefore installation, ensure the engine is cool to avoid injury. The threaded nut mounting allows for direct replacement without modifications. Verify connector compatibility with your vehicle’s wiring harness, noting that the sensor includes a female square connector with two male blade terminals. Follow the included instruction sheet for torque specifications and proper sensor orientation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10175 sensor to meet OEM standards for durability and performance. Each unit undergoes rigorous testing to ensure accurate temperature readings and reliable operation. While specific warranty details may vary, Delphi products typically come with a limited warranty covering defects in materials and workmanship.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204594869,"sku":"BBMX-TS10175","price":36.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10175_Fro.jpg?v=1774725754"},{"product_id":"delphi-ts10180-engine-coolant-temperature-sensor","title":"Delphi TS10180 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Acura, Honda, and Isuzu\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10180 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's engine management system. Compatible with various Acura, Honda, and Isuzu models, this sensor ensures optimal engine performance and helps prevent overheating issues.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle female round connector with two male terminals\u003c\/li\u003e\n\u003cli\u003eThreaded nut mounting type for easy installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10180 sensor features a blade terminal type with a single female round connector housing two male terminals, ensuring a reliable electrical interface. Its threaded nut mounting type allows for straightforward installation and secure fitment. This sensor is compatible with a wide range of Acura, Honda, and Isuzu vehicles, including popular models such as the Honda Accord, Civic, CR-V, Odyssey, and Acura MDX, RL, and TL. The sensor's precise temperature readings help the engine control unit regulate fuel injection and ignition timing effectively.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eImproves engine performance by enabling proper fuel mixture adjustments\u003c\/li\u003e\n\u003cli\u003eAddresses check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003cli\u003ePrevents poor fuel economy caused by incorrect temperature readings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10180 sensor requires removal of the old sensor and threading the new sensor into place using the threaded nut mounting. Ensure the electrical connector matches the blade terminal type and the female round connector fits securely over the two male terminals. Since the wiring harness is not included, verify your existing harness is compatible before installation. Follow the included instruction sheet for torque specifications and safety precautions.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10180 Engine Coolant Temperature Sensor to meet OEM specifications, ensuring reliable performance and durability. While specific warranty details may vary, Delphi products typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204627637,"sku":"BBMX-TS10180","price":38.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10180_Fro.jpg?v=1774725754"},{"product_id":"delphi-ts10198-engine-coolant-temperature-sensor","title":"Delphi TS10198 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10198\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10198 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for engine management systems. Compatible with a wide range of vehicles including Toyota Camry, Lexus RX330, and Ford Thunderbird, this sensor ensures reliable engine performance monitoring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Square design for precise fitment\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals to support accurate signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector for compatibility with male wiring harnesses\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals for proper electrical contact\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for secure and stable sensor placement\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10198 sensor is engineered to monitor the temperature of the engine coolant, providing critical data to the vehicle’s engine control unit (ECU). Featuring a threaded nut mounting type, it ensures a firm and leak-free installation. The sensor’s blade terminal type and two-terminal configuration facilitate reliable electrical connections, minimizing the risk of signal loss or interference. Its single female square connector is designed to fit seamlessly with the corresponding male wiring harness connectors found in vehicles such as the Toyota 4Runner, Lexus ES300, and Ford F-150.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis engine coolant temperature sensor is compatible with various makes and models, including Chevrolet, Ford, Geo, Kia, Lexus, Lincoln, Mazda, Pontiac, Suzuki, and Toyota. Notable compatible models include the Toyota Camry, Lexus RX400h, Ford Thunderbird, Mazda 626, and Pontiac Sunfire. The Delphi TS10198 is suitable for vehicles requiring a sensor with a blade terminal type, two terminals, and a threaded nut mounting style.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the TS10198 Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngine overheating due to inaccurate coolant temperature readings\u003c\/li\u003e\n\u003cli\u003ePoor fuel efficiency caused by incorrect temperature data\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by faulty temperature sensor signals\u003c\/li\u003e\n\u003cli\u003eEngine stalling or rough idling related to temperature sensor failure\u003c\/li\u003e\n\u003cli\u003eCooling fan malfunction due to improper temperature input\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10198 sensor requires removal of the old sensor and careful threading of the new sensor into the engine block or coolant passage. Ensure the sensor’s threaded nut is tightened securely to prevent coolant leaks. The blade terminals should be connected firmly to the vehicle’s wiring harness, matching the female connector on the sensor with the male terminals on the harness. Refer to the included instruction sheet for specific torque specifications and wiring details. No wiring harness is included, so use the existing vehicle harness for connection.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10198 sensor to meet OEM standards for durability and performance. Each sensor undergoes rigorous testing to ensure accurate temperature readings and reliable operation under various driving conditions. While specific warranty details are not provided here, Delphi products typically come with a limited warranty covering defects in materials and workmanship. Consult the product documentation or vehicle service provider for warranty information.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204758709,"sku":"BBMX-TS10198","price":33.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10198_Fro_ada09c9d-05ce-470e-8298-d1354eaf1e62.jpg?v=1774725754"},{"product_id":"delphi-ts10236-engine-coolant-temperature-sensor","title":"Delphi TS10236 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Audi and Volkswagen\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10236 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's cooling system. Compatible with a range of Audi and Volkswagen models, this sensor ensures optimal engine performance and helps prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1 with an oval shape for precise fitment\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 4 male terminals for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female to match vehicle wiring harness\u003c\/li\u003e\n\u003cli\u003eMounting Type: Push on for straightforward installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor, seal, and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10236 sensor features a blade terminal type and a single oval-shaped female connector, designed to interface seamlessly with the vehicle’s existing wiring. With four male terminals, it ensures stable and accurate data transmission to the engine control unit. The push-on mounting type allows for a secure and efficient installation process without the need for additional hardware. This sensor is compatible with various Audi and Volkswagen models, including the Audi A4, A6, A8 Quattro, Allroad Quattro, S4, S6, S8, TT, and Volkswagen Golf, Jetta, Passat, Beetle, Cabrio, EuroVan, R32, and RS6.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMonitors engine coolant temperature to prevent overheating\u003c\/li\u003e\n\u003cli\u003eHelps maintain optimal engine performance and fuel efficiency\u003c\/li\u003e\n\u003cli\u003ePrevents engine damage caused by inaccurate temperature readings\u003c\/li\u003e\n\u003cli\u003eResolves issues related to erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and temperature-dependent systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10236 sensor is straightforward due to its push-on mounting type and blade terminal design. Ensure the engine is cool before beginning installation to avoid injury. Use the included seal to prevent coolant leaks and follow the instruction sheet carefully for proper connector alignment. Since the wiring harness is not included, verify compatibility with your vehicle’s existing harness before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10236 Engine Coolant Temperature Sensor to meet OEM specifications, ensuring reliable performance and durability. The product includes a seal and instruction sheet to support proper installation. Please refer to Delphi’s warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204791477,"sku":"BBMX-TS10236","price":20.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10236_Ang.jpg?v=1774725755"},{"product_id":"delphi-ts10245-engine-coolant-temperature-sensor","title":"Delphi TS10245 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Volkswagen Models\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10245 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for Volkswagen Cabrio, Golf, and Jetta vehicles. This sensor ensures optimal engine performance by monitoring coolant temperature and relaying critical data to the engine control unit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle connector with a square shape for precise fitment\u003c\/li\u003e\n\u003cli\u003eFour terminals with male and female gender configuration\u003c\/li\u003e\n\u003cli\u003ePush-on mounting type for straightforward installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor, clip, and instruction sheet\u003c\/li\u003e\n\u003cli\u003eCompatible with Volkswagen Cabrio, Golf, and Jetta models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Features\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10245 sensor features a blade terminal type that ensures a reliable electrical connection within the vehicle’s wiring harness. It has one square-shaped connector with four terminals, combining male and female terminal genders to match the original equipment specifications. The push-on mounting type allows for easy and secure installation without the need for additional hardware. This sensor does not include a wiring harness, so it is designed to integrate seamlessly with the existing vehicle wiring. The package includes the sensor itself, a clip for mounting stability, and an instruction sheet to assist with installation.\u003c\/p\u003e\u003ch2\u003eCompatible Volkswagen Models and Applications\u003c\/h2\u003e\u003cp\u003eThis engine coolant temperature sensor is compatible with Volkswagen Cabrio, Golf, and Jetta models, making it a suitable replacement part for maintaining accurate engine temperature monitoring. The TS10245 part number ensures you receive the correct sensor designed specifically for these vehicles, helping to maintain engine efficiency and prevent overheating issues.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the TS10245 Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInaccurate engine temperature readings causing poor fuel efficiency\u003c\/li\u003e\n\u003cli\u003eEngine overheating due to faulty coolant temperature monitoring\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by sensor failure\u003c\/li\u003e\n\u003cli\u003eErratic engine performance related to temperature sensor faults\u003c\/li\u003e\n\u003cli\u003eCooling fan malfunction caused by incorrect temperature data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10245 sensor is straightforward due to its push-on mounting type and blade terminal design. Ensure the vehicle is cool before beginning installation to avoid injury. Disconnect the battery to prevent electrical shorts. Carefully remove the old sensor and clean the mounting area before installing the new sensor. Use the included clip to secure the sensor in place and refer to the instruction sheet for detailed guidance. Verify all electrical connections are secure before reconnecting the battery and testing the sensor operation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10245 Engine Coolant Temperature Sensor to meet or exceed OEM standards for durability and performance. Each sensor undergoes rigorous testing to ensure reliable operation under various driving conditions. While specific warranty details may vary, Delphi typically offers a limited warranty covering defects in materials and workmanship to provide confidence in the product’s quality and longevity.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204824245,"sku":"BBMX-TS10245","price":23.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10245_Ang.jpg?v=1774725755"},{"product_id":"delphi-ts10250-engine-coolant-temperature-sensor","title":"Delphi TS10250 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Select Vehicles\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10250 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for efficient engine management. Compatible with various BMW, Honda, Hyundai, Isuzu, Porsche, and Volkswagen models, this sensor ensures proper engine performance and helps prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle female rectangular connector with two male terminals\u003c\/li\u003e\n\u003cli\u003eThreaded nut mounting for stable installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10250 sensor features a blade terminal type with a single female rectangular connector housing two male terminals, ensuring a reliable electrical interface. Its threaded nut mounting type allows for straightforward installation and secure fitment. This sensor is compatible with a range of vehicles including BMW models 924, 944, and 968; Honda models such as the M5; Hyundai Elantra and Accent; Isuzu Amigo, Impulse, Rodeo, Trooper, and Pickup; Porsche 924, 944, and 968; and Volkswagen Vanagon and Scoupe. The package includes the sensor itself along with an instruction sheet to assist with installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps monitor engine coolant temperature to prevent overheating\u003c\/li\u003e\n\u003cli\u003eSupports engine control unit (ECU) in adjusting fuel injection and ignition timing\u003c\/li\u003e\n\u003cli\u003eResolves issues related to inaccurate temperature readings causing poor engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents engine stalling or rough idling due to faulty temperature data\u003c\/li\u003e\n\u003cli\u003eAssists in maintaining optimal engine operating temperature for emissions control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eBefore installation, ensure the engine is cool to avoid injury. The Delphi TS10250 sensor mounts using a threaded nut, so proper torque specifications should be followed to avoid damage. The blade terminal type requires a compatible female connector with two male terminals; verify connector shape and gender for compatibility. Wiring harness is not included, so use the existing harness or source separately if needed. Refer to the included instruction sheet for detailed installation guidance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10250 Engine Coolant Temperature Sensor to meet OEM standards for fit, form, and function. While specific warranty details are not provided here, Delphi products typically come with a limited warranty covering defects in materials and workmanship. For warranty information, consult the product documentation or Delphi directly.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204889781,"sku":"BBMX-TS10250","price":25.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10250_Ang.jpg?v=1774725755"},{"product_id":"delphi-ts10253-engine-coolant-temperature-sensor","title":"Delphi TS10253 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Select GM and Saab Models\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10253 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for efficient engine management. Compatible with various Buick, Cadillac, Chevrolet, GMC, Pontiac, Saab, and Saturn vehicles, this sensor ensures proper engine performance and helps prevent overheating.\u003c\/p\u003e\u003ch2\u003eKey Features of Delphi TS10253 Engine Coolant Temperature Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Oval design to match factory specifications\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector for compatibility with vehicle wiring\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals for proper mating\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for secure and stable sensor placement\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring Harness: Not included, designed to integrate with existing vehicle harness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Delphi TS10253 Sensor\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10253 Engine Coolant Temperature Sensor is engineered to meet OEM standards, providing precise temperature data to the engine control unit (ECU). Its blade terminal type and oval-shaped female connector ensure a proper fit with the vehicle’s wiring harness, minimizing installation issues. The sensor mounts securely using a threaded nut, maintaining stable contact with the engine coolant system. This sensor is compatible with a wide range of vehicles including Buick LaCrosse, Cadillac CTS, Chevrolet Silverado 2500 HD, GMC Sierra 3500 HD, Pontiac G8, Saab 9-3 and 9-5, and Saturn Vue, among others.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMonitors engine coolant temperature for optimal engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents engine overheating by providing accurate temperature readings\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper fuel mixture and emissions control\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings or warning lights\u003c\/li\u003e\n\u003cli\u003eReplaces faulty or damaged temperature sensors in compatible GM and Saab models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before beginning installation to avoid burns\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery to prevent electrical shorts during replacement\u003c\/li\u003e\n\u003cli\u003eUse the included instruction sheet for proper installation steps\u003c\/li\u003e\n\u003cli\u003eVerify the sensor’s threaded nut is tightened securely to prevent leaks\u003c\/li\u003e\n\u003cli\u003eCheck connector compatibility with the vehicle’s wiring harness before installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10253 sensor to meet strict quality standards, ensuring reliable performance and durability. The product includes an instruction sheet to assist with installation. While specific warranty details may vary, Delphi typically offers coverage against manufacturing defects. Refer to the product documentation or contact the vehicle service provider for warranty specifics.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204955317,"sku":"BBMX-TS10253","price":31.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10253_Ang.jpg?v=1774725756"},{"product_id":"delphi-ts10254-engine-coolant-temperature-sensor","title":"Delphi TS10254 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10254\u003c\/h2\u003e\u003cp\u003eThe Delphi Engine Coolant Temperature Sensor TS10254 is designed to provide accurate temperature readings for engine management systems. Compatible with Chevrolet and Isuzu vehicles, including models like the Aveo, Aveo5, Amigo, Rodeo, and Rodeo Sport, this sensor ensures reliable engine performance monitoring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Oval\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 2\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut\u003c\/li\u003e\n\u003cli\u003eWiring Harness Included: No\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Engine coolant temperature sensor, instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Features\u003c\/h2\u003e\u003cp\u003eThe TS10254 sensor features a threaded nut mounting type, allowing secure installation in the engine cooling system. It includes a single oval-shaped female connector with two male pin terminals, designed for precise electrical connections. This sensor does not come with a wiring harness, so ensure compatibility with your vehicle’s existing wiring setup. The package includes the sensor itself and an instruction sheet to assist with installation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis engine coolant temperature sensor is compatible with select Chevrolet and Isuzu models, specifically the Chevrolet Aveo, Aveo5, and Amigo, as well as the Isuzu Rodeo and Rodeo Sport. Using the Delphi TS10254 sensor in these vehicles helps maintain accurate engine temperature readings, which are critical for optimal engine control and fuel efficiency.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the TS10254 Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncorrect engine temperature readings causing poor fuel economy\u003c\/li\u003e\n\u003cli\u003eEngine overheating due to faulty temperature monitoring\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by sensor failure\u003c\/li\u003e\n\u003cli\u003eErratic engine performance related to temperature sensor faults\u003c\/li\u003e\n\u003cli\u003eCooling fan malfunction due to inaccurate temperature data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation requires removing the old sensor and threading the Delphi TS10254 sensor into place using the threaded nut mounting. Ensure the electrical connector matches the oval female connector with two male pin terminals. Since the wiring harness is not included, verify that your vehicle’s wiring is compatible and in good condition before installation. Follow the included instruction sheet carefully to avoid damage and ensure proper sensor function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10254 sensor to meet OEM specifications for reliable performance. While specific warranty details are not provided here, Delphi products typically come with a limited warranty covering defects in materials and workmanship. For exact warranty terms, consult the product documentation or Delphi directly.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389204988085,"sku":"BBMX-TS10254","price":31.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10254_Ang.jpg?v=1774725756"},{"product_id":"delphi-ts10258-engine-coolant-temperature-sensor","title":"Delphi TS10258 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10258\u003c\/h2\u003e\u003cp\u003eThe Delphi Engine Coolant Temperature Sensor TS10258 is designed for precise temperature monitoring in select BMW models. This sensor features a threaded nut mounting type and a reliable pin terminal connection, ensuring accurate engine temperature readings for optimal vehicle performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Round\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 4\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut\u003c\/li\u003e\n\u003cli\u003eWiring Harness Included: No\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Engine coolant temperature sensor, instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10258 engine coolant temperature sensor is engineered to provide accurate temperature data to the engine control unit (ECU) in various BMW vehicles, including the 318i, 323i, 328i, 525i, 530i, 740i, M3, M5, X5, and Z8 models. Its pin-type terminal and round female connector with four male terminals ensure a secure and stable electrical connection. The sensor mounts via a threaded nut, allowing for straightforward installation and reliable fitment. Note that this sensor does not include a wiring harness, so existing vehicle harnesses must be used.\u003c\/p\u003e\u003ch2\u003eCompatible BMW Models and Applications\u003c\/h2\u003e\u003cp\u003eThis engine coolant temperature sensor TS10258 is compatible with a range of BMW models, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBMW 318i, 318is, 318ti\u003c\/li\u003e\n\u003cli\u003eBMW 323i, 323is\u003c\/li\u003e\n\u003cli\u003eBMW 328i, 328is\u003c\/li\u003e\n\u003cli\u003eBMW 525i, 528i, 530i, 540i\u003c\/li\u003e\n\u003cli\u003eBMW 740i, 740iL, 750iL\u003c\/li\u003e\n\u003cli\u003eBMW 840Ci, 850Ci\u003c\/li\u003e\n\u003cli\u003eBMW M3, M5\u003c\/li\u003e\n\u003cli\u003eBMW X5, Z3, Z8\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInaccurate engine temperature readings causing poor fuel efficiency\u003c\/li\u003e\n\u003cli\u003eEngine overheating due to faulty temperature monitoring\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by sensor failure\u003c\/li\u003e\n\u003cli\u003eErratic engine performance related to temperature sensor faults\u003c\/li\u003e\n\u003cli\u003eCooling system malfunctions linked to temperature sensor issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10258 sensor requires removal of the old sensor and replacement with the new unit using the threaded nut mounting. Ensure the connector is properly aligned with the round female connector and that all four terminals are securely connected. Since the wiring harness is not included, verify the existing harness is in good condition before installation. Follow the included instruction sheet for torque specifications and safety precautions.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10258 sensor to meet OEM standards for durability and performance. Each sensor undergoes rigorous testing to ensure reliable operation under various driving conditions. Warranty coverage details should be confirmed at the point of purchase, as they may vary by distributor.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205184693,"sku":"BBMX-TS10258","price":33.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10258_Ang.jpg?v=1774725756"},{"product_id":"delphi-ts10263-engine-coolant-temperature-sensor","title":"Delphi TS10263 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10263\u003c\/h2\u003e\u003cp\u003eThe Delphi Engine Coolant Temperature Sensor TS10263 is designed for precise temperature monitoring in select Mercedes-Benz models. This sensor features a threaded nut mounting type and a reliable pin terminal connection, ensuring accurate engine temperature readings for optimal vehicle performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1 with a round shape for easy installation\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 4 terminals with male gender\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female for compatibility with vehicle wiring\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for stable sensor placement\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10263 engine coolant temperature sensor is engineered to provide accurate temperature data to the engine control unit (ECU) in various Mercedes-Benz vehicles, including models such as the 190E, 300E, 500SL, and S600. Featuring a single round female connector with four male pin terminals, this sensor ensures a secure and reliable electrical connection. The threaded nut mounting type allows for straightforward installation and a firm fit within the engine cooling system. While the wiring harness is not included, the sensor is compatible with existing vehicle harnesses designed for these Mercedes-Benz models.\u003c\/p\u003e\u003ch2\u003eCompatible Mercedes-Benz Models\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e190E\u003c\/li\u003e\n\u003cli\u003e260E\u003c\/li\u003e\n\u003cli\u003e300CE, 300E, 300SE, 300SEL, 300SL, 300TE\u003c\/li\u003e\n\u003cli\u003e400E, 400SE, 400SEL\u003c\/li\u003e\n\u003cli\u003e420SEL, 500E, 500SEC, 500SEL, 500SL\u003c\/li\u003e\n\u003cli\u003e560SEC, 560SEL, 560SL\u003c\/li\u003e\n\u003cli\u003e600SEC, 600SEL, 600SL\u003c\/li\u003e\n\u003cli\u003eE420, E500, S420, S500, S600\u003c\/li\u003e\n\u003cli\u003eSL500, SL600\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMonitors engine coolant temperature for efficient engine management\u003c\/li\u003e\n\u003cli\u003ePrevents engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eHelps maintain optimal fuel efficiency and emissions control\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and temperature gauges\u003c\/li\u003e\n\u003cli\u003eResolves issues related to erratic temperature readings or sensor failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10263 sensor requires removal of the old sensor and threading the new sensor into place using the threaded nut mounting. Ensure the sensor terminals align correctly with the female round connector on the vehicle wiring harness. It is recommended to verify the absence of wiring harness damage before installation. No wiring harness is included, so use the existing harness compatible with the Mercedes-Benz model. Follow the included instruction sheet for torque specifications and connection details.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10263 sensor to meet OEM standards for durability and performance. Each sensor undergoes rigorous testing to ensure reliable operation under various engine conditions. This product includes an instruction sheet to assist with proper installation. Warranty coverage details should be confirmed at the point of purchase, as they may vary.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205217461,"sku":"BBMX-TS10263","price":29.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10263_Ang.jpg?v=1774725756"},{"product_id":"delphi-ts10269-engine-coolant-temperature-sensor","title":"Delphi TS10269 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10269\u003c\/h2\u003e\u003cp\u003eThe Delphi Engine Coolant Temperature Sensor TS10269 is designed for precise temperature monitoring in various Mercedes-Benz models. This sensor features a push-on mounting type and an oval-shaped female connector with four male terminals, ensuring reliable electrical connections for accurate engine management.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Oval\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 4\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Push on\u003c\/li\u003e\n\u003cli\u003eWiring Harness Included: No\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Engine coolant temperature sensor, instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10269 engine coolant temperature sensor is engineered to provide accurate temperature readings critical for engine control systems. Its pin-type terminals and oval female connector with four male terminals facilitate secure and stable electrical connections. The push-on mounting type allows for straightforward installation without the need for additional hardware. This sensor is compatible with a wide range of Mercedes-Benz vehicles, including AMG models such as the A35 AMG, AMG GT series, C43 AMG, and GLS63 AMG, among others. The sensor does not include a wiring harness, so ensure compatibility with your vehicle's existing wiring setup.\u003c\/p\u003e\u003ch2\u003eCompatible Mercedes-Benz Models\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMercedes-Benz A35 AMG, A220\u003c\/li\u003e\n\u003cli\u003eAMG GT, AMG GT 43, AMG GT 53, AMG GT 63, AMG GT 63 S, AMG GT Black Series\u003c\/li\u003e\n\u003cli\u003eC32 AMG, C43 AMG, C55 AMG, C63 AMG, C63 AMG S\u003c\/li\u003e\n\u003cli\u003eGLS63 AMG, G63 AMG, G550, G500\u003c\/li\u003e\n\u003cli\u003eMaybach GLS600, Maybach S560, Maybach S580\u003c\/li\u003e\n\u003cli\u003eAdditional models including E-Class, CLS, CLA, GLE, and Sprinter series\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMonitors engine coolant temperature for optimal engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eHelps regulate fuel injection and ignition timing based on coolant temperature\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings or sensor-related engine codes\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and emission control systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before sensor replacement to avoid burns\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery prior to installation to prevent electrical shorts\u003c\/li\u003e\n\u003cli\u003eUse the push-on mounting type to secure the sensor firmly in place\u003c\/li\u003e\n\u003cli\u003eVerify connector orientation matches the oval female connector with four terminals\u003c\/li\u003e\n\u003cli\u003eConsult the included instruction sheet for detailed installation guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10269 sensor to meet OEM specifications for durability and performance. While specific warranty details may vary, Delphi products typically come with a limited warranty covering defects in materials and workmanship. This sensor undergoes rigorous testing to ensure reliable operation within the demanding environments of Mercedes-Benz engines.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205250229,"sku":"BBMX-TS10269","price":23.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10269_Fro.jpg?v=1774725757"},{"product_id":"delphi-ts10270-engine-coolant-temperature-sensor","title":"Delphi TS10270 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for BMW and Land Rover\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10270 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for optimal engine performance. Compatible with a wide range of BMW and Land Rover models, this sensor ensures precise monitoring of coolant temperature to help maintain engine efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Rectangle design for compatibility with factory wiring harnesses\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals supporting reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector to match male terminals on vehicle wiring\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals on the sensor side\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for secure and stable sensor placement\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10270 sensor features a threaded nut mounting type, allowing for a firm and leak-free installation in the engine cooling system. Its blade terminal type and rectangular female connector are engineered to fit precisely with the original equipment wiring harnesses found in BMW models such as the 3 Series (320i, 328i, 335i), 5 Series (525i, 535i, 550i), 6 Series (640i, 650i), 7 Series (740i, 750i), and M Series (M2, M3, M4, M5, M6), as well as Land Rover vehicles including the Discovery and Freelander. The sensor’s two male terminals ensure consistent electrical contact for accurate temperature data transmission to the engine control unit.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature readings\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings or warning light activations\u003c\/li\u003e\n\u003cli\u003eSupports proper engine fuel mixture adjustments based on coolant temperature\u003c\/li\u003e\n\u003cli\u003eEliminates engine performance issues related to faulty temperature sensor signals\u003c\/li\u003e\n\u003cli\u003eAssists in maintaining optimal engine operating temperature for emissions control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10270 sensor requires removal of the old sensor and replacement with the new unit using the threaded nut mounting. Ensure the engine is cool before beginning installation to avoid burns or coolant leaks. Verify the connector shape and terminal configuration match the vehicle’s wiring harness to ensure proper fitment. No wiring harness is included, so use the existing vehicle harness for connection. Follow the included instruction sheet for torque specifications and installation procedures.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi is a recognized manufacturer of automotive sensors, known for meeting OEM standards. The TS10270 Engine Coolant Temperature Sensor undergoes rigorous quality control to ensure durability and accurate performance. This sensor is backed by Delphi’s limited warranty, providing coverage against defects in materials and workmanship under normal use.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205282997,"sku":"BBMX-TS10270","price":24.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10270_Ang_6f33a6ac-faaa-4fed-bd84-d7b73b56fc32.jpg?v=1774725757"},{"product_id":"delphi-ts10278-engine-coolant-temperature-sensor","title":"Delphi TS10278 Engine Coolant Temperature Sensor - Rear","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Audi, Porsche, and Volkswagen\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10278 engine coolant temperature sensor is designed to provide accurate temperature readings for your vehicle's cooling system. Compatible with a wide range of Audi, Porsche, and Volkswagen models, this sensor ensures optimal engine performance and helps prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector with an oval shape\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector with two male terminals\u003c\/li\u003e\n\u003cli\u003eMounting Type: Push-on installation for straightforward replacement\u003c\/li\u003e\n\u003cli\u003ePosition: Rear sensor location for precise temperature monitoring\u003c\/li\u003e\n\u003cli\u003ePackage Includes: Engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring Harness: Not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of Delphi TS10278 Engine Coolant Temperature Sensor\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10278 sensor is engineered to monitor the temperature of the engine coolant accurately. Featuring a blade terminal type and a single oval-shaped female connector with two male terminals, it ensures a reliable electrical connection. The push-on mounting type allows for easy installation in the rear position of the engine bay. This sensor is compatible with various Audi models such as the A3, A4, A5, A6, A7, and A8 Quattro, as well as Porsche models including the Cayenne, Macan, Panamera, and Volkswagen vehicles like the Golf, Jetta, Tiguan, and Atlas. The sensor does not include a wiring harness, so ensure your vehicle’s existing harness is compatible before installation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eSupports proper engine management and fuel efficiency\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings or warning light activations\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to faulty temperature sensing\u003c\/li\u003e\n\u003cli\u003ePrevents potential engine damage caused by incorrect coolant temperature information\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before attempting sensor replacement\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery to avoid electrical shorts during installation\u003c\/li\u003e\n\u003cli\u003eUse the push-on mounting type to securely attach the sensor in the rear position\u003c\/li\u003e\n\u003cli\u003eVerify connector compatibility with the vehicle’s wiring harness prior to installation\u003c\/li\u003e\n\u003cli\u003eFollow the included instruction sheet for proper installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10278 engine coolant temperature sensor to meet OEM specifications, ensuring reliable performance and durability. While specific warranty details may vary, Delphi products typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or contact the supplier for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205315765,"sku":"BBMX-TS10278","price":25.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10278_Fro.jpg?v=1774725757"},{"product_id":"delphi-ts10279-engine-coolant-temperature-sensor","title":"Delphi TS10279 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Audi and Volkswagen\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10279 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's cooling system. Compatible with various Audi and Volkswagen models, this sensor ensures optimal engine performance and helps prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle oval-shaped female connector for easy installation\u003c\/li\u003e\n\u003cli\u003eFour male terminals for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003ePush-on mounting type for straightforward replacement\u003c\/li\u003e\n\u003cli\u003eIncludes sensor, clip, and instruction sheet for complete installation\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis engine coolant temperature sensor features a blade terminal type and a single oval female connector, designed to fit seamlessly with the existing wiring harness of your vehicle. The four male terminals ensure consistent and accurate data transmission to the engine control unit. The push-on mounting type allows for a secure fit without the need for additional hardware. The package includes the sensor itself, a clip for mounting stability, and an instruction sheet to guide through the installation process.\u003c\/p\u003e\u003cp\u003eThe Delphi TS10279 sensor is compatible with a range of Audi and Volkswagen vehicles, including Audi A4, A4 Quattro, A6, A6 Quattro, and Volkswagen Beetle, Cabriolet, Golf, Jetta, and Passat models. This compatibility ensures that the sensor meets the specific requirements of these vehicles’ cooling systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature readings\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings or sensor failure issues\u003c\/li\u003e\n\u003cli\u003eSupports proper engine management and fuel efficiency\u003c\/li\u003e\n\u003cli\u003eAddresses check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003cli\u003eImproves overall engine performance and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10279 sensor is straightforward due to its push-on mounting design and blade terminal connections. Ensure the vehicle is cool before beginning installation to avoid injury. Disconnect the battery to prevent electrical shorts. Carefully remove the old sensor and clean the mounting area before installing the new sensor. Use the included clip to secure the sensor in place and refer to the instruction sheet for detailed guidance. Note that the wiring harness is not included, so reuse the existing harness connectors.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi is a recognized brand in automotive components, known for manufacturing reliable and durable parts. The TS10279 Engine Coolant Temperature Sensor undergoes rigorous quality control to meet OEM standards. While specific warranty details may vary, Delphi typically offers coverage against manufacturing defects to ensure customer confidence in product performance.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205446837,"sku":"BBMX-TS10279","price":41.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10279_Ang.jpg?v=1774725758"},{"product_id":"delphi-ts10281-engine-coolant-temperature-sensor","title":"Delphi TS10281 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Volkswagen Models\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10281 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your Volkswagen vehicle. Compatible with popular models such as the Cabriolet, Corrado, EuroVan, Golf, Jetta, Passat, and Vanagon, this sensor ensures your engine management system receives precise data for optimal performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle female rectangular connector with two male terminals\u003c\/li\u003e\n\u003cli\u003ePush-on mounting type for straightforward installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor, clip, and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe TS10281 sensor features a blade terminal type with a single female rectangular connector housing two male terminals, ensuring compatibility with the original wiring harness of Volkswagen vehicles. Its push-on mounting type allows for easy replacement without the need for additional hardware. This sensor is engineered to meet the specifications required by Volkswagen models including the Cabriolet, Corrado, EuroVan, Golf, Jetta, Passat, and Vanagon, making it a suitable choice for maintaining accurate engine temperature monitoring.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings in Volkswagen Cabriolet and Golf models\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to faulty temperature sensor signals\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of the engine cooling fan and fuel injection system\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers caused by sensor malfunctions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10281 sensor is straightforward due to its push-on mounting design. Ensure the engine is cool before removal to avoid injury. Disconnect the battery before starting the replacement process. Carefully unplug the existing sensor’s connector and remove the sensor by pushing it off its mounting point. Install the new sensor by pushing it firmly into place and reconnect the connector. Verify the connection is secure and test the sensor operation by starting the engine and monitoring temperature readings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10281 Engine Coolant Temperature Sensor to meet OEM standards for durability and performance. Each sensor undergoes rigorous testing to ensure reliable operation under various driving conditions. While specific warranty details may vary, Delphi typically offers coverage against manufacturing defects to provide confidence in product quality.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205479605,"sku":"BBMX-TS10281","price":16.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10281_Ang.jpg?v=1774725758"},{"product_id":"delphi-ts10287-engine-coolant-temperature-sensor","title":"Delphi TS10287 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Land Rover and Mazda\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10287 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's cooling system. Compatible with select Land Rover and Mazda models, this sensor ensures optimal engine performance and helps prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Square connector design for precise fit\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals to support accurate signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector for compatibility with male wiring harnesses\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals for reliable contact\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for secure and stable sensor placement\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10287 sensor is engineered to monitor the temperature of the engine coolant accurately. Featuring a threaded nut mounting type, it ensures a firm and leak-free installation in the cooling system. The sensor’s blade terminal type and two-terminal configuration provide dependable electrical connections, while the female square connector matches the vehicle’s wiring harness for seamless integration. This sensor is compatible with various Land Rover models such as the LR3 and Mazda vehicles including the Mazda 3, 5, 6, CX-7, and MX-5 Miata, making it a versatile choice for maintaining engine temperature regulation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings in Land Rover LR3 and Mazda CX-7\u003c\/li\u003e\n\u003cli\u003eImproves engine control unit (ECU) response for better fuel efficiency in Mazda 3 and 6\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and temperature-dependent systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10287 sensor requires removal of the old sensor and careful threading of the new sensor into the mounting location. Ensure the threaded nut is tightened securely to prevent coolant leaks. The sensor features a female square connector with two male blade terminals; verify connector compatibility with your vehicle’s wiring harness before installation. No wiring harness is included, so use the existing harness for connection. Follow the included instruction sheet for detailed installation guidance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10287 Engine Coolant Temperature Sensor to meet OEM specifications for fit and function. Each sensor undergoes rigorous testing to ensure durability and accurate performance under various operating conditions. While specific warranty details may vary, Delphi typically offers a limited warranty covering defects in materials and workmanship to provide confidence in your purchase.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205512373,"sku":"BBMX-TS10287","price":19.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10287_Fro.jpg?v=1774725758"},{"product_id":"delphi-ts10288-engine-coolant-temperature-sensor","title":"Delphi TS10288 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10288\u003c\/h2\u003e\u003cp\u003eThe Delphi Engine Coolant Temperature Sensor TS10288 is designed for precise temperature monitoring in various Acura and Honda models. This sensor ensures accurate engine temperature readings, contributing to optimal engine performance and efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Square\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 2\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10288 Engine Coolant Temperature Sensor features a threaded nut mounting type for secure installation and reliable connection. It includes a single square-shaped female connector with two male pin terminals, designed to interface seamlessly with the vehicle’s wiring system. This sensor is engineered to provide accurate temperature data to the engine control unit, helping maintain proper engine operation and prevent overheating.\u003c\/p\u003e\u003cp\u003eCompatible with a wide range of Acura and Honda vehicles, including the Accord, Civic, MDX, Pilot, and more, this sensor supports models such as the Accord Crosstour, Element, Fit, HR-V, ILX, NSX, Odyssey, Passport, RDX, Ridgeline, RL, RLX, TL, TLX, TSX, and ZDX. The TS10288 part number ensures you receive the correct sensor for your specific vehicle application.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature readings\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings or engine warning lights\u003c\/li\u003e\n\u003cli\u003eImproves engine performance by enabling proper fuel mixture adjustments\u003c\/li\u003e\n\u003cli\u003eAddresses issues related to poor fuel economy caused by faulty temperature data\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and emission control systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before removing the old sensor to avoid burns\u003c\/li\u003e\n\u003cli\u003eUse the threaded nut mounting type to securely fasten the sensor in place\u003c\/li\u003e\n\u003cli\u003eVerify connector compatibility: single female square connector with two male pin terminals\u003c\/li\u003e\n\u003cli\u003eCheck for any coolant leaks after installation\u003c\/li\u003e\n\u003cli\u003eFollow the included instruction sheet for detailed installation guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10288 Engine Coolant Temperature Sensor to meet OEM specifications, ensuring reliable performance and durability. While specific warranty details may vary, Delphi products typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or supplier for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205610677,"sku":"BBMX-TS10288","price":39.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10288_Fro.jpg?v=1774725759"},{"product_id":"delphi-ts10289-engine-coolant-temperature-sensor","title":"Delphi TS10289 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Lexus, Toyota, Mazda, and Scion\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10289 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for efficient engine management. Compatible with a wide range of Lexus, Toyota, Mazda, and Scion models, this sensor ensures proper engine performance and helps prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Square female connector for precise fit\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two male terminals for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for stable and secure mounting\u003c\/li\u003e\n\u003cli\u003ePackage Includes: Engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring Harness: Not included, compatible with existing vehicle harness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10289 sensor features a blade terminal type with two male terminals housed in a square-shaped female connector, ensuring a secure and accurate electrical connection. Its threaded nut mounting type allows for easy installation and a firm fit in the engine cooling system. This sensor is engineered to meet OEM specifications and is compatible with numerous Lexus, Toyota, Mazda, and Scion vehicles, including popular models such as the Toyota Camry, 4Runner, Corolla, Highlander, Tacoma, Lexus RX350, ES350, GS350, and Mazda CX-5, CX-3, and CX-9.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMonitors engine coolant temperature to optimize engine control unit (ECU) performance\u003c\/li\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eResolves issues related to inaccurate temperature readings or sensor failure\u003c\/li\u003e\n\u003cli\u003eImproves fuel efficiency by enabling proper engine temperature regulation\u003c\/li\u003e\n\u003cli\u003ePrevents engine stalling or rough idling caused by faulty temperature sensors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10289 sensor requires removal of the old sensor and replacement with the new unit using the threaded nut mounting. Ensure the electrical connector matches the square female connector with two male blade terminals. No wiring harness is included, so use the existing vehicle harness. Follow the included instruction sheet for torque specifications and proper installation procedures to avoid leaks or sensor damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10289 Engine Coolant Temperature Sensor to meet strict quality standards, ensuring reliable performance and durability. While specific warranty details may vary, Delphi typically offers a limited warranty covering defects in materials and workmanship. Refer to the product documentation or Delphi’s official resources for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205643445,"sku":"BBMX-TS10289","price":29.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10289_Fro.jpg?v=1774890726"},{"product_id":"delphi-ts10294-engine-coolant-temperature-sensor","title":"Delphi TS10294 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Ford, Lincoln, and Mercury\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10294 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for a variety of Ford, Lincoln, and Mercury vehicles. This sensor helps maintain optimal engine performance by monitoring coolant temperature and ensuring proper engine management.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for straightforward installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Square connector design\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals for reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for secure and precise mounting\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of Delphi TS10294 Sensor\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10294 Engine Coolant Temperature Sensor features a threaded nut mounting type, ensuring a firm and accurate fit in the engine cooling system. Its blade terminal type and two-terminal configuration provide a dependable electrical connection, while the female square connector simplifies wiring integration. This sensor is engineered to deliver consistent temperature data to the engine control unit, which is critical for regulating fuel injection and ignition timing in vehicles such as the Ford F-150, Lincoln Navigator, and Mercury Mountaineer.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis sensor is compatible with a wide range of Ford, Lincoln, and Mercury models, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord Explorer, Mustang, Ranger, Taurus, and F-250 Super Duty\u003c\/li\u003e\n\u003cli\u003eLincoln Continental, Mark VIII, and Town Car\u003c\/li\u003e\n\u003cli\u003eMercury Cougar, Grand Marquis, and Sable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is suitable for use in engine cooling systems where precise temperature monitoring is essential for engine efficiency and emission control.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the TS10294 Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErratic or inaccurate engine temperature readings\u003c\/li\u003e\n\u003cli\u003eEngine overheating due to faulty temperature feedback\u003c\/li\u003e\n\u003cli\u003ePoor fuel economy caused by incorrect coolant temperature data\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by sensor malfunction\u003c\/li\u003e\n\u003cli\u003eEngine performance issues related to improper temperature regulation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before removing the old sensor to avoid burns\u003c\/li\u003e\n\u003cli\u003eUse the included instruction sheet for proper installation procedures\u003c\/li\u003e\n\u003cli\u003eVerify the threaded nut is tightened securely to prevent coolant leaks\u003c\/li\u003e\n\u003cli\u003eCheck connector compatibility with the vehicle’s wiring harness (female square connector)\u003c\/li\u003e\n\u003cli\u003eDo not include wiring harness; use existing vehicle harness for connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10294 sensor to meet OEM specifications, ensuring reliable performance and durability. The product includes an instruction sheet to assist with installation. While specific warranty details may vary, Delphi parts typically come with a limited warranty covering defects in materials and workmanship.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205676213,"sku":"BBMX-TS10294","price":18.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10294_Fro_fd12667d-ed58-445f-8659-9c7545680592.jpg?v=1774725759"},{"product_id":"delphi-ts10295-engine-coolant-temperature-sensor","title":"Delphi TS10295 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10295\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10295 Engine Coolant Temperature Sensor is designed for precise temperature monitoring in select Dodge, Jeep, and Plymouth vehicles. This sensor features a threaded nut mounting type and a reliable blade terminal connection, ensuring accurate engine temperature readings for optimal performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Rectangle\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 2\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Engine coolant temperature sensor, instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10295 Engine Coolant Temperature Sensor is engineered to provide accurate temperature data to the engine control unit (ECU) in various Dodge, Jeep, and Plymouth models, including the Ram 1500, Grand Cherokee, Dakota, and Grand Caravan. Featuring a single rectangular female connector with two male blade terminals, this sensor ensures secure electrical connections. The threaded nut mounting type allows for straightforward installation and a stable fit within the engine cooling system. Note that this sensor does not include a wiring harness, so compatibility with existing vehicle wiring should be confirmed prior to installation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis sensor is compatible with a range of Dodge, Jeep, and Plymouth vehicles, including but not limited to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDodge Ram 1500, 2500, 3500 and their Van variants\u003c\/li\u003e\n\u003cli\u003eJeep Grand Cherokee, Grand Wagoneer, Durango\u003c\/li\u003e\n\u003cli\u003ePlymouth Grand Caravan, Grand Voyager\u003c\/li\u003e\n\u003cli\u003eDodge Dakota, B150, B250, B350, B1500, B2500, B3500\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the TS10295 Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInaccurate engine temperature readings causing poor fuel efficiency\u003c\/li\u003e\n\u003cli\u003eEngine overheating due to faulty temperature monitoring\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by sensor failure\u003c\/li\u003e\n\u003cli\u003eErratic engine performance related to temperature sensor malfunction\u003c\/li\u003e\n\u003cli\u003eCooling fan operation issues linked to temperature sensor data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10295 sensor requires removal of the old sensor and replacement with the new unit using the threaded nut mounting. Ensure the engine is cool before beginning installation to avoid injury. Verify the connector shape and terminal type match the vehicle’s wiring harness to ensure proper fitment. Follow the included instruction sheet for torque specifications and wiring connection guidance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10295 Engine Coolant Temperature Sensor to meet OEM standards for durability and performance. Each sensor undergoes rigorous testing to ensure reliable operation under various engine conditions. Warranty coverage details should be confirmed with the point of purchase or Delphi directly.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205708981,"sku":"BBMX-TS10295","price":29.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10295_Fro_53108811-ab87-458d-9d04-657cd149745b.jpg?v=1774725759"},{"product_id":"delphi-ts10296-engine-coolant-temperature-sensor","title":"Delphi TS10296 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Acura and Honda Vehicles\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10296 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's engine cooling system. Compatible with a range of Acura and Honda models, this sensor ensures optimal engine performance and helps prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Square\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 2\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10296 sensor features a single square-shaped female connector with two male pin terminals, designed for secure and reliable electrical connections. Its threaded nut mounting type allows for straightforward installation and a stable fit within the engine bay. This sensor is compatible with various Acura and Honda models, including the Accord, Civic, CR-V, Element, Fit, MDX, Odyssey, Pilot, Ridgeline, RL, RSX, S2000, TL, and TSX. The wiring harness is not included, so ensure your vehicle’s existing harness is compatible.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps monitor engine coolant temperature to prevent overheating\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate temperature gauge readings\u003c\/li\u003e\n\u003cli\u003ePrevents engine performance issues related to faulty temperature data\u003c\/li\u003e\n\u003cli\u003eSupports proper engine control unit (ECU) operation\u003c\/li\u003e\n\u003cli\u003eAddresses check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10296 sensor requires removal of the old sensor and threading the new sensor into place using the threaded nut mounting. Ensure the connector is securely attached to avoid electrical issues. Since the wiring harness is not included, verify compatibility with your vehicle’s existing harness before installation. Follow the included instruction sheet for detailed guidance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10296 Engine Coolant Temperature Sensor to meet OEM specifications, ensuring reliable performance and durability. This sensor undergoes rigorous testing to maintain quality standards. Please refer to Delphi’s warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205807285,"sku":"BBMX-TS10296","price":36.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10296_Fro.jpg?v=1774725759"},{"product_id":"delphi-ts10326-engine-coolant-temperature-sensor","title":"Delphi TS10326 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Hyundai, Kia, and Genesis\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10326 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's engine cooling system. Compatible with a wide range of Hyundai, Kia, and Genesis models, this sensor ensures optimal engine performance and helps prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle female rectangular connector with three male terminals\u003c\/li\u003e\n\u003cli\u003eThreaded nut mounting type for easy installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10326 sensor features a blade terminal type with a single female rectangular connector housing three male terminals, ensuring a reliable electrical interface. Its threaded nut mounting type allows for straightforward installation and secure fitment. This sensor is compatible with various Hyundai, Kia, and Genesis vehicles, including popular models such as the Hyundai Elantra, Sonata, Tucson, and Veloster; Kia Forte, Optima, Sorento, and Sportage; as well as Genesis G70, G80, and G90. The sensor accurately monitors engine coolant temperature to help maintain proper engine operation and efficiency.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to faulty coolant temperature sensing\u003c\/li\u003e\n\u003cli\u003ePrevents poor fuel economy caused by incorrect temperature input\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10326 sensor requires removal of the old sensor and replacement with the new unit using the threaded nut mounting. Ensure the connector is properly aligned and securely attached to avoid electrical issues. Since the wiring harness is not included, verify compatibility with your vehicle’s existing harness before installation. Follow the included instruction sheet for detailed guidance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi is a recognized brand in automotive components, known for manufacturing reliable and durable sensors. The TS10326 Engine Coolant Temperature Sensor undergoes strict quality control to meet OEM standards. Please refer to Delphi’s warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389205840053,"sku":"BBMX-TS10326","price":21.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10326_Fro_f5be72c5-a3b9-4445-9f36-7947c6ccb722.jpg?v=1774725760"},{"product_id":"delphi-ts10327-engine-coolant-temperature-sensor","title":"Delphi TS10327 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10327\u003c\/h2\u003e\u003cp\u003eThe Delphi Engine Coolant Temperature Sensor TS10327 is designed to provide accurate temperature readings for engine management systems. Compatible with various Chrysler, Dodge, Hyundai, and Mitsubishi models, this sensor ensures reliable performance in monitoring engine coolant temperature.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Rectangle-shaped female connector\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two male terminals for precise signal transmission\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for stable and easy mounting\u003c\/li\u003e\n\u003cli\u003eWiring Harness: Not included, allowing for flexible integration\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10327 engine coolant temperature sensor features a blade terminal type with two male terminals housed in a female rectangular connector. This design supports a secure and reliable electrical connection, essential for accurate temperature data transmission to the vehicle’s engine control unit (ECU). The sensor mounts using a threaded nut, providing a firm and vibration-resistant fit. While the wiring harness is not included, the sensor is compatible with existing harnesses in vehicles such as the Chrysler 3000GT, Dodge Stratus, Hyundai Sonata, and Mitsubishi Lancer. The package includes an instruction sheet to assist with proper installation and setup.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis engine coolant temperature sensor TS10327 is compatible with a range of vehicles, including Chrysler 3000GT and Sebring, Dodge Stratus and Stealth, Hyundai Sonata and Endeavor, as well as Mitsubishi Lancer, Eclipse, and Montero Sport. It is designed to work with the original equipment wiring and mounting points, ensuring a direct fit replacement for these models.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by the Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncorrect engine temperature readings causing poor fuel efficiency\u003c\/li\u003e\n\u003cli\u003eEngine overheating due to faulty temperature monitoring\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by sensor failure\u003c\/li\u003e\n\u003cli\u003eErratic engine performance related to coolant temperature sensor faults\u003c\/li\u003e\n\u003cli\u003eCooling fan operation issues linked to inaccurate temperature data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before removing the old sensor to avoid burns\u003c\/li\u003e\n\u003cli\u003eUse the included instruction sheet for proper torque specifications on the threaded nut mount\u003c\/li\u003e\n\u003cli\u003eVerify connector compatibility with the vehicle’s wiring harness before installation\u003c\/li\u003e\n\u003cli\u003eInspect wiring and connectors for damage or corrosion prior to sensor installation\u003c\/li\u003e\n\u003cli\u003eTest sensor operation after installation to confirm accurate temperature readings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10327 sensor to meet or exceed OEM specifications, ensuring reliable performance and durability. The product undergoes rigorous quality control testing. Warranty coverage details should be confirmed at the point of purchase, as they may vary by distributor.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389206200501,"sku":"BBMX-TS10327","price":23.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10327_Fro.jpg?v=1774725760"},{"product_id":"delphi-ts10329-engine-coolant-temperature-sensor","title":"Delphi TS10329 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Ford, Lincoln, and Mercury\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10329 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's engine cooling system. Compatible with various Ford, Lincoln, and Mercury models, this sensor ensures optimal engine performance and helps prevent overheating.\u003c\/p\u003e\u003ch2\u003eKey Features of Delphi TS10329 Engine Coolant Temperature Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Rectangle design for precise fit\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals to support accurate signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector compatible with male terminals\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals for reliable contact\u003c\/li\u003e\n\u003cli\u003eMounting Type: Push-on installation for ease of replacement\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring Harness: Not included, compatible with existing vehicle harness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description of the Delphi TS10329 Sensor\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10329 Engine Coolant Temperature Sensor is engineered to monitor the temperature of the engine coolant accurately. Featuring a blade terminal type and a single rectangular female connector, this sensor is designed for compatibility with specific Ford, Lincoln, and Mercury vehicles such as the Ford Explorer, Mustang, Fusion, and Lincoln MKZ. The push-on mounting type allows for straightforward installation without the need for additional hardware. With two male terminals, the sensor ensures reliable electrical connectivity, supporting the vehicle’s engine control unit in maintaining optimal engine temperature.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFord C-Max, Explorer, Explorer Sport, Explorer Sport Trac, Five Hundred, Focus, Freestyle, Fusion, Mustang, Ranger, SSV Plug-In Hybrid\u003c\/li\u003e\n\u003cli\u003eLincoln MKZ, Montego, Mountaineer\u003c\/li\u003e\n\u003cli\u003eMercury Mountaineer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Issues Addressed by the TS10329 Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngine overheating due to inaccurate coolant temperature readings\u003c\/li\u003e\n\u003cli\u003ePoor engine performance caused by faulty temperature data\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by sensor failure\u003c\/li\u003e\n\u003cli\u003eErratic temperature gauge behavior\u003c\/li\u003e\n\u003cli\u003eIncreased fuel consumption related to incorrect engine temperature input\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10329 sensor requires no wiring harness as it connects directly to the existing vehicle harness. The push-on mounting type simplifies replacement, but ensure the engine is cool before removal to avoid injury. Verify the connector shape and terminal type match your vehicle’s specifications. Follow the included instruction sheet carefully to ensure proper installation and sensor function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10329 sensor to meet OEM standards for durability and performance. While specific warranty details may vary, Delphi products typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation or contact the vehicle manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389208592565,"sku":"BBMX-TS10329","price":21.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10329_Fro.jpg?v=1774725760"},{"product_id":"delphi-ts10330-engine-coolant-temperature-sensor","title":"Delphi TS10330 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Chrysler and Dodge Vehicles\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10330 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for optimal engine performance. Compatible with a range of Chrysler, Dodge, Jeep, Ram, Fiat, and Mitsubishi models, this sensor ensures your vehicle's cooling system operates efficiently.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle female rectangular connector with two male terminals\u003c\/li\u003e\n\u003cli\u003eThreaded nut mounting for easy and stable installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included, compatible with existing vehicle harness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10330 sensor features a blade terminal type with a single female rectangular connector housing two male terminals, ensuring a reliable electrical interface. Its threaded nut mounting type allows for straightforward installation and secure fitment in the engine cooling system. This sensor is compatible with various models including Chrysler 200, 300, Dodge Challenger, Charger, Ram 1500, 2500, 3500, Jeep Wrangler, Cherokee, Grand Cherokee, and Fiat 500X among others. The sensor is engineered to provide precise coolant temperature data to the engine control unit, helping maintain optimal engine temperature and performance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by monitoring coolant temperature\u003c\/li\u003e\n\u003cli\u003eAssists in regulating engine fuel mixture and ignition timing\u003c\/li\u003e\n\u003cli\u003eResolves inaccurate temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eAddresses engine stalling or rough idling caused by faulty temperature data\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and emission controls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eBefore installation, ensure the engine is cool to avoid injury. The Delphi TS10330 sensor installs via a threaded nut mount, requiring a compatible socket or wrench. Confirm the connector shape and terminal type match your vehicle’s wiring harness. Since the wiring harness is not included, use the existing harness for connection. Follow the included instruction sheet for torque specifications and wiring guidance to ensure proper sensor function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10330 Engine Coolant Temperature Sensor to meet OEM standards for fit, form, and function. Each sensor undergoes rigorous testing to ensure durability and accuracy. While specific warranty details may vary, Delphi typically offers a limited warranty covering defects in materials and workmanship, providing confidence in the sensor’s reliability for Chrysler, Dodge, Jeep, Ram, Fiat, and Mitsubishi vehicles.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389208658101,"sku":"BBMX-TS10330","price":29.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10330_Ang.jpg?v=1774890726"},{"product_id":"delphi-ts10338-engine-coolant-temperature-sensor","title":"Delphi TS10338 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Delphi Engine Coolant Temperature Sensor TS10338\u003c\/h2\u003e\u003cp\u003eThe Delphi Engine Coolant Temperature Sensor TS10338 is designed to provide accurate temperature readings for engine management systems. Compatible with select Ford, Lincoln, and Mercury models, this sensor ensures reliable performance in monitoring engine coolant temperature.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Rectangle\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 2\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eWiring Harness Included: No\u003c\/li\u003e\n\u003cli\u003eMounting Type: Push on\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Engine coolant temperature sensor, instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10338 engine coolant temperature sensor features a push-on mounting type for straightforward installation. It includes a single rectangular female connector with two male pin terminals, designed to interface seamlessly with the vehicle’s wiring harness (not included). This sensor is engineered to deliver precise temperature data to the engine control unit, helping maintain optimal engine performance and fuel efficiency.\u003c\/p\u003e\u003cp\u003eCompatible with Ford Escape, Fusion, Mariner, Lincoln Milan, Mercury Sable, Taurus, and Zephyr models, the TS10338 sensor meets OEM specifications for fit and function. Its robust design supports consistent operation under varying engine conditions.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature readings\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings or dashboard warning lights\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to incorrect temperature data\u003c\/li\u003e\n\u003cli\u003eSupports proper fuel mixture adjustments by the engine control unit\u003c\/li\u003e\n\u003cli\u003eEliminates potential drivability problems caused by faulty temperature sensors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the ignition is off before installation to avoid electrical shorts\u003c\/li\u003e\n\u003cli\u003eVerify connector orientation matches the rectangular female connector with two male pins\u003c\/li\u003e\n\u003cli\u003ePush the sensor firmly into place using the push-on mounting type\u003c\/li\u003e\n\u003cli\u003eCheck for secure connection to prevent signal loss or intermittent readings\u003c\/li\u003e\n\u003cli\u003eRefer to the included instruction sheet for vehicle-specific installation guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10338 sensor to meet strict quality standards, ensuring durability and reliable performance. While specific warranty details may vary, Delphi typically offers coverage against manufacturing defects. This sensor is engineered to meet or exceed OEM requirements for the listed Ford, Lincoln, and Mercury models.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389208985781,"sku":"BBMX-TS10338","price":57.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10338_Ang.jpg?v=1774725761"},{"product_id":"delphi-ts10468-engine-coolant-temperature-sensor","title":"Delphi TS10468 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Buick and Chevrolet\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10468 engine coolant temperature sensor is designed to provide accurate temperature readings for your vehicle's cooling system. Compatible with select Buick and Chevrolet models, this sensor ensures your engine operates within optimal temperature ranges.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Oval\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 2\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Push on\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10468 sensor features a push-on mounting type for straightforward installation. It includes a single oval-shaped female connector with two male pin terminals, designed to interface seamlessly with your vehicle's wiring harness (harness not included). This sensor is engineered to fit specific Buick and Chevrolet models, including the Cruze, Cruze Limited, Encore, Sonic, and Trax. Its precise design helps maintain accurate engine temperature monitoring, which is critical for engine performance and longevity.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to faulty temperature sensors\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of the vehicle’s cooling fan and fuel injection system\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10468 sensor requires no wiring harness as it connects directly via the push-on mounting and oval female connector. Ensure the engine is cool before removal to avoid injury. Disconnect the battery before installation to prevent electrical shorts. Follow the included instruction sheet carefully for proper sensor placement and secure connection. Verify sensor operation after installation by monitoring engine temperature readings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10468 engine coolant temperature sensor to meet OEM specifications, ensuring reliable performance and durability. While specific warranty details may vary, Delphi products typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389209772213,"sku":"BBMX-TS10468","price":37.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10468_Fro.jpg?v=1774725761"},{"product_id":"delphi-ts10544-engine-coolant-temperature-sensor","title":"Delphi TS10544 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for BMW and Mini Models\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10544 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's cooling system. Compatible with a wide range of BMW and Mini models, this sensor ensures optimal engine performance and helps prevent overheating issues.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for streamlined installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Rectangle design for precise fitment\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals to support accurate signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector compatible with male terminals\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals for reliable contact\u003c\/li\u003e\n\u003cli\u003eMounting Type: Push-on installation for ease of replacement\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10544 sensor features a blade terminal type with two male terminals housed within a female rectangular connector. This design supports a secure and stable electrical connection, essential for accurate temperature monitoring. The push-on mounting type allows for straightforward installation without the need for additional hardware. This sensor is compatible with numerous BMW models including the 128i, 323i, 325i, 328i, 330i, 525i, 530i, 540i, 550i, 645Ci, 650i, 740i, 745i, 750i, 760i, M3, M5, M6, X1, X5, X6, Z4, and Z8, as well as Mini models such as Cooper, Cooper Clubman, and Cooper Countryman.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings in BMW 3 Series and 5 Series vehicles\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to faulty temperature sensor signals\u003c\/li\u003e\n\u003cli\u003eSupports proper engine management system operation in Mini Cooper models\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers caused by coolant temperature sensor faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10544 sensor is straightforward due to its push-on mounting type and blade terminal design. Ensure the engine is cool before beginning replacement to avoid injury. Disconnect the battery to prevent electrical shorts. Carefully remove the old sensor by disconnecting the female rectangular connector and pulling the sensor from its mounting point. Install the new sensor by pushing it firmly into place and reconnecting the electrical connector. Verify secure connections and test the sensor function by starting the engine and monitoring temperature readings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi is a recognized brand in automotive components, known for manufacturing reliable and durable parts. The TS10544 Engine Coolant Temperature Sensor undergoes rigorous quality control to meet OEM standards. While specific warranty details may vary, Delphi typically offers coverage against manufacturing defects to ensure customer confidence in product performance.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389210525877,"sku":"BBMX-TS10544","price":30.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10544_Fro_386e87e4-375c-44fd-90a0-8c8240a38ece.jpg?v=1774725764"},{"product_id":"delphi-ts10545-engine-coolant-temperature-sensor","title":"Delphi TS10545 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Dodge and Plymouth Neon\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10545 engine coolant temperature sensor is designed to provide accurate temperature readings for your Dodge or Plymouth Neon. This sensor ensures your engine management system receives precise data to maintain optimal engine performance and prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Pin\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: 1\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Round\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: 3\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring Harness: Not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10545 sensor features a threaded nut mounting type for secure installation in the engine cooling system. It includes a single round female connector with three male pin terminals, designed to interface seamlessly with the vehicle’s wiring harness (harness not included). This sensor is specifically compatible with Dodge and Plymouth Neon models, providing a direct fit replacement that meets OEM specifications.\u003c\/p\u003e\u003ch2\u003ePurpose and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMonitors engine coolant temperature to prevent overheating\u003c\/li\u003e\n\u003cli\u003eHelps regulate engine cooling fan operation\u003c\/li\u003e\n\u003cli\u003eSupports accurate engine temperature data for fuel injection and ignition timing\u003c\/li\u003e\n\u003cli\u003ePrevents engine performance issues related to faulty temperature readings\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine damage due to overheating or incorrect temperature signals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation requires removing the old sensor and threading the Delphi TS10545 sensor into the designated port on the engine block or cylinder head. Ensure the sensor is tightened securely using the threaded nut mounting. Connect the sensor’s female round connector to the vehicle’s wiring harness, verifying the three male pin terminals align correctly. No wiring harness is included, so use the existing vehicle harness for connection. Follow the included instruction sheet for detailed installation guidance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10545 engine coolant temperature sensor to meet strict quality standards, ensuring reliable performance and durability. This sensor is engineered to match OEM specifications for fit and function. While specific warranty details are not provided here, Delphi products typically come with a limited warranty covering defects in materials and workmanship. Refer to Delphi’s official documentation for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389210591413,"sku":"BBMX-TS10545","price":28.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10545_Fro.jpg?v=1774725765"},{"product_id":"delphi-ts10546-engine-coolant-temperature-sensor","title":"Delphi TS10546 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Chrysler, Dodge, Jeep\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10546 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your vehicle's cooling system. Compatible with various Chrysler, Dodge, and Jeep models, this sensor ensures your engine operates within optimal temperature ranges.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle female rectangular connector with two male terminals\u003c\/li\u003e\n\u003cli\u003ePush-on mounting type for straightforward installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eWiring harness not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Delphi engine coolant temperature sensor features a blade terminal type and a single rectangular female connector housing two male terminals, ensuring a reliable electrical interface. The push-on mounting design allows for easy replacement without additional hardware. The sensor is compatible with 2007-2010 Chrysler Avenger, Dodge Caliber, Jeep Cherokee, Compass, Journey, Patriot, Sebring, and Wrangler models, making it a suitable choice for maintaining proper engine temperature monitoring in these vehicles.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to faulty coolant temperature sensing\u003c\/li\u003e\n\u003cli\u003ePrevents improper fuel mixture caused by incorrect temperature input\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10546 sensor is straightforward due to its push-on mounting type. Ensure the engine is cool before removal to avoid burns. Disconnect the battery before installation to prevent electrical shorts. Verify the connector shape and terminal type match your vehicle’s wiring harness. Follow the included instruction sheet for proper installation steps and torque specifications.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi is a recognized brand in automotive components, known for meeting OEM standards. The TS10546 sensor undergoes rigorous testing to ensure durability and accurate performance. While specific warranty details may vary, Delphi typically offers a limited warranty covering defects in materials and workmanship. Refer to the product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389210624181,"sku":"BBMX-TS10546","price":18.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10546_Fro_8e70e264-8eca-4fd6-b154-0077bf78b6b9.jpg?v=1774725765"},{"product_id":"delphi-ts10547-engine-coolant-temperature-sensor","title":"Delphi TS10547 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Toyota Vehicles\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10547 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your Toyota Avalon, Camry, Corolla, Sequoia, Solara, and Tundra models. This sensor ensures your engine management system receives precise data to maintain optimal engine performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade terminals for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eConnector Quantity: Single connector for straightforward installation\u003c\/li\u003e\n\u003cli\u003eConnector Shape: Rectangle design for compatibility with factory wiring harnesses\u003c\/li\u003e\n\u003cli\u003eTerminal Quantity: Two terminals to support reliable signal transmission\u003c\/li\u003e\n\u003cli\u003eConnector Gender: Female connector to match vehicle wiring\u003c\/li\u003e\n\u003cli\u003eTerminal Gender: Male terminals for proper mating\u003c\/li\u003e\n\u003cli\u003eMounting Type: Threaded nut for firm and stable sensor placement\u003c\/li\u003e\n\u003cli\u003ePackage Contents: Includes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10547 Engine Coolant Temperature Sensor is engineered to meet the specifications of various Toyota models including Avalon, Camry, Corolla, Sequoia, Solara, and Tundra. Featuring a threaded nut mounting type, this sensor installs securely into the engine block or cylinder head, providing accurate temperature readings essential for engine control units (ECUs). The sensor’s blade terminal type and female rectangular connector ensure compatibility with the vehicle’s existing wiring harness, although the wiring harness itself is not included. With two male terminals, the sensor delivers reliable electrical signals to help regulate fuel injection and ignition timing based on coolant temperature.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eSupports efficient fuel management and emission control\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eEliminates engine stalling or rough idling caused by faulty temperature input\u003c\/li\u003e\n\u003cli\u003eAssists in maintaining proper engine warm-up and cooling fan operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10547 sensor requires removal of the old sensor and threading the new sensor into the engine block or cylinder head. Ensure the mounting surface is clean and free of debris before installation. Use appropriate torque specifications to avoid damage to the sensor or engine components. Since the wiring harness is not included, verify connector compatibility with your vehicle’s existing harness. Refer to the included instruction sheet for detailed installation guidance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10547 Engine Coolant Temperature Sensor to meet OEM standards for fit, form, and function. This sensor undergoes rigorous testing to ensure durability and accurate performance under various operating conditions. While specific warranty details may vary, Delphi typically offers a limited warranty covering defects in materials and workmanship. Consult product documentation or your parts provider for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389210689717,"sku":"BBMX-TS10547","price":43.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10547_Fro.jpg?v=1774725765"},{"product_id":"delphi-ts10574-engine-coolant-temperature-sensor","title":"Delphi TS10574 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Ford EcoSport and Focus\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10574 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for your Ford EcoSport and Ford Focus models. This sensor ensures your engine management system receives precise data to maintain optimal engine performance and efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerminal Type: Blade for secure electrical connection\u003c\/li\u003e\n\u003cli\u003eSingle female rectangular connector with two male terminals\u003c\/li\u003e\n\u003cli\u003ePush-on mounting type for straightforward installation\u003c\/li\u003e\n\u003cli\u003eIncludes engine coolant temperature sensor and instruction sheet\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford EcoSport and Ford Focus vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details and Sensor Attributes\u003c\/h2\u003e\u003cp\u003eThe Delphi TS10574 features a blade terminal type that offers a reliable and corrosion-resistant connection. It has one female rectangular connector housing two male terminals, ensuring compatibility with the original wiring harness. The sensor mounts using a push-on method, simplifying replacement without the need for additional hardware. Note that the wiring harness is not included, so the existing harness must be used during installation.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Part Number Information\u003c\/h2\u003e\u003cp\u003eThis engine coolant temperature sensor is specifically compatible with Ford EcoSport and Ford Focus models, making it a suitable replacement part for these vehicles. The part number TS10574 should be referenced when searching for or ordering this sensor to ensure proper fitment and function.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eResolves issues with erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance problems related to incorrect temperature input\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of the vehicle’s cooling fan and fuel injection system\u003c\/li\u003e\n\u003cli\u003eEliminates check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Delphi TS10574 sensor requires disconnecting the battery and locating the existing coolant temperature sensor on the engine block or cylinder head. The push-on mounting type allows for easy removal and replacement without special tools. Ensure the connector is fully seated and terminals are clean to maintain a secure electrical connection. Verify sensor operation after installation by monitoring engine temperature readings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDelphi manufactures the TS10574 sensor to meet OEM specifications, ensuring reliable performance and durability. While specific warranty details may vary, Delphi products typically come with a limited warranty covering defects in materials and workmanship. Refer to the product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":43389210886325,"sku":"BBMX-TS10574","price":27.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DE_TS10574_Fro.jpg?v=1774725766"},{"product_id":"walker-211-1002-engine-coolant-temperature-sensor","title":"Walker 211-1002 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Walker Engine Coolant Temperature Sensor 211-1002\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor 211-1002 is designed for precise temperature monitoring in various Ford, Lincoln, and Mercury vehicles. This sensor helps maintain optimal engine performance by providing accurate coolant temperature data to the vehicle’s engine control unit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford, Lincoln, and Mercury models including F-150, Explorer, Mustang, and Crown Victoria\u003c\/li\u003e\n\u003cli\u003ePart number 211-1002 ensures exact fit and function\u003c\/li\u003e\n\u003cli\u003eEngine coolant temperature sensor type for reliable temperature readings\u003c\/li\u003e\n\u003cli\u003eManufactured by Walker Products, known for quality automotive components\u003c\/li\u003e\n\u003cli\u003eSupports engine management systems by delivering accurate temperature data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details and Brand Line Information\u003c\/h2\u003e\u003cp\u003eThe 211-1002 sensor is part of the Walker Products line, which focuses on delivering dependable engine management components. Walker Products specializes in sensors and related parts that meet OEM specifications, ensuring compatibility and durability. This engine coolant temperature sensor is engineered to provide consistent performance across a wide range of Ford, Lincoln, and Mercury vehicles, including models such as the Ford Bronco, Lincoln Mark VIII, and Mercury Sable.\u003c\/p\u003e\u003ch2\u003eFunction and Application of the Engine Coolant Temperature Sensor\u003c\/h2\u003e\u003cp\u003eThis sensor monitors the temperature of the engine coolant and sends this information to the vehicle’s engine control module (ECM). Accurate temperature readings are critical for regulating fuel injection, ignition timing, and emission controls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by monitoring coolant temperature\u003c\/li\u003e\n\u003cli\u003eSupports efficient fuel management and engine performance\u003c\/li\u003e\n\u003cli\u003eAssists in reducing emissions by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eDetects temperature fluctuations that could indicate cooling system issues\u003c\/li\u003e\n\u003cli\u003eEnables proper operation of the vehicle’s temperature gauge\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Walker 211-1002 sensor, ensure the engine is cool to avoid injury. Locate the existing coolant temperature sensor on the engine block or cylinder head, depending on the vehicle model. Remove the old sensor carefully and install the new sensor, making sure to tighten it to the manufacturer’s torque specifications. Verify electrical connections are secure to ensure accurate sensor readings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for the 211-1002 sensor, ensuring it meets or exceeds OEM requirements. This part is manufactured to provide reliable performance and durability under normal operating conditions. Warranty coverage details should be confirmed with the product documentation or supplier.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513425068213,"sku":"DKHD-211-1002","price":19.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111002_Fro.jpg?v=1774736956"},{"product_id":"walker-211-1004-engine-coolant-temperature-sensor","title":"Walker 211-1004 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Walker Engine Coolant Temperature Sensor 211-1004\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor 211-1004 is designed for precise temperature monitoring in select Nissan and INFINITI vehicles. This sensor helps maintain optimal engine performance by providing accurate coolant temperature readings to the engine control unit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan 200SX, 300ZX, D21, M30, Maxima, Pathfinder\u003c\/li\u003e\n\u003cli\u003eEngine Coolant Temperature Sensor part type for reliable temperature measurement\u003c\/li\u003e\n\u003cli\u003eWalker Products brand line ensures consistent quality and fitment\u003c\/li\u003e\n\u003cli\u003ePart number 211-1004 for easy identification and replacement\u003c\/li\u003e\n\u003cli\u003eGTIN 00724620073441 for inventory and tracking purposes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout Walker Products Brand Line\u003c\/h2\u003e\u003cp\u003eWalker Products offers a range of automotive components focused on engine management and emissions control. The Engine Coolant Temperature Sensor 211-1004 is part of this line, providing dependable sensor solutions that meet OEM specifications for Nissan and INFINITI vehicles. This ensures compatibility and performance consistency across the supported models.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Walker 211-1004 Engine Coolant Temperature Sensor is engineered to deliver accurate temperature data to the vehicle’s engine control module. This data is critical for regulating fuel injection, ignition timing, and emission controls. Designed specifically for Nissan and INFINITI models such as the 200SX, 300ZX, D21, M30, Maxima, and Pathfinder, this sensor supports proper engine operation and helps prevent overheating or inefficient fuel use.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by monitoring coolant temperature\u003c\/li\u003e\n\u003cli\u003eSupports efficient fuel management and engine timing adjustments\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings or sensor failure\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to inaccurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003ePrevents check engine light triggers related to temperature sensor faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Walker 211-1004 sensor, ensure the engine is cool to avoid burns or damage. Disconnect the battery before removal to prevent electrical shorts. Use appropriate tools to remove the old sensor and apply thread sealant if recommended by the vehicle manufacturer. Verify proper electrical connections and test sensor operation after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for the 211-1004 Engine Coolant Temperature Sensor. Each unit is tested to meet OEM specifications for fit and function. While specific warranty details may vary, Walker typically offers coverage against manufacturing defects to ensure reliability and customer confidence.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513425133749,"sku":"DKHD-211-1004","price":24.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111004_Fro.jpg?v=1774736956"},{"product_id":"walker-211-1005-engine-coolant-temperature-sensor","title":"Walker 211-1005 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Walker Engine Coolant Temperature Sensor\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor 211-1005 is designed for precise temperature monitoring in select Nissan vehicles. This sensor helps maintain optimal engine performance by providing accurate coolant temperature readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan 200SX, 280ZX, 810, and Maxima models\u003c\/li\u003e\n\u003cli\u003ePart number 211-1005 ensures exact fit and function\u003c\/li\u003e\n\u003cli\u003eEngine coolant temperature sensor type for reliable temperature measurement\u003c\/li\u003e\n\u003cli\u003eManufactured by Walker, a trusted name in automotive sensors\u003c\/li\u003e\n\u003cli\u003eSupports engine management systems by delivering accurate temperature data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout Walker Products Brand Line\u003c\/h2\u003e\u003cp\u003eWalker Products specializes in automotive sensors and emission control components. Their product line includes engine coolant temperature sensors like the 211-1005, engineered to meet OEM specifications for Nissan vehicles. This ensures compatibility and dependable operation within the vehicle’s cooling and engine management systems.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Walker 211-1005 Engine Coolant Temperature Sensor is engineered to monitor the temperature of the engine coolant accurately. It sends temperature data to the vehicle’s engine control unit (ECU), which adjusts fuel injection and ignition timing accordingly. This sensor is specifically compatible with Nissan 200SX, 280ZX, 810, and Maxima models, providing a direct replacement that maintains factory performance standards.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents engine overheating by providing accurate coolant temperature readings\u003c\/li\u003e\n\u003cli\u003eHelps resolve erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to incorrect temperature data\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and emission controls\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine damage due to faulty temperature sensing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before sensor removal to avoid burns\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damaging the sensor or mounting threads\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Nissan 200SX, 280ZX, 810, or Maxima before installation\u003c\/li\u003e\n\u003cli\u003eCheck for coolant leaks after installation and tighten sensor to manufacturer torque specifications\u003c\/li\u003e\n\u003cli\u003eReset the vehicle’s ECU if necessary to clear any related error codes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for the 211-1005 Engine Coolant Temperature Sensor. Each sensor undergoes testing to ensure accurate temperature readings and durability under normal operating conditions. Warranty coverage details should be confirmed with the product documentation or supplier.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513425232053,"sku":"DKHD-211-1005","price":44.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111005_Fro.jpg?v=1774736957"},{"product_id":"walker-211-1006-engine-coolant-temperature-sensor","title":"Walker 211-1006 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Walker Engine Coolant Temperature Sensor 211-1006\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor 211-1006 is designed specifically for Honda Prelude models. This sensor plays a critical role in monitoring the engine's coolant temperature to ensure optimal performance and prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Prelude vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 211-1006 for precise identification\u003c\/li\u003e\n\u003cli\u003eEngine coolant temperature sensor type for accurate temperature readings\u003c\/li\u003e\n\u003cli\u003eManufactured by Walker, a trusted brand in automotive components\u003c\/li\u003e\n\u003cli\u003ePart of the Walker Products line, known for reliable engine management parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Walker Products Line\u003c\/h2\u003e\u003cp\u003eWalker Products offers a range of automotive components focused on engine management and emission control. The Engine Coolant Temperature Sensor 211-1006 is part of this line, providing dependable temperature sensing solutions that help maintain engine efficiency and emissions compliance for Honda Prelude vehicles.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Walker 211-1006 Engine Coolant Temperature Sensor is engineered to deliver precise temperature data to the engine control unit (ECU) of Honda Prelude models. Accurate coolant temperature readings are essential for regulating fuel injection, ignition timing, and cooling fan operation. This sensor helps maintain the engine within its optimal temperature range, contributing to fuel efficiency and engine longevity.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eHelps avoid poor fuel economy caused by incorrect temperature readings\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine misfires related to faulty coolant temperature sensing\u003c\/li\u003e\n\u003cli\u003eSupports proper operation of cooling fans and emission controls\u003c\/li\u003e\n\u003cli\u003eAssists in maintaining stable engine idle and performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Walker 211-1006 sensor on a Honda Prelude, ensure the engine is cool to avoid burns. Disconnect the battery before removal to prevent electrical shorts. Carefully remove the old sensor and inspect the mounting area for debris or corrosion. Use the correct torque specifications when installing the new sensor to avoid damage. Verify proper electrical connections and test the sensor function after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for the 211-1006 Engine Coolant Temperature Sensor. Each unit undergoes testing to ensure reliable performance and durability. While specific warranty details are not provided here, Walker typically offers coverage against manufacturing defects. Refer to the product packaging or official documentation for exact warranty terms.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513425363125,"sku":"DKHD-211-1006","price":35.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111006_Fro.jpg?v=1774736957"},{"product_id":"walker-211-1007-engine-coolant-temperature-sensor","title":"Walker 211-1007 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Walker Engine Coolant Temperature Sensor 211-1007\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor 211-1007 is designed for precise temperature monitoring in Acura and Honda vehicles. This sensor is compatible with popular models such as the Civic and Integra, ensuring reliable engine performance and efficient temperature regulation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura and Honda Civic and Integra models\u003c\/li\u003e\n\u003cli\u003ePart number 211-1007 for accurate identification\u003c\/li\u003e\n\u003cli\u003eEngine coolant temperature sensor for monitoring engine heat levels\u003c\/li\u003e\n\u003cli\u003eManufactured by Walker Products, a trusted brand in automotive components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor 211-1007 plays a critical role in monitoring the temperature of the engine coolant. By providing real-time temperature data to the vehicle’s engine control unit (ECU), it helps maintain optimal engine operation and prevents overheating. This sensor is specifically designed to fit Acura and Honda vehicles, including the Civic and Integra models, ensuring proper fitment and function. The part number 211-1007 allows for easy identification and replacement, supporting maintenance and repair tasks.\u003c\/p\u003e\u003ch2\u003eWalker Products Brand Line Information\u003c\/h2\u003e\u003cp\u003eWalker Products offers a range of automotive components known for their reliability and compatibility with various vehicle makes and models. The Engine Coolant Temperature Sensor 211-1007 is part of their sensor category, which focuses on delivering precise and durable sensors that meet OEM specifications. This product line supports accurate engine management and contributes to vehicle longevity by ensuring critical engine parameters are monitored effectively.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by monitoring coolant temperature\u003c\/li\u003e\n\u003cli\u003eSupports accurate engine temperature readings for efficient fuel management\u003c\/li\u003e\n\u003cli\u003eResolves issues related to erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance problems caused by faulty temperature sensors\u003c\/li\u003e\n\u003cli\u003ePrevents potential engine damage due to incorrect temperature data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the vehicle is cool before sensor replacement to avoid burns\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Acura or Honda Civic and Integra models before installation\u003c\/li\u003e\n\u003cli\u003eUse proper tools to avoid damaging the sensor or surrounding components\u003c\/li\u003e\n\u003cli\u003eCheck for coolant leaks after installation to maintain system integrity\u003c\/li\u003e\n\u003cli\u003eReset the vehicle’s ECU if necessary to recognize the new sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for the Engine Coolant Temperature Sensor 211-1007 to ensure durability and accurate performance. While specific warranty details are not provided here, Walker Products typically offers coverage consistent with industry standards for automotive sensors. Buyers should consult product documentation or authorized sources for exact warranty information.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513425428661,"sku":"DKHD-211-1007","price":42.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111007_Fro.jpg?v=1774736957"},{"product_id":"walker-211-1008-engine-coolant-temperature-sensor","title":"Walker 211-1008 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Honda Accord and Civic\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor, part number 211-1008, is designed specifically for Honda Accord and Civic models. This sensor plays a critical role in monitoring engine temperature to ensure optimal performance and prevent overheating.\u003c\/p\u003e\u003ch2\u003eKey Features of Walker Products Engine Coolant Temperature Sensor 211-1008\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Accord and Civic vehicles\u003c\/li\u003e\n\u003cli\u003eAccurate temperature readings for engine management systems\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eDirect replacement part with OEM fitment\u003c\/li\u003e\n\u003cli\u003ePart number 211-1008 ensures precise identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout Walker Products Brand Line\u003c\/h2\u003e\u003cp\u003eWalker Products offers a range of automotive components focused on reliability and precision. Their Engine Coolant Temperature Sensors are engineered to meet or exceed OEM specifications, providing consistent and accurate temperature data essential for engine control units. The 211-1008 sensor is part of this product line, ensuring compatibility and quality for Honda vehicles.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Walker 211-1008 Engine Coolant Temperature Sensor is engineered to provide accurate temperature feedback to the engine control module in Honda Accord and Civic models. This sensor helps regulate fuel injection, ignition timing, and emission controls by monitoring the coolant temperature. Proper sensor function is vital for maintaining engine efficiency and preventing damage caused by overheating or incorrect temperature readings.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eHelps resolve poor fuel economy related to faulty temperature readings\u003c\/li\u003e\n\u003cli\u003eEliminates rough idling caused by incorrect coolant temperature signals\u003c\/li\u003e\n\u003cli\u003eReduces emission problems linked to sensor malfunctions\u003c\/li\u003e\n\u003cli\u003eAssists in avoiding engine stalling due to temperature sensor failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Walker 211-1008 sensor, ensure the engine is cool to avoid burns. Disconnect the battery before removal to prevent electrical shorts. Use appropriate tools to avoid damaging the sensor or surrounding components. Verify the sensor connector is secure after installation to maintain proper electrical contact.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for their Engine Coolant Temperature Sensors. The 211-1008 part undergoes rigorous testing to ensure durability and accuracy. While specific warranty details may vary, Walker typically offers coverage against manufacturing defects to provide confidence in product reliability.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513425494197,"sku":"DKHD-211-1008","price":39.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111008_Fro.jpg?v=1774736957"},{"product_id":"walker-211-1009-engine-coolant-temperature-sensor","title":"Walker 211-1009 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Walker Engine Coolant Temperature Sensor\u003c\/h2\u003e\u003cp\u003eThe Walker 211-1009 Engine Coolant Temperature Sensor is designed for precise temperature monitoring in Acura and Honda vehicles. This sensor helps maintain optimal engine performance by providing accurate coolant temperature readings for models such as the Accord, Legend, and Prelude.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura and Honda Accord, Legend, and Prelude models\u003c\/li\u003e\n\u003cli\u003ePart number 211-1009 ensures exact fit and function\u003c\/li\u003e\n\u003cli\u003eEngine coolant temperature sensor type for reliable temperature measurement\u003c\/li\u003e\n\u003cli\u003eManufactured by Walker under the Walker Products line\u003c\/li\u003e\n\u003cli\u003eGTIN 00724620100673 for easy identification and ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Walker Products Line\u003c\/h2\u003e\u003cp\u003eWalker Products offers a range of automotive components focused on engine management and emissions control. The Walker 211-1009 sensor is part of this line, emphasizing quality and compatibility with specific vehicle makes and models. This product line supports accurate engine temperature monitoring, which is critical for engine efficiency and emissions compliance.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Walker 211-1009 Engine Coolant Temperature Sensor is engineered to provide accurate temperature data to the engine control unit (ECU) in Acura and Honda vehicles. By monitoring the coolant temperature, this sensor helps regulate fuel injection and ignition timing, contributing to efficient engine operation. It is specifically designed to fit models including the Honda Accord, Legend, and Prelude, ensuring proper installation and performance. The sensor's precise construction supports consistent readings, which are essential for preventing engine overheating and maintaining optimal fuel economy.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate temperature data\u003c\/li\u003e\n\u003cli\u003eSupports proper fuel mixture adjustments for improved engine efficiency\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine stalling or rough idling caused by faulty temperature readings\u003c\/li\u003e\n\u003cli\u003eAssists in maintaining emissions control by ensuring correct engine temperature monitoring\u003c\/li\u003e\n\u003cli\u003eAddresses check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with Acura and Honda Accord, Legend, and Prelude models before installation\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery before replacing the sensor to avoid electrical issues\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damaging the sensor or surrounding components\u003c\/li\u003e\n\u003cli\u003eCheck for coolant leaks after installation and refill coolant if necessary\u003c\/li\u003e\n\u003cli\u003eVerify sensor operation with a diagnostic tool post-installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for the 211-1009 Engine Coolant Temperature Sensor. Each unit undergoes testing to ensure durability and accurate performance. While specific warranty details are not provided here, Walker typically offers coverage against manufacturing defects. For warranty information, refer to the product packaging or contact the manufacturer directly.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513425526965,"sku":"DKHD-211-1009","price":38.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111009_Fro.jpg?v=1774736958"},{"product_id":"walker-211-1010-engine-coolant-temperature-sensor","title":"Walker 211-1010 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Mitsubishi Mighty Max\u003c\/h2\u003e\u003cp\u003eThe Walker Products 211-1010 Engine Coolant Temperature Sensor is designed specifically for Mitsubishi Mighty Max vehicles. This sensor plays a critical role in monitoring engine temperature to ensure optimal performance and prevent overheating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mitsubishi Mighty Max models\u003c\/li\u003e\n\u003cli\u003ePart number 211-1010 for precise fitment\u003c\/li\u003e\n\u003cli\u003eEngine coolant temperature sensor type for accurate temperature readings\u003c\/li\u003e\n\u003cli\u003eManufactured by Walker Products, a trusted brand in automotive components\u003c\/li\u003e\n\u003cli\u003eSupports engine management and cooling system efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout Walker Products Brand Line\u003c\/h2\u003e\u003cp\u003eWalker Products offers a range of automotive components focused on durability and reliability. Their sensors, including the 211-1010 Engine Coolant Temperature Sensor, are engineered to meet OEM specifications, ensuring proper integration with vehicle systems such as the Mitsubishi Mighty Max cooling and engine management systems.\u003c\/p\u003e\u003ch2\u003eProduct Description and Function\u003c\/h2\u003e\u003cp\u003eThe 211-1010 Engine Coolant Temperature Sensor from Walker Products monitors the temperature of the engine coolant in Mitsubishi Mighty Max vehicles. By providing real-time temperature data to the engine control unit (ECU), it helps regulate fuel injection, ignition timing, and cooling fan operation. This sensor is essential for maintaining engine efficiency and preventing damage caused by overheating.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngine overheating due to inaccurate temperature readings\u003c\/li\u003e\n\u003cli\u003ePoor fuel economy caused by incorrect engine temperature data\u003c\/li\u003e\n\u003cli\u003eErratic engine performance or stalling related to faulty coolant temperature sensing\u003c\/li\u003e\n\u003cli\u003eCheck engine light triggered by sensor failure\u003c\/li\u003e\n\u003cli\u003eCooling fan malfunction resulting from sensor issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Walker Products 211-1010 sensor, ensure the engine is cool to avoid burns. Disconnect the battery before removal to prevent electrical shorts. Use proper tools to avoid damaging the sensor or mounting threads. Verify the sensor connector is secure after installation to maintain accurate readings.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for the 211-1010 Engine Coolant Temperature Sensor. While specific warranty details are not provided here, Walker Products typically offers coverage against manufacturing defects. Refer to the product packaging or manufacturer documentation for exact warranty terms.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513425559733,"sku":"DKHD-211-1010","price":25.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111010_Fro.jpg?v=1774736958"},{"product_id":"walker-211-1012-engine-coolant-temperature-sensor","title":"Walker 211-1012 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Walker Engine Coolant Temperature Sensor 211-1012\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor 211-1012 is designed to provide accurate temperature readings for engine management systems. This sensor is compatible with a wide range of vehicles including Acura, Buick, Cadillac, Chevrolet, GMC, Honda, Hummer, Isuzu, Oldsmobile, and Pontiac models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement Engine Coolant Temperature Sensor\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple GM and Honda vehicles\u003c\/li\u003e\n\u003cli\u003eEnsures precise temperature monitoring for optimal engine performance\u003c\/li\u003e\n\u003cli\u003ePart number 211-1012 for easy identification\u003c\/li\u003e\n\u003cli\u003eManufactured by Walker Products, a trusted brand in automotive sensors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout Walker Products Brand Line\u003c\/h2\u003e\u003cp\u003eWalker Products specializes in automotive sensors and emission control components, providing reliable and precise parts for engine management systems. The 211-1012 Engine Coolant Temperature Sensor is part of this product line, ensuring compatibility and quality for various vehicle makes and models. Walker Products focuses on delivering components that meet OEM specifications to maintain vehicle performance and emissions compliance.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Walker 211-1012 Engine Coolant Temperature Sensor is engineered to monitor the temperature of the engine coolant accurately. This sensor sends temperature data to the vehicle’s engine control unit (ECU), which adjusts fuel injection and ignition timing accordingly. Proper functioning of this sensor is critical for maintaining engine efficiency, reducing emissions, and preventing overheating. It is compatible with numerous vehicles such as the Chevrolet Silverado 1500, GMC Sierra 2500 HD, Honda Passport, and Pontiac Grand Prix, among others.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature readings\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eEliminates engine performance issues related to incorrect temperature data\u003c\/li\u003e\n\u003cli\u003ePrevents poor fuel economy caused by faulty temperature sensing\u003c\/li\u003e\n\u003cli\u003eAddresses check engine light triggers related to coolant temperature sensor faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before sensor replacement to avoid burns\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery before installation to prevent electrical shorts\u003c\/li\u003e\n\u003cli\u003eLocate the sensor on the engine block or cylinder head as per vehicle service manual\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications to avoid sensor damage\u003c\/li\u003e\n\u003cli\u003eVerify sensor connector is clean and secure after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for the 211-1012 Engine Coolant Temperature Sensor to ensure durability and reliable performance. This sensor meets or exceeds OEM specifications for fit and function. While specific warranty details are not provided here, Walker Products typically offers coverage against manufacturing defects. Refer to the product packaging or manufacturer documentation for exact warranty terms.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513425592501,"sku":"DKHD-211-1012","price":19.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111012_Fro_d70c9f6d-0395-49e0-b911-9f7188e57b25.jpg?v=1774736959"},{"product_id":"walker-211-1013-engine-coolant-temperature-sensor","title":"Walker 211-1013 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eOverview of Walker Engine Coolant Temperature Sensor 211-1013\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor 211-1013 is designed for precise temperature monitoring in select Dodge and Mitsubishi vehicles. This sensor helps maintain optimal engine performance by providing accurate coolant temperature readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Dodge Cordia, Mitsubishi Power Ram 50, and Mitsubishi Tredia models\u003c\/li\u003e\n\u003cli\u003ePart number 211-1013 ensures exact fit and function\u003c\/li\u003e\n\u003cli\u003eEngine coolant temperature sensor type for reliable temperature measurement\u003c\/li\u003e\n\u003cli\u003eManufactured by Walker, a trusted name in automotive sensors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Walker Products Engine Coolant Temperature Sensor 211-1013 is engineered to monitor the temperature of the engine coolant accurately. This sensor plays a critical role in the vehicle’s engine management system by sending temperature data to the engine control unit (ECU). Proper temperature readings help regulate fuel injection, ignition timing, and cooling fan operation, which are essential for efficient engine performance and emissions control. This sensor is specifically designed to fit Dodge Cordia and Mitsubishi Power Ram 50 and Tredia models, ensuring compatibility and reliable operation.\u003c\/p\u003e\u003cp\u003eWalker Products is known for producing high-quality automotive components, and their line of sensors is no exception. The 211-1013 sensor is part of their dedicated product line focused on belts and cooling system sensors, providing dependable performance for engine temperature monitoring applications.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing accurate coolant temperature data\u003c\/li\u003e\n\u003cli\u003eSupports proper engine warm-up and fuel efficiency\u003c\/li\u003e\n\u003cli\u003ePrevents erratic temperature gauge readings\u003c\/li\u003e\n\u003cli\u003eReduces risk of engine misfires related to incorrect temperature input\u003c\/li\u003e\n\u003cli\u003eAssists in maintaining optimal emissions control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure the engine is cool before attempting sensor replacement to avoid burns\u003c\/li\u003e\n\u003cli\u003eLocate the existing coolant temperature sensor on the engine block or cylinder head\u003c\/li\u003e\n\u003cli\u003eDisconnect the electrical connector carefully to avoid damage\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to remove the old sensor and install the Walker 211-1013 sensor\u003c\/li\u003e\n\u003cli\u003eCheck for coolant leaks after installation and clear any diagnostic trouble codes if necessary\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for their engine coolant temperature sensors. The 211-1013 sensor undergoes rigorous testing to ensure durability and accurate performance under various operating conditions. While specific warranty details are not provided here, Walker typically offers coverage against manufacturing defects. It is recommended to consult the product documentation or supplier for exact warranty terms.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513426280629,"sku":"DKHD-211-1013","price":28.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111013_Fro.jpg?v=1774736959"},{"product_id":"walker-211-1015-engine-coolant-temperature-sensor","title":"Walker 211-1015 Engine Coolant Temperature Sensor","description":"\u003ch2\u003eReliable Engine Coolant Temperature Sensor for Acura and Honda Vehicles\u003c\/h2\u003e\u003cp\u003eThe Walker Products 211-1015 Engine Coolant Temperature Sensor is designed to provide accurate temperature readings for optimal engine performance. Compatible with a range of Acura, Honda, and Isuzu models, this sensor helps maintain proper engine operation and efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura, Honda, and Isuzu vehicles including Accord, Civic, CR-V, and more\u003c\/li\u003e\n\u003cli\u003ePart number 211-1015 ensures precise fit and function\u003c\/li\u003e\n\u003cli\u003eEngine coolant temperature sensor designed to monitor engine temperature accurately\u003c\/li\u003e\n\u003cli\u003eManufactured by Walker Products, known for quality automotive components\u003c\/li\u003e\n\u003cli\u003eSupports engine management systems by providing critical temperature data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout Walker Products Engine Components\u003c\/h2\u003e\u003cp\u003eWalker Products offers a comprehensive line of automotive parts focused on engine and emission control components. The 211-1015 Engine Coolant Temperature Sensor is part of their sensor category, engineered to meet OEM specifications for reliable performance. This sensor integrates seamlessly with vehicle systems to help maintain engine temperature regulation and support fuel efficiency.\u003c\/p\u003e\u003ch2\u003eProduct Description and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Walker 211-1015 Engine Coolant Temperature Sensor is engineered to deliver accurate temperature readings essential for engine control units (ECUs) in various Acura, Honda, and Isuzu models. It is compatible with popular vehicles such as the Honda Accord, Civic, CR-V, Odyssey, and Acura MDX, RL, and TL. This sensor plays a critical role in monitoring the engine coolant temperature, allowing the ECU to adjust fuel injection and ignition timing accordingly.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent engine overheating by providing real-time temperature data\u003c\/li\u003e\n\u003cli\u003eSupports efficient fuel management and emissions control\u003c\/li\u003e\n\u003cli\u003eResolves erratic temperature gauge readings or warning light triggers\u003c\/li\u003e\n\u003cli\u003eAddresses engine performance issues related to incorrect coolant temperature input\u003c\/li\u003e\n\u003cli\u003ePrevents potential engine damage caused by faulty temperature sensing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Walker 211-1015 sensor, ensure the engine is cool to avoid burns or damage. Disconnect the battery before removal to prevent electrical shorts. Use appropriate tools to remove the old sensor and install the new one securely, avoiding overtightening. Verify proper electrical connections and clear any diagnostic trouble codes after installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eWalker Products maintains strict quality control standards for their engine sensors, including the 211-1015 Engine Coolant Temperature Sensor. While specific warranty details may vary, Walker typically offers coverage against manufacturing defects to ensure reliability and customer confidence in their parts.\u003c\/p\u003e","brand":"Walker","offers":[{"title":"Default Title","offer_id":43513426346165,"sku":"DKHD-211-1015","price":20.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/O2_2111015_Fro.jpg?v=1774736959"}],"url":"https:\/\/www.partcatalog.com\/collections\/sensors-2.oembed?page=19","provider":"PartCatalog","version":"1.0","type":"link"}