{"product_id":"dynamite-friction-633-67092r-disc-brake-rotor-front-right","title":"Dynamite Friction 633-67092R Disc Brake Rotor - Front Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-67092R) is engineered for reliable braking performance on Nissan and Suzuki vehicles. Designed specifically for models like the Nissan Frontier, Pathfinder, Xterra, and Suzuki Equator, this rotor offers enhanced heat dissipation and improved stopping power.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisc type: Vented disc brake rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 28 mm with a discard thickness of 26 mm\u003c\/li\u003e\n\u003cli\u003eOverall height: 38.2 mm and outside diameter: 296 mm\u003c\/li\u003e\n\u003cli\u003eHat finish: Zinc black with rust-resistant coating for durability\u003c\/li\u003e\n\u003cli\u003eBolt hole quantity: 6 with a bolt circle diameter of 114.3 mm\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized performance\u003c\/li\u003e\n\u003cli\u003eCenter hole diameter: 68 mm, stud\/lug hole diameter: 12.8 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Black Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on rotors that combine drilled holes and slots to improve brake pad bite and heat dissipation. The zinc black hat finish and rust-resistant coating extend rotor life by protecting against corrosion, making it suitable for vehicles exposed to various driving conditions. This product line is tailored for drivers seeking rotors that maintain consistent braking performance while managing heat buildup effectively.\u003c\/p\u003e\u003ch2\u003eTechnical Description and Specifications\u003c\/h2\u003e\u003cp\u003eThis vented disc brake rotor features a 296 mm outside diameter and a 38.2 mm overall height, designed to fit the front brake assemblies of Nissan Frontier, Pathfinder, Xterra, and Suzuki Equator models. The rotor’s drilled and slotted surface enhances water and debris evacuation, reducing brake fade during demanding driving. The nominal thickness of 28 mm ensures structural integrity, while the discard thickness of 26 mm indicates the minimum safe thickness for replacement. The zinc black hat finish combined with a rust-resistant coating helps prevent corrosion, maintaining rotor performance over time. The rotor includes six bolt holes with a 114.3 mm bolt circle diameter, matching the factory specifications for the listed vehicles.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReduces brake fade caused by heat buildup during heavy braking\u003c\/li\u003e\n\u003cli\u003eImproves water and debris removal for consistent braking in wet conditions\u003c\/li\u003e\n\u003cli\u003ePrevents rust and corrosion on the rotor surface for longer service life\u003c\/li\u003e\n\u003cli\u003eRestores proper braking performance on Nissan Frontier, Pathfinder, Xterra, and Suzuki Equator\u003c\/li\u003e\n\u003cli\u003eAddresses uneven brake pad wear and vibration issues related to worn rotors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is above the discard thickness of 26 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants before mounting. Verify bolt hole alignment with the vehicle’s hub using the 6-bolt pattern and 114.3 mm bolt circle diameter. Properly torque lug nuts to manufacturer specifications to avoid rotor warping. Directional surface design requires correct orientation during installation for optimal performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures this rotor to meet or exceed OEM specifications for Nissan and Suzuki vehicles. The rust-resistant coating and zinc black hat finish contribute to durability and corrosion resistance. While no specific warranty information is provided, the product is designed for reliable, long-term use under normal driving conditions.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51726978875573,"sku":"HBHR-633-67092R","price":111.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63367092R_Fro.jpg?v=1774640294","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-67092r-disc-brake-rotor-front-right","provider":"PartCatalog","version":"1.0","type":"link"}