{"product_id":"dynamite-friction-633-76101r-disc-brake-rotor-rear-right","title":"Dynamite Friction 633-76101R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of the DFC Brake Rotor - Drilled and Slotted - Black\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-76101R) is engineered for Toyota Previa and Supra models. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance braking performance and heat dissipation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Previa and Supra vehicles\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled surface for improved brake pad bite and cooling\u003c\/li\u003e\n\u003cli\u003eVented rotor design to reduce heat buildup during braking\u003c\/li\u003e\n\u003cli\u003eRust-resistant zinc black hat finish for corrosion protection\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with a 114.3 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 18 mm with a discard thickness of 17 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 291 mm and height of 68.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThis DFC Brake Rotor - Drilled and Slotted - Black is constructed with a vented rotor design that allows air to flow between the rotor surfaces, helping to dissipate heat more effectively during heavy braking. The rotor surface is both drilled and slotted, which aids in removing brake dust, gases, and water from the contact area, improving braking consistency and reducing the risk of brake fade. The directional surface pattern is optimized for the rotation direction of the rotor, ensuring maximum performance.\u003c\/p\u003e\u003cp\u003eThe rotor’s hat is finished with a zinc black coating that provides rust resistance, extending the rotor’s service life in various driving conditions. With a nominal thickness of 18 mm and a discard thickness of 17 mm, this rotor meets the necessary safety standards for replacement. The 5-bolt hole configuration with a 114.3 mm bolt circle diameter and 14.5 mm stud hole diameter ensures proper fitment on compatible Toyota Previa and Supra models.\u003c\/p\u003e\u003ch2\u003eDFC Brake Rotor - Drilled and Slotted - Black Product Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on rotors that combine drilled holes and slots with a corrosion-resistant finish. This product line is designed to provide enhanced braking performance through improved heat dissipation and debris removal, while the black zinc coating helps protect against rust. This rotor is a part of that line, offering a balance of durability and functional design for Toyota vehicles.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReduces brake fade caused by excessive heat buildup\u003c\/li\u003e\n\u003cli\u003eImproves braking response in wet or dusty conditions\u003c\/li\u003e\n\u003cli\u003eMinimizes brake pad glazing and uneven wear\u003c\/li\u003e\n\u003cli\u003ePrevents rust and corrosion on the rotor surface\u003c\/li\u003e\n\u003cli\u003eEnsures proper fitment and reliable braking for Toyota Previa and Supra\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eWhen installing the Dynamite Friction 633-76101R rotor, ensure the rotor is mounted with the directional surface pattern aligned to the wheel rotation direction. Verify that the rotor thickness is above the discard thickness of 17 mm before installation. Clean the rotor surface to remove any protective coatings or residues before mounting. Use the correct torque specifications for the 5-bolt pattern with a 114.3 mm bolt circle diameter to secure the rotor properly.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 633-76101R rotor to meet industry standards for safety and performance. The rust-resistant zinc black finish adds durability against corrosion. While no specific warranty information is provided, this rotor is designed to maintain consistent braking performance throughout its service life when installed and maintained correctly.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801061687477,"sku":"HBHR-633-76101R","price":100.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63376101R_Fro.jpg?v=1774642207","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-76101r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}