{"product_id":"dynamite-friction-631-40014r-disc-brake-rotor-rear-right","title":"Dynamite Friction 631-40014R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of the DFC Brake Rotor for Dodge Viper\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-40014R) is engineered specifically for the Dodge Viper. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance braking performance and heat dissipation under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Dodge Viper models\u003c\/li\u003e\n\u003cli\u003eDirectional drilled and slotted surface for improved brake pad bite and debris removal\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce heat buildup\u003c\/li\u003e\n\u003cli\u003eRust-resistant zinc silver hat finish\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 21.84 mm with a discard thickness of 20.4 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 330 mm and height of 43.6 mm\u003c\/li\u003e\n\u003cli\u003e6 bolt holes with a bolt circle diameter of 114.3 mm\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 73.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Silver Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and slots on the braking surface. This design helps to evacuate gases, dust, and water more efficiently than plain rotors, contributing to consistent braking performance. The silver zinc coating on the rotor hat provides corrosion resistance, extending the rotor's service life, especially in environments prone to rust.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented, allowing air to flow between the rotor surfaces to dissipate heat generated during braking. The rotor's nominal thickness is 21.84 mm, with a discard thickness of 20.4 mm, ensuring safe replacement intervals. The rotor surface is directional, meaning it is designed to rotate in a specific direction to optimize slot and drill performance. The rotor has six bolt holes with a bolt circle diameter of 114.3 mm, matching the Dodge Viper's hub specifications. The zinc silver finish on the rotor hat offers rust resistance, while the plain disc finish maintains a clean braking surface.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eImproves braking response and reduces brake fade on Dodge Viper vehicles\u003c\/li\u003e\n\u003cli\u003eHelps prevent brake pad glazing by maintaining cooler rotor temperatures\u003c\/li\u003e\n\u003cli\u003eReduces buildup of brake dust and debris for consistent pad contact\u003c\/li\u003e\n\u003cli\u003eMinimizes corrosion on rotor hats to extend rotor lifespan\u003c\/li\u003e\n\u003cli\u003eAddresses vibration issues caused by uneven rotor wear or heat spots\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor is installed with the directional surface oriented correctly according to the vehicle's rotation. Verify that the bolt hole pattern and center hole diameter match the Dodge Viper hub before installation. It is recommended to inspect brake pads and hardware during rotor replacement to maintain optimal braking system performance. Proper torque specifications should be followed when securing the rotor to avoid warping.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 631-40014R rotor to meet or exceed OEM specifications for the Dodge Viper. The rust-resistant coating and vented design contribute to durability and consistent performance. Please refer to Dynamite Friction's warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51794120179893,"sku":"HBHR-631-40014R","price":103.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63140014R_Fro.jpg?v=1774641408","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-40014r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}