{"product_id":"dynamite-friction-631-76024r-disc-brake-rotor-front-right","title":"Dynamite Friction 631-76024R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of the DFC Brake Rotor for Toyota Cressida\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-76024R) is engineered for reliable braking performance on Toyota Cressida models. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Cressida vehicles\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for improved brake cooling\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce heat buildup\u003c\/li\u003e\n\u003cli\u003eRust resistant zinc silver hat finish\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 22 mm with discard thickness at 21 mm\u003c\/li\u003e\n\u003cli\u003eFour bolt holes with 100 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 248 mm and center hole diameter of 76.1 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Silver Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and slots to improve brake pad bite and reduce gas buildup during braking. The silver zinc coating on the rotor hat provides corrosion resistance, extending rotor life. This product line is designed to meet the specific braking needs of vehicles like the Toyota Cressida, offering a balance of durability and performance.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented to allow air flow between the rotor surfaces, which helps dissipate heat generated during braking. The rotor’s directional surface pattern, featuring both drilled holes and slots, aids in removing brake dust and gases, improving pad contact and reducing brake fade. The rotor has a nominal thickness of 22 mm and a discard thickness of 21 mm, ensuring safe replacement intervals. The zinc silver hat finish provides rust resistance, maintaining structural integrity and appearance over time. With four bolt holes and a 100 mm bolt circle diameter, this rotor fits securely on the Toyota Cressida hub assembly.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Toyota Cressida models\u003c\/li\u003e\n\u003cli\u003eImproves brake cooling to reduce fade during heavy braking\u003c\/li\u003e\n\u003cli\u003eAddresses brake noise and vibration caused by uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent braking performance in wet or dusty conditions\u003c\/li\u003e\n\u003cli\u003ePrevents rust and corrosion on rotor hats for longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 21 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants prior to mounting. Verify bolt hole alignment with the 100 mm bolt circle diameter and use proper torque specifications for the four lug holes. Directional rotors must be installed with the correct rotation direction to maintain optimal performance. It is recommended to inspect brake pads and hardware during rotor replacement for best results.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 631-76024R rotor to meet industry standards for durability and performance. The rust resistant zinc silver finish on the rotor hat helps protect against corrosion. While specific warranty details are not provided, Dynamite Friction products typically adhere to quality control processes to ensure reliable operation on Toyota Cressida vehicles.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51795672694965,"sku":"HBHR-631-76024R","price":85.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63176024R_Fro.jpg?v=1774641754","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-631-76024r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}