{"product_id":"dynamic-friction-633-74048r-disc-brake-rotor","title":"Dynamic Friction 633-74048R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eRear Right Drilled and Slotted Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamic Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-74048R, is a rear right disc brake rotor for select Porsche Cayenne, Volkswagen Touareg, and Audi Q7 applications. It combines a vented rotor design with a directional slotted and drilled surface to support consistent braking performance and heat management in demanding street use.\u003c\/p\u003e\u003cp\u003eWith a zinc black hat finish and rust resistant coating, this rotor is built for drivers replacing a worn rear right rotor on vehicles such as the Porsche Cayenne, Volkswagen Touareg, or Audi Q7. The 330 mm outside diameter, 5-lug pattern, and 130 mm bolt circle are key fitment details for the listed applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number 633-74048R\u003c\/li\u003e\n\u003cli\u003eRear right disc brake rotor\u003c\/li\u003e\n\u003cli\u003eSlotted X drilled surface type\u003c\/li\u003e\n\u003cli\u003eVented rotor construction\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface\u003c\/li\u003e\n\u003cli\u003eZinc black hat finish\u003c\/li\u003e\n\u003cli\u003eRust resistant coating\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 130 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003e330 mm outside diameter\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter: 85 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line from Dynamic Friction focuses on replacement rotors with a performance-oriented surface pattern and corrosion protection. This rotor uses a plain disc finish with a black-coated hat section, making it a practical choice for rear brake service where fitment and rotor finish both matter.\u003c\/p\u003e\u003ch2\u003eDetailed Description\u003c\/h2\u003e\u003cp\u003eDesigned for direct replacement on specific rear right brake positions, this rotor matches applications across the Porsche Cayenne, Volkswagen Touareg, and Audi Q7 platform families. Confirmed fitment includes 2003-2006 Porsche Cayenne, 2004-2007 Volkswagen Touareg, 2007-2015 Audi Q7, 2008-2018 Porsche Cayenne, and 2010-2017 Volkswagen Touareg, along with several configuration-specific variants such as Platinum, Platinum Edition, and models with iron brake rotors. The part number 633-74048R is built around a 28 mm nominal thickness and 26 mm discard thickness, helping you verify service limits during brake maintenance.\u003c\/p\u003e\u003cp\u003eThis part cross-references Monroe Shocks \u0026amp; Struts (e.g., 172286, 182286) for the same application.\u003c\/p\u003e\u003ch2\u003eWhat It Helps Address\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear brake rotor wear on Porsche Cayenne, Volkswagen Touareg, and Audi Q7 vehicles\u003c\/li\u003e\n\u003cli\u003eBrake pulsation caused by rotor surface irregularities\u003c\/li\u003e\n\u003cli\u003eCorrosion on exposed rotor hat surfaces\u003c\/li\u003e\n\u003cli\u003eHeat buildup during repeated braking\u003c\/li\u003e\n\u003cli\u003eFitment issues when replacing a rear right vented rotor with the correct bolt pattern and dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eVerify the rear right position before installation and compare the rotor dimensions to the removed part, including outside diameter, center hole diameter, bolt circle diameter, and thickness. This rotor is directional, so install it in the correct orientation for the vehicle side. Check caliper configuration and model notes carefully for Porsche Cayenne and Volkswagen Touareg applications, especially on vehicles with special editions or brake package variations.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eUse the listed dimensions and fitment notes to confirm application accuracy before service. The rust resistant coating and zinc black hat finish support long-term appearance and corrosion protection in normal brake service conditions.\u003c\/p\u003e","brand":"Dynamic Friction","offers":[{"title":"Default Title","offer_id":43389650305205,"sku":"HBHR-633-74048R","price":103.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63374048R_Fro.jpg?v=1774634575","url":"https:\/\/www.partcatalog.com\/products\/dynamic-friction-633-74048r-disc-brake-rotor","provider":"PartCatalog","version":"1.0","type":"link"}