{"product_id":"dynamite-friction-633-54008l-disc-brake-rotor-front-left","title":"Dynamite Friction 633-54008L Disc Brake Rotor - Front Left","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-54008L) is engineered for reliable braking performance on Ford and Mercury vehicles. Designed specifically for models like the Mustang, Cougar, and Montego, this vented disc brake rotor offers enhanced heat dissipation and consistent stopping power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisc type: Vented, drilled, and slotted for improved cooling and debris removal\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 23.88 mm with a discard thickness of 22.23 mm\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized braking efficiency\u003c\/li\u003e\n\u003cli\u003eRust-resistant zinc black hat finish with a plain disc finish\u003c\/li\u003e\n\u003cli\u003eFive bolt holes with 1\/2-20 diameter and 114.3 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOutside diameter of 287 mm and overall height of 107.5 mm\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 61.7 mm for precise fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the DFC Brake Rotor - Drilled and Slotted - Black Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black product line by Dynamite Friction focuses on rotors that combine drilled and slotted surface designs with a corrosion-resistant black zinc finish on the hat. This combination supports effective heat management and reduces rust formation, making it suitable for vehicles requiring reliable braking under varied driving conditions. The directional surface pattern enhances brake pad contact and performance consistency.\u003c\/p\u003e\u003ch2\u003eDetailed Product Description\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented to allow air circulation between the rotor faces, which helps dissipate heat generated during braking. The drilled and slotted surface design aids in removing brake dust, gas, and water, improving braking response and reducing the risk of brake fade. The rotor’s nominal thickness of 23.88 mm ensures durability, while the discard thickness of 22.23 mm indicates the minimum safe thickness for replacement. The zinc black hat finish provides rust resistance, extending the rotor’s service life. With five bolt holes sized at 1\/2-20 and a bolt circle diameter of 114.3 mm, this rotor is engineered for precise fitment on compatible Ford and Mercury models.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles and Common Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement rotor for Ford Mustang models requiring vented, drilled, and slotted rotors\u003c\/li\u003e\n\u003cli\u003eSuitable for Mercury Cougar and Montego vehicles needing improved brake cooling and performance\u003c\/li\u003e\n\u003cli\u003eAddresses issues such as brake fade during aggressive driving or towing\u003c\/li\u003e\n\u003cli\u003eHelps reduce brake noise and vibration caused by uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003ePrevents rust buildup that can impair braking efficiency over time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 22.23 mm before installation. Clean the rotor surface to remove any protective coating or debris prior to mounting. Verify bolt hole alignment with the vehicle’s hub using the 114.3 mm bolt circle diameter and 1\/2-20 bolt hole size. Directional rotors must be installed following the indicated rotation direction to maintain optimal performance. It is recommended to replace brake pads simultaneously to ensure even wear and braking efficiency.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures this rotor to meet or exceed OEM specifications for fit, form, and function. The rust-resistant zinc black finish on the hat enhances durability against corrosion. While specific warranty details are not provided, Dynamite Friction products typically undergo rigorous quality control to ensure consistent performance and reliability on Ford and Mercury vehicles.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51810644132021,"sku":"HBHR-633-54008L","price":144.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63354008L_Fro.jpg?v=1774643052","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-54008l-disc-brake-rotor-front-left","provider":"PartCatalog","version":"1.0","type":"link"}