{"product_id":"dynamic-friction-631-27019r-disc-brake-rotor-rear-right","title":"Dynamic Friction 631-27019R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe Dynamic Friction 631-27019R is a rear right disc brake rotor for select Volvo applications. It combines a slotted and drilled surface with a zinc silver hat finish and rust-resistant coating for a clean, service-ready appearance.\u003c\/p\u003e\u003cp\u003eCompatible with Volvo C70, S70, V70, and 850 applications listed below, this rotor is built around the specified 295 mm outside diameter and 5-lug, 108 mm bolt pattern. The 631-27019R is a fitment-specific replacement for drivers looking for a direct rotor match on the rear right side.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSlotted and drilled brake surface for consistent pad contact and heat management.\u003c\/li\u003e\n\u003cli\u003eZinc silver hat finish with rust-resistant coating for added corrosion protection.\u003c\/li\u003e\n\u003cli\u003eSolid rotor design with a 295 mm outside diameter.\u003c\/li\u003e\n\u003cli\u003e5-lug construction with 108 mm bolt circle and 14.75 mm bolt holes.\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for application-specific installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eDynamic Friction 631-27019R is a disc brake rotor engineered for rear right fitment on select Volvo C70, S70, V70, and 850 models. The slotted X-drilled surface is paired with a plain disc finish and a zinc silver hat finish, giving the rotor a functional design with corrosion resistance where it matters most. The solid rotor construction, 72 mm overall height, and 68 mm center hole diameter match the listed application requirements.\u003c\/p\u003e\u003cp\u003eThis part number, 631-27019R, is specified for vehicles with the fitment notes shown in the application table, including C70 and S70 models with 280 mm or 302 mm front rotors. If you are replacing a worn rear right rotor on a Volvo C70, Volvo S70, or Volvo V70, this rotor provides the dimensions and surface design needed for the listed applications. This part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrake pulsation caused by uneven rotor wear.\u003c\/li\u003e\n\u003cli\u003eReduced braking consistency from a worn rear rotor surface.\u003c\/li\u003e\n\u003cli\u003eSurface corrosion on the rotor hat and exposed metal areas.\u003c\/li\u003e\n\u003cli\u003eFitment issues from incorrect bolt pattern or center bore dimensions.\u003c\/li\u003e\n\u003cli\u003eNoise or pad contact problems related to an out-of-spec rotor surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the rear right position and match the vehicle notes before ordering. Confirm the 5-lug, 108 mm bolt circle, 68 mm center hole, and listed rotor dimensions against the existing part. Because the brake surface is directional, install it according to the application-specific orientation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamic Friction supplies brake components with application-specific engineering and corrosion-resistant finishes for service replacement use. Confirm all fitment details for the Volvo C70, S70, V70, or 850 before installation.\u003c\/p\u003e","brand":"Dynamic Friction","offers":[{"title":"Default Title","offer_id":53627795374261,"sku":"HBHR-631-27019R","price":87.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63127019R_Fro.jpg?v=1793251653","url":"https:\/\/www.partcatalog.com\/products\/dynamic-friction-631-27019r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}