{"product_id":"dynamite-friction-633-63174r-disc-brake-rotor-rear-right","title":"Dynamite Friction 633-63174R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of DFC Brake Rotor for Mercedes-Benz Sprinter\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-63174R) is engineered specifically for Mercedes-Benz Sprinter 1500 and Sprinter 2500 models. Designed to provide reliable braking performance, this rotor features a directional, slotted, and drilled surface to enhance heat dissipation and maintain consistent stopping power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Mercedes-Benz Sprinter 1500 and Sprinter 2500\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled disc surface for improved brake cooling\u003c\/li\u003e\n\u003cli\u003eBlack zinc-coated hat finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRust resistant coating applied to rotor surface\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 18 mm with a discard thickness of 16 mm\u003c\/li\u003e\n\u003cli\u003eSix bolt holes with a 130 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eOutside diameter measures 298 mm with a height of 71.6 mm\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter of 85 mm for precise fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Black Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction focuses on rotors that combine drilled holes and slots to optimize brake pad contact and heat dissipation. This product line is designed to reduce brake fade and improve wet-weather braking performance. The black zinc finish on the rotor hat adds an extra layer of protection against rust, extending the rotor's service life in demanding conditions.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor features a nominal thickness of 18 mm and a discard thickness of 16 mm, ensuring it meets safety standards for wear limits. The rotor's surface is both drilled and slotted in a directional pattern, which helps channel away gases, dust, and water from the braking surface. The rotor's hat is finished with a zinc black coating to resist corrosion, while the rotor surface itself has a rust-resistant coating to maintain durability over time. With six bolt holes arranged on a 130 mm bolt circle diameter, and a center hole diameter of 85 mm, this rotor is engineered for precise fitment on the specified Sprinter models.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement rotor for worn or warped brake rotors on Mercedes-Benz Sprinter 1500 and 2500\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to reduce brake fade during heavy braking\u003c\/li\u003e\n\u003cli\u003eEnhances braking performance in wet conditions by channeling water away\u003c\/li\u003e\n\u003cli\u003ePrevents rust and corrosion to extend rotor lifespan\u003c\/li\u003e\n\u003cli\u003eMaintains consistent braking feel and safety on commercial and passenger Sprinter vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is measured before installation; replace if below the discard thickness of 16 mm. Clean the hub surface before mounting to avoid runout issues. Use proper torque specifications for the six lug bolts to secure the rotor. Directional rotors must be installed with the correct rotation direction to maintain optimal performance. It is recommended to replace brake pads when installing new rotors to ensure even wear and braking efficiency.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-63174R) is manufactured to meet OEM specifications for Mercedes-Benz Sprinter 1500 and 2500 models. The rotor includes a rust-resistant coating and zinc black hat finish to enhance durability. Warranty details are provided by the manufacturer and should be confirmed at the time of purchase.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51813035409589,"sku":"HBHR-633-63174R","price":131.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63363174R_Fro.jpg?v=1774643075","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-63174r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}