{"product_id":"centric-121-42026-disc-brake-rotor","title":"Centric 121.42026 Disc Brake Rotor - Rear","description":"\u003ch2\u003eOverview of Centric C-TEK Standard Disc Brake Rotor 121.42026\u003c\/h2\u003e\u003cp\u003eThe Centric C-TEK Standard Disc Brake Rotor 121.42026 is engineered for reliable braking performance on Nissan 200SX and 300ZX models. Designed as a solid rotor with a smooth surface, it offers consistent stopping power and durability for these specific vehicles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan 200SX and 300ZX\u003c\/li\u003e\n\u003cli\u003ePart number: 121.42026\u003c\/li\u003e\n\u003cli\u003eSolid disc brake rotor with smooth surface finish\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 11.417 inches (290 mm)\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 0.394 inches (10.000 mm)\u003c\/li\u003e\n\u003cli\u003eDiscard thickness: 0.354 inches (9.000 mm)\u003c\/li\u003e\n\u003cli\u003eOverall height: 1.850 inches (47.000 mm)\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter: 2.681 inches (68.100 mm)\u003c\/li\u003e\n\u003cli\u003eMounting bolt hole circle diameter: 4.500 inches (114.300 mm)\u003c\/li\u003e\n\u003cli\u003e5 stud\/lug holes, each 0.502 inches (12.750 mm) in diameter\u003c\/li\u003e\n\u003cli\u003eFloating disc mounting with 2 miscellaneous holes\u003c\/li\u003e\n\u003cli\u003eWeight approximately 10.75 lbs (4.89 kgs)\u003c\/li\u003e\n\u003cli\u003eABS tone ring and bearings not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the C-TEK Standard Disc Brake Rotors Line\u003c\/h2\u003e\u003cp\u003eThe C-TEK Standard Disc Brake Rotors line by Centric offers OEM-quality replacement rotors designed to meet factory specifications. This product line focuses on providing solid rotors with smooth surfaces that ensure consistent brake pad contact and reliable performance. The 121.42026 rotor fits within this line, delivering precise fitment and dependable braking for Nissan 200SX and 300ZX vehicles.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Centric disc brake rotor features a solid design with a smooth surface type, optimized for even pad wear and effective heat dissipation. The rotor’s nominal thickness of 0.394 inches (10.000 mm) and discard thickness of 0.354 inches (9.000 mm) define its usable lifespan before replacement is necessary. With an outside diameter of 11.417 inches (290 mm) and an overall height of 1.850 inches (47 mm), it matches the exact dimensions required for proper installation on Nissan 200SX and 300ZX models. The rotor mounts using a floating disc mounting system with a 5-lug pattern and a bolt hole circle diameter of 4.500 inches (114.300 mm), ensuring secure attachment and alignment. Note that this rotor does not include an ABS tone ring or bearings, so those components must be sourced separately if needed.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Nissan 200SX and 300ZX\u003c\/li\u003e\n\u003cli\u003eRestores braking performance affected by rotor thickness below discard limits\u003c\/li\u003e\n\u003cli\u003eEliminates brake pulsation caused by uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003eAddresses noise and vibration issues related to rotor damage\u003c\/li\u003e\n\u003cli\u003eSupports safe and consistent stopping power for daily driving and light performance use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify rotor thickness before installation to ensure it meets minimum discard thickness\u003c\/li\u003e\n\u003cli\u003eClean rotor surface to remove any protective coatings or debris prior to mounting\u003c\/li\u003e\n\u003cli\u003eUse proper torque specifications for lug nuts to avoid rotor warping\u003c\/li\u003e\n\u003cli\u003eInspect brake pads and replace if worn to maintain optimal braking performance\u003c\/li\u003e\n\u003cli\u003eCheck compatibility with vehicle ABS system since this rotor does not include an ABS tone ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eCentric manufactures the C-TEK Standard Disc Brake Rotors to meet or exceed OEM standards for fit, form, and function. Each rotor undergoes strict quality control to ensure dimensional accuracy and material integrity. While specific warranty details are not provided here, Centric typically offers limited warranties covering defects in materials and workmanship. It is recommended to consult product documentation or Centric directly for exact warranty terms related to part number 121.42026.\u003c\/p\u003e","brand":"Centric","offers":[{"title":"Default Title","offer_id":44567995744437,"sku":"BKNJ-121.42026","price":39.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/CE_12142026_Fro.jpg?v=1774638469","url":"https:\/\/www.partcatalog.com\/products\/centric-121-42026-disc-brake-rotor","provider":"PartCatalog","version":"1.0","type":"link"}