{"product_id":"dynamite-friction-633-59054r-disc-brake-rotor-rear-right","title":"Dynamite Friction 633-59054R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-59054R) is engineered for Acura and Honda vehicles, including the MDX, Odyssey, Pilot, and ZDX models. This solid disc brake rotor features a directional, slotted and drilled surface designed to enhance braking performance and heat dissipation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Acura MDX, Honda Odyssey, Pilot, and ZDX\u003c\/li\u003e\n\u003cli\u003ePart Number: 633-59054R\u003c\/li\u003e\n\u003cli\u003eSolid disc rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized performance\u003c\/li\u003e\n\u003cli\u003eRust-resistant zinc black hat finish\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 120mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 11mm and discard thickness of 9mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 334mm and height of 63.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Line Details: DFC Brake Rotor - Drilled and Slotted - Black\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction offers rotors with enhanced surface features such as drilled holes and slots to improve heat dissipation and reduce brake fade. The black zinc coating on the rotor hat provides corrosion resistance, extending the rotor's service life. This product line is designed to meet the demands of Acura and Honda vehicles requiring reliable braking components with improved thermal management.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis rotor is a solid type with a nominal thickness of 11mm and a discard thickness of 9mm, ensuring durability and safety throughout its service life. The rotor's surface is both drilled and slotted, which helps to evacuate gases, dust, and water from the braking surface, improving overall braking efficiency. The directional surface design optimizes the rotor's performance by promoting consistent pad contact and heat dissipation. The zinc black finish on the rotor hat offers rust resistance, which is critical for maintaining structural integrity and appearance over time. The rotor measures 334mm in outside diameter with a 63.8mm overall height and features a 70.1mm center hole diameter. It includes 5 bolt holes with a 120mm bolt circle diameter, matching the stud\/lug hole pattern of the specified Acura and Honda models.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement for worn or warped rotors on Acura MDX, Honda Odyssey, Pilot, and ZDX\u003c\/li\u003e\n\u003cli\u003eImproves braking performance by reducing heat buildup and brake fade\u003c\/li\u003e\n\u003cli\u003eAddresses rotor corrosion issues with rust-resistant coating\u003c\/li\u003e\n\u003cli\u003eEnhances braking consistency with directional drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eSuitable for vehicles experiencing brake noise or vibration due to rotor surface wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor surface and hub are clean and free of debris before installation. Verify the rotor thickness is within specifications, replacing if below the discard thickness of 9mm. Use proper torque settings for the 5 bolt holes with a 120mm bolt circle diameter to avoid warping. It is recommended to replace brake pads when installing new rotors to maintain optimal braking performance. Check for proper fitment on Acura MDX, Honda Odyssey, Pilot, and ZDX models before installation.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 633-59054R rotor to meet OEM standards for fit and function. The rust-resistant zinc black finish and solid rotor construction contribute to long-term durability. While no specific warranty information is provided, this rotor is designed to comply with industry quality requirements for brake components on Acura and Honda vehicles.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51726978547893,"sku":"HBHR-633-59054R","price":105.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63359054R_Fro.jpg?v=1774640293","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-59054r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}