{"product_id":"centric-121-40010-disc-brake-rotor","title":"Centric 121.40010 Disc Brake Rotor - Rear","description":"\u003ch2\u003eOverview of Centric C-TEK Standard Disc Brake Rotor 121.40010\u003c\/h2\u003e\u003cp\u003eThe Centric C-TEK Standard Disc Brake Rotor 121.40010 is engineered for reliable braking performance on Honda Prelude models. Designed as a solid rotor with a smooth surface, this part ensures consistent stopping power and durability for your vehicle's braking system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Honda Prelude vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 121.40010 for precise identification\u003c\/li\u003e\n\u003cli\u003eSolid disc brake rotor with smooth surface finish\u003c\/li\u003e\n\u003cli\u003eOutside diameter of 9.409 inches (239 mm)\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 0.394 inches (10 mm) and discard thickness of 0.315 inches (8 mm)\u003c\/li\u003e\n\u003cli\u003eOverall height of 2.835 inches (72 mm)\u003c\/li\u003e\n\u003cli\u003eFour stud\/lug holes with 3.937 inch (100 mm) bolt hole circle diameter\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 2.205 inches (56 mm)\u003c\/li\u003e\n\u003cli\u003eDoes not include ABS tone ring or bearings\u003c\/li\u003e\n\u003cli\u003eWeight approximately 10 lbs (4.55 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on C-TEK Standard Disc Brake Rotors\u003c\/h2\u003e\u003cp\u003eThe C-TEK Standard Disc Brake Rotors line by Centric offers a balance of quality and value for standard braking applications. This product line focuses on providing rotors that meet OEM specifications for fit and function without additional features like venting or ABS tone rings. The 121.40010 rotor is a solid type, designed to maintain consistent thickness and surface integrity, which is critical for smooth braking and rotor longevity on Honda Prelude vehicles.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor features a nominal thickness of 0.394 inches (10 mm) and a discard thickness of 0.315 inches (8 mm), indicating the minimum thickness before replacement is necessary. The rotor’s outside diameter measures 9.409 inches (239 mm), and it has an overall height of 2.835 inches (72 mm). It mounts using four lug holes arranged on a 3.937 inch (100 mm) bolt circle diameter, with a center hole diameter of 2.205 inches (56 mm). The rotor is solid rather than vented, which suits vehicles with standard braking demands. Note that this rotor does not include an ABS tone ring or bearings, so those components must be sourced separately if required.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Honda Prelude models\u003c\/li\u003e\n\u003cli\u003eAddresses brake pulsation caused by uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003eRestores proper rotor thickness to maintain braking efficiency\u003c\/li\u003e\n\u003cli\u003eEliminates noise and vibration from damaged or scored rotors\u003c\/li\u003e\n\u003cli\u003eSupports safe stopping performance under normal driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure rotor thickness is measured before installation to confirm discard limits\u003c\/li\u003e\n\u003cli\u003eClean rotor surface to remove any protective coatings or debris\u003c\/li\u003e\n\u003cli\u003eVerify bolt hole alignment and torque specifications for secure mounting\u003c\/li\u003e\n\u003cli\u003eCheck compatibility with existing brake pads and hardware\u003c\/li\u003e\n\u003cli\u003eInspect related components such as bearings and seals for wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eCentric manufactures the C-TEK Standard Disc Brake Rotors to meet or exceed OEM standards for fit, form, and function. While specific warranty details for part number 121.40010 are not provided here, Centric typically offers coverage against defects in materials and workmanship. Users should consult product documentation or Centric directly for warranty terms applicable to this rotor.\u003c\/p\u003e","brand":"Centric","offers":[{"title":"Default Title","offer_id":44567983816885,"sku":"BKNJ-121.40010","price":31.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/CE_12140010_Fro.jpg?v=1774638441","url":"https:\/\/www.partcatalog.com\/products\/centric-121-40010-disc-brake-rotor","provider":"PartCatalog","version":"1.0","type":"link"}