{"product_id":"dynamite-friction-830-13017r-disc-brake-rotor-rear-right","title":"Dynamite Friction 830-13017R Disc Brake Rotor - Rear Right","description":"\u003ch2\u003eOverview of Dynamite Friction DFC Geoperformance Rotor\u003c\/h2\u003e\u003cp\u003eThe Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-13017R) is engineered for Subaru Impreza models requiring reliable braking performance. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Subaru Impreza vehicles\u003c\/li\u003e\n\u003cli\u003eDirectional slotted and drilled rotor surface\u003c\/li\u003e\n\u003cli\u003eVented rotor design for improved cooling\u003c\/li\u003e\n\u003cli\u003eRust resistant coating for extended durability\u003c\/li\u003e\n\u003cli\u003eGeospec silver grey hat finish\u003c\/li\u003e\n\u003cli\u003eNominal thickness: 20 mm; discard thickness: 18 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter: 316 mm; height: 67.5 mm\u003c\/li\u003e\n\u003cli\u003e5 bolt holes with 12.9 mm diameter and 114.3 mm bolt circle diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDetailed Product Features and Specifications\u003c\/h2\u003e\u003cp\u003eThe 830-13017R rotor from Dynamite Friction is part of the DFC Geoperformance Rotor - Drilled and Slotted line, which focuses on delivering enhanced braking efficiency through advanced rotor surface technology. The drilled and slotted design helps evacuate gases, dust, and water from the braking surface, reducing brake fade and improving pad bite. The vented rotor construction promotes airflow to dissipate heat more effectively, which is critical for maintaining brake performance during extended or aggressive driving.\u003c\/p\u003e\u003cp\u003eThis rotor features a plain disc finish combined with a Geospec silver grey hat finish, providing corrosion resistance and a clean appearance. The rust resistant coating further protects the rotor from environmental damage, extending its service life. With a nominal thickness of 20 mm and a discard thickness of 18 mm, this rotor meets precise wear limits to ensure safe operation. The 5-lug bolt pattern with a 114.3 mm bolt circle diameter and 12.9 mm bolt hole diameter matches Subaru Impreza specifications for direct fitment.\u003c\/p\u003e\u003ch2\u003eApplications and Problem Solving\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement rotor for worn or warped Subaru Impreza disc brakes\u003c\/li\u003e\n\u003cli\u003eImproves heat dissipation to reduce brake fade during heavy braking\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent braking performance in wet or dusty conditions\u003c\/li\u003e\n\u003cli\u003eAddresses rotor corrosion issues with rust resistant coating\u003c\/li\u003e\n\u003cli\u003eEnhances brake pad bite and reduces brake noise with slotted and drilled surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes and Tips\u003c\/h2\u003e\u003cp\u003eEnsure the rotor thickness is measured before installation; replace if below the discard thickness of 18 mm. Clean the rotor surface to remove any protective coatings or contaminants before mounting. Verify bolt hole alignment with the 5-lug 114.3 mm bolt circle diameter pattern on the Subaru Impreza. Proper torque specifications should be followed to avoid rotor warping. It is recommended to inspect brake pads and hardware during rotor replacement for optimal braking system performance.\u003c\/p\u003e\u003ch2\u003eQuality Assurance and Warranty\u003c\/h2\u003e\u003cp\u003eDynamite Friction manufactures the 830-13017R rotor to meet OEM standards for fit and function on Subaru Impreza models. The rust resistant coating and durable finishes contribute to long service life. Warranty details are provided by the manufacturer and should be consulted for specific coverage information.\u003c\/p\u003e","brand":"Dynamite Friction","offers":[{"title":"Default Title","offer_id":51801068830901,"sku":"HBHR-830-13017R","price":126.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/1442\/1173\/files\/DF_83013017R_Fro.jpg?v=1774642268","url":"https:\/\/www.partcatalog.com\/products\/dynamite-friction-830-13017r-disc-brake-rotor-rear-right","provider":"PartCatalog","version":"1.0","type":"link"}