{"product_id":"dynamite-friction-633-76139l-disc-brake-rotor-rear-left","title":"Dynamite Friction 633-76139L Disc Brake Rotor - Rear Left","description":"\u003ch2\u003eOverview of the DFC Brake Rotor for Toyota Highlander\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-76139L) is engineered specifically for Toyota Highlander models. This solid disc brake rotor features a directional, slotted and drilled surface designed to enhance braking performance and heat dissipation under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Toyota Highlander vehicles\u003c\/li\u003e\n\u003cli\u003ePart number: 633-76139L\u003c\/li\u003e\n\u003cli\u003eSolid rotor with drilled and slotted surface\u003c\/li\u003e\n\u003cli\u003eDirectional brake surface for optimized performance\u003c\/li\u003e\n\u003cli\u003eRust-resistant zinc black hat finish\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 114.3 mm bolt circle diameter\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 10 mm and discard thickness of 8.5 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter of 309 mm and height of 69.9 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetails on the DFC Brake Rotor - Drilled and Slotted - Black Line\u003c\/h2\u003e\u003cp\u003eThe DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction offers rotors designed with enhanced surface features to improve braking efficiency and rotor longevity. The drilled and slotted design helps to reduce brake fade by allowing gases and heat to escape, while the black zinc coating on the rotor hat provides corrosion resistance. This product line is tailored for drivers seeking reliable braking components that maintain performance under varied driving conditions.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications and Features\u003c\/h2\u003e\u003cp\u003eThis disc brake rotor is a solid type with a directional surface, combining drilled holes and slots to improve water and debris evacuation. The rotor’s nominal thickness is 10 mm, with a discard thickness of 8.5 mm, ensuring clear service limits for safety. The rotor’s outside diameter measures 309 mm, and the overall height is 69.9 mm. It features a zinc black finish on the hat for rust resistance and a plain disc finish. The rotor includes five bolt holes with a bolt circle diameter of 114.3 mm and a center hole diameter of 62 mm, matching the Toyota Highlander’s specifications.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement rotor for worn or warped Toyota Highlander brake rotors\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to reduce brake fade during heavy braking\u003c\/li\u003e\n\u003cli\u003eHelps prevent rust and corrosion on rotor hats for longer service life\u003c\/li\u003e\n\u003cli\u003eAddresses brake noise and vibration issues caused by uneven rotor surfaces\u003c\/li\u003e\n\u003cli\u003eMaintains consistent braking performance in wet or dusty conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor surface is clean and free of contaminants before installation. Verify the rotor thickness is within the nominal range and replace if below discard thickness. Use proper torque specifications for the 5 lug bolts with a 114.3 mm bolt circle diameter. Directional rotors must be installed with the correct rotation direction to maintain performance and safety.\u003c\/p\u003e\u003ch2\u003eQuality Assurance\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures this rotor to meet OEM fitment and quality standards for Toyota Highlander vehicles. The rust-resistant zinc black coating on the rotor hat enhances durability. While no specific warranty information is provided, adherence to OEM specifications ensures reliable performance and safety.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801062572213,"sku":"HBHR-633-76139L","price":108.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_63376139L_Fro.jpg?v=1774642215","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-633-76139l-disc-brake-rotor-rear-left","provider":"PartCatalog","version":"1.0","type":"link"}