{"product_id":"dynamite-friction-631-31041r-disc-brake-rotor-rear-right","title":"Dynamite Friction 631-31041R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eReliable Brake Performance for BMW 750iL and Z8\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-31041R) is engineered to provide consistent braking performance for BMW 750iL and Z8 models. Designed with precision, this vented disc brake rotor offers enhanced heat dissipation and improved stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisc Type: Vented, drilled and slotted surface for optimal heat management\u003c\/li\u003e\n\u003cli\u003eNominal Thickness: 20 mm with a discard thickness of 18.4 mm\u003c\/li\u003e\n\u003cli\u003eOverall Diameter: 328 mm with a height of 61 mm\u003c\/li\u003e\n\u003cli\u003eBolt Pattern: 5 lug holes with 14.7 mm diameter and 120 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eRust Resistant Zinc Silver Hat Finish with plain disc finish\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for improved water and debris evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the DFC Brake Rotor - Drilled and Slotted - Silver Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on delivering rotors that combine drilled and slotted surfaces with corrosion-resistant coatings. This product line is designed to enhance braking efficiency and rotor longevity, particularly for performance-oriented vehicles like the BMW 750iL and Z8. The zinc silver hat finish adds an extra layer of protection against rust, maintaining rotor integrity over time.\u003c\/p\u003e\u003ch2\u003eTechnical Details and Specifications\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor features a vented design that improves airflow to reduce heat buildup during braking. The drilled and slotted surface helps to dissipate gases and debris, maintaining consistent pad contact and reducing brake fade. With a nominal thickness of 20 mm and a discard thickness of 18.4 mm, the rotor ensures reliable service life and safety. The rotor’s 328 mm outside diameter and 61 mm height are tailored to fit the braking system specifications of BMW 750iL and Z8 models. The 5-bolt hole pattern with a 120 mm bolt circle diameter and 14.7 mm bolt hole diameter ensures precise fitment and secure mounting.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with BMW 750iL and Z8 models requiring vented, drilled, and slotted rotors\u003c\/li\u003e\n\u003cli\u003eAddresses brake fade caused by excessive heat during aggressive driving or towing\u003c\/li\u003e\n\u003cli\u003eHelps reduce brake dust buildup and improves pad bite consistency\u003c\/li\u003e\n\u003cli\u003eMinimizes corrosion with rust-resistant zinc silver hat finish\u003c\/li\u003e\n\u003cli\u003eImproves water and debris evacuation with directional surface design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 18.4 mm before installation. Clean the rotor surface to remove any protective coatings or oils prior to mounting. Verify the 5-lug bolt pattern and 120 mm bolt circle diameter match your vehicle’s hub specifications. Directional rotors must be installed following the indicated rotation direction for optimal performance. Use proper torque specifications on lug nuts to avoid rotor warping.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 631-31041R rotor to meet OEM standards for fit, form, and function. The rust-resistant coating and vented design contribute to durability and consistent braking performance. Please refer to Dynamite Friction’s warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51810602451125,"sku":"HBHR-631-31041R","price":109.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63131041R_Fro.jpg?v=1774642938","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-31041r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}