{"product_id":"dynamite-friction-631-13000r-disc-brake-rotor-front-right","title":"Dynamite Friction 631-13000R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor 631-13000R\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-13000R) is engineered for vehicles requiring reliable vented disc brake rotors with enhanced heat dissipation. Designed with a directional, slotted and drilled surface, this rotor supports improved braking performance and durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVented disc brake rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 18 mm and discard thickness of 16 mm\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized braking efficiency\u003c\/li\u003e\n\u003cli\u003eZinc silver hat finish with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003eBolt hole diameter 10x1.25 mm, 4 bolt holes, 4 stud\/lug holes\u003c\/li\u003e\n\u003cli\u003eOverall height and height both 44 mm, outside diameter 242 mm\u003c\/li\u003e\n\u003cli\u003eBolt circle diameter and stud\/lug hole circle diameter of 90 mm\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 70 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Silver Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and slots to aid in heat dissipation and debris removal. This design helps maintain consistent braking performance under demanding conditions. The silver zinc coating on the rotor hat provides corrosion resistance, extending the rotor's service life. This product line is suitable for applications where vented rotors are preferred to improve cooling and reduce brake fade.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis vented rotor features a nominal thickness of 18 mm with a discard thickness of 16 mm, ensuring a clear service limit for safe operation. The rotor's directional surface pattern, combining drilled holes and slots, enhances water and gas evacuation from the braking surface. The rotor measures 242 mm in outside diameter and 44 mm in height, with a center hole diameter of 70 mm. It includes 4 bolt holes with a diameter of 10x1.25 mm and a bolt circle diameter of 90 mm, matching common fitments requiring these specifications.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReduces brake fade during high-temperature braking conditions\u003c\/li\u003e\n\u003cli\u003eImproves water and debris evacuation for consistent braking in wet conditions\u003c\/li\u003e\n\u003cli\u003eHelps prevent rotor warping by enhancing heat dissipation\u003c\/li\u003e\n\u003cli\u003eProvides corrosion resistance to extend rotor lifespan\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicles requiring 4-lug vented rotors with 242 mm diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 16 mm before installation. Verify bolt hole pattern and diameter compatibility with your vehicle's hub assembly. Clean the rotor surface of any protective coatings or oils before mounting to ensure optimal brake pad contact. Properly torque lug nuts to manufacturer specifications to avoid rotor warping.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 631-13000R rotor with rust-resistant zinc silver coating on the hat and a plain disc finish to maintain structural integrity. The vented design and directional drilled and slotted surface are engineered to meet industry standards for performance and durability. Warranty information is available through Dynamite Friction and should be confirmed at the point of purchase.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51726958887093,"sku":"HBHR-631-13000R","price":72.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63113000R_Fro.jpg?v=1774640248","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-13000r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}