{"product_id":"centric-121-43017-disc-brake-rotor-front","title":"Centric 121.43017 Disc Brake Rotor - Front","description":"\u003ch2\u003eReliable Performance with Centric C-TEK Standard Disc Brake Rotors\u003c\/h2\u003e\u003cp\u003eThe Centric C-TEK Standard Disc Brake Rotor 121.43017 offers dependable braking performance designed for vehicles requiring vented rotors with precise fitment. Engineered to meet OEM specifications, this rotor ensures consistent stopping power and durability for various automotive applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 121.43017\u003c\/li\u003e\n\u003cli\u003eVented disc brake rotor with straight vane design for effective heat dissipation\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 12.205 inches (310 mm) and overall height of 2.185 inches (55.5 mm)\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 1.654 inches (42 mm) with discard thickness at 1.535 inches (39 mm)\u003c\/li\u003e\n\u003cli\u003e12 mounting bolt holes with a bolt hole circle diameter of 5.354 inches (136 mm)\u003c\/li\u003e\n\u003cli\u003eSmooth surface type for consistent pad contact\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 4.331 inches (110 mm)\u003c\/li\u003e\n\u003cli\u003eWeight approximately 27 lbs (12.27 kgs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the C-TEK Standard Disc Brake Rotors Line\u003c\/h2\u003e\u003cp\u003eThe C-TEK Standard Disc Brake Rotors line by Centric is designed to provide reliable, OEM-quality replacement rotors that meet or exceed factory specifications. This product line focuses on standard vented rotors with smooth surfaces and straight vane designs to ensure proper heat dissipation and braking performance. The 121.43017 rotor is part of this line, offering a balance of durability and fitment accuracy for vehicles requiring 12-bolt mounting and vented rotor construction.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis vented disc brake rotor features a straight vane design that promotes efficient airflow to reduce heat buildup during braking. The rotor’s nominal thickness of 1.654 inches (42 mm) and discard thickness of 1.535 inches (39 mm) provide a clear service limit to maintain safe braking performance. With a smooth surface type, the rotor ensures even pad wear and consistent braking feel. The 12 mounting bolt holes with a 5.354-inch (136 mm) bolt circle diameter and 0.480-inch (12.2 mm) bolt hole diameter allow for secure attachment behind the hub, matching specific vehicle requirements.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors causing brake pulsation or noise\u003c\/li\u003e\n\u003cli\u003eUpgrading from solid to vented rotors for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eAddressing rotor thickness below manufacturer discard limits\u003c\/li\u003e\n\u003cli\u003eResolving uneven brake pad wear due to rotor surface imperfections\u003c\/li\u003e\n\u003cli\u003eEnsuring proper fitment for vehicles requiring 12-bolt mounting rotors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor is installed behind the hub as specified for proper alignment. Verify the mounting bolt hole pattern and center hole diameter match the vehicle’s hub assembly. Clean the rotor surface before installation to remove any protective coatings or contaminants. Use a calibrated torque wrench to tighten mounting bolts to manufacturer specifications to avoid rotor warping. This rotor does not include bearings or ABS tone rings, so verify compatibility with your vehicle’s braking system.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eCentric C-TEK Standard Disc Brake Rotors are manufactured to meet or exceed OEM standards for material quality and dimensional accuracy. Each rotor undergoes rigorous quality control to ensure consistent performance and durability. While specific warranty details are not provided here, Centric typically offers limited warranties covering defects in materials and workmanship. Consult product documentation or Centric directly for warranty terms related to part number 121.43017.\u003c\/p\u003e","brand":"Centric","offers":[{"title":"Default Title","offer_id":51720376615093,"sku":"BKNJ-121.43017","price":85.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/CE_12143017_Fro.jpg?v=1774638500","url":"https:\/\/www.partcatalog.com\/products\/centric-121-43017-disc-brake-rotor-front","provider":"PartCatalog","version":"1.0","type":"link"}