{"product_id":"centric-320-80001f-disc-brake-rotor-front-or-rear","title":"Centric 320.80001F Disc Brake Rotor - Front or Rear","description":"\u003ch2\u003eOverview of Centric GCX Elemental Protection Disc Brake Rotors\u003c\/h2\u003e\u003cp\u003eThe Centric GCX Elemental Protection Disc Brake Rotors - Full Coating (part number 320.80001F) offer a fully coated, vented rotor solution designed to provide reliable braking performance. Engineered with a smooth disc surface and coated hat finish, these rotors are built to resist corrosion and extend service life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFully coated disc and hat for enhanced corrosion resistance\u003c\/li\u003e\n\u003cli\u003eVented rotor design with straight vanes for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 1.437 inches (36.5 mm) with discard thickness at 1.320 inches (33.53 mm)\u003c\/li\u003e\n\u003cli\u003eOverall height of 3.402 inches (86.4 mm) and outside diameter of 15.370 inches (390.4 mm)\u003c\/li\u003e\n\u003cli\u003e10 mounting bolt holes with a bolt circle diameter of 7.252 inches (184.2 mm)\u003c\/li\u003e\n\u003cli\u003eHat shaped and tapped for ABS tone ring compatibility (ABS tone ring not included)\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 6.000 inches (152.4 mm)\u003c\/li\u003e\n\u003cli\u003eWeight approximately 45 lbs (20.45 kgs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details\u003c\/h2\u003e\u003cp\u003eThe Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line focuses on providing rotors with a complete protective coating to combat rust and corrosion. This product line is designed for vehicles requiring durable, vented rotors with a smooth braking surface and coated hats to maintain structural integrity and appearance over time. The full coating helps maintain rotor performance in harsh environments, making it suitable for a variety of vehicle applications.\u003c\/p\u003e\u003ch2\u003eTechnical Description and Specifications\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor features a vented design with straight vanes that facilitate efficient heat dissipation during braking, reducing the risk of brake fade. The smooth surface finish ensures consistent pad contact and braking performance. The rotor’s nominal thickness is 1.437 inches (36.5 mm), with a discard thickness of 1.320 inches (33.53 mm), indicating when replacement is necessary. The rotor mounts behind the hub with 10 bolt holes arranged on a 7.252-inch (184.2 mm) bolt circle diameter. The hat is coated and shaped to accommodate an ABS tone ring, although the tone ring itself is not included. Overall dimensions and weight are optimized for compatibility with specific vehicle models requiring these specifications.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicle Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors causing brake pulsation or noise\u003c\/li\u003e\n\u003cli\u003eUpgrading corroded rotors to fully coated versions for improved longevity\u003c\/li\u003e\n\u003cli\u003eAddressing rotor thickness below discard limits to restore safe braking\u003c\/li\u003e\n\u003cli\u003eSuitable for vehicles requiring vented rotors with 10 mounting bolts and specific diameter dimensions\u003c\/li\u003e\n\u003cli\u003eIdeal for applications needing rotors compatible with ABS systems (tone ring tapped)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is measured before installation to confirm it meets nominal specifications. The rotor mounts behind the hub using 10 bolts on a 7.252-inch bolt circle diameter. Proper torque specifications should be followed to avoid warping. Since the ABS tone ring is not included, verify the existing tone ring condition or source separately if needed. Clean the rotor surface before installation to remove any protective coatings or residues that may affect braking performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eCentric rotors are manufactured to meet or exceed OEM standards for fit, form, and function. The full coating process provides corrosion resistance to extend rotor life. While specific warranty details are not provided here, Centric typically offers limited warranties covering defects in materials and workmanship. Refer to Centric’s official documentation for exact warranty terms.\u003c\/p\u003e","brand":"Centric","offers":[{"title":"Default Title","offer_id":51716595089589,"sku":"BKNJ-320.80001F","price":125.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/CE_32080001F_Fro.jpg?v=1774636313","url":"https:\/\/www.partcatalog.com\/products\/centric-320-80001f-disc-brake-rotor-front-or-rear","provider":"PartCatalog","version":"1.0","type":"link"}