{"product_id":"dynamite-friction-633-47050l-disc-brake-rotor-front-left","title":"Dynamite Friction 633-47050L Disc Brake Rotor - Front Left","description":"\u003ch2\u003eOverview of the DFC Brake Rotor - Drilled and Slotted - Black\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-47050L) is engineered for Chevrolet Corvette models requiring reliable braking performance. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Chevrolet Corvette vehicles\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for improved brake pad bite and heat management\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce brake fade\u003c\/li\u003e\n\u003cli\u003eBlack zinc-coated hat finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRust resistant coating applied to rotor surface\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 30 mm with a discard thickness of 28 mm\u003c\/li\u003e\n\u003cli\u003eFive bolt holes with 15.2 mm diameter and 120 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOutside diameter of 321 mm and height of 51 mm\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 70.75 mm for precise fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: DFC Brake Rotor - Drilled and Slotted - Black\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on rotors that combine drilled holes and slots with a black zinc-coated hat finish. This combination is designed to provide effective heat dissipation and corrosion resistance, making it suitable for performance-oriented applications such as the Chevrolet Corvette. The vented rotor design further aids in maintaining optimal braking temperatures during extended use.\u003c\/p\u003e\u003ch2\u003eTechnical Description and Specifications\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented to allow air to flow between the rotor surfaces, reducing heat buildup during braking. The directional slotted and drilled surface improves pad bite and helps evacuate gases and debris, which can enhance braking consistency. The rotor’s nominal thickness is 30 mm, with a discard thickness of 28 mm, ensuring a clear service life indicator. The black zinc finish on the hat section provides additional protection against rust, complementing the rust-resistant coating on the rotor surface. With five bolt holes sized at 15.2 mm diameter and a bolt circle diameter of 120 mm, this rotor is designed for precise fitment on Chevrolet Corvette models.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplaces worn or warped rotors on Chevrolet Corvette vehicles\u003c\/li\u003e\n\u003cli\u003eAddresses brake fade caused by excessive heat during aggressive driving\u003c\/li\u003e\n\u003cli\u003eImproves braking performance in wet or debris-prone conditions through slotted and drilled design\u003c\/li\u003e\n\u003cli\u003ePrevents rust and corrosion on rotor surfaces for extended service life\u003c\/li\u003e\n\u003cli\u003eMaintains consistent braking feel with vented rotor construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor surface is clean and free of any protective coatings before installation. Verify that the rotor thickness meets or exceeds the discard thickness of 28 mm to maintain safe braking performance. Use proper torque specifications for the five lug bolts to secure the rotor firmly. It is recommended to inspect brake pads and replace them if worn to optimize the performance of the new rotor. Directional rotors must be installed following the indicated rotation direction for proper function.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 633-47050L rotor to meet industry standards for durability and performance. The rust-resistant coating and zinc black hat finish contribute to corrosion protection, supporting long-term reliability. While specific warranty details are not provided, this rotor is designed to meet the rigorous demands of Chevrolet Corvette braking systems.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51797416837301,"sku":"HBHR-633-47050L","price":135.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63347050L_Fro.jpg?v=1774642001","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-47050l-disc-brake-rotor-front-left","provider":"PartCatalog","version":"1.0","type":"link"}