{"product_id":"dynamite-friction-631-67047r-disc-brake-rotor-front-right","title":"Dynamite Friction 631-67047R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-67047R) is engineered for Nissan 240SX vehicles requiring reliable braking performance. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan 240SX models\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for improved brake cooling\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce heat buildup\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 22 mm with a discard thickness of 20 mm\u003c\/li\u003e\n\u003cli\u003eZinc silver hat finish with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with a bolt circle diameter of 114.3 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 257 mm and height of 49.2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: DFC Brake Rotor - Drilled and Slotted - Silver\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and slots to optimize brake pad contact and heat dissipation. This product line is designed to provide consistent braking performance while minimizing rotor warping and brake fade. The silver zinc coating on the rotor hat offers additional corrosion resistance, extending the rotor's service life in various driving environments.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented to allow air circulation between the rotor surfaces, which helps maintain lower operating temperatures during braking. The directional slotted and drilled surface improves water and debris evacuation, enhancing braking efficiency in wet or dusty conditions. The rotor's nominal thickness is 22 mm, with a discard thickness of 20 mm, ensuring safe replacement intervals. The zinc silver hat finish and rust-resistant coating protect against corrosion, preserving rotor integrity over time. The rotor features 5 bolt holes with a bolt circle diameter of 114.3 mm, matching the Nissan 240SX bolt pattern precisely.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Nissan 240SX\u003c\/li\u003e\n\u003cli\u003eImproves brake cooling to reduce fade during spirited driving\u003c\/li\u003e\n\u003cli\u003eAddresses brake noise and vibration caused by uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003eEnhances wet weather braking performance with slotted and drilled design\u003c\/li\u003e\n\u003cli\u003ePrevents rust and corrosion on rotor hats for longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is measured before installation to confirm it meets the minimum discard thickness of 20 mm. Clean the rotor surface to remove any protective coatings or residues before mounting. Verify the bolt hole alignment with the Nissan 240SX hub and torque bolts to manufacturer specifications. Directional rotors must be installed with the correct rotation direction to maintain optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures this rotor to meet or exceed OEM specifications for fit and function. The rust-resistant coating and zinc silver hat finish contribute to durability and corrosion resistance. While no specific warranty information is provided, the rotor is designed for reliable performance and longevity when installed and maintained properly.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51795658932405,"sku":"HBHR-631-67047R","price":87.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63167047R_Fro.jpg?v=1774641663","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-67047r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}