{"product_id":"dynamite-friction-631-67112r-disc-brake-rotor-front-right","title":"Dynamite Friction 631-67112R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-67112R) is engineered for reliable braking performance on Nissan vehicles. Designed specifically for Nissan Kicks, Kicks Play, and Versa models, this vented disc brake rotor offers enhanced heat dissipation and consistent stopping power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal thickness: 22 mm with a discard thickness of 20 mm\u003c\/li\u003e\n\u003cli\u003eVented rotor design for improved cooling\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for optimized brake pad contact\u003c\/li\u003e\n\u003cli\u003eRust-resistant zinc silver hat finish and plain disc finish\u003c\/li\u003e\n\u003cli\u003e4 bolt holes with a 100 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOutside diameter of 258 mm and height of 44.1 mm\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 61 mm\u003c\/li\u003e\n\u003cli\u003eCompatible with Nissan Kicks, Kicks Play, and Versa\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Silver Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and precision slots to improve brake pad bite and reduce heat buildup. This product line is designed to maintain braking efficiency under demanding conditions by promoting better ventilation and debris removal from the rotor surface. The silver zinc coating on the rotor hat enhances corrosion resistance, extending the rotor's service life.\u003c\/p\u003e\u003ch2\u003eProduct Features and Specifications\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor features a vented design that allows air to flow between the rotor surfaces, helping to dissipate heat generated during braking. The directional slotted and drilled surface improves water and gas evacuation, reducing brake fade and maintaining consistent braking performance. The rotor's nominal thickness is 22 mm, with a discard thickness of 20 mm, ensuring safe replacement intervals. The zinc silver finish on the hat provides rust resistance, while the plain finish on the disc surface supports effective braking without additional coatings.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Nissan Kicks, Kicks Play, and Versa models requiring vented disc brake rotors\u003c\/li\u003e\n\u003cli\u003eAddresses brake fade caused by excessive heat during prolonged braking\u003c\/li\u003e\n\u003cli\u003eHelps reduce brake noise and vibration through slotted and drilled surface design\u003c\/li\u003e\n\u003cli\u003ePrevents rust and corrosion on rotor hats for longer durability\u003c\/li\u003e\n\u003cli\u003eMaintains braking performance in wet or adverse weather conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 20 mm before installation. Clean the rotor surface to remove any protective coatings or debris prior to mounting. Verify the bolt hole pattern matches the vehicle’s hub (4 bolt holes with 100 mm bolt circle diameter). Properly torque lug nuts to manufacturer specifications to avoid rotor warping. Directional rotors must be installed with the correct rotation direction for optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures this rotor to meet or exceed OEM specifications for Nissan vehicles. The rust-resistant zinc silver hat finish and vented rotor design contribute to durability and consistent braking performance. While no specific warranty information is provided, the rotor is engineered for reliable service life when installed and maintained according to vehicle manufacturer guidelines.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51795660636341,"sku":"HBHR-631-67112R","price":75.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63167112R_Fro.jpg?v=1774641678","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-67112r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}