{"product_id":"dynamite-friction-631-67029r-disc-brake-rotor-rear-right","title":"Dynamite Friction 631-67029R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of the DFC Brake Rotor for Nissan 240SX\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-67029R) is engineered for Nissan 240SX models requiring reliable braking performance. This solid disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan 240SX vehicles\u003c\/li\u003e\n\u003cli\u003ePart number 631-67029R for precise identification\u003c\/li\u003e\n\u003cli\u003eDirectional drilled and slotted surface for improved brake pad contact\u003c\/li\u003e\n\u003cli\u003eSolid rotor design with zinc silver hat finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRust resistant coating to extend rotor life\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 9 mm with discard thickness at 8 mm\u003c\/li\u003e\n\u003cli\u003eFour bolt holes with a bolt circle diameter of 114.3 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 258 mm and height of 44.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Silver Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and slots on the braking surface. This design helps to reduce brake fade by allowing gases and debris to escape, while also improving water dispersion during wet conditions. The silver zinc coating on the rotor hat provides additional protection against rust, making it suitable for daily driving and spirited use on Nissan 240SX vehicles.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is a solid type with a nominal thickness of 9 mm and a discard thickness of 8 mm, ensuring it meets safety standards for wear limits. The rotor’s surface is both drilled and slotted in a directional pattern, which optimizes braking efficiency and pad bite. The rotor measures 258 mm in outside diameter and 44.3 mm in overall height, with a center hole diameter of 68 mm. It features four bolt holes and lug holes with a diameter of 12.75 mm, arranged on a 114.3 mm bolt circle diameter, matching the Nissan 240SX hub specifications.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or warped rotors on Nissan 240SX models\u003c\/li\u003e\n\u003cli\u003eAddresses brake fade caused by overheating during aggressive driving\u003c\/li\u003e\n\u003cli\u003eImproves braking performance in wet conditions by dispersing water\u003c\/li\u003e\n\u003cli\u003eReduces brake dust accumulation with slotted surface design\u003c\/li\u003e\n\u003cli\u003ePrevents rust and corrosion with zinc silver hat finish and rust resistant coating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 8 mm before installation. Clean the rotor surface to remove any protective coating residue before mounting. Verify bolt hole alignment with the Nissan 240SX hub and torque lug nuts to manufacturer specifications. Directional rotors must be installed with the correct rotation direction facing forward to maintain optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 631-67029R rotor to meet industry standards for durability and performance. The rust resistant coating and zinc silver finish contribute to long-term reliability. Please refer to Dynamite Friction’s warranty policy for specific coverage details.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51726973337781,"sku":"HBHR-631-67029R","price":66.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63167029R_Fro.jpg?v=1774640271","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-67029r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}