{"product_id":"dynamite-friction-631-37008r-disc-brake-rotor-front-right","title":"Dynamite Friction 631-37008R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-37008R) is engineered for reliable braking performance on select Acura, Honda, and Isuzu vehicles. Designed with a vented, directional surface, this rotor enhances heat dissipation and braking consistency for models like the Honda Passport and Isuzu Rodeo.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVented disc brake rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 26 mm and discard thickness of 24.6 mm\u003c\/li\u003e\n\u003cli\u003eDirectional braking surface for optimized performance\u003c\/li\u003e\n\u003cli\u003eZinc silver hat finish with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003eCompatible bolt pattern: 6 bolt holes, 12x1.25 mm diameter\u003c\/li\u003e\n\u003cli\u003eOutside diameter of 280 mm and overall height of 36 mm\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 88.6 mm and bolt circle diameter of 108 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver is a vented rotor designed to improve heat dissipation during braking, reducing the risk of brake fade. The rotor features a drilled and slotted surface that helps evacuate gases, dust, and water, maintaining consistent contact with brake pads. The directional surface design ensures optimal performance when installed in the correct orientation. The rotor’s hat is finished in zinc silver, providing corrosion resistance, while the entire rotor is coated to resist rust and extend service life. With a nominal thickness of 26 mm and a discard thickness of 24.6 mm, this rotor meets precise wear specifications for safe operation.\u003c\/p\u003e\u003ch2\u003eDFC Brake Rotor - Drilled and Slotted - Silver Product Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line from Dynamite Friction focuses on rotors that combine drilled holes and slots with a vented design to enhance braking efficiency and heat management. This product line is tailored for drivers seeking rotors that maintain performance under demanding conditions, such as those encountered by Acura, Honda, and Isuzu vehicles listed in the fitment. The silver zinc finish adds a layer of protection against corrosion, making these rotors suitable for various driving environments.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cp\u003eThis rotor is compatible with several Acura, Honda, and Isuzu models, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAcura SLX\u003c\/li\u003e\n\u003cli\u003eHonda Passport, Axiom, and Trooper\u003c\/li\u003e\n\u003cli\u003eIsuzu Amigo, Rodeo, and VehiCROSS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is designed to address common braking issues such as uneven rotor wear, brake fade, and reduced stopping power caused by heat buildup.\u003c\/p\u003e\u003ch2\u003eCommon Issues Addressed by This Rotor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrake fade due to excessive heat during heavy braking\u003c\/li\u003e\n\u003cli\u003eUneven rotor surface wear leading to vibration or noise\u003c\/li\u003e\n\u003cli\u003eCorrosion and rust buildup reducing rotor lifespan\u003c\/li\u003e\n\u003cli\u003eReduced braking efficiency in wet conditions\u003c\/li\u003e\n\u003cli\u003eWarping caused by thermal stress\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor is installed with the directional surface oriented correctly according to the vehicle manufacturer’s specifications. Verify bolt hole alignment with the 6-bolt, 12x1.25 mm pattern and confirm the center hole diameter of 88.6 mm fits the hub. Measure rotor thickness before installation to ensure it meets or exceeds the discard thickness of 24.6 mm. Proper torque specifications should be followed to avoid rotor warping.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures this rotor to meet industry standards for durability and performance. The rust-resistant zinc silver coating helps extend the rotor’s service life. Please refer to Dynamite Friction’s warranty policy for specific coverage details related to the 631-37008R part number.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51726959673525,"sku":"HBHR-631-37008R","price":103.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63137008R_Fro.jpg?v=1774640253","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-37008r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}