{"title":"Suspension \u003e Suspension, Springs and Related Components","description":"\u003cp\u003eSuspension springs and linkage components keep your wheels in contact with the road and your steering geometry where it belongs. This category covers everything from the coil springs and control arms that define your suspension's range of motion to the ball joints, stabilizer bar links, and bushings that connect it all together. Control arms and ball joints typically last 70,000–150,000 miles but wear faster on rough roads or with neglected alignments. Sway bar end links and bushings often go bad by 50,000–80,000 miles, particularly in climates with road salt or frequent pothole exposure. When buying, verify whether your vehicle uses a conventional coil spring or an air suspension setup — air spring conversions are available for common platforms like the Lincoln Navigator and Ford Expedition. For control arms, OEM-spec replacements with pre-pressed bushings simplify installation; performance-oriented polyurethane bushing kits offer longer service life but transmit more NVH into the cabin.\u003c\/p\u003e\n\n\u003ch3\u003eSigns you need replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClunking or knocking over bumps\u003c\/strong\u003e — A single loud clunk when hitting a pothole or speed bump points to a worn ball joint, loose control arm bushing, or failed stabilizer bar end link. Isolate the source by pushing and pulling the wheel at 9 and 3 o'clock (ball joint) versus 12 and 6 o'clock (tie rod) before ordering parts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle pulls to one side or wanders at highway speed\u003c\/strong\u003e — A collapsed coil spring or worn control arm bushing shifts suspension geometry out of spec, causing persistent drift that alignment adjustments alone won't fix. Compare measured ride height side-to-side; more than 1 inch of difference suggests a fatigued or broken spring.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSqueaking or creaking from the front end during slow turns or parking lot maneuvers\u003c\/strong\u003e — Dry or cracked ball joint boots and deteriorated stabilizer bar bushings are the most common culprits. The noise typically worsens in cold weather as rubber loses elasticity.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUneven or accelerated tire wear\u003c\/strong\u003e — Cupping, feathering, or wear on only the inner or outer edge of a tire often traces back to a bent or bushing-worn control arm affecting camber or toe. Replacing the tire without fixing the suspension component means the new tire wears out fast too.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRear of vehicle sagging or nose sitting lower than normal\u003c\/strong\u003e — A broken or fatigued coil spring causes visible ride height loss on one corner. Air suspension systems show this as a corner that doesn't rise on startup or a compressor that runs continuously — signs of a failed air spring or leaking solenoid valve.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoose, vague, or unstable steering feel\u003c\/strong\u003e — Excessive play in a ball joint or a worn steering knuckle allows wheel camber to shift dynamically under load, making the vehicle feel disconnected on turn-in and unsettled over mid-corner bumps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHow often should control arm bushings and ball joints be inspected?\u003c\/strong\u003e\n  Most manufacturers recommend inspecting ball joints and bushings every 30,000 miles or at each tire rotation. Ball joints on load-bearing lower control arms wear faster and should be checked for play using a floor jack under the lower arm — measurable vertical play means replacement is overdue regardless of mileage.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAre aftermarket control arms and ball joints as reliable as OEM parts?\u003c\/strong\u003e\n  Quality varies significantly. Brands like Moog, TRW, and Delphi manufacture to OEM tolerances and are widely trusted for daily-driver applications. Avoid unbranded budget assemblies, especially for ball joints — a failed ball joint causes loss of vehicle control. OEM parts are worth the premium on vehicles still under warranty or for owners who want direct fit without fitment guesswork.\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWhat should I replace at the same time as control arms or ball joints?\u003c\/strong\u003e\n  If replacing a lower control arm assembly, do both sides simultaneously to maintain balanced handling — parts fail at similar mileage. Replace the stabilizer bar end links at the same time if they show wear, since you're already in the same area. Budget $150–$600 per axle for parts depending on vehicle; factor in an alignment immediately after any control arm or ball joint replacement.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"arnott-a-2105-air-suspension-spring","title":"Arnott A-2105 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2105\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2105 is designed specifically for Ford, Lincoln, and Mercury vehicles, including the Crown Victoria, Town Car, and Grand Marquis models. This air suspension spring offers reliable performance with a durable rubber bellows and standard grade construction.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Crown Victoria, Lincoln Town Car, and Mercury Grand Marquis\u003c\/li\u003e\n\u003cli\u003ePart number A-2105 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.59 thickness\u003c\/li\u003e\n\u003cli\u003eSleeve style design with base cup lower mount and stud upper mount\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW line represents a focused range of air suspension components engineered for dependable replacement parts. The A-2105 air suspension spring features a black rubber bellows constructed with a thickness of 2.59, providing a balance of flexibility and strength. Its sleeve style design ensures proper fitment and function within the suspension system. The lower mount uses a base cup type, while the upper mount is a stud style, matching original equipment specifications for the Ford Crown Victoria, Lincoln Town Car, and Mercury Grand Marquis. This part does not include mounting hardware, bearing plates, or boots, so these components should be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eApplications and Common Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or leaking air suspension springs on compatible Ford, Lincoln, and Mercury models\u003c\/li\u003e\n\u003cli\u003eRestoring proper ride height and suspension performance on Crown Victoria, Town Car, and Grand Marquis vehicles\u003c\/li\u003e\n\u003cli\u003eAddressing air spring bellows damage or cracking due to age or environmental exposure\u003c\/li\u003e\n\u003cli\u003eFixing suspension sag or uneven ride quality caused by failing air springs\u003c\/li\u003e\n\u003cli\u003eMaintaining vehicle stability and comfort by replacing compromised suspension components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Recommendations\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2105 air suspension spring requires proper tools and mechanical knowledge. Since mounting hardware is not included, ensure all necessary bolts, nuts, and related components are available before beginning installation. Verify compatibility with the specific vehicle model and year. It is recommended to inspect related suspension parts such as bearing plates and boots, replacing them if worn to ensure optimal performance. Professional installation is advised to maintain safety and suspension integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eArnott’s NEW product line adheres to industry standards for air suspension components, focusing on durability and fitment accuracy. While mounting hardware and additional components are not included, the air spring itself is manufactured with quality rubber bellows and tested for performance. Warranty details should be confirmed with the supplier or manufacturer, as they may vary based on purchase location and specific product terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832426165,"sku":"DDWG-A-2105","price":128.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2105_Fro_d8861465-bc01-4875-a594-609b77aa047b.jpg?v=1774702983"},{"product_id":"arnott-a-2202-air-suspension-spring","title":"Arnott A-2202 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2202\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2202 is designed specifically for Land Rover Discovery models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes all necessary mounting hardware for a straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Land Rover Discovery vehicles\u003c\/li\u003e\n\u003cli\u003ePart number A-2202 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.59 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for easy installation\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eSleeve style design for improved durability\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2202 is engineered with black rubber bellows that measure 2.59 in thickness, ensuring a balance of flexibility and strength. The sleeve style construction enhances the durability of the air spring, making it suitable for the demands of Land Rover Discovery suspension systems. This part features a stud-type upper mount and a base cup lower mount, designed to fit securely within the vehicle's suspension assembly. While the bearing plate and boot are not included, the package comes complete with all necessary mounting hardware to facilitate installation.\u003c\/p\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet standard grade specifications, providing dependable performance without compromising on quality. This air suspension spring is part of that line, offering a reliable replacement option for Land Rover Discovery owners seeking to maintain or restore their vehicle's ride quality.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle leveling\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by cracked or brittle bellows\u003c\/li\u003e\n\u003cli\u003eImproves suspension response and comfort\u003c\/li\u003e\n\u003cli\u003eAddresses suspension sagging or uneven stance issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with Land Rover Discovery before installation\u003c\/li\u003e\n\u003cli\u003eUse the included mounting hardware for secure fitment\u003c\/li\u003e\n\u003cli\u003eInspect surrounding suspension components during replacement\u003c\/li\u003e\n\u003cli\u003eFollow vehicle manufacturer torque specifications for mounts\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended for safety and performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-2202, are manufactured to meet standard grade quality requirements. The product undergoes rigorous testing to ensure durability and performance. Mounting hardware is included to support proper installation. Warranty details are provided by Arnott and typically cover defects in materials and workmanship; please refer to Arnott's official warranty policy for specific terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832458933,"sku":"DDWG-A-2202","price":194.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2202_Ang_f18169d4-2d86-423a-8f6c-ae728c61f68b.jpg?v=1774702986"},{"product_id":"arnott-a-2212-air-suspension-spring","title":"Arnott A-2212 Air Suspension Spring - Rear Left","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2212\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2212 is designed specifically for Lincoln Continental models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes all necessary mounting hardware for a straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lincoln Continental vehicles\u003c\/li\u003e\n\u003cli\u003ePart number A-2212 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.49 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for ease of installation\u003c\/li\u003e\n\u003cli\u003eStandard grade type with sleeve style design\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eDoes not include bearing plate or boot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2212 is engineered with black rubber bellows that measure 2.49 in thickness, ensuring durability and flexibility under load. The sleeve style design enhances the spring's ability to absorb shocks and maintain ride height. This air spring uses a base cup lower mount and a stud upper mount, providing secure attachment points compatible with Lincoln Continental suspension systems. While the product does not include a bearing plate or boot, it comes complete with all necessary mounting hardware to facilitate installation.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components tailored to specific vehicle applications. This line emphasizes quality materials and precise fitment, as demonstrated by the A-2212 air suspension spring designed for Lincoln Continental models. The NEW line aims to provide components that meet or exceed OEM standards for suspension performance and durability.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or leaking air suspension springs on Lincoln Continental\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks causing suspension sag or uneven ride\u003c\/li\u003e\n\u003cli\u003eAddresses noise or vibration issues related to damaged bellows\u003c\/li\u003e\n\u003cli\u003eImproves overall suspension responsiveness and comfort\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2212 air suspension spring requires basic suspension knowledge and tools. Since mounting hardware is included, ensure all components are used during installation for secure fitment. Verify the base cup lower mount and stud upper mount align correctly with the vehicle’s suspension points. It is recommended to inspect related suspension components during installation to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-2212, are manufactured to meet industry standards for durability and performance. The product includes mounting hardware to support proper installation. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. Consult Arnott or authorized distributors for exact warranty terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832491701,"sku":"DDWG-A-2212","price":134.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2212_Fro.jpg?v=1774702986"},{"product_id":"arnott-a-2220-air-suspension-spring","title":"Arnott A-2220 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2220\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2220 is designed specifically for Ford, Lincoln, and Mercury vehicles, including the Crown Victoria, Town Car, and Grand Marquis models. This air suspension spring offers reliable performance with included mounting hardware and durable rubber bellows.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Crown Victoria, Lincoln Town Car, Mercury Grand Marquis\u003c\/li\u003e\n\u003cli\u003ePart number A-2220 from Arnott's NEW product line\u003c\/li\u003e\n\u003cli\u003eStandard grade rubber bellows with 2.59 thickness for durability\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for straightforward installation\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eSleeve style design with black bellows color\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2220 features a rubber bellows constructed with a thickness of 2.59, providing a balance of flexibility and strength. The black bellows are designed in a sleeve style, which helps maintain consistent air pressure and suspension performance. This part includes mounting hardware to facilitate installation but does not include a bearing plate or boot. The upper mount uses a stud type, while the lower mount is a base cup, ensuring proper fitment and secure attachment to the vehicle's suspension system.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet standard grade specifications. This line emphasizes compatibility and quality materials, such as rubber bellows with precise thickness, to maintain suspension integrity. The A-2220 air suspension spring is part of this line, offering a reliable replacement option for specific Ford, Lincoln, and Mercury models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and suspension support on Ford Crown Victoria, Lincoln Town Car, and Mercury Grand Marquis\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs causing uneven ride or sagging\u003c\/li\u003e\n\u003cli\u003eAddresses air leaks or bellows failure in the suspension system\u003c\/li\u003e\n\u003cli\u003eImproves vehicle handling and comfort by maintaining correct air pressure\u003c\/li\u003e\n\u003cli\u003eEliminates noise or vibration related to faulty suspension springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2220 air suspension spring requires basic suspension knowledge and tools. The included mounting hardware simplifies the process, but care should be taken to ensure the stud upper mount and base cup lower mount are properly aligned. It is recommended to inspect related suspension components during installation and replace any worn parts to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott provides quality assurance for the A-2220 air suspension spring, manufactured with standard grade materials including durable rubber bellows. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. Buyers should consult product documentation or the manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832524469,"sku":"DDWG-A-2220","price":138.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2220_Fro_ce780f31-8528-4334-9270-e17c4c8cbf41.jpg?v=1774702986"},{"product_id":"arnott-a-2501-air-suspension-spring","title":"Arnott A-2501 Air Suspension Spring - Rear Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2501\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2501 is designed specifically for BMW X5 models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes mounting hardware for straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW X5 vehicles\u003c\/li\u003e\n\u003cli\u003ePart number A-2501 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.79 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for ease of installation\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eSleeve style design for improved fitment\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2501 is engineered with black rubber bellows that measure 2.79 in thickness, ensuring durability and flexibility under load. The sleeve style design enhances the spring's fit and function within the suspension system. This air spring uses a stud-type upper mount and a base cup lower mount, matching the original equipment specifications for BMW X5 models. While the product does not include a bearing plate or boot, it comes complete with all necessary mounting hardware to facilitate installation. The standard grade type ensures the part meets typical performance and durability requirements for air suspension springs.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet OEM standards. This line includes air suspension springs like the A-2501, designed to provide reliable replacement parts for specific vehicle applications such as the BMW X5. The NEW line emphasizes compatibility and quality, offering components that integrate seamlessly with existing suspension systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or leaking air suspension springs on BMW X5\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eAddresses air spring bellows damage or cracking\u003c\/li\u003e\n\u003cli\u003eEliminates suspension noise caused by failing air springs\u003c\/li\u003e\n\u003cli\u003eImproves overall suspension responsiveness and comfort\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2501 air suspension spring requires basic suspension knowledge and tools. The included mounting hardware simplifies the process, but care should be taken to ensure the stud-type upper mount and base cup lower mount are properly aligned. It is recommended to inspect related suspension components during installation and replace any worn parts to maintain system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-2501, are manufactured to meet or exceed OEM specifications. The product undergoes quality control checks to ensure durability and performance. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. Consult product documentation for exact warranty terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832557237,"sku":"DDWG-A-2501","price":168.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2501_Fro_d9fc1e91-5ab4-4a59-8807-9667d7325901.jpg?v=1774702987"},{"product_id":"arnott-a-2502-air-suspension-spring","title":"Arnott A-2502 Air Suspension Spring - Rear Left","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2502\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2502 is designed specifically for BMW X5 models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes mounting hardware for straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW X5 models\u003c\/li\u003e\n\u003cli\u003ePart number A-2502 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.79 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for ease of installation\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eSleeve style design for improved durability\u003c\/li\u003e\n\u003cli\u003eStandard grade type for everyday driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2502 is engineered with black rubber bellows that measure 2.79 in thickness, ensuring a balance of flexibility and strength. The sleeve style construction enhances the durability of the air spring, making it suitable for the demands of the BMW X5 suspension system. This part features a stud-type upper mount and a base cup lower mount, designed to fit securely within the vehicle’s suspension assembly. While the product does not include a bearing plate or boot, it comes with all necessary mounting hardware to facilitate installation.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet standard grade specifications. This line emphasizes compatibility and quality materials, such as rubber bellows with specific thickness, to maintain the integrity of the vehicle’s suspension system. The A-2502 air suspension spring is part of this line, offering a reliable replacement option for BMW X5 owners seeking standard-grade suspension parts.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs on BMW X5\u003c\/li\u003e\n\u003cli\u003eAddresses uneven ride height or sagging suspension\u003c\/li\u003e\n\u003cli\u003eResolves air spring failure causing poor vehicle handling\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks due to damaged bellows\u003c\/li\u003e\n\u003cli\u003eImproves ride comfort and suspension responsiveness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2502 air suspension spring requires basic suspension knowledge and tools. The included mounting hardware simplifies the process, but care should be taken to ensure the stud upper mount and base cup lower mount are properly aligned. It is recommended to inspect related suspension components during installation and replace any worn parts to maintain optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet OEM standards, using quality rubber materials and precise construction methods. The A-2502 part is backed by Arnott’s quality assurance protocols. Please refer to Arnott’s official warranty documentation for specific coverage details.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832590005,"sku":"DDWG-A-2502","price":168.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2502_Fro_0cbf56c9-0646-473e-9b9f-349887703663.jpg?v=1774702987"},{"product_id":"arnott-a-2503-air-suspension-spring","title":"Arnott A-2503 Air Suspension Spring - Rear Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2503\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2503 is designed specifically for BMW X5 models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes mounting hardware for straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW X5 vehicles\u003c\/li\u003e\n\u003cli\u003ePart number A-2503 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.79 mm thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for ease of installation\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eSleeve style design for improved durability\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2503 is engineered with black rubber bellows that measure 2.79 mm in thickness, ensuring flexibility and resistance to wear. The sleeve style construction enhances the spring's durability under various driving conditions. This air spring uses a stud-type upper mount and a base cup lower mount, providing secure attachment points compatible with the BMW X5 suspension system. While the product does not include a bearing plate or boot, it comes complete with all necessary mounting hardware to facilitate installation.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet standard grade specifications. This line emphasizes quality materials and design improvements, such as the rubber bellows and mounting hardware included with the A-2503 air suspension spring. The NEW line is tailored to provide reliable replacement parts for specific vehicle models, including the BMW X5.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or damaged air suspension springs on BMW X5\u003c\/li\u003e\n\u003cli\u003eRestoring proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eEliminating air leaks caused by cracked or brittle bellows\u003c\/li\u003e\n\u003cli\u003eAddressing suspension noise or uneven ride quality\u003c\/li\u003e\n\u003cli\u003eImproving load handling and comfort in air suspension systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2503 air suspension spring requires basic suspension knowledge and tools. The included mounting hardware simplifies the process, but care should be taken to ensure the stud-type upper mount and base cup lower mount are properly aligned. It is recommended to inspect related suspension components during installation and replace any worn parts to maintain system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott provides quality assurance for the A-2503 air suspension spring, manufactured to meet standard grade specifications. The product undergoes rigorous testing to ensure durability and fitment accuracy for BMW X5 models. Warranty details are available through Arnott and typically cover defects in materials and workmanship under normal use.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832622773,"sku":"DDWG-A-2503","price":159.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2503_Fro_7ad8ade5-4695-43b5-9d7b-46e5ce5e5809.jpg?v=1774702987"},{"product_id":"arnott-a-2504-air-suspension-spring","title":"Arnott A-2504 Air Suspension Spring - Rear Left","description":"\u003ch2\u003eOverview of Arnott NEW A-2504 Air Suspension Spring\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2504 air suspension spring is designed specifically for BMW X5 models, providing reliable suspension performance. This air spring features durable rubber bellows and includes mounting hardware for straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW X5 vehicles\u003c\/li\u003e\n\u003cli\u003eStandard grade rubber bellows material\u003c\/li\u003e\n\u003cli\u003eBlack bellows with 2.79 mm thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for ease of installation\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eSleeve style design for durability\u003c\/li\u003e\n\u003cli\u003eDoes not include bearing plate or boot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2504 air suspension spring is engineered to meet the suspension needs of BMW X5 owners. Constructed with black rubber bellows measuring 2.79 mm in thickness, this air spring offers a standard grade of durability suitable for everyday driving conditions. The sleeve style design enhances the component's resilience, while the base cup lower mount and stud upper mount ensure secure attachment within the suspension system. This part comes complete with mounting hardware, simplifying the replacement process. Note that the bearing plate and boot are not included with this air spring.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that maintain OEM specifications. The A-2504 air suspension spring is part of this line, emphasizing quality materials and fitment precision for BMW X5 models. This line is intended to provide reliable replacement parts that integrate seamlessly with existing suspension systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by cracked or brittle bellows\u003c\/li\u003e\n\u003cli\u003eImproves suspension response and comfort\u003c\/li\u003e\n\u003cli\u003eAddresses uneven or sagging suspension issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is securely lifted and supported before installation\u003c\/li\u003e\n\u003cli\u003eUse the included mounting hardware for proper fitment\u003c\/li\u003e\n\u003cli\u003eInspect related suspension components during replacement\u003c\/li\u003e\n\u003cli\u003eVerify upper stud and lower base cup mounts align correctly\u003c\/li\u003e\n\u003cli\u003eCheck for air leaks after installation to confirm seal integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott manufactures the A-2504 air suspension spring to meet standard quality requirements for suspension components. The part is constructed with durable rubber bellows and designed for consistent performance. While specific warranty details are not provided, Arnott products typically adhere to industry standards for reliability and fitment.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832655541,"sku":"DDWG-A-2504","price":159.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2504_Fro_55d7f1c0-ccab-4916-9701-563f9d6e038d.jpg?v=1774702988"},{"product_id":"arnott-a-2523-air-suspension-spring","title":"Arnott A-2523 Air Suspension Spring - Rear","description":"\u003ch2\u003eReliable Air Suspension Spring for Audi Q7, Porsche Cayenne, Volkswagen Touareg\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2523 air suspension spring is engineered to restore proper ride height and improve suspension performance on select luxury SUVs. Designed specifically for Audi Q7, Porsche Cayenne, and Volkswagen Touareg models, this air spring offers durable construction and essential mounting hardware for straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes mounting hardware for complete installation\u003c\/li\u003e\n\u003cli\u003eDurable rubber bellows with 2.79 mm thickness\u003c\/li\u003e\n\u003cli\u003eBlack bellows color for OEM appearance\u003c\/li\u003e\n\u003cli\u003eSleeve style design for reliable air containment\u003c\/li\u003e\n\u003cli\u003eBoot included to protect internal components\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eStandard grade type for everyday driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet or exceed OEM specifications. This line includes air suspension springs like the A-2523, designed to provide consistent performance and durability for premium vehicles such as the Audi Q7, Porsche Cayenne, and Volkswagen Touareg. The NEW line emphasizes quality materials and fitment accuracy to ensure reliable suspension operation.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott A-2523 air suspension spring features a robust rubber bellows with a thickness of 2.79 mm, providing strength and flexibility to withstand road stresses. Its black bellows maintain a factory look while the sleeve style design ensures airtight performance. The included boot protects the internal components from dirt and debris, extending the service life of the spring. The base cup lower mount and stud upper mount types are engineered for precise fitment on compatible vehicles. This air spring is supplied with all necessary mounting hardware, simplifying the replacement process.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Audi Q7, Porsche Cayenne, and Volkswagen Touareg\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs\u003c\/li\u003e\n\u003cli\u003eEliminates uneven or sagging suspension issues\u003c\/li\u003e\n\u003cli\u003eImproves ride comfort and vehicle handling\u003c\/li\u003e\n\u003cli\u003ePrevents air leaks that cause compressor overwork\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is safely supported before removing old air spring\u003c\/li\u003e\n\u003cli\u003eUse included mounting hardware for secure installation\u003c\/li\u003e\n\u003cli\u003eCheck compatibility with specific model year and suspension setup\u003c\/li\u003e\n\u003cli\u003eInspect related suspension components during replacement\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-2523, are manufactured to meet OEM standards using high-quality rubber and materials. The product includes mounting hardware and protective boots to ensure durability. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. Verify warranty terms with the supplier or manufacturer documentation.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832688309,"sku":"DDWG-A-2523","price":533.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2523_Fro_6d35b2a1-6d24-4cee-aa66-8f3ce7b5f31a.jpg?v=1774702988"},{"product_id":"arnott-a-2571-air-suspension-spring","title":"Arnott A-2571 Air Suspension Spring - Front Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2571\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2571 is designed for precise fitment on Audi Q7, Porsche Cayenne, and Volkswagen Touareg models. This air suspension spring offers reliable performance with included mounting hardware and durable rubber bellows to maintain vehicle ride quality.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Audi Q7, Porsche Cayenne, Volkswagen Touareg\u003c\/li\u003e\n\u003cli\u003ePart Number: A-2571\u003c\/li\u003e\n\u003cli\u003eBellows made from durable black rubber with 2.79 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and protective boot\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eSleeve style design for improved durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2571 features a sleeve style design with black rubber bellows that measure 2.79 in thickness, providing a balance of flexibility and strength. The spring includes mounting hardware and a protective boot to shield the bellows from debris and wear. The lower mount uses a base cup style, while the upper mount is a stud type, ensuring secure installation and compatibility with the specified vehicle models. This standard grade air spring is engineered to meet OEM specifications for suspension performance and durability.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or leaking air suspension springs on Audi Q7, Porsche Cayenne, and Volkswagen Touareg\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by damaged or cracked bellows\u003c\/li\u003e\n\u003cli\u003eImproves suspension response and comfort\u003c\/li\u003e\n\u003cli\u003ePrevents further damage to suspension components due to faulty springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2571 air suspension spring requires basic suspension knowledge and proper tools. The included mounting hardware and boot simplify the replacement process. Ensure the vehicle is safely lifted and supported before removing the old air spring. Verify the lower base cup and upper stud mounts align correctly with the vehicle’s suspension assembly. Inspect surrounding components for wear during installation to maintain overall suspension integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott’s NEW product line, including the A-2571 air suspension spring, adheres to strict quality standards to ensure reliable performance. The use of high-grade rubber bellows and precise manufacturing processes supports durability and longevity. This part comes with mounting hardware and a protective boot to enhance service life. Warranty details are provided by Arnott and typically cover defects in materials and workmanship under normal use.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832721077,"sku":"DDWG-A-2571","price":533.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2571_Fro_3f4582d7-25ca-4e48-87b7-3e66369feed1.jpg?v=1774702988"},{"product_id":"arnott-a-2572-air-suspension-spring","title":"Arnott A-2572 Air Suspension Spring - Front Left","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2572\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2572 is engineered for reliable performance in Audi Q7, Porsche Cayenne, and Volkswagen Touareg models. Designed with durable rubber bellows and complete mounting hardware, this air suspension spring supports smooth ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Audi Q7, Porsche Cayenne, Volkswagen Touareg\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and protective boot\u003c\/li\u003e\n\u003cli\u003eRubber bellows with 2.79 mm thickness for durability\u003c\/li\u003e\n\u003cli\u003eSleeve style design with black bellows color\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eStandard grade type for everyday driving conditions\u003c\/li\u003e\n\u003cli\u003ePart number A-2572 for precise identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW line represents the latest in air suspension technology, offering components that meet OEM standards for fit and function. The A-2572 air suspension spring features rubber bellows constructed with a thickness of 2.79 mm, providing resilience against wear and environmental factors. Its sleeve style design ensures a secure fit, while the black bellows color maintains a clean appearance. This part includes mounting hardware and a protective boot to safeguard the bellows from debris and damage. The lower mount uses a base cup design, and the upper mount is a stud type, ensuring compatibility with the suspension systems of Audi Q7, Porsche Cayenne, and Volkswagen Touareg vehicles.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and suspension performance\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air springs causing uneven ride\u003c\/li\u003e\n\u003cli\u003eEliminates suspension noise related to damaged bellows\u003c\/li\u003e\n\u003cli\u003eImproves vehicle handling and stability on rough roads\u003c\/li\u003e\n\u003cli\u003ePrevents further damage to suspension components from failed springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2572 air suspension spring requires basic suspension knowledge and appropriate tools. Ensure the vehicle is securely lifted and supported before removing the old air spring. The included mounting hardware and boot simplify the replacement process. Verify the correct orientation of the sleeve style bellows and confirm the base cup lower mount and stud upper mount align properly with the vehicle’s suspension assembly. It is recommended to inspect related suspension components during installation for wear or damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott’s NEW product line adheres to strict quality control standards to ensure durability and performance. The A-2572 air suspension spring is manufactured with high-grade materials and tested for fitment accuracy. This part includes a warranty that covers defects in materials and workmanship, providing confidence in its long-term reliability for Audi Q7, Porsche Cayenne, and Volkswagen Touareg owners.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832753845,"sku":"DDWG-A-2572","price":533.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2572_Fro_88512a85-b72e-44f8-9ccd-1a5912928669.jpg?v=1774702989"},{"product_id":"arnott-a-2575-air-suspension-spring","title":"Arnott A-2575 Air Suspension Spring - Front","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2575\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2575 is designed specifically for select Mercedes-Benz models, including GL and ML series vehicles. This air suspension spring offers reliable performance with included mounting hardware and durable rubber bellows to maintain ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz GL350, GL450, GL500, GL550, ML350, ML450, ML500, ML550, ML63 AMG, GL320, and ML320\u003c\/li\u003e\n\u003cli\u003ePart number A-2575 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.69 thickness for long-lasting use\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and protective boot for installation convenience\u003c\/li\u003e\n\u003cli\u003eFeatures sleeve style design with base cup lower mount and stud upper mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2575 is engineered with a black rubber bellows constructed to a thickness of 2.69, providing a balance of flexibility and durability. This standard grade air spring includes mounting hardware and a protective boot to shield the bellows from debris and environmental damage. The sleeve style design ensures a secure fit, while the base cup lower mount and stud upper mount provide stable attachment points for the suspension system. Note that this part does not include a bearing plate.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet OEM specifications for quality and fitment. This line includes air suspension springs like the A-2575, designed to restore factory ride height and handling characteristics for Mercedes-Benz vehicles. The NEW line emphasizes compatibility and ease of installation with included hardware and protective features.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Mercedes-Benz GL and ML series models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs causing uneven ride or sagging\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks and improves suspension responsiveness\u003c\/li\u003e\n\u003cli\u003eAddresses suspension noise or roughness related to damaged bellows\u003c\/li\u003e\n\u003cli\u003ePrevents further damage to suspension components by maintaining correct air pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2575 air suspension spring requires basic suspension knowledge and tools. The included mounting hardware and boot simplify the process. Ensure the vehicle is safely supported and the air suspension system is depressurized before removal. Verify the correct orientation of the sleeve style spring with base cup lower mount and stud upper mount during installation. It is recommended to inspect related suspension components for wear during replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet or exceed OEM standards. The A-2575 part undergoes rigorous quality control to ensure durability and performance. This product includes a warranty covering defects in materials and workmanship, providing confidence in its reliability for Mercedes-Benz GL and ML series vehicles.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832786613,"sku":"DDWG-A-2575","price":318.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2575_Fro_24082bc9-b76b-4e71-ab38-7abedf0fedae.jpg?v=1774702989"},{"product_id":"arnott-a-2587-air-suspension-spring","title":"Arnott A-2587 Air Suspension Spring - Front","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2587\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2587 is engineered for select Mercedes-Benz models including the R350, R320, R500, R550, and R63 AMG. Designed to restore proper ride height and improve suspension performance, this air spring is a reliable replacement part for vehicles equipped with air suspension systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz R350, R320, R500, R550, and R63 AMG\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and protective boot\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.69 thickness\u003c\/li\u003e\n\u003cli\u003eSleeve style design with base cup lower mount and stud upper mount\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Features and Specifications\u003c\/h2\u003e\u003cp\u003eThis Arnott air suspension spring features a black rubber bellows constructed with a thickness of 2.69 mm, providing durability and flexibility required for air suspension systems. The sleeve style design ensures a secure fit, while the base cup lower mount and stud upper mount types facilitate straightforward installation and reliable mounting. Included mounting hardware and a protective boot help safeguard the air spring from debris and wear. Note that this part does not include a bearing plate.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components that meet or exceed OEM specifications. This air suspension spring A-2587 is part of that line, offering a balance of quality materials and design suited for Mercedes-Benz air suspension systems. The NEW line emphasizes compatibility and durability for a range of suspension-related repairs.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Mercedes-Benz R-Class models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs\u003c\/li\u003e\n\u003cli\u003eEliminates uneven or rough ride quality caused by faulty air springs\u003c\/li\u003e\n\u003cli\u003ePrevents suspension sagging and improves vehicle handling\u003c\/li\u003e\n\u003cli\u003eAddresses air spring failures that trigger suspension warning lights\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2587 air suspension spring requires basic suspension knowledge and proper tools. The included mounting hardware and boot simplify the replacement process. Ensure the vehicle is safely lifted and supported before removing the old air spring. Verify the upper stud and lower base cup mounts align correctly during installation. It is recommended to inspect related suspension components for wear during replacement.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet industry standards for durability and performance. The A-2587 part undergoes quality control inspections to ensure reliability. This product includes mounting hardware and a protective boot to extend service life. Warranty details are provided by Arnott and typically cover defects in materials and workmanship under normal use.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832819381,"sku":"DDWG-A-2587","price":419.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2587_Fro_a9bd889b-1a8a-4ca1-a5d9-5a210fd1c5ad.jpg?v=1774702989"},{"product_id":"arnott-a-2596-air-suspension-spring","title":"Arnott A-2596 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2596\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2596 is engineered for select Mercedes-Benz models, including the GLE, GLS, and ML series. Designed to restore proper ride height and improve suspension performance, this air spring is a reliable replacement part for vehicles equipped with air suspension systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz GLE350, GLE400, GLE500, GLS450, GLS500, ML350, ML400, and related models\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for straightforward installation\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with a thickness of 2.69 mm\u003c\/li\u003e\n\u003cli\u003eStandard grade type with sleeve style design\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eDoes not include bearing plate or boot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2596 features a robust rubber bellows constructed with a 2.69 mm thickness to withstand typical wear and environmental exposure. The black bellows are designed in a sleeve style, providing flexibility and durability for consistent air retention. This standard grade air spring includes mounting hardware to facilitate installation, ensuring a secure fit on the vehicle’s suspension system. The upper mount utilizes a stud type connection, while the lower mount employs a base cup design, matching factory specifications for a direct replacement.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components that meet or exceed OEM standards. This line emphasizes quality materials and precise fitment, making the A-2596 air suspension spring a suitable choice for maintaining the performance and safety of Mercedes-Benz air suspension systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Mercedes-Benz GLE, GLS, and ML models\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by worn or damaged bellows\u003c\/li\u003e\n\u003cli\u003eImproves ride comfort and handling stability\u003c\/li\u003e\n\u003cli\u003eReplaces failed or sagging air springs in air suspension systems\u003c\/li\u003e\n\u003cli\u003eAddresses uneven suspension response and noise issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncludes all necessary mounting hardware for ease of installation\u003c\/li\u003e\n\u003cli\u003eEnsure vehicle is safely supported before removing old air spring\u003c\/li\u003e\n\u003cli\u003eCheck compatibility with specific Mercedes-Benz model and year\u003c\/li\u003e\n\u003cli\u003eInspect related suspension components during replacement\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott provides quality assurance with the A-2596 air suspension spring, manufactured to meet OEM standards. The product includes mounting hardware and is constructed from durable rubber materials designed for longevity. Warranty details should be confirmed with the supplier or manufacturer to ensure coverage specifics.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384832852149,"sku":"DDWG-A-2596","price":223.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2596_Fro_6e59453f-5fe0-455b-aa57-4b632f0e8cac.jpg?v=1774702990"},{"product_id":"arnott-a-2597-air-suspension-spring","title":"Arnott A-2597 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2597\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2597 is designed specifically for select Mercedes-Benz models including the R350, R320, R500, R550, and R63 AMG. This air suspension spring provides reliable support and ride comfort by replacing worn or damaged components with a durable, standard-grade part.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz R350, R320, R500, R550, and R63 AMG\u003c\/li\u003e\n\u003cli\u003ePart number A-2597 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed with black rubber bellows featuring a 2.69 thickness for durability\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for straightforward installation\u003c\/li\u003e\n\u003cli\u003eFeatures sleeve style design with base cup lower mount and stud upper mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2597 utilizes a black rubber bellows made from a 2.69 thickness material, ensuring consistent air retention and flexibility under load. The sleeve style construction enhances durability and performance, while the base cup lower mount and stud upper mount provide secure attachment points tailored to the suspension system of compatible Mercedes-Benz vehicles. This part comes with all necessary mounting hardware, simplifying the replacement process. Note that the bearing plate and boot are not included with this component.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components that meet standard grade specifications. This line emphasizes quality materials and fitment accuracy, as demonstrated by the A-2597 air suspension spring designed for specific Mercedes-Benz models. The NEW line aims to provide dependable replacement parts that maintain the original suspension performance without unnecessary complexity.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by worn or cracked bellows\u003c\/li\u003e\n\u003cli\u003eAddresses uneven or sagging suspension issues\u003c\/li\u003e\n\u003cli\u003eImproves overall ride comfort and handling\u003c\/li\u003e\n\u003cli\u003eReplaces damaged or failed air springs in Mercedes-Benz R-Class models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2597 air suspension spring requires basic suspension knowledge and appropriate tools. The included mounting hardware facilitates a secure fit. Ensure the vehicle is safely supported and the air suspension system is depressurized before removal. Verify the lower base cup and upper stud mounts align correctly with the vehicle’s suspension components. It is recommended to inspect related suspension parts during installation for wear or damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet or exceed OEM standards for fit and function. The A-2597 part undergoes rigorous quality control to ensure durability and performance. This product includes mounting hardware and is backed by Arnott’s standard warranty coverage, providing assurance of reliability for Mercedes-Benz R350, R320, R500, R550, and R63 AMG owners.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833048757,"sku":"DDWG-A-2597","price":229.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2597_Fro_ea61bbe0-3acb-4ce9-8bde-2fc319f50fda.jpg?v=1774702990"},{"product_id":"arnott-a-2610-air-suspension-spring","title":"Arnott A-2610 Air Suspension Spring - Rear","description":"\u003ch2\u003eReliable Air Suspension Spring for Chevrolet and GMC Vehicles\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2610 air suspension spring is engineered to restore proper ride height and improve suspension performance on select Chevrolet, GMC, Saab, Buick, and Oldsmobile models. Designed with durable rubber bellows and included mounting hardware, this air spring offers a dependable replacement for your vehicle's suspension system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet Trailblazer, Trailblazer EXT, GMC Envoy, Envoy XL, Envoy XUV, Bravada, Saab 9-7x, Buick Rainier, and Oldsmobile models\u003c\/li\u003e\n\u003cli\u003ePart number A-2610 for precise identification and fitment\u003c\/li\u003e\n\u003cli\u003eConstructed with black rubber bellows featuring a 2.59 thickness for durability\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for straightforward installation\u003c\/li\u003e\n\u003cli\u003eStandard grade type with sleeve style design\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eDoes not include bearing plate or boot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet OEM specifications. This air suspension spring, part of the NEW line, is designed to provide reliable performance and fitment for a range of GM and Saab vehicles. The line emphasizes quality materials and precise engineering to ensure compatibility and durability.\u003c\/p\u003e\u003ch2\u003eProduct Details and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott A-2610 air suspension spring features a black rubber bellows with a thickness of 2.59, providing resilience against wear and environmental factors. Its sleeve style design supports consistent air pressure containment, while the base cup lower mount and stud upper mount ensure secure attachment to the vehicle's suspension system. The included mounting hardware simplifies the replacement process, although the bearing plate and boot are not included with this part.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Chevrolet Trailblazer and GMC Envoy models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs causing uneven ride quality\u003c\/li\u003e\n\u003cli\u003eAddresses suspension sagging or bottoming out issues\u003c\/li\u003e\n\u003cli\u003eImproves vehicle handling and load support on Buick Rainier and Saab 9-7x\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks that lead to compressor overwork and failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2610 air suspension spring requires basic suspension knowledge and tools. Ensure the vehicle is safely lifted and supported before removing the old air spring. Use the included mounting hardware for secure attachment, and verify the base cup and stud mounts align correctly with the vehicle's suspension components. It is recommended to inspect related suspension parts during installation for wear or damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet or exceed OEM standards. The A-2610 part undergoes rigorous quality control to ensure durability and fitment accuracy. This product includes mounting hardware and is backed by Arnott's standard warranty coverage, providing confidence in its performance and reliability.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833081525,"sku":"DDWG-A-2610","price":127.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2610_Fro_aa9a2916-6ffd-4279-9ef2-95cdb2ef033c.jpg?v=1774702990"},{"product_id":"arnott-a-2612-air-suspension-spring","title":"Arnott A-2612 Air Suspension Spring - Rear","description":"\u003ch2\u003eReliable Air Suspension Spring for Land Rover Range Rover\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2612 air suspension spring is designed specifically for Land Rover Range Rover models requiring precise suspension performance. This air spring provides a direct replacement to restore ride height and comfort without compromising vehicle handling.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Land Rover Range Rover vehicles\u003c\/li\u003e\n\u003cli\u003ePart number A-2612 ensures exact fitment\u003c\/li\u003e\n\u003cli\u003eAir suspension spring designed for suspension, springs, and related components category\u003c\/li\u003e\n\u003cli\u003eManufactured by Arnott under the NEW product line\u003c\/li\u003e\n\u003cli\u003eGTIN 00815710011495 for product identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components tailored to specific vehicle applications. The A-2612 air suspension spring is part of this line, offering a modern replacement option engineered to meet the original equipment specifications for Land Rover Range Rover models.\u003c\/p\u003e\u003ch2\u003eProduct Details and Application\u003c\/h2\u003e\u003cp\u003eThe Arnott A-2612 air suspension spring is engineered to replace worn or damaged air springs in the suspension system of Land Rover Range Rover vehicles. It supports the vehicle’s weight and maintains proper ride height, contributing to a smooth and controlled driving experience. This component is essential for maintaining the integrity of the air suspension system and ensuring consistent performance under varying load conditions.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Air Suspension Spring\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoss of ride height or uneven vehicle stance\u003c\/li\u003e\n\u003cli\u003eAir spring leaks causing suspension failure\u003c\/li\u003e\n\u003cli\u003eReduced ride comfort and handling stability\u003c\/li\u003e\n\u003cli\u003eSuspension noise or harshness due to worn springs\u003c\/li\u003e\n\u003cli\u003eWarning lights related to air suspension faults\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is securely lifted and supported before installation\u003c\/li\u003e\n\u003cli\u003eRelease air pressure from the suspension system prior to removal\u003c\/li\u003e\n\u003cli\u003eCompare the new Arnott A-2612 spring with the original part for verification\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications when tightening fittings\u003c\/li\u003e\n\u003cli\u003eCheck for leaks and proper operation after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott manufactures the A-2612 air suspension spring to meet strict quality standards, ensuring durability and reliable performance. This part is backed by Arnott’s warranty coverage, providing confidence in its fitment and function for Land Rover Range Rover vehicles.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833114293,"sku":"DDWG-A-2612","price":177.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2612_Ang_974d59c4-aa9a-4573-9526-00947766994a.jpg?v=1774702991"},{"product_id":"arnott-a-2642-air-suspension-spring","title":"Arnott A-2642 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2642\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2642 is designed specifically for BMW X5 and X6 models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes all necessary mounting hardware for a straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW X5 and X6 models\u003c\/li\u003e\n\u003cli\u003ePart number A-2642 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.79 mm thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for ease of installation\u003c\/li\u003e\n\u003cli\u003eStandard grade type with sleeve style design\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eDoes not include bearing plate or boot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2642 is engineered with black rubber bellows that measure 2.79 mm in thickness, ensuring durability and flexibility under varying load conditions. The sleeve style design enhances the spring's ability to maintain proper air pressure and suspension height. This air spring uses a base cup lower mount and a stud upper mount, which are compatible with the suspension systems of BMW X5 and X6 vehicles. The package includes all necessary mounting hardware, simplifying the replacement process. Note that this part does not come with a bearing plate or boot, which may need to be sourced separately depending on your vehicle's configuration.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components tailored to specific vehicle applications. This line emphasizes standard grade materials and proven designs, such as the rubber bellows and mounting configurations found in part A-2642. The NEW line aims to provide dependable replacement parts that meet OEM specifications for BMW models like the X5 and X6.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and suspension performance on BMW X5 and X6\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs\u003c\/li\u003e\n\u003cli\u003eAddresses uneven or sagging suspension issues\u003c\/li\u003e\n\u003cli\u003eImproves vehicle stability and handling affected by faulty air springs\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by damaged bellows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2642 air suspension spring requires basic suspension knowledge and appropriate tools. Since mounting hardware is included, ensure all components are used during installation for secure fitment. Verify the lower base cup and upper stud mounts align correctly with your BMW X5 or X6 suspension assembly. It is recommended to inspect related suspension components such as bearing plates and boots, as these are not included with this part and may require replacement to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including part number A-2642, are manufactured to meet or exceed OEM standards for durability and performance. The use of high-quality rubber bellows and precise mounting hardware supports long-term reliability. Warranty details should be confirmed with the distributor or installer, as coverage may vary based on purchase and installation conditions.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833147061,"sku":"DDWG-A-2642","price":188.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2642_Sid_46cc4d35-f095-44d6-b4d2-15fb6d1ef3a8.jpg?v=1774702991"},{"product_id":"arnott-a-2647-air-suspension-spring","title":"Arnott A-2647 Air Suspension Spring - Rear","description":"\u003ch2\u003eReliable Air Suspension Spring for Ford Expedition and Lincoln Navigator\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2647 air suspension spring is designed to restore proper ride height and improve suspension performance for Ford Expedition and Lincoln Navigator models. Engineered with durable rubber bellows and a sleeve-style design, this air spring offers consistent support and reliable operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Expedition and Lincoln Navigator vehicles\u003c\/li\u003e\n\u003cli\u003eStandard grade rubber bellows with 2.59 thickness for durability\u003c\/li\u003e\n\u003cli\u003eSleeve-style air spring construction\u003c\/li\u003e\n\u003cli\u003eBlack bellows color for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet OEM specifications for quality and fitment. The A-2647 air suspension spring is part of this line, ensuring compatibility and performance for select Ford and Lincoln SUVs. This line emphasizes standard grade materials and proven designs to maintain vehicle ride height and handling characteristics.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott A-2647 air suspension spring features a rubber bellows constructed with a thickness of 2.59, providing a balance of flexibility and strength. The sleeve-style design enhances durability under varying load conditions. The black bellows material offers resistance to environmental factors, helping to extend service life. This air spring uses a stud-type upper mount and a base cup lower mount, designed specifically for the suspension systems of Ford Expedition and Lincoln Navigator models. Note that mounting hardware, bearing plate, and boot are not included with this part.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Ford Expedition and Lincoln Navigator\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs\u003c\/li\u003e\n\u003cli\u003eImproves vehicle stability and handling\u003c\/li\u003e\n\u003cli\u003eAddresses uneven or sagging suspension issues\u003c\/li\u003e\n\u003cli\u003eReduces air compressor strain caused by faulty springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2647 air suspension spring requires removal of the old air spring and careful alignment of the stud upper mount and base cup lower mount. Since mounting hardware is not included, reuse existing hardware or source compatible components. Inspect related suspension parts during installation to ensure overall system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet or exceed OEM standards. The A-2647 part undergoes rigorous quality control to ensure durability and fitment accuracy. Warranty coverage details should be confirmed with the supplier or manufacturer.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833179829,"sku":"DDWG-A-2647","price":340.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2647_Fro_085b3189-b896-499d-a310-39d94cef49bd.jpg?v=1774702991"},{"product_id":"arnott-a-2691-air-suspension-spring","title":"Arnott A-2691 Air Suspension Spring - Front","description":"\u003ch2\u003eOverview of Arnott NEW A-2691 Air Suspension Spring\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2691 air suspension spring is designed specifically for Land Rover Range Rover models requiring reliable suspension components. Engineered with durable rubber bellows and a sleeve-style design, this air spring supports smooth ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Land Rover Range Rover vehicles\u003c\/li\u003e\n\u003cli\u003eBellows made from black rubber with 2.59 thickness for durability\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003cli\u003eSleeve-style air spring construction\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW product line offers updated suspension components designed to meet OEM standards. The A-2691 air suspension spring features a black rubber bellows with a thickness of 2.59, providing a balance of flexibility and strength. Its sleeve-style design ensures proper air containment and durability under varying load conditions. The upper mount uses a stud configuration, while the lower mount employs a base cup style, matching the original equipment fitment for Land Rover Range Rover models. This part does not include mounting hardware, bearing plates, or boots, so these components must be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or leaking air suspension springs on Land Rover Range Rover\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle leveling\u003c\/li\u003e\n\u003cli\u003eImproves handling and ride comfort compromised by damaged springs\u003c\/li\u003e\n\u003cli\u003eAddresses air leaks causing compressor overwork or failure\u003c\/li\u003e\n\u003cli\u003ePrevents suspension sagging and uneven tire wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott NEW A-2691 air suspension spring requires proper tools and experience with air suspension systems. Since mounting hardware is not included, ensure all necessary bolts and fittings are available before beginning installation. Verify compatibility with your specific Land Rover Range Rover model year. It is recommended to inspect related suspension components such as compressors and valves during replacement to ensure system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eArnott manufactures the A-2691 air suspension spring to meet or exceed OEM specifications, using quality rubber materials and precise construction methods. While mounting hardware and additional components are not included, the air spring itself is built for durability and consistent performance. Warranty details should be confirmed with the supplier or manufacturer, as they may vary based on purchase location.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833212597,"sku":"DDWG-A-2691","price":244.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2691_Ang_0d996dbe-09a7-4fc6-b973-58c654e110bf.jpg?v=1774702991"},{"product_id":"arnott-a-2692-air-suspension-spring","title":"Arnott A-2692 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2692\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2692 is designed specifically for Land Rover Range Rover models requiring reliable air suspension components. Engineered with durable rubber bellows and a sleeve-style design, this air spring supports smooth ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Land Rover Range Rover vehicles\u003c\/li\u003e\n\u003cli\u003eBellows made from black rubber with 3.2 mm thickness\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003cli\u003eSleeve-style air spring construction\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW brand line represents the latest generation of air suspension components, focusing on quality and fitment accuracy. The A-2692 air suspension spring features a black rubber bellows with a thickness of 3.2 millimeters, providing durability and flexibility under varying load conditions. Its sleeve-style design ensures proper air containment and pressure management. The upper mount uses a stud configuration, while the lower mount is a base cup type, matching the original equipment specifications for Land Rover Range Rover models. This part does not include mounting hardware, bearing plates, or boots, so those components must be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eApplications and Common Repair Uses\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement of worn or leaking air suspension springs on Land Rover Range Rover\u003c\/li\u003e\n\u003cli\u003eRestoring proper ride height and vehicle handling\u003c\/li\u003e\n\u003cli\u003eAddressing air spring bellows cracks or punctures\u003c\/li\u003e\n\u003cli\u003eFixing suspension sag or uneven vehicle stance\u003c\/li\u003e\n\u003cli\u003eImproving air suspension system reliability and comfort\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Recommendations\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2692 air suspension spring requires proper tools and knowledge of air suspension systems. Since mounting hardware and other components are not included, verify existing parts for wear and replace as necessary. Ensure the air spring is installed with the correct orientation of the stud upper mount and base cup lower mount. It is recommended to inspect the entire air suspension system during replacement to maintain optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs undergo rigorous quality control to meet OEM standards. The NEW product line is engineered for durability and fitment precision. While specific warranty details are not provided here, Arnott typically offers limited warranties covering defects in materials and workmanship. Consult product documentation or the manufacturer for exact warranty terms related to part number A-2692.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833245365,"sku":"DDWG-A-2692","price":259.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2692_Fro_1dd84160-5046-4590-9850-411a95f59774.jpg?v=1774702992"},{"product_id":"arnott-a-2724-air-suspension-spring","title":"Arnott A-2724 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW A-2724 Air Suspension Spring\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2724 air suspension spring is engineered for select Mercedes-Benz models, including the CLS350, CLS500, CLS550, E280, E300, E320, E350, E500, and E550. Designed to restore proper ride height and improve suspension performance, this air spring is a reliable replacement component for your vehicle's air suspension system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz CLS and E-Class models\u003c\/li\u003e\n\u003cli\u003eBellows made from durable black rubber with 2.84 mm thickness\u003c\/li\u003e\n\u003cli\u003eStandard grade convoluted bellows design for consistent performance\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2724 air suspension spring features a convoluted bellows constructed from black rubber with a thickness of 2.84 millimeters, providing flexibility and durability under varying load conditions. The standard grade bellows material ensures consistent air retention and resistance to wear. This air spring is designed with a stud-type upper mount and a base cup lower mount, facilitating secure installation on compatible Mercedes-Benz suspension assemblies. Note that mounting hardware, bearing plate, and boot are not included with this part, so existing components may need to be reused or sourced separately.\u003c\/p\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components that meet OEM specifications. This air suspension spring is part of that line, offering a balance of quality and compatibility for Mercedes-Benz vehicles requiring suspension spring replacement.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Mercedes-Benz CLS and E-Class models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs causing uneven ride\u003c\/li\u003e\n\u003cli\u003eImproves vehicle handling and stability by maintaining correct suspension pressure\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks that lead to compressor overwork and failure\u003c\/li\u003e\n\u003cli\u003eAddresses suspension sagging or bottoming out under load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific Mercedes-Benz model and year before installation\u003c\/li\u003e\n\u003cli\u003eRe-use existing mounting hardware if in good condition, as none is included\u003c\/li\u003e\n\u003cli\u003eCarefully inspect upper stud and lower base cup mounts for wear or damage\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for mounting bolts\u003c\/li\u003e\n\u003cli\u003eCheck for air leaks after installation to confirm proper sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eArnott provides this air suspension spring with quality standards aligned to OEM requirements. While mounting hardware and additional components are not included, the bellows material and design meet durability expectations for standard grade applications. Please consult Arnott or your parts provider for specific warranty details related to the A-2724 air suspension spring.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833278133,"sku":"DDWG-A-2724","price":421.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2724_Fro_aa4e09bf-38c7-4257-af42-26aaa5e78d66.jpg?v=1774702992"},{"product_id":"arnott-a-2725-air-suspension-spring","title":"Arnott A-2725 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW A-2725 Air Suspension Spring\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2725 air suspension spring is engineered for select Mercedes-Benz models, including the CLS63 AMG, E63 AMG, CLS55 AMG, and E55 AMG. Designed to restore your vehicle's ride height and comfort, this air spring features durable rubber bellows and specific mounting types for reliable performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz CLS63 AMG, E63 AMG, CLS55 AMG, and E55 AMG\u003c\/li\u003e\n\u003cli\u003ePart number A-2725 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed with black rubber bellows, 2.84 mm thickness\u003c\/li\u003e\n\u003cli\u003eStandard grade convoluted bellows design for consistent air suspension support\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: loop\/eyelet\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2725 air suspension spring utilizes high-quality black rubber bellows with a thickness of 2.84 mm, providing durability and flexibility under varying load conditions. The convoluted bellows design enhances the spring's ability to absorb shocks and maintain ride height. This air spring features a stud-type upper mount and a loop\/eyelet lower mount, ensuring secure attachment to the vehicle's suspension system. Note that mounting hardware, bearing plate, and boot are not included with this part, so existing components may need to be reused or sourced separately.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott represents the latest generation of air suspension components designed to meet OEM specifications. Parts in this line, including the A-2725 air suspension spring, are engineered to provide reliable performance and fitment for specific vehicle models. This ensures compatibility and helps maintain the original suspension characteristics of your Mercedes-Benz CLS63 AMG, E63 AMG, CLS55 AMG, or E55 AMG.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Mercedes-Benz CLS63 AMG and E63 AMG models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs on CLS55 AMG and E55 AMG vehicles\u003c\/li\u003e\n\u003cli\u003eImproves ride comfort and handling stability\u003c\/li\u003e\n\u003cli\u003eAddresses air spring bellows damage or cracking\u003c\/li\u003e\n\u003cli\u003eEliminates air suspension system faults related to spring failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific Mercedes-Benz model before installation\u003c\/li\u003e\n\u003cli\u003eRe-use existing mounting hardware or acquire appropriate hardware as it is not included\u003c\/li\u003e\n\u003cli\u003eInspect related suspension components such as bearing plates and boots during replacement\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to maintain suspension integrity and safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2725 air suspension spring is manufactured to meet standard grade specifications, ensuring consistent performance and durability. While mounting hardware and additional components are not included, the part is designed to OEM fitment standards for Mercedes-Benz CLS63 AMG, E63 AMG, CLS55 AMG, and E55 AMG models. Warranty details should be confirmed with the supplier or manufacturer at the time of purchase.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833310901,"sku":"DDWG-A-2725","price":544.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2725_Fro_4941f810-8206-4c7d-b26a-e4bcc9e33795.jpg?v=1774702992"},{"product_id":"arnott-a-2726-air-suspension-spring","title":"Arnott A-2726 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2726\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2726 is engineered for select Mercedes-Benz models, including the E350, E63 AMG, E500, E55 AMG, and E320. Designed to restore proper ride height and improve suspension performance, this air spring is a reliable replacement component for your vehicle's suspension system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz E350, E63 AMG, E500, E55 AMG, and E320 models\u003c\/li\u003e\n\u003cli\u003ePart number A-2726 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.84 thickness for longevity\u003c\/li\u003e\n\u003cli\u003eStandard grade convoluted bellows design for consistent performance\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: loop\/eyelet\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThis Arnott air suspension spring features a black rubber bellows constructed with a thickness of 2.84 mm, providing a balance of flexibility and durability. The convoluted bellows design helps maintain consistent air pressure and suspension response under varying load conditions. The upper mount utilizes a stud type connection, while the lower mount is designed with a loop\/eyelet for secure attachment. Note that mounting hardware, bearing plate, and boot are not included with this part, so ensure compatibility with your existing components.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components that meet or exceed OEM standards. This line includes air suspension springs like the A-2726, designed to provide consistent performance and durability for luxury vehicles such as Mercedes-Benz. The NEW line emphasizes quality materials and precise fitment to support vehicle suspension systems effectively.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Mercedes-Benz E350, E63 AMG, E500, E55 AMG, and E320 models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs causing uneven or rough ride quality\u003c\/li\u003e\n\u003cli\u003eAddresses air leaks or bellows failure in the suspension system\u003c\/li\u003e\n\u003cli\u003eImproves vehicle stability and handling affected by faulty air springs\u003c\/li\u003e\n\u003cli\u003eSupports suspension system after component wear or damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2726 air suspension spring requires removal of the old air spring and careful alignment of the upper stud and lower loop\/eyelet mounts. Since mounting hardware, bearing plate, and boot are not included, verify that existing components are in good condition or replace as necessary. Proper inflation and leak testing after installation are recommended to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet strict quality standards, using durable rubber bellows and reliable mounting designs. While specific warranty details for part number A-2726 should be confirmed at the time of purchase, Arnott typically offers coverage against defects in materials and workmanship to support long-term use.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833343669,"sku":"DDWG-A-2726","price":305.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2726_Fro_90365640-17e4-44ed-b0a3-026d56d67add.jpg?v=1774702993"},{"product_id":"arnott-a-2735-air-suspension-spring","title":"Arnott A-2735 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2735\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2735 is designed specifically for Ford Expedition and Lincoln Navigator models. This air suspension spring offers reliable performance with included mounting hardware and durable rubber bellows to maintain optimal ride quality.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Expedition and Lincoln Navigator\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for straightforward installation\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.59 thickness\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eSleeve style design for enhanced durability\u003c\/li\u003e\n\u003cli\u003eNo bearing plate or boot included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW product line focuses on delivering updated and reliable suspension components. The A-2735 air suspension spring features black rubber bellows constructed with a thickness of 2.59, providing a balance of flexibility and strength. This sleeve style air spring is engineered with a stud-type upper mount and a base cup lower mount to ensure proper fitment and secure attachment. The standard grade type bellows material is designed to meet OEM specifications for everyday driving conditions. Mounting hardware is included to facilitate a complete and efficient replacement process. Note that this part does not include a bearing plate or boot.\u003c\/p\u003e\u003ch2\u003eApplications and Common Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle leveling on Ford Expedition and Lincoln Navigator\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs causing uneven ride or sagging\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks and improves suspension responsiveness\u003c\/li\u003e\n\u003cli\u003eAddresses noise or vibration issues related to failing air springs\u003c\/li\u003e\n\u003cli\u003eSupports load carrying capacity and improves overall vehicle stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is safely supported before removing old air suspension spring\u003c\/li\u003e\n\u003cli\u003eUse the included mounting hardware for secure and proper installation\u003c\/li\u003e\n\u003cli\u003eCheck compatibility with Ford Expedition and Lincoln Navigator model years before installation\u003c\/li\u003e\n\u003cli\u003eInspect surrounding suspension components for wear during replacement\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for upper stud and base cup mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2735 is manufactured to meet or exceed OEM standards for durability and performance. The use of high-quality rubber bellows and precise mounting configurations ensures reliable operation. While specific warranty details are not provided here, Arnott products typically come with a limited warranty covering defects in materials and workmanship. For exact warranty terms, consult the product documentation or manufacturer.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833376437,"sku":"DDWG-A-2735","price":238.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2735_Ang_26d0be94-2961-4a15-ad19-97e96d349d62.jpg?v=1774702993"},{"product_id":"arnott-a-2737-air-suspension-spring","title":"Arnott A-2737 Air Suspension Spring - Rear Left","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2737\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2737 is designed specifically for BMW 525i, 528i, and 540i models. This air suspension spring offers reliable performance with a durable rubber bellows and a sleeve-style design, ensuring consistent ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW 525i, 528i, and 540i models\u003c\/li\u003e\n\u003cli\u003ePart number A-2737 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 3mm thickness\u003c\/li\u003e\n\u003cli\u003eSleeve-style bellows design for enhanced flexibility\u003c\/li\u003e\n\u003cli\u003eStandard grade type for everyday driving conditions\u003c\/li\u003e\n\u003cli\u003eBase cup lower mount and stud upper mount for secure installation\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2737 features a black rubber bellows constructed with a 3mm thickness, providing a balance of flexibility and durability. The sleeve-style bellows design allows for smooth compression and expansion, which helps maintain ride comfort and vehicle handling. This air spring uses a base cup lower mount and a stud upper mount, ensuring a secure fitment on compatible BMW models. The standard grade type is suitable for typical driving conditions, making it a practical replacement part for maintaining suspension performance.\u003c\/p\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet OEM specifications. This air suspension spring is part of that line, offering a reliable option for BMW owners seeking to restore or maintain their vehicle’s suspension system without altering the original ride characteristics.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs on BMW 525i, 528i, and 540i\u003c\/li\u003e\n\u003cli\u003eAddresses uneven ride height or sagging suspension\u003c\/li\u003e\n\u003cli\u003eImproves vehicle stability and handling affected by damaged springs\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks causing compressor overwork or failure\u003c\/li\u003e\n\u003cli\u003eRestores proper suspension response for a smoother driving experience\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMounting hardware is not included; reuse existing hardware or purchase separately\u003c\/li\u003e\n\u003cli\u003eEnsure compatibility with BMW 525i, 528i, and 540i before installation\u003c\/li\u003e\n\u003cli\u003eInspect related suspension components during replacement for wear or damage\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to ensure proper fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott manufactures the NEW air suspension spring A-2737 to meet or exceed OEM standards. The use of high-quality rubber bellows and precise mounting specifications supports long-term durability. While mounting hardware, bearing plate, and boot are not included, the part is engineered for reliable performance. Warranty details should be confirmed with the supplier or manufacturer, as they may vary.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833409205,"sku":"DDWG-A-2737","price":177.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2737_Fro_93bd70b0-88cc-44a5-a647-c95077ebca50.jpg?v=1774702993"},{"product_id":"arnott-a-2738-air-suspension-spring","title":"Arnott A-2738 Air Suspension Spring - Rear Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2738\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2738 is designed specifically for BMW 525i, 528i, and 540i models. This air suspension spring offers reliable performance with durable rubber bellows and a sleeve-style design to maintain ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW 525i, 528i, and 540i models\u003c\/li\u003e\n\u003cli\u003eStandard grade rubber bellows with 3mm thickness\u003c\/li\u003e\n\u003cli\u003eSleeve-style air spring construction\u003c\/li\u003e\n\u003cli\u003eBlack bellows color for durability and UV resistance\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2738 features a rubber bellows made from standard grade material with a thickness of 3 millimeters, ensuring flexibility and durability under various driving conditions. The black bellows provide resistance to environmental factors such as UV exposure and road debris. This air spring uses a sleeve-style design, which contributes to consistent air retention and smooth suspension response. The lower mount is a base cup type, while the upper mount is a stud, matching the original equipment specifications for the BMW 525i, 528i, and 540i models. Note that this part does not include mounting hardware, bearing plate, or boot, so these components must be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott represents the latest generation of air suspension components designed to meet or exceed OEM standards. This line focuses on delivering reliable, standard-grade materials and construction methods suitable for a range of BMW models. The A-2738 air suspension spring is part of this line, offering a balance of durability and performance for drivers seeking a direct replacement for their factory air springs.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle leveling on BMW 525i, 528i, and 540i\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs causing air loss\u003c\/li\u003e\n\u003cli\u003eEliminates uneven or rough ride quality due to damaged bellows\u003c\/li\u003e\n\u003cli\u003eAddresses suspension sagging or bottoming out under load\u003c\/li\u003e\n\u003cli\u003eImproves overall suspension responsiveness and comfort\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2738 air suspension spring requires careful handling of the rubber bellows to avoid damage. Since mounting hardware is not included, ensure all necessary bolts, nuts, and related components are available before beginning installation. Proper alignment of the base cup lower mount and stud upper mount is critical for secure fitment. It is recommended to inspect related suspension components during installation and replace any worn parts to maintain optimal suspension performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-2738, are manufactured to meet OEM specifications using standard-grade materials. While mounting hardware and additional components are not included, the air spring itself undergoes quality checks to ensure durability and fitment accuracy. Warranty details should be confirmed with the supplier or manufacturer, as coverage may vary.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833441973,"sku":"DDWG-A-2738","price":177.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2738_Fro_8b4bba72-aa26-4e2e-8c5a-69481127a7f6.jpg?v=1774702994"},{"product_id":"arnott-a-2755-air-suspension-spring","title":"Arnott A-2755 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW A-2755 Air Suspension Spring\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2755 air suspension spring is designed specifically for BMW 535i, 535i xDrive, 535xi, and 530xi models. This air spring provides reliable suspension support with durable rubber bellows and a sleeve-style design to maintain ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW 535i, 535i xDrive, 535xi, and 530xi\u003c\/li\u003e\n\u003cli\u003ePart number A-2755 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.59 thickness\u003c\/li\u003e\n\u003cli\u003eSleeve-style air spring construction\u003c\/li\u003e\n\u003cli\u003eStandard grade type for everyday driving conditions\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2755 air suspension spring features a black rubber bellows constructed with a thickness of 2.59, providing a balance of flexibility and durability. The sleeve-style design ensures consistent air retention and smooth suspension response. This air spring is engineered with a stud-type upper mount and a base cup lower mount, allowing for secure installation on compatible BMW models. It is classified as a standard grade type, suitable for typical driving environments without requiring heavy-duty reinforcement. Note that mounting hardware, bearing plate, and boot are not included with this part, so existing components may need to be reused or sourced separately.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott represents the latest generation of air suspension components designed to meet OEM specifications. This line focuses on delivering reliable performance and fitment for specific vehicle applications, such as the BMW 535i and 530xi series. The A-2755 air suspension spring is part of this line, ensuring compatibility and quality consistent with Arnott's standards for replacement suspension parts.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle stance on BMW 535i and 530xi models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs causing uneven ride quality\u003c\/li\u003e\n\u003cli\u003eAddresses air spring failure symptoms such as sagging or excessive bounce\u003c\/li\u003e\n\u003cli\u003eImproves suspension response and handling stability\u003c\/li\u003e\n\u003cli\u003ePrevents further damage to suspension components by maintaining correct air pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW 535i, 535i xDrive, 535xi, and 530xi models; verify fitment before installation\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot are not included; retain or source these parts as needed\u003c\/li\u003e\n\u003cli\u003eEnsure proper torque on stud-type upper mount and secure base cup lower mount\u003c\/li\u003e\n\u003cli\u003eInspect surrounding suspension components during installation for wear or damage\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to maintain suspension integrity and safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW A-2755 air suspension spring is manufactured to meet or exceed OEM standards for durability and performance. While specific warranty details are not provided, Arnott products typically undergo rigorous quality control to ensure reliability. Buyers should consult product documentation or authorized sources for warranty coverage information.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833474741,"sku":"DDWG-A-2755","price":210.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2755_Fro_6adf2724-f85a-4f95-938b-9f4b96bebdc2.jpg?v=1774702994"},{"product_id":"arnott-a-2780-air-suspension-spring","title":"Arnott A-2780 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2780\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2780 is designed specifically for BMW 535i GT, 535i GT xDrive, 550i GT, and 550i GT xDrive models. This air suspension spring provides reliable support and ride comfort by replacing worn or damaged components in your vehicle's suspension system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW 535i GT, 535i GT xDrive, 550i GT, and 550i GT xDrive\u003c\/li\u003e\n\u003cli\u003ePart number A-2780 for precise identification\u003c\/li\u003e\n\u003cli\u003eConstructed with durable black rubber bellows\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003cli\u003eFeatures sleeve style design with 2.59 thickness bellows material\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2780 is engineered with black rubber bellows that measure 2.59 in thickness, providing a balance of flexibility and durability. The sleeve style design enhances the spring's ability to absorb shocks and maintain vehicle stability. This air suspension spring uses a stud-type upper mount and a base cup lower mount, ensuring proper fitment and secure installation on compatible BMW models. The standard grade type indicates this part meets typical OEM specifications without additional performance modifications. Note that mounting hardware, bearing plate, and boot are not included with this part, so these components must be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs on BMW 535i GT and 550i GT models\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle handling\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks that cause suspension sagging or uneven ride\u003c\/li\u003e\n\u003cli\u003eAddresses noise or vibration issues related to damaged bellows\u003c\/li\u003e\n\u003cli\u003eImproves overall suspension system reliability and comfort\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with specific BMW 535i GT and 550i GT models; verify fitment before installation\u003c\/li\u003e\n\u003cli\u003eMounting hardware is not included; retain original hardware or purchase separately\u003c\/li\u003e\n\u003cli\u003eCarefully inspect upper stud and lower base cup mounts for wear before installation\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended due to air suspension system complexity\u003c\/li\u003e\n\u003cli\u003eEnsure proper inflation and leak testing after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW product line focuses on delivering reliable replacement parts that meet standard OEM specifications. The A-2780 air suspension spring undergoes quality control to ensure material integrity and fitment accuracy. While specific warranty details are not provided, Arnott products typically come with a limited warranty covering defects in materials and workmanship. Consult product documentation or supplier for exact warranty terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833507509,"sku":"DDWG-A-2780","price":242.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2780_Fro_e501c14d-54c6-4f2b-bc86-e4537bf79f22.jpg?v=1774702994"},{"product_id":"arnott-a-2790-air-suspension-spring","title":"Arnott A-2790 Air Suspension Spring - Rear Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2790\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2790 is designed specifically for select Mercedes-Benz models, including the CLS and E-Class series. Engineered with durable rubber bellows and standard grade materials, this air suspension spring offers reliable performance for vehicles requiring precise suspension components.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz CLS400, CLS500, CLS550, CLS63 AMG S, E200, E250, E300, E350, E400, E500, E550, E63 AMG, and CLS350 models\u003c\/li\u003e\n\u003cli\u003eConstructed with black rubber bellows featuring a 2.21 thickness for durability\u003c\/li\u003e\n\u003cli\u003eStandard grade convoluted bellows design for consistent air suspension support\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup for secure installation\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2790 utilizes high-quality rubber bellows that are 2.21 mm thick, providing a balance of flexibility and strength necessary for maintaining proper ride height and comfort. The convoluted bellows design enhances the spring's ability to absorb road irregularities while maintaining structural integrity. This air spring features a stud-type upper mount and a base cup lower mount, ensuring compatibility with the suspension systems of various Mercedes-Benz CLS and E-Class models. Note that this part does not include mounting hardware, bearing plates, or boots, so these components must be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott represents the latest generation of air suspension components, focusing on updated materials and manufacturing processes to meet OEM specifications. This line is intended to provide reliable replacement parts that maintain the original suspension performance for Mercedes-Benz vehicles. The A-2790 air suspension spring is part of this line, offering a standard grade solution with durable rubber bellows designed for longevity and consistent operation.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Mercedes-Benz CLS and E-Class models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs causing uneven or rough ride quality\u003c\/li\u003e\n\u003cli\u003eAddresses air spring failures that result in suspension sag or vehicle leaning\u003c\/li\u003e\n\u003cli\u003eImproves handling and stability compromised by damaged suspension components\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks due to cracked or deteriorated rubber bellows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific Mercedes-Benz model and year before installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to safely decompress the air suspension system prior to removal\u003c\/li\u003e\n\u003cli\u003eSince mounting hardware is not included, verify existing hardware condition or acquire replacements as needed\u003c\/li\u003e\n\u003cli\u003eInspect related suspension components such as bearing plates and boots during installation\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for upper stud and lower base cup mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-2790, are manufactured to meet or exceed OEM standards for fit and function. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. It is recommended to consult the product packaging or Arnott’s official documentation for exact warranty terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833540277,"sku":"DDWG-A-2790","price":266.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2790_Fro_8a966907-af3c-4de0-83cc-6e2656e1b415.jpg?v=1774702994"},{"product_id":"arnott-a-2791-air-suspension-spring","title":"Arnott A-2791 Air Suspension Spring - Rear Left","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2791\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2791 is engineered for select Mercedes-Benz models, providing reliable air suspension performance. Designed with durable rubber bellows and standard grade materials, this air spring supports smooth ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz CLS400, CLS500, CLS550, CLS63 AMG S, E200, E250, E300, E350, E400, E500, E550, E63 AMG, and CLS350 models\u003c\/li\u003e\n\u003cli\u003eConstructed with black rubber bellows featuring a 2.21 thickness for durability\u003c\/li\u003e\n\u003cli\u003eStandard grade convoluted bellows design for consistent air suspension support\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup for secure installation\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2791 is designed to replace factory air springs on various Mercedes-Benz CLS and E-Class models. Its black rubber bellows are convoluted and 2.21 mm thick, providing the necessary flexibility and strength to maintain proper suspension height and absorb road irregularities. The standard grade construction ensures compatibility with original equipment specifications without compromising ride comfort or handling. The upper stud mount and base cup lower mount facilitate a secure fitment, although mounting hardware and additional components like bearing plates or boots are not included with this part.\u003c\/p\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated air suspension components that meet OEM standards for fit and function. This air spring is part of that line, offering a direct replacement solution for Mercedes-Benz vehicles requiring reliable suspension repair or maintenance.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Mercedes-Benz CLS and E-Class models\u003c\/li\u003e\n\u003cli\u003eEliminates air spring leaks caused by worn or damaged rubber bellows\u003c\/li\u003e\n\u003cli\u003eAddresses uneven or sagging suspension issues\u003c\/li\u003e\n\u003cli\u003eImproves vehicle handling and stability compromised by failing air springs\u003c\/li\u003e\n\u003cli\u003eReplaces air springs that have lost pressure or structural integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is safely supported before removing old air springs\u003c\/li\u003e\n\u003cli\u003eCheck compatibility with specific Mercedes-Benz model and year before installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damage to mounting studs and base cup\u003c\/li\u003e\n\u003cli\u003eInspect related suspension components during replacement for wear or damage\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for mounting hardware (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott’s NEW air suspension spring A-2791 is manufactured to meet or exceed OEM standards for durability and performance. While mounting hardware and additional components are not included, the part itself undergoes rigorous quality control to ensure reliable operation. Warranty details should be confirmed with the distributor or installer, as Arnott typically offers limited warranties covering defects in materials and workmanship.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833573045,"sku":"DDWG-A-2791","price":269.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2791_Fro_6033ea55-40ba-4702-ac19-ac9b76c8f202.jpg?v=1774702995"},{"product_id":"arnott-a-2831-air-suspension-spring","title":"Arnott A-2831 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2831\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2831 is designed specifically for Land Rover Range Rover models requiring reliable air suspension components. Engineered with durable rubber bellows and a sleeve-style design, this air spring supports smooth ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Land Rover Range Rover vehicles\u003c\/li\u003e\n\u003cli\u003eBellows made from black rubber with 2.69 thickness for durability\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003cli\u003eSleeve-style air spring construction\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2831 features a black rubber bellows with a thickness of 2.69, providing a balance of flexibility and strength necessary for air suspension systems. The sleeve-style design enhances the spring's ability to absorb shocks and maintain ride height. This part includes a stud-type upper mount and a base cup lower mount, ensuring proper fitment and secure installation on compatible Land Rover Range Rover models. Note that mounting hardware, bearing plate, and boot are not included with this part.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components tailored to specific vehicle applications. This air suspension spring A-2831 is part of that line, offering standard grade materials and construction designed to meet the demands of Land Rover Range Rover air suspension systems without unnecessary extras like mounting hardware or boots, allowing for flexible installation options.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or leaking air suspension springs on Land Rover Range Rover\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eAddresses uneven or sagging suspension issues\u003c\/li\u003e\n\u003cli\u003eImproves shock absorption and ride comfort\u003c\/li\u003e\n\u003cli\u003ePrevents further damage to suspension components caused by faulty air springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2831 air suspension spring requires removal of the old air spring and proper alignment of the stud-type upper mount and base cup lower mount. Since mounting hardware is not included, ensure you have the necessary components before beginning installation. It is recommended to inspect related suspension parts during replacement to maintain overall system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet OEM standards for fit and function. The A-2831 part undergoes quality control to ensure durability and performance. Please refer to Arnott's warranty policy for specific coverage details related to this air suspension spring.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833605813,"sku":"DDWG-A-2831","price":303.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2831_Fro_613a9516-5191-45fa-9bc4-c062f0a4fd28.jpg?v=1774702995"},{"product_id":"arnott-a-2861-air-suspension-spring","title":"Arnott A-2861 Air Suspension Spring - Front Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2861\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2861 is designed specifically for BMW X5 models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes essential mounting hardware for a straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW X5 vehicles\u003c\/li\u003e\n\u003cli\u003ePart number A-2861 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable rubber bellows with 2.69 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and protective boot\u003c\/li\u003e\n\u003cli\u003eStandard grade type with sleeve style design\u003c\/li\u003e\n\u003cli\u003eThree mounting studs with bolt upper mount and base cup lower mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2861 is engineered with black rubber bellows that measure 2.69 in thickness, ensuring durability and flexibility under load. The sleeve style bellows design enhances the spring's ability to absorb shocks and maintain ride height. This air spring includes a protective boot to shield internal components from debris and environmental damage. The mounting hardware is included, featuring three mounting studs, a bolt-type upper mount, and a base cup lower mount for secure attachment. Note that this part does not include a bearing plate.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet standard grade specifications. This line emphasizes compatibility and quality materials, such as rubber bellows and complete mounting hardware, to ensure reliable performance and ease of installation. The A-2861 air suspension spring is part of this line, designed to meet the specific needs of BMW X5 air suspension systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on BMW X5 air suspension systems\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air springs causing uneven ride quality\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks from deteriorated bellows\u003c\/li\u003e\n\u003cli\u003eAddresses suspension sagging or failure issues\u003c\/li\u003e\n\u003cli\u003eImproves overall vehicle stability and comfort\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2861 air suspension spring requires basic suspension knowledge and tools. Ensure the vehicle is safely lifted and supported before removing the old air spring. Verify that the mounting studs and hardware are securely fastened, and confirm the bolt upper mount and base cup lower mount are properly aligned. The included mounting hardware and boot simplify the replacement process, but it is recommended to inspect related suspension components during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott provides quality assurance for the A-2861 air suspension spring, manufactured to meet OEM standards. The use of high-grade rubber bellows and included mounting hardware supports durability and reliable performance. Warranty details should be confirmed with the supplier or manufacturer, as coverage may vary.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833638581,"sku":"DDWG-A-2861","price":278.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2861_Fro.jpg?v=1774702996"},{"product_id":"arnott-a-2862-air-suspension-spring","title":"Arnott A-2862 Air Suspension Spring - Front Left","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2862\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2862 is designed specifically for BMW X5 models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes essential mounting hardware for a straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW X5 vehicles\u003c\/li\u003e\n\u003cli\u003ePart number A-2862 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.69 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and protective boot\u003c\/li\u003e\n\u003cli\u003eSleeve style design with base cup lower mount and bolt upper mount\u003c\/li\u003e\n\u003cli\u003eThree mounting studs for secure fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2862 is constructed with black rubber bellows that measure 2.69 in thickness, ensuring durability and flexibility under load. The sleeve style air spring is designed with a base cup lower mount and a bolt-type upper mount, providing a secure and stable connection to the vehicle's suspension system. This air spring includes three mounting studs and comes with mounting hardware and a protective boot to shield the bellows from debris and damage. Note that a bearing plate is not included with this part.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components tailored to specific vehicle applications. This line emphasizes quality materials and fitment accuracy, as demonstrated by the A-2862 air suspension spring designed for BMW X5 models. The NEW line ensures compatibility and performance aligned with OEM standards.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or leaking air suspension springs on BMW X5\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks causing suspension sag or uneven ride\u003c\/li\u003e\n\u003cli\u003eAddresses noise or vibration issues related to damaged bellows\u003c\/li\u003e\n\u003cli\u003eImproves overall suspension responsiveness and comfort\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is safely supported before removing old air spring\u003c\/li\u003e\n\u003cli\u003eVerify part number A-2862 matches the original component\u003c\/li\u003e\n\u003cli\u003eUse included mounting hardware for secure installation\u003c\/li\u003e\n\u003cli\u003eInspect surrounding suspension components during replacement\u003c\/li\u003e\n\u003cli\u003eCheck for proper inflation and absence of leaks after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-2862, are manufactured to meet or exceed OEM specifications. The use of high-quality rubber bellows and precise mounting components ensures durability and reliable performance. This product includes a warranty that covers defects in materials and workmanship, providing confidence in long-term use.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833671349,"sku":"DDWG-A-2862","price":278.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2862_Fro.jpg?v=1774702996"},{"product_id":"arnott-a-2869-air-suspension-spring","title":"Arnott A-2869 Air Suspension Spring - Front","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2869\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2869 is engineered for Audi Allroad Quattro, A6, and A6 Quattro models. Designed to restore proper ride height and suspension performance, this air spring integrates essential features for reliable operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes mounting hardware for straightforward installation\u003c\/li\u003e\n\u003cli\u003eDurable rubber bellows with 2.49 thickness for enhanced longevity\u003c\/li\u003e\n\u003cli\u003eBlack bellows color with sleeve style design\u003c\/li\u003e\n\u003cli\u003eStandard grade type suitable for everyday driving conditions\u003c\/li\u003e\n\u003cli\u003eBoot included to protect internal components\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: threaded\u003c\/li\u003e\n\u003cli\u003eNo bearing plate included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2869 features a robust rubber bellows constructed with a thickness of 2.49, providing durability and resistance to wear. The black bellows utilize a sleeve style design that ensures flexibility and proper air containment. This air spring is designed with a base cup lower mount and a threaded upper mount, facilitating secure attachment to the suspension system. Included mounting hardware and a protective boot simplify installation and help maintain the integrity of the air spring over time. The standard grade type is optimized for typical driving conditions, making it a practical replacement part for Audi Allroad Quattro, A6, and A6 Quattro vehicles.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott represents the latest generation of air suspension components, focusing on updated designs and materials to meet current vehicle specifications. This line includes air springs like the A-2869, which are engineered to provide reliable performance and compatibility with specific Audi models. The NEW line emphasizes quality construction and fitment accuracy to support suspension system restoration.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Audi Allroad Quattro, A6, and A6 Quattro models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs causing uneven or rough ride\u003c\/li\u003e\n\u003cli\u003eAddresses air leaks or bellows failure in the suspension system\u003c\/li\u003e\n\u003cli\u003eImproves vehicle handling and stability compromised by faulty air springs\u003c\/li\u003e\n\u003cli\u003eEliminates suspension noise related to degraded air spring components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all mounting hardware included with the Arnott A-2869 is used for secure fitment\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with Audi Allroad Quattro, A6, and A6 Quattro before installation\u003c\/li\u003e\n\u003cli\u003eInspect surrounding suspension components for wear during replacement\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for upper threaded and lower base cup mounts\u003c\/li\u003e\n\u003cli\u003eUse protective gloves and safety equipment when handling suspension parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-2869, are manufactured to meet OEM standards for fit and function. The product includes mounting hardware and a protective boot to enhance durability. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. It is recommended to consult official Arnott documentation or authorized sources for exact warranty terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833933493,"sku":"DDWG-A-2869","price":279.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2869_Fro_c8ecc3a5-713c-4e9a-bde2-3f14b20cddb8.jpg?v=1774702996"},{"product_id":"arnott-a-2885-air-suspension-spring","title":"Arnott A-2885 Air Suspension Spring - Front","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2885\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2885 is engineered specifically for Audi Allroad Quattro models, providing reliable air suspension performance. Designed with durable rubber bellows and included mounting hardware, this air spring ensures a secure and efficient fit for your vehicle's suspension system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Audi Allroad Quattro\u003c\/li\u003e\n\u003cli\u003ePart number A-2885 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.49 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and protective boot\u003c\/li\u003e\n\u003cli\u003eStandard grade convoluted bellows design\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: threaded\u003c\/li\u003e\n\u003cli\u003eDoes not include bearing plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2885 features a convoluted bellows made from black rubber with a thickness of 2.49, designed to provide consistent air retention and flexibility under load. The spring includes mounting hardware and a protective boot to safeguard against debris and wear. The lower mount utilizes a base cup design, while the upper mount is threaded for secure attachment. This part does not include a bearing plate, which should be sourced separately if required. The standard grade classification indicates suitability for typical driving conditions without specialized performance requirements.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components that meet OEM specifications. This line emphasizes quality materials and precise fitment, ensuring that parts like the A-2885 air suspension spring integrate seamlessly with the vehicle’s existing suspension system. The NEW line is designed to provide dependable replacement options for maintaining vehicle ride height and comfort.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Audi Allroad Quattro models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by damaged bellows\u003c\/li\u003e\n\u003cli\u003eImproves suspension response and vehicle stability\u003c\/li\u003e\n\u003cli\u003eAddresses suspension sagging or uneven ride issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott NEW air suspension spring A-2885 requires proper tools and safety precautions. Ensure the vehicle is securely lifted and the suspension is fully decompressed before removal. The included mounting hardware and boot should be installed as provided to maintain protection and fitment. Verify the threaded upper mount and base cup lower mount align correctly with the vehicle’s suspension components. It is recommended to inspect related suspension parts during installation for wear or damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott provides quality assurance for the NEW air suspension spring A-2885, manufactured to meet or exceed OEM standards. The use of high-grade rubber bellows and precise construction supports durability and performance. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. Consult product documentation or the manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384833999029,"sku":"DDWG-A-2885","price":336.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2885_Fro_99744977-67e6-40ed-8a00-b2721e585167.jpg?v=1774702996"},{"product_id":"arnott-a-2933-air-suspension-spring","title":"Arnott A-2933 Air Suspension Spring - Front Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2933\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2933 is designed specifically for Land Rover Range Rover models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes all necessary mounting hardware for a straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Land Rover Range Rover vehicles\u003c\/li\u003e\n\u003cli\u003ePart number A-2933 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 3.61 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and protective boot\u003c\/li\u003e\n\u003cli\u003eSleeve style design with base cup lower mount and bolt upper mount\u003c\/li\u003e\n\u003cli\u003eThree mounting studs for secure fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2933 is constructed with high-quality rubber bellows, measuring 3.61 in thickness, ensuring durability and flexibility under load. The black bellows are designed in a sleeve style, which helps maintain consistent air pressure and suspension performance. This air spring includes a protective boot to shield the bellows from debris and environmental damage. The lower mount features a base cup design, while the upper mount uses a bolt type for secure attachment. Three mounting studs provide stable and reliable installation. Although a bearing plate is not included, the package comes complete with all necessary mounting hardware to facilitate replacement.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet standard grade specifications. This line emphasizes compatibility and ease of installation, making it suitable for professional repairs and maintenance. The A-2933 air suspension spring is part of this line, offering a balance of quality materials and practical design tailored for Land Rover Range Rover models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle leveling on Land Rover Range Rover\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs causing uneven suspension\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks and improves suspension responsiveness\u003c\/li\u003e\n\u003cli\u003eAddresses suspension sagging or bottoming out issues\u003c\/li\u003e\n\u003cli\u003eImproves overall ride comfort and handling stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2933 air suspension spring requires basic suspension knowledge and tools. Ensure the vehicle is safely lifted and supported before removing the old air spring. Verify that the mounting hardware included matches the vehicle’s specifications. Take care to avoid damaging the rubber bellows during installation. Properly torque the upper bolt mount and secure the three mounting studs to manufacturer specifications. Inspect the protective boot placement to ensure full coverage of the bellows.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eArnott provides this air suspension spring with a focus on standard grade quality and durability. The product includes mounting hardware and a protective boot to enhance longevity. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. For exact warranty terms, consult Arnott’s official documentation or authorized distributors.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834031797,"sku":"DDWG-A-2933","price":320.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2933_Fro_1eceadf5-cf57-4d8a-a7ec-126333f5f32a.jpg?v=1774702997"},{"product_id":"arnott-a-2934-air-suspension-spring","title":"Arnott A-2934 Air Suspension Spring - Front Left","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2934\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2934 is designed specifically for Land Rover Range Rover models requiring reliable air suspension components. This air spring offers a durable rubber bellows and includes essential mounting hardware for a straightforward replacement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Land Rover Range Rover vehicles\u003c\/li\u003e\n\u003cli\u003ePart number A-2934 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 3.61 thickness\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and protective boot\u003c\/li\u003e\n\u003cli\u003eStandard grade type with sleeve style design\u003c\/li\u003e\n\u003cli\u003eThree mounting studs with bolt upper mount and base cup lower mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2934 features a black rubber bellows constructed with a thickness of 3.61, providing reliable flexibility and durability under typical driving conditions. The sleeve style bellows design enhances the spring's ability to maintain proper air pressure and suspension performance. This air spring includes mounting hardware and a protective boot to safeguard the internal components from dirt and debris. The upper mount uses a bolt type connection, while the lower mount is a base cup style, ensuring secure installation. With three mounting studs, this air spring is engineered to fit precisely on compatible Land Rover Range Rover models.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet standard grade specifications. This line emphasizes compatibility and ease of installation, providing components like the A-2934 air suspension spring that come complete with necessary mounting hardware and protective features. The NEW line is designed to support reliable suspension performance for vehicles such as the Land Rover Range Rover.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or leaking air suspension springs on Land Rover Range Rover\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by damaged rubber bellows\u003c\/li\u003e\n\u003cli\u003eAddresses suspension noise or uneven ride quality\u003c\/li\u003e\n\u003cli\u003ePrevents further damage to suspension components due to faulty air springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott NEW air suspension spring A-2934 requires proper tools to handle the bolt upper mount and base cup lower mount securely. Ensure the mounting hardware included is used to maintain correct fitment and safety. It is recommended to inspect related suspension components during replacement to avoid future issues. Proper inflation and leak testing after installation will confirm the air spring is functioning correctly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott provides quality assurance for the A-2934 air suspension spring, manufactured to meet standard grade specifications. The inclusion of mounting hardware and protective boot reflects attention to durability and performance. Warranty details should be confirmed with the product documentation or supplier to ensure coverage terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834097333,"sku":"DDWG-A-2934","price":320.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2934_Ang.jpg?v=1774702997"},{"product_id":"arnott-a-2949-air-suspension-spring","title":"Arnott A-2949 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2949\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2949 is designed specifically for Lexus GX470, Toyota 4Runner, and Land Cruiser models. This air suspension spring offers reliable performance with durable rubber bellows and a standard grade type, ensuring consistent ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus GX470, Toyota 4Runner, and Land Cruiser\u003c\/li\u003e\n\u003cli\u003eBellows made from durable black rubber material\u003c\/li\u003e\n\u003cli\u003eStandard grade type for dependable suspension support\u003c\/li\u003e\n\u003cli\u003eSleeve style design with 2.59 thickness bellows\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2949 features a black rubber bellows constructed with a thickness of 2.59, providing a balance of flexibility and durability. The sleeve style design enhances the spring's ability to absorb shocks and maintain vehicle height. This part includes a stud-type upper mount and a base cup lower mount, which are engineered to fit securely within the suspension system of compatible Lexus and Toyota models. Note that mounting hardware, bearing plate, and boot are not included with this part, so ensure compatibility with your existing components before installation.\u003c\/p\u003e\u003ch2\u003eApplications and Common Suspension Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or damaged air suspension springs on Lexus GX470, Toyota 4Runner, and Land Cruiser\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability\u003c\/li\u003e\n\u003cli\u003eImproves handling and comfort by maintaining suspension integrity\u003c\/li\u003e\n\u003cli\u003eAddresses air spring leaks or bellows deterioration\u003c\/li\u003e\n\u003cli\u003eHelps correct uneven suspension sagging or noise issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your vehicle’s suspension system before installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damage to the rubber bellows and mounts\u003c\/li\u003e\n\u003cli\u003eCheck existing mounting hardware and replace if necessary, as it is not included\u003c\/li\u003e\n\u003cli\u003eFollow manufacturer torque specifications for upper stud and lower base cup mounts\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended for optimal performance and safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2949 is manufactured to meet standard grade specifications, ensuring consistent quality and durability. Arnott’s NEW product line focuses on providing reliable replacement parts that maintain the original suspension performance of Lexus and Toyota vehicles. While mounting hardware and additional components are not included, the air spring itself is built to OEM standards. Please consult Arnott or your parts supplier for warranty details specific to this part number.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834130101,"sku":"DDWG-A-2949","price":209.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2949_Fro_aca5d3a6-9dbc-4444-a10d-507a0b4f8b81.jpg?v=1774702997"},{"product_id":"arnott-a-2960-air-suspension-spring","title":"Arnott A-2960 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-2960\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-2960 is designed specifically for Audi A6, A6 Quattro, and S6 models. This air suspension spring offers reliable performance with a standard grade rubber bellows, engineered to maintain ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Audi A6, A6 Quattro, and S6\u003c\/li\u003e\n\u003cli\u003ePart number A-2960 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.21 thickness\u003c\/li\u003e\n\u003cli\u003eConvoluted bellows design for enhanced flexibility\u003c\/li\u003e\n\u003cli\u003eUpper mount type: stud; lower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-2960 features a black rubber bellows constructed with a thickness of 2.21, providing a balance between durability and flexibility. The convoluted bellows design allows for effective air compression and expansion, essential for maintaining proper suspension dynamics. This standard grade air spring is equipped with a stud-type upper mount and a base cup lower mount, ensuring compatibility with the suspension system of Audi A6, A6 Quattro, and S6 vehicles. Note that mounting hardware, bearing plate, and boot are not included with this part.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet OEM specifications for fit and function. This line emphasizes quality materials and precise engineering, making the A-2960 air suspension spring a suitable replacement part for maintaining the original suspension performance in compatible Audi models.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle balance\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks and suspension sagging\u003c\/li\u003e\n\u003cli\u003eImproves handling and ride comfort on Audi A6, A6 Quattro, and S6\u003c\/li\u003e\n\u003cli\u003eAddresses uneven tire wear caused by faulty suspension springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-2960 air suspension spring requires removal of the old air spring and careful alignment of the stud-type upper mount and base cup lower mount. Since mounting hardware is not included, ensure all necessary components are available before installation. It is recommended to inspect related suspension components during replacement to maintain overall system integrity.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet or exceed OEM standards. While specific warranty details for part number A-2960 are not provided here, Arnott typically offers warranties covering defects in materials and workmanship. Verify warranty terms with the supplier or manufacturer documentation.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834162869,"sku":"DDWG-A-2960","price":310.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A2960_Fro_e937a14b-033d-4a3a-bed8-0cde77823fed.jpg?v=1774702998"},{"product_id":"arnott-a-3010-air-suspension-spring","title":"Arnott A-3010 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3010\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3010 is designed specifically for Jeep Grand Cherokee WK and Grand Cherokee models. This air suspension spring provides reliable support and ride comfort by replacing worn or damaged components in your vehicle's suspension system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Jeep Grand Cherokee WK and Grand Cherokee\u003c\/li\u003e\n\u003cli\u003eBellows made from durable black rubber material\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003cli\u003eSleeve style design with 2.69 thickness bellows\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3010 features a black rubber bellows constructed with a thickness of 2.69, ensuring durability and flexibility under various driving conditions. Its sleeve style design enhances the spring's ability to absorb shocks and maintain vehicle stability. The lower mount uses a base cup type, while the upper mount is a stud type, matching the original equipment specifications for Jeep Grand Cherokee WK and Grand Cherokee models. This part does not include mounting hardware, bearing plate, or boot, so these components must be sourced separately if needed.\u003c\/p\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components that meet or exceed OEM standards. This air suspension spring is part of that line, offering a balance of quality materials and precise fitment for Jeep vehicles requiring suspension repairs or upgrades.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and suspension support on Jeep Grand Cherokee WK and Grand Cherokee\u003c\/li\u003e\n\u003cli\u003eReplaces worn or cracked air suspension springs causing uneven ride or noise\u003c\/li\u003e\n\u003cli\u003eImproves vehicle handling and stability compromised by damaged suspension components\u003c\/li\u003e\n\u003cli\u003eAddresses air leaks or bellows failure in the air suspension system\u003c\/li\u003e\n\u003cli\u003eHelps correct sagging or uneven suspension performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with Jeep Grand Cherokee WK and Grand Cherokee before installation\u003c\/li\u003e\n\u003cli\u003eMounting hardware is not included; verify existing hardware condition or purchase separately\u003c\/li\u003e\n\u003cli\u003eCarefully inspect upper stud and lower base cup mounts for wear or damage\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to maintain suspension integrity and safety\u003c\/li\u003e\n\u003cli\u003eCheck for air leaks after installation to confirm proper sealing of the rubber bellows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott's NEW air suspension spring A-3010 is manufactured to meet standard grade specifications, ensuring consistent performance and durability. While mounting hardware and additional components are not included, the core air spring is built with high-quality rubber bellows designed for longevity. Warranty details should be confirmed with the distributor or installer, as Arnott typically offers coverage against manufacturing defects for their suspension components.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834195637,"sku":"DDWG-A-3010","price":250.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3010_Fro.jpg?v=1774702998"},{"product_id":"arnott-a-3025-air-suspension-spring","title":"Arnott A-3025 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3025\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3025 is designed specifically for Land Rover Discovery and Range Rover models. This air suspension spring offers reliable performance with durable rubber bellows and a standard grade type, ensuring consistent ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Land Rover Discovery and Range Rover\u003c\/li\u003e\n\u003cli\u003eBellows made from durable black rubber material\u003c\/li\u003e\n\u003cli\u003eStandard grade type for reliable suspension support\u003c\/li\u003e\n\u003cli\u003eSleeve style design with 3.61 thickness bellows\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW product line focuses on providing quality replacement air suspension components that meet OEM specifications. The A-3025 air suspension spring features a sleeve style rubber bellows with a thickness of 3.61, designed to withstand typical wear and tear while maintaining proper air pressure containment. The black bellows material offers durability and resistance to environmental factors. This air spring uses a base cup lower mount and a stud upper mount, ensuring proper fitment and secure installation on compatible Land Rover Discovery and Range Rover vehicles. Note that mounting hardware, bearing plate, and boot are not included with this part.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs on Land Rover Discovery and Range Rover\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle handling\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by damaged or cracked bellows\u003c\/li\u003e\n\u003cli\u003eAddresses uneven suspension or sagging issues\u003c\/li\u003e\n\u003cli\u003eImproves overall suspension system reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure compatibility with your specific Land Rover Discovery or Range Rover model before installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damage to the rubber bellows during installation\u003c\/li\u003e\n\u003cli\u003eCheck and replace mounting hardware if necessary, as it is not included\u003c\/li\u003e\n\u003cli\u003eInspect related suspension components for wear or damage during replacement\u003c\/li\u003e\n\u003cli\u003eFollow vehicle manufacturer torque specifications for mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott's NEW line of air suspension springs, including part number A-3025, is manufactured to meet or exceed OEM standards. While mounting hardware and additional components are not included, the air spring itself is built with quality rubber bellows and designed for durability. Warranty details should be confirmed with the distributor or installer, as Arnott typically offers limited warranties covering defects in materials and workmanship.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834228405,"sku":"DDWG-A-3025","price":241.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3025_Fro.jpg?v=1774702998"},{"product_id":"arnott-a-3233-air-suspension-spring","title":"Arnott A-3233 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3233\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3233 is designed specifically for Cadillac XTS models, providing reliable air suspension performance. Engineered with durable rubber bellows and a sleeve-style design, this air spring supports smooth ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Cadillac XTS suspension systems\u003c\/li\u003e\n\u003cli\u003eConstructed with black rubber bellows for durability\u003c\/li\u003e\n\u003cli\u003eSleeve-style air spring with 2.59 thickness bellows material\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003cli\u003eLower mount type features a base cup design\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3233 features a black rubber bellows constructed with a thickness of 2.59, ensuring flexibility and resistance to wear under normal driving conditions. The sleeve-style design enhances the spring's ability to absorb shocks and maintain ride height. This standard grade air spring is engineered without included mounting hardware, bearing plate, or boot, allowing for compatibility with existing suspension components. The lower mount utilizes a base cup type, providing secure attachment to the vehicle's suspension assembly. This part is specifically designed for Cadillac XTS models, ensuring proper fitment and function.\u003c\/p\u003e\u003ch2\u003eApplications and Common Suspension Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or leaking air suspension springs on Cadillac XTS\u003c\/li\u003e\n\u003cli\u003eRestores proper ride height and vehicle leveling\u003c\/li\u003e\n\u003cli\u003eImproves handling and ride comfort affected by damaged air springs\u003c\/li\u003e\n\u003cli\u003eAddresses air spring bellows cracks or punctures\u003c\/li\u003e\n\u003cli\u003eResolves suspension noise or instability caused by faulty springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Recommendations\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott NEW air suspension spring A-3233 requires removal of the old air spring and careful handling of the rubber bellows to avoid damage. Since mounting hardware, bearing plate, and boot are not included, ensure existing components are in good condition or replaced separately. Proper alignment of the base cup lower mount is essential for secure fitment. It is recommended to follow vehicle-specific service manuals for torque specifications and safety precautions during installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty Information\u003c\/h2\u003e\u003cp\u003eArnott's NEW product line focuses on delivering reliable replacement parts that meet OEM standards. The A-3233 air suspension spring undergoes quality control to ensure durability and performance for Cadillac XTS vehicles. While mounting hardware and additional components are not included, the air spring itself is manufactured to provide consistent air suspension support. Warranty details should be confirmed with the supplier or manufacturer, as coverage may vary.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834261173,"sku":"DDWG-A-3233","price":140.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3233_Fro_d1f0976f-80db-478d-ba4f-21e04923f753.jpg?v=1774702999"},{"product_id":"arnott-a-3306-air-suspension-spring","title":"Arnott A-3306 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3306\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3306 is engineered specifically for Porsche Panamera models, providing reliable air suspension performance. Designed with durable rubber bellows and standard grade materials, this air spring ensures consistent ride quality and vehicle stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Porsche Panamera vehicles\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for straightforward installation\u003c\/li\u003e\n\u003cli\u003eConstructed with black rubber bellows, 2.21 thickness\u003c\/li\u003e\n\u003cli\u003eSleeve style design with base cup lower mount\u003c\/li\u003e\n\u003cli\u003eStandard grade type for balanced durability and performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThis Arnott air suspension spring, part number A-3306, features a black rubber bellows with a thickness of 2.21, designed to withstand typical road conditions while maintaining flexibility. The sleeve style construction enhances durability and fitment accuracy. The lower mount utilizes a base cup type, ensuring secure attachment to the vehicle's suspension system. While the product does not include a bearing plate or boot, it comes complete with all necessary mounting hardware for installation.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated suspension components that meet OEM specifications for various vehicle models. This line emphasizes quality materials and precise engineering to maintain factory ride characteristics. The A-3306 air suspension spring is part of this line, offering a reliable replacement option for Porsche Panamera owners seeking to restore or maintain their vehicle's air suspension system.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle leveling on Porsche Panamera\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks causing suspension sag or uneven ride\u003c\/li\u003e\n\u003cli\u003eImproves handling and comfort by maintaining correct air pressure\u003c\/li\u003e\n\u003cli\u003eAddresses suspension noise related to damaged bellows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-3306 air suspension spring requires basic suspension knowledge and appropriate tools. The included mounting hardware simplifies the process, but care should be taken to avoid damage to the rubber bellows during installation. It is recommended to inspect related suspension components and replace any worn parts to ensure optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs are manufactured to meet or exceed OEM standards. The A-3306 part undergoes rigorous quality control to ensure durability and fitment accuracy. This product includes mounting hardware and is backed by Arnott's standard warranty coverage, providing confidence in its reliability for Porsche Panamera applications.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834293941,"sku":"DDWG-A-3306","price":565.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3306_Fro_c9e5b0a5-88a1-45c4-9e16-5afb15f55217.jpg?v=1774702999"},{"product_id":"arnott-a-3307-air-suspension-spring","title":"Arnott A-3307 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3307\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3307 is designed specifically for Volvo V90 Cross Country, XC60, and XC90 models. This air suspension spring offers reliable performance with quality materials and includes essential mounting hardware for straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Volvo V90 Cross Country, XC60, and XC90\u003c\/li\u003e\n\u003cli\u003ePart number A-3307 for precise identification\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.21 thickness\u003c\/li\u003e\n\u003cli\u003eStandard grade convoluted bellows design\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware; excludes bearing plate and boot\u003c\/li\u003e\n\u003cli\u003eLower mount type features a base cup design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3307 features a black rubber bellows constructed with a 2.21 thickness, providing durability and flexibility required for effective suspension performance. The convoluted bellows design helps absorb road shocks and maintain ride height consistency. This standard grade air spring is engineered without a bearing plate or boot, focusing on essential components for reliable function. The lower mount uses a base cup type, ensuring secure attachment to the vehicle’s suspension system. Mounting hardware is included to facilitate proper installation.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott represents a current series of suspension components designed to meet OEM specifications. This line emphasizes quality materials and fitment accuracy, ensuring compatibility with specific vehicle models such as the Volvo V90 Cross Country, XC60, and XC90. The A-3307 air suspension spring is part of this line, reflecting Arnott’s commitment to providing dependable replacement parts for air suspension systems.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle stance on Volvo V90 Cross Country, XC60, and XC90\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs causing uneven or rough ride quality\u003c\/li\u003e\n\u003cli\u003eAddresses air leaks or bellows failure in the suspension system\u003c\/li\u003e\n\u003cli\u003eImproves suspension responsiveness and load handling\u003c\/li\u003e\n\u003cli\u003eEliminates suspension sagging or bottoming out issues\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is safely lifted and supported before removing old air spring\u003c\/li\u003e\n\u003cli\u003eUse included mounting hardware for secure and correct installation\u003c\/li\u003e\n\u003cli\u003eCheck for any damage to surrounding suspension components during replacement\u003c\/li\u003e\n\u003cli\u003eVerify air line connections are properly sealed to prevent leaks\u003c\/li\u003e\n\u003cli\u003eFollow vehicle-specific service manual instructions for torque specifications and procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3307 is manufactured to meet or exceed OEM standards for durability and performance. The product includes mounting hardware to support proper installation. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. It is recommended to consult the product documentation or Arnott directly for warranty terms related to this part.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834326709,"sku":"DDWG-A-3307","price":408.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3307_Fro_6ccb374f-3702-4086-9963-42068e7a8d51.jpg?v=1774702999"},{"product_id":"arnott-a-3313-air-suspension-spring","title":"Arnott A-3313 Air Suspension Spring - Rear Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3313\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3313 is engineered for select Mercedes-Benz models, including AMG GT series and GLC variants. Designed to restore proper ride height and improve suspension performance, this air spring features durable rubber bellows and a base cup lower mount for reliable operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz AMG GT 43, AMG GT 53, AMG GT 63, AMG GT 63 S E Performance, AMG GT 63 S, CLS450, E200, E300, E350, E350e, E450, E53 AMG, E63 AMG S, GLC300, GLC300e, GLC43 AMG, E63 AMG, GLC63 AMG, GLC63 AMG S, E43 AMG, GLC350e, E250, E400, and GLC250\u003c\/li\u003e\n\u003cli\u003ePart number A-3313 from Arnott's NEW product line\u003c\/li\u003e\n\u003cli\u003eStandard grade rubber bellows with 3mm thickness in black color\u003c\/li\u003e\n\u003cli\u003eConvoluted bellows design for consistent air suspension performance\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup for secure installation\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eArnott NEW Product Line Details\u003c\/h2\u003e\u003cp\u003eThe NEW product line by Arnott focuses on delivering reliable air suspension components that meet OEM specifications. The A-3313 air suspension spring is part of this line, offering standard grade materials and construction designed to maintain the original suspension characteristics of compatible Mercedes-Benz vehicles.\u003c\/p\u003e\u003ch2\u003eProduct Features and Specifications\u003c\/h2\u003e\u003cp\u003eThis air suspension spring utilizes black rubber bellows with a 3mm thickness, providing flexibility and durability under varying load conditions. The convoluted bellows design helps maintain consistent air pressure and ride height. The base cup lower mount ensures a secure fitment to the vehicle’s suspension system. Note that this part does not include mounting hardware, bearing plate, or boot, so these components must be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Mercedes-Benz AMG GT 63 and GLC63 AMG models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs causing uneven ride or sagging\u003c\/li\u003e\n\u003cli\u003eImproves suspension response and vehicle stability\u003c\/li\u003e\n\u003cli\u003eAddresses air spring failures that lead to compressor overwork\u003c\/li\u003e\n\u003cli\u003eEliminates noise or roughness caused by damaged bellows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is safely supported before removing old air suspension spring\u003c\/li\u003e\n\u003cli\u003eCheck compatibility with specific Mercedes-Benz model and year before installation\u003c\/li\u003e\n\u003cli\u003eUse appropriate tools to avoid damage to the rubber bellows during installation\u003c\/li\u003e\n\u003cli\u003eSince mounting hardware is not included, verify existing hardware condition or acquire replacements\u003c\/li\u003e\n\u003cli\u003eInspect related suspension components such as compressors and valves for optimal system performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3313 is manufactured to meet standard grade quality requirements. While mounting hardware and additional components are not included, the bellows material and design conform to OEM standards for durability and performance. Warranty details should be confirmed with the point of purchase or Arnott directly.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834359477,"sku":"DDWG-A-3313","price":456.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3313_Ang_956e1315-fe42-4073-8a99-2a9bdb718df1.jpg?v=1774703000"},{"product_id":"arnott-a-3331-air-suspension-spring","title":"Arnott A-3331 Air Suspension Spring - Rear Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3331\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3331 is designed specifically for Lexus GX460 models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes mounting hardware for straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus GX460\u003c\/li\u003e\n\u003cli\u003ePart number A-3331\u003c\/li\u003e\n\u003cli\u003eRubber bellows material with 2.69 thickness\u003c\/li\u003e\n\u003cli\u003eStandard grade type with convoluted bellows design\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and one mounting stud\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eBlack bellows color for durability and appearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3331 is engineered with a rubber bellows material that measures 2.69 in thickness, ensuring flexibility and durability under various driving conditions. The convoluted bellows design enhances the spring's ability to absorb shocks and maintain ride height. This standard grade air spring includes one mounting stud and comes with all necessary mounting hardware for a complete replacement. The lower mount type is a base cup, which provides a secure and stable connection to the vehicle's suspension system. The bellows are finished in black, offering resistance to wear and environmental factors. Note that this part does not include a bearing plate or boot.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components tailored to specific vehicle applications. This line emphasizes quality materials and precise fitment, as demonstrated by the A-3331 air suspension spring designed for the Lexus GX460. The NEW line ensures compatibility and performance aligned with original equipment standards.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and suspension performance on Lexus GX460\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs causing uneven ride\u003c\/li\u003e\n\u003cli\u003eAddresses air leaks or bellows failure in the suspension system\u003c\/li\u003e\n\u003cli\u003eImproves vehicle stability and handling affected by faulty air springs\u003c\/li\u003e\n\u003cli\u003eEliminates suspension noise related to deteriorated air springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-3331 air suspension spring requires basic suspension knowledge and tools. The included mounting hardware simplifies the replacement process. Ensure the vehicle is safely lifted and supported before removing the old air spring. Verify the mounting stud and base cup align correctly with the vehicle’s suspension components. It is recommended to inspect related suspension parts during installation for wear or damage.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-3331, are manufactured to meet or exceed OEM specifications. The use of high-quality rubber bellows and precise construction supports long-term durability. This product includes mounting hardware to ensure a complete and secure fit. Warranty details are provided by Arnott and typically cover defects in materials and workmanship under normal use.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834457781,"sku":"DDWG-A-3331","price":421.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3331_Fro_2c4f8586-3240-4ca5-8992-d455d1b4ed8f.jpg?v=1774703001"},{"product_id":"arnott-a-3332-air-suspension-spring","title":"Arnott A-3332 Air Suspension Spring - Rear Left","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3332\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3332 is designed specifically for Lexus GX460 models, providing reliable air suspension performance. This air spring features durable rubber bellows and includes mounting hardware for straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Lexus GX460\u003c\/li\u003e\n\u003cli\u003ePart number A-3332\u003c\/li\u003e\n\u003cli\u003eRubber bellows material with 2.69 thickness\u003c\/li\u003e\n\u003cli\u003eStandard grade type with convoluted bellows design\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and one mounting stud\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup\u003c\/li\u003e\n\u003cli\u003eBlack bellows color for durability and appearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3332 is engineered with a convoluted rubber bellows that measures 2.69 in thickness, ensuring flexibility and strength under load. The black bellows are designed to withstand typical wear and environmental factors. This air spring includes one mounting stud and comes with all necessary mounting hardware, simplifying the replacement process. The lower mount uses a base cup design, which is compatible with the Lexus GX460 suspension system. Notably, this part does not include a bearing plate or boot, focusing on essential components for air spring functionality.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott represents the latest generation of suspension components designed to meet OEM specifications. This line emphasizes quality materials and precise fitment, such as the A-3332 air suspension spring tailored for Lexus GX460 vehicles. The NEW series aims to provide reliable suspension solutions with standard grade components and proven designs like the convoluted rubber bellows used in this part.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height and vehicle stability on Lexus GX460\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs\u003c\/li\u003e\n\u003cli\u003eAddresses uneven or sagging suspension issues\u003c\/li\u003e\n\u003cli\u003eImproves load handling and ride comfort\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks caused by damaged bellows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eInstallation of the Arnott A-3332 air suspension spring requires basic suspension knowledge and tools. Since mounting hardware is included, ensure all components are securely fastened to prevent air leaks. Verify the lower mount base cup aligns correctly with the vehicle’s suspension assembly. It is recommended to inspect related suspension parts during installation for wear or damage. Proper inflation and leak testing after installation will help maintain optimal suspension performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-3332, are manufactured to meet or exceed OEM standards. The use of high-quality rubber bellows and standard grade materials ensures durability and consistent performance. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. Buyers should consult product documentation or the manufacturer for exact warranty terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834490549,"sku":"DDWG-A-3332","price":421.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3332_Fro.jpg?v=1774703001"},{"product_id":"arnott-a-3753-air-suspension-spring","title":"Arnott A-3753 Air Suspension Spring - Rear","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3753\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3753 is designed specifically for the Hummer H2, providing reliable air suspension performance. This air spring features a durable rubber bellows and a sleeve-style design to maintain proper ride height and comfort.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Hummer H2 models\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows material\u003c\/li\u003e\n\u003cli\u003eSleeve-style air spring construction\u003c\/li\u003e\n\u003cli\u003eStandard grade type for consistent performance\u003c\/li\u003e\n\u003cli\u003eLower mount type features a base cup design\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3753 is engineered to meet the suspension needs of the Hummer H2. It utilizes a black rubber bellows that offers flexibility and durability under various driving conditions. The sleeve-style design ensures a secure fit and proper air containment, while the base cup lower mount type provides stable attachment to the vehicle’s suspension system. This standard grade air spring is built to maintain the vehicle’s ride height and absorb road shocks effectively. Note that this part does not include mounting hardware, bearing plate, or boot, so these components must be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and reliable suspension components tailored for specific vehicle applications. The A-3753 air suspension spring is part of this line, offering a balance of quality materials and design suited for the Hummer H2’s suspension system. This line emphasizes compatibility and durability without including additional mounting accessories, allowing for flexible installation options.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Hummer H2 vehicles\u003c\/li\u003e\n\u003cli\u003eReplaces worn or damaged air suspension springs\u003c\/li\u003e\n\u003cli\u003eImproves ride comfort and handling stability\u003c\/li\u003e\n\u003cli\u003eAddresses air leaks or bellows deterioration\u003c\/li\u003e\n\u003cli\u003eSupports suspension system integrity during load changes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible specifically with Hummer H2 models; verify vehicle fitment before installation\u003c\/li\u003e\n\u003cli\u003eMounting hardware, bearing plate, and boot are not included and must be obtained separately\u003c\/li\u003e\n\u003cli\u003eInspect surrounding suspension components during replacement for wear or damage\u003c\/li\u003e\n\u003cli\u003eEnsure proper torque specifications are followed for mounting the base cup lower mount\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to maintain suspension system performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3753 is manufactured to meet standard grade specifications, ensuring consistent performance and durability. While mounting hardware and additional components are not included, the core air spring is built with quality rubber bellows designed for longevity. Warranty details should be confirmed with the supplier or manufacturer, as they may vary based on purchase location.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834556085,"sku":"DDWG-A-3753","price":190.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3753_Ang_489ceb08-a628-4d57-9d8d-a7c4a327dbdb.jpg?v=1774703001"},{"product_id":"arnott-a-3891-air-suspension-spring","title":"Arnott A-3891 Air Suspension Spring - Rear Right","description":"\u003ch2\u003eOverview of Arnott NEW Air Suspension Spring A-3891\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW Air Suspension Spring A-3891 is engineered for precise fitment on select Audi models, including the A6, A6 Quattro, RS7, S6, and S7. Designed to restore factory ride height and improve suspension performance, this air spring is a reliable replacement part for maintaining vehicle stability and comfort.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Audi A6, A6 Quattro, RS7, S6, and S7 models\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware for straightforward installation\u003c\/li\u003e\n\u003cli\u003eDurable black rubber bellows with 2.21 thickness for longevity\u003c\/li\u003e\n\u003cli\u003eStandard grade convoluted bellows design for consistent air suspension support\u003c\/li\u003e\n\u003cli\u003eLower mount type: base cup; upper mount type: stud\u003c\/li\u003e\n\u003cli\u003eDoes not include bearing plate or boot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe Arnott NEW air suspension spring A-3891 features a black rubber bellows constructed with a thickness of 2.21, providing durability and resistance to wear. The convoluted bellows design ensures flexible and reliable air support under varying load conditions. This air spring comes with mounting hardware included, simplifying the replacement process. The lower mount utilizes a base cup design, while the upper mount is a stud type, matching the original equipment specifications for the compatible Audi models. Note that this part does not include a bearing plate or boot, which may need to be sourced separately if required.\u003c\/p\u003e\u003ch2\u003eAbout the Arnott NEW Product Line\u003c\/h2\u003e\u003cp\u003eThe NEW product line from Arnott focuses on delivering updated and precise replacement components for air suspension systems. This line emphasizes compatibility and quality, ensuring that parts like the A-3891 air suspension spring meet or exceed OEM standards for fit and function. The NEW line is designed to provide technicians and vehicle owners with reliable options for maintaining suspension performance on luxury vehicles such as Audi.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Resolution\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores proper ride height on Audi A6, A6 Quattro, RS7, S6, and S7 models\u003c\/li\u003e\n\u003cli\u003eReplaces worn or leaking air suspension springs\u003c\/li\u003e\n\u003cli\u003eImproves vehicle stability and handling affected by faulty air springs\u003c\/li\u003e\n\u003cli\u003eAddresses uneven suspension or sagging caused by damaged bellows\u003c\/li\u003e\n\u003cli\u003eEliminates air leaks that lead to compressor overuse and failure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure vehicle is safely supported before removing the old air spring\u003c\/li\u003e\n\u003cli\u003eUse the included mounting hardware for secure and proper installation\u003c\/li\u003e\n\u003cli\u003eVerify the lower base cup and upper stud mounts align correctly with vehicle suspension points\u003c\/li\u003e\n\u003cli\u003eInspect surrounding suspension components for wear during installation\u003c\/li\u003e\n\u003cli\u003eCheck for air leaks after installation to confirm proper sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eArnott air suspension springs, including the A-3891, are manufactured to meet strict quality standards. The use of durable rubber bellows and precise mounting hardware ensures long service life. While specific warranty details are not provided here, Arnott typically offers coverage against defects in materials and workmanship. It is recommended to consult the product documentation or supplier for exact warranty terms.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":43384834621621,"sku":"DDWG-A-3891","price":366.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/AI_A3891_Fro_9b1563e7-5ad7-4321-96d3-22cd237c22f9.jpg?v=1774703002"}],"url":"https:\/\/www.partcatalog.com\/collections\/suspension-springs-and-related-components-3.oembed?page=4","provider":"PartCatalog","version":"1.0","type":"link"}