{"product_id":"dynamite-friction-633-58000l-disc-brake-rotor-rear-left","title":"Dynamite Friction 633-58000L Disc Brake Rotor - Rear Left","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-58000L) is engineered for Acura Integra models requiring reliable braking performance. This solid disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura Integra vehicles\u003c\/li\u003e\n\u003cli\u003ePart Number: 633-58000L\u003c\/li\u003e\n\u003cli\u003eSolid disc rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eBlack zinc-coated hat finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized performance\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 10 mm with discard thickness at 8 mm\u003c\/li\u003e\n\u003cli\u003eFour bolt holes with 12.7 mm diameter and 100 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 239 mm and height of 33.7 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: DFC Brake Rotor - Drilled and Slotted - Black\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction offers rotors designed with both drilled holes and slots to improve brake pad bite and reduce heat buildup. The black zinc coating on the rotor hat provides rust resistance, extending the rotor's service life. This product line focuses on solid rotors with directional surfaces, suitable for vehicles like the Acura Integra that demand consistent braking under varied driving conditions.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is constructed as a solid rotor with a nominal thickness of 10 mm and a discard thickness of 8 mm, ensuring safe replacement intervals. The rotor's surface is both drilled and slotted, which helps to evacuate gases and debris from the braking surface, improving pad contact and reducing brake fade. The directional surface design enhances water and dust dispersion during braking. The rotor hat is finished with a zinc black coating to resist rust and corrosion, maintaining structural integrity over time. With four bolt holes sized at 12.7 mm diameter and a bolt circle diameter of 100 mm, this rotor fits securely on the Acura Integra hub assembly. The overall diameter measures 239 mm, with a height of 33.7 mm, matching OEM specifications for proper fitment.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Acura Integra models\u003c\/li\u003e\n\u003cli\u003eImproves braking performance by reducing heat buildup and brake fade\u003c\/li\u003e\n\u003cli\u003eAddresses rotor corrosion issues with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003eEnhances braking consistency in wet or dusty conditions due to directional slotted and drilled design\u003c\/li\u003e\n\u003cli\u003eSuitable for vehicles experiencing uneven pad wear or noise due to rotor surface imperfections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor surface and hub mounting area are clean and free of debris before installation. Verify that the rotor thickness meets or exceeds the discard thickness of 8 mm to maintain safety standards. Use proper torque specifications for the four 12.7 mm bolt holes to secure the rotor firmly. The directional surface requires correct orientation during installation to optimize performance; follow the directional arrow or markings on the rotor. It is recommended to inspect brake pads and replace them if worn to ensure even rotor wear and braking efficiency.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 633-58000L rotor to meet or exceed OEM standards for fit, form, and function. The rust-resistant zinc black coating on the rotor hat enhances durability against corrosion. While no specific warranty information is provided, this rotor is designed for reliable performance and longevity when installed and maintained according to manufacturer guidelines.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51813033705653,"sku":"HBHR-633-58000L","price":71.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63358000L_Fro.jpg?v=1774643069","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-58000l-disc-brake-rotor-rear-left","provider":"PartCatalog","version":"1.0","type":"link"}