{"product_id":"dynamite-friction-631-54281r-disc-brake-rotor-front-right","title":"Dynamite Friction 631-54281R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-54281R) is engineered for reliable braking performance on Ford and Lincoln vehicles. Designed specifically for models like the Bronco Sport, Corsair, and Escape, this rotor combines durability with enhanced heat dissipation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVented disc brake rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized braking efficiency\u003c\/li\u003e\n\u003cli\u003eRust-resistant zinc silver hat finish\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 27 mm with discard thickness at 25 mm\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 13.75 mm diameter and 108 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOutside diameter of 308 mm and height of 50.7 mm\u003c\/li\u003e\n\u003cli\u003ePlain disc finish for consistent braking surface\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 63.5 mm for precise fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Silver Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that provide improved heat dissipation and braking response through a combination of drilled holes and slots. This design helps reduce brake fade and maintain consistent performance under demanding conditions. The zinc silver hat finish adds corrosion resistance, extending rotor life especially in environments prone to rust.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis vented rotor features a directional surface with both drilled holes and slots, which work together to evacuate gases and debris from the braking surface. The nominal thickness of 27 mm ensures structural integrity, while the discard thickness of 25 mm indicates when replacement is necessary to maintain safety. The rotor’s 5-bolt hole pattern with a 13.75 mm diameter and 108 mm bolt circle diameter matches the factory specifications for Ford Bronco Sport, Lincoln Corsair, and Ford Escape models. The zinc silver coating on the hat area provides rust resistance, helping to preserve the rotor’s appearance and function over time.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement rotor for Ford Bronco Sport disc brake systems\u003c\/li\u003e\n\u003cli\u003eSuitable for Lincoln Corsair braking upgrades or maintenance\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford Escape models requiring vented, drilled, and slotted rotors\u003c\/li\u003e\n\u003cli\u003eIdeal for addressing brake fade and improving heat dissipation\u003c\/li\u003e\n\u003cli\u003eUsed to restore braking performance and reduce rotor warping\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is measured before installation; replace if below the discard thickness of 25 mm. Clean the rotor surface to remove any protective coatings before mounting. Confirm the 5-lug bolt pattern and bolt circle diameter match your vehicle’s hub. Proper torque specifications should be followed to avoid rotor warping. Directional rotors must be installed with the correct rotation direction for optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDynamite Friction rotors are manufactured to meet OEM standards for fit and function. The rust-resistant coating and vented design contribute to long service life. Please refer to Dynamite Friction’s warranty policy for specific coverage details related to the 631-54281R rotor.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51794146656437,"sku":"HBHR-631-54281R","price":114.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63154281R_Fro.jpg?v=1774641578","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-54281r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}