{"product_id":"dynamite-friction-633-68009r-disc-brake-rotor-rear-right","title":"Dynamite Friction 633-68009R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Brake Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-68009R) is engineered for reliable braking performance on Infiniti 350Z and Nissan G35 models. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Infiniti 350Z and Nissan G35 vehicles\u003c\/li\u003e\n\u003cli\u003eDirectional drilled and slotted surface for improved brake pad bite and heat management\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce brake fade\u003c\/li\u003e\n\u003cli\u003eBlack zinc-coated hat finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRust resistant coating on the rotor surface\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with a 114.3 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 22 mm and discard thickness of 20.2 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 322 mm and height of 61 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout the DFC Brake Rotor - Drilled and Slotted - Black Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black product line by Dynamite Friction focuses on rotors that combine drilled holes and precision slots to optimize braking efficiency and rotor cooling. The black zinc finish on the rotor hat provides additional protection against rust, extending the rotor's service life. This line is designed to meet the performance and durability needs of sport compact and performance-oriented vehicles like the Infiniti 350Z and Nissan G35.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is vented, allowing air to flow between the rotor surfaces to dissipate heat more effectively during braking. The directional surface pattern, featuring both drilled holes and slots, helps evacuate gases, dust, and water from the braking surface, improving pad contact and reducing brake fade. The rotor's nominal thickness is 22 mm, with a discard thickness of 20.2 mm, ensuring safe replacement intervals. The rotor measures 322 mm in outside diameter and 61 mm in overall height, fitting precisely on the specified vehicle models. The zinc black finish on the hat and rust-resistant coating on the disc surface provide enhanced corrosion protection, which is critical for maintaining rotor integrity over time.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eImproves braking performance on Infiniti 350Z and Nissan G35 vehicles\u003c\/li\u003e\n\u003cli\u003eReduces brake fade during aggressive driving or heavy braking\u003c\/li\u003e\n\u003cli\u003eHelps prevent rotor warping caused by excessive heat buildup\u003c\/li\u003e\n\u003cli\u003eMinimizes corrosion and rust on rotor surfaces for longer service life\u003c\/li\u003e\n\u003cli\u003eEnhances brake pad bite and responsiveness in wet or dusty conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor is installed on compatible Infiniti 350Z or Nissan G35 models using the correct bolt pattern of 5 lug holes with a 114.3 mm bolt circle diameter. Verify the rotor thickness before installation; replace if below the discard thickness of 20.2 mm. Clean the rotor surface to remove any protective coatings or residues before mounting brake pads. Proper torque specifications should be followed for lug nuts to avoid rotor distortion.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 633-68009R rotor to meet industry standards for durability and performance. The rust-resistant coating and zinc black hat finish contribute to extended rotor life. While no specific warranty information is provided, the product is designed to maintain consistent braking performance and safety when installed and maintained according to manufacturer guidelines.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51797534605493,"sku":"HBHR-633-68009R","price":110.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63368009R_Fro.jpg?v=1774642148","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-68009r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}