{"product_id":"centric-121-51006-disc-brake-rotor","title":"Centric 121.51006 Disc Brake Rotor - Rear","description":"\u003ch2\u003eOverview of Centric C-TEK Standard Disc Brake Rotor 121.51006\u003c\/h2\u003e\u003cp\u003eThe Centric C-TEK Standard Disc Brake Rotor 121.51006 is engineered for reliable braking performance on Hyundai Elantra and Tiburon models. Designed as a solid rotor with a smooth surface, it provides consistent stopping power and durability for everyday driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Hyundai Elantra and Tiburon vehicles\u003c\/li\u003e\n\u003cli\u003eSolid disc brake rotor with smooth surface finish\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 10.146 inches (257.7 mm)\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 0.394 inches (10.0 mm)\u003c\/li\u003e\n\u003cli\u003eDiscard thickness: 0.315 inches (8.0 mm)\u003c\/li\u003e\n\u003cli\u003eOverall height: 1.591 inches (40.4 mm)\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter: 2.996 inches (76.1 mm)\u003c\/li\u003e\n\u003cli\u003eMounting bolt hole circle diameter: 4.5 inches (114.3 mm)\u003c\/li\u003e\n\u003cli\u003eFour stud\/lug holes, each 0.492 inches (12.5 mm) in diameter\u003c\/li\u003e\n\u003cli\u003eFloating disc mounting with two miscellaneous holes\u003c\/li\u003e\n\u003cli\u003eWeight approximately 8 lbs (3.64 kgs)\u003c\/li\u003e\n\u003cli\u003eABS tone ring and bearings not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: C-TEK Standard Disc Brake Rotors\u003c\/h2\u003e\u003cp\u003eThe C-TEK Standard Disc Brake Rotors line by Centric offers a balance of quality and value for standard braking applications. These rotors are designed to meet or exceed OEM specifications, providing dependable performance without additional features such as venting or ABS tone rings. The 121.51006 rotor is a solid type, suitable for vehicles requiring a straightforward replacement part that maintains factory fit and function.\u003c\/p\u003e\u003ch2\u003eTechnical Description and Specifications\u003c\/h2\u003e\u003cp\u003eThis Centric disc brake rotor features a solid construction with a smooth surface type, optimized for consistent pad contact and braking efficiency. The rotor’s nominal thickness of 0.394 inches (10.0 mm) ensures adequate material for wear, with a discard thickness of 0.315 inches (8.0 mm) indicating the minimum safe thickness before replacement is necessary. The overall height of 1.591 inches (40.4 mm) and outside diameter of 10.146 inches (257.7 mm) align with Hyundai Elantra and Tiburon factory specifications. The rotor mounts via a floating disc mounting system with a 4.5-inch (114.3 mm) bolt circle diameter and four lug holes, each 0.492 inches (12.5 mm) in diameter, ensuring secure fitment. The center hole diameter of 2.996 inches (76.1 mm) matches hub dimensions for proper alignment.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Hyundai Elantra and Tiburon\u003c\/li\u003e\n\u003cli\u003eAddresses brake pulsation caused by uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003eRestores proper rotor thickness to maintain braking performance\u003c\/li\u003e\n\u003cli\u003eEliminates noise and vibration from damaged or scored rotors\u003c\/li\u003e\n\u003cli\u003eEnsures safe and consistent stopping power under normal driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify rotor dimensions and fitment with vehicle specifications before installation\u003c\/li\u003e\n\u003cli\u003eEnsure hub surface is clean and free of rust to prevent rotor runout\u003c\/li\u003e\n\u003cli\u003eTorque lug nuts to manufacturer’s recommended specifications\u003c\/li\u003e\n\u003cli\u003eReplace brake pads when installing new rotors for optimal performance\u003c\/li\u003e\n\u003cli\u003eCheck rotor thickness with a micrometer to confirm discard limits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eCentric C-TEK Standard Disc Brake Rotors are manufactured to meet OEM standards for fit, form, and function. While specific warranty details for part number 121.51006 are not provided here, Centric typically offers limited warranties covering defects in materials and workmanship. Users should consult product documentation or Centric directly for warranty terms applicable to this rotor.\u003c\/p\u003e","brand":"Centric","offers":[{"title":"Default Title","offer_id":44568112496821,"sku":"BKNJ-121.51006","price":33.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/CE_12151006_Fro.jpg?v=1774638622","url":"https:\/\/www.partcatalog.com\/products\/centric-121-51006-disc-brake-rotor","provider":"PartCatalog","version":"1.0","type":"link"}