{"product_id":"centric-121-46067-disc-brake-rotor","title":"Centric 121.46067 Disc Brake Rotor - Rear","description":"\u003ch2\u003eOverview of Centric C-TEK Standard Disc Brake Rotor 121.46067\u003c\/h2\u003e\u003cp\u003eThe Centric C-TEK Standard Disc Brake Rotor 121.46067 is engineered for reliable braking performance on Mitsubishi Endeavor and Grandis models. Designed as a solid rotor with a smooth surface, it offers consistent stopping power and durability for everyday driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mitsubishi Endeavor and Grandis\u003c\/li\u003e\n\u003cli\u003eSolid disc brake rotor with smooth surface finish\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 11.890 inches (302.000 mm)\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 0.398 inches (10.120 mm)\u003c\/li\u003e\n\u003cli\u003eDiscard thickness: 0.331 inches (8.400 mm)\u003c\/li\u003e\n\u003cli\u003eOverall height: 2.311 inches (58.700 mm)\u003c\/li\u003e\n\u003cli\u003e5 lug holes with 4.500 inch (114.300 mm) bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter: 2.717 inches (69.000 mm)\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.5 lbs (5.68 kgs)\u003c\/li\u003e\n\u003cli\u003eABS tone ring not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the C-TEK Standard Disc Brake Rotors Line\u003c\/h2\u003e\u003cp\u003eThe C-TEK Standard Disc Brake Rotors line by Centric offers a range of rotors designed to meet OEM specifications for standard braking applications. This product line focuses on solid rotors with smooth surfaces, providing dependable performance and fitment for vehicles like the Mitsubishi Endeavor and Grandis. These rotors are engineered to maintain proper thickness and dimensions to ensure safe and effective braking without the need for additional features such as venting or ABS tone rings.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThe Centric part number 121.46067 is a solid disc brake rotor specifically designed for Mitsubishi Endeavor and Grandis models. It features a smooth surface type that promotes even pad wear and consistent braking response. The rotor measures 11.890 inches in outside diameter and has a nominal thickness of 0.398 inches, with a discard thickness of 0.331 inches, ensuring it meets safety standards for replacement. The overall height of 2.311 inches and a 5-lug hole pattern with a 4.500 inch bolt circle diameter provide precise fitment. This rotor does not include an ABS tone ring or bearings, making it suitable for vehicles without ABS sensor integration on the rotor itself.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Issues Addressed\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors causing brake pulsation\u003c\/li\u003e\n\u003cli\u003eRestores braking performance on Mitsubishi Endeavor and Grandis\u003c\/li\u003e\n\u003cli\u003eEliminates noise and vibration from uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003eAddresses rotor thickness below manufacturer discard limits\u003c\/li\u003e\n\u003cli\u003eImproves overall brake system reliability and safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure rotor thickness is above discard thickness before installation\u003c\/li\u003e\n\u003cli\u003eClean rotor surface to remove any protective coating before mounting\u003c\/li\u003e\n\u003cli\u003eCheck compatibility with existing brake pads and calipers\u003c\/li\u003e\n\u003cli\u003eTorque lug nuts to manufacturer specifications for proper fitment\u003c\/li\u003e\n\u003cli\u003eInspect wheel bearings and replace if necessary, as bearings are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eCentric C-TEK Standard Disc Brake Rotors are manufactured to meet or exceed OEM standards for fit, form, and function. While specific warranty details are not provided here, Centric typically offers coverage against defects in materials and workmanship. Using part number 121.46067 ensures you receive a rotor designed for precise fitment and reliable braking on Mitsubishi Endeavor and Grandis vehicles.\u003c\/p\u003e","brand":"Centric","offers":[{"title":"Default Title","offer_id":44568086741173,"sku":"BKNJ-121.46067","price":44.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/CE_12146067_Fro.jpg?v=1774638589","url":"https:\/\/www.partcatalog.com\/products\/centric-121-46067-disc-brake-rotor","provider":"PartCatalog","version":"1.0","type":"link"}