{"product_id":"dynamite-friction-633-54289l-disc-brake-rotor-rear-left","title":"Dynamite Friction 633-54289L Disc Brake Rotor - Rear Left","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-54289L) is engineered for reliable braking performance on Ford and Lincoln vehicles. Designed specifically for models like the Ford Bronco, Expedition, F-150, and Lincoln Navigator, this rotor combines durability with enhanced heat dissipation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisc type: Drilled and slotted for improved cooling and debris removal\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 336 mm for precise fitment\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 20 mm with a discard thickness of 18.5 mm\u003c\/li\u003e\n\u003cli\u003eHat finish: Zinc black coating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRust resistant coating applied to extend rotor life\u003c\/li\u003e\n\u003cli\u003eBolt hole quantity: 6 with a bolt hole diameter of 15.7 mm\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized braking efficiency\u003c\/li\u003e\n\u003cli\u003eBolt circle diameter: 135 mm and center hole diameter: 90.1 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 42.6 mm ensuring proper clearance and fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Black Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction focuses on rotors that feature both drilled holes and slots on the braking surface. This design helps to reduce heat buildup and evacuate gases and debris during braking, which can improve rotor longevity and maintain consistent stopping power. The black zinc coating on the hat area adds an extra layer of rust protection, making it suitable for vehicles exposed to varying weather conditions.\u003c\/p\u003e\u003ch2\u003eTechnical Description and Specifications\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is manufactured with a nominal thickness of 20 mm and a discard thickness of 18.5 mm, ensuring it meets safety standards for replacement intervals. The rotor’s 336 mm outside diameter and 42.6 mm height are tailored for specific Ford and Lincoln models, including the Bronco, Expedition, F-150, and Navigator. Featuring six bolt holes with a diameter of 15.7 mm and a bolt circle diameter of 135 mm, the rotor fits securely onto the hub. The directional slotted and drilled surface enhances braking performance by improving heat dissipation and reducing brake fade under demanding conditions.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Ford Bronco, Expedition, F-150, and Lincoln Navigator\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to reduce brake fade during heavy braking\u003c\/li\u003e\n\u003cli\u003eHelps prevent rust and corrosion with zinc black hat finish and rust resistant coating\u003c\/li\u003e\n\u003cli\u003eMaintains consistent braking performance by evacuating gases and debris\u003c\/li\u003e\n\u003cli\u003eRestores proper rotor thickness and surface condition for safe stopping\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor surface and hub are clean and free of debris before installation. Verify that the rotor thickness is above the discard thickness of 18.5 mm before reuse. The directional slotted and drilled surface requires correct orientation during installation to maintain optimal braking performance. Use the six bolt holes with 15.7 mm diameter to secure the rotor firmly. It is recommended to inspect brake pads and hardware during rotor replacement for best results.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures this rotor to meet OEM specifications for fit and function on compatible Ford and Lincoln models. The rust resistant coating and zinc black hat finish contribute to extended rotor life. While no specific warranty information is provided, the rotor is designed to comply with industry standards for safety and durability.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51813033574581,"sku":"HBHR-633-54289L","price":119.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63354289L_Fro.jpg?v=1774643068","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-54289l-disc-brake-rotor-rear-left","provider":"PartCatalog","version":"1.0","type":"link"}