{"product_id":"dynamite-friction-631-68010r-disc-brake-rotor-rear-right","title":"Dynamite Friction 631-68010R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-68010R) is engineered for reliable braking performance on INFINITI G35, G37, and Q60 models. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal thickness: 16 mm with a discard thickness of 15 mm\u003c\/li\u003e\n\u003cli\u003eVented rotor design for improved cooling\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for debris removal and heat management\u003c\/li\u003e\n\u003cli\u003eZinc silver hat finish with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with a bolt circle diameter of 114.3 mm\u003c\/li\u003e\n\u003cli\u003eOutside diameter of 330 mm and overall height of 62 mm\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 68 mm and stud\/lug hole diameter of 12.7 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: DFC Brake Rotor - Drilled and Slotted - Silver\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction offers rotors with a plain disc finish and zinc silver coated hats to resist corrosion. These rotors are vented and feature a directional surface pattern combining drilled holes and slots to optimize braking efficiency and rotor longevity. This product line is designed to meet the specific braking demands of performance-oriented vehicles like the INFINITI G35, G37, and Q60.\u003c\/p\u003e\u003ch2\u003eTechnical Description and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is constructed with a nominal thickness of 16 mm and a discard thickness of 15 mm, ensuring safe replacement intervals. The vented design allows air to flow through the rotor, reducing heat buildup during braking. The directional slotted and drilled surface helps evacuate gases, dust, and water from the braking surface, improving pad contact and reducing brake fade. The zinc silver hat finish combined with a rust-resistant coating protects against corrosion, extending the rotor's service life. The rotor's 5-bolt pattern with a 114.3 mm bolt circle diameter matches the factory specifications for INFINITI G35, G37, and Q60 models, ensuring proper fitment and installation.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on INFINITI G35, G37, and Q60 vehicles\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to reduce brake fade during aggressive driving\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent braking performance in wet or dusty conditions\u003c\/li\u003e\n\u003cli\u003eAddresses rotor corrosion issues with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003eRestores proper braking surface for enhanced pad life and stopping power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 15 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants prior to mounting. Verify the 5-lug bolt pattern and 114.3 mm bolt circle diameter match your vehicle specifications. Properly torque lug nuts to manufacturer specifications to avoid rotor warping. It is recommended to replace brake pads when installing new rotors for optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction rotors are manufactured to meet OEM standards for fit and function. The rust-resistant coating and zinc silver hat finish provide durability against corrosion. While no specific warranty information is provided, adherence to discard thickness and proper installation will ensure reliable service life of the rotor 631-68010R on INFINITI G35, G37, and Q60 models.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51795661390005,"sku":"HBHR-631-68010R","price":94.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63168010R_Fro.jpg?v=1774641684","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-68010r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}