{"product_id":"dynamite-friction-633-39011l-disc-brake-rotor-rear-left","title":"Dynamite Friction 633-39011L Disc Brake Rotor - Rear Left","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-39011L) is engineered for reliable braking performance on select Chrysler, Dodge, and Plymouth vehicles. Designed with a directional, slotted and drilled surface, this rotor enhances heat dissipation and braking consistency for models like the Chrysler Sebring and Dodge Neon.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisc type: Solid disc brake rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 8.8 mm with discard thickness at 7.25 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter: 270 mm with a height of 53.2 mm\u003c\/li\u003e\n\u003cli\u003eHat finish: Zinc black coating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRust resistant coating applied for extended durability\u003c\/li\u003e\n\u003cli\u003eBolt hole quantity: 5 with 14.1 mm diameter, bolt circle diameter 100 mm\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface optimized for improved braking efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: DFC Brake Rotor - Drilled and Slotted - Black\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on rotors that combine drilled holes and slots to improve brake pad bite and heat dissipation. The zinc black hat finish and rust resistant coating help protect the rotor from corrosion, making it suitable for vehicles exposed to varying weather conditions. This product line is tailored for drivers seeking enhanced braking performance with reliable durability.\u003c\/p\u003e\u003ch2\u003eTechnical Description and Specifications\u003c\/h2\u003e\u003cp\u003eThis solid disc brake rotor features a 270 mm outside diameter and a 53.2 mm overall height, designed to fit vehicles requiring a 5-lug bolt pattern with a 100 mm bolt circle diameter. The rotor’s surface is both drilled and slotted, which aids in reducing brake fade by allowing gases and debris to escape during braking. The zinc black hat finish and rust resistant coating extend the rotor’s service life by protecting against corrosion. The nominal thickness of 8.8 mm ensures structural integrity, while the discard thickness of 7.25 mm indicates when replacement is necessary to maintain safe braking performance.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChrysler Breeze, Cirrus, Sebring\u003c\/li\u003e\n\u003cli\u003eDodge Neon, Stratus, PT Cruiser\u003c\/li\u003e\n\u003cli\u003ePlymouth models compatible with 5-lug, 100 mm bolt circle rotors\u003c\/li\u003e\n\u003cli\u003eIdeal for addressing brake noise, vibration, and reduced stopping power\u003c\/li\u003e\n\u003cli\u003eSuitable for vehicles requiring directional, drilled and slotted rotors for improved heat management\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor surface is clean and free of oil or debris before installation. Verify the bolt hole pattern and diameter match your vehicle’s specifications. Use proper torque settings on lug nuts to avoid rotor warping. It is recommended to replace brake pads when installing new rotors to optimize braking performance. Check rotor thickness regularly and replace when it reaches the discard thickness of 7.25 mm.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures this rotor to meet or exceed OEM specifications for fit and function. The rust resistant coating and zinc black hat finish contribute to long-term durability. While specific warranty details are not provided, Dynamite Friction products are generally backed by quality standards consistent with automotive industry requirements.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51810641248437,"sku":"HBHR-633-39011L","price":83.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63339011L_Fro.jpg?v=1774643030","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-39011l-disc-brake-rotor-rear-left","provider":"PartCatalog","version":"1.0","type":"link"}