{"product_id":"dynamite-friction-633-40125r-disc-brake-rotor-front-right","title":"Dynamite Friction 633-40125R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of the DFC Brake Rotor - Drilled and Slotted - Black\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-40125R) is engineered for reliable braking performance on Jeep and Ram vehicles. Designed specifically for models like the Jeep Grand Wagoneer and Ram 1500, this rotor combines durability with enhanced heat dissipation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisc type: Vented disc brake rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 378 mm for optimal fitment\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 30 mm with discard thickness at 28.4 mm\u003c\/li\u003e\n\u003cli\u003eHat finish: Zinc black coating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRust resistant coating applied to extend rotor life\u003c\/li\u003e\n\u003cli\u003eBolt hole quantity: 6 with 17 mm bolt hole diameter\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for improved braking efficiency\u003c\/li\u003e\n\u003cli\u003eBolt circle diameter: 139.7 mm and center hole diameter: 78.5 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 68 mm to match factory specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Black Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction focuses on rotors that feature both drilled holes and slots on the braking surface. This design helps to reduce brake fade by improving heat dissipation and removing debris from the rotor surface. The black zinc coating on the hat area adds a layer of rust resistance, making it suitable for vehicles exposed to varying weather conditions. This rotor line is tailored for drivers who require consistent braking performance on Jeep and Ram trucks and SUVs.\u003c\/p\u003e\u003ch2\u003eProduct Description and Specifications\u003c\/h2\u003e\u003cp\u003eThis vented disc brake rotor is engineered with a 378 mm outside diameter and a nominal thickness of 30 mm, ensuring compatibility with specific Jeep and Ram models including the Grand Wagoneer, Grand Wagoneer L, Wagoneer, Wagoneer L, and Ram 1500. The rotor features a directional surface with drilled holes and slots to enhance braking response and reduce heat buildup during heavy use. The zinc black hat finish and rust resistant coating protect against corrosion, extending the rotor's service life. With six bolt holes sized at 17 mm diameter and a bolt circle diameter of 139.7 mm, this rotor matches factory mounting specifications precisely.\u003c\/p\u003e\u003ch2\u003eCommon Applications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Jeep Grand Wagoneer and Ram 1500 models\u003c\/li\u003e\n\u003cli\u003eImproves braking performance under heavy load or towing conditions\u003c\/li\u003e\n\u003cli\u003eReduces brake fade caused by excessive heat buildup\u003c\/li\u003e\n\u003cli\u003eHelps eliminate brake noise and vibration from uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003eProtects against rust and corrosion in humid or wet environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 28.4 mm before installation. Clean the rotor surface to remove any protective coating residue prior to mounting. Verify bolt hole alignment with the vehicle’s hub using the 6-bolt pattern and 139.7 mm bolt circle diameter. Properly torque lug nuts to manufacturer specifications to avoid rotor warping. Directional rotors must be installed with the correct rotation direction for optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 633-40125R rotor to meet OEM standards for fit and function. The rust resistant coating and zinc black hat finish contribute to long-term durability. While no specific warranty information is provided, this rotor is designed to maintain consistent braking performance and resist premature wear when installed and maintained according to vehicle manufacturer guidelines.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51797412053173,"sku":"HBHR-633-40125R","price":235.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63340125R_Fro.jpg?v=1774641959","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-40125r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}