{"product_id":"dynamite-friction-633-54063r-disc-brake-rotor-front-right","title":"Dynamite Friction 633-54063R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-54063R) is engineered for reliable braking performance on Ford Fiesta models. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under various driving conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Ford Fiesta vehicles\u003c\/li\u003e\n\u003cli\u003eDirectional drilled and slotted surface for improved brake pad bite and heat management\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce brake fade\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 23 mm with a discard thickness of 21 mm\u003c\/li\u003e\n\u003cli\u003eRust-resistant zinc black hat finish for corrosion protection\u003c\/li\u003e\n\u003cli\u003eFour bolt holes with 13 mm diameter and 108 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOverall rotor diameter of 258 mm and height of 43.9 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: DFC Brake Rotor - Drilled and Slotted - Black\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction offers rotors designed with both drilled holes and slots on the braking surface. This combination helps to evacuate gases, dust, and water more efficiently than plain rotors, contributing to improved braking consistency. The black zinc coating on the rotor hat provides additional rust resistance, extending the rotor's service life, especially in environments prone to corrosion.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented, allowing air to flow between the rotor surfaces to dissipate heat generated during braking. The rotor's nominal thickness is 23 mm, with a discard thickness of 21 mm, indicating when replacement is necessary to maintain safe braking performance. The rotor features a directional surface pattern with drilled holes and slots, which enhances pad bite and helps prevent brake fade. The rotor's hat is finished with a zinc black coating to resist rust, and the plain disc finish ensures compatibility with a wide range of brake pads.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRestores braking performance on Ford Fiesta vehicles with worn or damaged rotors\u003c\/li\u003e\n\u003cli\u003eReduces brake fade during aggressive or repeated braking\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to prevent rotor warping\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent braking in wet or dusty conditions\u003c\/li\u003e\n\u003cli\u003eProtects against corrosion with rust-resistant coating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 21 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants before mounting. Verify bolt hole alignment with the Ford Fiesta hub using the 4-bolt pattern and 108 mm bolt circle diameter. Proper torque specifications should be followed to avoid rotor warping. Directional rotors must be installed with the rotation arrow pointing in the correct direction of wheel rotation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 633-54063R rotor to meet or exceed OEM standards for fit, form, and function. The rust-resistant zinc black finish on the rotor hat enhances durability. While no specific warranty information is provided, Dynamite Friction products are typically backed by quality control processes to ensure reliable performance on Ford Fiesta vehicles.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51813032001717,"sku":"HBHR-633-54063R","price":98.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63354063R_Fro.jpg?v=1774643056","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-54063r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}