{"product_id":"dynamite-friction-631-54261l-disc-brake-rotor-front-left","title":"Dynamite Friction 631-54261L Disc Brake Rotor - Front Left","description":"\u003ch2\u003eOverview of the DFC Brake Rotor for Ford Focus\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-54261L) is engineered for reliable braking performance on Ford Focus models. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under various driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Focus vehicles\u003c\/li\u003e\n\u003cli\u003eVented disc brake rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 25 mm and discard thickness of 23 mm\u003c\/li\u003e\n\u003cli\u003e350 mm outside diameter with 5 bolt holes (13.7 mm diameter)\u003c\/li\u003e\n\u003cli\u003eZinc silver hat finish with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized braking efficiency\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 63.5 mm and bolt circle diameter of 108 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Silver Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and slots to improve brake pad bite and reduce heat buildup. The silver zinc coating on the hat area provides corrosion resistance, extending rotor life. This product line is designed to meet the demands of daily driving and moderate performance needs, making it suitable for Ford Focus owners seeking a balance of durability and braking consistency.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented to allow air circulation between the rotor faces, which helps dissipate heat generated during braking. The rotor’s surface is both drilled and slotted, which aids in removing brake dust, gases, and water from the contact area, improving braking response. The rotor measures 350 mm in outside diameter and has a height of 49.4 mm. It features a nominal thickness of 25 mm and a discard thickness of 23 mm, ensuring safe replacement intervals. The rotor includes five bolt holes with a diameter of 13.7 mm and a bolt circle diameter of 108 mm, matching the Ford Focus hub specifications. The zinc silver hat finish and rust-resistant coating protect against corrosion, maintaining rotor integrity over time.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Ford Focus models\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to reduce brake fade during extended use\u003c\/li\u003e\n\u003cli\u003eHelps eliminate brake noise caused by glazing or uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003eMaintains consistent braking performance in wet or dusty conditions\u003c\/li\u003e\n\u003cli\u003eAddresses rotor corrosion issues with rust-resistant coating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 23 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants prior to mounting. Verify that the bolt hole pattern and center hole diameter match the vehicle hub specifications. Use proper torque settings on the lug nuts to avoid rotor warping. It is recommended to replace brake pads when installing new rotors to ensure optimal braking performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (631-54261L) is manufactured to meet OEM standards for fitment and performance on Ford Focus vehicles. The rotor includes a rust-resistant coating and zinc silver hat finish to enhance durability. Warranty information is available from the manufacturer and should be consulted for specific coverage details.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51794145935541,"sku":"HBHR-631-54261L","price":124.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63154261L_Fro.jpg?v=1774641571","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-54261l-disc-brake-rotor-front-left","provider":"PartCatalog","version":"1.0","type":"link"}