{"product_id":"dynamite-friction-631-72036l-disc-brake-rotor-rear-left","title":"Dynamite Friction 631-72036L Disc Brake Rotor - Rear Left","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-72036L) is engineered for Mitsubishi Lancer models requiring reliable braking performance. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mitsubishi Lancer vehicles\u003c\/li\u003e\n\u003cli\u003ePart Number: 631-72036L\u003c\/li\u003e\n\u003cli\u003eVented disc brake rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 22 mm; discard thickness: 20.4 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter: 300 mm; height: 57.5 mm\u003c\/li\u003e\n\u003cli\u003eHat finished in zinc silver with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 114.3 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: DFC Brake Rotor - Drilled and Slotted - Silver\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and slots to improve brake pad bite and reduce heat buildup. The silver zinc coating on the hat provides corrosion resistance, extending rotor life. This product line is designed to meet the demands of drivers who require consistent braking performance and durability, particularly in vehicles like the Mitsubishi Lancer.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented to allow air circulation between the rotor surfaces, which helps dissipate heat generated during braking. The rotor’s surface is both drilled and slotted, which aids in removing brake dust, gases, and water from the contact area, improving braking efficiency. The rotor has a nominal thickness of 22 mm and a discard thickness of 20.4 mm, ensuring safe replacement intervals. The zinc silver hat finish and rust-resistant coating protect against corrosion, maintaining structural integrity over time. The rotor features five bolt holes with a 114.3 mm bolt circle diameter and a center hole diameter of 90 mm, matching Mitsubishi Lancer specifications.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores braking performance on Mitsubishi Lancer models with worn or damaged rotors\u003c\/li\u003e\n\u003cli\u003eReduces brake fade caused by overheating during aggressive driving or heavy braking\u003c\/li\u003e\n\u003cli\u003eImproves water and debris evacuation from the rotor surface for consistent braking in wet conditions\u003c\/li\u003e\n\u003cli\u003ePrevents rust and corrosion that can lead to rotor failure or uneven braking\u003c\/li\u003e\n\u003cli\u003eMaintains proper rotor thickness to ensure safe and effective braking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor surface is clean and free of any contaminants before installation. Verify that the rotor thickness is above the discard thickness of 20.4 mm before reuse. Use proper torque specifications for the 5 lug bolts with a 114.3 mm bolt circle diameter to secure the rotor. The directional slotted and drilled surface should be installed following the rotation direction indicated on the rotor to maintain optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 631-72036L rotor to meet or exceed OEM specifications for Mitsubishi Lancer vehicles. The rust-resistant zinc silver coating and vented design contribute to long service life and reliable braking. Warranty information is available through the manufacturer and should be consulted for specific coverage details.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51795662602421,"sku":"HBHR-631-72036L","price":104.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63172036L_Fro.jpg?v=1774641694","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-72036l-disc-brake-rotor-rear-left","provider":"PartCatalog","version":"1.0","type":"link"}